Готові списки джерел за темами / Compressor selection

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Compressor selection"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Compressor selection".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Compressor selection"

Tsutsumi, S., and J. Boone. "The Design, Selection, and Application of Oil-Injected Screw Compressors for Fuel Gas Service." Journal of Engineering for Gas Turbines and Power 117, no. 1 (1995): 81–87. http://dx.doi.org/10.1115/1.2812785.

Повний текст джерела

Анотація:

Fuel gas compressors installed in cogeneration systems must be highly reliable and efficient machines, like the other main components, such as gas turbines, gas engines, etc. In the range of gas flow rate and pressure conditions generally required for such systems, the oil-injected screw compressor is often the most suitable compressor type for these requirements. Advantages of oil injected screw compressors are: improved compression efficiency; low discharge gas temperature; high reliability; simple mechanical construction; which all result from injection of lubricant into the compressor. Inj

Стилі APA, Harvard, Vancouver, ISO та ін.

Lelgemann, K. D. "The Design, Selection, and Application of Oil-Free Screw Compressors for Fuel Gas Service." Journal of Engineering for Gas Turbines and Power 117, no. 1 (1995): 74–80. http://dx.doi.org/10.1115/1.2812784.

Повний текст джерела

Анотація:

Fuel gas compressors installed in cogeneration systems must be highly reliable and efficient machines. The screw compressor can usually be designed to meet most of the gas flow rates and pressure conditions generally required for such installations. To an ever-increasing degree, alternative sources are being found for the fuel gas supply, such as coke-oven gas, blast-furnace gas, flare gas, landfill gas, and synthesis gas from coal gasification or from pyrolysis. A feature of the oil-free screw compressor when such gases are being considered is the isolation of the gas compression space from t

Стилі APA, Harvard, Vancouver, ISO та ін.

Gao, Jian Qiang, Shao Dong Sun, Li Kun Wang, and Ning Wang. "The Analysis on the Scheme of the Flue Gas Compressor of a 300 MW Oxy-Fuel Pulverized Coal Fired Boiler." Applied Mechanics and Materials 602-605 (August 2014): 638–41. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.638.

Повний текст джерела

Анотація:

The compression of the flue gas is one of the most critical processes of CO2 recycling in oxy-fuel combustion technology. With a 300 MW Oxy-fuel pulverized coal fired boiler taken as an example of study, the selection of compressors of its flue gas compressing system is analyzed by the thermodynamic calculation. In this paper, two centrifugal compressors with the same specification are in parallel running as Scheme 1 of selection, while an axial compressor and a piston compressor are in series operation as Scheme 2 of selection. It shows that the Scheme 2 has the advantage of the energy consum

Стилі APA, Harvard, Vancouver, ISO та ін.

Ryabko, Boris. "Time-Universal Data Compression." Algorithms 12, no. 6 (2019): 116. http://dx.doi.org/10.3390/a12060116.

Повний текст джерела

Анотація:

Nowadays, a variety of data-compressors (or archivers) is available, each of which has its merits, and it is impossible to single out the best ones. Thus, one faces the problem of choosing the best method to compress a given file, and this problem is more important the larger is the file. It seems natural to try all the compressors and then choose the one that gives the shortest compressed file, then transfer (or store) the index number of the best compressor (it requires log m bits, if m is the number of compressors available) and the compressed file. The only problem is the time, which essen

Стилі APA, Harvard, Vancouver, ISO та ін.

Johan, Destiny Khairyan, Ali Mashar, and Slameto Slameto. "Design of Oil-Free Compressor in Compressed Air System PT Sanbe Farma Unit 1." Fluida 16, sp1 (2023): 46–52. http://dx.doi.org/10.35313/fluida.v16isp1.5519.

Повний текст джерела

Анотація:

This research is the development of a screw type compressor technology found in the utility system of PT. Sanbe Farma. This design aims to design a screw oil-free compressor focusing on solving problems that generally occur in a compressor, namely contamination between compressed air and oil. For this compressor, ISO Standard 8573-1: 2010 is used, and then the design results are compared with the simulation results that have been validated using the Aspen Hysys application. Several factors can affect the compressor's design, including the use of diameters in the pipe installation and the selec

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, S., C. Bai, and J. Shim. "Performance analysis and experiment of new 3D rotary compressor." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226, no. 1 (2011): 133–44. http://dx.doi.org/10.1177/0954406211413519.

Повний текст джерела

Анотація:

R410A is one of the HFC refrigerants, which are preferred globally to promote the most environmentally friendly option on the basis of an objective reference system taking into account the alternative selection of HCFC refrigerants for the air-conditioning system by the Kyoto protocol. This article presents a three-dimensional (3D) rotary compressor that is within the family of rotary compressors. First, the geometry of the compressor is explained and equations relating the volume of the compression and suction chambers to the rotational angle of the shaft are derived. These equations are used

Стилі APA, Harvard, Vancouver, ISO та ін.

Kosuri, Lakshmi Thirumala, M. Deepika Krishna, Adilakshmi i. Karapat, B. S. B. Ayyappa Swamy, and Dinesh Nayak S. "A Low Power High Speed Accuracy Controllable Approximate Multiplier Design." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 1625–30. http://dx.doi.org/10.22214/ijraset.2022.41617.

Повний текст джерела

Анотація:

Abstract: For energy effective and high performance design, the low power VLSI circuit is used. Multiplier is an essential part of low power VLSI design, since the effectiveness of the digital signal processor depends upon the multiplier. In multiplier circuit, utmost of the power is dissipated across in full adder circuits. Multiplication is one of the important process in microprocessor and there will be a lot of delay because of array multiplier, which can be compressed with the help of the column compressor approach. It uses a selection of half adders, full adders and compressors to sum th

Стилі APA, Harvard, Vancouver, ISO та ін.

Kang, Hyun-Su, Sung-Yeon Kim, and Youn-Jea Kim. "Wet Compression Study for an Aero-Thermodynamic Performance Analysis of a Centrifugal Compressor at Design and Off-Design Points." Processes 10, no. 5 (2022): 936. http://dx.doi.org/10.3390/pr10050936.

Повний текст джерела

Анотація:

In this study, to analyze the effect of wet compression technology on the aero-thermodynamic performance of a centrifugal compressor, a numerical analysis study was conducted on the design point and off-design point. Wet compression technology sprays water droplets at the inlet of the compressor. During the compression process, water droplets evaporate, reducing the heat of compression and reducing the compression work, which improves the efficiency of the compressor. In wet compression technology, detailed research is needed for the application to compressors because the droplet behavior affe

Стилі APA, Harvard, Vancouver, ISO та ін.

Cyklis, Piotr, and Przemysław Młynarczyk. "An innovative simulation method for the estimation of the nozzle pressure pulsation attenuation." Journal of Vibration and Control 23, no. 16 (2015): 2690–703. http://dx.doi.org/10.1177/1077546315619534.

Повний текст джерела

Анотація:

Pressure pulsations in volumetric compressor manifolds have a high impact on compression power requirement and the reliability of manifold operation. These pulsations induce vibrations, noise, and in some cases, mechanical failure of piping or compressor valves. For pressure pulsation attenuation, different types of mufflers are applied using a design based upon the Helmholtz resonator approach. This design is particularly effective for constant revolution speed compressors. For contemporary applications of variable revolution speed compressors, other pressure pulsation attenuation methods are

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Pan, Xiwei Ke, Weiliang Wang, Xueyu Tang, Junfu Lyu, and Qinghong Tang. "Study on the Selection of Single-Screw Steam Compressors in Industrial Steam Supply." Energies 16, no. 10 (2023): 4199. http://dx.doi.org/10.3390/en16104199.

Повний текст джерела

Анотація:

Both direct and indirect heating compression methods were proposed to satisfy the requirement of industrial steam compression and supply. The compression process in a single-screw compressor was analyzed with the determination of different inlet and outlet boundary conditions. Considering the misalignment of meshing pairs caused by the offset of the star wheel axis and screw origin, the differential expansion of the vertical meshing pair was further analyzed. The inner ring of the sealing end face, the wall of the inner ring of the bearing at the inlet and outlet ends, and the bottom surface o

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Compressor selection"

Holmberg, Henrik. "Towards Automatic and Systematic Compressor Model Selection Based on Measurement Data." Thesis, Linköpings universitet, Fordonssystem, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-178104.

Повний текст джерела

Анотація:

Centrifugal compressors are mechanical devices that move and compress gas and are used in a wide range of applications. To get as much efficiency out of the compressors as possible, high demandsare put on having good compressor models. One method of compressor modeling is the curve fitting method, where empirical and mathematical models are used to parameterize relationships between different compressor characteristics. The models come in a vast variety of formats, complexity and difficulty of applying them. With the variety of compressors and models to select from, it is important to select a

Стилі APA, Harvard, Vancouver, ISO та ін.

Якимів, Д. С. "Дослідження одноступеневої холодильної машини з різними типами компресорів". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86616.

Повний текст джерела

Анотація:

У роботі виконано розрахунок параметрів у вузлових точках циклу одноступеневої холодильної машини, в результаті чого визначено необхідну продуктивність компресора. Потім виконано порівняльний аналіз поршневого, гвинтового та спірального компресорів за загальноприйнятою методикою та за допомогою програмного забезпечення компанії Bitzer. За результатами розрахунку і аналізу виконано підбір компресора, який найбільше задовольняє вимогам. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації холодильного обладнання та виконано розрахунок природного та штучного

Стилі APA, Harvard, Vancouver, ISO та ін.

Tipton, Russell C. "Simulation of a storage freezer operating with a binary nonazeotropic refrigerant blend part I. equation of state cycle selection compressor model and air-cooled condenser model." Ohio : Ohio University, 1989. http://www.ohiolink.edu/etd/view.cgi?ohiou1182524272.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Лавриненко, О. С. "Вибір та проектування компресорної машини об’ємного принципу дії для системи холодопостачання". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/76506.

Повний текст джерела

Анотація:

Розділ 1 "Спеціальний розділ": розрахунок ротаційно-пластинчастого компресора, розрахунок поршневого компресора, розрахунок гвинтового компресора, розрахунок спірального компресора, порівняльний аналіз різних типів компресорів, визначення витрати газу через зазори спірального компресора; розділ 2 «Охорона праці та безпека у надзвичайних ситуаціях»: небезпечні і шкідливі фактори компресорного виробництва, розрахунок захисного заземлення електроприводу, розрахунок хімічної обстановки на об'єкті у зв’язку з аварією на прилеглій залізничній станції, що призвела до руйнування ємності з аміаком; роз

Стилі APA, Harvard, Vancouver, ISO та ін.

Олійник, Я. О. "Проєктування стаціонарної азотно-мембранної компресорної станції". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86611.

Повний текст джерела

Анотація:

У роботі виконано розрахунок стаціонарної азотної мембранної станції, а саме підбір та розрахунок гвинтових компресорів, сепаратора та фільтра. Потім виконано розрахунок потреби в стисненому азоті по трьом гілкам, які відрізняються чистотою кінцевого продукту. В результаті аналізу використання різної кількості компресорів для потреб стиснення азоту, виконано вибір найбільш оптимального варіанту. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації гвинтових компресорів. В работе выполнен расчет стационарной азотной мембранной станции, а именно подбор и

Стилі APA, Harvard, Vancouver, ISO та ін.

Venter, Johan. "Development of a dynamic centrifugal compressor selector for large compressed air networks in the mining industry / Johan Venter." Thesis, North-West University, 2012. http://hdl.handle.net/10394/9540.

Повний текст джерела

Анотація:

Various commercial software packages are available for simulating compressed air network operations. However, none of these software packages are able to dynamically prioritise compressor selection on large compressed air networks in the mining industry. In this dissertation, a dynamic compressor selector (DCS) will be developed that will actively and continuously monitor system demand. The software will ensure that the most suitable compressors, based on efficiency and position in the compressed air network, are always in operation. The study will be conducted at a platinum mine. Compressed a

Стилі APA, Harvard, Vancouver, ISO та ін.

Chau, Wing San. "Key frame selection for video transcoding /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202005%20CHAU.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ryen, Tom. "Rate-distortion optimal vector selection in frame based compression." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Information Technology, Mathematics and Electrical Engineering, 2005. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-575.

Повний текст джерела

Анотація:

In signal compression we distinguish between lossless and lossy compression. In lossless compression, the encoded signal is more bit efficient than the original signal and is exactly the same as the original one when decoded. In lossy compression, the encoded signal represents an approximation of the original signal, but it has less number of bits. In the latter situation, the major issue is to find the best possible rate-distortion (RD) tradeoff. The rate-distortion function (RDF) represents the theoretical lower bound of the distortion between the original and the reconstructed signal, su

Стилі APA, Harvard, Vancouver, ISO та ін.

Cai, Xun Ph D. Massachusetts Institute of Technology. "Algorithms for transform selection in multiple-transform video compression." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/74903.

Повний текст джерела

Анотація:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012. Cataloged from PDF version of thesis. Includes bibliographical references (p. 73). Selecting proper transforms for video compression has been based on the rate-distortion criterion. Transforms that appear reasonable are incorporated into a video coding system and their performance is evaluated. This approach is tedious when a large number of transforms are used. A quick approach to evaluate these transforms is based on the energy compaction property. With a proper transfor

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Jihong. "Sparse Modeling in Classification, Compression and Detection." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5051.

Повний текст джерела

Анотація:

The principal focus of this thesis is the exploration of sparse structures in a variety of statistical modelling problems. While more comprehensive models can be useful to solve a larger number of problems, its calculation may be ill-posed in most practical instances because of the sparsity of informative features in the data. If this sparse structure can be exploited, the models can often be solved very efficiently. The thesis is composed of four projects. Firstly, feature sparsity is incorporated to improve the performance of support vector machines when there are a lot of noise features pr

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Compressor selection"

Gresh, M. Theodore. Compressor performance: Selection,operation, and testing of axial and centrifugal compressors. Butterworth-Heinemann, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Brown, Royce N. Compressors, selection & sizing. Gulf Pub. Co., 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Society, British Compressed Air. Guide to the selection and installation of compressed air services. 4th ed. BCAS, 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Society, British Compressed Air, ed. Guide to the selection and installation of compressed air services. 3rd ed. The Society, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

V, Ciancanelli E., Johnson K. E, Nelson C. G, Cascadia Exploration Corporation, and Electric Power Research Institute, eds. Selection, evaluation, and development of porous-media reservoirs for compressed-air energy storage. EPRI, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Institution of Mechanical Engineers. Fluid Machinery Committee. and Energy Efficiency Best Practice Programme., eds. Design, selection, and operation of refrigerator and heat pump compressors: Achieving economic cost and energy efficiency, 26 November 1998, IMechE Headquarters, London, UK. Professional Engineering Pub. for the Institution of Mechanical Engineers, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Institution of Mechanical Engineers. Fluid Machinery Committee. and Energy Efficiency Best Practice Programme., eds. Design, selection, and operation of refrigerator and heat pump compressors: Achieving economic cost and energy efficiency : [proceedings of a seminar held on] 26 November 1998, [at] IMechE Headquarters, London, UK. Professional Engineering, for the Institution of Mechanical Engineers, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Midgley, David H. Centrifugal Compressor and Pump Selection. McGraw-Hill Education, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

(Editor), John Davidson, and Otto von Bertele (Editor), eds. Process Fan and Compressor Selection. Wiley, 1995.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gresh, M. Theodore. Compressor Performance: Selection, Operation, and Testing of Axial and Centrifugal Compressors. Butterworth-Heinemann, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Compressor selection"

Unnikrishnan, G., and V. Pratapkumar. "When Compressor Selection Went Wrong." In Front End Engineering Design of Oil and Gas Projects: Critical Factors for Project Success. CRC Press, 2023. http://dx.doi.org/10.1201/9781003317081-14.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Watanabe, Fumi, and Atsushi Akisawa. "Selection of Adsorbents for Double-Effect Adsorption Refrigeration Cycle Combined Compressor." In Transition Towards 100% Renewable Energy. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-69844-1_41.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dahl, Trygve. "Optimizing Pump and Compressor Selection for Energy Efficiency Using True-Weighted Efficiency (TWE)." In Springer Proceedings in Energy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69799-0_52.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Adeyeri, Joseph B. "Compression." In Selective Neck Dissection for Oral Cancer. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-12127-7_63-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Oneto, Luca. "Compression Bound." In Model Selection and Error Estimation in a Nutshell. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-24359-3_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Fook-Hou. "Dynamic Compaction/Compression." In Selective Neck Dissection for Oral Cancer. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-12127-7_99-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Brunet, James, Athanasios Demetri Pananos, and Aleksander Essex. "Review Your Choices: When Confirmation Pages Break Ballot Secrecy in Online Elections." In Electronic Voting. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15911-4_3.

Повний текст джерела

Анотація:

AbstractOnline voting systems typically display a confirmation screen allowing voters to confirm their selections before casting. This paper considers whether a network-based observer can extract information about voter selections from the length of the exchanged network data.We conducted a detailed analysis of the Simply Voting implementation, which had randomly varying lengths of exchanged data due to dynamic page content and gzip compression. We demonstrated that we could correctly guess a voter’s selection with accuracy values ranging up to 100% in some instances. Even on more complex ball

Стилі APA, Harvard, Vancouver, ISO та ін.

Ravindra Babu, T., M. Narasimha Murty, and S. V. Subrahmanya. "Data Compaction Through Simultaneous Selection of Prototypes and Features." In Compression Schemes for Mining Large Datasets. Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5607-9_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Üstebay, Deniz, Rui Castro, Mark Coates, and Michael Rabbat. "Distributed Approximation and Tracking Using Selective Gossip." In Compressed Sensing & Sparse Filtering. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38398-4_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Blachnik, Marcin, and Mirosław Kordos. "Information Selection and Data Compression RapidMiner Library." In Studies in Big Data. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30315-4_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Compressor selection"

Schnurr, Jonas, Momme Adami, and Mirko Skiborowski. "Refrigerant Selection and Cycle Design for Industrial Heat Pump Applications exemplified for Distillation Processes." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.119494.

Повний текст джерела

Анотація:

Mechanical compression heat pumps are indispensable to facilitate the transition from thermally driven processes to renewable energy by electrification, upgrading low-temperature waste heat to recycle it at a higher temperature level. However, the implementation of such heat pumps up to date encounters limitations, due to equipment limitations and a lack of tools for the design of process concepts for the application of high-temperature heat pumps. The optimal design of heat pumps relies heavily on the selection of an appropriate refrigerant, as the thermodynamic properties significantly affec

Стилі APA, Harvard, Vancouver, ISO та ін.

Malkawi, Ameen, Ahmed AlAdawy, Rajesh Kumar V. Gadamsetty, and Rafael Lastra Melo. "Compression Technology Selection for Downhole Application in Gas Wells." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90854.

Повний текст джерела

Анотація:

Abstract Downhole gas compression technology is an artificial lift method that aims to boost production, maximize recovery and delay onset of liquid loading in gas wells. There are different available compression technologies that can be considered for downhole applications, such as screw, scroll, centrifugal and axial compressors. Selection of the appropriate type mainly depends on expected well performance, ambient conditions, compressor operating envelope, technology characteristics, limitations and size constraints. The objective of this study is to perform a feasibility evaluation of comp

Стилі APA, Harvard, Vancouver, ISO та ін.

Mohamed, Ir Abdul Latif, Ir Ahmed Fadzil Mustafa Kamal, Kamaruzaman Baharuddin, and Siva Sankara Arudra. "Gas Compressor Driver Selection for Offshore Application." In Offshore Technology Conference Asia. Offshore Technology Conference, 2020. http://dx.doi.org/10.4043/30452-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ainge, Peter, and Eyad Al-Khateeb. "Selection and Evaluation of Ejectors for Flare Gas Recovery and Upstream/Midstream Gas Compression Applications." In International Petroleum Technology Conference. IPTC, 2022. http://dx.doi.org/10.2523/iptc-22401-ms.

Повний текст джерела

Анотація:

Abstract Historically, Ejectors have been regarded as novel but inefficient devices. For projects requiring a dedicated motive liquid stream (where one was not already freely available), the high liquid flow rate requirements (and therefore high pump power requirements) were prohibitive when compared to equivalent rotating compressors. In recent years, through its ongoing long-term Product Development Project, Ejector specialists, Transvac, have significantly increased the efficiency of its liquid-driven Ejectors. In some cases, over 50% reduction in pump power requirements has been achieved.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mæland, Dagfinn, and Lars E. Bakken. "Wet Gas Compression: Test Conditions and Similitude." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-64374.

Повний текст джерела

Анотація:

Wet gas compression of gas/condensate/water provides a business opportunity for oil and gas producers. There are several opportunities of particular note: 1) As well tail-end production commences, the installation of sub-sea compressors will provide enhanced oil recovery and, if the subsea compressor is capable of handling liquids, the subsea process complexity can be dramatically reduced, thus decreasing capital investments and possibly operational costs. 2) Topside and Onshore projects can also be dramatically simplified. This is the case for both new installations and modification projects

Стилі APA, Harvard, Vancouver, ISO та ін.

Emara, Ahmed, Mostafa Soliman, H. A. Monieb, and S. M. Abdelrazek. "Material Selection for a Turbocharger Centrifugal Compressor Wheel." In Automotive Technical Papers. SAE International, 2020. http://dx.doi.org/10.4271/2020-01-5066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Taher, Matt, and Cyrus Meher-Homji. "Matching of Gas Turbines and Centrifugal Compressors: Oil and Gas Industry Practice." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-68283.

Повний текст джерела

Анотація:

Gas turbine driven centrifugal compressors are widely used in the oil and gas industry. In evaluating the optimum selection of gas turbine drivers for centrifugal compressors, one of the main objectives should be to verify proper integration and matching of the centrifugal compressor to its gas turbine driver. Gas turbines are of standard designs, while centrifugal compressors are specifically designed to meet customer requirements. The purchaser should clearly specify process requirements and define possible operating scenarios for the entire life of the gas turbine driven centrifugal compres

Стилі APA, Harvard, Vancouver, ISO та ін.

Arsie, Ivan, Alfonso Di Domenico, Luca Pappalardo, Cesare Pianese, and Marco Sorrentino. "Steady-State Analysis and Energetic Comparison of Air Compressors for PEM Fuel Cell Systems." In ASME 2006 4th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2006. http://dx.doi.org/10.1115/fuelcell2006-97223.

Повний текст джерела

Анотація:

The aim of the work is to perform a comparative study of the compression system for a polymer electrolyte membrane (PEM) fuel cell. This study wishes also to address some key-features on the suitability of different compressors with respect to the main system design issues (e.g. energy balance, system performance and control). According to the technologies currently considered as being able to meet fuel cell system requirements, sliding vane, twin-screw and centrifugal compressors have been studied. The analysis has been performed making use of a modeling approach based on both thermodynamic d

Стилі APA, Harvard, Vancouver, ISO та ін.

Sharifi, Navid, and Masoud Boroomand. "Numerical Optimization of Thermo-Compressors Based on Non-Dimensional Geometrical Parameters." In ASME 2012 Gas Turbine India Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gtindia2012-9701.

Повний текст джерела

Анотація:

Thermo-compressors are essential parts in desalination units and using the high pressure motive steam to compress large amounts of low pressure steam without any moving parts or blades. One of the current challenging issues in thermo-compressor design is the correct size selection for different dimensions to achieve the maximum entraining capability at a given compression ratio. The conventional design methods are based on varying shape parameters such as lengths, angles and diameters of internal parts and select a particular geometry which yields the best performance under given boundary cond

Стилі APA, Harvard, Vancouver, ISO та ін.

Taher, Matt, and Cyrus B. Meher-Homji. "Design Considerations for High Pressure Boil-Off Gas (BOG) Centrifugal Compressors With Synchronous Motor Drives in LNG Liquefaction Plants." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90329.

Повний текст джерела

Анотація:

Abstract The increased size of Liquefied Natural Gas (LNG) plants worldwide has led to an increase in boil-off gas (BOG) flows. The BOG can be either liquefied again to LNG or compressed to higher pressure levels for use as fuel gas. Single shaft multistage centrifugal compressors are used to compress large volume of BOG at high pressures. This paper reviews design considerations for synchronous motor driven BOG centrifugal compressors operating at high discharge pressures. Several design features including compressor selection and sizing, auxiliary system, performance characteristics and test

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Compressor selection"

Pantermuehl, P. J., and A. J. Smalley. TR-97-6 Compressor Anchor Bolt Design. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0011724.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Crocker, Malcolm, P. Raju, and S. Yang. NPR199201 Standard Sound Power Level Specification and Measurement Procedure. Pipeline Research Council International, Inc. (PRCI), 1992. http://dx.doi.org/10.55274/r0011640.

Повний текст джерела

Анотація:

These guidelines describe a method for in-situ determination of the sound power level of the noise sources in indoor or outdoor environments for gas compressor station equipment using sound intensity measurements. The guidelines contain information on instrumentation, installation and operation of the source, procedures for the selection of a measurement surface, procedures for the sampling of sound intensity on the measurement surface, procedures for the calculation of sound power level, and techniques that can be used to qualify the measurement environment. Typical results obtained for diffe

Стилі APA, Harvard, Vancouver, ISO та ін.

Cooke. L51783 100000 Hour Design Life of Turbo Compressor Packages. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010340.

Повний текст джерела

Анотація:

The gas pipeline industry continues to respond to the challenges of competitive markets and the need to manage the cost of service effectively. A major cost element being reviewed by the industry is the operating and maintenance expense for its fleet of older turbo compressor units. Many turbo-machinery manufacturers and operators typically quote 100,000 hours as a design limit for service life of turbo compressor components. The Pipeline Research Committee initiated this study to review the life limiting criteria for certain critical components and determine if the design target of 100,000 ho

Стилі APA, Harvard, Vancouver, ISO та ін.

Fischer and Bothwell. PR-309-14211-R01 SCR Application to Typical Two-Stroke Cycle Pipeline Engines. Pipeline Research Council International, Inc. (PRCI), 2015. http://dx.doi.org/10.55274/r0010848.

Повний текст джерела

Анотація:

Future emissions regulations for the natural gas industry are imminent and will be, in some cases, very severe.� One of many possible technologies that may be applied to meet these regulations is an exhaust gas after treatment called Selective Catalytic Reduction or SCR. Application of SCR to 2 stroke cycle internal combustion engines offers a unique set of challenges unlike any other in existing SCR systems. This paper reviews these various challenges in detail, enumerates a functional specification for a �typical� compressor station, evaluates a selection of possible SCR system candidates� a

Стилі APA, Harvard, Vancouver, ISO та ін.

Jay. L51723 Guidelines for Sound Power Level Measurements Compressor Equipment. Pipeline Research Council International, Inc. (PRCI), 1994. http://dx.doi.org/10.55274/r0010419.

Повний текст джерела

Анотація:

Increasing legislation and public awareness of noise are intensifying the efforts of industries today to reduce the noise. The natural gas industry has proved that it is one of the industrial leaders in its awareness of noise problems and has maintained a vigorous research program in noise control for over 30 years. A noise survey can be done in several ways: point measurements, grid point methods, contour methods, scanning techniques, etc. The selection of the method depends on the accuracy required, available personnel, expertise etc. For the most accurate determination of sound power, the s

Стилі APA, Harvard, Vancouver, ISO та ін.

Wilcox. PR-015-09200-R01A Compressor and Pump Station Incidents and Technology Gaps. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0010956.

Повний текст джерела

Анотація:

In 2008, Pipeline Research Council International (PRCI) took the initiative to identify the main causes of reportable incidents in compressor and pump stations. Data was gathered from several sources including the United States� Department of Transportation Pipeline and Hazardous Materials Safety Administration, Canada�s National Energy Board, and PRCI member companies. More than 1600 incidents were reviewed over an 18 year period (1990 to 2008). The incidents were evaluated based on their frequency of occurrence and the consequences of the incidents (injury, ignition, environmental impact, et

Стилі APA, Harvard, Vancouver, ISO та ін.

Panek, McCarthy, and Drayton. PR-312-12208-R04 NO2-NOx Ratio Data Compilation and Assessment. Pipeline Research Council International, Inc. (PRCI), 2016. http://dx.doi.org/10.55274/r0011012.

Повний текст джерела

Анотація:

When modeling NO2 impacts from combustion sources, justification is required to receive approval of a representative in-stack NO2/NOx ratio, which is a key model input when using advanced modeling tiers that consider plume chemistry. A September 30, 2014 EPA memorandum requires approval by the Regional Office on a case-by-case basis regarding the selection and application of the in-stack NO2/NOx ratio. The EPA Tier 2 Ambient Ratio Method (ARM2) and Tier 3 Ozone Limiting Method (OLM) and Plume Volume Molar Ratio Method (PVMRM) NO2 methods require an in-stack NO2/NOx ratio (ISR) as an input to A

Стилі APA, Harvard, Vancouver, ISO та ін.

Olsen and Willson. L51916 Pressure Based Parametric Emission Monitoring Systems (PEMS). Pipeline Research Council International, Inc. (PRCI), 2002. http://dx.doi.org/10.55274/r0010181.

Повний текст джерела

Анотація:

The natural gas industry operates over 8000 stationary large bore (bore greater than 14 in) natural gas engines for natural gas compression on pipelines and power generation. As emissions regulations become increasingly more stringent, the need for low cost methods for compliance demonstration arises. A PEMS model is one such approach. Research in this area has increased significantly during the last decade. PEMS models for this application utilize parameters commonly measured on industrial engines in the field to predict engine-out emissions. Monitoring emissions in this manner represents a s

Стилі APA, Harvard, Vancouver, ISO та ін.

McCarthy, James. PR-312-18209-E05 Compressor and Facility Leak EFs for T and S - Clarifying Different Program Approaches. Pipeline Research Council International, Inc. (PRCI), 2024. http://dx.doi.org/10.55274/r0000050.

Повний текст джерела

Анотація:

Emission factors are often used to estimate methane leak emissions for natural gas transmission and storage facilities, such as compressor leak EFs and station leak EFs. However, different approaches are used in the literature for grouping compressor and other facility leak data, which can cause confusion when comparing estimates from different reports or data sources. It is also important to understand these differences when selecting EFs to use for purposes such as facility or system methane inventory development for a particular company or within a particular state. This white paper discuss

Стилі APA, Harvard, Vancouver, ISO та ін.

Gomez-Leon, Steve, and Anthony J. Smalley. TR-97-7 Main Bearing Temperature Monitoring. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0011736.

Повний текст джерела

Анотація:

Evaluates methods to monitor main bearing temperatures in reciprocating compressor units including industry practice, typical data, analysis of data characteristics and variability, identification of requirements for a monitoring strategy, alternative monitoring approaches, performance simulation for these alternatives, and the synthesis of a preferred approach, with factors to consider in selecting limits or alternatives to the preferred approach. It includes recommendations for the gathering of data from station logging systems which will help guide and refine monitoring decisions.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!