Увійти

Готові списки джерел за темами / Design of cutting tool / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Design of cutting tool.

Статті в журналах з теми "Design of cutting tool"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Design of cutting tool".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Tian, Xin Li, Hao Wang, Xiu Jian Tang, Zhao Li, and Ai Bing Yu. "Edge Design for Regrinding Cutting Tool." Applied Mechanics and Materials 101-102 (September 2011): 938–41. http://dx.doi.org/10.4028/www.scientific.net/amm.101-102.938.

Повний текст джерела

Анотація:

Regrinding of wasted cutting tools can recycle resources and decrease manufacturing costs. Influence of relative tool sharpness and tool cutting edge angle on tool edge radius were analyzed. Cutting force and cutting temperature were simulated with FEM on different edge radius. Edge preparation experiments were carried out though an abrasive nylon brushing method. The results show that RTS and cutting edge angle have influence on edge radius. Small edge radius might result in small cutting forces and lower average temperatures, could maintain the cutting state between tool and workpiece. The c

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Novoselov, Yu A. "Automation of cutting-tool design." Russian Engineering Research 28, no. 12 (2008): 1234–40. http://dx.doi.org/10.3103/s1068798x08120174.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

R., Panchal. "Design and Analysis of Single Point Cutting Tools." Research and Reviews: Journal of Mechanical Engineering 1, no. 1 (2025): 29–34. https://doi.org/10.5281/zenodo.15235162.

Повний текст джерела

Анотація:

<em>Single point cutting tools are essential in machining processes, particularly in turning operations where precision and efficiency are critical. This paper explores the design parameters of single point cutting tools, including tool geometry, material selection, and cutting-edge modifications. The study investigates the impact of rake angle, relief angle, nose radius, and tool material on cutting performance, tool wear, and surface finish. Finite element analysis (FEA) and experimental validation are employed to optimize tool design for enhanced durability and machining efficiency. The fin

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Wu, Wen Ge, Zhan Qiang Liu, and Yun Ping Cheng. "Design of the Intelligent Turning Tool System with Adjustable Tool Geometry." Key Engineering Materials 375-376 (March 2008): 681–85. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.681.

Повний текст джерела

Анотація:

The tool geometry such as rake angles and cutting edge inclination angles play significant roles in determining machining performance. The task of selecting cutting tool inserts and cutting conditions is traditionally carried out on the basis of the experience of process planners with the help of data from machining handbooks and tool catalogues. This situation urges the need for development of some intelligent tooling system to reduce these inefficiencies for optimum economic and technological machining performance. A model of turning tool mechanism having the function of controllability in c

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ostapenko, Maria, and Natalya Voronova. "Cutting tool standardization." MATEC Web of Conferences 346 (2021): 03052. http://dx.doi.org/10.1051/matecconf/202134603052.

Повний текст джерела

Анотація:

The article aims to determine the role of standardization in the engineering industry and for cutting tools in general. This paper explains the basic principles of standardization. The technical committee for standardization of cutting tools (TC 95 ‘Tools’) was presented. The main directions of work and functions of TC 95 ‘Tools’ are explained. Harmonization of standards in Russia is presented on the example of ISO 13399 international standard. The work reveals positive aspects of officially translated versions of standards for enterprises. The article also describes the role of standardized t

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Xu, Dong Mei, Jinn Jong Sheu, and Bo Wen Chang. "Tool Path Design Methods for High Efficiency Die Cavity Machining with CAD/CAM Technology." Advanced Materials Research 189-193 (February 2011): 3050–55. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3050.

Повний текст джерела

Анотація:

In this research, high efficiency machining tool path design of die cavities were developed using CAD/CAM and plunge roughing technology. The algorithms of cutting tool path design for ideal and non-ideal rouging area were proposed to improve the material removal rate (MRR). The proposed tool path design methods are based on the minimum numbers of rectangular or triangular patterns to cover the roughing areas. The cutting results of the traditional Z-plane and the plunge roughing were compared to show the improvement of the cutting efficiency with the proposed methods. Design of experiments (D

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Fan, Mengchao, Chunxu Bi, Caixu Yue, Xianli Liu, and Yingnan Zhu. "Research on Double-Arc Cutting Tool Design and Cutting Performance." Applied Sciences 13, no. 6 (2023): 3689. http://dx.doi.org/10.3390/app13063689.

Повний текст джерела

Анотація:

With the increasing complexity of the workpiece surfaces in aerospace and automotive molding and other areas, an increasing number of cutting tools with different shapes and performance have become necessary. A new kind of cutting tool is developed with a double-arc revolving surface at the tool’s end to improve the processing quality in numerical control milling, referred to as a double-arc cutting tool (DACT) in this paper. The parametric geometric model of the DACT is established. Three types of cutting-edge curves are proposed (a cutting edge with a constant helix angle, a cutting edge wit

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Svinin, V. M., V. A. Ushakov, A. G. Tikhonov, A. S. Pyatykh, R. V. Kononenko, and А. E. Rodygina. "Dynamometric cutting tool." iPolytech Journal 27, no. 2 (2023): 263–83. http://dx.doi.org/10.21285/1814-3520-2023-2-263-283.

Повний текст джерела

Анотація:

The aim was to develop, manufacture and test a technically simple dynamometer for monitoring the cutting process during boring and turning. An S20R-SSSCR09 right-hand cutter was selected as a research object. To register the cutting force and vibration movements of the cutter tip in tangential and radial directions, the cutter was equipped with four KF5P1-10-400-A-12 strain gauges mounted according to a half-bridge scheme. The bending stiffness of the cutter in two directions was measured by a DOU-3-01 compression dynamometer and a DDP-10A dial indicator. The cutter natural frequency was deter

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Häusler, Andreas, Kim Torben Werkle, Walther Maier, and Hans-Christian Möhring. "Design of Lightweight Cutting Tools." International Journal of Automation Technology 14, no. 2 (2020): 326–35. http://dx.doi.org/10.20965/ijat.2020.p0326.

Повний текст джерела

Анотація:

Taking into account the growing demand for sophisticated cutting tools in terms of their performance, new approaches, besides the development of the tool’s cutting edge, have to be investigated and validated by physical tests. In this study, methods of topology optimization and hybrid design are adopted for cutting tools. After a quick overview of its motivations, reduction of mass, the design of load paths, and beneficial functions within tool bodies, a structured method and its application on a long shell end mill for metal cutting is described as part of a holistic approach at the system an

Стилі APA, Harvard, Vancouver, ISO та ін.

10

YAKUB, BABA AHMAD, and USMAN MOHAMMED SANUSI. "Appropriate Design Method Adopted for Single Point Cutting Tool." International Journal of Innovative Science and Research Technology 7, no. 9 (2022): 1294–300. https://doi.org/10.5281/zenodo.7184125.

Повний текст джерела

Анотація:

The appropriate methodology adopted for the design of single point cutting tool is an important aspect of tool engineering. It deals with the design of tool shank, design of single point cutting tool, and various forces involved during machining of the workpiece. Selection of the appropriate material for the design of the single point cutting tool is paramount important and consideration must be put emplace.Various aspects of tooling, material cost, fabrication, manufacturing methods and the proper functioning of product should be considered. Strength and rigidity of tool is also taken into ac

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Sui, Xiu Lin, Di Wang, Xin Yang Liu, and Yan Teng. "Database Design of NC Cutting Tool Matching and Management System." Advanced Materials Research 981 (July 2014): 546–50. http://dx.doi.org/10.4028/www.scientific.net/amr.981.546.

Повний текст джерела

Анотація:

In order to improve efficiency of the cutting tool in the practical production process and mend the phenomenon of disjunction between previous NC cutting tool matching and cutting tool management, integrate matching with management of cutting tool and regard Access as the backstage database and apply VC++6.0 software to develop database management systems of cutting tool matching and management. The production process of cutting tool efficient matching and the management process of cutting tool information is studied, according to the application requirements of system, then the function targe

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Li, Liyao. "Design of Regenerative Flutter Stability Detection System in Machine Tool Cutting." Journal of Physics: Conference Series 2074, no. 1 (2021): 012071. http://dx.doi.org/10.1088/1742-6596/2074/1/012071.

Повний текст джерела

Анотація:

Abstract Cutting chatter is a strong relative vibration between cutting tool and work piece in machining process, which will reduce cutting quality and cutting efficiency, and shorten the service life of cutting tool and machine tool. As long as cutting is carried out in production, vibration will occur, and chatter is a strong self-excited vibration between machining work piece and cutting tool. Flutter problem will occur in almost all cutting processes, which will cause a series of problems such as the reduction of dimensional accuracy of machined work pieces, tool damage and so on. In the d

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Qiu, Li Jun, and Su Ying Xu. "Powder Particle Cutting Method and Tool Design." Advanced Materials Research 823 (October 2013): 300–303. http://dx.doi.org/10.4028/www.scientific.net/amr.823.300.

Повний текст джерела

Анотація:

The powder particles with a flat-screen multi-tooth cutter blade design. This tool structure is used to glue particles fell legitimate work . Processing tool blade tines arranged in a staggered structure . The tool is a gap in the working conditions . Install the tool in the tool axis rotation is strip knives.Friction surface of the tool can be used strip surface design class . Rotating shaft mounted knives role is to bring people powder particles processing zones . After extrusion and promote the formation of frustration legitimate work . Friction surface knives biggest advantage is the use o

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Wan, Zhiqiang, and Qingqing Zhang. "Design of a NC machine tool for machining that is easy to change cutting tools." MATEC Web of Conferences 380 (2023): 01009. http://dx.doi.org/10.1051/matecconf/202338001009.

Повний текст джерела

Анотація:

A CNC machine tool for machining designed to facilitate the replacement of cutting tools includes a workbench, a motor and a hydraulic cylinder. The inner bearing of the workbench is connected with a rotating rod, the outer key of the rotating rod is connected with a half gear, and the output end of the motor is connected with the lower end of the rotating rod. The CNC machine tool for machining, which is convenient for replacing cutting tools, realizes the linkage between the cutting tool body and the adjusting gear by using the tooth block, and drives the adjusting rod to move by using the r

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Laurence, Natalia Hartono, and Setiawan Clara Alverina. "Prototype Design Of Chicken Meat Cutting Tool." MATEC Web of Conferences 218 (2018): 04003. http://dx.doi.org/10.1051/matecconf/201821804003.

Повний текст джерела

Анотація:

The main thing the chicken skewers owners do is cut the meat into blocks. However, to produce a cubical meat shape is not an easy task and takes a long time. Therefore, it is necessary to design a tool to help the chicken skewers business owner to cut the chicken breast faster. The purpose of this research was to design an ergonomically chicken meat cutting tool to produce cubical chicken meat in large quantities so that the work can be completed in a shorter time. The planning and product development stage of this research was based on Ulrich and Eppinger steps from phases 0 through 4. After

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Siregar, Ikhsan, J. B. Saedon, Mohd Shahriman Adenan, Muhammad Firdaus Mohammed Azmi, and Anis Fatihah Binti Harun. "Design, Develop and Simulate Microdrilling Cutting Tool." IOP Conference Series: Materials Science and Engineering 505 (July 4, 2019): 012094. http://dx.doi.org/10.1088/1757-899x/505/1/012094.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Rao, S. B. "Metal Cutting Machine Tool Design—A Review." Journal of Manufacturing Science and Engineering 119, no. 4B (1997): 713–16. http://dx.doi.org/10.1115/1.2836814.

Повний текст джерела

Анотація:

This paper reviews the key developments in the area of metal cutting machine tool design over the last three decades, from a very practical perspective. While defining the drivers of machine tool design as higher productivity and higher accuracy, this paper examines the advances in design from the needs of these two drivers.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Wu, C. L., and K. S. Wang. "An Intelligent Tool Post in a Lathe." Materials Science Forum 505-507 (January 2006): 1009–14. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.1009.

Повний текст джерела

Анотація:

An Intelligent Tool Post (ITP) used in lathe is proposed in this study. ITP is designed from the basis of two different cutting force characteristics produced from abnormal cutting generated by tool crashing workpiece and from normal cutting. ITP is capable of sensing and distinguishing the normal cutting signals from the abnormal ones. During normal cutting, ITP is able to resist the cutting torque and continue the cutting. As abnormal cutting occurs, the tool would move away from the workpiece without any damage. The equations for design and operation have been established. With the threshol

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Zhang, Yun Dian, Ying Bin Shen, and Zhi Ping Lu. "Design of an Ultrasonic Pointed Cutter." Applied Mechanics and Materials 494-495 (February 2014): 569–72. http://dx.doi.org/10.4028/www.scientific.net/amm.494-495.569.

Повний текст джерела

Анотація:

Ultrasonic cutting technique is an advanced processing method of cutting honeycomb materials. An ultrasonic pointed cutter was designed. Combined with the principle of ultrasonic cutting, the mathematical model of the tool was established. Modal analysis of the tool was calculated with the finite element software to study the effects of tool geometry on the natural frequency. The results show that the natural frequency increases as the tool thickness increases, but it decreases as the tool length increases. And it obtained the modal shapes and natural frequencies of the tool which meet design

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Ji, Wei, Xian Li Liu, Kai Li, Meng Chao Fan, and Dian Ge Zuo. "CSPAID: Cutting Tool “Shape-Performance-Application” Integrating Design Approach." Materials Science Forum 800-801 (July 2014): 470–74. http://dx.doi.org/10.4028/www.scientific.net/msf.800-801.470.

Повний текст джерела

Анотація:

Today’s cutting tool, characterized by specialization trend, require flexibility, adaptive and integrating of the cutting tool design. Targeting those goals, this paper presents a new approach, cutting tool “shape-performance-application” integrating design (CTSPAID), which considers the tool shape, performance and applications together, and builds the relationships between them, and achieve the combines between cutting tools and their applications. Also, the system architecture with three layers and two steps is put forward and IDEF0 are selected as the modelling method, as well as some ruler

Стилі APA, Harvard, Vancouver, ISO та ін.

21

KASUGA, Yukio, Masahiro MURAKAMI, and Shigehiro KAWAMORI. "Tool and Tool Guide Design for Shear Cutting of Tubes." Journal of the Japan Society for Technology of Plasticity 54, no. 629 (2013): 547–51. http://dx.doi.org/10.9773/sosei.54.547.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Wang, Yi Wen, Ming Na Ding, Wen Juan Zheng, Zhen Chen, and Jing Shu Hu. "Design of Typical Aerospace Materials Database System." Materials Science Forum 800-801 (July 2014): 644–48. http://dx.doi.org/10.4028/www.scientific.net/msf.800-801.644.

Повний текст джерела

Анотація:

Due to the rapid development of aerospace industry, the amount of cutting data is increasing. Establishing cutting database for aerospace industry is necessary. Therefore, this article designs the typical aerospace material database system. According to project requirements analysis and the conceptual design, nine function blocks is set. They are data management, experiment management, optimization management, cutting tool design, cutting tool simulation, knowledge base, aerospace solutions, systems management, and help. And the article describes content and processes of every function block.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

M. K. Ospantaev. "DEVELOPMENT OF THE DESIGN OF A PEAKLESS ROTARY CUTTING TOOL." Science and Technology of Kazakhstan, no. 4.2021 (December 27, 2021): 40–48. http://dx.doi.org/10.48081/jitj8922.

Повний текст джерела

Анотація:

Processing of external surfaces with turning tools is the most common in the total mass of tools, and occupies a special place in the technological process of manufacturing machine parts. The issues of increasing productivity, accuracy and reliability of the processing process have always been and remain relevant and effective for metalworking. The aim of the study is to improve the quality of processing of external cylindrical surfaces with the development of a new processing method and the design of a peakless turning through-hole cutter. The idea of the work is to develop a new design of a

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Lee, S. J., and S. G. Kapoor. "Cutting Process Dynamics Simulation for Machine Tool Structure Design." Journal of Engineering for Industry 108, no. 2 (1986): 68–74. http://dx.doi.org/10.1115/1.3187053.

Повний текст джерела

Анотація:

A methodology to simulate the real cutting process dynamics using a finite element structural model and a mechanistic face milling force model is proposed. While the finite element structural model provides an analytic way to assess structural dynamic characteristics, the mechanistic face milling force model calculates the time histories of cutting forces taking many cutting process parameters into consideration and acts as forcing functions to the structural model. The methodology is verified through experimentation. The effects of structural parameters and cutting process parameters on the d

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Wibawa, I. Wayan Suma. "DESIGN AND BUILD OF 1 (ONE) AXIS PLASMA CUTTING MECHANISM." Logic : Jurnal Rancang Bangun dan Teknologi 22, no. 2 (2022): 155–61. http://dx.doi.org/10.31940/logic.v22i2.155-161.

Повний текст джерела

Анотація:

Plasma cutting is a cutting process that is widely used by the metal industry and individuals. Plasma cutting is widely used because it has many advantages, including: Cheap tools and widely sold in the market, low operating costs because they use electric power and compressed air from a compressor, unlike oxyacetylene cutting which requires oxygen, the available tools are more flexible and easy moved. The use of plasma cutting is relatively easy, by setting the machine and then directing the plasma torch to the cutting plane as needed by maintaining a stable movement and height. However, when

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Xiao, Cai Wei, Hui Ding, Wen De Li, and Kai Cheng. "Design and Analysis of a Novel Sensing Cutting Tool for Precision Turning." Key Engineering Materials 516 (June 2012): 373–77. http://dx.doi.org/10.4028/www.scientific.net/kem.516.373.

Повний текст джерела

Анотація:

In this paper, a novel sensing cutting tool for precision turning is presented, which has a self-sensing function to monitor the cutting force in real-time cutting conditions. The basic idea is the integration of the sensors using piezoelectric film onto the rake face of the tool to measure the main cutting force. Piezoelectric film generates electrical signals according to the piezoelectric effect when it is subjected to small movements, due to the deflection and vibration of the tool during machining operations. The output electrical signal of the piezoelectric film is amplified and capable

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Jiang, Fang, Xi Bin Wang, Zhi Bing Liu, and Huai Ming Wang. "Stress Analysis on the Cutting Edge Based on Design of Micro-Cutting Tool." Key Engineering Materials 589-590 (October 2013): 395–98. http://dx.doi.org/10.4028/www.scientific.net/kem.589-590.395.

Повний текст джерела

Анотація:

Stress analysis on wedge zone is an important step for micro-cutting tool design. The effect of stress borne by the cutting tool upon the radius of its blunt edge was analyzed, when the tool machines with minimum cutting thickness which is confined within 10-4-10-2mm. It shows that the minimal extreme value of the radius of blunt edge is existed in the process of micro-cutting tool design.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Devashish, Sharma, Bhardwaj Ayush, and Upadhyay Hemant. "DESIGN AND DEVELOPMENT OF MULTIOPERATIONAL MACHINE TOOL." International Journal For Applied Research in Science and Engineering 3, no. 2 (2021): 19. https://doi.org/10.5281/zenodo.5168639.

Повний текст джерела

Анотація:

In an industry a considerable portion of investment is being made for machinery installation. So in this project we have a proposed a machine which can perform operations like drilling, sawing, grinding and metal cutting operation simultaneously which implies that industrialist have not to pay for machine performing above tasks individually for operating operation simultaneously. This project presents the concept of Multi-Functions Operating Machine mainly carried out for production based industries. We will develop a prototype model of a machine which would be capable of performing different

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Sun, Miaojun, Hao Jiang, Jing Wang, et al. "Cutting mechanism study on cutting tool and leading tool of super large diameter shield." Journal of Physics: Conference Series 2819, no. 1 (2024): 012048. http://dx.doi.org/10.1088/1742-6596/2819/1/012048.

Повний текст джерела

Анотація:

Abstract The cutting tool and leading tool are the primary cutting combinations when the super large diameter shield cutter head is excavated in the soft soil stratum. The cutter size, cutting parameters, and layout relationship will affect the tunneling efficiency of the cutter head. The explicit dynamics are used to simulate the cutting tool, the leading tool, and their combination. The effects of four factors, such as stratum, tool width, cutting depth, and cutting speed, on the cutting force and cutting efficiency of the cutting tool and the leading tool are studied through orthogonal test

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Chibane, Hicham, Sébastien Dubois, and Roland De Guio. "Innovation beyond optimization: Application to cutting tool design." Computers & Industrial Engineering 154 (April 2021): 107139. http://dx.doi.org/10.1016/j.cie.2021.107139.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Kiss, Dániel, and Gergő Mihályi. "Conceptional cutting tool design for internal thread turning." Design of Machines and Structures 10, no. 2 (2020): 41–48. http://dx.doi.org/10.32972/dms.2020.012.

Повний текст джерела

Анотація:

This article describes the different machining methods of the ball nut thread. One of the disadvantages of machining high pitch ball nuts by grinding process is to produce a modified tool profile to avoid collisions between the tool holder and the workpiece. However, by using profiled lathe inserts, it is possible to produce the thread profile of the ball nut using turning technology. The applicability of the technology is verified by tooling and experimental machining based on conceptual designs, the results of which are described at the end of the article.

Стилі APA, Harvard, Vancouver, ISO та ін.

32

O’Hara, John, and Fengzhou Fang. "Advances in micro cutting tool design and fabrication." International Journal of Extreme Manufacturing 1, no. 3 (2019): 032003. http://dx.doi.org/10.1088/2631-7990/ab3e7f.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Buljan, S. T., and S. F. Wayne. "Wear and design of ceramic cutting tool materials." Wear 133, no. 2 (1989): 309–21. http://dx.doi.org/10.1016/0043-1648(89)90044-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Xu, Su Ying. "Powder Particles Grinder Mechanism Design and Exploration Tool." Advanced Materials Research 887-888 (February 2014): 1251–54. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.1251.

Повний текст джерела

Анотація:

The powder particles using the tool grinder is composed of two types . One is mounted on the rotating shaft of the machine tool . This tool is generally single cutting edge . The installation tool is a bolt shank fixed to the rotary shaft of the positioning groove . When you need to replace the tool mechanical enclosure open , loosen all bolts to remove the tool to replace the new tool . With no cutting edge tools can extend tool life. Reduce the number of replacement tools . The second tool is mounted on the housing of the machine tool . Single cutting edge of the tool mounting clearance is s

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Balla, Oleg. "RESEARCH OF TOOL MATERIAL CUTTING PROPERTIES AND TOOL DESIGN PERFORMANCE CAPACITY." Proceedings of Irkutsk State Technical University 113, no. 6 (2016): 10–25. http://dx.doi.org/10.21285/1814-3520-2016-6-10-25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Karabulut, Şener, and Abdulkadir Güllü. "Dynamic Chip Breaker Design for Nickel-Base, Inconel 718, Alloy with Coated Carbide Tools Using Negative Angle Tool Holder." Solid State Phenomena 147-149 (January 2009): 758–63. http://dx.doi.org/10.4028/www.scientific.net/ssp.147-149.758.

Повний текст джерела

Анотація:

This study has focused on the chip-breaker design and experimental cutting of Inconel 718with the designed chip breaker. The process of chip breakage for Inconel 718 with respect to cutting speed, depth of cut and feed rate then chips and machined surfaces were analyzed from the experimental results. For this purpose, the nickel-base super alloy, Inconel 718was machined with a two layers PVD coated (TiAlN-TiN) carbide insert at feed rates of 0.10, 0.15, 0.20, 0.30 mm/rev, 0.5, 1, 1.5, 2 mm with depth of cuts, and 30, 45, 60, 75m/min cutting speeds using developed dynamic chip breaker with Nega

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Erry, Yulian T. Adesta, Riza Muhammad, and Avicenna. "Content Comparative Investigation on Tool Wear During End Milling of AISI H13 Steel with Different Tool Path Strategies." Bulletin of Electrical Engineering and Informatics 6, no. 4 (2017): 327–33. https://doi.org/10.11591/eei.v6i4.852.

Повний текст джерела

Анотація:

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experimen

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Salem, Amr, Hussien Hegab, and Hossam A. Kishawy. "Experimental Investigation of the Derivative Cutting When Machining AISI 1045 with Micro-Textured Cutting Tools." Metals 13, no. 9 (2023): 1587. http://dx.doi.org/10.3390/met13091587.

Повний текст джерела

Анотація:

In the context of satisfying sustainability requirements nowadays, dry machining is one of the ideal strategies to eliminate the environmental and human health burdens of machining processes. In addition, micro-textured cutting tools are used to improve the performance of dry machining processes. Micro-textures reduce the chip-tool contact length and thus reduce friction and heat, which results in fewer cutting forces and temperature. However, the action of micro-cutting of the bottom side of the chip, which is known as derivative cutting, cuts down the gains of using textured tools, where der

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Bergmann, Benjamin, Berend Denkena, Sascha Beblein, and Tobias Picker. "FE-Simulation Based Design of Wear-Optimized Cutting Edge Roundings." Journal of Manufacturing and Materials Processing 5, no. 4 (2021): 126. http://dx.doi.org/10.3390/jmmp5040126.

Повний текст джерела

Анотація:

The performance of cutting tools can be significantly enhanced by matching the cutting edge rounding to the process and material properties. However, the conventional cutting edge rounding design is characterized by a significant number of experimental machining studies, which involve considerable cost, time, and resources. In this study, a novel approach to cutting edge rounding design using FEM-based chip formation simulations is presented. Based on a parameterized simulation model, tool temperatures, stresses and relative velocities can be calculated as a function of tool microgeometry. It

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Kushwaha, R. L. "FINITE ELEMENT MODELLING OF TILLAGE TOOL DESIGN." Transactions of the Canadian Society for Mechanical Engineering 17, no. 2 (1993): 257–69. http://dx.doi.org/10.1139/tcsme-1993-0016.

Повний текст джерела

Анотація:

A non-linear finite element model was developed for three dimensional soil cutting by tillage tools. A hyperbolic constitutive relation for soil was used in the model. Analysis was carried out to simulate soil cutting with rectangular flat and triangular tillage blades at different rake angles and with curved blades. Interface elements were used to model the adhesion and the friction between soil and blade surface. Soil forces obtained from the finite element model for the straight blades were verified with the results from laboratory tillage tests in the soil bin. The finite element model pre

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Liu, Ming, Wen Juan Zheng, Xian Li Liu, Bo Zhang, and Hui Ping Zhang. "A Scientific Method of Tool Life Evaluation for Large Cylinder Section Cutting Database." Key Engineering Materials 589-590 (October 2013): 433–37. http://dx.doi.org/10.4028/www.scientific.net/kem.589-590.433.

Повний текст джерела

Анотація:

Cutting database; Image processing; Large cylinder section; Tool life evaluationAbstract. This paper builds the optimization database system of cutting parameters for large cylinder section. The system is based on Browser/Server mode (B/S). The system can optimize cutting parameters, store knowledge, query information, maintain system, assess tool life and design tool. It completes the optimization of cutting parameters, according to the cutting parameters to design and evaluate the properties of cutting tools. It introduces tool life evaluation, data analysis and storage model. This paper als

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Chang, S.-L., and H.-C. Tseng. "Design of a novel cutter for manufacturing helical cutting tools." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 219, no. 4 (2005): 395–408. http://dx.doi.org/10.1243/095440605x16901.

Повний текст джерела

Анотація:

Owing to the complex geometry of helical cutting tools, several manufacturing processes are required to produce the profile of the cutter and the cutting angles. If the traditional method of manufacture were used, the cost would be frustratingly expensive. In this paper, a novel straight-sided hob cutter design consisting of two curved cutting edges and three straight cutting edges with different pressure angles is proposed. By applying designed rake profile equations of a hob cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing, a

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Wang, Xin Gang, Bao Yan Wang, Chang You Li, and Chun Mei Lv. "Dynamic Reliability Sensitivity Design of Cutting Tool with Arbitrary Distribution Parameters." Advanced Materials Research 816-817 (September 2013): 201–5. http://dx.doi.org/10.4028/www.scientific.net/amr.816-817.201.

Повний текст джерела

Анотація:

The variation rules of strength, load, and reliability of cutting tool are studied with a change in time, and a model is established for dynamic reliability of cutting tool under the random load acting. By combining the theory of reliability design with the method of sensitivity analysis, the computational method of dynamic reliability sensitivity design with arbitrary distribution parameter is proposed based on the methods Edgeworth and perturbation, and the problem of dynamic reliability sensitivity design of cutting tool distributed arbitrary distribution is solved as well as the variation

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Huang, Wei Tai, Der Ho Wu, Shih Pin Lin, and Jian Ting Chen. "Robust Design of Using MWCNTs in Minimum Quantity Lubrication." Applied Mechanics and Materials 670-671 (October 2014): 11–21. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.11.

Повний текст джерела

Анотація:

This objective of this article is to present a new technique of nanofluids/MQL in high speed milling by using MWCNTs. In the past, studies have shown the MQL process can improve tool life and surface accuracy in high speed cutting. The purpose of using carbon nanotubes is to increase the thermal conductivity of cutting fluid and to reduce the temperature during the cutting and decrease the thermal wear of tool. The proposed study is to investigate the characterization of the MWCNTs/ nanofluids combined with MQL during the high speed milling of AISI 1050 and AISI P21 experimentally. The Taguchi

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Seke, Yosef Kasilda Raki, and Handy Febri Satoto. "Perancangan dan Pengembangan Alat Pemotong Tahu yang Ergonomis di UKM Pabrik Tahu Pak Singgi." Jurnal Surya Teknika 11, no. 1 (2024): 371–78. http://dx.doi.org/10.37859/jst.v11i1.7378.

Повний текст джерела

Анотація:

The production process at the Pak Singgi Tofu Making UKM, especially for cutting tofu, is carried out with a relatively bent body posture for a long period of time. The process of cutting tofu uses a ruler and knife as cutting tools. The process of cutting tofu takes an average of 10 cutting cycles a day. This makes cutting the tofu take longer and can cause discomfort during the process. To overcome this problem, it is necessary to design and develop ergonomic tofu cutting tools. This research aims to design and create an ergonomic tofu cutting tool to reduce the time needed to cut tofu and p

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Zhang, Kai, Bao Zhong Ji, S. W. Liu, and Zhen Hua Qing. "Research of Bionic Design on Tools with Chewing Mouthparts of Insects." Advanced Materials Research 426 (January 2012): 270–74. http://dx.doi.org/10.4028/www.scientific.net/amr.426.270.

Повний текст джерела

Анотація:

Bionic design is a new method in engineering design. The mouthparts especially for the chewing ones of the insects are discussed in this article. To improve the tool life and cutting properties are always the critical for the cutting tool design aim. The foreground of cutting tool design is discussed using the mouthpart of insect as bionic design object. The basic structure of the chewing mouthpart, type of mandibles, geometry, hardness, and element contained, moving mechanism and so on will be described. The research can also make direction at new tool material and tool geometry parameter des

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Koike, Yusuke, Atsushi Matsubara, Shinji Nishiwaki, Kazuhiro Izui, and Iwao Yamaji. "Cutting Path Design to Minimize Workpiece Displacement at Cutting Point: Milling of Thin-Walled Parts." International Journal of Automation Technology 6, no. 5 (2012): 638–47. http://dx.doi.org/10.20965/ijat.2012.p0638.

Повний текст джерела

Анотація:

Vibrations of a tool or workpiece during cutting operations shorten tool life and causes unwanted surface roughness. In this report, we propose an algorithm for determining the sequence of material removal, tool orientation, and feed directions, an algorithm minimizes workpiece displacements by considering workpiece stiffness and cutting force. In this research, the cutting path consists of the material removal sequence, tool orientation and feed directions. The material removal sequence changes the workpiece compliancematrix at the cutting points, and the feed directions and tool orientation

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Zhang, Kai, Bao Zhong Ji, Shu Wen Liu, and Zhen Hua Qing. "Primary Research of Bionic Design on Tools with Mouthpart of Larvae Long Horned Beetles." Advanced Materials Research 142 (October 2010): 139–42. http://dx.doi.org/10.4028/www.scientific.net/amr.142.139.

Повний текст джерела

Анотація:

Bionic design is a new method in engineering design. The mouthpart of the larva long horned beetle and its tunnel in wood are discussed in this article. To improve the cutting properties and tool life are always the main aim of cutting tool design. The foreground of cutting tool design using the larva long horned beetle is discussed on the bases of the mouthpart maxillae of Aphrodisium sauteri (Matsushita) and the tunnel in Quercus myrsinaefolia. The research can also make direction at new tool material and tool geometry parameter design.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Rahim, Erween Abdul, Z. H. Samsudin, Muhammad Arif Abdul Rahim, and Zazuli Mohid. "Performance Investigation of Modified Turning Tool Holder for MQL Application." Applied Mechanics and Materials 465-466 (December 2013): 1114–18. http://dx.doi.org/10.4028/www.scientific.net/amm.465-466.1114.

Повний текст джерела

Анотація:

Some machining process requires coolant to reduce the cutting temperature and helps to flush away the chips from the cutting zone. However, conventional flood coolant possesses some issues towards workers and the environment, regarding health and waste management. The implementation of Minimal Quantity Lubrication (MQL) as an alternative technique seems to be promising although the effectiveness of this technique were influenced by several factor. In turning process for instance, the distance of nozzle to the cutting zone contributes to the variation of machining performance. This study is to

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Kumar Singh, Akhilesh, Giri Vijay Temmanaboina, Prasanth Gummalla, and Pramod Kumar. "An Approach for Future-Oriented Framework Design: A Tool for Design Research." E3S Web of Conferences 184 (2020): 01049. http://dx.doi.org/10.1051/e3sconf/202018401049.

Повний текст джерела

Анотація:

Metals and Metals-alloys play a significant role in the everyday life of researchers and also in industrial applications to develop a new framework product. New development of tool and techniques help researchers to do their work smoothly. Multi-purpose machines mainly help researchers to do framework design and research as per need and it will save both cost and time. In this paper, the main aim is to develop a machine-stand that performs machine operations in a single column (either side of the column). The operations are cutting, grinding, and drilling. The purpose of the machine is to supp

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!