Готові списки джерел за темами / Compressor machine

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Compressor machine"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Compressor machine".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Compressor machine"

Stosic, N., I. K. Smith, and A. Kovacevic. "Opportunities for innovation with screw compressors." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 217, no. 3 (2003): 157–70. http://dx.doi.org/10.1177/095440890321700301.

Повний текст джерела

Анотація:

It is falsely considered, but widely accepted, that little can now be done to improve the screw compressor process and design. Screw compressors are indeed a mature product today and they form a highly competitive market, especially the oil-flooded air compressor. However, the simultaneous efforts of a large number of manufacturers have resulted in a compact and efficient oil-flooded screw compressor machine. Even small design details now tell the achievement of better compressor efficiency, and there is still some place left for implementation of new methods and procedures that will undoubted

Стилі APA, Harvard, Vancouver, ISO та ін.

Trokoz, Ya Ye, P. O. Barabash, P. P. Kudelya, and O. B. Golubev. "Development and research of refrigeration cycle with biagent jet compressor." KPI Science News, no. 4 (February 14, 2022): 77–82. http://dx.doi.org/10.20535/kpisn.2021.4.252054.

Повний текст джерела

Анотація:

Background. Currently, in the cycles of steam-ejector refrigeration machines (SERM) are used monoagent jet compressors, the working body in which is water. Despite their low efficiency, SERM have a number of advantages over refrigeration machines that usemechanical compressors: low cost, ease of manufacture and reliability. The use of SERM is largely limited by the inability of these installations to reach temperatures below 0 °C. This limitation can be overcome by applying a fundamentally new steam compressioncycle using a bioagent (water-freon) jet compressor (BAJC).Objective. The purpose of

Стилі APA, Harvard, Vancouver, ISO та ін.

Ramali, Muhammad Nazri, Tomi Abdilah, and Irwan Suyadi. "Analisa kerusakan bearing mesin kompresor sekrup boge tipe bs 102 nr 1023728." JURNAL PERSEGI BULAT 2, no. 1 (2023): 31–38. http://dx.doi.org/10.36490/jurnalpersegibulat.v2i1.933.

Повний текст джерела

Анотація:

A compressor is a machine for compressing air or gas. Air compressors usually suck airfrom the atmosphere. However, there are also those who suck in air or gas at a pressurehigher than atmospheric pressure. In this case the compressor works as a booster. On theother hand, there are also compressors that suck in gas at a lower pressure than atmosphericpressure. One of the problems with screw type compressor machines is overload, where thepower required by the compressor is less than the normal requirement, which forces themachine to work more than its capacity limits. In the end, this results i

Стилі APA, Harvard, Vancouver, ISO та ін.

Danilishin, A. M., and Y. V. Kozhukhov. "Centrifugal Compressors Gas-Dynamic Characteristics Influence on the Refrigerating Machines Efficiency." Problems of the Regional Energetics, no. 2(58) (May 2023): 72–80. http://dx.doi.org/10.52254/1857-0070.2023.2-58-07.

Повний текст джерела

Анотація:

The article is devoted to the study R134a refrigerating machine efficiency and consisting of a centrifugal compressor, a condenser, a temperature-regulating valve and an evaporator. The main purpose of the work is to analyze the centrifugal compressor gas dynamic characteristics effect on the refrigeration machine vapor-compression cycle efficiency. This goal is achieved through the study by actual working process numerical experiment in the refrigeration machine centrifugal compressor with an idealized process for other elements. The object of the study are the refrigeration machine character

Стилі APA, Harvard, Vancouver, ISO та ін.

Francesconi, Marco, Arianna Baldinelli, Luca Sani, and Marco Antonelli. "Experimental Characterization of Reversible Oil-Flooded Twin-Screw Compressor/Dry Expander for a Micro-Scale Compressed Air Energy Storage System." Energies 18, no. 2 (2025): 320. https://doi.org/10.3390/en18020320.

Повний текст джерела

Анотація:

The reversible use of a volumetric machine as a compressor and expander shows potential for micro-scale compressed air energy storage systems because of lower investment costs and higher operational flexibility. This paper investigates experimentally the reversible use of a 3 kW oil-flooded twin-screw compressor as an expander for a micro-scale compressed air energy storage system to assess its operation while minimizing operating costs and the need for adjustments. As a result, the oil injection was only implemented in the compressor operation since the oil takes part in the compression proce

Стилі APA, Harvard, Vancouver, ISO та ін.

Bekirova, A. A. "Analysis of the frictional processes in piston machines." Azerbaijan Oil Industry, no. 04 (April 15, 2024): 54–60. http://dx.doi.org/10.37474/0365-8554/2024-04-54-60.

Повний текст джерела

Анотація:

The durable and reliable work of piston compressors and pumps used in the oil and gas industry has great importance for practice. Investigation of complex problems with respect to mechanical and thermodynamic phenomena in compressors and pumps gives the opportunity to solve the problems of increasing the durability of oil and gas exploitation and transportation. Increasing the efficiency and durability of the compressor-pump stations directly depends on the correct calculations and designing of the different elements and mechanical parameters of piston machines. The problem of determining the

Стилі APA, Harvard, Vancouver, ISO та ін.

Jeon, Seung Hyun, Sarang Yoo, Yoon-Sik Yoo, and Il-Woo Lee. "ML- and LSTM-Based Radiator Predictive Maintenance for Energy Saving in Compressed Air Systems." Energies 17, no. 6 (2024): 1428. http://dx.doi.org/10.3390/en17061428.

Повний текст джерела

Анотація:

Air compressors are widely used in industrial fields. Compressed air systems aggregate air flows and then supply them to places of demand. These huge systems consume a significant amount of energy and generate heat internally. Machine components in compressed air systems are vulnerable to heat, and, in particular, a radiator to cool the heat of the overall air compressor is the core component. Dirty radiators increase energy consumption due to anomalous cooling. To reduce the energy consumption of air compressors, this mechanism emphasizes a machine learning-based radiator fault detection, usi

Стилі APA, Harvard, Vancouver, ISO та ін.

Yusha, V. L. "Theoretical assessment of the effectiveness of application single-stage long-stroke piston compressors in refrigeration and hydrocarbon gas liquefaction systems." Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering 8, no. 1 (2024): 17–24. http://dx.doi.org/10.25206/2588-0373-2024-8-1-17-24.

Повний текст джерела

Анотація:

The analysis of the main modern technologies for obtaining low temperatures and liquefying hydrocarbons using compressor equipment is presented and the most significant results of research in the field of low-flow compressors based on low-speed, long-stroke piston stages are presented. A method for calculating an ideal vapor-compression refrigeration cycle is presented, adapted to the object under consideration, taking into account the possibility of implementing quasi-isothermal compression. A comparative computational analysis of temperature conditions and thermodynamic efficiency of a two-s

Стилі APA, Harvard, Vancouver, ISO та ін.

Ojariafe, G. A. Bashir M. E. "Design and Fabrication of Compressed Air Storage using Spent Refrigerant Cylinder." Advances in Engineering Design Technology 5, no. 2 (2023): 55–64. https://doi.org/10.5281/zenodo.8150676.

Повний текст джерела

Анотація:

<em>The design and fabrication of compressed air storage system was carried out using recycled refrigerator compressor and refrigerant cylinder. Conventional air compressors used in vulcanizing employ environmentally unfriendly fossil fuel and or electricity which can be epileptic in supply in Nigeria. Therefore, this present research aimed to use alternative materials such as recycled refrigerant compressors and cylinders to produce a cheap DC-operated air compressing and storage unit. In doing so, two concepts were significant considered. The first concept was the use of a refrigerant compre

Стилі APA, Harvard, Vancouver, ISO та ін.

Tri Haryono, Deni Arif Rahman Deni, Subekti Subekti, and Abdul Hamid. "Using a frequency vibration approach, examine the impact of screw rotor clearance on the screw housing in an 11kW compressor." JTTM : Jurnal Terapan Teknik Mesin 5, no. 1 (2024): 1–13. http://dx.doi.org/10.37373/jttm.v5i1.405.

Повний текст джерела

Анотація:

A screw compressor is one of the industrial machines needed for productivity and use in today's production. Industrial machines generally use pneumatic systems with the help of compressed air supplied by a compressor machine. The compressor working system must receive very special attention. Maintenance and prevention of damage to air screw compressor machines is very necessary, especially maintenance and prevention of damage to rotary screw air compressors. Problems that often occur with the shaft will result in reduced air supply flow or unstable air pressure resulting in disruption of the p

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Compressor machine"

Ibsaine, Rabah. "Étude d’un système tritherme intégrant une compression thermique originale, destiné au marché du chauffage résidentiel." Thesis, Pau, 2015. http://www.theses.fr/2015PAUU3030/document.

Повний текст джерела

Анотація:

L’innovation technologique dans les filières énergétiques est une manière pertinente de réaliser des économies d’énergie et de répondre aux préoccupations environnementales. Le chauffage représente la principale consommation d’énergie dans le secteur de l’habitat en France et contribue fortement aux rejets de gaz à effet de serre. Un nouveau conceptde compresseur thermique a été développé par la société boostHEAT. Il est destiné à remplacer le compresseur mécanique conventionnel d’un système de pompe à chaleur au CO2 pour former un système “tritherme”. Ce compresseur thermique est constitué d’

Стилі APA, Harvard, Vancouver, ISO та ін.

Якимів, Д. С. "Дослідження одноступеневої холодильної машини з різними типами компресорів". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86616.

Повний текст джерела

Анотація:

У роботі виконано розрахунок параметрів у вузлових точках циклу одноступеневої холодильної машини, в результаті чого визначено необхідну продуктивність компресора. Потім виконано порівняльний аналіз поршневого, гвинтового та спірального компресорів за загальноприйнятою методикою та за допомогою програмного забезпечення компанії Bitzer. За результатами розрахунку і аналізу виконано підбір компресора, який найбільше задовольняє вимогам. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації холодильного обладнання та виконано розрахунок природного та штучного

Стилі APA, Harvard, Vancouver, ISO та ін.

Lapáček, Martin. "Reverzační turbokompresor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231809.

Повний текст джерела

Анотація:

This diploma thesis is dedicated to a design of a reversing turbo-compressor. The thesis is divided into several parts. The introductory part includes the relevant theory and categorization of turbomachines. The second part describes the storage system the machine is designed for. A separate chapter is devoted to other examples of possible use of this machine. The next chapter provides a detail description of modes and individual parts of the machine. The most comprehensive chapter is then devoted to the design of the compressor, turbine calculation and design of integrated gearbox. The thesis

Стилі APA, Harvard, Vancouver, ISO та ін.

Bardou, Olivier. "Sur des methodes de surveillance et de diagnostic vibratoire de machines alternativesS." Grenoble INPG, 1994. http://www.theses.fr/1994INPG0015.

Повний текст джерела

Анотація:

Le but de ce travail est d'appliquer des methodes de traitement du signal et de reconnaissance des formes pour la surveillance des machines alternatives par les vibrations. Une synthese des methodes existantes pour la surveillance vibratoire de machines simples, comme les machines tournantes, est tout d'abord developpee. Cela nous permet de degager les limites des outils classiques d'analyse. La complexite des machines alternatives justifie alors l'utilisation d'outils de traitement du signal plus adaptes a l'extraction de parametres pertinents vis a vis du caractere non-stationnaire du signal

Стилі APA, Harvard, Vancouver, ISO та ін.

Кушніров, Павло Васильович, Павел Васильевич Кушниров, Pavlo Vasylovych Kushnirov та Е. А. Сергиенко. "Повышение эффективности обработки деталей компрессоров". Thesis, Издательство СумГУ, 2008. http://essuir.sumdu.edu.ua/handle/123456789/5887.

Повний текст джерела

Анотація:

Усовершенствование технологии обработки деталей компрессоров является актуальной задачей, поскольку компрессоры – это важнейшее энергетическое оборудование машиностроительной промышленности. Цель исследований - повышение эффективности обработки детали «Цилиндр III ступени 43.42.22.019.01.00.008», входящей в состав компрессора типа ЗВШ 1,6-3/46 М3. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/5887

Стилі APA, Harvard, Vancouver, ISO та ін.

Бондаренко, Герман Андрійович, Герман Андреевич Бондаренко, Herman Andriiovych Bondarenko та І. В. Лисенко. "Оптимізація режимів роботи повітряної КС з використанням математичної моделі". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/62554.

Повний текст джерела

Анотація:

Мета роботи: розробка математичної моделі управління роботою повітряної компресорної станції промислового підприємства на змінних режимах. Задача: розробити алгоритм, програму і математичні моделі КС, призначеної для управління КС шляхом включення або ж вимкнення компресорних машин, згідно з прийнятими критеріями раціональності. Вирішити задачу для аналізу компресорної станції з будь-якими типорозмірами компресорних машин з відомим графіком навантаження станції.

Стилі APA, Harvard, Vancouver, ISO та ін.

Бурий, Андрій Сергійович, Андрей Сергеевич Бурый, Andrii Serhiiovych Buryi, Віталій Іович Симоновський, Виталий Иович Симоновский та Vitalii Iovych Symonovskyi. "Повышение вибронадежности поршневых компрессорных установок". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40551.

Повний текст джерела

Анотація:

Проблема обеспечения вибронадежности поршневых машин вследствие полигармонического характера крутящих моментов и неуравновешенности элементов валопровода представляет собой весьма трудноразрешимую задачу. Одним из основных факторов, влияющих на вибронадежность поршневых машин, являются крутильные колебания, особенно на резонансных режимах. Они, как известно, относятся к опасным динамическим нагрузкам, которые нередко приводят к аварийным повреждениям коленчатых валов, редукторов, муфт, демпферов и других элементов валопроводов поршневых машин, в частности компрессоров.

Стилі APA, Harvard, Vancouver, ISO та ін.

Козін, Віктор Миколайович, Виктор Николаевич Козин, Viktor Mykolaiovych Kozin та М. В. Заставенко. "Аналіз ефективності роботи конденсатора повітряного охолодження парокомпресійної холодильної машини". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/62418.

Повний текст джерела

Анотація:

З часом резерви розвіданих первинних ресурсів вичерпуються, кількість нафти і природного газу, з розумною ціною видобування, з кожним роком стає менше, а попит на них зростає. Крім того, останнім часом спостерігається загальна тенденція стрімкого подорожчання первинних енергоресурсів, що у свою чергу призводить до зростання цін на кінцевий продукт. Очевидно, що економія первинних енергоресурсів є невід’ємною складовою будь-якого підприємства, зокрема пов’язаного із використанням холодильної техніки.

Стилі APA, Harvard, Vancouver, ISO та ін.

Vrána, Jan. "Třírotorový lopatkový stroj pro klimatizační systém." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230158.

Повний текст джерела

Анотація:

For air cooling in aircrafts is used an air cycle machine. Recently, there is focusing on incresing efficiency of air cycle and due this are added another rotors. Design of machine with three rotors is performed in this thesis.

Стилі APA, Harvard, Vancouver, ISO та ін.

SANCHEZ, FERNANDO ZEGARRA. "COMPRESSION IGNITION OF ETHANOL-POWERED IN RAPID COMPRESSION MACHINE." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=29324@1.

Повний текст джерела

Анотація:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE EXCELENCIA ACADEMICA<br>Com o passar do tempo, a humanidade tem uma maior dependência na geração de energia, utilizada para promoção de conforto, transporte e outros. Com a finalidade de resolver este aumento de demanda, novas fontes eficientes, de preferência renováveis, estão sendo pesquisadas. O transporte é uma das atividades que tem maior dependência dos combustíveis fósseis, além de ser também um dos maiores geradores de gases de efeito estufa. É por isso, que

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Compressor machine"

Pichot, Pierre. Compressor application engineering. Gulf Pub. Co., Book Division, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Arasu, A. Valan. Turbo machines. Vikas Publishing House, 2008.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Canada. Dept. of External Affairs. Studies in Canadian export opportunities in the U.S. market: Agricultural machine parts. Dept. of External Affairs, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Affairs, Canada Dept of External. Studies in Canadian export opportunities in the U.S. market: Metalworking machinery and machine tools. External Affairs, Canada, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Canada. Dept. of External Affairs. Studies in Canadian export opportunities in the U.S. market: Metalworking machinery and machine tools. Dept. of External Affairs, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

N, Cheremisinoff Paul, ed. Pumps, compressors, fans: Pocket handbook. Technomic Pub. Co., 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Grabow, Gerd. Zur Theorie der Peripheral-Seitenkanalpumpen und -gebläse. Deutscher Verlag für Grundstoffindustrie, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

American Society of Mechanical Engineers. Compressors and exhausters: Power test codes. The Society, 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

P, Chopey Nicholas, ed. Fluid movers. 2nd ed. Chemical Engineering, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gravdahl, Jan Tommy. Compressor Surge and Rotating Stall: Modeling and Control. Springer London, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Compressor machine"

Morillo, Alfredo Hugo Valença, Paulo Roberto Gardel Kurka, and Marco Lúcio Bittencourt. "Dynamics Analysis of Reciprocating Compressor Crankshafts." In Mechanisms and Machine Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99268-6_34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Okabe, Eduardo Paiva, Jaime Hideo Izuka, and Reinhard Resch. "Analysis of Analytical Hydrodynamic Bearing Models on a Reciprocating Compressor." In Mechanisms and Machine Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99262-4_22.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zague, Leandro O., C. Hunter Cloud, Marcelo A. Miranda, and Rogerio S. Campos. "Operational Modal Analysis of a Centrifugal Compressor in Field Operation." In Mechanisms and Machine Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99268-6_32.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Colombo, Federico, Luigi Lentini, Edoardo Goti, Andrea Trivella, and Terenziano Raparelli. "Preliminary Design of a Herringbone Journal Bearing for a High-Speed Compressor." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-91179-8_46.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Holopainen, Timo P. "Self-Excited Torsional Vibrations of a Motor-Driven Reciprocating-Compressor." In Advances in Mechanism and Machine Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-45705-0_85.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Brandão, André, Joilson Rangel, and Rodolfo Melo. "Root Cause Investigation of High Frequency Structural Vibration on a High Pressure Hydrogen Compressor." In Mechanisms and Machine Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99268-6_26.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Qiao, Xiaoshuai, Chao Sun, Yanzheng Hu, and Congbin Jiang. "Research on Vibration Design of Large Compressor Foundation." In Advances in Frontier Research on Engineering Structures. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8657-4_40.

Повний текст джерела

Анотація:

AbstractThe safe operation of a compressor machine heavily relies on the proper design of its foundation. The frame-type supporting foundation is usually adopted in engineering. This paper studies the vibration design of the compressor’s foundation. Two types of finite element model for the foundation are considered, which are beam-slab element model and solid element model. By the comparative analysis of vibration mode shape and time-history dynamic calculation, it is concluded that the commonly used beam-slab element model could be unsafe for a design purpose. In contrast, the solid element

Стилі APA, Harvard, Vancouver, ISO та ін.

Yahyai, Mohamed Al, and David Mba. "Investigation of the Synchronous Response in a Back-Back Centrifugal Compressor Due to Imbalance and Seal Distortion." In Mechanisms and Machine Science. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09918-7_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sikanen, Eerik, Janne E. Heikkinen, and Jussi Sopanen. "Effect of Operational Temperature on Contact Dynamics of Shrink-Fitted Compressor Impeller Joint." In Advances in Mechanism and Machine Science. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20131-9_330.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rzadkowski, Romuald, and Artur Maurin. "Forced Vibration of Eight Mistuned Bladed Disks on a Solid Shaft—Excitation of the First Compressor Bladed Disc." In Mechanisms and Machine Science. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09918-7_31.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Compressor machine"

Welp, Alexandra, Ilyas Adaköy, and Burak Atakan. "PISTON COMPRESSOR PERFORMANCE WITH TERNARY MIXTURES: MACHINE LEARNING SURROGATE MODELS." In 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2024). ECOS 2024, 2024. http://dx.doi.org/10.52202/077185-0029.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Brun, Klaus, and Rainer Kurz. "Analysis of the Effects of Pulsations on the Operational Stability of Centrifugal Compressors in Mixed Reciprocating and Centrifugal Compressor Stations." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-50540.

Повний текст джерела

Анотація:

Mixed operation with both centrifugal and reciprocating compressors in a compression plant poses significant operational challenges as pressure pulsations and machine mismatches lead to centrifugal compressors’ instabilities or poor performance. Arrangements with reciprocating compressors placed in series with centrifugal compressors generally lead to higher suction/discharge pulsations on the centrifugal compressor than conventional parallel operation. This paper demonstrates that by properly analyzing and designing the interconnecting piping between the compressors, utilizing pulsation atten

Стилі APA, Harvard, Vancouver, ISO та ін.

Spille-Kohoff, Andreas, Farai Hetze, and Bennie Du Toit. "Transient CFD Co-Simulation of a 3D Compressor Model in its 1D System Environment." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90426.

Повний текст джерела

Анотація:

Abstract Rotary compressors such as screw compressors, roots blowers, and turbo compressors are used in industry to compress process gases, or as vacuum or backing pumps to evacuate vessels. Gas is sucked in at low-pressure side, transported and compressed by size-changing chambers (PD machines) or energy transmission from rotor to fluid (turbo machinery), and released at high-pressure side. In expanders or turbines, flow direction is from high to low pressure side to gain energy from pressurized gases. The 3D CFD simulation of such compressors/expanders is complex and time-consuming due to it

Стилі APA, Harvard, Vancouver, ISO та ін.

D’Orsi, Nicholas C., Sharon E. Wight, and Tsukasa Yoshinaka. "Design Point Performance Trends for Water Vapor Compressors." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/pid-25605.

Повний текст джерела

Анотація:

Abstract A design study of various water vapor compressor configurations — including single and multistage centrifugal compressors and multistage axial compressors — is used to determine geometry and performance trends as a function of design speed, compressor configuration, and intercooling method. The intercooled multistage centrifugal machines led to the lowest required power levels, though the large outer diameter of these machines and the addition of an intercooler may reduce their appeal. The non-intercooled multistage axial configurations offered high design point performance and a much

Стилі APA, Harvard, Vancouver, ISO та ін.

Goryachikh, Vadim, Fahad Alghamdi, and Abdulrahman Takrouni. "Computerized Performance Monitoring System for Turboexpander Brake Compressor." In International Petroleum Technology Conference. IPTC, 2022. http://dx.doi.org/10.2523/iptc-22602-ms.

Повний текст джерела

Анотація:

Extended Abstract Natural gas liquid (NGL) production facilities, typically, utilize turbo-expander-brake compressor (TE) to generate cold for C2+ separation from the natural gas by isentropic expansion of feed stream and use energy generated by expansion to compress residue gas. Experience shows that during operational phase TE can exposed to operation outside of design window that may lead to machine integrity loss and consequent impact on production. At the same time, there is a lack of performance indicators that help operator to monitor operating window of the machine and proactively iden

Стилі APA, Harvard, Vancouver, ISO та ін.

Stosic, Nikola, Ian K. Smith, Ahmed Kovacevic, and E. Mujic. "Development of Water Lubricated Compressor-Expander for Fuel Cell Application." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-37437.

Повний текст джерела

Анотація:

Fuel cells, currently being developed for automotive and stationary applications, require a supply of pressurized air at about 3 bars abs. This is expelled in the reaction products, mainly as water steam and nitrogen, at approximately 100 °C. The power input required to compress the air is typically 20–25% of the cell electrical output. Hence, for the cell efficiency to be acceptable and to recover water conveniently from the reaction products, power needs to be generated by expansion of the reaction products and used to reduce the electrical output from the cell that is consumed by the compre

Стилі APA, Harvard, Vancouver, ISO та ін.

Scott, Colton M., and Jason R. Kolodziej. "A Novelty Detection Approach to Compressor Valve Fault Detection and Localization." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23314.

Повний текст джерела

Анотація:

Abstract Presented in this paper is the development of a vibration-based novelty detection algorithm for locating and identifying valve wear within industrial reciprocating compressors through the combined use of time-frequency analysis, image-based pattern recognition, and one-class support vector machines. A commonly reported cause of valve wear-related machine downtime is wear in the valve seat, causing a change in flow profile into and out of the compression chamber. Seeded faults are introduced into the valve manifolds of the ESH-1 industrial compressor and vibration data collected and se

Стилі APA, Harvard, Vancouver, ISO та ін.

Kurz, Rainer, Anand Srinivasan, Sara Goucher, and Tim David. "Test Campaign and Application Study for a High Pressure Compressor With Modular Rotor." In ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/gt2023-100497.

Повний текст джерела

Анотація:

Abstract Barrel style centrifugal compressors are widely used for high pressure gas compression applications in the oil and gas industry. Using a modular rotor in a high pressure centrifugal compressor for Oil and Gas Service is a method that is distinctly different from ubiquitous solid shaft machine designs. It is accepted in the governing standards, for example API 617, and allows for significant flexibility under changing operating requirements. Using a modular rotor allows to avoid splitting diaphragms, but it also requires different assembly, balancing and test methods. The machine descr

Стилі APA, Harvard, Vancouver, ISO та ін.

Kornhauser, Alan A. "Dynamics and Thermodynamics of a Free-Piston Expander-Compressor." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63517.

Повний текст джерела

Анотація:

In a free-piston expander-compressor (FPEC) the work of an expanding gas or vapor is used to compress another gas or vapor through a direct connection of one piston-cylinder assembly to another, without rotary motion. Each section of the FPEC operates like the piston-cylinder of a shaft-connected reciprocating machine. The expander section operates like that of a steam engine: high-pressure gas or vapor is freely admitted through part of the expansion process, but stopped at the “cutoff” part way through the expansion. The compressor section is like that of a shaft-driven reciprocating compres

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu, C., and R. S. Amano. "The Development of Centrifugal Compressor Impeller." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-50200.

Повний текст джерела

Анотація:

Impeller is one of the key components of industrial centrifugal compressors and turbochargers. Aerodynamic and structure designs of the impeller are critical to the success of the whole compressor stages. The requirements for efficiency and operating range of industrial centrifugal compressors and turbochargers have been increased dramatically compared with the situation in the past. The efficiency of newly developed low-pressure ratio centrifugal compressor has reached the possible level of the machine. However, the efficiency level of intermediate and high-pressure ratio machine still have g

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Compressor machine"

Chapman, Keshavarz-Valian, and Dolbee. L52226 Quantifications of the Effect of Dust Ingestion on Turbocharger Compressor Performance. Pipeline Research Council International, Inc. (PRCI), 2003. http://dx.doi.org/10.55274/r0011359.

Повний текст джерела

Анотація:

Turbomachinery that operates in a field environment, such as turbochargers utilized by the natural gas transmission industry, are subjected to environmental conditions that affect machine performance. For example, dust and oil in the atmosphere can deteriorate the machinery and as such lower operating efficiencies. The purpose of this study is to determine the effect of dust ingestion on compressor performance so operators can make informed decisions on sizing filter media and overhaul timing. Better decision making will ultimately increase the performance and lower maintenance costs.

Стилі APA, Harvard, Vancouver, ISO та ін.

Goffin, Bob. PR309-19202-R01 Current Control Technology for Compressor Stations. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011629.

Повний текст джерела

Анотація:

This is a evaluation of available sensor, control, and data storage technology in use by the compressor industry. It briefly examines current, available but underutilized, and future technologies related to sensor technology, sensor power, communications topology and technology, controllers, human machine interfaces, control algorithms, operator level data access, and asset managers. Based on those observations, future research suggestions are offered.

Стилі APA, Harvard, Vancouver, ISO та ін.

Choquette, Gary. PR-000-16209-WEB Data Management Best Practices Learned from CEPM. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011568.

Повний текст джерела

Анотація:

DATE: Wednesday, May 1, 2019 TIME: 2:00 - 3:30 p.m. ET PRESENTER: Gary Choquette, PRCI CLICK DOWNLOAD/BUY TO ACCESS THE REGISTRATION LINK FOR THIS WEBINAR Systems that manage large sets of data are becoming more common in the energy transportation industry. Having access to the data offers the opportunity to learn from previous experiences to help efficiently manage the future. But how does one manage to digest copious quantities of data to find nuggets within the ore? This webinar will outline some of the data management best practices learned from the research projects associated with CEPM.

Стилі APA, Harvard, Vancouver, ISO та ін.

Nguyen, Dinh, Petr Anisimov, and Nicole Neveu. Electron Bunch Compression, CSR, mBi, Laser Heater & Machine Layout. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1765844.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tranter, Robert S. Development of a High Repetition Rate, Miniature Rapid Compression Machine for High Temperature Kinetics. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1501830.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lynch, Patrick, Peng Zhao, and Mukul Tomar. Final Report: MISR: MINIATURE IGNITION SCREENING RAPID COMPRESSION MACHINE FOR KINETIC MEASUREMENTS OF NOVEL FUELS. Office of Scientific and Technical Information (OSTI), 2023. http://dx.doi.org/10.2172/2280653.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Justin Olsson, Justin Olsson. Real-time underwater fish identification and biomonitoring via machine learning-based compression of video to text. Experiment, 2025. https://doi.org/10.18258/77387.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cooke. L51783 100000 Hour Design Life of Turbo Compressor Packages. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010340.

Повний текст джерела

Анотація:

The gas pipeline industry continues to respond to the challenges of competitive markets and the need to manage the cost of service effectively. A major cost element being reviewed by the industry is the operating and maintenance expense for its fleet of older turbo compressor units. Many turbo-machinery manufacturers and operators typically quote 100,000 hours as a design limit for service life of turbo compressor components. The Pipeline Research Committee initiated this study to review the life limiting criteria for certain critical components and determine if the design target of 100,000 ho

Стилі APA, Harvard, Vancouver, ISO та ін.

Mudryj, Igor, and Igor Ivaneіko. The Use of Small Drilling Equipment in the Arrangement of Pile Foundations in Compressed Conditions. Intellectual Archive, 2022. http://dx.doi.org/10.32370/ia_2022_09_11.

Повний текст джерела

Анотація:

The procedure for finding technological parameters for the installation of pile foundations with small-sized drilling rigs, when developing design and technological documentation in compressed construction conditions, is considered. Methodological approaches to the choice of technologies for the construction of pile foundations are shown, depending on the dimensions of the small-sized drilling machines used, the required area for their placement, storage areas, and auxiliary equipment. in compressed conditions of construction. The existing normative documents do not set out separate requiremen

Стилі APA, Harvard, Vancouver, ISO та ін.

Tanai, Yertai, and Kamil Ciftci. A Comprehensive Study of Impacts of “Q” Bus Rapid Transit System on Blackstone Avenue. Mineta Transportation Institute, 2025. https://doi.org/10.31979/mti.2025.2450.

Повний текст джерела

Анотація:

This study examines the dual impact of the Fresno Area Express (FAX) Q Line, a 15.7-mile Bus Rapid Transit (BRT) system launched in 2018, on the Fresno housing market and passenger satisfaction. The Q Line, designed to modernize public transit,features eco-friendly compressed natural gas (CNG) vehicles, real-time passenger information, and improved service efficiency.Housing market analysis focused on residential properties sold between 2012 and 2024, utilizing Geographic Information System(GIS) mapping to segment properties into three regions: the Q Line corridor, an outer buffer zone, and th

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!