Готові списки джерел за темами / Al-6061-T

Зміст

Статті в журналах
Тези доповідей конференцій

Добірка наукової літератури з теми "Al-6061-T"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Al-6061-T".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Al-6061-T"

Goel, M. D., N. S. Choudhary, and Sandeep Panchal. "Comparative Analysis of Aluminum Alloy 6061-T6 and Mild Steel Tubes in Sacrificial Protection System under Blast Loading." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (2022): 1299–304. http://dx.doi.org/10.38208/acp.v1.654.

Повний текст джерела

Анотація:

A sacrificial cladding consist of hollow metal tubes and steel sheet, is proposed in this study to protect a square concrete panel subjected to blast loading. Herein, comparative analysis of aluminum alloy 6061-T6 (Al 6061-T6) and mild steel tubes in sacrificial cladding is done using 3-D non-linear Finite Element (FE) software ABAQUS/Explicit®. Blast load is applied through ConWep program developed by US Army. Simplified Concrete Damage Plasticity (SCDP) model is used to define the material behavior of concrete slabs of thickness 250 mm. Johnson-Cook (J-C) plasticity model is used to model th

Стилі APA, Harvard, Vancouver, ISO та ін.

Nayak, J., and K. R. Hebbar. "Corrosion inhibition of T-6 treated 6061 Al-SiC(p) composite in hydrochloric acid." Transactions of the Indian Institute of Metals 61, no. 2-3 (2008): 221–24. http://dx.doi.org/10.1007/s12666-008-0006-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zheng, M., J. Hu, H. P. Teng, and Y. Zhao. "On the evaluation of plastic buckling of pipeline bending." International Review of Applied Sciences and Engineering 8, no. 1 (2017): 25–35. http://dx.doi.org/10.1556/1848.2017.8.1.5.

Повний текст джерела

Анотація:

In the present paper, various formulae for evaluating critical buckling strain of bending pipeline are analyzed on basis of its actual nature, available test data or finite element calculation results. The available test data is from different resources, it provides a more objective comparison; Especially, the experimental bending buckling data of Corona et al. and Kyriakides et al. for Al-6061-T6 aluminum pipes with various D/t value, as well as the prediction of Minnaar’s FEM regressive formula for high grade steel pipe are reanalyzed to check the reasonability of the plastically elliptical

Стилі APA, Harvard, Vancouver, ISO та ін.

Santana, Carlos, Luis Reyes-Osorio, Jesus Orona-Hinojos, Lizbeth Huerta, Alfredo Rios, and Patricia Zambrano-Robledo. "Numerical Study of Reinforced Aluminum Composites for Steering Knuckles in Last-Mile Electric Vehicles." World Electric Vehicle Journal 15, no. 3 (2024): 109. http://dx.doi.org/10.3390/wevj15030109.

Повний текст джерела

Анотація:

The steering knuckle is a critical component of the suspension and steering drive systems of electric vehicles. The electrification of last-mile vehicles presents a challenge in terms of cost, driving range and compensation of battery weight. This work presents a numerical methodology to evaluate 60XX series aluminum metal matrix composites (AMMCs) with reinforcement ceramic particles for steering knuckle components in medium heavy-duty last-mile cargo vehicles. The use of AMMCs provides lightweight knuckles with sufficient strength, stiffness and safety conditions for electrical vehicle cargo

Стилі APA, Harvard, Vancouver, ISO та ін.

El-Axir, M. H., M. M. Elkhabeery, and M. M. Okasha. "Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process." Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process 7, no. 5 (2017): 2047–55. https://doi.org/10.5281/zenodo.1037236.

Повний текст джерела

Анотація:

The influence of some turning variables and tool overhang on surface roughness parameters and residual stress induced due to machining 6061-T6 aluminum alloy is investigated in this paper. Four input parameters (cutting speed, feed rate, depth of cut and tool overhang) are considered. Tests are carried out by precision turning operation on a lathe. Design of experiment techniques, i.e. response surface methodology (RSM) and Taguchi's technique have been used to accomplish the objective of the experimental study. Surface roughness parameters are measured using a portable surface roughness devic

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Heng, He Yang, Yu Li Tian, and Kai Peng Shi. "Experimental Study on Bendability of Thin-Walled 6061-T4 Tube under Different Bending Velocities." Applied Mechanics and Materials 184-185 (June 2012): 196–200. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.196.

Повний текст джерела

Анотація:

The larger bending velocity is needed in practice to improve efficiency of tube bending, however, whether it has undesired effects on bending behavior has not been identified and clarified. In this study, taking thin-walled 6061-T4 Al-alloy tube of Φ50.8×0.889×101.6mm (out diameter D×wall thickness t×bending radius R) as the objective, the physical experiments are carried out to explore the influence rules of the bending velocity on tube bending in terms of major defects such as wall thinning, wrinkling and springback. The results show that: 1) both higher and lower bending velocities result i

Стилі APA, Harvard, Vancouver, ISO та ін.

ŁUKASZEWICZ, Andrzej, Jerzy JÓZWIK, and Kamil CYBUL. "IMPACT OF FRICTION COEFFICIENT VARIATION ON TEMPERATURE FIELD IN ROTARY FRICTION WELDING OF METALS – FEM STUDY." Applied Computer Science 19, no. 3 (2023): 17–27. http://dx.doi.org/10.35784/acs-2023-22.

Повний текст джерела

Анотація:

A mathematical model is presented for investigating the temperature field caused by the rotary friction welding of dissimilar metals. For this purpose, an axisymmetric, nonlinear, boundary value problem of heat conduction is formulated with allowance for the frictional heating of two cylindrical specimens of finite length made of Al 6061 aluminium alloy and 304 stainless steel. The thermo-physical properties of materials change with increasing temperature. It was assumed that the coefficient of friction does not depend on the temperature. The mechanism of heat generation due to friction on the

Стилі APA, Harvard, Vancouver, ISO та ін.

Prabowo, Aditya Rio, Toeri Fathuddin Yusuf, Prayoga Wira Adie, et al. "Engineered novel-mechanical design and performance assessment of stiffened plates against ballistic loading." Structural Integrity and Life 25, no. 1 (2025): 89–98. https://doi.org/10.69644/ivk-2025-01-0089.

Повний текст джерела

Анотація:

This study shows a numerical analysis of the ballistic characteristic of a bullet on a targeted stiffened plate. The numerical analysis compares the structural strength of the target plate with stiffener variations of I, L, T, Y, and X types with various material variations of Al 6061-T651, Al 6082-T6, Weldox 460E, and Armox 500T. Numerical simulations are performed at a squared stiffened target plate at projectile impact velocity of 341-863 m/s using ABAQUS/ Explicit® with the Johnson-Cook material model. The initial validation is successfully achieved by comparing the residual velocity value

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Lu, Xuefeng Wang, Shaowei Lu, Xinhua Liu, Binbin Zhang, and Xiaoqiang Wang. "Monitoring the damage evolution of Al 6061-T6 laser welded T-joint structure using nano-carbon tube based buckypaper film sensor." Diamond and Related Materials 146 (June 2024): 111217. http://dx.doi.org/10.1016/j.diamond.2024.111217.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Anand Babu, K., and P. Venkataramaiah. "Multi-response Optimization in Wire Electrical Discharge Machining (WEDM) of Al6061/SiCp Composite Using Hybrid Approach." Journal for Manufacturing Science and Production 15, no. 4 (2015): 327–38. http://dx.doi.org/10.1515/jmsp-2015-0010.

Повний текст джерела

Анотація:

AbstractIn recent days, the silicon carbide particulate reinforced aluminium metal matrix composites are most promising material in various engineering applications due to their strength to weight ratio, wear resistance and thermal resistance over the non-reinforced alloys. However, these materials are very difficult to cut by conventional machining methods due to the presence of silicon carbide particles. To overcome this limitation, the wire electrical discharge machining (WEDM) is employed to machine these composites. The aim of this study is to optimize the process parameters in wire elect

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Тези доповідей конференцій з теми "Al-6061-T"

Oliveira de Menezes, João Teixeira, Federico Matias de la Vega, Enrique Mariano Castrodeza, Matteo Zanon, Tom Pelletiers, and Riccardo Casati. "Effect Of Loading Direction On Tensile And Fracture Behavior Of 6061 Al Alloy Produced By Binder Jetting." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235765587.

Повний текст джерела

Анотація:

Binder Jetting of Al alloys can open new scenarios for the additive manufacturing of many alloys that cannot be processed by laser-based printing technologies because of the susceptibility to hot cracking (e.g., 2xxx, 6xxx and 7xxx series alloys). In this study, 6061 Al alloy samples were produced by Binder Jetting. The debinding and sintering parameters were fine-tuned and the tensile and fracture properties of the samples were assessed. Compact tension C(T) fracture specimens were notched in three different crack-plane orientations. Microstructural and fractographic analyses were performed u

Стилі APA, Harvard, Vancouver, ISO та ін.

McRae, Jametta, Ajit Kelkar, Christopher Grace, William Craft, and Tony Giamei. "Impact Damage Resistance of Aluminum Alloy Foams." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0888.

Повний текст джерела

Анотація:

Abstract While some polymers are engineered to improve strength and endurance under elevated temperatures, these same materials are costly both economically and environmentally with the latter of the two stimulating the interest for this study. Polymers, more specifically foam cells are generally flame retardant. When ignited, toxins such as fluorine, bromine and other metallic salts are given off in the air. This poses potential environmental hazards. However, metallic materials (Aluminum) with their high strength, stiffness and ductility are much more environmentally friendly. Even if alloye

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!