Дисертації з теми "CGE framework"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "CGE framework".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Johnsson, Richard. "Transport Tax Policy Simulations and Satellite Accounting within a CGE Framework." Doctoral thesis, Uppsala : Univ., Department of Economics, 2003. http://www.loc.gov/catdir/toc/fy043/2003504674.html.
Повний текст джерелаBaker, Jonathan (Jonathan Early). "The impact of including water constraints on food production within a CGE framework." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68446.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 73-76).
This research explores the long-term relationship between water resources, irrigated land use change and crop production within a computable general equilibrium modeling framework. The modeling approach is developed on a variant of the MIT Emissions Prediction and Policy Analysis (EPPA) model that describes three agriculture sectors-crops, livestock and managed forestry-five land types-cropland, pasture land, managed forest land, natural grass land and natural forest land-and conversion among these land types. I further develop this framework by describing crop production as the aggregate production of crops grown on irrigated and non-irrigated cropland. Water resources, through the parameterization of regional irrigable land supply curves, limit conversion to irrigated cropland and thus constrain regional crop production. Land use change, dynamics of irrigated land and regional water demand and crop production are investigated with the new model structure. Non-irrigated cropland is found be expanding faster than irrigated cropland. However, regionally, competition from biofuels for non-irrigated cropland may drive further expansion in irrigated cropland. Regarding water demand, most regions are withdrawing a very small share of their renewable water resource. Crop production levels are compared to results from a model that does not include water constraints. Global crop production declines a small amount with the most significant regional effect observed in the Middle East where regional water constraints have severely restricted the area by which irrigated cropland can expand. This result highlights the importance of considering water resource constraints in regions that experience, or might experience, shortages of water.
by Jonathan Early Baker.
S.M.in Technology and Policy
Bussolo, Maurizio. "A Mediterranean region FTA : some economic and environmental effects studied within a dynamic CGE framework." Thesis, University of Warwick, 1997. http://wrap.warwick.ac.uk/109738/.
Повний текст джерелаSPINELLI, ADRIANO. "Modeling Water Reallocation Policies in a CGE Framework: The Impact of Drought on the Kenyan Economy." Doctoral thesis, Università Cattolica del Sacro Cuore, 2010. http://hdl.handle.net/10280/781.
Повний текст джерелаClimate change and human pressure on water resources make water management policies primordial in the agenda of policy makers. I first propose a literature review of the works on Water Computable General Equilibrium (CGE) Models suggesting the following classification: (i) competition between sectors; (ii) water pricing policies and tariffs; (iii) water and trade issues; (iv) CGE and other models. Secondly, the effects of droughts on the Kenyan economy are studied by means of a static CGE model, calibrated on the 2003 Social Accounting Matrix (SAM) of Kenya. As a water scarce Sub-Saharan country, Kenya is among those countries considered particularly exposed to drought problems. This has been witnessed in recent years by several recurring droughts (1994, 1998-2000, 2001, and 2003) which have harshly hit the most vulnerable part of the country, namely the Arid and Semi Arid Lands (ASAL). Besides, I propose the introduction of several taxation schemes in order to produce an extra revenue to be either reinvested in increasing the efficiency of the water sector in Kenya, or redistributed to the poorest rural households. Finally we simulate the implementation of the UN-FAO and World Bank “Arid Land and Resource Management Project” (ALRMP). The results show that, firstly, the effects of reducing water endowment are stronger than when increasing water endowment. Secondly, simulating a drought scenario – where not just water endowment but also availability of land and the productivity of selected activities are reduced - gives a more coherent picture of the outcomes. Thirdly, taxing raw water (the water factor) may negatively affect rural dwellers as they are owners of water resources. Finally, I found that the ALRMP has a positive impact on mitigating the negative effects of droughts in Kenyan ASAL.
ANINDYA, BHATTACHARYA. "An Integrated Analytical Framework of Sustainable Energy for All: Developing Asia Perspective." Kyoto University, 2015. http://hdl.handle.net/2433/199411.
Повний текст джерела0048
新制・課程博士
博士(エネルギー科学)
甲第19087号
エネ博第311号
新制||エネ||64(附属図書館)
32038
京都大学大学院エネルギー科学研究科エネルギー社会・環境科学専攻
(主査)教授 手塚 哲央, 教授 宇根﨑 博信, 准教授 MCLELLAN Benjamin
学位規則第4条第1項該当
Li, Xue. ""Cage" Nano and Micro-particles for Biomedical Applications." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLS316/document.
Повний текст джерелаDrug delivery systems are engineered technologies to administer pharmaceutical ingredients to improve their therapeutic effects, aiming at minimizing their side effects by means of targeted delivery and/or controlled release. “Cage” particles recently drew special attention since they could act as “drug containers” which potentially load large amount of drugs, improve their stability and offer the possibilities to co-encapsulate synergetic drugs. Cyclodextrins (CDs) are typical “cage” molecules with a hydrophobic cavity and a hydrophilic outer surface. Taking advantage of the host-guest interactions between β-CD and benzophenone (Bz), CD based nanoparticles (CD-NPs) were the first formulation investigated. CD-NPs of around 100 nm were instantaneously produced by mixing two aqueous solutions of neutral polymers: 1) poly-CD containing β-CDs, and 2) Bz grafted Dex (Dex-Bz). The “green” and facile preparation procedure makes it attractive formulation, whereas its limitation lies on the low drug payloads (~ 5 wt%). In order to improve the drug loading capacity of CDs, porous CD based metal organic frameworks (CD-MOFs) were synthesized, which contain not only CD cavities, but also large pores built up by CDs self-assembly. Lansoprazole (LPZ) was incorporated in CD-MOF microcrystals (~ 6 µm) reaching payloads as high as 23.2 ± 2.1% (wt). Remarkably, each CD cavity was able to host a drug molecule, offering new opportunities for the use of CD-MOFs for drug delivery purposes. However, these particles disassembled in aqueous media, which limits their application for oral and intravenous administration. Surface modification is therefore necessary to improve their stability in water. The drug loaded CD-MOF nanocrystals (~ 650 nm) were successfully embedded in polyacrylic acid (PAA) polymer matrices. The composite microspheres exhibited spherical shapes and sustained drug release over a prolonged period of time (over 48 h). Drug loaded MOF/PAA composite microspheres were not toxic in vitro (cell viability ~ 90%) even at very high concentrations up to 17.5 mg/mL. MOF/PAA composite microspheres constitute an efficient and pharmaceutically acceptable MOF-based carrier for sustained drug release. However, the process of surface modification was complicated and lead to larger particles and reduced drug payloads. Water-stable MOFs are a novel type of hybrid particles, showing a high potential as drug carriers. Iron trimesate MOFs, namely, MIL-100 (Fe) (MIL stands for Material of Institute Lavoisier) was among the first nano-scaled MOFs used for drug delivery. These particles were stable in water but degraded in phosphate buffer saline (PBS) losing their crystallinity and constitutive trimesate linkers. However, it was discovered that they kept their morphology intact. A thorough analysis based on Raman microscopy was carried on to gain insights on both the morphology and chemical composition of individual particles. It was evidenced the formation of a sharp erosion front during particle degradation. Noteworthy, the MOFs did not degrade during drug loading nor surface modification. Co-encapsulation of two synergic antibiotics (amoxicillin and potassium clavulanate) in MIL-100 (Fe) nanoMOFs was achieved following a “green” procedure by soaking nanoMOFs in aqueous solutions of both drugs. Molecular modelling showed that each drug preferentially located in a separate nanoMOF compartment. Surprisingly, nanoMOFs were prone to co-localize with bacteria once internalized in infected macrophages. NanoMOFs acted synergistically with the entrapped drugs to kill intracellular S. aureus, in vitro. These results pave the way towards the design of engineered nanocarriers in which each component synergistically plays a role in fighting the disease. These studies unravel the potential of “cage” particles for efficient drug entrapment and controlled release and open numerous possibilities for applications
Ogawa, Kohei. "Synthesis and properties of novel hydrocarbons containing rigid cage frameworks." 京都大学 (Kyoto University), 2005. http://hdl.handle.net/2433/144926.
Повний текст джерела0048
新制・課程博士
博士(工学)
甲第11581号
工博第2527号
新制||工||1343(附属図書館)
23224
UT51-2005-D330
京都大学大学院工学研究科物質ｴﾈﾙｷﾞｰ化学専攻
(主査)教授 小松 紘一, 教授 光藤 武明, 教授 大江 浩一
学位規則第4条第1項該当
Truong, Hai The 1962. "Management framework of automotive full service supplier in computer aided engineering (CAE)." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/91742.
Повний текст джерелаMorris, J. A. "A bioinformatics framework for management and analysis of high throughput CGH microarray projects." Thesis, University College London (University of London), 2012. http://discovery.ucl.ac.uk/1364856/.
Повний текст джерелаPavlas, Michal. "Strategic Development of Commercial Real Estate Company KCRE: CEE Expansion in internationalization framework." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-76272.
Повний текст джерелаMarcantonio, Graziano. "Development of framework for the manufacture of customized titanium cervical cage implants using additive manufacturing." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86243.
Повний текст джерелаENGLISH ABSTRACT: Neck pain is a common phenomenon that occurs in a large percentage of the population every day. While many occurrences are not deemed critical such as those from muscle strain which can be treated with rest and pain medication, others due to sports injuries, whiplash from car accidents, bad posture or degeneration of the intervertebral disc can be quite severe. In extreme cases failure of the vertebra(e) or the intervertebral disc requires surgery and possibly the use of cervical implants. Where intervertebral discs fail due to herniation or Degenerative Disc Disease (DDD), Anterior Cervical Discectomy and Fusion (ACDF) is a common surgical method used to remove the a ected disc and replace it with a cervical cage implant. These implants are designed to restore the height between the vertebrae, allowing bone from both vertebrae to grow through them and mineralise. Additive Manufacturing (AM) technologies can produce parts with complex geometries not possible using conventional manufacturing methods. This design freedom, coupled with CT scans of a patient, allow for tailoring an implant to the speci c anatomy of the a ected vertebrae using CAD software. Such an approach must be regulated and shown to be technically and commercially feasible before it can be implemented in industry. This study sought to develop a framework for manufacturing customized cervical cage implants using additive manufacturing. The e cacy of customization to reduce the risk of subsidence was investigated by means of non-destructive and destructive mechanical testing on six cadaver specimens, using readily available PEEK cage implants as a benchmark. The results showed that the customized implant was comparable to the PEEK, with no statistically signi cant di erence between the two. In extreme cases, where PEEK implants cannot be used, customized implants could be a suitable alternative to reduce the risk of subsidence. A manufacturing cost analysis was conducted to determine economic feasibility. The estimated cost and selling price of the customized implants under various utilization scenarios and mark-ups was compared to readily available PEEK implants. The estimated selling prices of the customized implants compared favourably to the PEEK verifying the economic viability of using AM.
AFRIKAANSE OPSOMMING: Nek pyn is 'n algemene verskynsel wat daagliks na tevore kom in die bevolking. Baie gevalle word nie as krities geklasi seer nie soos byvoorbeeld spier pyn wat behandel kan word deur genoegsame rus en pyn medikasie. Pyn wat deur sportbeserings, sweepslag beserings 'whiplash' tydens motor ongelukke, verkeerde postuur, of deur slytasie van 'n intervertebrale skyf veroorsaak is, word dikwels as ernstig geklasi seer. In ekstreme gevalle waar die werwel(s) of die inervertebrale skyf(we) faal, sal chirurgie en servikale inplantate moontlik nodig wees. Waneer intervertebrale skywe faal weens herniatie of Degeneratiewe Skyf Siekte (DDD) kan 'n algemene chirurgiese metode, Anterieure Servikale Discectomie en Fusie (ACDF), gebruik word om die gea ekteerde skyf te verwyder en dit te vervang met 'n servikale samesmelting implantaat. Hierdie implantate herstel die hoogte tussen rugwerwels en is ontwerp sodat die been deur dit kan groei en mineraliseer. Komplekse geometrieë kan vervaardig word deur toevoegingsvervaardiging (AM) tegnologieë. Die ontwerp vryheid, gepaard met CT-skanderings en CAD-sagteware stel mens in staat om die geometrie van die implantaat aan te pas tot die spese eke anatomie van die gea ekteerde vertebra. So 'n benadering moet gereguleer word en eers tegnies en kommersieel uitvoerbaar bewys word voordat dit in die bedryf geïmplementeer kan word. Hierdie studie poog verder om 'n raamwerk vir die vervaardiging van persoonlike servikale implantate deur middel van toevoegingsvervaardiging te ontwikkel. Die doeltre endheid van persoonlike implantate om te verhoed dat die chirurg die eind-plaat beskadig, en sodoende die risiko van insakking te verminder, is ondersoek deur middel van meganiese toetse op ses kadawer monsters. Hierdie toetse is gedoen met behulp van geredelik beskikbaar PEEK servikale implantate as 'n maatstaf. Die resultate het getoon dat die persoonlike- en PEEK implantate vergelykbaar is. In moontlike gevalle waar PEEK implantate nie geskik sou wees nie, kan persoonlike implantate 'n alternatiewe opsie wees om die risiko van insakking te verminder.
Meierhofer, Sophie Elizabeth. "White shark cage diving in South Africa: a critical assessment of South Africa's regulatory framework." Master's thesis, University of Cape Town, 2017. http://hdl.handle.net/11427/25050.
Повний текст джерелаAldakheel, Eman A. "A Cloud Computing Framework for Computer Science Education." Bowling Green State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=bgsu1322873621.
Повний текст джерелаBoronas, Andreas. "Ein Framework für verteilte Ereignisbeobachtung." [S.l. : s.n.], 2003. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10519012.
Повний текст джерелаVogelgsang, Christian. "The lgf3 (lumigraph framework version 3) project a versatile implementation framework for image-based modeling and rendering = Das lgf3 (lumigraph framework version 3) Projekt /." [S.l. : s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=974157295.
Повний текст джерелаBeichter, Tobias. "Dynamische Einbindung unterschiedlicher Scheduling-Algorithmen in eine Grid Umgebung." [S.l. : s.n.], 2003. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB11051847.
Повний текст джерелаTramberend, Henrik. "Avocado: a distributed virtual environment framework." [S.l. : s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=967442222.
Повний текст джерелаYeung, Sai Kit. "Stochastic framework for inverse consistent registration /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?BIEN%202005%20YEUNG.
Повний текст джерелаLi, Xi. "Benchmark generation in a new framework /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?IELM%202007%20LI.
Повний текст джерелаUddin, Md Mesbah. "Shifting the paradigm of Corporate Social Responsibility (CSR) towards Corporate Social Entrepreneurship (CSE) : an exploratory study to develop a theoretical framework." Thesis, Durham University, 2018. http://etheses.dur.ac.uk/12631/.
Повний текст джерелаDannenberg, David Randall. "Development and Evaluation of Virtual World Instruction Based on a Constructivist Learning Environment Design Framework." Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/51794.
Повний текст джерелаPh. D.
Einhorn, Ralf. "Ein Framework zur verteilten Produktion von Präsentationsaufzeichnungen." [S.l.] : [s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=979446104.
Повний текст джерелаBraun, Elke. "A framework for integrating object recognition strategies." [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=980256178.
Повний текст джерелаMeinicke, Peter. "Unsupervised learning in a generalized regression framework." [S.l. : s.n.], 2000. http://deposit.ddb.de/cgi-bin/dokserv?idn=960755594.
Повний текст джерелаMurphy, Emily. "Themyth of 'soft power counterterrorism': A comparative historical framework evaluating deradicalization and countering violent extremism programs in the West." Thesis, Boston College, 2017. http://hdl.handle.net/2345/bc-ir:109016.
Повний текст джерелаIn the decade following the September 11, 2001 attacks on the United States, global focus has shifted towards analyzing how to combat terrorism. "Countering Violent Extremism" policies, or CVE, emerged as a means to combat the growing threat of extremist attacks against Western and Western-backed governments around the world. CVE promotes the use of deradicalization and integration techniques to develop trust in communities considered "at-risk" of becoming radicalized and executing extremist attacks. Problematically, CVE policies have been adopted and adored without having been scrutinized. I consider three historical cases of policies very similar to CVE, in France, Great Britain, and the United States, and analyze how CVE may distract from a concerning trend towards immigration, law enforcement, and military action instead of meaningful engagement
Thesis (BA) — Boston College, 2017
Submitted to: Boston College. College of Arts and Sciences
Discipline: Departmental Honors
Discipline: Politicaql Science
Lau, Ho Lam. "An adaptive framework for searching XML documents /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?CSED%202007%20LAU.
Повний текст джерелаHomenko, Neto Alexander. "Internacionalização de pequenas e médias empresas brasileiras: os fatores de distância sob a perspectiva empreendedora." Pontifícia Universidade Católica de São Paulo, 2010. https://tede2.pucsp.br/handle/handle/1403.
Повний текст джерелаThis research analyzes the factors of distance in international business from the perspective of the entrepreneur of small and medium Brazilian company. To establish the structure proposed in this work was taken as a basis for the factors of distance in international business, the CAGE framework proposed by Ghemawat (2001) and the typology of the entrepreneur, the model investigated by Andersson (2000). The sample has analyzed consisted of 30 small businesses that responded to a questionnaire on the Web (e-survey) and the method applied on this research were the correlation matrix of bivariate Pearson in a two-tailed test and the Conbach's alpha to measure the reliability to the sample. We concluded in this research that the factors of distance in international business, when analyzed in isolation, correlate differently than when analyzed according to the profile of the entrepreneur. And on the typology of the entrepreneur adopted, there is no. evidence for a profile of the entrepreneur for small and medium firm in the research sample. For future research, it was proposed extension of the structure factors of distance for international business related to the profile of the entrepreneur with, a focus not only quantitative but also qualitative
Esta pesquisa analisa os fatores de distância em negócios internacionais sob a perspectiva do empreendedor da pequena e média empresa brasileira. Para elaborar a estrutura proposta deste trabalho tomou-se como base, para os fatores de distância em, negócios internacionais, a estrutura CAGE, proposta por Ghemawat (2001) e para a tipologia do empreendedor, o modelo investigado por Andersson (2000). A amostra analisada foi composta por 30 pequenas e médias empresas que responderam a um questionário na web (e-survey) e o método aplicado à pesquisa foi a matriz de correlação bivariada de Pearson bi-caudal e para dar confiabilidade à amostra foi aplicado o teste de Alpha de Cronbach. Concluí-se nesta pesquisa que os fatores de distância em negócios internacionais, quando analisados de forma isolada, correlacionam-se de forma diferente do que quando analisados em função do perfil do empreendedor. E diante da tipologia do empreendedor adotada, não há um perfil definido de empreendedor para a pequena e média empresa na amostra da pesquisa. Para futuras pesquisas, foi proposta a extensão da estrutura dos fatores de distância para negócios internacionais relacionados ao perfil do empreendedor c,om um enfoque não somente quantitativo, mas também qualitativo
Briggs, Jared Calvin. "Developing an Architecture Framework for Cloud-Based, Multi-User, Finite Element Pre-Processing." BYU ScholarsArchive, 2013. https://scholarsarchive.byu.edu/etd/3813.
Повний текст джерелаBowman, Kelly Eric. "Optimization Constrained CAD Framework with ISO-Performing Design Generator." Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2599.pdf.
Повний текст джерелаRössling, Guido. "Animal-Farm an extensible framework for algorithm visualization /." [S.l.] : [s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=964487799.
Повний текст джерелаBauckhage, Christian. "A structural framework for assembly modeling and recognition." [S.l.] : [s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=965351289.
Повний текст джерелаSturzebecher, Dirk. "A portable and flexible Framework for CSCW Systems." [S.l. : s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=960647503.
Повний текст джерелаReicher, Thomas. "A framework for dynamically adaptable augmented reality systems." [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=971837333.
Повний текст джерелаYang, Sen. "An evo-devo framework for product design evolution /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?IELM%202007%20YANG.
Повний текст джерелаLam, Wai-Yeung. "XCQ : a framework for XML compression and querying /." View abstract or full-text, 2003. http://library.ust.hk/cgi/db/thesis.pl?COMP%202003%20LAM.
Повний текст джерелаIncludes bibliographical references (leaves 142-147). Also available in electronic version. Access restricted to campus users.
Ho, Sze Chit. "A framework for the verification of watermarking protocol /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?COMP%202004%20HO.
Повний текст джерелаIncludes bibliographical references (leaves 70-72). Also available in electronic version. Access restricted to campus users.
Blaschka, Markus. "FIESTA: a framework for schema evolution in multidimensional databases." [S.l. : s.n.], 2000. http://deposit.ddb.de/cgi-bin/dokserv?idn=962067342.
Повний текст джерелаLara, Ezequiel Franco. "Framework for online modeling, optimization and monitoring of bioprocesses." [S.l. : s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=967218675.
Повний текст джерелаSimonis, Volker. "A framework for processing and presenting parallel text corpora." [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=971862257.
Повний текст джерелаHerrmann, Markus. "Einsatz des J2EE Frameworks Jakarta Struts." [S.l. : s.n.], 2003. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10952964.
Повний текст джерелаLiu, An. "Rescuers : a framework for reliable web services composition /." access full-text access abstract and table of contents, 2009. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-cs-b30082742f.pdf.
Повний текст джерела"Submitted to Department of Computer Science in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 119-130)
Dujmović, Stjepan. "Anwendungsentwicklung mit Komponenten-Frameworks in der Automatisierungstechnik." Aachen : Shaker, 2002. http://deposit.d-nb.de/cgi-bin/dokserv?idn=96838420X.
Повний текст джерелаKupsch, Florian. "Framework zur dezentralen Integration systemübergreifender Geschäftsprozesse /." Lohmar [u.a.] : Eul, 2006. http://deposit.d-nb.de/cgi-bin/dokserv?id=2858943&prov=M&dok_var=1&dok_ext=htm.
Повний текст джерелаTong, Shan. "Dynamic physiological information recovery : a sampled-data filtering framework /." View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?ECED%202008%20TONG.
Повний текст джерелаTo, Sin Yam. "Quality of service framework for mobile ad hoc networks /." View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?COMP%202003%20TO.
Повний текст джерелаIncludes bibliographical references (leaves 122-124). Also available in electronic version. Access restricted to campus users.
Chen, Jiancong. "Mixed-mode wireless networks : framework and power control issues /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?COMP%202004%20CHEN.
Повний текст джерелаIncludes bibliographical references (leaves 101-108). Also available in electronic version. Access restricted to campus users.
Wahler, Ksenia. "A framework for integrated process and object life cycle modeling /." [S.l.] : [s.n.], 2009. http://opac.nebis.ch/cgi-bin/showAbstract.pl?sys=000282958.
Повний текст джерелаKlein, Markus. "Transformation based component architectures general framework, instantiations and case study /." [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=981777449.
Повний текст джерелаSeitz, Christian. "Ein Framework für die profilbasierte Gruppenbildung in Ad-hoc-Umgebungen." [S.l. : s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=975556614.
Повний текст джерелаHe, Yu Ping. "Entwicklung einer erweiterbaren graphischen Oberfläche für ein offenes integriertes Framework." [S.l.] : Universität Stuttgart , Fakultät Informatik, 1998. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB6783628.
Повний текст джерела