Готові списки джерел за темами / B.C.-105 B.C

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "B.C.-105 B.C"

Автор: Grafiati

Опубліковано: 28 липня 2024

Оновлено: 30 липня 2024

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "B.C.-105 B.C".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "B.C.-105 B.C"

El-Mukhlef, Ali, Shoala A. Kharouf Kharouf, and Ahmad Al-Khalaf. "Effect of Temperature on Efficacy of the Entomopathogenic Fungi Beauveria bassiana and Metarhizum anisopliae Against the Sunn Pest, Eurygaster integriceps Puton." Arab Journal for Plant Protection 41, no. 2 (2023): 134–39. http://dx.doi.org/10.22268/ajpp-41.2.134139.

Повний текст джерела

Анотація:

El-Mukhlef, A.A., Sh.A. Kharouf and A. Al-Khalaf. 2023. Effect of Temperature on Efficacy of the Entomopathogenic Fungi Beauveria bassiana and Metarhizum anisopliae Against the Sunn Pest, Eurygaster integriceps Puton. Arab Journal of Plant Protection, 41(2): 134-139. https://doi.org/10.22268/AJPP-41.2.134139 An experiment was conducted in the plant protection laboratory of the Directorate of Agriculture and Agrarian Reform in Raqqa Province during 2013, to assess the effect of temperature and four spores suspension concentrations (1.5×102 , 103 , 104 and 105 spores/insect) on the efficacy of Beauveria bassiana and Metarhizum anisopliae against the Sunn pest (Eurygaster inegriceps Puton). Insect adults dorsal side were inoculated with 1.5×103 spores/insect of B. bassiana and caused insects mortality at a temperature range of 22-31°C, with optimum effect at 25°C, with a LT50 of 5.3 days after inoculation. In contrast, M. anisopliae had a wider temperature range up to 37°C, with optimal effect at 28- 31°C with LT50 of 5 days. No significant differences were observed between the fungal concentrations of 1.5×103 and 1.5×105 . Results obtained for using the four fungal spore suspension concentrations (1.5×102 , 1.5×103 , 1.5×104 , 1.5×105 spores/insect) under optimum conditions for each fungus indicated that the LT50 was close among concentrations, whereas, there was significant difference between the fungal two concentrations 1.5×102 and 1.5×104 , and B. bassiana was most effective at 1.5×104 spores/insect, in contrast to M. anisopliae which was most effective at 1.5×102 spores/insect. Keywords: Beauveria bassiana, Metarhizum anisopliae, Eurygaster inegriceps, Sunn Pest, biological control.

Стилі APA, Harvard, Vancouver, ISO та ін.

Householder, Aaron, Lauren M. Weiss, James E. Owen, Howard Isaacson, Andrew W. Howard, Daniel Fabrycky, Leslie A. Rogers, et al. "Investigating the Atmospheric Mass Loss of the Kepler-105 Planets Straddling the Radius Gap." Astronomical Journal 167, no. 2 (January 31, 2024): 84. http://dx.doi.org/10.3847/1538-3881/ad19c6.

Повний текст джерела

Анотація:

Abstract An intriguing pattern among exoplanets is the lack of detected planets between approximately 1.5 R ⊕ and 2.0 R ⊕. One proposed explanation for this “radius gap” is the photoevaporation of planetary atmospheres, a theory that can be tested by studying individual planetary systems. Kepler-105 is an ideal system for such testing due to the ordering and sizes of its planets. Kepler-105 is a Sun-like star that hosts two planets straddling the radius gap in a rare architecture with the larger planet closer to the host star (R b = 2.53 ± 0.07 R ⊕, P b = 5.41 days, R c = 1.44 ± 0.04 R ⊕, P c = 7.13 days). If photoevaporation sculpted the atmospheres of these planets, then Kepler-105b would need to be much more massive than Kepler-105c to retain its atmosphere, given its closer proximity to the host star. To test this hypothesis, we simultaneously analyzed radial velocities and transit-timing variations of the Kepler-105 system, measuring disparate masses of M b = 10.8 ± 2.3 M ⊕ (ρ b = 3.68 ± 0.84 g cm−3) and M c = 5.6 ± 1.2 M ⊕ (ρ c = 10.4 ± 2.39 g cm−3). Based on these masses, the difference in gas envelope content of the Kepler-105 planets could be entirely due to photoevaporation (in 76% of scenarios), although other mechanisms like core-powered mass loss could have played a role for some planet albedos.

Стилі APA, Harvard, Vancouver, ISO та ін.

REDDY, N. RUKMA, KRISTIN M. MARSHALL, TRAVIS R. MORRISSEY, VIVIANA LOEZA, EDUARDO PATAZCA, GUY E. SKINNER, KATHIRAVAN KRISHNAMURTHY, and JOHN W. LARKIN. "Combined High Pressure and Thermal Processing on Inactivation of Type A and Proteolytic Type B Spores of Clostridium botulinum." Journal of Food Protection 76, no. 8 (August 1, 2013): 1384–92. http://dx.doi.org/10.4315/0362-028x.jfp-12-538.

Повний текст джерела

Анотація:

The aim of this study was to determine the resistance of multiple strains of Clostridium botulinum type A and proteolytic type B spores exposed to combined high pressure and thermal processing and compare their resistance with Clostridium sporogenes PA3679 and Bacillus amyloliquefaciens TMW-2.479-Fad-82 spores. The resistance of spores suspended in N-(2-acetamido)-2-aminoethanesulfonic acid (ACES) buffer (0.05 M, pH 7.0) was determined at a process temperature of 105°C, with high pressures of 600, 700, and 750 MPa by using a laboratory-scale pressure test system. No surviving spores of the proteolytic B strains were detected after processing at 105°C and 700 MPa for 6 min. A >7-log reduction of B. amyloliquefaciens spores was observed when processed for 4 min at 105°C and 700 MPa. D-values at 105°C and 700 MPa for type A strains ranged from 0.57 to 2.28 min. C. sporogenes PA3679 had a D-value of 1.48 min at 105°C and 700 MPa. Spores of the six type A strains with high D-values along with C. sporogenes PA3679 and B. amyloliquefaciens were further evaluated for their pressure resistance at pressures 600 and 750 MPa at 105°C. As the process pressure increased from 600 to 750 MPa at 105°C, D-values of some C. botulinum strains and C. sporogenes PA3679 spores decreased (i.e., 69-A, 1.91 to 1.33 min and PA3679, 2.35 to 1.29 min). Some C. botulinum type A strains were more resistant than C. sporogenes PA3679 and B. amyloliquefaciens to combined high pressure and heat, based on D-values determined at 105°C. Pulsed-field gel electrophoresis (PFGE) was also performed to establish whether strains with a similar restriction banding pattern also exhibited similar D-values. However, no correlation between the genomic background of a strain and its resistance to high pressure processing was observed, based on PFGE analysis. Spores of proteolytic type B strains of C. botulinum were less resistant to combined high pressure and heat (700 MPa and 105°C) treatment when compared with spores of type A strains.

Стилі APA, Harvard, Vancouver, ISO та ін.

Billah, Mustansar, Syed Muhammad Raza Shah, and Muhammad Mujtaba Hashir. "HEPATITIS B AND HEPATITIS C;." Professional Medical Journal 25, no. 08 (August 4, 2018): 1245–51. http://dx.doi.org/10.29309/tpmj/2018.25.08.88.

Повний текст джерела

Анотація:

Objectives: To determine the frequency of HBV and HCV among blood donorscoming voluntarily at the blood bank of Ibne- Siena hospital and research centre, Multan,Pakistan, to ascertain the disease burden in the community for their future prevention andcontrol. Study Design: It was a descriptive, cross- sectional study on blood units donated byhealthy individuals coming voluntarily for blood donation, and willing to get their blood testedfor HBV, HCV. Setting: Community medicine department of Multan medical and dental collegeMultan, and blood bank of affiliated tertiary hospital, Ibn-e- Siena hospital Multan. Period: Sixmonths period from Jan 2016 to June 2016. Materials and Methods: Data of the blood donorswas collected. Present study was based on previous well maintained records of hospital bloodbank. During the reported period, a total of 1195 blood donors attended the blood bank, andthey all were screened for HBsAg and anti-HCV. SPSS- 16 was used to analyze the data, fordetermination of frequencies of Hepatitis- B, and C according to the age and gender. Results:Total numbers of blood donors were 1195. 1191 were males, and 4 were females. All thefemales were negative for both HBV, and HCV. Males positive for HBV were 18 (1.5 %), andthose Positive for HCV were 27 (3.2%).

Стилі APA, Harvard, Vancouver, ISO та ін.

Ahaotu, Ihuoma, Marvis Wondikom, and Ndukwe Maduka. "A preliminary study on the effect of storage temperatures on the population of Bacillus cereus in dry ginger powder." Journal of Bioscience and Biotechnology Discovery 6, no. 5 (December 30, 2021): 53–57. http://dx.doi.org/10.31248/jbbd2021.159.

Повний текст джерела

Анотація:

The formation of spores and increase in population of vegetative cells of Bacillus cereus associated with foodborne diseases is dependent on favourable temperature. In this study, B. cereus in a slant obtained from Microbiology Laboratory, University of Port Harcourt was confirmed based on morphological and biochemical tests and inoculated into dry ginger powder using a sterile pipette. The samples were stored at ambient temperature (25°C), refrigeration temperature (4°C) and freezer temperature (-18°C) for 21 days and the microbial counts of B. cereus was monitored at 7 days interval using Bacillus cereus agar base and standard microbiological methods. The result obtained showed that B. cereus steadily increased in population under the storage conditions. The highest microbial count recorded for B. cereus in dry ginger powder stored at 25°C, 4°C and -18°C was 7.15×101 ±0.036, 1.07×102 ± 0.061 and 2.91×102 ± 0.070 CFU/g, respectively. Although the values did not exceed 105 cells/g required to manifest foodborne illness in humans, it remains a risk to public health due to increasing population of B. cereus in dry ginger powder under the storage conditions.

Стилі APA, Harvard, Vancouver, ISO та ін.

Jiang, Tao, Zhi Hao Jin, Jian Feng Yang, and Guan Jun Qiao. "High Temperature Oxidation Behavior of the B₄C/BN Composites." Advanced Materials Research 105-106 (April 2010): 133–36. http://dx.doi.org/10.4028/www.scientific.net/amr.105-106.133.

Повний текст джерела

Анотація:

The B4C/BN composites were fabricated by hot-pressing process. The microstructure, mechanical properties and oxidation resistances of the B4C/BN composites were investigated. It was shown that the h-BN particles were distributed in the B4C ceramics matrix. The mechanical properties of the B4C/BN microcomposites and the B4C/BN nanocomposites decreased gradually with the increasing content of h-BN. The mechanical properties of the B4C/BN nanocomposites were significantly improved in comparison with the B4C/BN microcomposites. The oxidation processes were performed at 1000oC, 1100oC, 1200oC, 1300oC for 20h. The oxidation curves of the B4C monolith, the B4C/BN microcomposites and the B4C/BN nanocomposites decreased gradually with the increase of oxidation temperature and oxidation time. The specimen’s weight and the oxidation resistance decreased gradually with the increase of oxidation temperature and oxidation time. The specimens remained good oxidation resistance at 1000oC; the oxidation resistance decreased remarkably at 1300oC. The decreasing specimen’s weight was attributed to the evaporation of B2O3 which produced by oxidation process of B4C and h-BN. The phase composition and microstructure of specimen’s surface after oxidation process were investigated by XRD and SEM.

Стилі APA, Harvard, Vancouver, ISO та ін.

Pollitt, J. J., and Brunilde Sismondo Ridgway. "Prayers in Stone: Greek Architectural Sculpture: c. 600-100 B. C. E." American Journal of Archaeology 104, no. 2 (April 2000): 400. http://dx.doi.org/10.2307/507482.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gerner, P. "Hepatitis B und C im Kindesalter." Kinder- und Jugendmedizin 09, no. 04 (2009): 196–203. http://dx.doi.org/10.1055/s-0038-1629062.

Повний текст джерела

Анотація:

ZusammenfassungDie Therapie der chronischen Hepatitis B und C konnte in den letzten Jahren durch neue Medikamente und Therapieregime weiter verbessert werden. Im Kindesalter ist die Therapie der chronischen Hepatitis B in der hochvirämischen Phase indiziert, sofern die Transaminasen des Patienten mindestens um das 1,5- bis 2-Fache der Norm erhöht sind. Die zur Verfügung stehenden Medikamente sind Interferon-α und die Nukleosid(tid)analoga Lamivudin und Adefovir dipivoxil. Eine Behandlung mit Interferon-α führt bei 26–38 % der Patienten, die Therapie mit Nukleosid- oder Nukleotidanaloga nach einem Jahr bei 17–36 % zur anti-HBe-Serokonversion und damit zum Verlust von HBeAg und einem dramatischen Abfall der HBVDNA und meist auch der Transaminasen. Wäh-rend die Therapie bislang nach zwölf Monaten beendet wurde, empfiehlt sich heute eine Langzeittherapie bis sechs Monate über die anti-HBe-Serokonversion hinaus. Die Entwicklung weiterer Nukleosidanaloga lässt eine bessere Therapieeffektivität erhoffen. Eine Ausheilung, die anti-HBs-Konversion, wird nur bei rund 5 % und fast nur durch eine Interferon-α-Therapie erreicht. Der Therapieerfolg wird maßgeblich von der Höhe der Viruslast vor Behandlung und dem Grad der Leberentzündung beeinflusst.Im Gegensatz zur Hepatitis B ist das primäre Therapieziel bei chronischer Hepatitis C die Heilung des Patienten. Mittlerweile hat sich die Kombinationstherapie mit Interferon-α und Ribavirin, je nach HCV-Genotyp über 6–12 Mona-te bewährt. Etwa 80 % der Kinder sind mit Genotyp 1 infiziert. Sie haben eine Heilungschance von ca. 50 %. Die Genotypen 2 oder 3 spre-chen deutlich besser auf die Behandlung an. Sie können zu etwa 90 % erfolgreich therapiert werden. Genotyp 4 ist relativ selten und scheint auf eine Behandlung in etwa 70 % anzuspre-chen. Bei erfolglos behandelten Patienten, die aber während oder direkt nach der Therapie zumindest kurzzeitig virusnegativ waren, sollte eine Retherapie erwogen werden. Zudem kann gehofft werden, dass in einigen Jahren neue Medikamente wie Protease- und Polymerase -inhibitoren zur Verfügung stehen, die zurzeit bei erwachsenen Patienten getestet werden.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ali, A. Raza, N., S. Qayyum, S. M. Y. ,. Farooq, A. Jillani, M. ,. Nauman, A. R. Ghazi, H. Imran, S. Mushtaq, and M. Z. Ul Abidin. "Sonographic Findings in patients of Hepatitis B & C." Pakistan Journal of Medical and Health Sciences 16, no. 8 (August 31, 2022): 11–14. http://dx.doi.org/10.53350/pjmhs2216811.

Повний текст джерела

Анотація:

Background: Role of Ultrasound into Acute Viral Hepatitis is inadequate for excluding jaundice surgical reasons. Though, here are definite features of ultrasound that may assist us for expect acute viral hepatitis in preliminary only some days previous to clinical jaundice onset. Aim: To determine the sonographic findings in patients of Hepatitis B and Hepatitis C. Methodology: A descriptive study was conducted at The university of Lahore Teaching Hospital Lahore after Ethical Review Board approval at university of Lahore faculty of Allied Health sciences, Lahore. On the basis of diagnosis inclusion criteria were included adult patients of both genders for abdominal ultrasound. And patients who are willing to participate. In exclusion Criteria excluded the Patient present with any known pathologies. Collection of data was done by the help of convenient technique of sampling according to gender, age as well as sonographic findings of patients with acute viral hepatitis B & C. Results: Out of total number of 162 patients, 129(79%) were males and 33(20%) were females, 94(58%) patients had fever and 68(42%) had no fever. Out of total number of 162 patients, 57(35%) patients had positive Hepatitis B, 105(64%) had negative, 73(45%) patients had positive Hepatitis C, 89(54%) had negative, 67(41%) patients alter liver parenchymal echotexture, 68(42%) had coarse liver echotexture and 27 (16%) had normal homogenous echotexture. 63(38%) patients had irregular margins of liver and 99(61%) had regular margins of liver. 63(39%) had chronic liver disease, 25(15%) had hepatomegaly and 74(45%) had normal size. Conclusion: From our study, we concluded that cirrhosis of liver related with Hepatitis B and Hepatitis C virus more ordinary within man than woman. Cirrhosis of liver related with Hepatitis B and Hepatitis C virus are majorly affect the rural areas. Keywords: Hepatitis B & C, Ultrasonography, Chronic liver disease, Jaundice, liver parenchymal disease.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Chih-Chiang, Kuan-Yu Chen, Wei-Sheng Yeh, Yan-Kuin Su, and Zi-Hao Wang. "Ultraviolet Photodetection Application in Magnesium Indium Oxide Thin Film Transistors via Co-Sputtering Deposition." Applied Sciences 10, no. 15 (July 26, 2020): 5128. http://dx.doi.org/10.3390/app10155128.

Повний текст джерела

Анотація:

A magnesium-doped indium oxide (In2O3:Mg) ultraviolet (UV) thin film phototransistor was fabricated via cosputtering of MgO and In2O3. Three samples with different sputtering power values of In2O3 ranging from 40 to 60 W, namely, sample A with 40 W, sample B with 50 W, and sample C with 60 W, were used in this study. Results confirmed that oxygen vacancy concentration evidently indicates indium content. The experimental results showed that responsivities of samples, defined as the ratio of photocurrent under illumination per input power, increase from 0.0086 to 2.6 A/W. Rejection ratios were 1.2 × 104, 4.3 × 105, and 4.8 × 105 for samples A, B, and C, respectively. Based on our results, sample C is the best among the three MgInO UV phototransistors investigated in this study.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "B.C.-105 B.C"

SILVA, Gustavo Souza de Alencar e. "Sinterização por SPS de pós de W-C-CO-B preparados por moagem de alta energia." Universidade Federal de Alfenas, 2016. https://bdtd.unifal-mg.edu.br:8443/handle/tede/1057.

Повний текст джерела

Анотація:

Os carbetos de tungstênio com matriz de cobalto são uns dos mais antigos produtos comerciais da metalurgia do pó. Estes compósitos são usados para diferentes aplicações dentre as quais se destacam a fabricação de componentes de corte e abrasivos. Tais materiais são constituídos por partículas de carbeto de tungstênio e cobalto metálico ligados pela sinterização via fase líquida e podem ser produzidos por reações químicas convencionais. As técnicas de moagem de alta energia são amplamente utilizadas para a síntese de compostos cerâmicos. O presente trabalho visou a realização de estudos de moagem de alta energia e de sinterização de misturas de pós de carbeto de tungstênio dopados com cobalto e boro. A etapa de moagem das misturas de pós elementares de W-50C (%-at.) foi realizada em um moinho de bolas planetário Fritsch P-5 utilizando esferas (10 mm de diâmetro) e vaso de WC-Co, velocidade de 200 rpm e uma relação de massas esferas-pós de 10:1. O tempo de moagem foi variado: 20, 60, 180 e 600 min. Na sequência, os pós de Co e de B foram misturados com os pós moídos de W-50C (%-at) e processados em um moinho Spex por 5 min. Seguindo, os materiais foram sinterizados em atmosfera controlada à 1450oC para a obtenção de corpos cilíndricos com altura de 1-3 mm e diâmetro de 10 mm. Os pós-moídos e os produtos sinterizados foram avaliados com o auxílio das técnicas de difração de raios X (DRX), microscopia eletrônica de varredura (MEV), espectrometria por dispersão de energia (EDS) e ensaios mecânicos (compressão diametral e dureza Vickers). Picos de carbono desapareceram após 180 min de moagem, enquanto que o pico principal do tungstênio foi deslocado para a direção de menores ângulos de difração em pós de W-50C moídos por 600 min. Ainda, os picos de tungstênio foram alargados e tiveram suas intensidades reduzidas em misturas de pós de W-50C moídos por 600 min, sugerindo que os átomos de carbono ficaram dissolvidos na estrutura cristalina do tungstênio para formar soluções sólidas supersaturadas. Amostras densas (> 96% da massa específica teórica) com microestruturas formadas pela fase WC como matriz além de precipitados ricos em boro e de W2C foram obtidos após spark plasma sintering das misturas de pós contendo adição de boro. As amostras sinterizadas apresentaram valores de dureza Vickers entre 1841 HV e 2191 HV, as quais foram mais pronunciadas para as cerâmicas mais ricas em boro. Similarmente à cerâmica convencional de WC-6Co, nenhum efeito foi encontrado sobre a adição de boro no módulo elástico das cerâmicas avaliadas, as quais ficaram próximas de 500 GPa. Ao contrário, a resistência compressiva das cerâmicas de WC-6Co contendo adição de boro ficou inferior a 500 MPa.
Tungsten carbides in cobalt matrix are one of the earliest commercial products of powder metallurgy. These composites are used for different applications among which are highlighted the manufacture of cutting components and abrasives. These composites consist of tungsten carbide and metallic cobalt particles bound by sintering through the liquid phase and they can be produced by conventional chemical reactions. Mechanical alloying techniques are widely used for the synthesis of ceramic compounds. The present work aims to perform studies of mechanical alloying and sintering of powder mixtures of tungsten carbide doped with cobalt (6 wt.-%) and boron (0.2 and 0.5 at.%). Ball milling of W-50C (at.-%) elemental powder mixtures was performed in a planetary Fritsch P-5 ball mill using WC-Co balls (10 mm diameter) and vial (500 mL), rotary speed of 200 rpm, and a ball-to-powder weight ratio of 10:1. The milling time was varied: 20, 60, 180 and 600 minutes. Following, the powders of Co and B were mixed for 5 min in a Spex mill together the previous mechanically alloyed W-50C (at.-%) powders. Afterwards, the as-milled powders were consolidated by spark plasma sintering (SPS) at 1450°C under controlled atmosphere to obtain cylindrical bodies with height of 1-3 mm and 10 mm diameter. The as-milled powders and sintered products were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and mechanical tests (diametrical compression and Vickers hardness). Peaks of carbon disappeared after milling for 180 min whereas the major W peak was shifted toward the lower diffraction angles in W-50C powders milled for 600 min. In addition, the peaks of W were broadened and their intensities reduced after milling for 600 min, suggesting that the carbon atoms were dissolved into the W lattice in order to form supersaturated solid solutions. SPS process of mechanically alloyed W-50C powders containing Co and B produced dense samples (> 96% of theorical specific mass) which presented microstructures formed by the WC phase as matrix beside the B-rich and W2C precipitates. SPS samples presented Vickers hardness values between 1841 HV and 2191 HV which were more pronounced for B-richer ceramics. For the evaluated ceramics, no effect of boron addition on the elastic module was found, which were close to 500 GPa. On the other hand, the compressive strenght of W-50C ceramics containing Co and B addition were lower than 500 MPa.
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Стилі APA, Harvard, Vancouver, ISO та ін.

Granone, Luis Ignacio [Verfasser], Detlef [Akademischer Betreuer] Bahnemann, Nadja-C. [Akademischer Betreuer] Bigall, and Cecilia B. [Akademischer Betreuer] Mendive. "An iron-based photoelectrode / Luis Ignacio Granone ; Detlef W. Bahnemann, Nadja-C. Bigall, Cecilia B. Mendive." Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2019. http://nbn-resolving.de/urn:nbn:de:101:1-2019091902085894972941.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Doukas, Georgios. "Pierre Boaistuau (c. 1517-1566) and the employment of humanism in mid sixteenth-century France." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3239/.

Повний текст джерела

Анотація:

This study examines the manifestations of French humanism in sixteenth-century intellectual culture, through an analysis, for the first time, of the entirety of the works of Pierre Boaistuau. An eminent French humanist writer, on whose life little information exists, Boaistuau emerges far more prolific than any previous study has hitherto recognised. Thus, on a first level, his case offers the opportunity for an exploration of the developments of French print culture at the time. In addition, careful examination of the contents of his widely circulated works sheds new light on the ways humanist themes and values were incorporated into contemporary literary production, and were used for different purposes which surpassed the mere celebration of ancient learning. Boaistuau employed seven genres in order to compile seven books of different natures, all of them however grafted onto a humanist framework. Associated with narrative fiction, Renaissance philosophy, political theory, the study of history, and natural philosophy, his works demonstrate how the classical past and the humanist values of virtue, erudition, and self-discipline were used in a variety of ways in mid sixteenth-century France: for promotion of a moralising message, praise of the French monarchy, bolstering the Catholic faith, and enhancing the understanding of the natural world.

Стилі APA, Harvard, Vancouver, ISO та ін.

Malavialle, Philippe. "Infections virales en transplantation hépatique : à propos des 104 premiers greffés." Bordeaux 2, 1992. http://www.theses.fr/1992BOR23053.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kemble, Roger. "Urban design requirements, B. C. Place Vancouver, B. C." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26852.

Повний текст джерела

Анотація:

A new set of urban design requirements is proposed to replace the current urban design guidelines for the B. C. Place site in Vancouver, B. C. The site is 90.6 hectares of open area, contiguous to the downtown, it is the subject of extensive planning activities. The site has been chosen because it is free of most of the typical impediments that constrain urban planning in more congested areas of the city. Accordingly, a new way of expressing urban space is appropriate. To be valid urban design requirements must be conceived with a purpose in mind. The purpose, here, is the essential element of urban design, a shared vision of urban space. It must define, within a broad public consensus, a set of urban design requirements communicating, over an extended time period, a consistent vision of urban space. Six urban design requirements are set out to implement a shared vision of urban space. They have been reduced to a minimum to provide as much freedom of expression to the design professions as possible. They are under six headings: Interim Land Use, Site Development, Physical Form and Design, Environment, Occupancy, and Movement. Pivotal in the composition of the urban design requirements is an instrument called the Orthodox Surface Modulator, augmented by a Check List of architectural design elements. Together they become a metaphoric framework of reference, a part of the creative process within the development control system. The Orthodox Surface Modulator, as it is applied, describes the volumetric forms of building envelopes and the public urban spaces between buildings. It describes buildings and spaces to enhance public amenity. It may, under specific environmental circumstances, mitigate undesirable site conditions by describing building envelopes as buffer buildings, shielding passive urban space from noise and distractions. Urban Space is discussed. A Shared Vision of Urban Space, how it is evolved by public discourse, and a proposed Theory of Urban Space is explained. A critique of current urban development on Burrard Street, Vancouver, between Georgia Street and the waterfront explains why the present urban design guidelines, transfer of development rights and bonusing, have failed to produce the intended urban spatial amenity. Urban design requirements are not a new phenomenon. Only since the early 1970s have they taken on their present complex form in the City of Vancouver. A brief historic outline traces the antecedents of the proposed urban design requirements, placing them in context from early Greek attempts to rationalize optical distortion to the present day. The proposed application of the six urban design requirements and the Surface Modulator would be mandatory. The manner in which the elements of the Check List are integrated into the matrix of the Surface Modulator is proposed to be discretionary. The complete set of urban design requirements are intended to be used in a negotiating procedure common in planning practice.
Applied Science, Faculty of
Community and Regional Planning (SCARP), School of
Graduate

Стилі APA, Harvard, Vancouver, ISO та ін.

Parra, Gómez Cristián, and Díaz Braulio Cid. "C&B Servicios." Tesis, Universidad de Chile, 2016. http://repositorio.uchile.cl/handle/2250/143370.

Повний текст джерела

Анотація:

TESIS PARA OPTAR AL GRADO DE MAGÍSTER EN ADMINISTRACIÓN Cristián Parra Gómez [Parte I], Braulio Cid Díaz [Parte II]
En el barrio industrial de la bahía Mejillones existen algunas empresas de manufactura dedicadas esencialmente a generar productos para la minería del cobre de la segunda región (energía, explosivos, insumos y servicios), cuya operación se ve supeditada al cumplimiento de estrictos estándares ambientales: control de emisiones de riles, gases, material particulado, residuos sólidos, etc. En particular, el control de emisión de gases y material particulado se ha logrado a través de procesos y equipos específicos para esa tarea, cuya disponibilidad y confiabilidad se torna esencial para la sustentabilidad económica, social y ambiental de las empresas. Por otro lado, en la segunda región se encuentran las industrias de mayor tamaño del país: Codelco con las divisiones Chuquicamata, Radomiro Tomic, Gabriela Mistral y Ministro Hales; BHP Billiton con Minera Escondida, Glencore con Lomas Bayas, y Antofagasta Minerals con Antucoya, Centinela y Zaldívar, lo que ha atraído la presencia local de grandes empresas de servicios nacionales e internacionales con la intención de capturar parte del valor creado por las mencionadas industrias, en desmedro de las operaciones industriales de la bahía de Mejillones. Finalmente, y a pesar del explosivo desarrollo que ha vivido la comuna de Mejillones en los últimos quince años, no se ha desarrollado una industria de servicios capaz de atender las operaciones industriales de la bahía de Mejillones, básicamente por falta de preparación técnica y de administración. Considerando lo expuesto, se presenta la oportunidad para ofrecer a las industrias de la bahía de Mejillones servicios de mantenimiento e ingeniería para sus equipos de tratamiento de gases, oportunos y de alta calidad técnica, a objeto de asegurar la disponibilidad y confiabilidad de los mismos. Se presenta en este documento la descripción y evaluación a cinco años del proyecto de empresa “C&B Servicios”, cuyo resultado financiero para una inversión inicial de M$ 133.366 es un valor presente neto de M$ 309.956 (que incluye el valor terminal de M$ 885.713) con una tasa interna de retorno de 39%. Al quinto año, la rentabilidad esperada sobre el patrimonio es de 274%, con un valor de M$ 462.182.

Стилі APA, Harvard, Vancouver, ISO та ін.

Onyema, Ezenwa Chizimako Sunny. "Mechanism for synthesis of K* Arachno-C₂B₇H₁₂· from Arachno-4,5-C₂B₇H₁₃, and fluxional behavior of Nido-4,5-C₂B₆H₁₀." Click here for download, 2006. http://wwwlib.umi.com/cr/villanova/fullcit?p1434394.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Greiwe, Peter. "Synthese von Heterodiborolanen und Aufbau von nido-Hexaboranen mit den Gerüstatomen C 2 B 3 N, C 2 B 3 S und C 5 B." [S.l. : s.n.], 2000. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB8832639.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

STADLER, MICHAEL. "Proteines de la structure r b c c et transcription." Paris 7, 1999. http://www.theses.fr/1999PA077260.

Повний текст джерела

Анотація:

Les proteines r b c c sont caracterisees par la presence, de l'aminoterminus au carboxyterminus, des trois motifs ring, boite b et coiled coil. Le doigt de zinc du type ring (c 3hc 4) fait partie des interactions intermoleculaires dans des complexes multiproteiques et pourrait jouer un role dans leur assemblage ou stabilisation. Il est aussi responsable, en collaboration avec la boite b, de la localisation compartementalisee subcellulaire des proteines. Le doigt de zinc du type boite b (chc 3 - 4h 2) est implique dans des interactions proteine-proteines, par exemple dans la liaison de pml a rb1. Le domaine de dimerisation par helices hydrophobes (coiled coil) est une super-helice des helices et participe a la dimerisation, ensemble avec la boite b : le coiled coil comme surface d'interaction, la boite b peut-etre comme stabilisateur de l'orientation du coiled coil. Les trois domaines constituent le motif tripartie qui semble jouer un role fondamental dans l'adressage ou l'assemblage des macromolecules. Les membres les mieux etudies de cette famille multiproteique sont pml et les tif1. Pml est une proteine avec des capacites multiples de regulation : elle fait partie des complexes transcriptionnellement actifs, elle reprime (a travers l'apoptose) la croissance et la transformation, et elle controle des fonctions immunitaires, sous influence de l'acide retinoique et des interferons. Nous avons pu eclaircir le mecanisme moleculaire de l'induction transcriptionnelle de pml par les interferons avec l'identification d'elements fonctionnels de reponse aux interferons dans le promoteur de pml. Pml est fusionne au recepteur de l'acide retinoique, rar dans la translocation t(15 ; 17) specifiquement rencontree dans la vaste majorite

Стилі APA, Harvard, Vancouver, ISO та ін.

Eberling-Fux, Nicolas. "Matériaux composites à matrice nanostructurée dans les systèmes Si-B-C-Ti et Si-B-C-N." Bordeaux 1, 2006. http://www.theses.fr/2006BOR13235.

Повний текст джерела

Анотація:

Des matériaux composites à matrice céramique micro-nanostructurée et renfort fibreux en carbone ont été élaborés dans le système Si-B-C-X (X = Ti, N) par l'intermédiaire d'un nouveau procédé hybride alliant fiabilité, rapidité et minimisation des coûts. Ce dernier combine une étape d'imprégnation de préformes 3D (environ 2 mm d'épaisseur) à partir de suspensions de poudres céramiques nanométriques carbures et borures, suivie d'une étape de densification de la matrice pulvérulentes du composite. L'objectif repose sur la conception d'une matrice multiphasée amélirée présentant une ou des phases réfractaires, une phase borée assurant les mécanismes d'autocicatrisation dès 600°C et un phase déviatrice de fissures. Les applications envisagées sont aéronautiques pour un domaine de température de 600°C à 1100°C. Deux voies d'élaboration ont été explorées suivant la nature de la suspension initiale, à savoir des suspensions de poudres de carbure de silicium ou de carbure de titane dans lesquelles une poudre de carbure ou de nitrure de bore est ajoutée. Dans le cas de suspensions à base de poudres de SiC, le mélange de particules est dispersé dans un système suspensif à base d'éthanol et de polyéthylène imine. Les préformes avec ou sans interphase sont imprégnées à coeur de matériau et présentent des taux de remplissage compris entre 55 % et 70 % pour des temps d'exposition de 1 à 2 min. Ces dernières sont ensuite densifiées par frittage flash ou par infiltration réactive à partir de titane ou d'alliages fondus de manière à former respectivement des composites Cr / SiC - B4C ou SiC - BN, et des composites Cf / SiC(TIC) - TiB2 - Ti3SiC2. Le nitrure de bore et la phase ternaire Ti3SiC2 joue le rôle de fusible mécanique et d'interphase discrète au sein de la matrice composite. Dans le cas de suspensions à base de poudres de TiC, les particules sont préalablement soumises à un traitement acide en vue d'améliorer la dispersion du mélange de poudre dans le système éthanol + polyethylène imine. Présentant des taux d'imprégnation compris entre 50 % et 60 %, le matériau préimprégné est ensuite infiltré par du silicium ou un de ses alliages de manière à réaliser des composites à matrice SiC(TIC) - TiB2 - Ti3SiC2. L'ensemble des matériaux élaborés est caractérisé d'un point de vue morphologique, physico-chimique et mécanique. Des corrélations structure - propriétés sont établies.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "B.C.-105 B.C"

Sallust. Opere. Torino: Unione tipografico-editrice torinese, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

St. Margaret's School (Victoria, B.C), ed. Servite in caritate: The first 100 years of St. Margaret's School, 1908-2008. Victoria, B.C: St. Margaret's School, 2007.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wegman, William. A B C. New York: Hyperion, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wegman, William. A B C. New York: Hyperion, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Steig, William. C D B. New York: Simon & Schuster Books for Young Readers, 2000.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Belinda, Evans, ed. A B C. London: Collins Educational, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alberto, Blanco. A B C. México, D.F: Sistemas Técnicos, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chute, Douglas L. B/C powerlaboratory. Pacific Grove: Brooks/Cole Pub. Co., 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Filipek, Nina. A B C. Manchester: World International Publishing, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wegman, William. A B C. New York: Hyperion, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "B.C.-105 B.C"

Carow-Watamura, U., D. V. Louzguine, and A. Takeuchi. "B-C-Co (108)." In Landolt-Börnstein - Group III Condensed Matter, 40–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13850-8_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Carow-Watamura, U., D. V. Louzguine, and A. Takeuchi. "B-C-Fe (109)." In Landolt-Börnstein - Group III Condensed Matter, 42–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13850-8_9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Orbell, Sheina, Havah Schneider, Sabrina Esbitt, Jeffrey S. Gonzalez, Jeffrey S. Gonzalez, Erica Shreck, Abigail Batchelder, et al. "Hepatitis Types A, B, C." In Encyclopedia of Behavioral Medicine, 957–58. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4419-1005-9_201.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mayer, C., and W. Siems. "Weber A-, B- und C-Fraktur." In 100 Krankheitsbilder in der Physiotherapie, 214–17. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17267-0_22.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lightening, Martin. "C. J. Sansom (b. 1952), 2003: Dissolution." In 100 British Crime Writers, 413–14. London: Palgrave Macmillan UK, 2020. http://dx.doi.org/10.1057/978-1-137-31902-9_96.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Körner, Jürgen G. "Measuring the Chiralities of Weak b → c(u) Transitions in Exclusive B Meson Decays." In Heavy Flavours and High-Energy Collisions in the 1–100 TeV Range, 145–60. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-9981-0_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Elste, Martin. "Die Sonaten für Querflöte und Cembalo bzw. B. c. BWV 1030–1035." In Meilensteine der Bach-Interpretation 1750–2000, 311–12. Stuttgart: J.B. Metzler, 2000. http://dx.doi.org/10.1007/978-3-476-03792-3_32.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Урманчиева, А. Ю. "Система послелогов со значением ‘рядом’, ‘в направлении’, ‘напротив’ в северносамодийских языках и в прасеверносамодийском." In Siberica et Uralica, 95–125. Szeged: University of Szeged, 2022. http://dx.doi.org/10.14232/sua.2022.56.95-125.

Повний текст джерела

Анотація:

The paper concernes the formation in the Northern Samoyedic languages of a system of postpositions expressing the meaning of close proximity to a landmark or of movement towards a landmark / away from a landmark / along a landmark. In the Northern Samoyedic languages, this semantic sphere is quite detailed, distinguishing following meanings: A) ‘the action acciplishes near the landmark / starts in a place near the landmark / takes place near the landmark’ (e. g. near the house); B) ‘the action is directed towards the landmark / directed from the side of the landmark / takes place in the vicinity of the landmark’ (goes to the north; goes from the sea side). C) the action is performed in order to reach a landmark (goes to the house); D) the action implies a close contact between the object and the landmark; in this case the specific localization (‘inside’, ‘on the surface’, ‘on the side surface’) is not important (put it in the hand; wrote on the door); E) the action is performed, being localized in a certain way relative to a landmark (lies with feet to the door); F) the action is carried out strictly according to the course set by a landmark (follows the stars; points the knife at the pole); G) the action implies a “malefactive” contact of an object with a landmark (catched on the stone; cut his hand on the knife). These postpositions also developed a set of non-spatial uses: a) the formation of locative cases of personal pronouns; b) comitative meaning; c) the meaning of the equivalent ‘for the sake of something’, ‘in exchange for something’; d) the meaning of the topic (of messages, thoughts, etc.) ‘about something’. The paper reconstructs the development of the system of postpositions in each Northern Samoyedic language from Proto-Northern Samoyedic to the present state.

Стилі APA, Harvard, Vancouver, ISO та ін.

Alpay, Daniel, Maria Elena Luna-Elizarrarás, Michael Shapiro, and Daniele C. Struppa. "$$\mathbb B\mathbb C$$ B C -Modules." In SpringerBriefs in Mathematics, 31–36. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05110-9_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Louie, Steven G. "Theoretical Study of the Structure and Electronic Properties of Carbon and B X C Y N Z Nanotubes." In The Chemical Physics of Fullerenes 10 (and 5) Years Later, 419–35. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-015-8682-5_25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "B.C.-105 B.C"

Mercier-Ganady, Jonathan, Maud Marchal, and Anatole Lécuyer. "B-C-invisibility power." In AH '15: The 6th Augmented Human International Conference. New York, NY, USA: ACM, 2015. http://dx.doi.org/10.1145/2735711.2735835.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hall, SB, SC Biswas, and SB Rananavare. "SP-B and SP-C Stabilize Saddle-Shaped Phospholipid Structures." In American Thoracic Society 2009 International Conference, May 15-20, 2009 • San Diego, California. American Thoracic Society, 2009. http://dx.doi.org/10.1164/ajrccm-conference.2009.179.1_meetingabstracts.a6276.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Merkuleva, Yu A., E. A. Kolosova, and D. N. Shcherbakov. "RECOMBINANT VECTOR PBSU PROVIDES A HIGH LEVEL OF EXPRESSION OF B. THURINGIENSIS PHOSPHOLIPASE C IN B. MOJAVENSIS CELLS." In X Международная конференция молодых ученых: биоинформатиков, биотехнологов, биофизиков, вирусологов и молекулярных биологов — 2023. Novosibirsk State University, 2023. http://dx.doi.org/10.25205/978-5-4437-1526-1-103.

Повний текст джерела

Анотація:

A recombinant plasmid pBSU-PLC containing the B. thuringiensis phospholipase C gene has been developed. Expression of the target genes in this vector is under the control of the strong synthetic Pgrac promoter. B. mojavensis cells were transformed with the resulting recombinant plasmid. The obtained recombinant strain was used for experimental production of recombinant B. thuringiensis phospholipase C in the pilot cycle of cultivation. As a result of the fermentation cycle, with successive transfer from a 15-liter fermenter to a 250-liter one, an enzyme was obtained with high activity after 13 hours of cultivation.

Стилі APA, Harvard, Vancouver, ISO та ін.

"ВЛИЯНИЕ ВЫСОКОЭНЕРГЕТИЧЕСКОЙ ОБРАБОТКИ НА СТРУКТУРНОФАЗОВОЕ СОСТОЯНИЕ ПОРОШКОВЫХ СИСТЕМ Zrx(B, C)y". У Физическая мезомеханика. Материалы с многоуровневой иерархически организованной структурой и интеллектуальные производственные технологии. Издательство ТГУ, 2021. http://dx.doi.org/10.17223/978-5-907442-03-0-2021-135.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

MARIANA, MARDARESCU, UNGURIANU RODICA, and POPESCU ANCA. "P267 Newborn infected with hiv, virus c, virus b, cmv – case presentation." In 8th Europaediatrics Congress jointly held with, The 13th National Congress of Romanian Pediatrics Society, 7–10 June 2017, Palace of Parliament, Romania, Paediatrics building bridges across Europe. BMJ Publishing Group Ltd and Royal College of Paediatrics and Child Health, 2017. http://dx.doi.org/10.1136/archdischild-2017-313273.355.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ehlert, Jan E., Bettina Mutschler, Melanie Mueller, Andreas Lingnau, Steffen Hoffmann, Holger Weber, and Michael H. G. Kubbutat. "Abstract 1554: Inducible B-Raf and c-Src models as tools for drug development." In Proceedings: AACR 104th Annual Meeting 2013; Apr 6-10, 2013; Washington, DC. American Association for Cancer Research, 2013. http://dx.doi.org/10.1158/1538-7445.am2013-1554.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Qiang, Shan Zhong, and Lin Li. "Reduction of Pressure Losses in a Linear Cascade Using Herringbone Riblets." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63960.

Повний текст джерела

Анотація:

This paper presents the results from the first experimental assessment of herringbone riblets in reducing total pressure losses in a linear cascade of diffuser blades. The experiments were undertaken at Re = 1 × 105, M = 0.13 and a free stream turbulent intensity of 2%. Three cascade configurations were examined at a blade incidence angle of 0.8°; Case A: the baseline case without surface modification; Case B: blades with smooth strips; Case C: blades with ribleted strips. In Case A, flow separation starts at 24.1%c from the blade leading edge followed by a complete stall, resulting in significant total pressure losses as measured by a five-hole probe on a cross-flow plane downstream. Seven smooth or ribleted strips were adhered on the blade suction surfaces along their span in Case B and Case C. In comparison to Case A, the average total pressure loss coefficient is decreased by 6.4% and 16.8% in Case B and Case C, respectively. The velocity vectors leaving the cross-flow measurement plane also appear to be more uniformly distributed with the average flow turning angle being increased by 4° and 10° in Case B and Case C respectively, indicating that the extent of flow separation in the cascade has been reduced substantially. Furthermore, a pseudo sound power analysis of hot-wire data in the blade wake reveals a reduction in the noise level of 1.1dB and 1.6 dB, respectively. These results hence provide strong evidence that a profound aerodynamic improvement can be achieved in a cascade with the use of herringbone riblets.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ross, Julie, René Winkler, Charles Vadnais, Marissa Rashkovan, Christian Kosan, and Tarik Möröy. "Abstract B08: Loss of functional Miz-1 impairs c-Myc-dependent B cell lymphomagenesis." In Abstracts: AACR Special Conference on Myc: From Biology to Therapy; January 7-10, 2015; La Jolla, CA. American Association for Cancer Research, 2015. http://dx.doi.org/10.1158/1557-3125.myc15-b08.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Leslie, K., J. J. Yeh, and C. Whelen. "Thermal lensing characterizations of a- and c-axes alexandrite laser rods." In International Laser Science Conference. Washington, D.C.: Optica Publishing Group, 1986. http://dx.doi.org/10.1364/ils.1986.thh4.

Повний текст джерела

Анотація:

We have measured the thermal lensing characteristics of a- and c-axes alexandrite laser rods using a diode laser operating at 790 nm as a probe and polarization parallel and perpendicular to the b-axis. In the case of c-axis rods, significant differences between the two polarization directions were found. While the average thermal lensing rates are comparable, the thermally induced lensing is much less astigmatic for beams polarized parallel to the b-axis than for those along the a-axis. For a-axis rods, the average lensing rate is 28% less than those of the c-axis but it is more astigmatic when the probe beam is polarized along the b-axis. The thermally induced nonspherical aberrations were also measured by passing probe beams at different radial locations. Similar to the average lensing rate, the a-axis rod was found to have much fewer nonspherical aberrations than the c-axis. The results provide explanations to the resonator stability conditions of the LANL 100-W laser. The results also provide guidelines to the proper choice of alexandrite laser rods for different performance requirements. A theoretical explanation of the observations based on crystal symmetry is discussed. The experimental techniques employed are presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

Manca, Oronzio, Biagio Morrone, Sergio Nardini, and Salvatore Savarese. "Experimental Analysis of Thermal Instability in Natural Convection Inside Open-Ended Cavities With Uniform Heat Flux on Horizontal Walls." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0920.

Повний текст джерела

Анотація:

Abstract An experimental investigation of air natural convection between heated parallel plates has been carried out by the visualization of the flow and the measurement of air temperature. Grashof numbers, based on the gap between the plates and the longitudinal aspect ratio (L/b), varied in the 3.8·102–1.1·105 range. The investigated distance between the plates, b, were 20.00, 32.25 and 40.00 mm, corresponding to aspect ratios L/b of 20, 12.4 and 10 and plate width/gap between the plates ratio of 22.5, 14 and 11.25. The Ohmic heat fluxes have been changed in the 60–240 W/m2 range. Furthermore, three heating modes have been tested in order to analyze their peculiar patterns and the onset of secondary motions. The typical main flow pattern resembles a C shape (C-loop). In fact, the flow penetrates inside the channel close to the leading edge of the lower plate and exits from the upper part, by reversing its motion inside the channel. The flow visualization shows that secondary flows add to the C-loop main flow, when the lower plate is heated. Such secondary structures start in the form of thermals and, then, they change into longitudinal vortex, whereas in the upper region of the open-ended cavity a chaotic motion is detected. The existence of these structures is confirmed by the measurement of istantaneous temperature values. They show that the greater the Grashof number the more chaotic the turbulent flow in the outflow region of the C-loop, when the lower plate is heated and the upper plate is unheated.

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "B.C.-105 B.C"

R.W. Ovink. 100-B/C Target Analyte List Development for Soil. Office of Scientific and Technical Information (OSTI), March 2010. http://dx.doi.org/10.2172/1017507.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bergstrom, K. A., and J. W. Fassett. Geophysical investigations of French Drain 116-B-9, and Dry Well 116-B-10, 100 B/C Area. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/10169939.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Geeting, J. G. H., and B. A. Reynolds. Bench-scale crossflow filtration of Hanford tank C-106, C-107, B-110, and U-110 sludge slurries. Office of Scientific and Technical Information (OSTI), September 1997. http://dx.doi.org/10.2172/552800.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mccormick, W. A. ,. Westinghouse Hanford. Documentation and analysis for packaging for the 100 B/C Packagings. Office of Scientific and Technical Information (OSTI), July 1996. http://dx.doi.org/10.2172/659259.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kiss, F. Residual total magnetic field, aeromagnetic survey of the Wolf Lake area, Yukon, parts of NTS 105-B (south half) and 105-C (south half). Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2019. http://dx.doi.org/10.4095/314837.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ewalt, J. R. Type B Investigation Report for 241-SY-101 Pump Start and 241-C-106 Pit Cleanout. Office of Scientific and Technical Information (OSTI), September 1993. http://dx.doi.org/10.2172/10139533.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

J. M. Capron. Remaining Sites Verification Package for the 100-B-23, 100-B/C Area Surface Debris, Waste Site, Waste Site Reclassification Form 2008-027. Office of Scientific and Technical Information (OSTI), June 2008. http://dx.doi.org/10.2172/944193.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Matysek, P. F., S. J. Day, J. L. Gravel, and W. Jackaman. Regional stream sediment and water geochemical reconnaissance data, Iskut River (104 B, part of 104 C). Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1988. http://dx.doi.org/10.4095/130509.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kiss, F. First vertical derivative of the magnetic field, aeromagnetic survey of the Wolf Lake area, Yukon, parts of NTS 105-B (south half) and 105-C (south half). Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2019. http://dx.doi.org/10.4095/314838.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

J. M. Capron. Remaining Sites Verification Package for the 100-B-21:2 Subsite (100-B/C Discovery Pipeline DS-100BC-002), Waste Site Reclassification Form 2008-003. Office of Scientific and Technical Information (OSTI), June 2008. http://dx.doi.org/10.2172/944192.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!