Увійти

Готові списки джерел за темами / Balancing tools / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Balancing tools.

Статті в журналах з теми "Balancing tools"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Balancing tools".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

SMIRNOV, Valerii V. "Balancing Russia's finances." Finance and Credit 30, no. 2 (2024): 269–88. http://dx.doi.org/10.24891/fc.30.2.269.

Повний текст джерела

Анотація:

Subject. This article discusses the issues of balancing Russian finances. Objectives. The article aims to identify tools for balancing Russian finances. Methods. For the study, I used a systems approach based on a statistical analysis. Results. The article describes the main tools for balancing Russian finances. It also identifies additional tools for balancing Russia's finances. Conclusions. The main instruments for balancing Russian finances are the monetary base, debt securities and the key interest rate of the Bank of Russia, and listed shares of Russian issuers are an additional instrumen

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Bushinskaya, T. V. "TOOLS TO BALANCE SUB-FEDERAL BUDGETS." Bulletin of Udmurt University. Series Economics and Law 32, no. 4 (2022): 603–8. http://dx.doi.org/10.35634/2412-9593-2022-32-4-603-608.

Повний текст джерела

Анотація:

The article considers the issues of balancing the sub-federal budget as an integral part of the budget system of the federal state. The Budget Code of the Russian Federation establishes the principle of balance, which enshrines the obligation to adopt a deficit-free budget and, if necessary, to determine the volume and sources of financing its deficit. However, a serious methodological and organisational problem is balancing the budget at the stage of implementation. The high degree of centralisation of fiscal powers in the federal centre, limited influence on the composition of sub-federal bu

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Tharakath, Anas. "Developing of Balancing Tools for Flight Controls." Automation, Control and Intelligent Systems 5, no. 6 (2017): 92. http://dx.doi.org/10.11648/j.acis.20170506.12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Halima, Anouar Ben, and Hafssa Benaboud. "Challenges of load balancing algorithms in cloud computing utilizing data mining tools." International Journal of Electrical and Computer Engineering (IJECE) 15, no. 3 (2025): 3449. https://doi.org/10.11591/ijece.v15i3.pp3449-3457.

Повний текст джерела

Анотація:

In the cloud computing environment, load balancing plays an important role in the efficient operation of cloud computing, where a multitude of resources serve diverse workloads and fluctuating demands. In the rapidly evolving cloud computing, efficient resource management, and optimization are critical for maximizing performance, scalability, and cost-effectiveness. Load balancing algorithms aim to distribute workloads across cloud resources to ensure optimal utilization and maintain high availability of services. This paper presents a comparative study of load balancing algorithms in cloud co

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Prodan, Dan, Anca Bucuresteanu, Emilia Balan, and Adrian Motomancea. "Theoretical and Experimental Researches on the Balancing Systems of Machine-Tools Feed Kinematic Chains." Applied Mechanics and Materials 555 (June 2014): 497–504. http://dx.doi.org/10.4028/www.scientific.net/amm.555.497.

Повний текст джерела

Анотація:

In this paper, the authors present some of the theoretical and experimental researches conducted in recent years in the field of large masses shifted vertically. The paper starts with a technical-economical comparative analysis of the hydraulic and mechanical balancing. The following are the most commonly used systems of hydraulic balancing for modern machine-tools, the CNC ones especially. Finally the paper presents some of the experimental achievements materialized in hydraulic balancing units for machine-tools.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Liang, Yihe. "Balancing: The Effects of AI Tools in Educational Context." Frontiers in Humanities and Social Sciences 3, no. 8 (2023): 7–10. http://dx.doi.org/10.54691/fhss.v3i8.5531.

Повний текст джерела

Анотація:

The use of AI tools in educational contexts, and particularly in higher education, has been associated with both positive and negative effects. While AI tools can help students with their writing, they can also lead to the loss of creativity and moral issues. To balance the effects of AI tools, this paper presents two solutions. One, universities should adjust their assessment methods to focus on developing students' creativity and critical thinking. Next, the universities should offer AI literacy programs to teach students how to use AI tools properly. By balancing the strengths and weaknesse

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Schulz, H., and T. Würz. "Balancing Requirements for Fast Rotating Tools and Spindle Systems." CIRP Annals 47, no. 1 (1998): 321–24. http://dx.doi.org/10.1016/s0007-8506(07)62842-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Contreras, Felipe, Nancy Hitschfeld-Kahler, Marı´a Cecilia Bastarrica, and Carlos Lillo. "Balancing flexibility and performance in three dimensional meshing tools." Advances in Engineering Software 41, no. 3 (2010): 471–79. http://dx.doi.org/10.1016/j.advengsoft.2009.10.005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Oborskyi, H., A. Orgiyan, and A. Balaniuk. "BALANCING SPINDLES WITH TOOLS FOR FINISHING AND BORING MACHINES." Odes’kyi Politechnichnyi Universytet Pratsi 1, no. 67 (2023): 5–13. http://dx.doi.org/10.15276/opu.1.67.2023.01.

Повний текст джерела

Анотація:

Finishing and boring machines are used in serial and mass production for processing parts of various shapes and deformation properties, namely liners, connecting rods, pistons, flanges, couplings, as well as body parts such as crankcases, blocks, cylinders, etc. Bridges are installed on the bed of horizontal boring machines, on which spindle units are fixed. The decisive influence on the accuracy of processing is exerted by the parameters of the spindle assembly with the tool and the fixture with the part. The use of modern tool materials makes it necessary to increase the speed of spindle uni

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Chitra, P., Karthika D. Renuka, K. Senathipathi, S. Deepika, and R. Geethamani. "A Survey on Load Balancing Algorithms for Cloud Environment." Journal of Computational and Theoretical Nanoscience 16, no. 2 (2019): 764–67. http://dx.doi.org/10.1166/jctn.2019.7806.

Повний текст джерела

Анотація:

Cloud computing is the cutting edge technology in the information field to provide services to the users over the internet through web–based tools and applications. One of the major aspects of cloud computing is load balancing. Challenges like Quality of service (QoS) metrics and resource utilization can be improved by balancing the load in cloud environment. Specific scheduling criteria can be applied using load balancing for users prioritization. This paper surveys different load balancing algorithms. The approaches that are existing are discussed and analyzed to provide fair load balancing

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Sahibgareeva, Gulnara Faritovna, Vlada Vladimirovna Kugurakova, and Eduard Sergeevich Bolshakov. "Game Balance Tools." Russian Digital Libraries Journal 26, no. 2 (2023): 225–51. https://doi.org/10.26907/1562-5419-2023-26-2-225-251.

Повний текст джерела

Анотація:

To disclose the concept of game balance and to develop an approach to automate the routine when working with game economics, methods of data analysis and experimentation were applied. According to the results of the analysis of existing definitions, a special case of mathematical balance and a generalized design definition of game balance were singled out. By parsing the existing approaches for balancing and testing games, a vision of our own solution was developed. Based on the findings, an approach for automating balance within a game prototype generator has been proposed. As an intermediate

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Babazadeh, Sina. "The relevance of ligament balancing in total knee arthroplasty: how important is it? A systematic review of the literature." Orthopedic Reviews 1, no. 1 (2009): 26. http://dx.doi.org/10.4081/or.2009.e26.

Повний текст джерела

Анотація:

Ligament balancing affects many of the postoperative criteria for a successful knee replacement. A balanced knee contributes to improved alignment and stability. Ligament balancing helps reduce wear and loosening of the joint. A patient with a balanced knee is more likely to have increased range of motion and proprioception, and decreased pain. All these factors help minimize the need for revision surgery. Complications associated with ligament balancing can include instability caused by over-balancing and the possibility of neurovascular damage during or as a result of ligament balancing. Thi

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Chan, Chi On, and Huay Ling Tay. "Combining lean tools application in kaizen: a field study on the printing industry." International Journal of Productivity and Performance Management 67, no. 1 (2018): 45–65. http://dx.doi.org/10.1108/ijppm-09-2016-0197.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to highlight the lessons learned from two kaizen events for productivity improvement in a printing company. The paper suggests how to organize lean tools to improve productivity through the use of organized kaizen events in the printing industry to meet defined targets. Design/methodology/approach This paper is based on a field study involving participant observations. The relationships among the three specific tools, line balancing, standardized work and standardized layout that are used in a kaizen event of a printing factory, are examined. Findings Appli

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Karami, Hamed, Pejman Sanaei, and Alexandra Smirnova. "Balancing mitigation strategies for viral outbreaks." Mathematical Biosciences and Engineering 21, no. 12 (2024): 7650–87. https://doi.org/10.3934/mbe.2024337.

Повний текст джерела

Анотація:

<p>Control and prevention strategies are indispensable tools for managing the spread of infectious diseases. This paper examined biological models for the post-vaccination stage of a viral outbreak that integrate two important mitigation tools: social distancing, aimed at reducing the disease transmission rate, and vaccination, which boosts the immune system. Five different scenarios of epidemic progression were considered: (ⅰ) the "no control" scenario, reflecting the natural evolution of a disease without any safety measures in place, (ⅱ) the "reconstructed" scenario, representing real

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Chandra, Prakash Singh. "AI-Driven Code Review: Balancing Automation with Developer Autonomy." International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences 13, no. 1 (2025): 1–4. https://doi.org/10.5281/zenodo.14615572.

Повний текст джерела

Анотація:

The use of AI-driven tools in software development has revolutionized tasks such as code generation, debugging, and performance optimization. Large language models (LLMs) like ChatGPT, GitHub Copilot, and Codeium provide developers with robust assistance, streamlining the coding process. However, understanding their strengths and limitations remains a critical area of study. This paper evaluates these tools' performance on LeetCode challenges across varying difficulty levels, analyzing success rates, runtime efficiency, memory usage, and error-handling capabilities. GitHub Copilot excelled in

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Shanmugapriya, S., and N. Priya. "Examination of Cloud Simulation Platforms and Implementation of Load Balancing in CloudAnalyst." Indian Journal Of Science And Technology 17, no. 33 (2024): 3424–36. http://dx.doi.org/10.17485/ijst/v17i33.1751.

Повний текст джерела

Анотація:

Objectives: In light of the growing number of open-source simulation tools for load balancing in cloud computing, the objective of this research is to assess some of the most significant tools before selecting the best one depending on the requirements and goals of the research and also implementing the load balancing approach in the CloudAnalyst tool for dynamic workload (HTTP request) allocation and virtual machine selection in the Infrastructure as a Service (IaaS) heterogeneous cloud environment, with the aim of minimizing the searching time, improving the response time and datacenter proc

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Canilho, Paulo, Ignacio Reguero, and Pablo Saiz. "Achieving metric oriented load balancing." EPJ Web of Conferences 245 (2020): 07004. http://dx.doi.org/10.1051/epjconf/202024507004.

Повний текст джерела

Анотація:

The Load Balance Service at CERN handles more than 500 aliases, distributed over more than 2000 nodes. After being in production for more than fifteen years, it has been going through a major redesign over the last two years. Last year, the server part was reimplemented in the Go Programming Language, taking advantage of its concurrency features to improve the scaling of the system. This year, the client side has been the main focus. This article describes the client side and its configuration, including the tools used at CERN. All the components used by the Load Balance Service are open sourc

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Nakamoto, Keiichi, Shinya Mitsuhashi, Kazuhiko Adachi, and Keiichi Shirase. "A Machine Tool Spindle Achieving Real-Time Balancing Using Magnetic Fluid." International Journal of Automation Technology 3, no. 2 (2009): 193–98. http://dx.doi.org/10.20965/ijat.2009.p0193.

Повний текст джерела

Анотація:

A machine tool spindle is a key component affecting the performance of machine tools. Spindle vibration of machine tools causes tool wear prematurely and decreases machining accuracy. The vibration changes depending on the used tooling and the rotation speed during various machining operations. In particular, even small unbalance mass of the spindle makes large whirl in high speed machining. However, real-time balancing of a machine tool spindle has not yet been realized successfully including the influence of the used tooling. In this study, in order to reduce unbalance response of a machine

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Sushkevych, Olha. "DIGITAL TOOLS AND TRADITIONAL MEANS FOR STORYTELLING: BALANCING IN THE ESL CLASSROOM." Deutsche internationale Zeitschrift für zeitgenössische Wissenschaft 73 (February 3, 2024): 33–35. https://doi.org/10.5281/zenodo.10613478.

Повний текст джерела

Анотація:

The text discusses the fundamental role of storytelling in education and highlights the evolution of storytelling techniques from traditional to digital methods. It emphasizes the need for a balanced approach that combines digital tools with traditional linguistic and extra-linguistic means. The author proposes a model that incorporates the use of five human senses for storytelling, presenting an illustration of sensory experience aspects. The author advocates for a strategic application of digital tools, with traditional methods used during the preparatory stages of s

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Kiran, Noolvi, Nallamalli Swetha, Godasu Apoorva, and Sai Krishna Mohan Pitchikala Naga. "Load Balancing using OpenDaylight Controller." INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH AND CREATIVE TECHNOLOGY 6, no. 6 (2020): 1–6. https://doi.org/10.5281/zenodo.13950015.

Повний текст джерела

Анотація:

In this study, we focused on setting up load balancers and improving load balancing in a network that uses a Fat Tree design using Open Daylight system. We built the network using tools like Mininet and Instant Virtual Network (IVN). Open Daylight, which is an open-source controller for software-defined networks (SDN), was used to manage and control the traffic flow in the network. To test the network, we created traffic using a tool called IPERF and measured key factors like bandwidth, delay (latency), and overall network performance. The aim of this research is to study how the traffic flows

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Yadav, Ashish, Ramawatar Kulhary, Rupesh Nishad, and Sunil Agrawal. "Parallel two-sided assembly line balancing with tools and tasks sharing." Assembly Automation 40, no. 6 (2019): 833–46. http://dx.doi.org/10.1108/aa-02-2018-025.

Повний текст джерела

Анотація:

Purpose Parallel two-sided assembly lines are usually designed to produce large-sized products such as trucks and buses. In parallel two-sided assembly lines, both left and right sides of the line are used for manufacturing one or more products on two or more assembly lines located parallel to each other. The purpose of this paper is to develop a new mathematical model for the parallel two-sided assembly line balancing problem that helps to evaluate and validate the balancing operations of the machines such as removal of tools and fixtures and reallocating the operators. Design/methodology/app

Стилі APA, Harvard, Vancouver, ISO та ін.

22

S, Shanmugapriya, and Priya N. "Examination of Cloud Simulation Platforms and Implementation of Load Balancing in CloudAnalyst." Indian Journal of Science and Technology 17, no. 33 (2024): 3424–36. https://doi.org/10.17485/IJST/v17i33.1751.

Повний текст джерела

Анотація:

Abstract <strong>Objectives:</strong> In light of the growing number of open-source simulation tools for load balancing in cloud computing, the objective of this research is to assess some of the most significant tools before selecting the best one depending on the requirements and goals of the research and also implementing the load balancing approach in the CloudAnalyst tool for dynamic workload (HTTP request) allocation and virtual machine selection in the Infrastructure as a Service (IaaS) heterogeneous cloud environment, with the aim of minimizing the searching time, improving the re

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Bašovská, Klaudia, and Jozef Peterka. "Influence of Tool Balancing in High Speed Machining." ACTA Universitatis Cibiniensis 65, no. 1 (2014): 7–12. http://dx.doi.org/10.1515/aucts-2015-0002.

Повний текст джерела

Анотація:

Abstract The high speed machining (HSM) is now considered as one of the key manufacturing technologies for higher throughput and productivity. HSM used higher rotational speed of the spindle (40,000 min-1 and higher). With increasing high speed spindle rotations raises a number of dynamic forces. Even a small mass unbalance in the spindle and tooling generates tool vibration. Tool vibration shortens tool life and lowers the quality of the machined surface. It is necessary to minimize this vibration by balancing tool and tool holder. The balancing process improves the mass distribution of a cut

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Rajak, Ranjit, Anjali Choudhary, and Mohammad Sajid. "Load balancing techniques in cloud platform: A systematic study." International Journal of Experimental Research and Review 30 (April 30, 2023): 15–24. http://dx.doi.org/10.52756/ijerr.2023.v30.002.

Повний текст джерела

Анотація:

In the current scenario, researchers have made a new invention and added to the computing paradigm every next second. Cloud computing is one of the most demanding, practical, accessible and extended technologies based on ‘pay as per use model’ and works on virtualisation via internet. Data sharing and accessing have become easy by properly organising various resources, such as storage, servers, development tools, software, etc, in cloud. Handling these resources has faced many challenges, such as cost management, system performance, migration, load imbalance, reliability and privacy etc. Load

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Denisov, O. V. "Discrete-event simulation of load distribution between server stations." Journal of Physics: Conference Series 2182, no. 1 (2022): 012018. http://dx.doi.org/10.1088/1742-6596/2182/1/012018.

Повний текст джерела

Анотація:

Abstract The simulation model of the computational load balancing in a server complex using a balancing server is proposed. The server load balancing model was developed using MATLAB/Simulink/SimEvents/Stateflow tools. The SimEvents based model makes it possible to simulate the server complex as a queuing system and to take into account the sporadic occurrence of requests. The Stateflow based event-driven model simulates the system with a variable time delay in data transmission channels and simulates state transitions for servers. This discrete-event simulation model allows evaluating the pos

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Shinde, Ms. Cynthia Nitin. "AI-Driven Education: Balancing Cognitive Enhancement and Creative Thinking." International Journal of Advance and Applied Research 6, no. 25 (2025): 188–92. https://doi.org/10.5281/zenodo.15295061.

Повний текст джерела

Анотація:

<strong>Abstract:</strong> Technology is climbing the ladder of rapid advancement, and at its core lies artificial intelligence, a transformative force reshaping industries and redefining human potential. In the realm of education, AI-driven tools are emerging as game changers, offering personalized learning experiences, instant feedback, and adaptive teaching methodologies. With AI seamlessly integrated into classrooms, students can access information effortlessly, sharpen problem-solving skills, and cultivate critical thinking. However, as AI becomes a silent tutor in students' academic jour

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Sydoruk, Borys. "Formation of management tools for balanced use of agricultural land." Economic discourse, no. 2 (June 2019): 54–64. http://dx.doi.org/10.36742/2410-0919-2019-2-5.

Повний текст джерела

Анотація:

Introduction. An important role is played by the use of a wide range of tools and levers of influence at different levels of government in the theory and practice of agricultural activities to ensure a balanced use of land resources. Therefore, it is relevant at the present stage of management to study the features of the formation of management system in the field of land use to ensure a balanced use of agricultural land. Methods. Research conducted by use of the dialectical method of knowledge of the economic laws and systematic approach to the study of economic phenomena and processes, mono

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Barr, Jayne. "Balancing Innovation and Safety When Integrating Digital Tools Into Health Care." Annals of Internal Medicine 169, no. 8 (2018): 591. http://dx.doi.org/10.7326/l18-0408.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Auerbach, Andrew D., Aaron Neinstein, and Raman Khanna. "Balancing Innovation and Safety When Integrating Digital Tools Into Health Care." Annals of Internal Medicine 169, no. 8 (2018): 592. http://dx.doi.org/10.7326/l18-0409.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Auerbach, Andrew D., Aaron Neinstein, and Raman Khanna. "Balancing Innovation and Safety When Integrating Digital Tools Into Health Care." Annals of Internal Medicine 168, no. 10 (2018): 733. http://dx.doi.org/10.7326/m17-3108.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Hombal, Kaveri T., and Anjan K. Koundinya. "A DEEP DIVE INTO LOAD BALANCING TOOLS FOR HADOOP APPLICATION MANAGEMENT." International Journal of Engineering Applied Sciences and Technology 04, no. 08 (2019): 119–22. http://dx.doi.org/10.33564/ijeast.2019.v04i08.018.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Prodan, Dan, Anca Bucuresteanu, Tiberiu Dobrescu, and Adrian Motomancea. "Mathematical Models on the Closed Circuit Balancing Systems in Machine Tools." Applied Mechanics and Materials 859 (December 2016): 170–76. http://dx.doi.org/10.4028/www.scientific.net/amm.859.170.

Повний текст джерела

Анотація:

In this paper we make a comparison between the most common balancing systems used in heavy duty machine tools and especially in CNC type ones. We introduce the systems with reducing valves, pumps with pressure regulator and the systems with accumulators assembled in closed circuit. For the latter we present calculation models used during operation under adiabatic transformations (operating times of seconds) or under isothermal transformations (operating times of minutes). There are also presented applications of these models for a gantry type milling machine and an AF type machine.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Ковалева, М. В., and И. В. Кулаков. "Practical tools for balancing the budget of the city of Khabarovsk." Экономика и предпринимательство, no. 4(141) (July 11, 2022): 629–38. http://dx.doi.org/10.34925/eip.2022.141.4.114.

Повний текст джерела

Анотація:

В статье рассматривается актуальный в настоящее время комплекс вопросов, связанных с повышением уровня сбалансированности бюджетов и управлением расходами муниципальных бюджетов в современных условиях. Выполнена оценка сбалансированности бюджета города Хабаровска, рассмотрены инструментам обеспечения сбалансированности в рамках бюджетного процесса. Проведенный анализ позволяет рассматривать сбалансированность бюджета города Хабаровска не только как статистическую величину, но и как результат бюджетных потоков в бюджетном процессе. The article deals with the currently relevant complex of issues

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Saeid, Sahand, and Tara Ali Yahiya. "Load Balancing Evaluation Tools for a Private Cloud: A Comparative Study." ARO-The Scientific Journal of Koya University 6, no. 2 (2018): 13–19. http://dx.doi.org/10.14500/aro.10438.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Scheurer, Robert P., and Kenneth J. Kepchar. "Balancing Requirements and the Product A Process and Tools Case Study." INCOSE International Symposium 7, no. 1 (1997): 258–65. http://dx.doi.org/10.1002/j.2334-5837.1997.tb02180.x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Naceanceno, Kendall. "BACKTALK: Balancing new technologies with proven instructional strategies." Phi Delta Kappan 106, no. 7-8 (2025): 68–70. https://doi.org/10.1177/00317217251342374.

Повний текст джерела

Анотація:

While digital tools have enhanced efficiency for teachers and created unique classroom opportunities, they can sometimes overshadow foundational strategies like direct instruction. Kendall Naceanceno draws on his teaching experiences and professional discussions to propose practical methods to integrate technology with essential instructional practices. He advocates for thoughtful, intentional technology use that complements, rather than undermines, effective teaching and learning.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Babets, Iryna, and Mariya Fleychuk. "MARKETING TOOLS FOR INTERNATIONAL TOURISM FLOWS BALANCING: EXPERIENCE OF UKRAINE AND POLAND." Economics & Education 6, no. 2 (2021): 29–36. http://dx.doi.org/10.30525/2500-946x/2021-2-5.

Повний текст джерела

Анотація:

The article provides a comparative analysis of trends in domestic and foreign tourism in Ukraine and Poland during the COVID-19 pandemic. The main directions and tools of marketing policy of balancing tourist flows for socio-economic development of the researched countries are analyzed. The main subject of the research is marketing tools for balancing international tourist flows in the investigated countries, taking into account the experience of other countries in which the field of tourism is developed. The research methodology provides for the analysis of the dynamics of tourist flows in Po

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Deer, Shannon, and Jill Zarestky. "Balancing Profit and People: Corporate Social Responsibility in Business Education." Journal of Management Education 41, no. 5 (2017): 727–49. http://dx.doi.org/10.1177/1052562917719918.

Повний текст джерела

Анотація:

This qualitative study’s purpose was to evaluate how undergraduate business students’ perspectives, skills, and behaviors evolved through corporate social responsibility (CSR) education taught with a focus on critical thinking and sustainable problem solving. Business schools are struggling to incorporate CSR into their curriculum despite interest from students and pressure from accreditation agencies. This article primarily contributes practical tools for business schools teaching students to apply critical thinking skills and concepts gained through their business education to develop soluti

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Mariucci, Brielle, Isabelle Bradberry, and Meera Rothman. "Balancing Human-Centred Design with Product Management." Touchpoint 16, no. 1 (2025): 40–43. https://doi.org/10.30819/touchpoint.16-1.08.

Повний текст джерела

Анотація:

Public services affect the lives of nearly everyone, from getting a birth certificate to renewing a driver’s license to accessing retirement benefits. Despite their importance and ubiquity, however, public services can be exhausting to navigate. This is a challenge we tackle at the Public Policy Lab (PPL), a New York City-based nonprofit organisation that partners with US government agencies to improve public services. While our work applies service design to policymaking to improve users’ experiences, we also design the tools and products – from paper forms to digital platforms – that governm

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Fan, Hongwei, Jin Wang, Sijie Shao, Minqing Jing, Heng Liu, and Xuhui Zhang. "A Corrected Adaptive Balancing Approach of Motorized Spindle Considering Air Gap Unbalance." Applied Sciences 10, no. 6 (2020): 2197. http://dx.doi.org/10.3390/app10062197.

Повний текст джерела

Анотація:

Motorized spindles widely used for high-speed precision machine tools are very sensitive to the mass unbalance of rotors; thus, their balancing problem is always a research hotspot. Although many significant studies were done regarding the theory and application of various rotor balancing technologies for motorized spindles, the particularity of motorized spindles is not carefully considered in the existing balancing approaches. When the rotor unbalance of a motorized spindle occurs in operation, it is subject to both the mass unbalance-induced inertia force and air gap unbalance-induced elect

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Leonov, A. V., and A. Yu Pronin. "Analyzing the balancing problem at the stages of creating high-tech products." National Interests: Priorities and Security 16, no. 4 (2020): 695–714. http://dx.doi.org/10.24891/ni.16.4.695.

Повний текст джерела

Анотація:

Subject. The most important and responsible stage of justifying State programs for high-tech product creation is the balancing of program activities. This task becomes especially urgent when fulfilling the customer requirements for efficiency and quality of high-tech products under tight constraints on fund allocation. Objectives. The study aims to create a general balancing model based on a comprehensive analysis of the conceptual and methodological framework of balancing in various fields of activity. Methods. As a starting methodological premise – a scientific hypothesis, we substantiate th

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Aghav, Madhuri S., and Prof. Sachin A. Vyawhare. "A Study on Fog Computing for Load Balancing Mechanism." International Journal of Ingenious Research, Invention and Development (IJIRID) 3, no. 6 (2025): 625–30. https://doi.org/10.5281/zenodo.14786908.

Повний текст джерела

Анотація:

<em>Recently, fog computing has emerged as a modern distributed paradigm and a complement to cloud computing for delivering services. Fog systems extend computing and storage capabilities to the network edge, significantly addressing the challenges of delay-sensitive applications while enabling location awareness and mobility support. Load balancing plays a crucial role in fog networks, preventing situations where some fog nodes are either overburdened or underutilized. By implementing effective load-balancing strategies, Quality of Service (QoS) parameters such as resource utilization, throug

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Cerezo, Juan, Encarnación Morales, and José Plaza. "Control System in Open-Source FPGA for a Self-Balancing Robot." Electronics 8, no. 2 (2019): 198. http://dx.doi.org/10.3390/electronics8020198.

Повний текст джерела

Анотація:

Computing in technological applications is typically performed with software running on general-purpose microprocessors, such as the Computer Processing Unit (CPU), or specific ones, like the Graphical Processing Unit (GPU). Application-Specific Integrated Circuits (ASICs) are an interesting option when speed and reliability are required, but development costs are usually high. Field-Programmable Gate Arrays (FPGA) combine the flexibility of software with the high-speed operation of hardware, and can keep costs low. The dominant FPGA infrastructure is proprietary, but open tools have greatly i

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Liao, Yuan Jiang, Ming Li, and Chang Kai Xu. "The Design of Two-Wheel Mobile Platform Using Digital DC Servo Motor Based on CompactRIO." Advanced Materials Research 181-182 (January 2011): 92–98. http://dx.doi.org/10.4028/www.scientific.net/amr.181-182.92.

Повний текст джерела

Анотація:

This paper describes some main design methods of the mechatronics system and control system of the self-balancing two-wheel mobile platform based on a CompactRIO embedded controller, two digital DC servo motors with two odometry encoders, etc. We use mechatronics-oriented virtual prototyping tools to design the mechatronics system using SolidWorks and LabVIEW. And we use fuzzy controller to control this mobile platform. Through several experiments of self-balancing, linear running, it was confirmed that the mobile platform could realize stable mobile motion in a flat surface environment by the

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Kumar, D. Vasanth, G. Madhan Mohan, and K. M. Mohanasundaram. "Lean Tool Implementation in the Garment Industry." Fibres and Textiles in Eastern Europe 27, no. 2(134) (2019): 19–23. http://dx.doi.org/10.5604/01.3001.0012.9982.

Повний текст джерела

Анотація:

Garment Manufacturing is one of the oldest in the world, compromising a high number of critical operations. The main issues in the garment industry are the lead time, production rate, very poor line balancing and fabric wastes. Productivity improvement is carried out by implementing the various lean tools in the industry, such as 5S, Value Stream Mapping (VSM) and line balancing in the sewing section. After the implementation of lean tools in the garment industry, the outcomes observed are a reduction in work-in-progress inventory, increases in the production process and increased line efficie

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Masood, Anum, Muhammad Sharif, Mussarat Yasmin, and Mudassar Raza. "Virtualization Tools and Techniques: Survey." Nepal Journal of Science and Technology 15, no. 2 (2015): 141–50. http://dx.doi.org/10.3126/njst.v15i2.12131.

Повний текст джерела

Анотація:

Virtualization is a technique in which the user required services run remotely in a ubiquitous environment which gives scalable resources. Virtualization is being used in cloud computing for load balancing and aggregation of cloud resources. Virtualization provides higher hardware utilization. It is also being used for partitioning of computational resources and hence supports sharing of resources. Virtualization has different types such as Native virtualization, Full virtualization, Operating system level virtualization and Para virtualization. Other than these there is Resources virtualizati

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Loka, Novita, and Rizky Thania Sabila. "Balancing Challenges and Opportunities: Enhancing Early Childhood Cognitive Skills Through Digital Tools." GENIUS Indonesian Journal of Early Childhood Education 5, no. 2 (2024): 105–18. https://doi.org/10.35719/gns.v5i2.187.

Повний текст джерела

Анотація:

This study investigates the role of digital tools, particularly educational videos, in enhancing early childhood cognitive skills at Pertiwi Indralaya Kindergarten. Using a qualitative descriptive approach based on the Miles and Huberman framework, data were collected through classroom observations, interviews, and documentation involving 20 children aged 4–5. Findings reveal that 55% of students exhibited "Very Well Developed" cognitive skills, while 45% were "Developing as Expected," with no children in lower categories. Key cognitive areas improved included problem-solving, memory retention

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Hodovanets, Nataliia, and Viktoriya Lehan. "Modern English teaching tools: balancing engagement and effectiveness in the learning process." Сучасні дослідження з іноземної філології, no. 1(27) (2025): 406–18. https://doi.org/10.32782/2617-3921.2025.27.406-418.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

DiEuliis, Diane, and James Giordano. "Balancing Act: Precision Medicine and National Security." Military Medicine 187, Supplement_1 (2021): 32–35. http://dx.doi.org/10.1093/milmed/usab017.

Повний текст джерела

Анотація:

ABSTRACT Developments in genetics, pharmacology, biomarker identification, imaging, and interventional biotechnology are enabling medicine to become increasingly more precise in “personalized” approaches to assessing and treating individual patients. Here we describe current scientific and technological developments in precision medicine and elucidate the dual-use risks of employing these tools and capabilities to exert disruptive influence upon human health, economics, social structure, military capabilities, and global dimensions of power. We advocate continued enterprise toward more complet

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Sharma, Shalini, Maninder Singh, and Keerti Bhusan Pradhan. "Balancing Innovation and Safety in Digital Healthcare." Global Clinical Engineering Journal 7, no. 1 (2025): 5–16. https://doi.org/10.31354/globalce.v7i1.262.

Повний текст джерела

Анотація:

In an era of rapid digital transformation, patient safety is increasingly intertwined with technological advancements in healthcare. This article explores the dual nature of these innovations, where tools like telemedicine, artificial intelligence (AI), and electronic health records (EHRs) offer significant potential to enhance care delivery and introduce new risks such as algorithmic bias, cybersecurity threats, and challenges in minimizing patient risks. A balanced approach focusing on robust safety protocols and continuous learning is required to ensure technology enhancement without underm

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!