Увійти

Готові списки джерел за темами / Algorithm of technological process / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Algorithm of technological process.

Статті в журналах з теми "Algorithm of technological process"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Algorithm of technological process".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Velikiy, S. I., M. M. Gorokhov, and V. A. Tenenev. "Stochastic Production Process Planning." Intellekt. Sist. Proizv. 23, no. 1 (2025): 54–64. https://doi.org/10.22213/2410-9304-2025-1-54-64.

Повний текст джерела

Анотація:

Uncertainty is an unavoidable element in many practical production planning and scheduling environments. The problem is formulated as follows. There are many tasks. The task is understood as any type of work within the technological process. Many machines must be used to complete a particular task. The execution of each task on a machine is characterized by indefinite time. In accordance with the technological process, a technological route representing a sequence of machines is prescribed for each or for some works. For practical use, methods using genetic algorithms are used to support plann

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Kordyukov, A. V., M. I. Savchenkov, and A. A. Chernova. "Adaptation of a CAD System for Technological Process Formation for Part Manufacturing in Small-Series and Single Production." Vestnik IzhGTU imeni M.T. Kalashnikova 26, no. 3 (2023): 26–32. http://dx.doi.org/10.22213/2413-1172-2023-3-26-32.

Повний текст джерела

Анотація:

The task of automating the system of technological preparation of production, including the stage of technological process design, is currently gaining special relevance. Implementation of re-engineering programs within the framework of solving the problems of ensuring technological independence and safety implies rapid deployment of production capacities and effective development of new production facilities. As a consequence, reliable and correct for application in various forms of production enterprises automation systems are required. The existing systems of automated design of technologic

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Tymchuk, C., P. Kundenko, L. Vakhonina, and V. Mardziavko. "ORGANIZATION AND MANAGEMENT OF THE TECHNOLOGICAL PROCESS OF THE ELEVATOR FOR IMPROVEMENT OF QUALITY GRAIN INDICATORS." Ukrainian Black Sea region agrarian science 112, no. 4 (2021): 100–109. http://dx.doi.org/10.31521/2313-092x/2021-4(112)-10.

Повний текст джерела

Анотація:

The article analyzes the system of automated process control at the elevator to determine promising areas for improving the quality of grain. The structural scheme of control and the algorithm of laying the transport route of grain according to the specified coordinates on the basis of SCADA-system are investigated. One of the directions of increase and improvement of technological process on the elevator is defined, which consists in improvement of control algorithms in the direction of optimization of technological processes of the elevator on many criteria (minimum of energy consumption, mi

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Qayumov, Aziz Norbek o'g'li. "INTELLECTUAL SYSTEMS IN TECHNOLOGICAL PROCESS MANAGEMENT." EURASIAN JOURNAL OF ACADEMIC RESEARCH 1, no. 3 (2021): 393–96. https://doi.org/10.5281/zenodo.4974331.

Повний текст джерела

Анотація:

This article discusses intelligent systems in the management of technological processes. In recent years, intelligent systems have been widely introduced in the management of technological processes, and expert systems have taken on the role of auxiliary to the main executor.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Belousova, Anna I., and Lyudmila V. Donchenko. "Automation of technological process of obtaining pectin." E3S Web of Conferences 126 (2019): 00062. http://dx.doi.org/10.1051/e3sconf/201912600062.

Повний текст джерела

Анотація:

The article discusses the feasibility of automation of the process of obtaining liquid pectin for the production of functional beverages to ensure the desired quality and physiological properties. There were presented comparative differences between traditional operator panels and workstations. There was substantiated the expediency of control and regulation of main technological parameters of the process of extraction of pectin substances. There was described the algorithm of evaluating the results of real–time monitoring of the process.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Safarova, A. A. "Solution of the Problem of Optimizing the Reactor Block of a Catalytic Cracking Unit." Herald of Azerbaijan Engineering Academy 15, no. 2 (2023): 84–88. https://doi.org/10.52171/2076-0515_2023_15_02_84_88.

Повний текст джерела

Анотація:

Effective control of technological systems of complex structure depends on the correctconstruction of optimal control algorithms based on mathematical models of various classes oftechnological processes. In process control systems, optimal control or optimization problems aresolved depending on the type of technological processes under consideration in order to ensurethe selected optimality criteria. In the presented paper, an algorithm for solving an optimizationproblem based on a mathematical model of the reactor block of a catalytic cracking unit has beendeveloped. This algorithm ensures th

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Fominykh, Dmitry, Vadim Kushnikov, and Alexander Rezchikov. "Prevention unstable conditions in the welding process via robotic technological complexes." MATEC Web of Conferences 224 (2018): 01045. http://dx.doi.org/10.1051/matecconf/201822401045.

Повний текст джерела

Анотація:

The article presents the statement of the problem, models and algorithms for controlling the welding process via robotic technological complexes in conditions of the risk of unstable states. The system dynamics model was used to describe the technological process. As system levels the basic indicators influencing quality of the made production chosen on the basis of experience of operation of the robotic technological complexes are taken. Functional dependences between indicators and their dependences on external factors are determined by approximation of statistical data. The procedure of ide

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Rakhmanov, Sherkul, Rano Gaziyeva, Dilbaroy Abdullaeva, and Nigora Azizova. "Development of an algorithm for optimization of continuous technological process of cultivation of microorganisms." E3S Web of Conferences 264 (2021): 04032. http://dx.doi.org/10.1051/e3sconf/202126404032.

Повний текст джерела

Анотація:

When implementing the tasks of controlling technological processes, finding the optimal control actions, and creating control algorithms that implement the optimal modes of technological processes, it is necessary to present the criterion of optimality in the form of a goal function, the extremum of which best meets the purpose of this object and expressed as - Relevant technical and economic indicators. The criterion of optimality should be an integral indicator that reflects the main aspects of production. Profit is most often taken as such a criterion for typical microbiological industries

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Chang, Zhi Yong, Jian Xin Yang, Neng Wan, and Jie Zhao. "Research on the Algorithm of Technological Dimension Chain Based on 3D Process Models." Applied Mechanics and Materials 58-60 (June 2011): 1421–28. http://dx.doi.org/10.4028/www.scientific.net/amm.58-60.1421.

Повний текст джерела

Анотація:

Aiming at the wide application of technological design in three-dimensional CAD software, while the technological dimension chain’s calculation is completed in the two-dimensional process sketch still. A sort of method of calculating technological dimension chain was put forward, which is based on three-dimensional process model. Three-dimensional process model is created through the process of technological design by introducing the concept of three-dimensional process model, and then, the information of process dimension is extracted from the three-dimensional process model and a tree orient

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Judek, Jan René. "Willingness to Use Algorithms Varies with Social Information on Weak vs. Strong Adoption: An Experimental Study on Algorithm Aversion." FinTech 3, no. 1 (2024): 55–65. http://dx.doi.org/10.3390/fintech3010004.

Повний текст джерела

Анотація:

The process of decision-making is increasingly supported by algorithms in a wide variety of contexts. However, the phenomenon of algorithm aversion conflicts with the development of the technological potential that algorithms bring with them. Economic agents tend to base their decisions on those of other economic agents. Therefore, this experimental approach examines the willingness to use an algorithm when making stock price forecasts when information about the prior adoption of an algorithm is provided. It is found that decision makers are more likely to use an algorithm if the majority of p

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Ramanda, Dika, Achmad Fauzi, and Victor Maruli Pakpahan. "Super Encryption of Rabin Cryptosystem Algorithm and Paillier Cryptosystem Algorithm on Digital Image Security Process." Journal of Artificial Intelligence and Engineering Applications (JAIEA) 4, no. 1 (2024): 467–78. http://dx.doi.org/10.59934/jaiea.v4i1.659.

Повний текст джерела

Анотація:

Technological advances have given rise to the need for data protection, especially digital images, which are vulnerable to misuse. This research proposes a super encryption method that combines two cryptographic algorithms, namely Rabin Cryptosystem and Paillier Cryptosystem, to increase digital image security. Rabin's algorithm does not have homomorphism, so it is vulnerable to factorization attacks if the prime numbers used are too small. Meanwhile, the Paillier algorithm has homomorphism properties which allow arithmetic operations to be carried out directly on the ciphertext without decryp

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Wang, Kaiming, Wei Liu, Yuxiang Hong, et al. "An Overview of Technological Parameter Optimization in the Case of Laser Cladding." Coatings 13, no. 3 (2023): 496. http://dx.doi.org/10.3390/coatings13030496.

Повний текст джерела

Анотація:

This review examines the methods used to optimize the process parameters of laser cladding, including traditional optimization algorithms such as single-factor, regression analysis, response surface, and Taguchi, as well as intelligent system optimization algorithms such as neural network models, genetic algorithms, support vector machines, the new non-dominance ranking genetic algorithm II, and particle swarm algorithms. The advantages and disadvantages of various laser cladding process optimization methods are analyzed and summarized. Finally, the development trend of optimization methods in

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Antipina, Evgeniya V., Svetlana A. Mustafina, Andrey F. Antipin, and Nikolay D. Morozkin. "Algorithm for Solving the Problem of Optimal Control of a Chemical-Technological Process with Terminal Constraints." Engineering Technologies and Systems 32, no. 3 (2022): 410–22. http://dx.doi.org/10.15507/2658-4123.032.202203.410-422.

Повний текст джерела

Анотація:

Introduction. The problem of determining the optimal mode parameters during the mathematical modeling of chemical and technological processes is the most important. Numerical methods and algorithms for the solution provide the basis for developing software packages to calculate processes and their digital twins. The mathematical model of the chemical-technological process can be described by a system of differential equations, highlighting the phase variables that determine the state of the process, and the control parameters, which can be changed and thereby affect the course of the process.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Antipin, A. F., E. V. Antipina, and S. A. Mustafina. "Modifi ed Fuzzy Controller with Optimization of Mode Parameters of Technological Process." Mekhatronika, Avtomatizatsiya, Upravlenie 25, no. 7 (2024): 354–61. http://dx.doi.org/10.17587/mau.25.354-361.

Повний текст джерела

Анотація:

The author’s modification of a multidimensional fuzzy controller with a block for optimizing mode parameters and a block for predicting terms is considered. A block diagram of the controller, fuzzification and defuzzification schemes for continuous quantities are presented. The mechanism of operation of the logical inference block, which forms the identification number of the general composite production rule from the serial numbers of the terms of input and output variables with feedback, is described. The identification number is used as a key to retrieve information from the database about

Стилі APA, Harvard, Vancouver, ISO та ін.

15

STUPNYTSKYY, VADYM. "FEATURE-ORIENTED PROCESS OPTIMIZATIONS." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 2 (November 22, 2022): 25–39. http://dx.doi.org/10.20998/2079-004x.2021.2(4).04.

Повний текст джерела

Анотація:

The example of structural and parametric optimization of the functionally-oriented technological processmachining of mold’s parts is described in the article. The most essential criteria of optimization arewearproofness, fatigue strength, contact stiffness and corrosion resistance of production. In the articlethe brought methodology over of researches and algorithm of optimization.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Deaconescu, Andrea, and Tudor Deaconescu. "Plane surface lapping technological processor." MATEC Web of Conferences 343 (2021): 02002. http://dx.doi.org/10.1051/matecconf/202134302002.

Повний текст джерела

Анотація:

To date lapping as a finishing process of part surfaces lacks an underlying digital knowledge base. This is due to the complex interlinking of the numerous parameters that influence the results of machining. Starting from here the paper argues improved process planning and machining process optimization by presenting a new modelling algorithm of lapping and a software tool designed as a support for lapping machine operators. The proposed computer programme enables automated planning of machining and can be deployed for studies related to the influence of various work parameters on the quality

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Samigulin, Timur, and Olga Shiryayeva. "Development of a SMART-system for a Complex Industrial Object Control based on Metaheuristic Algorithms of Swarm Intelligence." WSEAS TRANSACTIONS ON POWER SYSTEMS 16 (October 25, 2021): 231–40. http://dx.doi.org/10.37394/232016.2021.16.24.

Повний текст джерела

Анотація:

The article is devoted to the synthesis of a SMART-system for a complex industrial object control based on metaheuristic optimization algorithms and modern industrial equipment from Honeywell Company. There has been developed software for collecting industrial data, automated tuning of typical controllers of a MIMO industrial object based on such intelligent optimization algorithms as ant colony algorithm, grey wolf optimization, dragonfly algorithm and cuckoo search algorithm. These algorithms are used to minimize the developed new modified quality criteria of a MIMO industrial object. The re

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Vantsov, S. V., F. V. Vasiliev, and O. V. Khomutskaya. "TECHNOLOGICAL PROCESS CONTROL CAPABILITIES." NAUCHNOE PRIBOROSTROENIE 32, no. 3 (2022): 117–28. http://dx.doi.org/10.18358/np-32-3-i117128.

Повний текст джерела

Анотація:

The modern definition allows us to interpret the technological process as a complex system in interaction with the components of the environment, which leads to a beneficial effect. From this point of view, the technological process is subject to the general rules of control theory, thanks to which the principles and algorithms used in this theory can be adapted and extended to the control of technological processes. It is noted, however, that the main difference between the technological process and traditional control objects is the constant irresistible and degradative change in its charact

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Pishchukhin, Aleksandr, and Gulnara Akhmedyanova. "Multidimensional analysis of monitoring and diagnostic information on the technological process." MATEC Web of Conferences 224 (2018): 01022. http://dx.doi.org/10.1051/matecconf/201822401022.

Повний текст джерела

Анотація:

The study divides the analysis of monitoring and diagnostic information, leaving for monitoring the parameters of the stationary process, and for diagnostics various transient regimes in the technological process. This, in turn, divides the algorithms of information processing into control of the output from the given boundaries for stationary parameters and the classification and prediction for dynamically changing parameters in a multidimensional space. In view of the large number of monitoring and diagnostic information, as well as due to different algorithms for processing it in an appropr

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Spiridonov, Fedor, Ramis Mingazov, and Konstantin Shishakov. "Technological process automation of balancing quartz resonators of solid state wave gyroscopes." Automation and modeling in design and management 2023, no. 1 (2023): 21–31. http://dx.doi.org/10.30987/2658-6436-2023-1-21-31.

Повний текст джерела

Анотація:

The paper discusses the main issues that arise while developing and implementing automatic process control systems (APCS) in relation to the technological operations of balancing quartz hemispherical resonators of solid-state wave gyroscopes. For this, the article gives a general algorithm for performing the technological process of resonator balancing; block diagrams of the automatic process control system of balancing and the general algorithm for balancing the resonators. The latter discloses internal algorithms for determining the physical parameters of the gyroscope resonator, for making

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Valíček, Jan, Marta Harničarová, Pavel Koštial, Zora Jančíková, J. Zavadil, and Milena Kušnerová. "Identification and Prediction of Surface Topography with Regard to Variable Conditions of Cold Rolling Process." Key Engineering Materials 607 (April 2014): 5–10. http://dx.doi.org/10.4028/www.scientific.net/kem.607.5.

Повний текст джерела

Анотація:

Contribution of the work consists in creation of a mathematical model (algorithm) for prediction of technological parameters of the two-high rolling stand DUO 210 Sva and Q110 at change of the absolute reduction Δh, for example for a deep-drawing steel and of the brand KOHAL grade 697 and low carbon steel, as well as generally speaking for any rolled material. It is possible to identify and predict on the basis of this algorithm an instant state of surface topography in respect to variable technological conditions. On this basis it is then possible to calculate and plot individual main technol

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Kornilovich, S. A., and B. S. Trofimov. "PRECISION, STABILITY ANALYSIS OF THE CRANKSHAFT GRINDING TECHNOLOGICAL PROCESS." Russian Automobile and Highway Industry Journal 15, no. 6 (2019): 878–85. http://dx.doi.org/10.26518/2071-7296-2018-6-878-885.

Повний текст джерела

Анотація:

Introduction. The article is devoted to the problem of the crankshafts quality of automotive tractor engines on the example of YaMZ - 238NB engines. Despite years of experience in the repair industry to implement the technological process of the crankshafts grinding during their restoration, the quality of its implementation is not sufficient. Therefore, for reducing errors in restoring crankshafts, as well as in any other parts, it is possible only if the reasons for their occurrence are promptly identified. The purpose of the research is to identify the reasons of the errors in the process o

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Mantini, Alessandro. "Technological Sustainability and Artificial Intelligence Algor-ethics." Sustainability 14, no. 6 (2022): 3215. http://dx.doi.org/10.3390/su14063215.

Повний текст джерела

Анотація:

Since 2018, a new terminology has been developed, called Algor-ethics, indicating the necessity for a dedicated study concerning the evaluation of an ethics applied to technology, to Algorithms and to Artificial Intelligence (AI). At the same time, since 1987, when the concept of sustainability was introduced, the discussion on this issue has become increasingly lively and has now spread to every area of life. In this paper, we would like to propose an application of the concept of sustainability to technological processes and in particular to the elaboration of AI systems. To reach this goal

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Novikova, Tatyana. "STUDY OF A SET OF TECHNOLOGICAL OPERATIONS FOR THE PREPARATION OF CONIFEROUS SEED MATERIAL FOR REFORESTATION." Forestry Engineering Journal 11, no. 4 (2022): 150–60. http://dx.doi.org/10.34220/issn.2222-7962/2021.4/13.

Повний текст джерела

Анотація:

Preliminary studies have shown the need to develop an integrated approach to the problem of reforestation, which would take into account current trends in the field of ecophysiology, technology and technology of forestry, as well as the efficiency of technological processes. At the first stage, a reforestation algorithm was developed to implement this approach. The algorithm consists of 31 enlarged technological operations and 268 implementations of the algorithm. The algorithm was decomposed for further detailed study of technological operations and the development of a mathematical model aim

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Knyazev, S. V., N. A. Kozyrev, A. A. Usol’tsev, and A. R. Mikhno. "Algorithms for controlling the preparation of molding mixtures." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 77, no. 10 (2021): 1076–80. http://dx.doi.org/10.32339/0135-5910-2021-10-1076-1081.

Повний текст джерела

Анотація:

The formation of foundry and technological defects in castings is largely influenced by the quality of casting molds, which in most cases is determined by the composition and properties of the molding mixture. To ensure optimal parameters of the molding mixture, automation and optimization of control of technological processes of mixture preparation, algorithms for the functioning of process control systems have been developed. The description of the circuit and methods of control using process control system presented. It was shown that the algorithms provide the calculation of the generalize

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Koshevoy, N. D., V. V. Muratov, A. L. Kirichenko, and S. A. Borisenko. "APPLICATION OF THE “JUMPING FROGS” ALGORITHM FOR RESEARCH AND OPTIMIZATION OF THE TECHNOLOGICAL PROCESS." Radio Electronics, Computer Science, Control 1, no. 1 (2021): 57–65. http://dx.doi.org/10.15588/1607-3274-2021-1-6.

Повний текст джерела

Анотація:

Context. An application of the method of a “jumping frogs” search algorithm to construct optimal experiment plans for cost (time) in the study of technological processes and systems that allow the implementation of an active experiment on them is proposed. The object of study are optimization methods for cost (time) costs of experimental designs, based on the application of a “jumping frogs” search algorithm. Objective. To obtain optimization results by optimizing the search of a “jumping frogs” search algorithm for the cost (time) costs of plans for a full factorial experiment.&#x

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Aygun, Safarova Agamirza, and Dashdemirov Gunesh. "SOLUTİON TO THE PROBLEM OF OPTİMİZATİON OF A CATALYTİC REFORMİNG UNİT." Annali d'Italia 66 (April 29, 2025): 92–93. https://doi.org/10.5281/zenodo.15303112.

Повний текст джерела

Анотація:

The refining, petroleum separation and petrochemical industries have high demands on the quantity and quality of the resulting products, which leads to increased process complexity both technologically and structurally. The complexity of control also affects the complexity of the process structure. In such a situation, it is considered appropriate to control the process under optimal conditions.In the presented paper, an algorithm for solving an optimization problem based on a mathematical model of the reactor block of a catalytic reforming unit has been developed. This algorithm ensures

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Del Forno, Andrea. "L’intelligenza artificiale nei processi gestori dell’impresa. | Artificial Intelligence and the management process of the company." European Journal of Privacy Law & Technologies, no. 2 (2022): 111. http://dx.doi.org/10.57230/ejplt222adf.

Повний текст джерела

Анотація:

The contribution wants to provide an analysis of the state of the art in the field of artificial intelligence in the management processes of the companies, with a specific focus on the relevance that algorithms could cover in the corporate governance. Especially, starting from a general examination of artificial intelligence, the aim is to analyze what – currently – are the limits that do not allow an algorithm to directly cover the role of director within a board of directors. In fact, although the scientific literature is investigating in favor of openings on the topic, this possibility is h

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Shelkovyi, Oleksandr Mykolaiovych, Fedeniuk Dmytro, Valerii Letiuk, Serhii Myronenko, and Mykhailo Ishchenko. "SEARCH ALGORITHM UNDER THE CONDITIONS OF SERIAL PRODUCTION OF STRUCTURE OPTIONS OF THE TECHNOLOGICAL PROCESS OF MACHINING ON A GIVEN SET OF TECHNOLOGICAL EQUIPMENT." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 2(8) (November 3, 2023): 39–49. http://dx.doi.org/10.20998/2079-004x.2023.2(8).05.

Повний текст джерела

Анотація:

The article describes the algorithm for the formation of a set of options for the structures of technological processes (TP) of metal cutting on a given set of technological equipment and the sequence of operations in mass production. Variants of technological processes are presented in the form of a graph-tree, taking into account the sequence of operations and the possibility of using the main technological equipment for this. The algorithm for generating TP options is designed to form the most rational combination of the sequence of technological operations and the equipment on which they a

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Kamesheva, Saniya Bolatkizy, Mark Vladislavovich Mamchenko, and Rinat Romanovich Galin. "RESULTS OF THE RESEARCH ON THE ALLOCATION OF TASKS IN A COLLABORATIVE ROBOTIC SYSTEM WITH MINIMIZATION OF THEIR EXECUTION TIME." Chronos 7, no. 11(73) (2022): 103–7. http://dx.doi.org/10.52013/2658-7556-73-11-29.

Повний текст джерела

Анотація:

The article presents a generalized algorithm for allocation of tasks in a collaborative robotic system with minimizing the time of their execution (an algorithm of assigning the performers to work within the technological process), as well as the results of modeling the developed algorithm. The maximum value among the sums of the edge weights for the longest path from the source of the graph to its drain is used as the execution time of the technological process that needs to be minimized.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Amran, M. A. M., and P. I. Paderno. "Characteristics of the Fragment of Control and Defect Elimination Made During Implementation of the Technological Process." LETI Transactions on Electrical Engineering & Computer Science 17, no. 4 (2024): 21–29. http://dx.doi.org/10.32603/2071-8985-2024-17-4-21-29.

Повний текст джерела

Анотація:

This article considers a fragment of the technological process related to multi-stage monitoring of the production results (check, diagnostics, and elimination of the identified product defects). A general control algorithm is presented. This algorithm includes preliminary control at the workplace and diagnostic controls at thesite and workshop level, with subsequent elimination of the defects identified. An atypical elementary operation with three outputs was identified. All possible paths were analyzed followed by obtaining of analytical dependencies for probabilistic and time estimates, as

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Lipski, Jerzy, and Kazimierz Zaleski. "Implementation of artificial intelligence in optimisation of technological processes." MATEC Web of Conferences 252 (2019): 03008. http://dx.doi.org/10.1051/matecconf/201925203008.

Повний текст джерела

Анотація:

This article introduces an algorithm for determining optimal parameters of a technological process. The objective function is the processing time of operations (efficiency) at the constraint of quality requirements of finish according to the designer specification. The problem of selecting a correct combination of processing parameters may only be solved when the cause-and-effect relationship between the finish quality and the machining settings is known. If the process considered for optimisation is repeatable, it appears economically viable to invest resources in the development of a model t

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Élesztős, Pavel, Roland Jančo, and Vladimír Voštiar. "Optimization of Welding Process using a Genetic Algorithm." Strojnícky casopis – Journal of Mechanical Engineering 68, no. 2 (2018): 17–24. http://dx.doi.org/10.2478/scjme-2018-0014.

Повний текст джерела

Анотація:

AbstractWelding is a complex technological process in which local heating takes place up to the melting point of the connecting and the additional material. Phase and crystallization processes are a strong non-linear function of the cooling rate. This non-linear function multiplies the complexity of the numerical simulation and optimization of the welding process. Lately, optimization with genetic algorithm has become the trend to optimize systems that behave in a non-linear manner and contain a number of local extremes. Genetic algorithm is therefore a method by which we seek an absolute extr

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Fedotov, Vitaly, Natalia Chudakova, and Ramin Ismailov. "Automation of the technological process of spare parts at the car service company." E3S Web of Conferences 402 (2023): 10009. http://dx.doi.org/10.1051/e3sconf/202340210009.

Повний текст джерела

Анотація:

The article provides general information about the technological process of creating a stock of parts at a car service company. The research of the article is aimed at improving the management of the car service warehouse. In order to implement this idea, it is necessary to effectively supply spare parts to serviced passenger vehicles, by automating the ordering of parts in the 1C program: Enterprise. First of all, the authors have drawn up a concept and defined the purpose of the study - improving the efficiency of service. In order to achieve the goal, the task is to create an automated syst

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Hrabovskyi, H. H., and M. H. Ievlev. "Direct digital control in the systems of technological process automation." Mathematical machines and systems 4 (2023): 58–67. http://dx.doi.org/10.34121/1028-9763-2023-4-58-67.

Повний текст джерела

Анотація:

In direct digital control (DDC) systems, computers replace traditional analog control devices. Direct digital control systems not only more efficiently perform the functions carried out by analog control devices but also provide new opportunities for increasing control flexibility, such as reprogramming to achieve the required control effects. The principles of developing di-rect digital control systems are described using the example of systems for regulating the tech-nological parameters of rolling. Both analog and discrete automatic control systems (ACS) are used to control mechanisms and e

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Yu Mamasodikova, N., I. X. Siddikov, and X. E. Dilmurodov. "Building models of technological processes based on neuro-fuzzy technology." Journal of Physics: Conference Series 2697, no. 1 (2024): 012029. http://dx.doi.org/10.1088/1742-6596/2697/1/012029.

Повний текст джерела

Анотація:

Abstract The work considers the issues of formalization of the extraction process in the form of a generalized regression neural network model, which are the basis for solving the problem of analysis and synthesis of the extraction process control system for obtaining petroleum products. An adaptive learning algorithm for a neural network model has been developed that is characterized by high speed and accuracy. A comparative analysis of the developed model with existing ones was made, which showed the effectiveness of the proposed algorithm for building the architecture of neural network mode

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Korobko, T. B., and E. S. Kozachishena. "The mathematical model for calculating the thickness distribution of the metal in stamping in multisection dies with rotating discs." Izvestiya MGTU MAMI 7, no. 2-2 (2013): 110–15. http://dx.doi.org/10.17816/2074-0530-68091.

Повний текст джерела

Анотація:

In this article the authors have proposed a mathematical model to calculate the thickness distribution of the product when drawing of axisymmetric parts in the stamp with multisection rotating discs for correction of technological parameters of the process. The model considers the mechanism of stress-deformed state, geometrical relations and approximation algorithm. Euler's method was used to solve the problem allowing determine the parameters of the next step of integration, basing in the previous results. This algorithm allows to make quick adjustments with the appearance of additional condi

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Melikov, E. A. "Decomposition algorithm and mathematical models of hierarchical structure of control of the process of primary oil processing." Prospecting and Development of Oil and Gas Fields, no. 2(67) (May 14, 2018): 75–82. http://dx.doi.org/10.31471/1993-9973-2018-2(67)-75-82.

Повний текст джерела

Анотація:

The article considers the development of deterministic and probabilistic models and control algorithm for the technological process of primary oil processing, as well as the solution of the problem of optimal control in the form of stochastic programming. To solve the problem of optimization of the researched technological system functioning by means of the Lagrange multiplier method, the decomposition algorithm and a method based on the transformation of the original problem on the principle of a deterministic analog have been developed. The principles of constructing an optimal control

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Grechushnikov, Vladislav V., Alexander A. Shilin, and Sergey V. Prohorov. "Synthesis of an algorithm for automated adjustment of lumber drying based on linguistic information." Bulletin of the Tomsk Polytechnic University Geo Assets Engineering 335, no. 6 (2024): 75–88. http://dx.doi.org/10.18799/24131830/2024/6/4500.

Повний текст джерела

Анотація:

Relevance. Lumber drying is associated with high risks of obtaining a low-quality or even unusable product. The problem under consideration has a number of reasons, both in violation of the technological process and in incorrect settings of drying mode parameters at different stages. The procedure for automated adjustment of parameters is usually associated with a linguistic assessment of the quality of the product, according to which a decision on adjusting the parameters should be made, taking into account signs of a violation of the technological process. Technical and scientific publicatio

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Sokolov, M. V., P. S. Belyaev, and A. S. Klinkov. "Calculation of Process and Design Parameters of Twin Screw Mixers with Minimization of Technological Capacity." Vestnik Tambovskogo gosudarstvennogo tehnicheskogo universiteta 28, no. 1 (2022): 103–10. http://dx.doi.org/10.17277/vestnik.2022.01.pp.103-110.

Повний текст джерела

Анотація:

The formulation of the optimization problem and its solution in the processing of adhesive compositions in twin-screw machines are considered under the condition of minimizing the technological capacity. An algorithm and a computer program for calculating the optimal technological and design parameters of twin screw mixers have been developed.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Kornyushko, V. F., O. M. Nikolaeva, A. V. Panov, R. R. Biglov, and A. S. Kuznetsov. "Quality management of the chemical-technological process for continuous synthesis of pharmaceutical substances of medicinal compounds in flow microreactors." Fine Chemical Technologies 16, no. 3 (2021): 252–66. http://dx.doi.org/10.32362/2410-6593-2021-16-3-252-266.

Повний текст джерела

Анотація:

Objectives. The introduction of digital tools for the development of medicines, intelligent management systems, and quality control is stipulated not only by modern requirements for the chemical and pharmaceutical industry but also by strict regulatory requirements for manufactured products. This principle ensures the release of a quality product on the first attempt. The aim of this study is to develop information support for the intelligent quality management system for the production of active pharmaceutical substances (APSs) for medicines using a fundamentally new technology: continuous sy

Стилі APA, Harvard, Vancouver, ISO та ін.

42

V. G., Mironenko. "Additional intellect in the technological processes of agro-industrial production." MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION, no. 1(116) (2023): 199–205. http://dx.doi.org/10.37204/2786-7775-2023-1-22.

Повний текст джерела

Анотація:

Purpose. To increase the efficiency of decision-making by the operator of mechanized technological processes of agro-industrial production. Methods. Analysis of the possibilities of increasing the efficiency of agro-industrial production through the formation of intellectual proposals by appropriate technical means. Synthesis of the general structure of the neuro-like network of additional intelligence of operational management of agricultural technological processes and the principles of formation of the algorithm of its action. Results. Model of organization of additional technical intellige

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Iskenderov, N. Sh. "Innovative estimation of state of thermocouples in operation process." Azerbaijan Oil Industry, no. 03 (March 15, 2022): 38–43. http://dx.doi.org/10.37474/0365-8554/2022-03-38-43.

Повний текст джерела

Анотація:

The temperature is one of the most significant characteristics specifying and affecting the whole cycle of technological process. It has a number of principle features, which justify the necessity of using numerous methods and ways of measurement. From this point of view temperature may be reviewed by the changes of some physical properties of the objects (volume, pressure, thermoEMF, electric resistance etc.). The temperature measurement is applied in the systems of control and management, as well as while improving the quality of technological processes in various industrial enterprises, whe

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Melikov, E. A., T. M. Magerramova, and A. A. Safarova. "CONTROL PROBLEM FOR A VACUUM TECHNOLOGICAL COMPLEX." Eurasian Physical Technical Journal 21, no. 4(50) (2024): 71–78. https://doi.org/10.31489/2024no4/71-78.

Повний текст джерела

Анотація:

Based on a comprehensive study of technological processes occurring in the vacuum block for an installation of the ELOU-AVT type, the features for the complex technological complex under consideration as a control object were analyzed. In this regard, a physically based mathematical formulation for the optimal control problem of the block under study has been developed, taking into account restrictive conditions on control and input parameters. Taking into account the compiled mathematical models for the quantitative and qualitative characteristics of the process under consideration and the al

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Kudryavtsev, Yevgeniy M. "Structurally-Parametrical Optimization Technological Process by Dijkstra's Method in System Mathcad." Materials Science Forum 931 (September 2018): 1238–44. http://dx.doi.org/10.4028/www.scientific.net/msf.931.1238.

Повний текст джерела

Анотація:

The article describes the procedure of structurally-parametrical optimization of technological process by Dijkstra's method with using of Dijkstra’s functional (recurrent) equation and Mathcad system. The technological process includesnof operations and each operation can be executed by various types of equipment. Expenses (cost, time, ...) on execution ofioperation bykequipment after execution byjequipment (i-1) operation are known -c(i, j, k). The algorithm of the decision of a problem by Dijkstra’s method includes two phases.The firstphase is calculations of the minimum expenses for executi

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Knobloch, Roman, and Jaroslav Mlýnek. "DIFFERENTIAL EVOLUTION ALGORITHM IN MODELS OF TECHNICAL OPTIMIZATION." Anwendungen und Konzepte der Wirtschaftsinformatik, no. 14 (December 9, 2021): 6. http://dx.doi.org/10.26034/lu.akwi.2021.3321.

Повний текст джерела

Анотація:

At present, evolutionary optimization algorithms are increasingly used in the development of new technological processes. Evolutionary algorithms often allow the optimization procedure to be performed even in cases where classical optimization algorithms fail (e.g. gradient methods) and where an acceptable solution is sufficient to solve the optimization task. The article focuses on possibilities of using a differential evolution algorithm in the optimization process. This algorithm is often referred to in the literature as a global optimization procedure. However, we show by means of a practi

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Bezjazychnyi, V. F., and A. S. Terekhova. "THE ALGORITHM FOR JUSTIFYING THE CHOICE OF TECHNOLOGICAL THE MACHINING PROCESS OF A PART BASED ON A COMPLEX CRITERION FOR EVALUATING ITS EFFECTIVENESS." Spravochnik. Inzhenernyi zhurnal, no. 273 (December 2019): 1–24. http://dx.doi.org/10.14489/hb.supp.2019.12.pp.001-024.

Повний текст джерела

Анотація:

The proposed option justify the selection of a specified set of one technological process, based on complex criterion that takes into account the duration of the production cycle of manufacturing parts based on performance, cost and quality. The algorithm of choice of the technological process of manufacturing integrated optimization criterion is provided for solving the problem in the context of a specific base of existing technological equipment.

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Qu, Li Gang, Da Wei Wu, and Jun Mei Ding. "Technological Study on the 3D Collaborative Design System Oriented Project Management." Applied Mechanics and Materials 16-19 (October 2009): 1189–93. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.1189.

Повний текст джерела

Анотація:

The concept and content of project management in the networked collaborative design system is presented according to the mechanical product design typical process and its state-of-the-art requirement. The key technologies of the collaborative project management are studied mainly, the Fuzzy Analytic Hierarchy Process (F-AHP) algorithm is employed to select collaborative partners, the method of Design Structure Matrix (DSM) is put forward in process of decomposing and assigning design tasks, and the weight-coefficient recursively statistic algorithm is used in controlling task schedule. The imp

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Yao, Yuchun, Yan Wang, Lining Xing, and Hao Xu. "An optimization method of technological processes to complex products using knowledge-based genetic algorithm." Journal of Knowledge Management 19, no. 1 (2015): 82–94. http://dx.doi.org/10.1108/jkm-11-2014-0454.

Повний текст джерела

Анотація:

Purpose – This paper applies the knowledge-based genetic algorithm to solve the optimization problem in complex products technological processes. Design/methodology/approach – The knowledge-based genetic algorithm (KGA) is defined as a hybrid genetic algorithm (GA) which combined the GA model with the knowledge model. The GA model searches the feasible space of optimization problem based on the “neighborhood search” mechanism. The knowledge model discovers some knowledge from the previous optimization process, and applies the obtained knowledge to guide the subsequent optimization process. Fin

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Ilyushin, Pavel, Boris Papkov, Aleksandr Kulikov, and Konstantin Suslov. "Algorithm and Methods for Analyzing Power Consumption Behavior of Industrial Enterprises Considering Process Characteristics." Algorithms 18, no. 1 (2025): 49. https://doi.org/10.3390/a18010049.

Повний текст джерела

Анотація:

Power consumption management is crucial to maintaining the reliable operation of power grids, especially in the context of the decarbonization of the electric power industry. Managing power consumption of industrial enterprises by personnel proved ineffective, which required the development and implementation of automatic energy consumption management systems. Optimization of power consumption behavior requires comprehensive and reliable information on the parameters of the technological processes of an industrial enterprise. The paper explores the specific features of non-stationary condition

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!