Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Additive to bone allografts.

Дисертації з теми "Additive to bone allografts"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-43 дисертацій для дослідження на тему "Additive to bone allografts".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Campbell, David Graham. "Sterilization of HIV infected bone allografts /." Title page, contents and abstract only, 1996. http://web4.library.adelaide.edu.au/theses/09PH/09phc1869.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ivory, John Patrick. "The use of irradiation to sterilise bone allografts." Thesis, University of Leicester, 1997. http://hdl.handle.net/2381/29545.

Повний текст джерела
Анотація:
Large skeletal defects are often encountered in the surgery of bone tumours, revision arthroplasty and trauma. Skeletal stability can be restored using either large endoprostheses or structural allografts. The latter have the advantage of restoring bone in the defect. However, transplantation of allograft bone carries with it the risk of transmissal of contaminant or blood borne infection. Sterilisation of such grafts is commonly performed by the use of gamma irradiation. The first part of this study was the audit of an allograft bank to determine the incidence of contamination of the grafts a
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Balderson, Debra Susan. "The mechanical properties of skeletal allografts : preservation and decontamination effects." Thesis, University of York, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313855.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Brinkman, Jennifer G. "The Effect of Damage on the Long-Term Viability of Cortical Bone Allografts." Case Western Reserve University School of Graduate Studies / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1280808150.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wong, Wilson. "Tolerance to allografts using recipient bone marrow cells trandsduced with a donor MHC gene." Thesis, University of Oxford, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389040.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Duty, Angel Osborne. "Controlled In Vivo Mechanical Stimulation of Bone Repair Constructs." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5222.

Повний текст джерела
Анотація:
Bone grafts are used to treat more than 300,000 fracture patients yearly, as well as patients with congenital defects, bone tumors, and those undergoing spinal fusion. Given the established limitations of autograft and allograft bone, there is a substantial need for bone graft substitutes. Tissue engineering strategies employing the addition of osteogenic cells and/or osteoinductive factors to porous scaffolds represent a promising alternative to traditional bone grafts. While many bone defects are in load-bearing sites, very little is known about the response of bone grafts and their subst
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Eshraghi, Shaun. "Additive manufacture of tissue engineering scaffolds for bone and cartilage." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/54482.

Повний текст джерела
Анотація:
Bone and cartilage constructs are often plagued with mechanical failure, poor nutrient transport, poor tissue ingrowth, and necrosis of embedded cells. However, advances in computer aided design (CAD) and computational modeling enable the design of scaffolds with complex internal michroarchitectures and the a priori prediction of their transport and mechanical properties, such that the design of constructs satisfying the needs of the tissue environment can be optimized. The goal of this research is to investigate the capability of additive manufacturing technologies to create designed microarc
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Eloi, Rodrigo Dias. "Enxertos de dente particulado: a sua aplicabilidade clínica." Master's thesis, [s.n.], 2015. http://hdl.handle.net/10284/5288.

Повний текст джерела
Анотація:
Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária<br>O enxerto de dente particulado, mais propriamente da porção dentinária, compreende uma técnica recente na qual se utiliza esta matéria-prima autógena como enxerto ósseo. É uma técnica que pode ser aplicada pós-extração dentária com o intuito de diminuir ao máximo as perdas ósseas inerentes, elevações de seio maxilar, correção de defeitos ósseos e aumento do rebordo alveolar. Estas situações quando não devidamente tratadas podem d
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Billing, John Stephen. "Strategies for the induction of unresponsiveness to allografts using bone marrow as a vehicle for donor alloantigen delivery." Thesis, University of Oxford, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.393427.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

López, Martínez Juan José. "Aloinjertos óseos estructurales en tumores óseos de huesos largos. Experiencia del Hospital Universitario “Virgen de la Arrixaca”." Doctoral thesis, Universidad de Murcia, 2011. http://hdl.handle.net/10803/42935.

Повний текст джерела
Анотація:
Los aloinjertos óseos estructurales han supuesto una alternativa al tratamiento de los tumores óseos de miembros con posibilidad de cirugía de conservación del miembro. Presentamos un estudio retrospectivo observacional del manejo de los aloinjertos óseos estructurales en tumores óseos de huesos largos en nuestro hospital, durante los años 1993 a 2010, en el que obtenemos una muestra de 37 pacientes subsidiarios de esta técnica quirúrgica. Mediante la obtención de datos clínicos de la muestra aplicamos las escalas de funcionalidad de MANKIN y EVACOM HUVA con resultados excelentes, muy buenos o
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Danty, Paul. "Mise en forme par fabrication additive de céramique phosphocalcique mimant l'os humain." Electronic Thesis or Diss., Limoges, 2023. http://www.theses.fr/2023LIMO0052.

Повний текст джерела
Анотація:
L’hydroxyapatite (HA) est largement utilisée pour l’élaboration de substituts osseux. En effet, lorsque le défaut osseux est trop important, la réparation naturelle ne peut avoir lieu. L’HA, est alors un excellent candidat pour le comblement osseux grâce à sa composition chimique proche de celle de l’os. De plus, ses propriétés d’ostéoconduction permettent une colonisation efficace des cellules sur le substitut favorisant la formation d’os nouveau. Ce processus est accentué par la structure poreuse et interconnectée du substitut. La mise en forme des substituts architecturés est donc un challe
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Bakhtiari, Hamed. "Mechanical and low-cycle fatigue performance of polymeric bone scaffolds." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2025. https://ro.ecu.edu.au/theses/2901.

Повний текст джерела
Анотація:
Polylactic acid (PLA) has emerged as a promising material for bone scaffolds due to its biocompatibility, controlled degradation, and suitability for additive manufacturing. However, polymeric scaffolds often face challenges in achieving adequate mechanical strength which compromise their effectiveness as load-bearing supports during bone healing. Hence, evaluating and improving their fatigue performance is essential to meet the required strength. Existing studies have mainly focused on mechanical properties of polymeric scaffolds under static loading, while their performance under cyclic load
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Uth, Nicholas P. "Computational Design and Optimization of Bone Tissue Engineering Scaffold Topology." Miami University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=miami1452783077.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Poh, Su Ping Patrina. "In vitro and in vivo assessment of bioactive composite scaffolds fabricated via additive manufacturing technology." Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/75649/1/Su%20Ping%20Patrina_Poh_Thesis.pdf.

Повний текст джерела
Анотація:
Additive manufacturing (AM) technology was implemented together with new composite material comprising a synthetic materials, namely, polycaprolactone and bioactive glass with the ultimate aim of the production of an off-the-shelf composite bone scaffold product with superior bone regeneration capacity in a cost effective manner. Our studies indicated that the composite scaffolds have huge potential in promoting bone regeneration. It is our contention that owing to the fruits of such innovative efforts, the field of bone regeneration can metamorphose into a technology platform that allows clin
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Kleinfehn, Alex Patrick. "Scale-Up of Modifiable Poly(propylene fumarate) and Surface Functionalization of Additive Manufactured Scaffolds for Bone Tissue Regeneration." University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron1562679460809562.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Taniguchi, Naoya. "Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment." Kyoto University, 2016. http://hdl.handle.net/2433/215404.

Повний текст джерела
Анотація:
Subscription articles: Theses and dissertations which contain embedded PJAs as part of the formal submission can be posted publicly by the awarding institution with DOI links back to the formal publications on ScienceDirect.doi:10.1016/j.msec.2015.10.069<br>Kyoto University (京都大学)<br>0048<br>新制・課程博士<br>博士(医学)<br>甲第19578号<br>医博第4085号<br>新制||医||1013(附属図書館)<br>32614<br>京都大学大学院医学研究科医学専攻<br>(主査)教授 安達 泰治, 教授 開 祐司, 教授 妻木 範行<br>学位規則第4条第1項該当
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Cronskär, Marie. "The use of additive manufacturing in the custom design of orthopedic implants." Licentiate thesis, Mittuniversitetet, Institutionen för teknik och hållbar utveckling, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-14390.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
18

Ainsworth, Madison. "The development of strontium-substituted bioactive glass composite scaffolds for patient-specific bone repair." Thesis, Queensland University of Technology, 2020. https://eprints.qut.edu.au/203941/1/Madison_Ainsworth_Thesis.pdf.

Повний текст джерела
Анотація:
Large (critical-sized) bone defects present a regenerative challenge to the body. Scaffold-based tissue engineering techniques can potentially address the challenge through the convergence of patient-specific design and novel biomaterials. This project investigated the in vitro bone forming capacity of a bioactive composite biomaterial scaffold produced with a high-resolution 3D printing technique: melt electrowriting (MEW). The MEW fabricated composite material was found to enhance the differentiation of bone-forming cells.
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Adam, Jérémy. "Développement, modélisation et caractérisation d'une maille innovante réalisée en fabrication additive pour les grands défauts osseux." Thesis, Paris, ENSAM, 2017. http://www.theses.fr/2017ENAM0068/document.

Повний текст джерела
Анотація:
Ce travail de thèse traite du développement d’une maille en titane imprimée en 3D pour le comblement des grands défauts osseux. La perte de substance osseuse intervient lors de traumatismes importants ou de chirurgies ablatives (dues à des infections ou à des cancers). Lorsque le défaut atteint un stade critique, la régénération osseuse est impossible et on assiste à une perte de fonction. Il faut alors recourir à des chirurgies reconstructrices comme par exemple la reconstruction mandibulaire. Aujourd’hui, la chirurgie communément pratiquée pour reconstruire la mandibule est la reconstruction
Стилі APA, Harvard, Vancouver, ISO та ін.
20

Coffigniez, Marion. "Additive manufacturing of 3D architectured metallic biomaterials by robocasting." Thesis, Lyon, 2021. http://www.theses.fr/2021LYSEI007.

Повний текст джерела
Анотація:
Au-delà de l'aspect de personnalisation qu'elle peut apporter au domaine médical, la fabrication additive donne aussi accès à l'élaboration de structures cellulaires. Ces structures, de porosité maîtrisée, permettent à la fois de moduler les propriétés mécaniques de l'objet, mais aussi de favoriser l'invasion cellulaire nécessaire en ingénierie tissulaire. Parmi les métaux communément utilisés en chirurgie orthopédique, les alliages de titane sont ceux présentant la rigidité la moins éloignée de celle de l'os. Cette étude porte donc sur l'élaboration de structures en Ti6-Al-4V, mais aussi en m
Стилі APA, Harvard, Vancouver, ISO та ін.
21

Cestari, Francesca. "3D printing of bone scaffolds using powders derived from biogenic sources." Doctoral thesis, Università degli studi di Trento, 2023. https://hdl.handle.net/11572/363403.

Повний текст джерела
Анотація:
This doctoral work was developed in the frame of bone tissue engineering, dealing with the fabrication of scaffolds for the regeneration of bones. At this purpose, calcium phosphates derived from natural sources are very interesting because they are more similar to the bone mineral and possess better bioactivity. Indeed, the bone mineral is different from synthetic hydroxyapatite as it is non-stoichiometric, nanosized, it presents a high degree of disorder and contains many additional ions and impurities such as CO32-, Mg2+, Sr2+, Na+, etc. These characteristics can be easily obtained by synth
Стилі APA, Harvard, Vancouver, ISO та ін.
22

Biotteau, Florian. "Impression 3D de céramiques phosphocalciques dopées : applications en régénération tissulaire osseuse." Electronic Thesis or Diss., Université Clermont Auvergne (2021-...), 2024. http://www.theses.fr/2024UCFA0044.

Повний текст джерела
Анотація:
La fabrication additive est une méthode de mise en forme récente permettant d'obtenir des structures innovantes et une personnalisation des pièces. Ces deux aspects intéressent le domaine médical afin d'améliorer les propriétés d'ostéointégration des substituts osseux dans une réflexion axée autour d'une médecine personnalisée aux besoins des patients permettant une amélioration des conditions de vie. Dans ce contexte, les chirurgiens orthopédistes de l'équipe Matériaux Pour la Santé de l'Institut de Chimie de Clermont-Ferrand ont identifié les substituts osseux en céramique, et plus particuli
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Fonseca, Anna Carolina de Oliveira. "Obliteração de cavidades mastoideas com aloenxerto ósseo particulado congelado em cirurgias revisionais de otite média crônica colesteatomatosa." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/5/5143/tde-04082016-163722/.

Повний текст джерела
Анотація:
Objetivo: Avaliar o controle da supuração de cavidades mastoideas após cirurgia revisional e obliteração de mastoide com aloenxerto ósseo particulado congelado (AOPC). Desenho do estudo: Exploratório, prospectivo, tipo série de casos. Pacientes: Dez adultos selecionados entre pacientes já submetidos à cirurgia de mastoidectomia cavidade aberta ou fechada para tratamento de otite média crônica colesteatomatosa e que tinham indicação de cirurgia revisional. Intervenção: Revisão de mastoidectomia e obliteração da cavidade com AOPC, material de preenchimento de baixo custo obtido de um banco de te
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Muramoto, Yuta. "Study of drilling properties in bone biomodel." Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEC013.

Повний текст джерела
Анотація:
Le perçage d’os est une compétence chirurgicale fondamentale dans les spécialités telles que l’orthopédie, la dentisterie et la neurochirurgie. Face à la société vieillissante de notre époque, le nombre d'opérations chirurgicales devrait augmenter avec l'élargissement de la proportion de personnes âgées. Afin de répondre aux exigences de plus en plus fortes des soins médicaux, il est nécessaire de permettre une formation chirurgicale adaptée des médecins et le développement de dispositifs médicaux performants. Les biomodèles d’os sont indispensables pour la formation chirurgicale et les essais
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Ramin, Ettore. "Automated design of trabecular structures." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6378.

Повний текст джерела
Анотація:
Additive manufacturing technologies are enabling newfound degrees of geometrical complexity to be realised, particularly with regards to internal structures. All of these manufacturing technologies are dependant on their prior design in an appropriate electronic form, either by reverse engineering, or, primarily, by computer-aided design. Within these emerging applications is the design of scaffolds with an intricate and controlled internal structure for bone tissue engineering. There is a consensus that ideal bone scaffold geometry is evident in biological trabecular structures. In their most
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Forrestal, David Peter. "Flow control in perfusion bioreactors for improved cell culture within porous tissue scaffolds." Thesis, Queensland University of Technology, 2019. https://eprints.qut.edu.au/133365/2/David%20Peter%20Forrestal%20Thesis.pdf.

Повний текст джерела
Анотація:
This thesis presents the development of cell culture systems capable of generating large, anatomically-accurate biological tissue substitutes. These tissue substitutes can be used to study fundamental interactions of cells with materials and structures, asses the clinical potential of new prosthetic implants, and be developed further into therapeutic treatments consisting of medical implants integrated with live-cell cultures.
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Charbonnier, Baptiste. "Développement de procédés de mise en forme et de caractérisation pour l’élaboration de biocéramiques en apatites phosphocalciques carbonatées." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEM031/document.

Повний текст джерела
Анотація:
Les changements sociétaux tels que la personnalisation de la médecine, ainsi que la volonté de mieux comprendre la biologie de l’os modifie notre approche de fabrication des biomatériaux. Ces derniers se doivent ainsi d’être sur-mesure, c’est-à-dire capables de répondre à une problématique particulière. Ceci implique plus précisément dans le cas qui nous intéresse, à savoir l’os, la maîtrise de leur architecture et de leur comportement en milieu biologique (e.g., biodégradabilité).Malgré leurs atouts incontestables pour ce domaine, les biocéramiques en hydroxyapatite (HA) restent cantonnées à
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Contar, Cintia Mussi Milani. "Análise clínica e histológica do osso alógeno fresco congelado na reconstrução de rebordo alveolar maxilar = Maxillary ridge augmentation with fresh frozen bone allografts / Cintia Mussi Milani Contar ; orientadora, Maria Ângela Naval Machado ; co-orientador, Jayme Bordini Júnior." reponame:Biblioteca Digital de Teses e Dissertações da PUC_PR, 2008. http://www.biblioteca.pucpr.br/tede/tde_busca/arquivo.php?codArquivo=1254.

Повний текст джерела
Анотація:
Tese (doutorado) - Pontifícia Universidade Católica do Paraná, Curitiba, 2008<br>Inclui bibliografias<br>Análise Clínica e Histológica do Osso Alógeno Fresco Congelado na reconstrução de Rebordo Alveolar Maxilar O enxerto ósseo alógeno surge como uma alternativa ao enxerto autógeno, apresentando como principais vantagens a diminuição do trauma operatório e o<br>Bone resorption in the maxillary ridge frequently results in a knife-edged deformity, wich complicates implant placement and stabilization. reconstruction of the severely atrophic maxilla is still a major challenge for oral and maxill
Стилі APA, Harvard, Vancouver, ISO та ін.
29

Marques, Ana Catarina Fernandes. "Design and processing of porous scaffolds based on calcium phosphates by robocasting for bone tissue engineering." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/22471.

Повний текст джерела
Анотація:
Doutoramento em Ciência e Engenharia de Materiais<br>A presente dissertação teve como foco principal o desenvolvimento de estruturas 3D porosas (scaffolds) para regeneração óssea por robocasting. Esta técnica de fabrico aditivo permite a produção de scaffolds com morfologia e estrutura predefinidas e sem a necessidade de maquinagem subsequente, podendo ser usada para o fabrico de implantes personalizados com estrutura interna semelhante à do osso que se pretende substituir. Como materiais de partida, foram utilizados pós de fosfatos de cálcio bifásicos (hidroxiapatite + β-fosfato tricál
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Gariboldi, Maria Isabella. "Effect of calcium phosphate ceramic architectural features on the self-assembly of microvessels in vitro." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/283005.

Повний текст джерела
Анотація:
One of the greatest obstacles to clinical translation of bone tissue engineering is the inability to effectively and efficiently vascularise scaffolds. This limits the size of defects that can be repaired, as blood perfusion is necessary to provide nutrient and waste exchange to tissue at the core of scaffolds. The goal of this work was to systematically explore whether architecture, at a scale of hundreds of microns, can be used to direct the growth of microvessels into the core of scaffolds. A pipeline was developed for the production of hydroxyapatite surfaces with controlled architecture.
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Cardoso, Luiz de Camargo 1958. "Dispositivo customizado produzido por manufatura aditiva para reabilitação oral em pacientes com regiões de atrofia óssea em áreas desdentadas extensas : Custom device produced by additive manufacturing for oral rehabilitation in patients with bone atrophy in regions of large edentulous areas." [s.n.], 2014. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265923.

Повний текст джерела
Анотація:
Orientador: Cecília Amélia de Carvalho Zavaglia<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica<br>Made available in DSpace on 2018-08-24T20:04:45Z (GMT). No. of bitstreams: 1 Cardoso_LuizdeCamargo_M.pdf: 3937721 bytes, checksum: 35ed94c8bb9f043e9e463bd489f44ae5 (MD5) Previous issue date: 2014<br>Resumo: A necessidade de reabilitação oral gera o desenvolvimento de inúmeras pesquisas com o intuito de inovações nesta área. O aumento da expectativa de vida, a busca pelo conforto e saúde são fatores primordiais para os aprimoramentos dos novos disp
Стилі APA, Harvard, Vancouver, ISO та ін.
32

"The biology of bone allografts." 1998. http://library.cuhk.edu.hk/record=b6073105.

Повний текст джерела
Анотація:
Shekhar Madhuker Kumta.<br>Thesis (Ph.D.)--Chinese University of Hong Kong, 1998.<br>Includes bibliographical references (p. 175-190).<br>Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web.<br>Mode of access: World Wide Web.
Стилі APA, Harvard, Vancouver, ISO та ін.
33

Rezai, Nana. "Bone marrow-derived host cells in murine cardiac allografts." Thesis, 2006. http://hdl.handle.net/2429/18629.

Повний текст джерела
Анотація:
Despite the success of current immunosuppressive agents in controlling acute rejection in the field of transplantation, chronic rejection continues to limit survival and quality of life in heart transplant recipients. Transplant vascular disease (TVD) is a rapidly progressive form of atherosclerosis that occurs in the vessels of solid organ transplants. The pathogenesis of TVD has a multifactorial basis arising from a complicated interplay between immunological and non-immunological factors. Together, these factors result in endothelial cell (EC) damage and accumulation of modified smooth musc
Стилі APA, Harvard, Vancouver, ISO та ін.
34

Campbell, David Graham 1962. "Sterilization of HIV infected bone allografts / David Graham Campbell." 1996. http://hdl.handle.net/2440/19245.

Повний текст джерела
Анотація:
Bibliography: leaves 151-206.<br>xxvi, 206 leaves, [8] plates : ill. (chiefly col.) ; 30 cm.<br>Title page, contents and abstract only. The complete thesis in print form is available from the University Library.<br>Examines the hypothesis that HIV infected bone allografts can be sterilized with 25 kGy of gamma irradiation.<br>Thesis (Ph.D.)--University of Adelaide, Dept. of Orthopaedic Surgery & Trauma, 1998?
Стилі APA, Harvard, Vancouver, ISO та ін.
35

Leal, Filipa Andreia Martins. "Development of Customized 3D Structures for Bone Regeneration by Additive Manufacturing." Master's thesis, 2019. https://hdl.handle.net/10216/122156.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
36

Vlasea, Mihaela. "Additive Manufacturing Methodology and System for Fabrication of Porous Structures with Functionally Graded Properties." Thesis, 2014. http://hdl.handle.net/10012/8284.

Повний текст джерела
Анотація:
The focus of this dissertation is on the development of an additive manufacturing system and methodology for fabricating structures with functionally graded porous internal properties and complex three-dimensional external characteristics. For this purpose, a multi-scale three-dimensional printing system was developed, with capabilities and fabrication methodologies refined in the context of, but not limited to, manufacturing of porous bone substitutes. Porous bone implants are functionally graded structures, where internally, the design requires a gradient in porosity and mechanical propertie
Стилі APA, Harvard, Vancouver, ISO та ін.
37

Chen, Sheng-Yu, and 陳勝育. "Microstructure and mechanical properties of porous Ti-6Al-4V alloys for bone implants fabricated by additive manufacturing." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/v669qy.

Повний текст джерела
Анотація:
博士<br>國立中山大學<br>材料與光電科學學系研究所<br>106<br>In recent years, additive manufacture (AM), or called as rapid prototyping or 3D printing, has become a flourishing industry suitable to fabricate bio-implants, due to the benefits such as the reduction in process steps, complexity of parts, and customization. Among of them, the application of human bone has been most widely studied. However, the bone is a porous structure, subjected to wide variations as a result of human movement and inevitable changes with age, sex, and location. Therefore, it is important to study the relationship between the porous s
Стилі APA, Harvard, Vancouver, ISO та ін.
38

Tavares, Francisco. "3D printed magnetic scaffolds for bone cancer theranostics and regeneration." Master's thesis, 2022. http://hdl.handle.net/10362/134137.

Повний текст джерела
Анотація:
Atualmente, o cancro é a segunda maior causa de morte a nível mundial e, de acordo com a Organização Mundial da Saúde, a sua incidência e mortalidade tenderá a subir nas próximas décadas. Relativamente ao cancro ósseo, os tratamentos convencionais são a resseção tumoral por via cirúrgica, quimioterapia e radioterapia. Porém, a resseção pode resultar na criação de defeitos ósseos de tamanho crítico e, os dois últimos, revelam-se ineficientes para aplicações localizadas e provocam efeitos secundários indesejados. Teragnóstico do cancro é uma abordagem que visa a criação de um sistema com capaci
Стилі APA, Harvard, Vancouver, ISO та ін.
39

Pereira, Eugénio Miguel de Melo Azemel Zeferino. "Avaliação da reabsorção de enxertos de blocos onlay de crista de ilíaco homógeno nas reconstruções de maxilas atróficas." Doctoral thesis, 2015. http://hdl.handle.net/10316/26510.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
40

Chien, Shih-Hsun, and 簡士勛. "An Optimization Method for Additive-Manufactured Implants and the Prediction of Peri-implant Osseointegration by Using Bone Density Distribution and Cell Differentiation." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/2eda5d.

Повний текст джерела
Анотація:
碩士<br>國立交通大學<br>材料科學與工程學系所<br>106<br>The geometry of healing chamber in implants affects the biological healing pattern. In the current study, a method to optimize the shape of healing chamber in additive-manufactured implants for better osseointegration is proposed. It adopts the modified bone remodeling algorithm and is implemented by finite element software ANSYS. The concept is that the disused bone elements located in the healing chambers, which are expected to be less likely to survive, will be replaced by implant elements. Similarly, the implant elements adjacent to the bone elements wh
Стилі APA, Harvard, Vancouver, ISO та ін.
41

Wardhani, Primasari Cahya, and 蔡光妮. "A Computational Study of Different Additive Manufacturing Based-Total Ankle Replacement Devices Using Three- Dimensional Human Lower Extremity Bone Model with Various Ankle Postures." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/sn3s68.

Повний текст джерела
Анотація:
碩士<br>國立臺灣科技大學<br>應用科技研究所<br>106<br>TTAR (Total Ankle Replacement) is the best method to treat ankle arthritis. However, the clinical problems are still being an enigma. Many aspects of TAR device investigated in various studies, including the structures, materials, and manufacturing techniques to improve the biomechanical performance of the TAR. The AM (additive manufacturing) techniques have been investigated on the fabrication of implants. However, this technique is still rarely studied for ankle joint replacement. Therefore, the purpose of this study was to investigate the effect of variou
Стилі APA, Harvard, Vancouver, ISO та ін.
42

Αθανασίου, Βασίλειος. "Πειραματική συγκριτική μελέτη αναγγείων μοσχευμάτων για την πλήρωση οστικών ελλειμάτων". Thesis, 2001. http://nemertes.lis.upatras.gr/jspui/handle/10889/2776.

Повний текст джерела
Анотація:
Σκοπός αυτής της πειραματικής μελέτης είναι ο έλεγχος βιολογικής συμπεριφοράς διαφόρων τύπων μοσχευμάτων που σήμερα χρησιμοποιούνται ευρέως ως υποκατάστατα οστοών. Υλικό–Μέθοδος: Στην παρούσα μελέτη χρησιμοποιήθηκαν 90 κουνέλια Νέας Ζηλανδίας, ηλικία 3.5 μηνών και βάρους 4(0.25)kg, τα οποία χωρίσθηκαν σε 6 ομάδες, η κάθε μία εκ των οποίων περιελάμβανε 15 κουνέλια. Υπό γενική αναισθησία, με ενδομυϊκή χορήγηση κεταμίνης 35mg/kg και ξυλαζίνης 5mg/kg, δημιουργήθηκε, με πλάγια χειρουργική προσπέλαση, μια οπή με φρέζα διαμέτρου 4.5mm και βάθους 8mm, στους μηριαίους κονδύλους των 2 οπισθίων ά
Стилі APA, Harvard, Vancouver, ISO та ін.
43

Shanjani, Yaser. "Solid Freeform Fabrication of Porous Calcium Polyphosphate Structures for Use in Orthopaedics." Thesis, 2011. http://hdl.handle.net/10012/6240.

Повний текст джерела
Анотація:
The focus of this dissertation is on the development of a solid freeform fabrication (SFF) process for the design and manufacture of porous biodegradable orthopaedic implants from calcium polyphosphate (CPP). Porous CPP structures are used as bone substitutes for regenerating bone defects and/or as substrates in formation of so-called “biphasic” implants for repair of damaged osteochondral tissues. The CPP implants can be utilized in the treatment of many musculoskeletal diseases, osteochondral defects, and bone tumours while replacement of the defect site is required. In this study, the fabr
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!