Увійти

Готові списки джерел за темами / Different mills / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Different mills.

Статті в журналах з теми "Different mills"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Different mills".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Ko, Won Il, and Fanxing Gao. "Economic Analysis of Different Nuclear Fuel Cycle Options." Science and Technology of Nuclear Installations 2012 (2012): 1–10. http://dx.doi.org/10.1155/2012/293467.

Повний текст джерела

Анотація:

An economic analysis has been performed to compare four nuclear fuel cycle options: a once-through cycle (OT), DUPIC recycling, thermal recycling using MOX fuel in a pressurized water reactor (PWR-MOX), and sodium fast reactor recycling employing pyroprocessing (Pyro-SFR). This comparison was made to suggest an economic competitive fuel cycle for the Republic of Korea. The fuel cycle cost (FCC) has been calculated based on the equilibrium material flows integrated with the unit cost of the fuel cycle components. The levelized fuel cycle costs (LFCC) have been derived in terms of mills/kWh for

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Golubchik, R. M., D. V. Merkulov, E. K. Medvedev, M. V. Chepurin, and I. A. Tatarkin. "Effective broaching in mills of different design." Steel in Translation 41, no. 3 (2011): 243–45. http://dx.doi.org/10.3103/s0967091211030077.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Doria, R. M., and S. Machado. "Yang-Mills Families." JOURNAL OF ADVANCES IN PHYSICS 13, no. 4 (2017): 4927–55. http://dx.doi.org/10.24297/jap.v13i6.6173.

Повний текст джерела

Анотація:

The Yang-Mills theory structure is based on group theory. It rules the symmetry relationship where the number of potential fields transforming under a same group must be equal to the number of group generators. It defines the group valued expression from where the corresponding non-abelian symmetry properties are derived. Nevertheless based on different origins as Kaluza-Klein, fibre bundles, supersymmetry, s-model , BRST and anti-BRST algorithm, counting degrees of freedom leads to a Yang-Mills extension under the existence of different potential fields rotating under a same single grou

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Alhendi, Abeer S., Tamadher H. Ahmad, Wasan S. Albayati, Balsam Q. Almukhtar, Zahraa K. Ali, and Nuhoodh K. Al-Hayani. "Comparisons between flour qualities produced by three different mills: buhler, quadrumat, and industry mills." International Journal of Food Studies 11, no. 1 (2022): 19–27. http://dx.doi.org/10.7455/ijfs/11.1.2022.a2.

Повний текст джерела

Анотація:

Three types of mills (Buhler, Quadrumat, and industry mill) have been used to determine the effect of mill type on the quality of the produced flour. Quadrumat and Buhler mills are usually used to produce flour at a laboratory level. Flour quality has been determined physically, chemically, and rheologically. Results showed that the particle size of flour produced by Buhler mill (FPB) was finer (mostly less than 132 μm) than other produced flour, while flour produced by Quadrumat mill (FPQ) had 8% particle size bigger than 50gg, which is more than Iraqi accepted limit (5%). The moisture conten

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ali, A., M. A. Karim, L. Ali, S. S. Ali, and A. Majid. "Milling Recovery As Influenced By Different Types of Rice Mills." International Rice Research Newsletter 17, no. 2 (1992): 7. https://doi.org/10.5281/zenodo.7218735.

Повний текст джерела

Анотація:

This article 'Milling Recovery As Influenced By Different Types of Rice Mills' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Khalsa, Jan, Diana Leistner, Nadja Weller, Leilani Darvell та Ben Dooley. "Torreﬁed Biomass Pellets—Comparing Grindability in Different Laboratory Mills". Energies 9, № 10 (2016): 794. http://dx.doi.org/10.3390/en9100794.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Sagdieva, M. G., S. I. Borminskiy, Z. E. Rakhmatullaeva, A. K. Tonkikh, K. S. Sanakulov, and B. Scott. "Biohydrometallurgical Processing of Flotation Tailings from Different Copper Mills." Advanced Materials Research 20-21 (July 2007): 299–303. http://dx.doi.org/10.4028/www.scientific.net/amr.20-21.299.

Повний текст джерела

Анотація:

Two copper flotation tailings samples, one from the Almalyk Mining and Metallurgical Complex, Uzbekistan (sample designated AMMC) and the other from Whitehorse (WT), Yukon, Canada, were bioleached at laboratory scale. Acidophilic, iron- and sulphur-oxidizing cultures were enriched from the two tailings and these cultures were used for the testing. After 24 weeks of bioleaching in percolator columns 70-72% of the copper was leached from the AMMC tailings and 91-93% of the copper was leached from the WT tailings. The chalcopyritic nature of the copper and larger particle size of the AMMC tailing

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Ema, S., and R. Davies. "Cutting performance of end mills with different helix angles." International Journal of Machine Tools and Manufacture 29, no. 2 (1989): 217–27. http://dx.doi.org/10.1016/0890-6955(89)90033-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Huang, Pan Ling, Jian Feng Li, and Jie Sun. "Simulation and Optimal Selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills." Key Engineering Materials 443 (June 2010): 285–90. http://dx.doi.org/10.4028/www.scientific.net/kem.443.285.

Повний текст джерела

Анотація:

In the paper, a static milling force model for variable pitch mills was built, and the milling forces were simulated. The resultant force and its frequency spectra of variable pitch mills were analyzed compared with that of uniform pitch mills. It is shown that the standard deviation (SD) of frequency spectra amplitudes for variable pitch mills is extremely lower than that of uniform pitch mills. Through simulation for SD of frequency spectra amplitudes affected by the different cutting parameters, a pitch angles distribution of variable pitch helix end mills with lower SD of frequency spectra

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Maulana, Fajri, Fadhli Fajri, Bunga Putri Febrina, and Dwi Sandri. "Physical Quality Test Of Rice Bran From Different Milling In Tanah Laut District." JURNAL ILMIAH PETERNAKAN TERPADU 12, no. 3 (2024): 210. https://doi.org/10.23960/jipt.v12i3.p210-219.

Повний текст джерела

Анотація:

This research aims to determine the physical quality of rice bran from different mills in Tanah Laut Regency. Data were collected in this research by means of observation and interviews at five different mills in Tanah Laut, namely Panyipatan, Bumi Makmur, Takisung, Kurau and Pelaihari Districts. Data collection was continued with analysis of the physical quality of the bran in the laboratory. Data was processed manually and analyzed descriptively. The parameters measured for the physical quality of rice bran are water content, pile density, pile compaction density, pile angle and specific gra

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Putri, Ayu Sang, Novi Rosanti, and Yuliana Saleh. "ANALISIS KINERJA PENGGILINGAN PADI PADA BERBAGAI SKALA USAHA STUDI KASUS DI KECAMATAN BUAY MADANG TIMUR KABUPATEN OKU TIMUR PROVINSI SUMATERA SELATAN." Jurnal Ilmu-Ilmu Agribisnis 12, no. 2 (2024): 117. http://dx.doi.org/10.23960/jiia.v12i2.7314.

Повний текст джерела

Анотація:

This research aims to analyze the process of procuring raw materials and the performance of rice mills at different business scales in East Buay Madang District. This research used a case study method on rice mills with different business scales in East Buay Madang District, East OKU Regency, South Sumatra. The rice mill owner was the respondent in this research. Data collection was carried out from March to April 2021. The data analysis method used was descriptive qualitative and quantitative analysis. The results showed that the procurement of raw materials for rice mills at different busine

Стилі APA, Harvard, Vancouver, ISO та ін.

12

He, Y., and Zheng Qiang Yao. "Comparative Experiments for Different End Mills of Indexable Inserts with 3-D Chip Breaker." Materials Science Forum 471-472 (December 2004): 775–78. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.775.

Повний текст джерела

Анотація:

End mills are very widely used in machining metal. In this paper, based on analysis of three different end milling indexable inserts with 3-D chip breaker, the influence of different chip breaker on cutting force, chip deformation and machined accuracy are studied by comparative experiments. The results show that the cutting effect of end mills with indexable inserts can be improved by optimization of 3-D chip breaker and suitable for different machining condition.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Liu, Xiaochan, Yong Zang, Zhiying Gao, and Lingqiang Zeng. "Time Delay Effect on Regenerative Chatter in Tandem Rolling Mills." Shock and Vibration 2016 (2016): 1–15. http://dx.doi.org/10.1155/2016/4025650.

Повний текст джерела

Анотація:

The interstand tension coupling effect and strip gauge variation passed on to next stand with time delay are the main causes for regenerative chatter in tandem rolling mills. To study the effect of different factors on the stability of tandem rolling mills, different models considering different interstand factors were built. Through stability analysis of these models by employing the Lyapunov indirect method and integral criterion, more detailed and quantitative explanation is put forward to regenerative chatter mechanism in rolling. To study the time delay effect as a single factor on the st

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kumar, Arvind, Rina Sahu, and Sunil Kumar Tripathy. "Energy-Efficient Advanced Ultrafine Grinding of Particles Using Stirred Mills—A Review." Energies 16, no. 14 (2023): 5277. http://dx.doi.org/10.3390/en16145277.

Повний текст джерела

Анотація:

The present literature review explores the energy-efficient ultrafine grinding of particles using stirred mills. The review provides an overview of the different techniques for size reduction and the impact of energy requirements on the choice of stirred mills. It also discusses the factors, including the design, operating parameters, and feed material properties, influencing the grinding performance. The review concludes that stirred mills have significant potential for achieving the energy-efficient ultrafine grinding of particles. Stirred mills have unique designs and operations, which prov

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Min, Li, Biao Bai, Yu Hou Wu, and De Hong Zhao. "Efficient NC Tool Path Planning Based on the Subdivision of Sculptured Surface." Applied Mechanics and Materials 635-637 (September 2014): 497–501. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.497.

Повний текст джерела

Анотація:

In this paper, we have presented a method to generate efficient NC tool paths based on the surface subdivision. The main objective is to achieve high efficiency in the machining of sculptured surface. The NC machining efficiency can be improved by segmenting the whole surface into distinct areas according to the characters of sculptured surface and by using different size mills and different tool path planning methods to machine the areas. The iso-parametric method and large mills are used in the curvature changing little areas. While the iso-scallop method and small mills are used in curvatur

Стилі APA, Harvard, Vancouver, ISO та ін.

16

ZHAO, WEN. "STATEFINDER DIAGNOSTIC FOR THE YANG–MILLS DARK ENERGY MODEL." International Journal of Modern Physics D 17, no. 08 (2008): 1245–54. http://dx.doi.org/10.1142/s0218271808012796.

Повний текст джерела

Анотація:

We study the statefinder parameters in the Yang–Mills condensate dark energy models, and find that the evolving trajectories of these models are different from those of other dark energy models. We also define two eigenfunctions of the Yang–Mills condensate dark energy models. The values of these eigenfunctions are quite close to zero if the equation of state of the Yang–Mills condensate is not far from -1, which can be used to simply differentiate between the Yang–Mills condensate models and other dark energy models.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Trcka, Tomas, Ales Polzer, and Josef Sedlak. "END MILLS WITH PCD INSERTS SHARPENED BY DIFFERENT ELECTRICAL TECHNOLOGIES." MM Science Journal 2018, no. 01 (2018): 2192–97. http://dx.doi.org/10.17973/mmsj.2018_03_201759.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Ulusoy, Ugur, and M. Yekeler. "Dynamic image analysis of calcite particles created by different mills." International Journal of Mineral Processing 133 (December 2014): 83–90. http://dx.doi.org/10.1016/j.minpro.2014.10.006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Panigrahy, P. K., G. Goswami, J. D. Panda, and R. K. Panda. "Differential comminution of gypsum in cements ground in different mills." Cement and Concrete Research 33, no. 7 (2003): 945–47. http://dx.doi.org/10.1016/s0008-8846(02)00992-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Pasechnik, Roman, and Michal Šumbera. "Different Faces of Confinement." Universe 7, no. 9 (2021): 330. http://dx.doi.org/10.3390/universe7090330.

Повний текст джерела

Анотація:

In this review, we provide a short outlook of some of the current most popular pictures and promising approaches to non-perturbative physics and confinement in gauge theories. A qualitative and by no means exhaustive discussion presented here covers such key topics as the phases of QCD matter, the order parameters for confinement, the central vortex and monopole pictures of the QCD vacuum structure, fundamental properties of the string tension, confinement realisations in gauge-Higgs and Yang–Mills theories, magnetic order/disorder phase transition, among others.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Akhtar, Dr Pervez, and Dr Iqbal Shah. "CORPORATE SOCIAL RESPONSIBILITY: A COMPARATIVE STUDY OF CSR PRACTICES IN TOBACCO AND SUGAR MILLS SECTOR INDUSTRIES OF KHYBER PAKHTUNKHWA." International Journal of Management & Entrepreneurship Research 1, no. 2 (2020): 59–70. http://dx.doi.org/10.51594/ijmer.v1i2.6.

Повний текст джерела

Анотація:

Aim of the study was to find out and compare the level of understanding and practices of CSR in the two different sectors of economy in Khyber Pakhtunkhwa. Purpose of the study was to find out and compare the understanding of corporate social responsibility in these two different types of large scale industries of Khyber Pakhtunkhwa. That is, how well the management of the Tobacco sector and Sugar mills industry understands the CSR phenomena and how effective are their CSR practices. The study was restricted to the highest managers by using open and pre-structured questionnaire. The qualitativ

Стилі APA, Harvard, Vancouver, ISO та ін.

22

BENAOUM, H. B., and M. LAGRAA. "Uq(2) YANG–MILLS THEORY." International Journal of Modern Physics A 13, no. 04 (1998): 553–68. http://dx.doi.org/10.1142/s0217751x98000238.

Повний текст джерела

Анотація:

A Yang–Mills theory is presented using the Uq(2) quantum group. Unlike previous works, no assumptions are required — between the quantum gauge parameters and the quantum gauge fields (or curvature) — to get the quantum gauge variations of the different fields. Furthermore, an adequate definition of the quantum trace is presented. Such a definition leads to a quantum metric, which therefore allows us to construct a Uq(2) quantum Yang–Mills Lagrangian. The Weinberg angle θ is found in terms of this q metric to be [Formula: see text].

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Jirasuwankul, Nirudh, and C. Manop. "Mathematical Modeling of Energy Efficiency in Thai Sugar Mills: a Case Study of Different Production Scales from Three Mills." International Journal on Engineering Applications (IREA) 13, no. 1 (2025): 68. https://doi.org/10.15866/irea.v13i1.24530.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

HART, PETER W. "Differences in bleaching responses from fungal- versus bacterial-derived enzymes." March 2012 11, no. 3 (2012): 21–27. http://dx.doi.org/10.32964/tj11.3.21.

Повний текст джерела

Анотація:

Several mills in North America have been successful in using xylanase enzymes expressed from Trichoderma reesei (a fungus) as part of their bleaching sequence for many years. These mills process hardwood and softwood species, with and without oxygen delignification. These mills also use three-, four-, and five-stage bleaching sequences. North American mills tend to report increased pulp brightness ceilings and decreased bleaching costs as benefits associated with the application of enzymes in the bleaching process. Laboratory testing suggests that eucalyptus pulp is highly susceptible to funga

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Lieberman, Yu L., and V. A. Shterenson. "THE USE OF DIAMOND-LIKE FILMS TO INCREASE THE DURABILITY OF END MILLS." Spravochnik. Inzhenernyi zhurnal, no. 278 (May 2020): 40–44. http://dx.doi.org/10.14489/hb.2020.05.pp.040-044.

Повний текст джерела

Анотація:

Modern engineering is focused on high-tech reliable automated equipment, the use of which is effective in the presence of high-quality wear-resistant tools. The article discusses the results of the study DLC-films end mills resistance in structural carbon and alloy steels processing. Coatings were obtained by cathodic pulse sputtering of graphite in a vacuum chamber. There are presented results of the study of the influence of diamond-like (DLC) films on the end mills wear resistance. It is shown that the application of diamond-like films on the end mills uniquely increases the resistance of t

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Lieberman, Yu L., and V. A. Shterenson. "THE USE OF DIAMOND-LIKE FILMS TO INCREASE THE DURABILITY OF END MILLS." Spravochnik. Inzhenernyi zhurnal, no. 278 (May 2020): 40–44. http://dx.doi.org/10.14489/hb.2020.05.pp.040-044.

Повний текст джерела

Анотація:

Modern engineering is focused on high-tech reliable automated equipment, the use of which is effective in the presence of high-quality wear-resistant tools. The article discusses the results of the study DLC-films end mills resistance in structural carbon and alloy steels processing. Coatings were obtained by cathodic pulse sputtering of graphite in a vacuum chamber. There are presented results of the study of the influence of diamond-like (DLC) films on the end mills wear resistance. It is shown that the application of diamond-like films on the end mills uniquely increases the resistance of t

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Hossain, Md Mosharaf, Abu Sayed Md Abdul Hannan, Md Mostofa Kamal, Mohammad Abul Hossain, and Sharmin Zaman. "Determination of Heavy Metals (Pb, Cd) and Evaluation of Commercially Produced Broiler Feed Available in Bangladesh." European Journal of Agriculture and Food Sciences 4, no. 4 (2022): 6–10. http://dx.doi.org/10.24018/ejfood.2022.4.4.511.

Повний текст джерела

Анотація:

The study was conducted to evaluate the quality of ready-made broiler feed (starter and grower) procured from seven different feed mills of five divisions of Bangladesh. Seven feed mills were selected randomly from the different region of Bangladesh. Broiler starter and grower feed were collected from each of the feed mills by purchasing method for assessing the heavy metal contents i.e., Pb and Cd in this study. A total of 210 feed samples (105 starter and 105 grower) was collected from the selected feed mills and analyzed to determine the concentration of toxic metals (Pb, Cd) in feed materi

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Voiloshnikov, G. I., and A. Yu Chikin. "Stirred media mills of fine and ultrafine grinding for subsequent beneficiation operations." iPolytech Journal 28, no. 3 (2024): 504–12. http://dx.doi.org/10.21285/1814-3520-2024-3-504-512.

Повний текст джерела

Анотація:

This paper presents a brief review of the designs, characteristics, and operating parameters of Stirred media mills supplied by foreign manufacturers. An analysis of information on Stirred media mills , which are used to improve the efficiency of beneficiation and metallurgical operations, is carried out using available publications. The obtained results indicate the inexpediency of using conventional drum ball mills for flotation separation of ores and concentrates with a fine interpenetration of minerals. The application of conventional mills in extraction of ores and concentrates resistant

Стилі APA, Harvard, Vancouver, ISO та ін.

29

POPOWICZ, ZIEMOWIT. "THE SUPERSYMMETRIC GAUGE FIELD COPIES." Modern Physics Letters A 02, no. 11 (1987): 861–68. http://dx.doi.org/10.1142/s0217732387001099.

Повний текст джерела

Анотація:

The examples of Wu-Yang ambiguity in the supersymmetric Yang-Mills theory are given. We describe two different manners of copying the superconnection for the N = 1, N = 3 supersymmetric SU(2) Yang-Mills field theory, providing the same field strength superfield tensor.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Orlov, G. A., A. G. Orlov, and E. A. Kungurov. "A review of pipes reduction methods aimed at end longitudinal different-walled decreasing." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 75, no. 1 (2019): 86–94. http://dx.doi.org/10.32339/0135-5910-2019-1-86-94.

Повний текст джерела

Анотація:

Formation of incrassate pipes end is one of main drawbacks of pipes reducing with tensioning method. Therefore, the matter of perfection of reducing mills designs, rollers passes, rolling regimes aimed at end shearing decreasing is very actual. A review of steel pipes hot rolling methods at multi-stand reduction-tensioning mills was carried out, aimed at elaborating of measures for decreasing of end longitudinal different-walled. Techniques of pipe end parts rolling considered, including control of rotary speed regimes of adjacent stands rollers; changing of distance between stands; increasing

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Kuroda, Kouichi, Takashi Kuboki, Masayoshi Akiyama, and Chihiro Hayashi. "A Study on the Direct Applicability of a Set of Grooves of Multi-Roll Wire Mills for Different Materials." Journal of Manufacturing Science and Engineering 123, no. 2 (2000): 272–78. http://dx.doi.org/10.1115/1.1360695.

Повний текст джерела

Анотація:

Investigations were carried out on the direct applicability of a set of grooves of multi-roll wire mills for different materials having different stress-strain curves. Special evaluation was made on the stability of the geometry among different materials when rolled under the same mill setting conditions. Influence of inter-stand tension generated by the change in roll force due to the difference in stress-strain curve was studied both numerically and experimentally. A group of three-roll and four-roll-type mills is superior to two-roll-type mill in getting rid of the time for mill setting.

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Dubinina, A. A., T. M. Popova, S. O. Lenert, and V. S. Hershun. "COMPLEX ASSESSMENT OF QUALITY OF FRUITS OF MILLS OF DIFFERENT VARIETIES." Scientific notes of Taurida National V.I. Vernadsky University. Series: Technical Sciences 2, no. 2 (2020): 105–10. http://dx.doi.org/10.32838/2663-5941/2020.2-2/18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Trcka, Tomas, Ales Polzer, and Josef Sedlak. "SHOULDER END MILLS WITH PCD INSERTS SHARPENED BY DIFFERENT ELECTRICAL TECHNOLOGIES." MM Science Journal 2018, no. 04 (2018): 2536–42. http://dx.doi.org/10.17973/mmsj.2018_11_201822.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Dall'Olio, Pietro. "Dyson-Schwinger equations for IR Yang-Mills theory in different dimensions." Journal of Physics: Conference Series 378 (August 10, 2012): 012037. http://dx.doi.org/10.1088/1742-6596/378/1/012037.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Basiouny, M., and A. El-Yamani. "PERFORMANCE EVALUATION OF TWO DIFFERENT HAMMER MILLS FOR GRINDING CORN COBS." Journal of Soil Sciences and Agricultural Engineering 7, no. 1 (2016): 77–87. http://dx.doi.org/10.21608/jssae.2016.39322.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Kovelenov, N. Yu, S. V. Bolotskikh, S. V. Mikhailov, and A. S. Mikhailov. "Wear resistance of hard-alloy disk mills with different flank geometry." Russian Engineering Research 37, no. 2 (2017): 144–47. http://dx.doi.org/10.3103/s1068798x17020125.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Campo, F., and Jairo A. Escobar Gutiérrez. "2D Model for Ball Mills." Materials Science Forum 530-531 (November 2006): 282–85. http://dx.doi.org/10.4028/www.scientific.net/msf.530-531.282.

Повний текст джерела

Анотація:

This work develops a mathematical model that explains the ball mills operational speed. The scope of the model is defined by the powder as the number of particles per cm3 and the Relevance defined as the ratio between different forces. In this study, the Relevance is defined as the ratio between superficial tension and inertial forces. The conditions for a free flowing powder and a single particle are differenced and non-dimensional numbers are found. The model proposed use the friction force between mill walls and the powder mass is related by a friction coefficient that can be calculated fro

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Fragnière, Greta, Aleksandra Naumann, Marcel Schrader, Arno Kwade, and Carsten Schilde. "Grinding Media Motion and Collisions in Different Zones of Stirred Media Mills." Minerals 11, no. 2 (2021): 185. http://dx.doi.org/10.3390/min11020185.

Повний текст джерела

Анотація:

Product fineness during grinding in stirred media mills is mainly influenced by the specific energy input, the stress energy transferred by the colliding grinding media and the stress frequency. The stress energy from grinding media collisions is heterogeneously distributed in stirred media mills. Herein, in order to characterize the stress energy distribution and the local grinding media collision frequencies, the grinding media motion was calculated using discrete element method (DEM) simulations coupled with computational fluid dynamics (CFD). The local grinding media concentration, velocit

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Zhao, Lin Hui, Jian Cheng Zhang, and Wei Su. "Research on Tool Wear Form in Micro Turn-Milling Process." Applied Mechanics and Materials 184-185 (June 2012): 663–67. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.663.

Повний текст джерела

Анотація:

In micro machining, turn-milling tool wear is a key factor for part surface quality. This paper carries on experiments on end mills wear in micro turn-milling machining, aiming to research the wear form and provide some reference data for developing wear standard of small diameter end mills. To measure wear condition of end mills, machine vision technique is utilized. This paper designs and sets up an online end mill wear measurement system for a micro turn-milling process center. With a series of experiments on small diameter end mills, wear conditions of different cutting positions are resea

Стилі APA, Harvard, Vancouver, ISO та ін.

40

OH, SUNG-JIN. "GAUGE CHOICE FOR THE YANG–MILLS EQUATIONS USING THE YANG–MILLS HEAT FLOW AND LOCAL WELL-POSEDNESS IN H1." Journal of Hyperbolic Differential Equations 11, no. 01 (2014): 1–108. http://dx.doi.org/10.1142/s0219891614500015.

Повний текст джерела

Анотація:

We introduce a novel approach to the problem of gauge choice for the Yang–Mills equations on the Minkowski space ℝ1+3, which uses the Yang–Mills heat flow in a crucial way. As this approach does not possess the drawbacks of the previous approaches, it is expected to be more robust and easily adaptable to other settings. As a first application, we give an alternative proof of the local well-posedness of the Yang–Mills equations for initial data [Formula: see text], which is a classical result of Klainerman and Machedon (1995) that had been proved using a different method (local Coulomb gauges).

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Sarwar, Muhammad, Warda Muzaffar, and Waqas Raza Arshad. "EVALUATION OF PROMISING AND COMMERCIAL SUGARCANE CLONES AT DIFFERENT LOCATIONS IN THAL AND SOUTHERN PUNJAB." Pakistan Sugar Journal 34, no. 3 (2020): 16–22. http://dx.doi.org/10.35380/sugar.034.03.0148.

Повний текст джерела

Анотація:

Topographical areas better adapted for sugar cane cultivation must be identified and preserved, for this study Indus valley river delta in South Punjab represents promising features for prosperous sugarcane cultivation (lower water pumping costs due to higher water tables, sugarcane being flood resistant crop in Pakistan. Eight sugarcane varieties and eight promising clones were grown on different locations in Punjab at farmer’s field using RCBD with three replications. The objective of this study is to evaluate varieties under different ecological zones. These clones were tested for their pro

Стилі APA, Harvard, Vancouver, ISO та ін.

42

MUSAYEV, S. "ON THE EQUILIBRIUM DISTRIBUTION OF THE STOCHASTICALLY QUANTIZED YANG-MILLS THEORY." Modern Physics Letters A 09, no. 13 (1994): 1213–19. http://dx.doi.org/10.1142/s0217732394001039.

Повний текст джерела

Анотація:

The structure of the stochastically quantized Yang-Mills theory with the Zwanziger gauge fixing term in the equilibrium limit is explored. The theory turns out to be extremely sophisticated and includes an infinite number of nonlocal vertices. It is the quantum Yang-Mills theory in the gauge different from the ones familiar to us.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Liu, Jiancheng, Feng Shi, Yecheng Sun, and Peng Li. "An ADS-Based Sparse Optimization Method for Sonar Imaging Sensor Arrays." Applied Sciences 10, no. 9 (2020): 3176. http://dx.doi.org/10.3390/app10093176.

Повний текст джерела

Анотація:

The Mills Cross sonar sensor array, achieved by the virtual element technology, is one way to build a low-complexity and low-cost imaging system while not decreasing the imaging quality. This type of sensor array is widely investigated and applied in sensor imaging. However, the Mills Cross array still holds some redundancy in sensor spatial sampling, and it means that this sensor array may be further thinned. For this reason, the Almost Different Sets (ADS) method is proposed to further thin the Mills Cross array. First, the original Mills Cross array is divided into several transversal linea

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Karmazina, Iryna, Volodymyr Kukhar, Elena Balalayeva, Alla Larkina, and Valentina Kashintseva. "Experimental methodology for tinplate rolling on a laboratory mill." E3S Web of Conferences 110 (2019): 01001. http://dx.doi.org/10.1051/e3sconf/201911001001.

Повний текст джерела

Анотація:

The review of cold rolling mills used for the production of tinplate and thin tinplate in the world is presented. World tinplate production is characterized by the desire to reduce the thickness of its steel base. In connection with the variety of tinplate rolling mills, peculiarities of the deformation conditions of thin tinplate, complexity of the technological process and theoretical prediction of the rolling process indices, especially in terms of the theoretical model universality, as well as paucity of existing practical data, the necessity of experimental research is substantiated. Expe

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Demidov, A. V., and I. A. Muraveiko. "The experience of modernization of mills of wet wire drawing for the metal wire cord." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 4 (January 14, 2019): 97–102. http://dx.doi.org/10.21122/1683-6065-2018-4-97-102.

Повний текст джерела

Анотація:

There is a tendency in recent years to use by the world’s leading manufacturers of tires metal wires of small diameter (0,175– 0,20 mm) with higher strength, which requires the use of increased total number of extracts on wet drawing. The possibility of increasing the compression can be limited not only by the ductility of the processed metal, but also by the design of the existing drawing mills, in particular, by the insufficient total passport kinematic drawing and, as a consequence, to the excessive sliding of the wire relative to the drawing washers. Results of modernization of mills of di

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Han, Sheng Chao, Yan Chen, Jiu Hua Xu, and Jing Wen Zhou. "Experimental Study of Tool Wear in Milling Multidirectional CFRP Laminates." Materials Science Forum 770 (October 2013): 276–80. http://dx.doi.org/10.4028/www.scientific.net/msf.770.276.

Повний текст джерела

Анотація:

This study aims to investigate the wear of coated end mills when milling Carbon fiber reinforced polymer (CFRP) composites. Four different types of end mills are used in the milling experiments to identify the influence of tool geometry and material on tool wear. Cutting forces and wear mechanisms of coated mills are also discussed. Through the contrast experiment, diamond coated multitooth router shows the best performance with the smallest cutting force and the least wear extent under the same cutting parameter. The major failure mechanisms of coated tools are breakthrough of coating, coatin

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Shpylovyi, K. L., L. V. Shpylovyi, V. S. Biletskyi, and O. I. Komarova. "TECHNIQUE AND TECHOLOGY OF RARE-METAL ORES DESINTEGRATION AND GRAVITY-BASED BENEFICATION." ACADEMIC JOURNAL Series: Industrial Machine Building, Civil Engineering 1, no. 48 (2017): 273–89. http://dx.doi.org/10.26906/znp.2017.48.811.

Повний текст джерела

Анотація:

On the base of the analysis of centrifugal concentrators designs there has been justified the selection of apparatus for the rare-metal ores benefication. Process of pyrochlore ore grinding in mills of different types has been investigated and the expediency of use of impact-centrifugal action mills to ensure selectivity of minirals disclosure has been founded. Efficient technical and technological parameters of the centrifugal action mills have been justified on the base of active experimental method. The influence of disintegration metheds on technologival indication of rare-metal ore benefi

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Alvarez, Juan, Steffen Porwollik, Idoia Laconcha, et al. "Detection of a Salmonella enterica Serovar California Strain Spreading in Spanish Feed Mills and Genetic Characterization with DNA Microarrays." Applied and Environmental Microbiology 69, no. 12 (2003): 7531–34. http://dx.doi.org/10.1128/aem.69.12.7531-7534.2003.

Повний текст джерела

Анотація:

ABSTRACT We performed an epidemiological study on Salmonella isolated from raw plant-based feed in Spanish mills. Overall, 32 different Salmonella serovars were detected. Despite its rare occurrence in humans and animals, Salmonella enterica serovar California was found to be the predominant serovar in Spanish feed mills. Different typing techniques showed that isolates of this serovar were genetically closely related, and comparative genomic hybridization using microarray technology revealed 23 S. enterica serovar Typhimurium LT2 gene clusters that are absent from serovar California.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ali, Sabah, and Hiba Alwan. "Measurements of Vibration and Noise Level at Different Cement Companies." Tikrit Journal of Engineering Sciences 27, no. 2 (2020): 14–21. http://dx.doi.org/10.25130/tjes.27.2.02.

Повний текст джерела

Анотація:

The aim of this article is to compare Vibration and Noise measurements caused by different types of Machines at cement factories with the standard evaluation criteria of Vibration ISO 2631 – 4 EVS – EN 5349 – 2 and Noise following the standard ISO 9612 – 2009. Two cement companies were chosen, the first is located at Baddish district, 30km west of Mosul city (Iraq), which is called Baddish general cement company, while the other is located south of Mosul, and is called Hammam Al-Alil general cement company. Three stations were chosen for each company (raw materials grinding mills, cement grind

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Koda, Risa, Hiroshi Usuki, Masahiro Yoshinobu, et al. "Effect of Work Material’s Hardness on Cutting Performance of TiAlN- and CrAlN-Coated Cutting Tools." Key Engineering Materials 656-657 (July 2015): 231–36. http://dx.doi.org/10.4028/www.scientific.net/kem.656-657.231.

Повний текст джерела

Анотація:

For better selection of coated cutting tools, TiAlN (Ti50Al50N) and CrAlN (Cr50Al50N) coatings were deposited onto ball-nose and square end mills using arc evaporation, and their cutting performances were evaluated using steel workpieces of various hardnesses. In particular, cutting tests were performed on three types of workpieces, made from S50C, SKD61, and SKD11 steels, having Brinell hardness numbers of HB220, HRC40, and HRC60, respectively. The results of the cutting experiments were elucidated and discussed in terms of the mechanical properties and anti-oxidation resistances of the diffe

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!