Добірка наукової літератури з теми "Absorption machines"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Absorption machines".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Absorption machines"

1

Ahachad, M., M. Charia, and A. Bernatchou. "Solar absorption heat transformer applications to absorption refrigerating machines." International Journal of Energy Research 17, no. 8 (1993): 719–26. http://dx.doi.org/10.1002/er.4440170806.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Labus, Jerko, Carles Bruno, and Alberto Coronas. "Review on absorption technology with emphasis on small capacity absorption machines." Thermal Science 17, no. 3 (2013): 739–62. http://dx.doi.org/10.2298/tsci120319016l.

Повний текст джерела
Анотація:
The aim of this paper is to review the past achievements in the field of absorption systems, their potential and possible directions for future development. Various types of absorption systems and research on working fluids are discussed in detail. Among various applications, solar cooling and combined cooling, heating and power (CCHP) are identified as two most promising applications for further development of absorption machines. Under the same framework, special attention is given to the small capacity absorption machines and their current status at the market. Although this technology look
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shamarov, M. V., E. G. Stepanova, A. V. Kolinko, and A. M. Shamarov. "Prospects for the use of a membrane refrigeration unit for the production of cold as an alternative to absorption." Herald of Dagestan State Technical University. Technical Sciences 50, no. 4 (2024): 26–36. http://dx.doi.org/10.21822/2073-6185-2023-50-4-26-36.

Повний текст джерела
Анотація:
Objective. The purpose of the study is to determine the prospects for using a membrane refrigeration unit for the production of cold as an alternative to absorption. Method. The study was carried out using a numerical experiment and verification of the results obtained on an experimental bench. Result. An analysis was made of the use of a traditional absorption refrigeration machine and a membrane refrigeration machine from the point of view of energy efficiency and the number of working elements. Presented for comparison are methods for calculating the separation process of the “absorbent-ref
Стилі APA, Harvard, Vancouver, ISO та ін.
4

van de Ven, H. "Absorption machines for future energy systems." International Journal of Refrigeration 22, no. 3 (1999): 244. http://dx.doi.org/10.1016/s0140-7007(98)00064-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Fujita, T. "Falling liquid films in absorption machines." International Journal of Refrigeration 16, no. 4 (1993): 282–94. http://dx.doi.org/10.1016/0140-7007(93)90081-i.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ben Zid, Nihel, Nejib Hajji, and Mohamed El Ganaoui. "COP enhancement and comparison of different absorption cooling systems." MATEC Web of Conferences 330 (2020): 01032. http://dx.doi.org/10.1051/matecconf/202033001032.

Повний текст джерела
Анотація:
The absorption refrigeration machines represent a good alternative to compression refrigeration machines but the major problem of this type of refrigeration lies in the COP, which seems to be less efficient. Several researches are carried out to improve the performances of these machines such as the combination with the technology of the ejectors. In this work, we are interested in the three ammonia-water absorption cycles: Single effect absorption, Ejector-absorption and Combined ejector-flash tank absorption cycles. A gas-gas ejector would be installed between the generator and the condenser
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ben Zid, Nihel, Mohammed El Ganaoui, and Nejib Hajji. "Simulation and comparison of combined ejector-absorption and single effect absorption refrigeration systems." MATEC Web of Conferences 307 (2020): 01008. http://dx.doi.org/10.1051/matecconf/202030701008.

Повний текст джерела
Анотація:
Refrigeration by absorption is gaining more and more importance nowadays especially in applications where the source of energy used in the generator is renewable. However the major problem of this type of refrigeration lies in the COP, which seems to be weaker than compression machines. The use of an ejector is one of the means that can help overcome this problem. In this work, we are interested in the ammonia-water absorption cycle comprising a gas-gas ejector interposed between the generator and the condenser. We suppose that adding a flash tank between the condenser and the evaporator could
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Martı́nez, P. J., and J. M. Pinazo. "A method for design analysis of absorption machines." International Journal of Refrigeration 25, no. 5 (2002): 634–39. http://dx.doi.org/10.1016/s0140-7007(01)00052-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Golasi, Iacopo, Ferdinando Salata, Emanuele de Lieto Vollaro, and Massimo Coppi. "The degradation of ammonia in absorption thermal machines." Energy Procedia 126 (September 2017): 321–28. http://dx.doi.org/10.1016/j.egypro.2017.08.252.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mitchison, Mark T. "Quantum thermal absorption machines: refrigerators, engines and clocks." Contemporary Physics 60, no. 2 (2019): 164–87. http://dx.doi.org/10.1080/00107514.2019.1631555.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Absorption machines"

1

Jakob, Uli. "Investigations into solar powered diffusion-absorption cooling machines." Thesis, De Montfort University, 2005. http://hdl.handle.net/2086/10747.

Повний текст джерела
Анотація:
Solar thermal driven or assisted absorption cooling machines are gaining increasing importance due to the continually growing demand for airconditioning in domestic housing as well as office and hotel buildings. Presently there are no thermally driven absorption cooling machines available on the market that can provide a smaller cooling capacity than 10kW for cooling buildings. For this reason, two single-effect solar heated ammonia/water (NHJlH20) Diffusion-Absorption Cooling Machines (DACM) with a design cooling capacity of 2.SkW at evaporator temperatures between -10°C and +soC were designe
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Rignac, Jean-Paul. "Contribution à l'étude des absorbeurs à film pour les machines à absorption." Toulouse, INPT, 1989. http://www.theses.fr/1989INPT031G.

Повний текст джерела
Анотація:
Cet ouvrage est consacre a l'etude de deux types d'absorbeurs a film, a alimentation tangentielle equipant une pompe a chaleur a absorption. Le gaz circule dans le cur du tube et le refrigerant s'ecoule a contre courant dans la double enveloppe. Albsorbeur de type 1: caracterise par le fait qu'un fil helicoidal est plaque contre la paroi du tube et le refrigerant est anime d'un mouvement spirale. Une etude globale en transfert thermique et en transfert matiere a conduit a la determination de correlations relatives aux coefficients de transfert paroi-solution, paroi-refrigerant et coefficient g
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Vicatos, George. "Heat and mass transfer characteristics: design and optimisation of absorption refrigeration machines." Doctoral thesis, University of Cape Town, 1995. http://hdl.handle.net/11427/17476.

Повний текст джерела
Анотація:
Bibliography: pages 205-209.<br>An extensive literature study on the subject of absorption refrigeration has revealed that there is no proven methodology that can be used to design, optimise and size a plant. On the contrary there are numerous methods which analyse the performance of an existing plant from collected data. These methods however, do not provide any means of predicting how the analysed plant would perform if one or more of its working conditions should change. This work provides a complete design for an ammonia-water absorption refrigeration plant. The ranges of the working condi
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Dardour, Houda. "Étude des machines frigorifiques à absorption et à absorption-diffusion utilisant un mélange d'alcanes : étude systémique et modélisation rigoureuse de l'absorbeur." Thesis, Pau, 2012. http://www.theses.fr/2012PAUU3013/document.

Повний текст джерела
Анотація:
Le présent travail est consacré en premier lieu à l'investigation des limites de fonctionnement et de performances des machines frigorifiques à absorption et absorption-diffusion utilisant des mélanges d'alcanes comme fluides de travail et l'analyse en second lieu du processus d'absorption le long d'un absorbeur à film tombant en présence d'un gaz inerte. Dans le cas d'un refroidissement à l’eau les meilleures performances réalisées sont celles d'une machine utilisant le binaire C₃H₈/n-C₉H₂₀ avec un COP de l'ordre de 0.51 dans l'intervalle de la température de la chaleur motrice [110-125℃]. Un
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wakim, Michel. "Etude des machines à absorption pour la valorisation de la chaleur fatale basse température." Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEM037/document.

Повний текст джерела
Анотація:
Cette thèse vise à étudier la valorisation des rejets thermiques de basse température (inférieure à 100 °C) par les machines à absorption, dont principalement les transformateurs de chaleur à absorption (AHT) pour générer de la chaleur à une température plus élevée, et les cycles de réfrigération par absorption (ARC) pour la production de frigories. Les performances des machines à absorption sont exprimées suivant les températures et les COP qu’elles peuvent atteindre. Ces deux paramètres dépendent de l’architecture de la machine, des composants utilisés et de la paire de fluides réfrigérant-a
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Nanakassé, Sidiki. "Sur l'utilisation du gel de silice dans des machines frigorifiques à affinité : adsorption de l'eau et du méthanol." Dijon, 1986. http://www.theses.fr/1986DIJOS070.

Повний текст джерела
Анотація:
Etude théorique de l'évolution morphologique du gel de silice (Rhône-Poulenc, Prolabo) sous l'action combinée de la température et de la vapeur d'adsorbat (eau, méthanol). Application à la réfrigération. Le système gel de silice-adsorbat (eau, méthanol) est très efficace dans le cas des faibles différences de température entre la source froide et la source chaude, et la source froide et la température de l'évaporateur; mais il est très sensible aux écarts de température au niveau de l'adsorbeur. La faible vitesse d'adsorption entraine quelques difficultés à utiliser ce système pour la mise en
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wang, Yunxin. "Stratégie de modélisation des systèmes de valorisation énergétique : Application aux machines ORC et à absorption." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSEI068.

Повний текст джерела
Анотація:
La consommation énergétique dans l’industrie augmente de nos jours, avec l’amplification des activités industrielles dans le monde. En parallèle, la pénurie des énergies primaires et le réchauffement climatique obligent des exploitations sans cesse des énergies et des techniques alternatives, afin de développer durablement, et de satisfaire l’augmentation de la consommation. Ainsi, l’amélioration de l’utilisation énergétique dans l’industrie devient aussi un sujet important à développer et à étudier. Dans certains sites industriels, les rejets thermiques sont énormément dégagés dans l’environn
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ashrafi, Parivash. "Predicting the absorption rate of chemicals through mammalian skin using machine learning algorithms." Thesis, University of Hertfordshire, 2016. http://hdl.handle.net/2299/17310.

Повний текст джерела
Анотація:
Machine learning (ML) methods have been applied to the analysis of a range of biological systems. This thesis evaluates the application of these methods to the problem domain of skin permeability. ML methods offer great potential in both predictive ability and their ability to provide mechanistic insight to, in this case, the phenomena of skin permeation. Historically, refining mathematical models used to predict percutaneous drug absorption has been thought of as a key factor in this field. Quantitative Structure-Activity Relationships (QSARs) models are used extensively for this purpose. How
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mansouri, Rami. "Theoretical and experimental study of absorption and absorption/diffusion refrigerating machines using ammonia as a refrigerant: simulation under steady-state and dynamic regimes and experimental characterization of a pilot." Doctoral thesis, Universitat Rovira i Virgili, 2016. http://hdl.handle.net/10803/399538.

Повний текст джерела
Анотація:
ASPEN-Plus se utilizó para llevar a cabo investigaciones en régimen estacionario sobre una máquina comercial de refrigeración de absorción de 3 toneladas (10 kW de capacidad de refrigeración) accionada con gas natural y un refrigerador de difusión-absorción (DAR) de pequeña potencia (7.5 W de capacidad de refrigeración).Antes de iniciar las simulaciones, se selecciona entre los nueve modelos implementados en la librería de ASPEN-Plus, el modelo adecuado para estimar las propiedades termodinámicas del fluido de trabajo amoníaco/agua en amplios rangos de temperatura (273,16 ≤ T ≤ 613,15 K) y de
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Castro, González Jesús. "Simulation of heat and mass transfer phenomena in the critical elements of H2O-LiBr absorption cooling machines. Experimental validation and application to design." Doctoral thesis, Universitat Politècnica de Catalunya, 2005. http://hdl.handle.net/10803/6692.

Повний текст джерела
Анотація:
Degut a la tendència a l'increment del preu de la energia, i el seu ús cada cop més estès per aire condicionat en els paisos desenvolupats, els sistemes de refrigeració basats en energia solar tenen cada cop més atractiu. El objectiu final d'aquesta tesi és el desenvolupament d'eines de simulació numèrica pel disseny de màquines de refrigeració per absorció que tinguin la possibilitat de funcionar amb energia solar. Malgrat existeixen en el mercat màquines d'absorció d'aquestes característiques des de fa anys, hi ha una deficiència en el desenvolupament de sistemes de petita capacitat. Els si
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Absorption machines"

1

P, Leight Steven, Dorgan Charles E, and American Society of Heating, Refrigerating and Air-Conditioning Engineers., eds. Application guide for absorption cooling/refrigeration using recovered heat. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 1995.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Technology Absorption and Adaptation Scheme (India), India. Dept. of Scientific & Industrial Research., and National Workshop on "Technology and Norms in Forged & Portable Tools Industry" (1989 : New Delhi, India), eds. Technology evaluation in forged and portable tools industry: A report prepared under Technology Absorption and Adaptation Scheme. Govt. of India, Dept. of Scientific and Industrial Research, Ministry of Science and Technology, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Velluet, P. Système frigorifique à absorption mécaniquement autonome utilisant l'énergie solaire: Machine expérimentale de petite puissance = Self operating absorption cooling system, using solar energy : Small power experimental plant. Commission of the European Communities, 1986.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

American Society of Heating, Refrigerating and Air-Conditioning Engineers. Absorption / sorption heat pumps and refrigerating systems: A collection of papers from the ASHRAE meetings at Atlanta, Georgia February 1996. American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jürgen, Wiemann, and Deutsches Institut für Entwicklungspolitik, eds. Technology absorption in the automotive and machine tool industry in South India with special reference to technology transfer from the Indian Institute of Technology, Madras. German Development Institute, 1987.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Great Britain. Health and Safety Executive. Health and Safety Laboratory., ed. Measurement of personal exposure of metalworking machine operators to airborne water-mix metalworking fluid: Elemental marker method using flame atomic absorption spectrometry or inductively coupled plasma-atomic emission spectrometry. Health and Safety Executive., 2003.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Voorhees, Gardner Tufts. Refrigerating Machines : Compression, Absorption: Comparison of Capacities and Economies of Compression and Absorption Systems, and of Combined ... and Diagrams of the Paper Entitled Compar. Franklin Classics Trade Press, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Voorhees, Gardner Tufts. Refrigerating Machines : Compression, Absorption: Comparison of Capacities and Economies of Compression and Absorption Systems, and of Combined Compression and Absorption Systems. Being the Complete Text, Figures, and Diagrams of the Paper Entitled Compar. Creative Media Partners, LLC, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Dincer, Ibrahim, and Tahir Abdul Hussain Ratlamwala. Integrated Absorption Refrigeration Systems: Comparative Energy and Exergy Analyses. Springer London, Limited, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Dincer, Ibrahim, and Tahir Abdul Hussain Ratlamwala. Integrated Absorption Refrigeration Systems: Comparative Energy and Exergy Analyses. Springer, 2016.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Absorption machines"

1

Shih, Ming-Hsiang, and Wen-Pei Sung. "Shock Absorption Effect of Semi-active Mass Control Mechanism for Structure." In Dynamics and Control of Advanced Structures and Machines. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-90884-7_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ali, M. H. "Plant: A Machinery of Water Absorption." In Fundamentals of Irrigation and On-farm Water Management: Volume 1. Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-6335-2_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Govindaraj, Mahalingam, Mahesh Pujar, and Venkatram Pravalika. "High Throughput Phenotyping for Grain Zinc: Sampling and Analytical Overview." In Breeding Zinc Crops for Better Human Health. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-84342-6_1.

Повний текст джерела
Анотація:
Abstract Creating biofortified cultivars with increased grain zinc (Zn) content in localized staple food crops is a viable way to help the most vulnerable members of society who suffer from Zn deficiency and its related health effects. This means that in order to produce and spread nutrient-dense cultivars, micronutrient analytical techniques with low-cost, repeatable, and high throughput methodologies are required. While colorimetry (also known as the staining technique) is a straightforward, inexpensive method used for initial rapid screening, inductively coupled plasma optical emission spec
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Do, KimHoang, DucHieuLe, DuyMinh Vo, HuuSon Le, PhucThien Nguyen, and Trong Nhan Tran. "Influence of Crash Box Structure on Energy Absorption Capacity." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-83357-1_42.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sudhanwa, M. Kulkarni, Vemu Priyal, D. Mali Kiran, and M. Kulkarni Dhananjay. "Energy Absorption Characteristics of Aluminium Alloy Tubes Subjected to Quasi-static Axial Load." In Mechanisms and Machine Science. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15758-5_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhao, Miaoyu, and Fang Yan. "Qualitative Detection of Melamine Based on Terahertz Spectrum and Analysis of Absorption Peak Study." In Mechanisms and Machine Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-26193-0_42.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ferre, A., M. Castilla, J. A. Carballo, and J. D. Álvarez. "Characterization of an Absorption Machine Using Artificial Neural Networks." In IFIP Advances in Information and Communication Technology. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34107-6_22.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Morosuk, Tatiana. "Structural and Parametric Optimization of an Absorption Refrigeration Machine: Inverse Rectification as Auxiliary Absorption Process." In Defect and Diffusion Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908451-36-1.219.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lippi, Marco, Andrea Passerini, Marco Punta, and Paolo Frasconi. "Metal Binding in Proteins: Machine Learning Complements X-Ray Absorption Spectroscopy." In Machine Learning and Knowledge Discovery in Databases. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33486-3_63.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Peixinho, N. "Geometry and Material Strategies for Improved Management of Crash Energy Absorption." In New Trends in Mechanism and Machine Science. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09411-3_27.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Absorption machines"

1

He, Fan, Zhiming Zhang, Zheng Ye, and Yun He. "Design of Electromagnetic Transmission/Absorption Structures Based on Machine Learning." In 2024 IEEE 7th International Conference on Electronic Information and Communication Technology (ICEICT). IEEE, 2024. http://dx.doi.org/10.1109/iceict61637.2024.10671128.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Sunori, Sandeep Kumar, Shilpa Jain, Amit Mittal, and Pradeep Juneja. "Estimation of THz Absorption Coefficient of Soil using Machine Learning." In 2024 3rd International Conference on Automation, Computing and Renewable Systems (ICACRS). IEEE, 2024. https://doi.org/10.1109/icacrs62842.2024.10841603.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Fang, Zheng, Jingxuan Xu, Shiliang Song, et al. "Identification method for prohibited drugs based on x-ray absorption spectroscopy and machine learning." In Seventeenth International Conference on Photonics and Imaging in Biology and Medicine (PIBM 2024), edited by Valery V. Tuchin, Qingming Luo, and Lihong V. Wang. SPIE, 2025. https://doi.org/10.1117/12.3056972.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Qian, Yigang, Yanlin Chen, Fan Sun, et al. "The research on the relationship between transmittance and thickness of synthetic quartz with ultra-low absorption." In International Conference on New Materials, Machinery, and Vehicle Engineering 2024, edited by Jinyang Xu and J. Paulo Davim. SPIE, 2024. http://dx.doi.org/10.1117/12.3055020.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bairamov, Shamil Z., Olga S. Malinina, and Aleksandr V. Baranenko. "Selection Criteria for a Lithium Bromide Absorption Refrigeration Machine in a Solar Energy Cooling System." In 2025 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). IEEE, 2025. https://doi.org/10.1109/icieam65163.2025.11028539.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Bougdid, Yahya, Zouheir Sekkat, Anouar Rahmouni, Imad Maouli, Kentaro Mochizuki, and Mohammed Halim. "Laser nanofabrication in photoresists by two-photon absorption." In Molecular Machines, edited by Zouheir Sekkat. SPIE, 2018. http://dx.doi.org/10.1117/12.2322373.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Qiu, Zhijie, Jin Zhang, Puqi Ning, and Xuhui Wen. "Study on Moisture Absorption Characteristics of Power Plastic Packaging Devices." In 2018 21st International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2018. http://dx.doi.org/10.23919/icems.2018.8549152.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Taratorin, A. A., and A. B. Mukhametov. "Acoustic and Aerodynamic Properties of the Petal-shaped Absorption Silencers." In 2022 International Conference on Dynamics and Vibroacoustics of Machines (DVM). IEEE, 2022. http://dx.doi.org/10.1109/dvm55487.2022.9930897.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sekkat, Zouheir, Siham Refki, and Sanaa Elhani. "Enhancement of molecular orientation by surface enhanced visible absorption of dye molecules in the vicinity of gold nano-antennas." In Molecular and Nano Machines IV, edited by Zouheir Sekkat and Takashige Omatsu. SPIE, 2021. http://dx.doi.org/10.1117/12.2595343.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Emas, Madison N., Austin Baylis, and Greg Stitt. "High-Frequency Absorption-FIFO Pipelining for Stratix 10 HyperFlex." In 2018 IEEE 26th Annual International Symposium on Field-Programmable Custom Computing Machines (FCCM). IEEE, 2018. http://dx.doi.org/10.1109/fccm.2018.00024.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Absorption machines"

1

Anheier, N. C. Jr, C. E. McDonald, J. M. Cuta, F. M. Cuta, and K. B. Olsen. Ammonia and ammonium hydroxide sensors for ammonia/water absorption machines: Literature review and data compilation. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/86305.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Taylor. L51578 Drop-Weight-Tear-Test Equipment Energy Calibration Program. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010096.

Повний текст джерела
Анотація:
The Drop-Weight-Tear-Test (DWTT) energy absorption has not previously been considered as a measure of fracture toughness from this test. The DWTT was originally planned to define the fracture appearance transition temperature of line pipe. The test has been very successfully used for this purpose for the past 20 years. During this period of DWTT usage, the need for a toughness measurement to control ductile fracture propagation has seen the application of a Charpy shelf-energy in addition to a DWTT or Charpy shear area requirement in the specification of line-pipe properties. The purpose of ex
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Paesler, M., and D. Sayers. Atomic structure of machined semiconducting chips: An x-ray absorption spectroscopy study. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/476642.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bourdeau, J. E., and R. D. Dyer. Regional-scale lake-sediment sampling and analytical protocols with examples from the Geological Survey of Canada. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331911.

Повний текст джерела
Анотація:
Regional-scale lake sediment surveys have been successfully used since the 1970s as a means for reconnaissance geochemical exploration. Lake sediment sampling is typically performed in areas with a lack of streams and an overabundance of small-sized (=5 km across) lakes. Lake sediments are known to have major, minor and trace element concentrations that reflect the local geology. Overall, lake sediment surveys are planned and conducted following four distinct stages: 1) background research, 2) orientation survey, 3) regional survey, and 4) detailed survey. At the Geological Survey of Canada, s
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!