Увійти

Готові списки джерел за темами / Brzoza / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Brzoza.

Дисертації з теми "Brzoza"

Автор: Grafiati

Опубліковано: 25 липня 2024

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 дисертацій для дослідження на тему "Brzoza".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Ryšková, Marie. "Hydrodynamická brzda." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401536.

Повний текст джерела

Анотація:

This thesis is devoted to the design of hydraulic retarder, with emphasis on CFD simulation. The thesis is based on simulation of flow in hydraulic retarder with included transformation of heat. The generation of heat at breaking with hydraulic retarder significantly influences amount of created moment. With use of simulations the anticipated breaking moment emerging on break of a spinning wheel from the design is verified. A group of brake models, in which the hydraulic break belongs to, is introduced in the beginning chapters. This following chapter focuses on design of simulation model that

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Tumas, Jolanta. "Językowo-kulturowy obraz dębu, brzozy i wierzby (na materiale polskim i litewskim)." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2005. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2005~D_20050607_144044-23899.

Повний текст джерела

Анотація:

This dissertation is about oak, birch and willow in polish and lithuanian language and culture. The job gives the answer, what place engage oak, birch and willow in folklore, in religion, in magic, what symbolize and what are expressed. Main purpose is: what does trees means for polish and lithuanian countryman.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Lacheta, Lukáš. "Pomocná brzda pro eskalátor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227977.

Повний текст джерела

Анотація:

Purpose of engaged task is elaborate a functional mechanism to emergency brake for escalators company Otis. To this purpose is gradually reached up in several phases. In primary phase was taken view on similar products from competitive company and do not get in conflict with patent right, in second phase was needed delimitate working space for brake and exact specification of straining. In next steps the proposal and test phase is blending together. In this moment emergency brake has own shape and first tests are showing the functions, but as well necessity modification of same elements on bra

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Vít, Jakub. "Odstředivá brzda motoru pro pneumatikový válec." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232084.

Повний текст джерела

Анотація:

The aim of my thesis is the design of centrifugal brakes to prevent twisting of the combustion engine with pneumatic compactor. In the first part of my thesis I deal with existing and similar systems that prevent over speeding. In the second part I deal with the design of its own centrifugal brake. This includes basic functional, strength, thermal calculation, design of components and fabrication drawings according to the assignment.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Aleksandar, Čabrilo. "Mehaničke osobine i brzina rasta zamorne prsline u zavarenom spoju pancirnog čelika." Phd thesis, Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, 2018. https://www.cris.uns.ac.rs/record.jsf?recordId=107385&source=NDLTD&language=en.

Повний текст джерела

Анотація:

Cilj rada je bila izrada kvalitetnog zavarenog spoja pancirnog čelika.Zavareni spoj poseduje dobre zatezne karakteristike, kao i visoku energijuudara u metal šavu i ZUT-u, visoku otpornost na propagaciju prsline umetal šavu i ZUT-u. Osnovni materijal ima najveću zateznu čvrstoću,najnižu energiju udara, najmanju žilavost loma i otpornost na propagacijuprsline. Nakon balističkih ispitivanja ustanovljeno je da ZUT i osnovnimaterijal poseduju balističku otpornost, dok metal šava ne zadovoljavastandarde. Ispitivanjem gasne hromatografije ustanovljena je niskakoličina difundovanog i zadržanog vodoni

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Strmenský, Tomáš. "Švajčiarska rozpočtová brzda - komparácia s rozpočtovými politikami Nemecka a USA." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-113832.

Повний текст джерела

Анотація:

The thesis deals with fiscal policy and fiscal rules. The thesis investigates the cause and effect of the deficit bias and rules, which are designed to reduce it. Specifically, the cases of constitutional swiss expenditure debt brake, US deficit brake from the 1980s and also the recently reformed german fiscal rule are discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Sositko, Sławomir. "Ocena potrzeb wodnych i nawodnieniowych brzozy brodawkowatej (Betula pendula Roth.) oraz lipy drobnolistnej (Tilia cordata Mill.) w nasadzeniach fitomelioracyjnych na gruncie porolnym." Rozprawa doktorska, Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy, 2019. http://dlibra.utp.edu.pl/Content/1505.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Akberdiyev, Dauren [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Die Diversifizierung internationaler sicherheitspolitischer Kooperation Kasachstans von der Unabhängigkeitserklärung bis zur Gegenwart / Dauren Akberdiyev. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1082347590/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Akberdiyev, Dauren Verfasser], and Michael [Akademischer Betreuer] [Brzoska. "Die Diversifizierung internationaler sicherheitspolitischer Kooperation Kasachstans von der Unabhängigkeitserklärung bis zur Gegenwart / Dauren Akberdiyev. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:18-77026.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Kühn, Ulrich Thomas [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Cooperative arms control in Europe (1973-2014) : a case of regime decay? / Ulrich Kühn. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1106404556/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Völker, Denise [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Konfliktfaktor Waldschutz? : Analyse der Widerstände gegen Waldschutzgebiete an der Fernstraße BR-163 im brasilianischen Amazonasbecken / Denise Völker. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2015. http://d-nb.info/1076359981/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Burilkov, Alexandr [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The Maritime Strategy of Regional Powers: China, India, Iran, and Brazil from 2001 to 2015 / Alexandr Burilkov ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2017. http://d-nb.info/1128310139/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Jeremias, Gunnar [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Zivilgesellschaftliche Rüstungskontrolle - NGOs als Akteure im Compliancemonitoring : das Beispiel des Regimes zum Verbot Biologischer Waffen / Gunnar Jeremias. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2015. http://d-nb.info/1076359965/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Faß, Eric [Verfasser], Torsten [Gutachter] Schlesinger, Patrick [Gutachter] Brzoska, and Michael [Gutachter] Mutz. "Sozioökonomische Analysen zu körperlich-sportlicher Aktivität und subjektiver Gesundheit im Alter / Eric Faß ; Gutachter: Torsten Schlesinger, Patrick Brzoska, Michael Mutz ; Fakultät für Sportwissenschaft." Bochum : Ruhr-Universität Bochum, 2021. http://d-nb.info/122969479X/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Grauvogel, Julia [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The 'Internal Opposition' Effect of International Sanctions : Insights from Burundi, Zimbabwe and a Qualitative Comparative Analysis of Sub-Saharan Africa / Julia Grauvogel ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2018. http://d-nb.info/1150401370/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kubiak, Katarzyna Anna [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Poland and the B61 : Theory-led Analysis of the Polish Official Position on American Extended Nuclear Deterrence in Europe / Katarzyna Anna Kubiak ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2018. http://d-nb.info/1152384333/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Bernath, Andreas [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "Klimakatastrophen, Vertreibung und Gewalt : eine makro-qualitative Untersuchung sowie eine Einzelfallstudie über den Zusammenhang von umweltbedingten Bevölkerungsbewegungen und gewaltsamen Konflikten / Andreas Bernath. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1095766511/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Bernath, Andreas Verfasser], and Michael [Akademischer Betreuer] [Brzoska. "Klimakatastrophen, Vertreibung und Gewalt : eine makro-qualitative Untersuchung sowie eine Einzelfallstudie über den Zusammenhang von umweltbedingten Bevölkerungsbewegungen und gewaltsamen Konflikten / Andreas Bernath. Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:18-78239.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Nováček, Vladislav. "Konstrukce MR spojky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229390.

Повний текст джерела

Анотація:

This thesis deals with the design of the magnetorheological (MR) clutch. The extensive literature research with particular conclusions to each design variant of MR clutches or brakes has been done in the first part of the thesis. The second part of the thesis describes the design of the actual MR clutch based on the results of the analytical calculation of the magnetic circuit. Finally, the experiments verifying the function of the key segments of the clutch, and the whole clutch are summarized in the third part of the thesis.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Milan, Šolaja. "Efekti eksperimentalnog tretmana na razvoj brzinske izdržljivosti kod devojčica." Phd thesis, Univerzitet u Novom Sadu, Fakultet sporta i fizičkog vaspitanja u Novom Sadu, 2016. https://www.cris.uns.ac.rs/record.jsf?recordId=101237&source=NDLTD&language=en.

Повний текст джерела

Анотація:

U na&scaron;oj zemlji je malo objavljenih istraživanja iz oblasti kako brzinske izdržljivosti kod devojčica, tako i eksperimentalnih tretmana koji bi doveli do povećanja ove motoričke sposobnosti. U samoj atletici ova tema nije dovoljno istraživana s’ obzirom da je veoma puno prisutna u praksi. Osnovni cilj studije bio je da se utvrdi efekat eksperimentalnog tretmana na brzinsku izdržljivost devojčica.Uzorak ispitanika ovog istraživanja činilo je 100 devojčica, uzrasta između 13 i 15 godina iz  Novog Sada, koje su uključene u trenažni proces u sportskim klubovima. Uzorak ispitanika

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Fiala, Martin. "Návrh a optimalizace řídicích algoritmů pro elektrickou brzdu s EC motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230816.

Повний текст джерела

Анотація:

This work is concerned with creating the control algorithm in microcontroller dsPIC30F6015 for electric brake with BLDC motor which will dynamically load testing BLDC motors. The work also includes programming user interface for controlling and settings parameters the control unit.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Brzoska, Jan [Verfasser], Doris [Gutachter] Fischer, and Björn [Gutachter] Alpermann. "Market forecasting in China: An Artificial Neural Network approach to optimize the accuracy of sales forecasts in the Chinese automotive market / Jan Brzoska ; Gutachter: Doris Fischer, Björn Alpermann." Würzburg : Universität Würzburg, 2020. http://d-nb.info/1209881292/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Zermegh, Tomáš. "Zvyšování tepelných, elektrických a mechanických vlastnosti bezpečnostních brzd." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254463.

Повний текст джерела

Анотація:

This thesis is dealing with a detailed analysis of electromechanical brake used in emergency situations to stop the electric motor. Environmental influences, bad material proposal or bad design parameters can significantly limit the behaviour of a brake. The thesis presents several approaches to avoid these limitations, to limit the reaction time and achieve better results. The attached programs can be used either for innovation, or for the new brake design based on the entry requirements.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Vaněk, Roman. "Návrh asistenční brzdy pro mechanický invalidní vozík." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317004.

Повний текст джерела

Анотація:

The goal of this diploma thesis was the design of an assistance brake for a mechanical invalid wheelchair. The theoretical part includes the sorting of wheelchairs and available technology of braking systems. In the practical part, there was prepared the design and testing of the assistance brake. In the final chapter, the technical-economic evaluation of the designed solution was discussed and compared with the existing technologies.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Knöpfel, Sascha [Verfasser], and Michael [Akademischer Betreuer] Brzoska. "The Roles of Non-Nuclear-Weapon States in Advancing Nuclear Disarmament from 2007 to 2013 : Ideal Type Role Concepts as well as Germany’s Role Conception and Role Performance / Sascha Knöpfel ; Betreuer: Michael Brzoska." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2019. http://d-nb.info/1201821231/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Pilčík, Adam. "Pedálová skupina formulového vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229838.

Повний текст джерела

Анотація:

This thesis draws up a basic overview of the current groups pedal cars. It focuses on creating a computer model of the pedal group with the help of the mathematical model and simulation stress of individual components and proposed relief.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Bačovský, Marek. "Tepelně-mechanická analýza brzdových kotoučů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231296.

Повний текст джерела

Анотація:

The aim of this thesis is the analysis of three types commonly used automotive brake discs in terms of their thermal and mechanical resistance on a defined braking maneuver. Another objective is to make an evaluate of the different structural solutions and compare them by each other.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Štencl, Michal. "Bezpečnostní parkovací brzdy pro servomotory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318158.

Повний текст джерела

Анотація:

This Master thesis is focused on electromagnetic brakes for servomotors. In the first chapter is described principle of operation, later then design and main parameters are explained. The main part of thesis is focused on calculation of dynamic parameters of electromagnetic brakes. Calculations are solved first by analytic method in Matlab–Simulink, then by finite element analysis. Results are compared with measurements on prototype brake.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Drbohlav, Jan. "Návrh výkonové, řídicí a měřicí elektroniky elektrické brzdy s EC motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230825.

Повний текст джерела

Анотація:

This paper describes the design of control, measurement and power electronics department for dynamic loading of electronically commutated motors with electric brakes. After comparing the advantages and disadvantages of possible conceptions the proposal focuses on electric brake operating in generator mode and the value of load is controlled by the current dissipated in a dummy load.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Skupová, Dagmar. "Analýza zpomalování tramvají a vyhodnocení jeho účinků na stojící cestující." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232683.

Повний текст джерела

Анотація:

The thesis is concerned with establishing the braking retardation and determining of it's influence for standing passengers. The thesis consists of three parts. The first part is theoretical and it is engaged in brake system of tramway. The second, experimentally part talks about practical establishing of braking retardation. And the third part of thesis is gived to discussion about established values of braking retardation. The aim of thesis is to find a value of braking retardation, when standing passengers don't fall down.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Rušar, Filip. "Univerzální úsťové zařízení na útočnou pušku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318834.

Повний текст джерела

Анотація:

This diploma thesis deals with the design of a universal muzzle device for the assault rifle. The device is designed to produce Selective Laser Melting. The main objective is the elimination negative effects of gunshot. The paper explores possibilities of using porous structures for this type of equipment. The influence of individual types of porous structures on the flow of gases is monitored. The universal muzzle device itself is optimized using CFD analyzes. The device was made using SLM technology and experimentally verified. His impact on the impact, gun lift, noise and flame elimination

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Vojče, Zbyněk. "Bezkontaktní zatěžování a měření vysokootáčkových strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377128.

Повний текст джерела

Анотація:

Práce se zabývá problematikou měření momentu u velmi vysokootáčkových strojů. Z důvodů vysokých rychlostí jsou tradiční metody měření momentu nepoužitelné, z tohoto důvodu je nutno vyvinout novou bezkontaktní metodu. Pro měření je zvolena metoda zatěžování vířivou brzdou, pro kterou je proveden analytický výpočet jejích vlastností pomocí Maxwellových rovnic a je vytvořen model vířivé brzdy v programu FEMM a Ansys/Maxwell 2D. Na závěr jsou výsledky simulací a výpočtů porovnány s měřením na prototypech brzdy.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Mladen, Mikić. "Хронични и акутни ефекти изоинерцијалног тренинга на доминантне моторичке способности кошаркаша јуниорског узраста". Phd thesis, Univerzitet u Novom Sadu, Fakultet sporta i fizičkog vaspitanja u Novom Sadu, 2018. https://www.cris.uns.ac.rs/record.jsf?recordId=107372&source=NDLTD&language=en.

Повний текст джерела

Анотація:

Циљ истраживања је да се утврде ефекти 8 недеља изоинерцијалног тренинга на доминантне моторичке способности кошаркаша. Испитаници, 36 кошаркаша јуниорског узраста (17.58±0.50 година) су подељени у 3 групе: прву експерименталну (ЕСС; n=12) која је вежбала тренинге снаге на изоинерцијалном тренажеру, другу експерименталну (CON; n=12) која је вежбала традиционални изодинамички тренинг снаге са слободним теговима, и контролну групу (KON; n=12) која није вежбала тренинге снаге. Током есперименталног програма ЕСС и CON групе су имале укупно по 12 тренинга снаге са истоветним бројем серија и

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Süttő, Daniel. "Měření zpomalení nákladních automobilů nad 12 tun při brzdění motorem." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254242.

Повний текст джерела

Анотація:

This thesis is dealing with measuring the deceleration of lorries when they are braked by the engine. The weight of the vehicles given is bigger than 12 tons. The thesis can be divided into theoretical and practical part. In the theoretical part there are special presumptions to manage the given problem successfully. The stress is on the construction of lorries and on driving resistances which influence the process of deceleration a lot. The thesis also analyses the technical solution of each possibilities of braking and also the function of the gearbox. In the practical part the method of mea

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Toman, Svatopluk. "Výroba pístu diskové brzdy objemovým tvářením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228278.

Повний текст джерела

Анотація:

The project of Master’s thesis elaborated within engineering studies of branch 23-03-T002 proposes a technology of production of disk brake piston made of low-carbon steel EN C10E. Supposed production amount is 300 000 pieces per year. With knowledge of literary study on the theme of cold steel bulk forming, three variants of production technique were proposed. The chosen one, for which the technological and energy computations were accomplished, consists of two basic forming operations. For manufacture realization was selected three-stage automatic forming machine TPD 630 (manufacturer Šmeral

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Kolbábek, Lukáš. "Lis LKDS 800." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230292.

Повний текст джерела

Анотація:

The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Dorňák, Michal. "Navíjecí stroj." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228653.

Повний текст джерела

Анотація:

The aim of this diploma thesis is the proposal of solution of three-axial winding machine for winding technology of rotary profile. Winding materials are continual springs of carbon, aramid or glass fibre impregnated by resin. The main construction change of the machine compared to commercial available solutions is the use of linear motor as a frame element instead of roller screws or toothed chain. Linear motors have higher dynamics of the movement and they can reach higher speed compared to other solutions, which guarantee increase of the machine productivity. The main importance is put not

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Regner, Dominik. "Studie příčného rychlostního pole v blízkosti rotujícího kola s uvažováním vlivu nucené konvekce kotoučové brzdy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399576.

Повний текст джерела

Анотація:

The master thesis deals with the influence of a local change of temperature due to advection from disc brake to axial velocity field close to the rotating wheel of a car. The second goal is to set parameters applicable to various wheel discs and study of the influence of these parameters to aerodynamical properties of car and thermodynamical properties of the disc brake. The thesis is numerically executed in StarCCM+. The first part focuses on theoretical background about the numerical solution and current status of research. There are described disc parameters, geometry input and solver setti

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Haman, Tomáš. "Lis LKJP 630." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230363.

Повний текст джерела

Анотація:

Master’s thesis deals with the design of the drive of the press LKJP 630, the configuration is a fixed range by the construction of LKJP. The thesis was ordered by partnership with company ŽĎAS, which is introduced. The first part is devoted to analysis of solved problems, it primarily contains the overview on forming machines, used drives and a description of their main parts. The second part deals with the drive itself, there is accomplished the design and performed the strength analysis of the major parts of the drive. Drawing documentation and bill of materials are included.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Vladimir, Tomović. "Uticaj brzine hlađenja polutki, vremena otkoštavanja post mortem i postupka salamurenja na kvalitet i bezbednost kuvane šunke." Phd thesis, Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, 2009. https://www.cris.uns.ac.rs/record.jsf?recordId=71279&source=NDLTD&language=en.

Повний текст джерела

Анотація:

Cilj ovog rada je bio de se utvrdi uticaj brzog vazdu&scaron;nog hlađenja polutki (na –31°C do cca 4 sata, a zatim na 2 do 4°C do 8, odnosno do 24 sata post mortem), vremena otko&scaron;tavanja post mortem (8 i 24 sata post mortem), nakon brzog hlađenja, i postupka salamurenja (bez ili sa vakuumom) proizvedenog svinjskog mesa (M. semimembranosus) na kvalitet i bezbednost kuvane &scaron;unke (konzervi od mesa u komadima), odnosno postavljen je zadatak razvoja novog proizvodnog procesa kuvane &scaron;unke koji će počivati na značajnoj racionalizaciji tehnolo&scaron;kog postupka, a

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Adam, Petr. "Pomocná jeřábová kočka licího jeřábu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241179.

Повний текст джерела

Анотація:

This master thesis deals with issue design of crab trolley. Concretely is acted about auxiliary crab trolley with required capacity 65 000 kg. This crab is on overhead crane, which is situated at hall of foundry. In particular chapters is processed design of lifting mechanism and travelling mechanism, which is amended to strength control of frame. This whole leads to output solutions, which is drawing documentation.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Tkadlec, Dušan. "Návrh dvouosé automatické vidlicové frézovací hlavy osazené elekrovřetem s aplikací pohonů Harmonic-Drive." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229238.

Повний текст джерела

Анотація:

This master´s work deal with design two axis cutter head with possible variants drive of axis. The part of this work is also technical– economics valuation of single variants, calculation torque and force from motor head and design taking head in two axis. Cutter head should be applicated to boring and cutting headstock given to type with posibility of adaptive exchenges spindle.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Žid, Miroslav. "Pojezdový mechanismus mostového jeřábu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377472.

Повний текст джерела

Анотація:

The aim of this master thesis is to design replacing the central drive of the overhead crane with dislocated drives. It´s a tong crane with the lifting capacity of 63 tons, located inside the hall. In the thesis is processed functional calculation of two types of drives, the associated types of brakes and the coupling element. Next there is a strength control of a new mechanism seat and a selected components. This whole leads to the output, which is the drawing documentation.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Podhora, David. "Konstrukční návrh pohonu přední hnané nápravy traktoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378416.

Повний текст джерела

Анотація:

This master’s thesis is deal with the design of the tractor’s front axle drive to enlarge its braking efficiency of the standing tractor fixed by the parking brake. In the first two chapters, the basic information related to the above stated issue is being summarized. Next, procedure of creating the design including the fundamental calculation proposal is being described. In the last chapter, the strain-stress analysis of the selected partial sections of the design is being presented. The final design is supported with the drawing documentation that is being part of this master’s thesis, too.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Hrabovský, Jozef. "Optimalizační analýza brzdového kotouče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227872.

Повний текст джерела

Анотація:

Subject of this diploma thesis is break wheel optimalization analysis. Break wheels are used in mountain bike downhill races in extreme conditions. It is the first product of this type of an emergent company that was made by the use of intuitive approach. The reason for optimalization is improper behavior of existing solution that occurred during testing. This optimalization consists of finding and analyzing existing characteristics, deciding which factors influence this improper behavior, suggesting new solution and verification of this solution. Break wheel characteristics were detected in a

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Aleksandar, Rajić. "Primena aditivnih proizvodnih tehnologija u postupku preciznog livenja ortopedskih implantata." Phd thesis, Univerzitet u Novom Sadu, Tehnički fakultet Mihajlo Pupin u Zrenjaninu, 2015. http://www.cris.uns.ac.rs/record.jsf?recordId=95425&source=NDLTD&language=en.

Повний текст джерела

Анотація:

Doktorska disertacija razmatra primenu savremenih aditivnih proizvodnih tehnologija u postupku preciznog livenja ortopedskih implantata i njihov uticaj na skraćenje vremena i smanjenje tro&scaron;kova izrade topljivih modela. Konvencionalni postupak preciznog livenja ortopedskih implantata zahteva značajno vreme i tro&scaron;kove za izradu kalupa za topljive modele. U disertaciji je razvijena metoda za &bdquo;brzo precizno livenje“ kojom se elimini&scaron;e potreba za izradom kalupa za topljive modele ortopedskih implantata. Potrebno je utvrditi da li se pomoću predložene metode &bdquo;b

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Brza, Lukáš. "Design rýpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228570.

Повний текст джерела

Анотація:

The design of the excavator follows requirements of machines for demolition work. The excavator is equipped with an innovative type of under carriage, which not only increases mobility over the demolition sites but also the visibility from the driver’s cabin. The components of the excavator, that improve the demolition work, are special types of tracks, suspensions and articulated steering. Tracks can change their shape to increase the stability and also to adapt to the diff erent types of ground. The suspensions with tracks are able to adapt to the terrain thereby they lighten the asperity. S

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Bártová, Jana. "Návrh zkapalňovacího cyklu Helia." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417538.

Повний текст джерела

Анотація:

The present master thesis deals with the technologies for gas liquefaction focused on helium. The first part of the thesis contains a description of the history of liquefaction, production and usage of liquid helium, as well as the principles of liquefaction and cooling cycles. In the following part of the thesis is a detailed model of the liquefaction cycle for which radial-axial turbine wheels were designed. The last part of the thesis contains financial analysis of the suitability of using the expander with eddy current brake and the expander with an electric generator.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Hertl, David. "Vychystávací jednotka skladovacího systému Multi tower." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230086.

Повний текст джерела

Анотація:

This Diploma thesis deals with design of the drive and frame of the face and side picking unit of the Multitower storage system, and deals with their strength analysis. The first part of the thesis is the research part and deals with the picking unit´s conception, power options, drive solutions, carriage and safety elements. The thesis also deals with the solution of the wheel´s passive resistance, drive and brakes of both picking units. There are designed appropriate solutions on the basis of the results. The final part of the thesis contains the description of the picking unit structure and

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Predrag, Kojić. "Hidrodinamika i prenos mase u airlift reaktoru sa membranom." Phd thesis, Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, 2016. http://www.cris.uns.ac.rs/record.jsf?recordId=100280&source=NDLTD&language=en.

Повний текст джерела

Анотація:

U okviru doktorske disertacije izvedena su eksperimentalna istraživanja osnovnih hidrodinamičkih i maseno-prenosnih karakteristika airlift reaktora sa spoljnom recirkulacijom sa ugrađenom vi&scaron;ekanalnom cevnom membranom u silaznu cev (ALSRM). ALSRM je radio na dva načina rada: bez mehurova u silaznoj cevi (način rada A) i sa mehurovima u silaznoj cevi (način rada B) u zavisnosti od nivoa tečnosti u gasnom separatoru. Ispitivani su uticaji prividne brzine gasa, povr&scaron;inskih osobina tečne faze, tipa distributora gasa i prisustva mehurova gasa u silaznoj cevi na sadržaj gasa, brzinu te

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!