Готові списки джерел за темами / Ceramic proppants

Зміст

Статті в журналах
Дисертації
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Ceramic proppants"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Ceramic proppants".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Ceramic proppants"

Cutler, R. A., D. O. Enniss, A. H. Jones, and S. R. Swanson. "Fracture Conductivity Comparison of Ceramic Proppants." Society of Petroleum Engineers Journal 25, no. 02 (1985): 157–70. http://dx.doi.org/10.2118/11634-pa.

Повний текст джерела

Анотація:

Abstract Lightweight, intermediate-strength proppants have been developed that are intermediate in cost between sand and bauxite. A wide variety of proppant materials is characterized and compared in a laboratory fracture conductivity study. Consistent sample preparation, test, and data reduction procedures were practiced, which allow a relative comparison of the conductivity of various proppants at intermediate and high stresses. Specific gravity, proppants at intermediate and high stresses. Specific gravity, corrosion resistance, and crush resistance of each proppant also were determined. pr

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Wen, Desheng Zhou, Tuan Gu, Yanhua Yan, Xin Yang, and Shucan Xu. "Experimental Investigation on the Influence of Proppant Crushing on the Propped Fracture Conductivity." Processes 13, no. 7 (2025): 2166. https://doi.org/10.3390/pr13072166.

Повний текст джерела

Анотація:

Hydraulic fracturing is a key stimulation technique for enhancing the productivity of tight sandstone reservoirs, with the conductivity of propped fractures serving as a critical parameter for evaluating stimulation effectiveness. This study investigated the conductivity behavior of propped fractures through laboratory experiments using commonly used oilfield proppants. The effects of proppant size, type, concentration, and proppant combination on fracture conductivity were systematically evaluated. Results show that at low closure stress, conductivity differences among various proppant types

Стилі APA, Harvard, Vancouver, ISO та ін.

B, Guo. "Effect of Fluid Contact Angle of Oil-wet Ceramic Fracture Proppant on the Water Flow from Sandstones to Proppant Packs." Petroleum & Petrochemical Engineering Journal 6, no. 1 (2022): 1–9. http://dx.doi.org/10.23880/ppej-16000295.

Повний текст джерела

Анотація:

Ceramic fracture proppants are extensively used for enhancing oil and gas well productivity in low-permeability reservoirs. Previous work reported attracting-oil-repelling-water (AORW) property of oil-wet proppants at the faces of fractures. Because of lack of method for measuring contact angle of proppant packs, the terms water-wet proppant and oil-wet proppant were defined on the basis of observations of liquid droplets on the surfaces of proppant packs without quantitative measurement. An innovative method was developed in this study to determine the contact angles of fracture proppant pack

Стилі APA, Harvard, Vancouver, ISO та ін.

de Campos, Vitor Polezi Pesce, Gisele Aparecida Amaral Labat, Eduardo Sansone, Douglas Gouvea, and Guilherme Frederico Bernardo Lenz e Silva. "Development of Sodium Hydroxide-Activated Metakaolin with Nanocarbon Materials as Synthetic Ceramic Proppants." Materials Science Forum 912 (January 2018): 251–56. http://dx.doi.org/10.4028/www.scientific.net/msf.912.251.

Повний текст джерела

Анотація:

The use of proppants in hydraulic fracturing has significantly grown worldwide in recent years. Discoveries of large unconventional reservoirs in the north of Brazil have collaborated to give it the 10th position among countries with the world's largest shale reserves. Nowadays, studies on nanomaterials that are used as additives in proppants are the focus of North America's companies and universities in order to develop either proppants that can suffer mechanical and chemical changes inside the reservoir or that enable their traceability and direction. This paper presents a study on synthesis

Стилі APA, Harvard, Vancouver, ISO та ін.

Guo, Zixi, Dong Chen, and Yiyu Chen. "Numerical Calculation and Application for Crushing Rate and Fracture Conductivity of Combined Proppants." Energies 17, no. 16 (2024): 3868. http://dx.doi.org/10.3390/en17163868.

Повний текст джерела

Анотація:

Proppant is one of the key materials for hydraulic fracturing. For special situations, such as middle-deep reservoirs and closure pressures ranging from 40 MPa to 60 MPa, using a single proppant cannot solve the contradiction between performance, which means crushing rate and fracture conductivity, and cost. However, using combined proppants is an economically effective method for hydraulic fracturing of such special reservoirs. Firstly, for different types, particle sizes, and proportions of combined proppants, various contact relationships between proppant particles are considered. The rando

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Ming, and Boyun Guo. "Effect of Fluid Contact Angle of Oil-Wet Fracture Proppant on the Competing Water/Oil Flow in Sandstone-Proppant Systems." Sustainability 14, no. 7 (2022): 3766. http://dx.doi.org/10.3390/su14073766.

Повний текст джерела

Анотація:

Ceramic fracture proppants are extensively used for enhancing the recovery of fossil energy and geothermal energy. Previous work has reported the attracting-oil-repelling-water (AORW) property of oil-wet proppants at the faces of fractures. Because of the lack of a method for measuring the contact angle of proppant packs, the terms water-wet proppant and oil-wet proppant were defined based on observations of liquid droplets on the surfaces of proppant packs without quantitative measurement. An innovative method was developed in this study to determine the contact angles of fracture proppant pa

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Kaiyue, Huijun Wang, Yi Zhou, et al. "Preparation and characterization of low-cost high-performance mullite-quartz ceramic proppants for coal bed methane wells." Science and Engineering of Composite Materials 25, no. 5 (2018): 957–61. http://dx.doi.org/10.1515/secm-2017-0142.

Повний текст джерела

Анотація:

AbstractIn this study, the mullite-quartz-based proppants were successfully prepared by using the coal gangue as the raw materials. Then, the effects of the additive and the sintering temperature on the composition, microstructure, and properties of the proppants were investigated. Results showed that the proppants sintered at 1250°C with the 10 wt% bauxite additive presented the best performance, which was very close to that of the quartz-proppant, and met the operational requirements of the 52 MPa coal bed methane wells. The viscous flow mechanism of the liquid phase formed during the sinter

Стилі APA, Harvard, Vancouver, ISO та ін.

Song, Enpeng, Quan Jin, and Ke Cai. "Research on the hardness testing method of ceramsite proppants." Journal of Physics: Conference Series 3021, no. 1 (2025): 012009. https://doi.org/10.1088/1742-6596/3021/1/012009.

Повний текст джерела

Анотація:

Abstract A method for detecting the hardness of ceramic particle support agents is proposed. The feasibility, accuracy, and repeatability of the method are studied. Taking commonly used ceramic particle supports as the research object, the problem of difficult hardness detection caused by the macroscopic morphology of ceramic particle supports was solved by optimizing the pre-treatment sample preparation method; Using the method of controlling a single variable, the specifications (mesh size) and origin of the ceramic particle support agent were changed separately. The hardness of the ceramic

Стилі APA, Harvard, Vancouver, ISO та ін.

Liang, Tiancheng, Jinwei Zhang, Chuanyou Meng, Nailing Xiu, Bo Cai, and Haifeng Fu. "Conductivity prediction of proppant-packs based on particle size distribution under variable stress conditions." E3S Web of Conferences 205 (2020): 03010. http://dx.doi.org/10.1051/e3sconf/202020503010.

Повний текст джерела

Анотація:

The conductivity of the proppant-packs is critical in the productivity of hydraulically fractured wells. Proppants are also the best medium for studying particle packing. Sand and ceramic media are two most common proppants used for hydraulic fracturing. This study focuses on investigate the relation between conductivity and properties of proppant-packs, the particle-size distribution, porosity and mean particle diameter have been measured. The porosity of the proppant pack under zero pressure is determined from bulk density and apparent density. To accurately measure the porosity under variab

Стилі APA, Harvard, Vancouver, ISO та ін.

Alkan, Gözde, Peter Mechnich, and Johannes Pernpeintner. "Improved Performance of Ceramic Solar Absorber Particles Coated with Black Oxide Pigment Deposited by Resonant Acoustic Mixing and Reaction Sintering." Coatings 12, no. 6 (2022): 757. http://dx.doi.org/10.3390/coatings12060757.

Повний текст джерела

Анотація:

Spherical particles based on bauxite-type raw materials, commonly referred to as proppants, are state-of-the-art for particle receivers of concentrated solar power plants. Particles are heated in a fluidized reactor by focused sunlight and are transported to a heat-exchanger or a storage tank. Therefore, key properties for absorber particles are high solar absorptance and mechanical endurance. Due to their relatively poor content of color-giving transition-metal cations, bauxite-derived proppants show limited solar absorptance, which is even deteriorating by long-term heat exposure. A deep-bla

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Ceramic proppants"

Rahman, Humairat H. "Evaluation of Pulmonary Function among Workers Engaged in the Manufacture of Hydraulic Fracking Ceramic Proppant." Scholar Commons, 2016. http://scholarcommons.usf.edu/etd/6361.

Повний текст джерела

Анотація:

Workers involved in hydraulic fracking processes are exposed to various types of chemicals and dusts in their workplaces, such as proppants, which hold open the fissures created in the fracking process. Recently, ceramic proppants have been developed that may be less hazardous to workers than traditional proppants. Pulmonary function testing of workers producing ceramic proppant was used to assess the potential inhalation hazards of ceramic proppant. Male workers (n = 100) from a producer of ceramic proppant were evaluated with pulmonary function test data collected and evaluated using The Ame

Стилі APA, Harvard, Vancouver, ISO та ін.

Kulkarni, Mandar. "Mechanics of Light Weight Proppants: A Discrete Approach." Thesis, 2012. http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10858.

Повний текст джерела

Анотація:

Proppants are a specific application of granular materials used in oil/gas well stimulation. Employment of hard and soft particle mixtures is one of the many approaches availed by the industry to improve fracture resistance and the stability of the granular pack in the hydraulic fracture. Current industrial practices of proppant characterization involve long term and expensive conductivity tests. However, the mechanics governing the proppant pack response, in particular the effects due to material, shape and size of particles on the pack porosity, stiffness and particle fragmentation are not

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Ceramic proppants"

Ren, Hongda, Jingfeng Dong, Jingchun Zhang, Fangzhou Xu, Bin Wang, and Tianbo Liang. "Composite Proppants Sintered from Fly Ash and their Application in Fracturing Tight Oil Reservoirs." In 58th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2024. http://dx.doi.org/10.56952/arma-2024-0362.

Повний текст джерела

Анотація:

ABSTRACT: This paper proposes a new low-density, high-strength composite proppant to address the rising cost of proppants in hydraulic fracturing operations in tight oil reservoirs. Fly ash and coal gangue are sintered with a certain concentration of bauxite and alum at 1300°C∼1500°C to form a composite proppant. Results from X-ray diffraction (XRD) and scanning electron microscope (SEM) analyses show comparable strength between ceramic and composite proppants. Although the conductivity of new composite proppants is 15% smaller than ceramic proppants after 150 h of experiments, their strength

Стилі APA, Harvard, Vancouver, ISO та ін.

Porlles, J. W., O. S. Tomomewo, S. A. Afari, E. Gyimah, A. Laalam, and O. Bakelli. "An Experimental Study of the Effect of Long-Term Time-Dependent Proppant Behavior Under HP-HT Reservoir Conditions." In SPE Annual Technical Conference and Exhibition. SPE, 2023. http://dx.doi.org/10.2118/215120-ms.

Повний текст джерела

Анотація:

Abstract The long-term sustainability of fracture conductivity in a geothermal system using proppant will be affected by crushing pressure and geothermal fluids. Previous experiments have shown that for short-term periods, field testing results have indicated some performance improvements and a few experiments for long-term periods have shown that different types of proppants and the crushing test results suggest probable geomechanical degradation of the proppants under the test conditions. So, some proppants, such as ceramics and kryptospheres, showed a significant degree of mechanical streng

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, L., X. F. Ma, Y. S. Zou, et al. "Experimental Study of Proppant Crushing and Conductivity Reduction Within Rough Fracture in Shale Gas Formations." In 58th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2024. http://dx.doi.org/10.56952/arma-2024-0759.

Повний текст джерела

Анотація:

ABSTRACT: To investigate the impact of surface roughness on proppant crushing and its effect on fracture conductivity in Shale Gas Formations, laboratory conductivity experiments were performed on standard core columns drilled along hydraulic fractures. The morphology of proppants within the fractures was observed using computed tomography (CT) and scanning electron microscopy (SEM). The results indicate that the roughness of the fracture surface has a greater impact on ceramic proppants than on quartz sand in terms of crushing rate. For high roughness surfaces, quartz sand is suitable for sha

Стилі APA, Harvard, Vancouver, ISO та ін.

Mack, Mark Gavin, and Chris Coker. "Development and Field Testing of Advanced Ceramic Proppants." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/166323-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Saldungaray, Pedro M., and Terry Palisch. "Understanding Ceramic Proppants: Are They All Created Equal?" In SPE Unconventional Gas Conference and Exhibition. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/164042-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Al Moajil, Abdullah, Ahmed Alghizzi, Ali Alsalem, and Sajjad AlDarweesh. "Advanced HSP Ceramic Proppants— An Evaluation and Effect of Fines on Proppant Pack Conductivity." In SPE Trinidad and Tobago Section Energy Resources Conference. Society of Petroleum Engineers, 2018. http://dx.doi.org/10.2118/191182-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Vysotskiy, Roman, Galina Makashova, Vladimir Radaev, and Alexey Yudin. "Accuracy and Uncertainty Evaluation of Measuring the ISO Long-Term Conductivity of Proppants." In SPE Annual Technical Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205940-ms.

Повний текст джерела

Анотація:

Abstract One of the critical factors in planning a hydraulic fracturing treatment is proppant selection. Conductivity is an important property for ensuring efficient reservoir stimulation. Conductivity data obtained during laboratory measurements help determine which proppant to use. ISO provides standard testing procedures and methodology for measuring the long-term conductivity of proppants but does not document expected measuring uncertainty. This paper addresses accuracy and uncertainty estimation of ISO 13503-5 conductivity measurements. For the purposes of this study, three proppant samp

Стилі APA, Harvard, Vancouver, ISO та ін.

Stephens, Walter T., Stephen K. Schubarth, Deborah I. Rivera, E. Michael Snyder, and Daniel Clare Herndon. "Statistical Study of the Crush Resistance Measurement for Ceramic Proppants." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2006. http://dx.doi.org/10.2118/102645-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alkan, Gözde, Peter Mechnich, Hicham Barbri, et al. "Evaluation of ceramic proppants as heat transfer and storage medium." In THE INTERNATIONAL CONFERENCE ON BATTERY FOR RENEWABLE ENERGY AND ELECTRIC VEHICLES (ICB-REV) 2022. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0150215.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Hai, Xiwu Yang, Jian Zhang, et al. "Optimization of Slurry Operation Parameters Through the Application of Dynamic Proppant Conductivity Apparatus." In 57th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/arma-2023-0231.

Повний текст джерела

Анотація:

ABSTRACT During hydraulic fracturing operations, proppants were usually pumped in a small-diameter, medium-diameter, and large-diameter sequence. Thus, the hydraulic fracture was propped by different size and types of proppants. It is found that the slurry operation parameters such as fluid viscosity, sand-slurry ratio, and pump rate could affect proppant migration and settlement in the fractures. It is crucial to evaluate the conductivity of these propped fractures while considering the migration and placement of proppant size and types. This paper proposes practical dynamic fracture conducti

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Ceramic proppants"

Johnson, F., and K. Fox. DEVELOPMENT OF GLASS AND GLASS CERAMIC PROPPANTS FROM GAS SHALE WELL DRILL CUTTINGS. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1096222.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sparks, Taylor D., John Mclennan, John Fuertez, and Kyu-Bum Han. Ceramic Proppant Design for In-situ Microbially Enhanced Methane Recovery. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1415142.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!