Увійти

Готові списки джерел за темами / Diagnostické metody / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Diagnostické metody.

Дисертації з теми "Diagnostické metody"

Автор: Grafiati

Опубліковано: 4 червня 2021

Оновлено: 18 лютого 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 дисертацій для дослідження на тему "Diagnostické metody".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Hindra, Matěj. "Diagnostické metody sledování plynů rozpuštěných v transformátorovém oleji." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230178.

Повний текст джерела

Анотація:

This thesis is devoted to analysis of the diagnostic methods used in practice. It is divided into two parts: theoretical and practical. The theoretical part concerns with the general description of the transformers. Further it provils informatik about systems for sampling oil from transformers with insulating oil – paper system. Another important part is the description of gas chromatography and TRANSPORT X. Description of the most appropriate evaluation methods for assessment of the state of the transformer is included as well.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Jandová, Kristýna. "Diagnostické metody plošného rozložení defektů solárních článků." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233487.

Повний текст джерела

Анотація:

This doctoral thesis deals with analysis of existing area defect detection methods in solar cells and with concept of its innovation and of the development of faster detection method. Results of measurement is analyzing in practical and theoretical part. The most important is LBIC (Light Beam Induced Current) method innovated of different wavelength light source usage and Electroluminescence method. On the bases of this knowledge is created Fast LBIC method and then is created catalog of defects in monocrystalline silicon solar cells.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Dolenský, Jan. "Diagnostické metody fotovoltaických článků využívající lokální emise světla." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233615.

Повний текст джерела

Анотація:

This thesis is focused on the area of analysis and diagnostic of monocrystalline solar cells, using local light radiation. Main goals of this thesis are focused on explanation of generation and behavior microplasma in solar cell, in dependence of temperature and reversed bias voltage. As a next focus of this thesis is strong regions of microplasma sources, analyzed by scanning electron microscope and a detailed analysis of edge and surface structure is made. The influence of the environment (air pressure, level of vacuum and nitrogen gas) on the microplasma generation and behavior is observed

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Bartoň, Jiří. "Diagnostické metody solárních článků za velmi nízkých teplot." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219058.

Повний текст джерела

Анотація:

This work deals with the modern diagnostic methods of defects detection of solar cells. Defects are detected by electroluminescence and photoluminescence methods. The main focus of this work is an innovation workplace for measuring solar cell defects at very low temperatures using photoluminescence. Liquid nitrogen is used to cooling solar cells. By using low temperatures can be detection methods to obtain more objektive results of diagnostic defects.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Sarvaš, Ondřej. "Diagnostické metody použitelné pro monitorování sušícího procesu cihlářských výrobků." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392324.

Повний текст джерела

Анотація:

This work deals with the study of diagnostic methods suitable for monitoring of the drying process of brick raw materials. Based on the extensive literature search, several parameters are selected, which are appropriate to monitoring during drying. In addition, a methodology for measuring these selected parameters is proposed. In the experimental part, the use of all described methods is gradually verified on the brick raw material with and without shortening additive (also known as grog). Was carried out: measurement of the surface temperature in the climatic chamber, determination of humidit

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Moravská, Veronika. "Stavební průzkum a diagnostika konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240425.

Повний текст джерела

Анотація:

This thesis deal with survey and diagnostics of industrial building in Chropyne. The theoretical presents to the general issue of building technical surveys, diagnostics reinforced concrete structures and describes methods for diagnosis of reinforced concrete structures. Practical part deals with building survey and diagnostics of the object including static assessment.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Šmatelka, Filip. "Hodnocení stavebně statického stavu existující konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265733.

Повний текст джерела

Анотація:

The main goal of master's thesis is to find out the technical and structural condition of building "Children and Youth Centre". This building is situated on the Komenského street in Velké Meziříčí. The main reason for diagnostic is to find out posibilities for building edits. The second reason is to get objective informations about technical condition of structural units.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Pokorný, Jakub. "Stavební průzkum a diagnostika železobetonové konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226090.

Повний текст джерела

Анотація:

The thesis Building Investigation and Diagnosis of Reinforced Concrete Structure is focused on analyzing two reinforced concrete bridge structures. It discusses different evaluation surveys and its influence on later evaluation of the bridges. In this thesis there is included static evaluation finding supports at one of reinforced concrete bridges. Practical part is complemented by the necessary theoretical part, which deals with exploring bridges, ways of their implementation, and a summary of the most commonly used diagnostic methods for bridges.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Mucha, Jan. "Diagnostika vlastností elektroizolačních zalévacích hmot." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220956.

Повний текст джерела

Анотація:

Submitted paper deals with the current condition of electrical insulating substances used in electrical engineering, including the requirements on their electric and mechanical qualities. Another part of this paper constitutes a set of samples of epoxy resins and through and application of appropriate diagnostical methods the characterization of their attributes in the wide temperature range.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Suchánková, Zuzana. "Stavební průzkum a hodnocení stavu konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240320.

Повний текст джерела

Анотація:

The diploma thesis is focused on study of diagnostic methods used for reinforced concrete structure with a practical example of a survey on the subject of the original memorial Bata in Zlin, today's House of Art. The theoretical part of the thesis describes the general methodology of the survey with the distribution methods for testing materials and structures, and displays the evaluation according to ČSN ISO 1382 Also deals with the required properties and used by diagnostic methods for concrete and steel. In the practical part of the surveyed, which is supposed to show the methodology of the

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Bulušek, Petr. "Diagnostika asynchronního motoru s ohledem na jeho údržbu a spolehlivost." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242024.

Повний текст джерела

Анотація:

The thesis Diagnostic of induction motor with regard to its maintenance and reliability aims to be a theoretical preparation and application of online diagnostics. It is trying to map correlations between electromechanical system failures driven by induction motor and output information of the diagnostic method. It mainly focuses on spectrum analysis of stator current which carries information on the induction motor status in the form of characteristic signatures in the spectrum (Motor Current Signature Analysis). The theoretical part deals with the concept of diagnostics and mainly with the o

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Lepík, Pavel. "Inovace systému pro detekci defektů solárních článků pomocí elektroluminiscence." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318492.

Повний текст джерела

Анотація:

This master thesis analyses the existing methods both practically and theoretically used to detect defected surface area in solar cells. Various methods were used but by using an upgraded CMOS camera without IR filter to implement the electroluminescence method, this has proven to have a very crucial impact on the results. Given the overall results and the acquired information, a procedure with a simple parameter can be setup to carry out the measurements. In addition to this a catalog was formed showing the defects occurring in mono and polycrystalline solar cells.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Balas, Ondřej. "Průzkum a hodnocení stavu stavební konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227512.

Повний текст джерела

Анотація:

This thesis is focused on the description and evaluation of the status of existing reinforced concrete and of the prefabricated overhanging structures. The first part describes the solution overhanging structures, followed by a description of selected diagnostic methods for determining the properties of concrete in the structure and to determine the degree and extent concrete reinforcement. The main objective is to determine the status of overhanging structures on the case static analysis and critical points of the support structure for the purpose of the planned revitalization of the object.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kirschbaum, Adam. "Hodnocení konstrukcí průmyslových objektů podle ČSN ISO 13822." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240048.

Повний текст джерела

Анотація:

This diploma thesis deals with the evaluation of the constructions of the industrial buildings according to the ČSN ISO 13822 Standard. In the first, theoretical part, the procedures of research and evaluation of existing reinforced concrete constructions based on the ČSN ISO 13822 and ČSN 73 0038 Standards are described. Further, the theoretical part is focused on the diagnostic methods used during the evaluation of these constructions. The practical part focuses on the evaluation of the three industrial reinforced concrete buildings. It includes information about the building, the descriptio

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Gvritishvili, Roman. "Měřicí pracoviště fotovoltaických článků s řízením teploty." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219641.

Повний текст джерела

Анотація:

Master`s thesis in the first part deals with the theoretical description of the basics of photovoltaics, principles of solar cell, failures occurring in solar cells. There were also described diagnostic methods for measuring the solar cells and methods of temperature measurements and control . The second part of the thesis deals with the practical measurements of solar cells by electroluminescence at different temperatures. This chapter also describes measuring workplace of solar cells with temperature control.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Toulová, Jana. "Vlastnosti kapalin na bázi organických esterů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219802.

Повний текст джерела

Анотація:

This master's thesis deals with the electrical insulation fluids used in electronics industry. The analysis of the current state of research and innovations in modern, biodegradable fluids in terms of their use as diagnostics. It is described by the physical nature of polarization and conductivity mechanisms, which are applied in liquids. It was compiled automated workstation for monitoring components of the complex permittivity over a wide temperature range. In the experimental part we analyzed the behavior of liquids selected alternative based on natural esters when exposed to an alternating

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Broďák, Marek. "Stavební průzkum a hodnocení stavu konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391891.

Повний текст джерела

Анотація:

This diploma thesis is focused on building survey and evaluating the state of existing constructions. In theoretical part are described the process of evaluating the state of existing constructions and selected diagnostic methods. The practical part is dealing with performed structural and technical survey of industrial object including evaluation of the strength of concrete and verification of the reinforcement. The last part is focused on a static assessment of selected supporting element of the structure.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Cvak, Jan. "Využití mikroskopu k diagnostice struktury materiálu a poruch u el. zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221280.

Повний текст джерела

Анотація:

The goal of this thesis is to describe the possibility of using a microscope for documentation defects and innovation of electrical machines. I used an electron microscope to document carbon brushes and nanomaterials for possible upgrade of the sliding contact. Use microscopes gives us detailed information about the structure of materials, at the largest stress of the electrical machine. Based on the collected data can be further analyzed and innovation of the carbon brush.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Zouharová, Kateřina. "Průzkum a hodnocení stavu dřevěné konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240220.

Повний текст джерела

Анотація:

The thesis is focused on the assessment of two wooden roof structures of the building, which is located in Brno on the street Rumiště 8. Parts of the work are also theoretical knowledge of roof structures, building technical survey and diagnostic methods. Rating roof truss was based on a survey of sensory and instrumental methods. In the first step were measured dimensions of roof truss members and were determined roof structures. In the next section was researched damage of elements and his causes. Rehabilitation solution was established for each type of damage to the components resist any at

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Novák, Jakub. "Diagnostika vybrané mostní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392122.

Повний текст джерела

Анотація:

The Diploma thesis deals with the Diagnostics of Reinforced Concrete Bridge in the village of Luhačovice. This thesis also describes the individual Diagnostic methods and instruments used in purpose to make Diagnosis of bridge constructions. The main aim of the Diagnostics is to determine the current state of the Bridge which consists in verification of the actual road structure, determination of the physical and mechanical parameters of the Concrete (strength, depth of carbonation) and in some parts of the bridge structure to determine the type, number and position of the bending or shear rei

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Soukup, Patrik. "Diagnostika točivých elektrických strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377107.

Повний текст джерела

Анотація:

The thesis Diagnostics of rotating electric machines deals with the theory of diagnostics of rotating machines, focusing especially on the diagnosis of asynchronous motors of high power. Due to the importance of maintaining the trouble-free condition of these machines with regard to serviceability, the importance of their diagnosis is growing. Due to inappropriate working conditions or for many other reasons, different types of malfunctions may occur in the machine. The list and the way of occurrence of possible failures are included and explained in this thesis. With the growing age of the ma

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Křivánková, Soňa. "Průzkum a hodnocení stavu dřevěné konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226973.

Повний текст джерела

Анотація:

This work is focused on compilation of general diagnostic methods used for diagnostic of wooden structures specifically listed wooden roof truss of church st. Bartholomew in Ivan. The main impulse of diagnosis was extensive damage and attack of truss and effort on rehabilitation and construction of the entire building of the church with an emphasis on preserving historical values. Diagnosis of truss was based on the research used sense and instrumental methods. In the first step, identify all dimensions of the individual elements of the structure was determined, the type truss system was inten

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Majtánová, Romana Viktória. "Hodnocení stavebně technického stavu objektu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240166.

Повний текст джерела

Анотація:

This work deals with construction material research office building with eighteen floors to the street Šumavská 35 in Brno with ground plan dimensions of about 25 x 25 m. The structure consists of a reinforced concrete substructure and floors of steel frame. The scope of the survey will determine the quality of concrete in vertical supporting columns at level 1. PP structures using cores and subsequent laboratory testing. Another task will be to verify the status of moorings steel perimeter columns to the building of reinforced concrete pillars at the boundary of 1st basement and 1st floor.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Sloupenský, David. "Stavební průzkum a hodnocení stavu konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265706.

Повний текст джерела

Анотація:

The diploma thesis in theoretical section is focused on a brief overview of the methods used in the diagnostic of reinforced concrete structures. The practical part of this thesis deals with the diagnostics of the manufacturing reinforced concrete buildings in the complex Fatra Napajedla. This part will provide concrete strength of existing structures and will verify the reinforcement of individual elements of the structure by means of modern devices – radar and electromagnetic rebar locator. In the final section of this thesis will be performed static reports of selected parts of the structur

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Bazaras, Vilius. "Lėtaeigių riedėjimo guolių diagnostiniai tyrimai." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20130218_131748-24042.

Повний текст джерела

Анотація:

Baigiamajame darbe pateikta literatūros šaltinių apžvalga susijusi su riedėjimo guolių defektų diagnostika. Darbe sukurta lėtaeigių riedėjimo guolių (iki 380 aps/min) esančių „INVERFORM“ džiovyklinių mašinų grupėse tyrimų metodika bei atlikti eksperimentiniai tyrimai. Pagrindinis šių tyrimų tikslas – sukurti patikimą tyrimų metodą, skirtą eksploatuojamų lėtaeigių sferinių riedėjimo guolių defektams diagnozuoti ir techninei būklei įvertinti. Metodas buvo sukurtas išsamių guolių korpusų virpesių matavimų ir virpesių duomenų formatų analizės pagrindu, mašinai dirbant natūralios eksploatacijos sąl

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Klusáček, Stanislav. "Metody bezdemontážní diagnostiky." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-233581.

Повний текст джерела

Анотація:

The main objective of the presented thesis is to contribute to the development of diagnostic methods for piezoelectric sensor testing. The thesis describes the methods for piezoelectric sensors microcracks identification and diagnostics. The core of the thesis presents the development of a knock sensor prototype, design of suitable methods for the knock sensors diagnosis and evaluation of developed methods with focus on detection of microcracks in the sensor piezoceramic. The last part of the thesis deals with the influence of cracks and splits on the measured data from the piezoelectric trans

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Štěpánek, Jakub. "Stavební průzkum a hodnocení stavu konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371937.

Повний текст джерела

Анотація:

This diploma thesis is focused on building survey and evaluating the state of existing constructions. Process of evaluating the state of existing constructions and selected diagnostic methods are described in the theoretical part. The practical part is dealing with performed structural and technical survey of two industrial structures including evaluation of the strength of concrete and verification of the reinforcement. The final part includes assessment of both of the evaluated structures.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Kučera, Filip. "Softwarové ovládací prostředí pro měřicí metodu LBIC." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218413.

Повний текст джерела

Анотація:

This thesis is focused on one of the diagnostic methods of fotovoltaic cells the LBIC (Light Beam Induced Current) method and the experimental measurement set-up for this method, which is operated by the Department of Electrical and Electronic Technology in Brno. The principle of photovoltaic cells function, the possibly used material and the problems usually encountred during production are described in this work,. There is also a review of methods that can be used to detect defects in photovoltaic cells. The main part is devoted to the proposal of a new experimental set-up for the measuring

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Nguyen, Martin. "Stavební průzkum a hodnocení stavu konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265486.

Повний текст джерела

Анотація:

This diploma thesis deal with the building survey and evaluating the state of existing constructions. In theoretical part are described the types of civil engineering surveys and diagnostic methods for conducting a survey of reinforced concrete structures. The practical part deal with describes the structural and technical survey of the production hall in the industrial area Fatra Napajedla, evaluating the strength of concrete on the existing structure through donations cores and verification of compliance with the reinforcement according to project documentation. The last part is focused on a

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Horák, Luděk. "Analýza elektrických vlastností epoxidových pryskyřic s různými plnivy v teplotní a kmitočtové závislosti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376991.

Повний текст джерела

Анотація:

Presented master's thesis is focused on studying electroinsulating epoxy resin-based sealings. It describes the chemical composition, production, properties and measuring methods of basic electric quantities of these materials. The aim of the thesis is to compare several sets of samples of composite epoxy resins with different kinds of micro-ground siliceous sand as a filling. The temperature and frequency dependence of relative permittivity, dissipation factor and inner resistivity are measured for given samples.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Škarabelová, Lenka. "Degradace epoxidových pryskyřic s různými plnivy slunečním zářením." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377078.

Повний текст джерела

Анотація:

This master’s thesis is focused on the study of chemical and physical properties of dielectric materials with main focus on epoxy resins. It includes possible processes that can influence the properties of epoxy resins, both processes that improve polymer properties and processes that cause material degradation. Next part of the thesis is a description of diagnostic methods suitable for measurement of basic electrical quantities of material and design of a suitable method for measuring properties of epoxy resins with different additives, influencing the samples by solar radiation. At the end,

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Benešl, Lukáš. "Vliv fyzických parametrů a stáří silnoproudého vedení na výkonnost a spolehlivost PLC/BPL." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413002.

Повний текст джерела

Анотація:

BPL technology is quite widespread nowadays and the public is also somewhat aware of it. This technology can be used as a means of communication without the need to install additional media and thus use the existing infrastructure. In an effort to use the full potential of the technology, BPL communication began to be used to monitor the current state of cables in distribution networks online. Where the technology is already fully implemented, the distributor can use the data to evaluate the current situation. In this way, BPL technology can be used as a diagnostic tool to test the quality of

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Ådemark, Belisa. "Två metoder för att påvisa lungemboli : En litteraturstudie." Thesis, Örebro universitet, Institutionen för hälsovetenskap och medicin, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-28777.

Повний текст джерела

Анотація:

Sammanfattning I Sverige drabbas ca 10000 personer årligen av lungemboli (LE). En vanlig bakomliggande orsak till LE är djup ventrombos. Tromboserna brukar vanligen sitta i benets eller bäckenets djupa vener. För att påvisa LE krävs att patienten genomgår olika radiologiska metoder såsom t.ex. datortomografi (DT) eller lungscintigrafi. Syftet med denna studie är att beskriva radiologiska metodval vid utredning av LE, för- och nackdelar med de olika metoderna och i vilka fall respektive metod föredras. I databasen Pubmed söktes vetenskapliga artiklar som analyserar vilken av de radiologiska me

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Holbová, Monika. "Diagnostika železobetonové konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265583.

Повний текст джерела

Анотація:

This diploma thesis deals with the building survey and diagnosis of the station building of a railway station in Vítkovice. It describes process of survey and evaluation of existing reinforced concrete structures and used diagnostic methods. The survey of the object is described in the practical part of the thesis, which involves location of testing spots, taking the samples for testing from the structure, laboratory testing and evaluation of the results – determination of compressive strength of concrete with classification of concrete and elastic modulus. The last part includes static calcul

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Balčiūnaitė, Eglė. "Imunochromatografinio tyrimo metodo patikimumo įvertinimas atliekant Žmogaus imunodeficito viruso aspektų analizę." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2014~D_20140611_143108-08555.

Повний текст джерела

Анотація:

Šio baigiamojo darbo tikslas – įvertinti imunochromatografinio tyrimo metodo patikimumą, atliekant Žmogaus imunodeficito viruso aspektų analizę. Siekiant įvertinti imunochromatografinio tyrimo metodo patikimumą, ŽIV tyrimai buvo atliekami atrankiniu FIRST RESPONSE HIV CARD TEST 1-2.0 testu, pagrįstu nagrinėjamu metodu. Tyrimas atliktas Infekcinių ligų ir tuberkuliozės ligoninės, VšĮ Vilniaus universiteto ligoninės Santariškių klinikų filialo laboratorijoje. ŽIV tyrimai atlikti visiems 18 - 60 metų amžiaus pacientams, hospitalizuotiems į Infekcinių ligų ir tuberkuliozės ligoninės Žvėryno stacio

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Kocich, Tomáš. "Komplexní diagnostika konstrukce bytového domu před rekonstrukcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225417.

Повний текст джерела

Анотація:

This thesis deals with the diagnosis of a residential building from the late nineteen twenties for the needs of reconstruction. The methods generally used in the diagnosis of structures are briefly described in the theoretical part. More deeply this section describes the methods that were used during this particular research. The practical part deals with the diagnosis of the object itself. The first section describes the layout of the villa, its design solution, its faults and defects detected during the inspection. The next section deals with evaluating the current state of construction mate

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Suchanek, Daniel. "Úprava zkušebního zařízení ložisek pro aplikaci metody akustické emise." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228767.

Повний текст джерела

Анотація:

Master’s thesis is focused on modification of experimental arrangement for radial ball bearing contact endurance testing so that the diagnostic method of acoustic emission could be applied. There is an assumption that AE method is able to identify damage to bearings in earlier stages than the vibration diagnostics. Design modifications also allow the addition of modern vibrodiagnostic equipment to a system.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Degutis, Aurimas. "Naujų riedėjimo guolių defektų diagnostiniai tyrimai." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2014~D_20140611_151233-28760.

Повний текст джерела

Анотація:

Šio tyrimo tikslas yra sukurti, realizuoti ir išbandyti metodą leidžiantį atlikti naujo riedėjimo guolio elementų neardoma diagnostiką ir įvertinti surinkimo kokybę. Norint įvertinti guolio kokybę jo neišardant, pasitelkti virpesių pagreičio signalo stebėsenos ir analizės metodai. Atlikti sekantys uždaviniai siekiant įgyvendinti tyrimo tikslą: • Apžvelgti pramonėje naudojami guolių kokybės įvertinimo metodai. • Sukurtas ir realizuotas metodas naujo guolio kokybei nustatyti. • Praktiškai patikrinta metodo teikiama nauda. • Išnagrinėta suteptų ir nesuteptų guolių įtaką kokybės nustatymui. Atliek

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Keršulytė, Gintarė. "Širdies signalų analizės metodų paieška ir kūrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_142805-77618.

Повний текст джерела

Анотація:

Didelė dalis širdies susirgimų diagnostinių kriterijų gaunama registruojant ir analizuojant kardiosignalus, kurie atspindi tiek elektrinės širdies veiklos sutrikimus (EKG), tiek ir hemodinaminės bei mechaninės veiklos pokyčius, t.y. impedanskardiograma (IKG) ir seismokardiograma (SKG). Dar daugiau, efektyvus širdies susirgimų diagnostikos problemų sprendimas yra naujų kardiosignalų analizės technologijų kūrimas. Jau kelis dešimtmečius Furjė transformacija taikoma EKG dažnumų analizei, tuo tarpu kai IKG ir SKG dažnio charakteristikų vertinimui šis metodas nebuvo naudojamas. Darbo tikslas buvo p

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Červený, Radek. "Průzkum a hodnocení dřevěného krovu historické budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225715.

Повний текст джерела

Анотація:

My dissertation is based on the appraisal of wooden roof construction in baroque church Nanebevzetí Panny Marie in Vranově nad Dyjí. The main reason of this appraisal was preserving the church´s interior which was newly reconstructed with high historical value. The dissertation includes also the rehabilitation solution. The appraisal was based on the research witch used sense and instrumental methods. In the first part were found out all size of each construction´s parts and was established the type of rafters´ systém. Then the research solved some impaired wooden parts and their reasons. For

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Harašta, Tomáš. "Pracoviště pro testování solárních článků metodou LBIC." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217237.

Повний текст джерела

Анотація:

Subject this diploma thesis is introduction to solar problems, with folow-up focus on solar elements and reflection about their defects. The next part is dedicated diagnostic method LBIC (Light Beam Induced Current) that help to detect defects of solar elements. The work is concerned with aplication this method in general view, from construction of workplace, throuhg hardware to software. The last part is focused on results processing and analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Hübková, Ivana. "Uplatnění diagnostických metod na zařízeních paroplynového bloku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219905.

Повний текст джерела

Анотація:

This master´s thesis deals with problem of reliability of technical device in general a so there is explained bathtub curve, defects and malfunctions of devices and then there is a brief outline of reliability system. This thesis further briefly describes technical diagnostic and then there is performed the vibrodiagnostic measurements of selected pumps and ventilators in in heating plant Červený mlýn in Brno. Evaluation of their condition is done according to relevant standards. Further there was done a diagnostic of the steam traps through the ultrasound diagnostic. The last part of my thesi

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Avrat, Jan. "Metody údržby a diagnostiky lopatkových motorů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228602.

Повний текст джерела

Анотація:

This master`s thesis deals with methods of turbojet engines maintenance and diagnostics. First specify and review methods. Then choose acceptable and perspective methods of non-destructive testing. Based on this choosing will be designed modern service center.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Matačiūnas, Mindaugas. "Vienalaikės širdies ir plaučių kompiuterinės tomografijos angiografijos metodo taikymas ir vertinimas nustatant plaučių arterijos trombinę emboliją." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20120131_092802-98909.

Повний текст джерела

Анотація:

Plaučių arterijos trombinė embolija (PATE) – sunki ūminė ir neretai atkrintanti širdies ir kraujagyslių liga. Tik miokardo infarktas ir galvos smegenų insultas yra dažnesni negu ūminė PATE. Ūminės PATE diagnostika nėra lengva. Klinikiniai simptomai dažnai esti neraiškūs ar nespecifiniai. Šiuolaikinėje klinikinėje praktikoje pirmo pasirinkimo tyrimas įtariant ūminę PATE yra plaučių arterijos kompiuterinės tomografijos (KT) angiografija. Sergančiųjų, kuriems dėl plaučių embolijos dar nėra išsivysčiusi sisteminė arterinė hipotenzija, mirštamumo rizika priklauso nuo embolijos apimties ir dešiniojo

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Daňková, Kateřina. "Metodika hodnocení stavu dřeva pomocí měření mechanického odporu při zatlačování trnu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225642.

Повний текст джерела

Анотація:

The main aim of the thesis is to gain an overview of diagnostic methods used in surveys of wooden structures, comparing the results of experimental evaluation of state timber using diagnostic methods that are based on measurements of the mechanical resistance of the wood. Detailed constructional - technical survey of the truss of the historic building in Šardice is also the part of this thesis.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Kafka, Martin. "Fotoluminiscenční diagnostická metoda s transmisním osvětlením." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218153.

Повний текст джерела

Анотація:

The aim of this diploma thesis is an innovation of photoluminescence measure research workplace for measurement of cells structure defects by method of transmissive illumination while employing the current methods of measurement of defect in the solar cells structure. The first part deals with explanation of historical development of solar energy, of how we can reach production of electric power with contribution of solar radiation and defines usability of solar cells in practice. The thesis further analyses a practical application of measurement via laboratory diagnostic methods used by Depar

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Hüblová, Sabina. "Diagnostika mostu poškozeného požárem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392271.

Повний текст джерела

Анотація:

This thesis is about assessment of a bridge construction influenced by fire accident. The bridge is situated at the highway D46 beyond the town Držovice. Within this construction research, there will be mentioned diagnostic methods – A non- destructive method (Ultrasonic pulse method and hardness tests) and destructive methods (borehole and tear off tests). For find out in which way was the concrete of the bridge damaged and hurt while facing a high temperature of fire, there were taken samples, which were analyzed by physical and chemical test. We can analyze composition and microstructure of

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Öberg, Månsson Ingrid. "Electroanalytical devices with fluidic control using textile materials and methods." Licentiate thesis, KTH, Fiberteknologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279327.

Повний текст джерела

Анотація:

This thesis, written by Ingrid Öberg Månsson at KTH Royal Institute of Technology and entitled “Electroanalytical devices with fluidic control using textile materials and methods”, presents experimental studies on the development of textile based electronic devices and biosensors. One of the reasons why this is of interest is the growing demand for integrated smart products for wearable health monitoring or energy harvesting. To enable such products, new interdisciplinary fields arise combining traditional textile technology and electronics. Textile based devices have garnered much interest in

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Kopec, Jan. "Diagnostika při hodnocení stavebně statického stavu existující konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409956.

Повний текст джерела

Анотація:

This work deals in the theoretical part in its theoretical part with a summary and detailed description of selected diagnostic methods that were applied to selected structural parts of an existing bridge structure within the practical part. The thesis also deals with the basic terminology and terminology in the field of bridge construction, subsequently, in its practical part deals in terms of diagnostics, the implementation of structural and static survey and subsequent evaluation of the current structural, technical and static state on selected structural units of existing reinforced concret

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Bagge, Joakim, Erik Hedman, Sabina Smedsrud, Cornelia Svärdström, Elisabeth Söderberg, and Fernando Valdés. "Utveckling av metodik för påvisning och typning av Listeria i livsmedelskedjan." Thesis, Uppsala universitet, Institutionen för biologisk grundutbildning, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-324030.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!