Готові списки джерел за темами / Composite layers

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Composite layers"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Composite layers".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Composite layers"

Liang, Yun Xing, Li Chen, Hai Wen Liu, and Hua Wu Liu. "The Development of a High Elastic 3D Prefabricated Composite." Advanced Materials Research 332-334 (September 2011): 1773–76. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.1773.

Повний текст джерела

Анотація:

With the development of modern technology, fiberglass composite materials are widely applied. The advantages of fiberglass reinforced composite materials are high strength and light weight. In order to produce a prefabricated fiberglass composite, a machine chart was drafted for weaving the 3D fiberglass fabric with five layers. The obtained five-layer 3D fabrics were composited with polyurethane matrix. Afterwards, the performance of the prefabricated composites was tested and the optimal ratio of fiberglass to matrix was determined by statistical analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ismadi, S. S. Munawar, S. S. Kusumah, et al. "Physical and Mechanical Properties of Natural Fiber Polyester Laminate Composites." IOP Conference Series: Earth and Environmental Science 891, no. 1 (2021): 012002. http://dx.doi.org/10.1088/1755-1315/891/1/012002.

Повний текст джерела

Анотація:

Abstract The utilization of natural fibers as reinforcing composites has been widely used. Indonesia has natural fibers abundantly such as ijuk fiber (Arenga pinnata), sisal fiber (Agave Sisalana) and coconut fiber (Cocos Nucifera). Random orientation application of the fiber in composites affected to the lower properties. Therefore, the particular orientation of fibres wereapplied in manufacturing of composite by laminating the short fiber with Polyurethane (PU) adhesive. The size and moisture content (MC) of fiber were 14-15 cm and +10%, respectively. The resin content of PU was 5% by weight

Стилі APA, Harvard, Vancouver, ISO та ін.

Çinçik, Emel, Süreyya Kocatepe, and Eda Aslan. "Comparison of the Influence of Polypropylene (PP) or Polybutylene Terephthalate (PBT)-Based Meltblown and Polyester/Polyamide-Based Hydroentangled Inner Layers on the Sound and Thermal Insulation Properties of Layered Nonwoven Composite Structures." Polymers 17, no. 1 (2025): 101. https://doi.org/10.3390/polym17010101.

Повний текст джерела

Анотація:

Thermal and sound insulation play a vital role in today’s world, and nonwoven composite structures including microfiber layers provide efficient solutions for addressing these demands. In this study, the sound and thermal insulation properties of nonwoven composite structures, including single-layer meltblown, multilayer meltblown, hydroentangled, and nanofiber nonwoven inner layers, were compared statistically by using Design Expert 13 software. The inner layer type and outer layer type of the composite structures were considered as independent variables, and thickness, bulk density, air perm

Стилі APA, Harvard, Vancouver, ISO та ін.

Tsakova, Vessela, Svetlozar Ivanov, Ulrich Lange, Aneliya Stoyanova, Vladimir Lyutov, and Vladimir M. Mirsky. "Electroanalytical applications of nanocomposites from conducting polymers and metallic nanoparticles prepared by layer-by-layer deposition." Pure and Applied Chemistry 83, no. 2 (2010): 345–58. http://dx.doi.org/10.1351/pac-con-10-08-01.

Повний текст джерела

Анотація:

Layer-by-layer (LbL) deposition is a convenient technique for the formation of ultra-thin nanocomposite layers containing metallic nanoparticles (NPs) and conducting polymers (CPs). The advantages of this approach for producing composite layers suitable for electroanalytical applications are discussed. Examples of electroanalytical applications of LbL-deposited composites are presented. Composite layers consisting of polyaniline (PANI) and Pd NPs are used for hydrazine oxidation. The PANI–Au NPs system is applied for dopamine (DA) and uric acid (UA) oxidation.

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Zejun, Guangming Lu, Dayu Zhou, Guangjie Huang, and Yu Cao. "Effects of the Number of Layers and Thickness Ratio on the Impact Fracture Behavior of AA6061/AA7075 Laminated Metal Composites." Crystals 14, no. 1 (2023): 44. http://dx.doi.org/10.3390/cryst14010044.

Повний текст джерела

Анотація:

The initial thickness ratio and number of layers of dissimilar metal components greatly influence the impact performance of laminated metal composites. In this paper, positive and lateral impact tests of 5-layer composite sheets with thickness ratios of 3:1, 1.35:1, and 1:2 and 80-layer composite sheets prepared by ARB (accumulative roll bonding) were conducted to study the influences of the thickness ratio and layer number on the impact fracture behavior of composite sheets. The results showed that the higher the proportion of AA7075, the higher the bending strength of the AA6061/AA7075 lamin

Стилі APA, Harvard, Vancouver, ISO та ін.

Sujon, Abu Shaid, Tahamir Hasan Supto, Fahim Shariar, Md Mushfiqur Rahman Pallab, Mohammad Zoynal Abedin, and Mohammad Ahsan Habib. "Fabrication and Experimental Investigation on Tensile and Flexural Properties for Different Stacking Sequence of Jute and Carbon Fiber Reinforced Epoxy Composite." Key Engineering Materials 858 (August 2020): 72–77. http://dx.doi.org/10.4028/www.scientific.net/kem.858.72.

Повний текст джерела

Анотація:

The consequence of placing a different layer of jute and carbon fiber in different position inside the composite has been experimentally investigated. Six layers of woven unidirectional jute fiber and four-layer of carbon fiber has been used with five different stacking sequences in this study. Vacuum Assisted Resin Infusion (VARI) technology has been used for the manufacturing of the composite. After analyzing the results of the tensile and flexural test of the composites, it shows that the stacking sequence has a significant effect on those properties of the composites. Tensile strength of t

Стилі APA, Harvard, Vancouver, ISO та ін.

Bouchikhi, Ahmed, Abderrahmane Bakkali, and Mustapha Ouardouz. "Prediction of the macroscopic behavior of multi-layered elastic composites." MATEC Web of Conferences 360 (2022): 00011. http://dx.doi.org/10.1051/matecconf/202236000011.

Повний текст джерела

Анотація:

In this work, elastic fiber reinforced composite materials consisting of several layers are considered. Each layer is assumed to be a unidirectional fiber reinforced composite. The interface between layers is assumed to be perfect, which means the displacement and the traction through interfaces are continuous. To predict the overall behavior of the considered composite a two step homogenization procedure is considered. In the first step, effective properties of fiber reinforced layers are predicted based on the Mori-Tanaka micromechanical model and in the second one, a general matrix method i

Стилі APA, Harvard, Vancouver, ISO та ін.

Santo, Loredana, Fabrizio Quadrini, and Denise Bellisario. "Multilayered Composite Plates with Shape Memory Properties." Key Engineering Materials 699 (July 2016): 1–7. http://dx.doi.org/10.4028/www.scientific.net/kem.699.1.

Повний текст джерела

Анотація:

In this study, multilayered composite plates with shape memory properties were produced: carbon fibers prepreg are alternated with layers of shape memory epoxy powder obtaining composite with different number of layers. The differences in the load exerted during shape recovery, and percentage and time of recovery of the composites as a function of layers number have been evaluated. In particular, the actuation load and the shape recovery percentage were measured after a V-shape memorizing step of the composites. The experimental results are very promising, showing that such multilayers can suc

Стилі APA, Harvard, Vancouver, ISO та ін.

Zeleniuc, Octavia, Mohammad Hassan Mazaherifar, Camelia Coșereanu, and Andrei Suciu. "Date-Palm-Based Sustainable Hybrid Composite with Cotton and Kevlar Fibre Participation." Applied Sciences 14, no. 3 (2024): 1008. http://dx.doi.org/10.3390/app14031008.

Повний текст джерела

Анотація:

This research aims to evaluate the physical and mechanical performance of three types of hybrid composites made of date palm (Phoenix dactylifera L.) (DP), additional layers of cotton (DP/C) and Kevlar fibres (DP/K). The fibres were formed into flat sheets and employed as reinforcement layers embedded in a polyester matrix. Three-layer and five-layer hybrid composites were created using the hand layup method. The layers have alternative longitudinal–transversal orientation. The composites were investigated for density, thickness swelling (TS), water absorption (WA), flexural strength and modul

Стилі APA, Harvard, Vancouver, ISO та ін.

Yao, Yue Fei, Shan Li, and Ya Qin Fu. "Sound Insulation Provided by PET Fabric/PVC Composite Materials." Advanced Materials Research 450-451 (January 2012): 387–91. http://dx.doi.org/10.4028/www.scientific.net/amr.450-451.387.

Повний текст джерела

Анотація:

Single layer PET Fabric/polyvinyl chloride (PVC) composite materials and double layers PET fabric/polyvinyl chloride (PVC) composite materials with super thin thickness, lightweight, flexible and high strength were manufactured by means of the infusion technology under normal pressure. The sound insulation performance of these novel materials was evaluated with a two-channel acoustic analyzer. The structure and mechanical properties were investigated by mechanical tests and SEM observation. The results show that for the small surface density the double layers composite has better sound insulat

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Composite layers"

Lee, James Jin-Wu. "Fracture of brittle layers joined with high elastic modulus composite." College Park, Md. : University of Maryland, 2007. http://hdl.handle.net/1903/6804.

Повний текст джерела

Анотація:

Thesis (Ph. D.) -- University of Maryland, College Park, 2007.<br>Thesis research directed by: Material Science and Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

Стилі APA, Harvard, Vancouver, ISO та ін.

Aleknavičius, Aidas. "Investigation of composite laser active elements with thin doped layers." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130919_161151-74601.

Повний текст джерела

Анотація:

The aim of this PhD thesis was to investigate the concept and application abilities of a proposed composite laser element finding factors that limit performance of such laser element. In this work a composite laser element was proposed which combines decent properties of various laser elements. Nevertheless, experiments showed that such element has no advantage over a widely used rod type active laser elements. In order to explain the nature of induced optical aberrations, theoretical models describing optical, thermo-optical and thermo-mechanical properties of active medium were developed and

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Sangjin. "Structure-Property Relationships in Composite Layers Polymeric Film/Foam Systems." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1473444646138984.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hardwick, S. T. "The origins and properties of transcrystalline layers in thermoplastics composites." Thesis, Brunel University, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379414.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ichkitidze, L. P., V. M. Podgaetsky, S. V. Selishchev, E. V. Blagov, V. A. Galperin, and Yu P. Shaman. "Laser Stimulation the Electroconductivity of Composite Layers with Multiwalled Carbon Nanotubes." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35631.

Повний текст джерела

Анотація:

Electroconductivity laser stimulation (irradiation) of composite layers based on carboxymethyl cellu-lose (CMC) and multiwalled carbon nanotubes (MWCNT) has been researched. The layers were deposited on the following substrates: flexible such as polyimide, polyester, aluminum foil paper, cotton fabric and shop paper (~80 g/m2]; hard substrates such as Si/SiΟ2 and cover glass. The conductivity of layers with thickness 0.5 10 μm was improved more on 500 % /(W/cm2) after laser stimulation (wavelength 970 nm, emission specific power PS~0.051 W/cm2, concentration C~0.05 wt.% MWCNT). When you are

Стилі APA, Harvard, Vancouver, ISO та ін.

Mitchell, John Anthony. "The effects of embedded piezoelectric layers in composite cylinders and applications." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06232009-063032/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Bin. "Local delamination failure of thin material layers." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/25128.

Повний текст джерела

Анотація:

Thin material layers have found various applications with various roles of functions, such as in fibre reinforced laminated composite materials, in integrated electronic circuits, in thermal barrier coating material system, and etc. Interface delamination is a major failure mode due to either residual stress or applied load, or both. Over the past several decades, extensive research works have been done on this subject; however, there are still uncertainties and unsolved problems. This thesis presents the new developed analytical studies on local delamination failure of thin material layers. F

Стилі APA, Harvard, Vancouver, ISO та ін.

Kusumawati, Yuly. "Oxide and composite electron transport layers for efficient dye-sensitized solar cells." Thesis, Paris 6, 2015. http://www.theses.fr/2015PA066240/document.

Повний текст джерела

Анотація:

Trois types des ETLs ont été développés et étudiés dans cette travaille comme une photoélectrode dans la cellule solaire à colorant (DSSC). Ils sont composés de (1) deux types de nanoparticules de TiO2-brookite, (2) le composite d'anatase et graphène et (3) la nanoparticule de ZnO qui a nanobâtonnet structure, respectivement. Toutes photoélectrodes sont préparées par le technique « doctor blade ». La morphologie des photoélectrodes ont été caractérisées par microscopie électronique à transmission (MET) et microscopie électronique à balayage (MEB). Les épaisseurs de couche sont mesurées en util

Стилі APA, Harvard, Vancouver, ISO та ін.

Navale, Kunal. "FINITE ELEMENT SIMULATION OF REPAIR OF DELAMINATED COMPOSITE STRUCTURES USING PIEZOELECTRIC LAYERS." Master's thesis, University of Central Florida, 2005. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3119.

Повний текст джерела

Анотація:

Damage in composite material fabricated aerospace, aeronautical, mechanical, civil and offshore structures often results from factors such as fatigue, corrosion and accidents. Such damage when left unattended can grow at an alarming rate due to the singularity of the stress and strain in the vicinity of the damage. It can lead to increase in the vibration level, reduction in the load carrying capacity, deterioration in the normal performance of the component and even catastrophic failure. In most conditions, the service life of damaged components is extended with repair instead of immediate re

Стилі APA, Harvard, Vancouver, ISO та ін.

Bykov, P. A., T. A. Chernysheva, and L. I. Kobeleva. "Surface layers by wear tests of particulate metal matrix composites." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20526.

Повний текст джерела

Анотація:

The dry sliding wear behaviour of varying weight fraction of SiC particles reinforced AK12M2MgN aluminum alloy metal matrix composites (MMCs) fabricated by a vortex method was investigated using a pin-on-disk tester CETR UMT. The effect of SiC particle content on the friction coefficient and wear resistance has been evaluated. The formation on friction surface of mechanical mixed layers consisting of debris and fragmented SiC particles was indentified using a optical and a scanning electron microscopes. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handl

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Composite layers"

Dimitris, Saravanos, Chamis C. C, and United States. National Aeronautics and Space Administration., eds. Optimal synthesis of hot composite laminates with interphase layers. National Aeronautics and Space Administration, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

C, Chamis C., and United States. National Aeronautics and Space Administration., eds. The effects of interply damping layers on the dynamic response of composite structures. National Aeronautics and Space Administration, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Siegel, R. Temperature distribution in a composite of opaque and semitransparent spectral layers. American Institute of Aeronautics and Astronautics, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Siegel, R. Temperature distribution in a composite of opaque and semitransparent spectral layers. American Institute of Aeronautics and Astronautics, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

K, Binienda Wieslaw, Pindera M. J. 1951-, Lewis Research Center, and United States. National Aeronautics and Space Administration., eds. Frictionless contact of multilayered composite half planes containing layers with complex Eigenvalues. National Aeronautics and Space Administration, Lewis Research Center, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

C, Chamis C., Brown Henry Clifton, and United States. National Aeronautics and Space Administration., eds. Parametric studies to determine the effect of compliant layers on metal matrix composite systems. National Aeronautics and Space Administration, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yu, Yi-Yuan. Vibrations of Elastic Plates: Linear and Nonlinear Dynamical Modeling of Sandwiches, Laminated Composites, and Piezoelectric Layers. Springer New York, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

1935-, Wightman James P., and Langley Research Center. Materials Division., eds. Fracture surface analysis in composite and titanium bonding: Semi-annual report. Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kędziora, Piotr. Optymalne projektowanie struktur kompozytowych z warstwami piezoelektrycznymi: Optimal design of composite structures with piezoelectric layers = Optimale Projektierung der Verbundwerkstoffstrukturen mit piezoelektrischen Schichten. Wydawnictwo PK, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Center, Lewis Research, ed. Thermal and mechanical durability of graphite-fiber-reinforced PMR-15 composites. National Aeronautics and Space Administration, Lewis Research Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Composite layers"

Wei, Li. "Composite and Recurrent Layers." In C++ Template Metaprogramming in Practice. Auerbach Publications, 2020. http://dx.doi.org/10.1201/9781003102311-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhou, Xiaodong, Tienan Wang, and Bowen Xu. "Experimental Investigation on the Factors Influencing the Shear Strength of Loess-Mudstone Composite Layer." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2532-2_25.

Повний текст джерела

Анотація:

AbstractGeological slopes are often disturbed by external engineering, leading changes of the upper moisture content and dry density in loess-mudstone composite layer. It directly affects the shear strength of the loess-mudstone composite layer interface. In order to explore the influence of the upper loess moisture content and dry density on the shear strength of the loess-mudstone composite layer, taking the cutting slope in a test base in Shaanxi Province as the engineering background, different loess moisture contents (10%, 13%, 16%, 19%) and dry densities (1.4, 1.45, 1.5, 1.55 g/cm3) are

Стилі APA, Harvard, Vancouver, ISO та ін.

Mittelstedt, Christian. "Strength Hypotheses for Unidirectionally Fiber-Reinforced Laminate Layers." In Mechanics of Composite Structures. Springer Berlin Heidelberg, 2025. https://doi.org/10.1007/978-3-662-70788-3_9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rechak, S., and C. T. Sun. "Optimal Use of Adhesive Layers in Reducing Impact Damage in Composite Laminates." In Composite Structures 4. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3457-3_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sanjay Kumar, S. M., and S. Tilak kumar. "Mechanical Properties of Sandwiched Layers of Natural Fibers of Sisal and Jute for Automotive Application." In Structural Composite Materials. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5982-2_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rezende, Gustavo L., Helena Carolina Martins Vargas, Bernard Moussian, and Ephraim Cohen. "Composite Eggshell Matrices: Chorionic Layers and Sub-chorionic Cuticular Envelopes." In Extracellular Composite Matrices in Arthropods. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-40740-1_9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ye, Jianqiao. "Axisymmetric Vibration, Buckling and Bending of Laminated Plates with Transversely Isotropic Layers." In Laminated Composite Plates and Shells. Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-0095-9_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wei, Chang Jia, Ong Zhen Liang, and Ehsan Nikbakht Jarghouyeh. "Experimental Investigation of Effectiveness of FRP Composite Repair System on Offshore Pipelines Subjected to Pitting Corrosion Under Axial Compressive Load." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1748-8_17.

Повний текст джерела

Анотація:

AbstractThe application of FRP composite is quite well demonstrated in strengthening on RC structures but on strengthening of steel structures is still being investigated by many researchers. The aggressive marine environment can cause corrosion to the offshore pipelines which would affect the structural performance such as pitting corrosion which could be considered as the most destructive corrosion was simulated in this research. This study had attempted to carry out experimental investigation of effectiveness of FRP composite repair system on offshore pipelines subjected to pitting corrosio

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Jian Bin, Ding Fan, Jing Jie Dai, and Yao Ning Sun. "TiC/Ti Composite Layers Fabricated by Laser Surface Alloying." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1148.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ichkitidze, Levan, Alexander Gerasimenko, Dmitry Telyshev, et al. "Layers of Composite Nanomaterials as Prototype of a Tensoresistor Sensor." In Springer Proceedings in Physics. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-19894-7_40.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Composite layers"

Ravichandran, Dharneedar, and Kenan Song. "One-Step 3D Printed Layers Along With xy-in Plane Directions for Enhanced Multifunctional Nanocomposites." In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85056.

Повний текст джерела

Анотація:

Abstract Composite and hybrid materials displaying layered structures have broad applications in structural composites, fire retardant barriers, tissue scaffolds, and microelectronics. Inspired by biosystems, in this study, we explore the invention of a new 3D printing principle that can produce layered structures similar to those in trees, overcoming the bottleneck in additive manufacturing to include multi-materials. We use polyvinyl alcohol (PVA) and carbon nanotubes (CNTs) as material examples for producing alternating layers. With the unique 3D printing platform, Multiphase Direct Ink Wri

Стилі APA, Harvard, Vancouver, ISO та ін.

Safin, R., and R. Fahrutdinov. "WOOD-POLYMER COMPOSITE MATERIAL." In Ecological and resource-saving technologies in science and technology. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2022. http://dx.doi.org/10.34220/erstst2021_197-201.

Повний текст джерела

Анотація:

The PDM Department has developed a layered wood-polymer composite material (DPCM) containing surface layers based on thermomodified wood and a thermoplastic polymer as a filler, and an inner layer of polyurethane foam and wood particles as a binding matrix. The technology of production of the developed material is proposed. The purpose of the work is to create a layered wood-polymer thermal insulation material and technology for its production. The task is to develop a technology for obtaining a wood-polymer thermal insulation material with improved operational properties, high thermophysical

Стилі APA, Harvard, Vancouver, ISO та ін.

Yazdani, Sasan, Süleyman Tekeli, and Elina Akbarzadeh-CH. "Fabrication of Multi-Layer 316L-TiC Composite by Selective Laser Melting Additive Manufacturing." In 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-3oaz7a.

Повний текст джерела

Анотація:

In this study, the microstructure and wear behavior of multilayer 316L stainless steel/TiC composite fabricated using selective laser melting (SLM) additive manufacturing were investigated. The produced samples consisted of three layers: 316L, 316L-5TiC, and 316L-10TiC (wt%). Microstructural evaluations revealed a homogeneous distribution of TiC particles in the matrix of the composite layers, with no cracks observed at the interfaces between layers, indicating a robust bond between the layers. Wear tests showed that the incorporation of TiC particles enhanced wear resistance, with the composi

Стилі APA, Harvard, Vancouver, ISO та ін.

Kamina, Tetsuo, Tomoyuki Aotani, and Hidehiko Masuhara. "A core calculus of composite layers." In the 12th workshop. ACM Press, 2013. http://dx.doi.org/10.1145/2451598.2451601.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Andrianov, Igor V., Vladyslav V. Danishevs’kyy, Dieter Weichert, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "Boundary Layers in Fibre Composite Materials." In NUMERICAL ANALYSIS AND APPLIED MATHEMATICS: International Conference on Numerical Analysis and Applied Mathematics 2009: Volume 1 and Volume 2. AIP, 2009. http://dx.doi.org/10.1063/1.3241612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sheyka, Michael P., Jung J. Kim, Arife B. Altunc, and Mahmoud M. Reda Taha. "A Reliability-Based Energy Approach for Design Optimization of Blast Resistant Composites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64179.

Повний текст джерела

Анотація:

In the last three decades, significant efforts have been conducted for developing blast-resistant composites. Some of these efforts were focused on enhancing the stiffness and the strength of the composite materials. Here, an energy approach aiming at maximizing energy absorption in composite layers is used. The optimization is based on combining two materials A and B. While material A is strong, material B is ductile, thus a mechanism of energy reflection and absorption is developed within the composite layers. In this study, a simplified dynamic model is first developed to simulate the elast

Стилі APA, Harvard, Vancouver, ISO та ін.

Hamadiche, Mahmoud, and Natalya Kizilova. "Flow Interaction With Composite Wall." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93880.

Повний текст джерела

Анотація:

Stability of the steady flow of a viscous liquid through the thick-walled multilayered viscoelastic tubes with different rheological properties of the layers for no stress boundary conditions at the outer surface of the tube is investigated. The eigen values of the system are found. The influence of the material parameters of the layers and the Reynolds number on the spatial and temporal amplification rate of the most unstable mode is investigated. It is shown that the system can be stabilized by increasing the shear modules of the inner and middle layers. The temporal amplification rate signi

Стилі APA, Harvard, Vancouver, ISO та ін.

Ghiasi, Hossein, Damiano Pasini, and Larry Lessard. "Layer Separation for Optimization of Composite Laminates." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-50106.

Повний текст джерела

Анотація:

The excellent mechanical properties of laminated composites cannot be exploited without a careful design of stacking sequence of the layers. An important variable in the search of the optimum stacking sequence is the number of layers. The larger is this number, the harder as well as longer is the search for an optimal solution. To tackle efficiently such a variable-dimensional problem, we introduce here a multi-level optimization technique. The proposed method, called Layer Separation (LS), increases or decreases the number of layers by gradually separating a layer into two, or by merging two

Стилі APA, Harvard, Vancouver, ISO та ін.

Puiroux, Nicolas, Marc Prat, Michel Quintard, and Fabrice Laturelle. "Macro-Scale Non-Equilibrium Heat Transfer in Ablative Layer Composite Layers." In 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. American Institute of Aeronautics and Astronautics, 2002. http://dx.doi.org/10.2514/6.2002-3336.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kozlov, Alexei A., James B. Oliver, John Spaulding, et al. "Striated composite layers for high-fluence applications." In Laser-Induced Damage in Optical Materials 2022, edited by Christopher W. Carr, Detlev Ristau, and Carmen S. Menoni. SPIE, 2022. http://dx.doi.org/10.1117/12.2642334.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Composite layers"

Barton, Oscar, Ratcliffe Jr., and Colin P. Fundamental Frequency of a Composite Sandwich Plate Containing Woven Layers. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada359126.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Raja, Krishnan, and Ravi subramanian. COLD SPRAY COATED METAL MATRIX NANO-COMPOSITE SURFACE LAYERS ON INCONEL 617. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1868153.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Perez-Rivera, Anthony, Jonathan Trovillion, Peter Stynoski, and Jeffrey Ryan. Simulated barge impacts on fiber-reinforced polymers (FRP) composite sandwich panels : dynamic finite element analysis (FEA) to develop force time histories to be used on experimental testing. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48080.

Повний текст джерела

Анотація:

The purpose of this study is to evaluate the dynamic response of fiber-reinforced polymer (FRP) composite sandwich panels subjected to typical barge impact masses and velocities to develop force time histories that can be used in controlled experimental testing. Dynamic analyses were performed on FRP composite sandwich panels using the finite element method software Abaqus/Explicit. The “traction-separation” law in the Abaqus software is used to define the cohesive surface interaction properties to evaluate the damage between FRP composite laminate layers as well as the core separation within

Стилі APA, Harvard, Vancouver, ISO та ін.

Saiwan, Chintana. Mesostructural ultra thin silica film formation through admicellar technique. Chulalongkorn University, 2003. https://doi.org/10.58837/chula.res.2003.78.

Повний текст джерела

Анотація:

Thin silica film formation from adsolubilization of inorganic silica precursors, letra-n-butoxysilane (TBOS) and tetraethyl orthosilicate (TBOS) in admicellar polymerization were studies. Cetyltrimethylammonium bromide (CTAB) at 700 uM and octyl phenol ethoxylate or Triton X-100 at 200 uM were used as surfactant templates for adsolubilizates TBOS and TBOS respectively. For the TBOS/CTAB system, the atomic force microscopy (AFM) topographic images showed fibers, hemispheres and flat layers existing along with increase of surface coverge on the mica surface as the TBOS feed concentration was inc

Стилі APA, Harvard, Vancouver, ISO та ін.

Lasko, Kristofer, Francis O’Neill, and Elena Sava. Automated mapping of land cover type within international heterogenous landscapes using Sentinel-2 imagery with ancillary geospatial data. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/49367.

Повний текст джерела

Анотація:

A near-global framework for automated training data generation and land cover classification using shallow machine learning with low-density time series imagery does not exist. This study presents a methodology to map nine-class, six-class, and five-class land cover using two dates of a Sentinel-2 granule across seven international sites. The approach uses a series of spectral, textural, and distance decision functions combined with modified ancillary layers to create binary masks from which to generate a balanced set of training data applied to a random forest classifier. For the land cover m

Стилі APA, Harvard, Vancouver, ISO та ін.

Gill. L51675 Effects of Weldment Property Variations on the Behavior of Line Pipe. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0010133.

Повний текст джерела

Анотація:

A steel weldment is a composite of zones or layers of different microstructures that possess different material properties. The zones include the base metal (or the sections of pipe), the weld metal, and a complex heat-affected zone (HAZ) of base metal that has been exposed to a variety of thermal cycles resulting in varying microstructures. The material properties of primary concern with respect to the mechanical behavior of the pipe are the stress-strain response (the constitutive properties) and the resistance to initiation and propagation of cracks or tears in the presence of a crack, notc

Стилі APA, Harvard, Vancouver, ISO та ін.

Datta, S. K., A. H. Shah, W. Karunasena, P. Olsson, and A. Bostroem. Wave Propagation in the Presence of Interface Layers in Composites. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada225078.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Meznarich, Huei K., James S. Lachut, Stacey D. Bolling, Tom M. Ely, and Gary A. Cooke. Investigation of Tank 241-AW-104 Composite Floating Layer. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1487099.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Meznarich, H. K., S. D. Bolling, J. S. Lachut, and G. A. Cooke. Investigation of Tank 241-AW-104 Composite Floating Layer. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1423898.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Joshi, S. P., and W. S. Chan. Damage-Survivable and Damage-Tolerant Laminated Composites with Optimally Placed Piezoelectric Layers. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada260879.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!