Увійти

Готові списки джерел за темами / Diamond grinding tool

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "Diamond grinding tool"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Diamond grinding tool".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Diamond grinding tool"

1

Brinksmeier, Ekkard, Yildirim Mutlugünes, Grigory Antsupov, and Kai Rickens. "New Tool Concepts for Ultra-Precision Grinding." Key Engineering Materials 516 (June 2012): 287–92. http://dx.doi.org/10.4028/www.scientific.net/kem.516.287.

Повний текст джерела

Анотація:

This paper presents advanced tools for ultra precision grinding which offer a high wear resistance and can be used to generate high-quality parts with an ultraprecise surface finish. The first approach features defined dressed, coarse-grained, single layered, metal bonded diamond grinding wheels. These grinding wheels are called Engineered Grinding Wheels and have been dressed by an adapted conditioning process which leads to uniform abrasive grain protrusion heights and flattened grains. This paper shows the results from grinding optical glasses with such Engineered Grinding Wheels regarding

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Luo, Shenq Yih, Ching Win Shih, and M. H. Chen. "A Study of the Grinding Alumina for the Multi-Point Diamond Tools." Advanced Materials Research 76-78 (June 2009): 603–8. http://dx.doi.org/10.4028/www.scientific.net/amr.76-78.603.

Повний текст джерела

Анотація:

The purpose of this paper is to investigate the performance of grinding alumina for the specific designed tools containing a controlled diamond protrusion and arrangement. The grinding forces, workpiece roughness and diamond wear at changing the depth of cut and feed under a fixed spindle speed were studied in the experiments. The experiment results showed that the grinding forces with the increase of feed slowly increased. However, the grinding forces with the increase of depth of cut showed a relatively larger rise. When the depth of cut reached to 0.09 mm that is about one fourth of diamond

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Lavrinenko, V., V. Poltoratskyi, О. Pasichnyi, V. Solod, and D. Muzichka. "MODIFICATION OF HEAT-RESISTANT OXIDES AND CHLORIDES OF GRAIN SURFACES OF SYNTHETIC DIAMOND GRINDING POWDERS FOR APPLICATION IN GRINDING TOOLS." Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences) 2, no. 39 (2021): 51–58. http://dx.doi.org/10.31319/2519-2884.39.2021.6.

Повний текст джерела

Анотація:

Further development of modern technologies of diamond processing is connected with application in the diamond tool of powders with new unique properties, special morphology of grains, with the increased chemical and thermal stability. To increase the heat resistance of diamonds, they are covered with a metal (metallization) or glass-ceramic layer, or introduced into the reaction mixture used in the synthesis of diamonds, alloying additives of certain elements. Recently, other methods of coating to increase the heat resistance of diamonds have been developed, such as: vacuum ion-plasma sputteri

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zhang, Feng Lin, Yu Mei Zhou, Chang Wen Guo, Jun Bo Mao, and Hui Ping Huang. "Performance of Brazed Diamond Tool for Machining Dental Ceramic." Advanced Materials Research 1027 (October 2014): 84–87. http://dx.doi.org/10.4028/www.scientific.net/amr.1027.84.

Повний текст джерела

Анотація:

Diamond tools are fabricated by brazing and used to machine dental ceramics in this paper. The morphology, grinding ratio, wear and grinding force of the brazed tools are investigated in comparison with that of the electroplated ones. The results show that the brazed alloy forms a hill-like structure around the diamond grits, and the protrusion of the brazed diamond grits is higher than that of the electroplated one. The grinding ratio of the brazed diamond tool is higher than the electroplated one. Many fall-off diamond pits of the electroplated tool and only few micro-crack diamond grits of

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Shrestha, Rabin, Zhong Bo Zhan, Ning He, and Liang Li. "Optimization of the Grinding Parameters for CVD Diamond Micro-Tools." Materials Science Forum 800-801 (July 2014): 633–38. http://dx.doi.org/10.4028/www.scientific.net/msf.800-801.633.

Повний текст джерела

Анотація:

This study is focused on the optimization of the grinding process parameters for the grinding of the CVD diamond micro-milling tool. Two types of CVD diamond i.e. CDM and CDE are used for the study. Feed rate and the grinding velocity are used as the grinding parameters. The optimizations of the parameters are done by studying the two results i.e. grinding force and cutting edge radius. Highest grinding velocity and medium feed rate is found to have the best result for the grinding of the CVD diamond. Keywords: CVD diamond, Grinding, Micro-tool

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Zhou, Yu Mei, Feng Lin Zhang, Meng Jia He, and Hui Ping Huang. "Effect of Arraying Patterns of Diamond Grits on the Wear of the Mono-Layer Brazed Diamond Tool." Solid State Phenomena 175 (June 2011): 47–51. http://dx.doi.org/10.4028/www.scientific.net/ssp.175.47.

Повний текст джерела

Анотація:

. In this paper three uniformly arraying patterns (GD, CC and UR) and one non-uniformly arraying pattern (NUR) of diamond grits are used to fabricate the mono-layer brazed diamond grinding tools. The wear characteristics of those grinding tools are compared. It is found that NUR tool wears faster than other uniformly arrayed tools in the wet grinding. The protrusion of diamond grits on NUR tool is much lower than that on GD, CC and UR tool after 20 h of wet grinding. By tracking one diamond grit’ wear processes on CC and NUR tools in the dry grinding respectively, it is found that the diamond

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Zhang, Bei, Hong Jun Xu, Yu Can Fu, and Hong Hua Su. "Development of High Performance Monolayer Brazed Diamond Grinding Tool for Ceramics." Advanced Materials Research 135 (October 2010): 388–92. http://dx.doi.org/10.4028/www.scientific.net/amr.135.388.

Повний текст джерела

Анотація:

This study has developed a new kind of high performance monolayer brazed diamond tool for ceramic grinding. The grit size of the diamond brazed in the grinding wheel surface is 300m, which has never been reported in diamond tools for ceramic precision machining. The experiment has achieved wonderful surface finish of Zirconia workpiece. This does owe to the designed and precision conditioned topography of the new developed grinding wheel. The topography of the grinding wheel before and after dressing has been measured by means of laser triangulation method. Then the Zirconia workpiece has bee

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Luo, Shenq Yih, J. K. Ho, Ming Yi Tsai, Yi Xian Liu, and William Chen. "A Study of the Diamond Tools for Grinding Polycrystalline Diamond." Advanced Materials Research 126-128 (August 2010): 585–90. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.585.

Повний текст джерела

Анотація:

The purpose of this paper was to investigate the grinding performance of two types of cobalt and vitrified bond diamond tools produced by the hot press for the vertical flat grinding polycrystalline diamond. The worn diamond type and the diamond protrusion observed by the toolmaker or SEM after grinding under two different feed rates of 1 and 5 mm/min and the depth of cut of 2 µm with total depth of 10µm were studied. In addition, the grinding efficiency and the workpiece surface roughness produced were analyzed as well. The experiment results showed that when the feed rate of 1 mm/min during

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Cheng, Wei, Gui Cheng Wang, and Ping Liang. "Forecast Research of Diamond Grinding Parameters Based on Multi-Variable Grey Model." Advanced Materials Research 472-475 (February 2012): 3035–38. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.3035.

Повний текст джерела

Анотація:

Based on the multi-variable grey model and taking the statistical Design of Experiments result of concrete diamond grinding parameters as the data sample, a gray forecasting model of concrete diamond grinding parameters was built. In substituting the real experiment data, a verification experiment for the machining volume and grain wear forecast of concrete diamond grinding tool was conducted using grinding parameters as input value and machining volume and grain wear as output value. The example result indicated that the model can precise forecast them machining volume and grain wear of diamo

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Deunezhev, Z. N., M. R. Kardanova, A. R. Bechelova, Kh B. Kushkhov, M. M. Tkhabisimova, and M. M. Yakhutlov. "SIMULATION OF THERMAL STRESSES IN DIAMOND GRINDING WHEELS." Quality. Innovation. Education, no. 4 (2022): 38–43. http://dx.doi.org/10.31145/1999-513x-2022-4-38-43.

Повний текст джерела

Анотація:

Numerical modeling of thermal stresses in the «diamond-matrix» system of diamond grinding wheels on a polymer matrix has been carried out. The effect of various coatings on diamonds and their thicknesses on stresses has been studied. The ways of increasing the working capacity of the tool by reducing the stresses in the system are proposed.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Diamond grinding tool"

1

Смоквина, В. В. "Вивчення можливостей застосування природної дефектності синтетичних алмазів для підвищення їх експлуатаційних характеристик". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11446.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Guo, Lei. "Ultraviolet Bonding of Diamond Abrasive Tools for Lap-Grinding Process." University of Toledo / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1354572460.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Guo, Lei. "Study of the Influence of Nanosized Filler on the UV-Curable Resin Bonded Diamond Abrasive Tools." University of Toledo / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1461690140.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Wang, Jenn-Yeu, and 王振宇. "A Study of the Bronze Bonded Diamond Tool for Grinding BK7 Glass." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/87651016799134241420.

Повний текст джерела

Анотація:

碩士<br>華梵大學<br>機電工程研究所<br>94<br>The purpose of this paper is to investigate the bronze-bonded diamond tools made of four different amounts of resin and graphite by using the hot press. These tools operated in the dry grinding BK7 glasses were used to evaluate the performance of grinding forces, the diamond wear, the material removal mechanisms and the surface roughness under four different conditions of the high spindle rotation speed and feed. The experimental results showed that the diamond tools containing the more amounts of graphite and the less amounts of resin displayed a close-packed an

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Jhong, Hong-Wei, and 鍾弘威. "Studies for the Fabrication of Multi-Point Diamond Tool and the Grinding Alumina." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/41334921529793235279.

Повний текст джерела

Анотація:

碩士<br>華梵大學<br>機電工程學系博碩專班<br>99<br>Multi-point diamond grinding tools were fabricated by hot press. The point, line and plane of diamond abrasive cutting edges and their directions and arrangements on tools were designed to grind alumina ceramic. The effects of the designed tools on the grinding force and surface roughness are studied. And the bonding conditions of metal binder for diamond grit and stainless steel rod’s interface were also investigated. Experiment results showed that when the binder of 50wt% Bronze/50wt% Fe for diamond grinding rod was used, the resulting bonding condition betw

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Chang, Yu-Fu, and 張祐福. "Fabrication of Ni – Co Alloy Co-deposition of Micro Diamond Tool and Its Applications to Synchronous Electrical Discharge Grinding." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/qsy5rt.

Повний текст джерела

Анотація:

碩士<br>國立高雄應用科技大學<br>模具工程系碩士班<br>102<br>This research attempts to achieve a synchronized hybrid process of micro-EDM grinding (micro-EDMG, or μEDMG) on a single machine, it is aimed at saving the secondary precision grinding process after general micro-EDM process in micro-machining fields. First, the micro-tool of tungsten carbide was dressed to 0.3 mm diameter by a WEDG (wire electrical discharge grinding) system, and co-deposited in the nickel electro-plating bath with 6~12 μm of diamond abrasives. A low speed spindle is used for electro-plating, and then, another high speed spindle up to 20

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Chen, Jo-Han, and 陳若翰. "A study of grinding glass using precision electroplated diamond tools." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/46180461570549575510.

Повний текст джерела

Анотація:

碩士<br>華梵大學<br>機電工程學系<br>103<br>The purpose of the paper investigated the grinding chipping of the glass substrates using the electroplated diamond tools. Using four kinds of different diamonds and two diamond sizes; the strength of the diamonds was a low strength of YK-JQ-SMB and YK-JQ, a high strength of PK-5, and a middle strength of P5Y-J. Comparing the different (1) diamond types and size, (2) feed rate, and (3) up grinding and down grinding would be studied to analyze the effect of diamond protrusion and working particles of the tools on the chipping of glass grinding edge, drilling holes

Стилі APA, Harvard, Vancouver, ISO та ін.

8

lee, Chia-lin, and 李佳霖. "A study of high speed grinding alumina ceramic for diamond tools." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/35512534705375826418.

Повний текст джерела

Анотація:

碩士<br>華梵大學<br>機電工程學系博碩專班<br>97<br>The purpose of the paper was to investigate the rough grinding and fine grinding of alumina ceramic using small diameter of diamond tools under high spindle speed. The effect of the grinding conditions on diamond wear, grinding forces, and surface roughness was discussed. The four types of experiments were carried out: (1) the electroplated diamond tool and metal sintered diamond tool with grit mesh of #270/325 were used to grind alumina. Toolmaker microscope and SEM were used to observe the diamond wear conditions after and before grinding and calculate their

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Yang, Yueh-Lin, and 楊岳霖. "Performance of Hot-pressed Metal-Bonded Diamond Tools in Grinding Alumina." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/31751735966829649626.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>機械工程系<br>96<br>Sintered alumina parts large in dimension usually require intensive grinding before a final structure is attained. In order to enhance the yield rate of machining such large alumina parts, diamond tools having self-dressing behavior are required. The goal of this study was to improve the self-dressing behavior of metal-bond diamond tools by varying the composition of the bonding matrix. Metal-bond diamond tools using copper based alloys as the bonding matrices were used to grind sintered alumina using a CNC center-milling machine. Variation in the composition o

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Chen, Ying-Jui, and 陳盈瑞. "Ultrasonic Vibration Assisted Grinding For Ceramic Matrix Composites Using Diamond Tools." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/7c7b9h.

Повний текст джерела

Анотація:

碩士<br>國立勤益科技大學<br>機械工程系<br>105<br>The industryhave become increasingly demanding for the performance of engineering structure materials. The ultra precision grinding technology and material forming technology for the various toughened and reinforced composite material have become the focus of research in the world. The ceramic matrix composites due to its excellent performance of high hardness, high compressive strength, high temperature resistance, are prospective materials in the manufacturing field Using grinding wheel to grind this material is currently the main processing method. However,

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Diamond grinding tool"

1

Zakharenko, I. P. Sverkhtverdye abrazivnye materialy v instrumentalʹnom proizvodstve. Gol. izd-vo izdatelʹskogo obʺedinenii͡a︡ "Vyshcha shkola", 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Diamond grinding tool"

1

Ahsan, A., M. Kahlmeyer, E. Fedotov, and S. Böhm. "Polycrystalline Diamond Tool for Milling of Granite." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_69.

Повний текст джерела

Анотація:

AbstractState of the art in tooling for cutting granites are sintered grinding tools having synthetic diamond grains bound together in metal matrix usually a cobalt copper alloy. Routers for CNC machining of stone surfaces come in various forms such as face milling tools, end milling cutters, edge profiling tools etc. and have either segmented or continuous grit. Characteristic of the grinding processes the material removal rates are relatively low and inefficient compared to geometrically defined tools such as milling tools for metal or wood. In this study, a milling tool with four vacuum bra

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Li, Zeng Qiang, Tao Sun, Yong Da Yan, Jun Jie Zhang, Ying Chun Liang, and Shen Dong. "Lapping Process of Diamond Cutting Tool by Molecular Dynamics Simulating." In Advances in Grinding and Abrasive Technology XIV. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.249.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Huang, Hui, Chong Fa Huang, and Xi Peng Xu. "Force Characteristics in Drilling of Engineering Ceramic with a Brazed Diamond Tool." In Advances in Grinding and Abrasive Technology XIV. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.153.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Ching-hua, Chang, J. V. In, Z. J. Ming, J. Tung, and J. Gin. "A Study of Technology of Grinding and Polishing Diamond Turning Tool and Cemented Carbide Precision Turning Tool." In Toward the Factory of the Future. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-82580-4_34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Feng, Xuewen, Bin Zhao, Haitao Ma, and Jiayu Wu. "Multi-Information Fusion Online Recognition of Diamond Tool Grinding Direction Based on IPSO-RBF." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-6937-7_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Moriyasu, S., T. Nakagawa, and H. Ohmori. "New Roughing Tool for Efficient Aspherical Cutting and Grinding of Ductile Materials with Multi-Point Diamond Pillars." In Rapid Product Development. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6379-2_27.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Li, Zheng Qiang, T. Sun, L. Q. Shi, and Shen Dong. "Study on Lapping Process of Diamond Cutting Tools." In Advances in Grinding and Abrasive Technology XIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-986-5.104.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Yu, Ai Bing, A. J. Wang, C. G. Luan, and S. F. Chen. "Bonds of Electroplated Diamond Tools for Optical Glass Machining." In Advances in Grinding and Abrasive Technology XIII. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-986-5.81.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Pan, Bing Suo, and Yang Yang. "A High-Speed Nickel Plating Bath for Manufacture of Diamond Tools." In Advances in Grinding and Abrasive Technology XIV. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.68.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Yu, Yi Qing, Xiao Rui Tie, and Xi Peng Xu. "Mechanical Behaviors of Metal-Bonded Diamond Abrasive Tools with Different Grit Sizes." In Advances in Grinding and Abrasive Technology XIV. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.73.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Diamond grinding tool"

1

Lohnes, Christine E., and David J. Quesnel. "AFM Microscopy of Ground Glass Surfaces." In Optical Fabrication and Testing. Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.omd2.

Повний текст джерела

Анотація:

The AFM can be a valuable tool used for studying the surface topography of materials. In this case, we have studied the surface topography of optical glass surfaces that have been ground with diamond matrix cutting tools. Two different tools were used in the grinding process, one ring tool contained 10 20pm diamonds and the other ring tool consisted of 6-12μm diamonds. The ring tools were set up on the OPTICAM SM system. Twelve glass samples were ground, two of each of the different optical glasses( K7, BK7, SK7, F7, SF7, and KzF6) with one sample each undergoing grinding by each of the two di

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Pratap, Ashwani, and Karali Patra. "Analysis of Polycrystalline Diamond Micro-Grinding Tool Topography Using Image Processing." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2862.

Повний текст джерела

Анотація:

Abstract Polycrystalline diamond (PCD) micro-grinding tools are shaped using different electro-discharge machining processes among which wire electro-discharge grinding (WEDG) process is widely accepted due to its capability of producing highly precise, ultra-thin and dimensionally accurate tools. Topographical analysis of the tool surface is inevitable as abrasive cutting edge density and grit protrusion heights affect the cutting process and are equally demanding parameters in modeling of the process. Analysis of micro-grinding tool topography and determining the tool surface statistics have

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Rupp, Wiktor. "Mechanism of Diamond Grinding of Glass." In Optical Fabrication and Testing. Optica Publishing Group, 1985. http://dx.doi.org/10.1364/oft.1985.wdd2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Funkenbusch, P. D., Y. Y. Zhou, C. Lohnes, et al. "Deterministic microgrinding of glass with polycrystalline diamond tools." In Optical Fabrication and Testing. Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.omc3.

Повний текст джерела

Анотація:

Metal bonded diamond tools have been used at the Center for Optics Manufacturing (COM) for the deterministic microgrinding of glass. With use of metal-bonded 2-4 micron single crystal diamonds in the final grinding step, very smooth surfaces with only a few microns of subsurface damage can be consistently manufactured. While these results are very positive, we are currently seeking means to further improve performance. In particular we are examining the effects of changing the diamond on tool performance.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Xiong, Yi-feng, Wen-hu Wang, Yao-yao Shi, et al. "Investigation on Tool Performance in Ultrasonic Vibration Assisted Cutting SiCf/SiC Ceramic Matrix Composites." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-72527.

Повний текст джерела

Анотація:

Abstract Ceramic matrix composites have been a promising advanced material due to its superior properties such as high strength and high temperature resistance. However, due to the high hardness and brittleness of reinforcement and matrix, the machining of this new material still needs to be solved. In this study, investigation of tool performance was conducted on SiC fiber reinforced SiC ceramic matrix composites using ultrasonic vibration assisted machining technique with taking advantages of decreasing cutting force, reducing tool wear and improving machinability. Three types of tools inclu

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Roll, Christopher D., Brian E. MacMillin, and Paul Funkenbusch. "Quality Testing of Diamond-Abrasive, Metal-Bond Grinding Tool Materials." In Optical Fabrication and Testing. OSA, 2010. http://dx.doi.org/10.1364/oft.2010.jmb10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Schindler, Florestan, Fritz Klocke, Richard Brocker, and Patrick Mattfeld. "A Discussion on Removal Mechanisms in Grinding Polycrystalline Diamond." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4102.

Повний текст джерела

Анотація:

In this paper, the removal mechanisms in grinding polycrystalline diamond (PCD) with vitrified bonded diamond grinding wheels are discussed fundamentally. After a short review about the history of diamond machining, the author summarizes the state of the art in PCD grinding and thus deduces gaps and a deficit in research. In order to analyze occurring removal mechanisms in PCD grinding, tool grinding tests were carried out. For the experimental investigations a conventional tool grinding machine has been modified in order to withstand process loads. Subsequent to the tests, the surface integri

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Chowdhury, M. A. K. "Grinding Wheel Surface Topography for Multiple Pass With Incremental Depth of Cut of Rotary Diamond Dresser." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53342.

Повний текст джерела

Анотація:

Grinding is often used material removal process in manufacturing. A grinding wheel has abrasive grains on its working surface and the material removal efficiency of a grinding wheel decreases with grinding operations. To restore the material removal efficiency of a grinding wheel, dressing is performed. There are several types of dressing methods and among these different methods, mechanical dressing is widely performed. In mechanical dressing, rotary diamond dresser is one of the effective dressers. The grinding wheel surface topography induced from dressing effect the performance of subseque

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Studnitzky, Thomas, Thomas Weißgärber, Alexander Strauss, Michael Jank, and Dirk Büttner. "Ordered Diamond Arrangement In A Sinter-Based AM Process." In World Powder Metallurgy 2022 Congress & Exhibition. EPMA, 2022. http://dx.doi.org/10.59499/wp225371584.

Повний текст джерела

Анотація:

Diamond based grinding or cutting tools usually consist of randomly packed diamond particles inside a metal matrix. Nevertheless it is known that an ordered arrangement of diamonds shows much better performance with defined wear of the tool, which typically leads to a longer service life time. Several approaches and patents were already published on this topic, but due to the high complexity of the manufacturing process the market penetration is still low. Fraunhofer IFAM and DiaBü have developed a modified 3D screen printing process which allows the manufacturing of cutting beads with ordered

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Gust, Darryl J., Albert J. Shih, Marc Tricard, and K. Subramanian. "A Systems Approach for Simulation and Production Implementation of Thru-Feed Centerless Grinding of Ceramics." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0796.

Повний текст джерела

Анотація:

Abstract An approach for simulation and production implementation of thru-feed centerless grinding of Transformation Toughened Zirconia ceramic using vitrified diamond grinding wheels is presented. A set of grinding tests was designed and conducted, to identify the effects of: abrasive product (diamond grit size, wheel bond type), work material type and operational factors (stock removal, thru-feed rate, number of thru-feed passes and truing and dressing methods); on grinding performance. Evaluation parameters of surface finish, grinding forces, wheel wear, and G ratio were utilized to determi

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!