Увійти

Готові списки джерел за темами / Compaction of allograft material

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Compaction of allograft material"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Compaction of allograft material".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Compaction of allograft material"

1

Putzer, David, Débora Coraça-Huber, Alexander Wurm, Werner Schmoelz, and Michael Nogler. "The Mechanical Stability of Allografts After a Cleaning Process: Comparison of Two Preparation Modes." Journal of Arthroplasty 29 (March 24, 2014): 1642–46. https://doi.org/10.1016/j.arth.2014.03.028.

Повний текст джерела

Анотація:

In revision hip arthroplasty, bone loss can be compensated by impacting allograft material. Cleaning processes reduce the risk of bacterial and viral contamination. Cleaned allograft material was compared to native untreated allografts by using a uniaxial compression test. 30 measurements were performed for each group before and after compaction. Grain size distribution and weight loss were determined. A reduction in the amount of large bone fragments and a higher compaction rate were observed in the cleaned bone grafts. The cleaned bone chips presented with a better mechanical resistance to a

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Widiyanti, Prihartini. "Composition Variation on Bone Graft Synthesis Based on Hydroxyapatite and Alginate." Journal of Biomimetics, Biomaterials and Biomedical Engineering 29 (October 2016): 14–21. http://dx.doi.org/10.4028/www.scientific.net/jbbbe.29.14.

Повний текст джерела

Анотація:

Bone grafting is a surgical procedure that replaces missing bone with material from patient′s own body, an artificial, synthetic, or natural substitute. As natural bone grows, it generally replaces the graft material completely, resulting in a fully integrated region of new bone. The type of bone graft are allograft-based bone graft involves allograft bone, Factor-based bone graft are natural and recombinant growth , cell-based bone grafts, ceramic-based bone graft substitutes, polymer-based bone graft. The aim of study are to explore the influence of variations in the composition of alginate

Стилі APA, Harvard, Vancouver, ISO та ін.

3

HIROSE, Norimitsu. "Powder Material for Compaction." Journal of the Japan Society for Technology of Plasticity 56, no. 651 (2015): 285–89. http://dx.doi.org/10.9773/sosei.56.285.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zhou, Hao, Yongjian Guo, Qiang Xu, Guixia Zhang, and Zhen Wang. "Study on Vibration Compaction Energy of Basement Material." Coatings 12, no. 10 (2022): 1495. http://dx.doi.org/10.3390/coatings12101495.

Повний текст джерела

Анотація:

In order to confirm the vibrate compaction energy, the indoor vibration compaction was conducted. Indoor vibration compactor was used to compact skeleton dense cement stabilized aggregate. The acceleration and displacement of the indenter and compaction pressure during the compaction process were measured. The bounce model and the hysteresis curve based on measurement parameters were used to calculate the compaction energy. Three vibration compaction energy were affirmed as: energy of the machinery itself (Eself), energy transmitted from machinery to compacted material (Et) and energy stored b

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Yildiz, Tolga, Joel Gegenheimer, Marco Gleiß, and Hermann Nirschl. "Influence of Particle Properties on Filter Cake Compaction Behavior under Oscillatory Shear." Processes 11, no. 7 (2023): 2076. http://dx.doi.org/10.3390/pr11072076.

Повний текст джерела

Анотація:

Filter cake compaction is a common method for mechanical deliquoring of compressible filter cakes. In addition to the conventional squeezing compaction method, applying oscillatory shear to filter cakes at low pressure is an alternative compaction process in cake filtration. While basic differences in terms of compaction success have already been identified for various materials, a systematic analysis of the influence of material properties on compaction behavior under oscillatory shear is missing. The present work addresses the influence of particle size distribution and increasing particle a

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Chen, Qun, and Yuzhi Li. "SGC Tests for Influence of Material Composition on Compaction Characteristic of Asphalt Mixtures." Scientific World Journal 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/735640.

Повний текст джерела

Анотація:

Compaction characteristic of the surface layer asphalt mixture (13-type gradation mixture) was studied using Superpave gyratory compactor (SGC) simulative compaction tests. Based on analysis of densification curve of gyratory compaction, influence rules of the contents of mineral aggregates of all sizes and asphalt on compaction characteristic of asphalt mixtures were obtained. SGC Tests show that, for the mixture with a bigger content of asphalt, its density increases faster, that there is an optimal amount of fine aggregates for optimal compaction and that an appropriate amount of mineral po

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Zhuo, Shuai, Ning Wang, Ping Lu, and Yong Yao. "The Experimental Study on the Performance of the Reinforced Red Mudstone Using Triaxial Tests." Advanced Materials Research 446-449 (January 2012): 1445–49. http://dx.doi.org/10.4028/www.scientific.net/amr.446-449.1445.

Повний текст джерела

Анотація:

via the red mudstone proceed of the unconsolidated and non-drained triaxial compression test, the research in different degree of compaction reinforcement material under the influence of red mudstone strength. To the different reinforcement layers, different ambient pressure test, analyses not reinforcement material layer number of decorate the more the better, decorate three layer of steel material is better than the four layers of reinforcement decorate material sample. The analysis in different degree of compaction element soil and reinforced soil under test result, the reinforcement materi

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Wang, Yong Bing, Guo Qiang Ying, Jian Lin Hu, Hua Wei Wei, and Qian Zhang. "Analysis for Influence Factors of Cold Recycling Mixture Compaction Test." Applied Mechanics and Materials 204-208 (October 2012): 1633–37. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.1633.

Повний текст джерела

Анотація:

In order to study the factors which influence the inorganic binder stabilized material’s compaction test results, different recycled material content therefore different reclaimed gradation mixtures are tested while varying the amount of cement. The experiment results show that contents of the recycled base material and the recycled surface material on the compaction test results are determined by the change of their density and water absorption ratio. Dry density of the recycled mixture increases with the increase of the reclaimed base material density. Low water absorption ratio of the recyc

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Peterson, Robert L., Kamyar C. Mahboub, R. Michael Anderson, Eyad Masad, and Laith Tashman. "Superpave® Laboratory Compaction Versus Field Compaction." Transportation Research Record: Journal of the Transportation Research Board 1832, no. 1 (2003): 201–8. http://dx.doi.org/10.3141/1832-24.

Повний текст джерела

Анотація:

Laboratory compaction is an important part of asphalt mix design. For the mix design process to be effective, laboratory compaction must adequately simulate field compaction. In this study mechanical properties measured with the Superpave® shear tester were used to evaluate field compaction and laboratory compaction. The field compaction consisted of three test sections with different compaction patterns. The laboratory compaction used the Superpave gyratory compactor with adjustments to several parameters. Results of this study indicate that current gyratory protocol produces specimens with s

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Guillard, François, Pouya Golshan, Luming Shen, Julio R. Valdès, and Itai Einav. "Compaction dynamics of crunchy granular material." EPJ Web of Conferences 140 (2017): 07012. http://dx.doi.org/10.1051/epjconf/201714007012.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Compaction of allograft material"

1

Marketos, George. "An investigation of crushing and compaction bands in granular material." Thesis, University of Cambridge, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.611944.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Osborne, James Dominic. "Bonding mechanisms involved in the roller compaction of an amorphous food material." Thesis, University of Sheffield, 2013. http://etheses.whiterose.ac.uk/4512/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Hunter, Shawn A. "Matrix Stabilization Using Glutaraldehyde and Glycation: Effects on the Material Properties of the Knee Meniscus." Cincinnati, Ohio : University of Cincinnati, 2002. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1029421518.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Knosalla, Christoph. "Experimentelle und klinische Untersuchungen über den Gebrauch von Allograft-Material zur in situ-Behandlung von Infektionen im Bereich der Aorta." Doctoral thesis, Humboldt-Universität zu Berlin, Medizinische Fakultät - Universitätsklinikum Charité, 2001. http://dx.doi.org/10.18452/13746.

Повний текст джерела

Анотація:

Infektionen im Bereich der Aorta stellen heute noch eine der gravierendsten Komplikationen der rekonstruktiven Gefäßchirurgie dar. Ziel der vorliegenden Arbeit war es, die Effektivität von kryokonservierten Aortenallografts bei der in situ-Behandlung einer manifesten Infektion im Bereich der Aorta tierexperimentell zu evaluieren. Dessweiteren sollte die Rolle der im Rahmen der Kryokonservierung zum Zwecke der Dekontamination eingesetzten Antibiotika untersucht werden. Zu diesem Zwecke erfolgte im in-vitro Experiment die Untersuchung der Antibiotikakonzentration im Gewebe sowie die der Freisetz

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Knosalla, Christoph. "Experimentelle und klinische Untersuchungen über den Gebrauch von Allograft-Material zur In-situ-Behandlung von Infektionen im Bereich der Aorta." [S.l.] : [s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=96229070X.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Philipson, Harald. "The effect of thickness and compaction on the recovery of aluminium in recycling of foils in salt flux." Thesis, KTH, Materialvetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-280048.

Повний текст джерела

Анотація:

In Norway, more than 40.000 tonnes of aluminum (Al) in food packaging goes to incineration annually. Recycling this waste would save more than 1.5 TWh of energy and several hundred thousand tonnes of CO2 emissions. However, recycling thin aluminum foil in small packaging is more difficult than recycling of larger and cleaner scrap. In this thesis, properties of compacted coating-free Al foil with five different thicknesses (15, 30, 100, 200, 300 𝜇𝜇m) were investigated and related to percentage Al recovery during remelting in salt flux. This thesis consists of five main parts. Two initial studi

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Taylor, Nicholas. "Hot spots in ammonium nitrate." Thesis, University of Cambridge, 2011. https://www.repository.cam.ac.uk/handle/1810/239412.

Повний текст джерела

Анотація:

Ammonium nitrate (AN) is commonly used as an explosive and as a fertilizer. In both roles it is provided as prills or pellets, approximately spherical and a few millimetres in diameter. The microstructures of several commercially-available AN compositions were investigated usingenvironmental scanning electron microscopy (ESEM) and X-ray microtomography. Those intended for explosive use were found to bemore porous than those intended for fertilizer use. The pores in explosiveprills were also found to form a connected network. The elemental composition of pellets of mixed AN and dolomite was inv

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Schmidtke, Robert [Verfasser]. "Dry granulation via roller compaction : investigation on scale up strategies integrating process parameters and critical material attributes / Robert Schmidtke." Bonn : Universitäts- und Landesbibliothek Bonn, 2018. http://d-nb.info/116146221X/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Szappanos-Csordas, Kitti [Verfasser], Peter [Gutachter] Kleinebudde, and Jörg [Gutachter] Breitkreutz. "Impact of material properties, process parameters and roll compactor design on roll compaction / Kitti Szappanos-Csordas ; Gutachter: Peter Kleinebudde, Jörg Breitkreutz." Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2019. http://d-nb.info/1200634047/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Pérez, Gago Ana [Verfasser], and Peter [Akademischer Betreuer] Kleinebudde. "Roll Compaction Scale-Up: Impact of Material, Effect of Scale and Modelling of The Process Transfer / Ana Pérez Gago ; Betreuer: Peter Kleinebudde." Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2017. http://d-nb.info/1129357279/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Compaction of allograft material"

1

Nazarian, Soheil, Aria Fathi, Cesar Tirado, Vladik Kreinovich, Sergio Rocha, and Mehran Mazari. Evaluating Mechanical Properties of Earth Material During Intelligent Compaction. Transportation Research Board, 2020. http://dx.doi.org/10.17226/25777.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Geo-Logan, '97 Conference ((1997 Logan Utah). Grouting: Compaction, remediation, and testing : proceedings of sessions sponsored by the Grouting Committee of the Geo-Institute of the American Society of Civil Engineers in conjuction with the Geo-Logan '97 Conference, Logan, Utah, July 16-18, 1997. American Society of Civil Engineers, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

1956-, Vipulanandan Cumaraswamy, Center for Innovative Grouting Materials and Technology., American Society of Civil Engineers. Geo-Institute. Grouting Committee., and Geo-Logan '97 (1997 : Logan, Utah), eds. Grouting: Compaction, remediation, and testing : proceedings of sessions sponsored by the Grouting Committee of the Geo-Institute of the American Society of Civil Engineers in conjuction with the Geo-Logan '97 Conference, Logan, Utah, July 16-18, 1997. The Society, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Explosive Compaction of Powders and Composites. Science Publishers, 2006.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Vipulanandan, Cumaraswamy, Utah) Geo-Logan 97 Conference (1997 Logan, and Utah) Geologan 97 Conference (1997 Logan. Grouting: Compaction, Remediation and Testing : Proceedings of Sessions Sponsored by the Grouting Committee of the Geo-Institute of the American Society of civi (Geotechnical Special Publication). American Society of Civil Engineers, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Sarrafi, Majid. Shear and surface characterisation of powder compacts: Determination of the shear and surface characteristics of compacted material, over the pharmaceutical compaction range 20 KPa to 2 MPa, to relate the internal angle of friction to compact surface topography. 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Gužela, Štefan, Peter Peciar, Michaela Peciarová, Martin Juriga, Roman Fekete, and martin Peciar. MECHANIKA PARTIKULÁRNYCH LÁTOK - Vlastnosti partikulárnych látok a metódy ich merania. SPEKTRUM Publishing, 2024. https://doi.org/10.61544/abrb4556.

Повний текст джерела

Анотація:

This book provides a comprehensive overview of particulate materials, their properties, and the engineering principles underlying their processing. Particulate materials, ubiquitous in industries ranging from pharmaceuticals to construction, consist of discrete solid particles. Understanding the unique characteristics of these materials is crucial for designing efficient and effective processing equipment. The book delves into the key factors influencing the behavior of particulate materials, including particle size distribution, shape, surface properties, and inter-particle forces. It explore

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Compaction of allograft material"

1

Ali, Muhammad A., Rehan Umer, and Kamran A. Khan. "Reinforcement Compaction Response." In CT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8021-5_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Dumelow, Philip G. "Earthworks material specification, compaction and control." In ICE Manual of Geotechnical Engineering, Second edition, Volume II. Emerald Publishing Limited, 2023. http://dx.doi.org/10.1680/icemge.66830.1225.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Hocini, Y., A. Medjnoun, and R. Bahar. "Improving soil dry compaction by adding granular material." In Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society. CRC Press, 2024. http://dx.doi.org/10.1201/9781003431749-582.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Tawk, Miriam, Buddhima Indraratna, Cholachat Rujikiatkamjorn, and Ana Heitor. "Review on Compaction and Shearing-Induced Breakage of Granular Material." In Lecture Notes in Civil Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6713-7_21.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Wassenberg, R. B., M. Drygalov, and P. Beiss. "Effect of Die Material on Friction During Iron Powder Compaction." In Friction, Wear and Wear Protection. Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527628513.ch11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Salwan, Geetika, Rayapati Subbarao, and Subbarao Subrata. "Effect of compaction pressure and sintering time on characteristics of nickel based superalloy." In Recent Advances in Material, Manufacturing, and Machine Learning. CRC Press, 2024. http://dx.doi.org/10.1201/9781003450252-73.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Grigoryev, Evgeny G., and Alexander V. Rosliakov. "The Electro-Discharge Compaction of Powder Tungsten Carbide-Cobalt-Diamond Composite Material." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470599730.ch20.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Grigoriev, Eugene, and Alexander Rosliakov. "Electro Discharge Compaction of WC-Co Composite Material Containing Particles of Diamond." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1181.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Völker-Dieben, H. J., and J. D’amaro. "HLA Class I and Class II Matched Donor Material for Improved Corneal Allograft Survival." In Immunogenetics: Advances and Education. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5486-4_25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Sandberg, Odd, Andreas Krona, Sigurd Berg, Flemming Kaad, and Göran Nord. "Application Experiences in Powder Compaction of Iron Powder - Influence of Tool Material on Tool Life." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.649.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Compaction of allograft material"

1

Gao, Shang, and Brahim Benyahia. "Robust Techno-economic Analysis, Life Cycle Assessment, and Quality and Sustainability by Digital Design of Three Alternative Continuous Pharmaceutical Tablet Manufacturing Processes." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.104102.

Повний текст джерела

Анотація:

This study presents a comprehensive comparison of the three alternative downstream manufacturing technologies for pharmaceuticals: i) Dry Granulation (DG) through roller compaction, ii) Direct Compaction (DC), and iii) Wet Granulation (WG) based on the economic, environmental and product quality performances. Firstly, the integrated dynamic mathematical models of the different downstream (drug product) processes were developed using gPROMS formulated products based on data from the literature or/and our recent experimental work. The process models were developed and simulated to reliably captu

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Shakirzyanov, R. I., Yuriy A. Garanin, Artem L. Kozlovskiy, Dmitriy I. Shlimas, Maxim V. Zdorovets, and Dilnaz K. Zhamikhanova. "Study of Phase Composition and Microstructure of Porous Alumina Ceramics Derived from Hydrothermal Powders." In 2024 8th International Conference on Materials Engineering and Nano Sciences & 2024 8th International Conference on Material Engineering and Manufacturing. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-k3kqa8.

Повний текст джерела

Анотація:

Conventional ceramic technology is a widespread technique for synthesizing a large range of materials for household use and engineering applications. However, for advanced technical ceramics different approaches should be used in order to obtain materials with unique physical properties. Despite the well-known technology for the synthesis of alumina-based ceramics, there are a lot of challenges in optimizing manufacturing conditions or integrating the newest technologies. In particular, there are still some challenges in sintering porous bulk ceramics. In this paper, we report on synthesizing

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Liu, Z. "Compaction behaviour of magnesium alloy-based fibre metal laminates at varying forming parameters." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-28.

Повний текст джерела

Анотація:

Abstract. This research presents a methodology for the compaction characterization of thermoplastic prepregs with a twill weaving style under a range of parameters typical of the thermoforming process applied to magnesium alloy-based fibre metal laminates (FMLs). The compaction tests were conducted making use of a plate-to-plate mode testing setup. The through-thickness and transverse width of the prepregs were evaluated on the FML specimen cross-section at varying compaction force and temperature. Significant deformations were observed at the lowest compaction force above the prepreg polymer

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Mulligan, Phillip, Cody Lough, Douglas Bristow, Edward Kinzel, and Catherine Johnson. "Explosive compaction of additively manufactured material." In SHOCK COMPRESSION OF CONDENSED MATTER - 2019: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP Publishing, 2020. http://dx.doi.org/10.1063/12.0000847.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Koptelov, Anatoly. "Modelling compaction-induced defects in overmoulding of thermoplastic composites." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-69.

Повний текст джерела

Анотація:

Abstract. This study introduces a computationally efficient numerical tool for the design and manufacturing of thermoplastic overmoulded parts. The tool is set to predict compaction-induced wrinkles in overmoulded continuous fibre organosheets. Using a homogenisation approach, whereby the constitutive behaviour of each organosheet is described by the DefGen Protocol material model, allows to significantly reduce the required computational time in comparison with traditional ply-by-ply methods. Experimental characterisation of the material was performed under various processing conditions to ex

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Traouli, Sourour. "Anisotropic expansion and shrinkage behavior of thermosetting prepreg layups with respect to the compaction strategy." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-255.

Повний текст джерела

Анотація:

Abstract. The manufacturing of high-performance thermosetting composites requires precise control over thermo-mechanical and chemical processes, particularly during curing. Cure shrinkage in the thermoset matrix, coupled with thermal expansion and compaction, significantly influences the final part's dimensional stability and structural integrity. Additionally, improper compaction before curing can lead to defects such as residual porosity. This study characterizes these interrelated phenomena using a combination of advanced experimental tools: a press compaction setup, the PvT-HADDOC apparatu

Стилі APA, Harvard, Vancouver, ISO та ін.

7

SOUSA, Pedro. "Improving precision in the cavity thickness measurement for fabric compaction." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-53.

Повний текст джерела

Анотація:

Abstract. As seen in the first international compressibility benchmark, inaccuracies in the fabric stack thickness measurement, the approach to compliance correction and the non-parallelism between compaction plates resulted in highly inaccurate compression curves. The factors influencing the accuracy of thickness measurements in compaction tests were studied to provide a comprehensive guidance and measurement recommendations to improve upon the current procedures and enhance the accuracy of thickness measurements. These include the variability in the direct thickness measurements due to accur

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Tan, Feng-Yi, Zheng-Yong Zhang, Yong-Xia Bao, Fang-Jun Zhang, and Ying-Biao Liu. "Blasted Material Compaction Results Analysis in Dam." In The 2nd Annual International Workshop on Materials Science and Engineering (IWMSE 2016). WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813226517_0158.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Barclay, Paul L., Michelle A. Espy, Brian M. Patterson, et al. "Material point methods applied to granular compaction." In 23RD BIENNIAL CONFERENCE OF THE APS TOPICAL GROUP ON SHOCK COMPRESSION OF CONDENSED MATTER. AIP Publishing, 2024. https://doi.org/10.1063/12.0032383.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Cadden, Allen W., Dennis G. Grubb, David D. Miller, and Jason G. Mibroda. "A Proposed ''Dredged Material Family of Compaction Curves'' for Field Compaction Control Purposes." In Geo-Denver 2007. American Society of Civil Engineers, 2007. http://dx.doi.org/10.1061/40916(235)17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Compaction of allograft material"

1

Chelluri, Bhanu. Dynamic Magnetic Compaction for Near Net Shape Forming of Advanced Material Products. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada328458.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Shin, Boonam, Nitin Tiwari, Peter J. Becker, and Antonio Bobet. Improved Light Weight Deflectometer Test (LWD) and Analysis. Purdue University, 2025. https://doi.org/10.5703/1288284317813.

Повний текст джерела

Анотація:

This study focused on improving light weight deflectometer (LWD) testing protocols and understanding material and equipment variability. The Indiana Department of Transportation (INDOT) adopted the LWD test for its efficiency and effectiveness in measuring soil stiffness, a crucial parameter for pavement structural layers. However, challenges remain for implementing LWD testing, particularly in small construction areas. There are also challenges with establishing standardized performance-related criteria for various subgrade treatments. To address these obstacles, this research aimed to develo

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Thembeka Ncube, Ayanda, and Antonio Bobet. Use of Recycled Asphalt. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317316.

Повний текст джерела

Анотація:

The term Reclaimed Asphalt Pavement (RAP) is used to designate a material obtained from the removal of pavement materials. RAP is used across the US in multiple applications, largely on asphalt pavement layers. RAP can be described as a uniform granular non-plastic material, with a very low percentage of fines. It is formed by aggregate coated with a thin layer of asphalt. It is often used mixed with other granular materials. The addition of RAP to aggregates decreases the maximum dry unit weight of the mixture and decreases the optimum water content. It also increases the Resilient Modulus of

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Shmulevich, Itzhak, Shrini Upadhyaya, Dror Rubinstein, Zvika Asaf, and Jeffrey P. Mitchell. Developing Simulation Tool for the Prediction of Cohesive Behavior Agricultural Materials Using Discrete Element Modeling. United States Department of Agriculture, 2011. http://dx.doi.org/10.32747/2011.7697108.bard.

Повний текст джерела

Анотація:

The underlying similarity between soils, grains, fertilizers, concentrated animal feed, pellets, and mixtures is that they are all granular materials used in agriculture. Modeling such materials is a complex process due to the spatial variability of such media, the origin of the material (natural or biological), the nonlinearity of these materials, the contact phenomenon and flow that occur at the interface zone and between these granular materials, as well as the dynamic effect of the interaction process. The lack of a tool for studying such materials has limited the understanding of the phen

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Snyder, Victor A., Dani Or, Amos Hadas, and S. Assouline. Characterization of Post-Tillage Soil Fragmentation and Rejoining Affecting Soil Pore Space Evolution and Transport Properties. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7580670.bard.

Повний текст джерела

Анотація:

Tillage modifies soil structure, altering conditions for plant growth and transport processes through the soil. However, the resulting loose structure is unstable and susceptible to collapse due to aggregate fragmentation during wetting and drying cycles, and coalescense of moist aggregates by internal capillary forces and external compactive stresses. Presently, limited understanding of these complex processes often leads to consideration of the soil plow layer as a static porous medium. With the purpose of filling some of this knowledge gap, the objectives of this Project were to: 1) Identif

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!