Увійти

Готові списки джерел за темами / Discharge chamber

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Discharge chamber"

Автор: Grafiati

Опубліковано: 30 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Discharge chamber".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Discharge chamber"

1

Bulat P. V., Volkov K. N., Esakov I. I., Lavrov P.B., and Ravaev A. A. "Electrodynamic model of combustion chamber using subcritical streamer discharge to ignite fuel mixture." Technical Physics 92, no. 5 (2022): 570. http://dx.doi.org/10.21883/tp.2022.05.53672.1-22.

Повний текст джерела

Анотація:

Various electrodynamic models of a combustion chamber, in which an initiated subcritical streamer discharge is used to ignite a combustible mixture, are considered. To localize the discharge in the working chamber, discharge initiators are used based on half-wave electromagnetic vibrators with resonant properties. The dependences of the structure of the electric fields that form the discharge on the geometric parameters of the discharge initiator are obtained on the basis of numerical calculations, and the issues of matching the chamber with the radiation generator are considered. Comparison o

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Булат, П. В., К. Н. Волков, И. И. Есаков, П. Б. Лавров та А. А. Раваев. "Электродинамическая модель камеры сгорания, использующей инициированный подкритический стримерный разряд для поджигания топливной смеси". Журнал технической физики 92, № 5 (2022): 676. http://dx.doi.org/10.21883/jtf.2022.05.52371.1-22.

Повний текст джерела

Анотація:

Various electrodynamic models of a combustion chamber, in which an initiated subcritical streamer discharge is used to ignite a combustible mixture, are considered. To localize the discharge in the working chamber, discharge initiators are used based on half-wave electromagnetic vibrators with resonant properties. The dependences of the structure of the electric fields that form the discharge on the geometric parameters of the discharge initiator are obtained on the basis of numerical calculations, and the issues of matching the chamber with the radiation generator are considered. Comparison o

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kosenkov, V.M. "Influence of Vapor-Gas Cavity on Pressure Field in Closed Discharge Chamber with Rigid Walls." Электронная oбработка mатериалов 3-4, no. 56 (2020): 42–52. https://doi.org/10.5281/zenodo.3970429.

Повний текст джерела

Анотація:

The pressure field in discharge chambers of a limited volume, with rigid walls, very often has a great influence on the efficiency of technological processes; therefore, its determination is an urgent task. As a result of the electric discharge in the liquid filling of the discharge chamber, in it, a cavity with a higher compressibility is formed than the liquid in the chamber. At the discharge stage, this cavity is filled with non-ideal plasma, and after discharge, liquid vapor and gases are dissolved in it (vapor-gas cavity). Its pulsations form a pressure field in the discharge chamber. The

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Awoji, Michael O., Audu D. Onoja, and Mathias I. Echi. "Synthesis of Graphene via ARC Discharge and Its Characterization: A Comparative Approach." East European Journal of Physics, no. 1 (March 2, 2023): 252–57. http://dx.doi.org/10.26565/2312-4334-2023-1-34.

Повний текст джерела

Анотація:

Herein, few layer graphene was synthesize using two arc discharge chambers of different volumes to ascertain the influence of chamber size on the quality and yield of graphene. In both arc discharge chambers (A and B), graphite rods were ignited at arc current of 200 A and pressure of 500 Torr to produce vaporized carbon atoms which were deposited on the chamber wall. The synthesized graphene was characterized using the combined effect of UV spectroscopy, X-ray diffraction, Raman spectroscopy, scanning electron spectroscopy and transmission electron spectroscopy. It was observed that, an incre

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Wang, Pengcheng, Bangle Zhu, Jiaming Liu, et al. "Influence of the edge effect of the solenoid magnetic field on the discharge process of magnetron sputtering in long and narrow chambers." Journal of Instrumentation 19, no. 09 (2024): P09027. http://dx.doi.org/10.1088/1748-0221/19/09/p09027.

Повний текст джерела

Анотація:

Abstract The fourth-generation light source or future particle accelerators have compact vacuum systems, resulting in a small flow conductance of the beam chamber. The development of NEG (Non-Evaporable Getters) films technology with distributed pumping is a good solution. This technology can obtain a pressure distribution with a small pressure gradient and an ultra-high vacuum of 10-8 Pa inside the vacuum chambers. In the magnetron sputtering process for NEG coating, the inhomogeneity of the magnetic field at the edge of the solenoid is a key parameter for affecting the stability of the magne

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Косенков, В. М., and В.М. Бычков. "Influence of some axisymmetric stepped shapes of discharge chambers on effectiveness of electrohydraulic forming." Elektronnaya Obrabotka Materialov 54 (February 15, 2018): 63–69. https://doi.org/10.5281/zenodo.1168349.

Повний текст джерела

Анотація:

A mathematical simulation of the electrohydraulic forming using some types of stepped axisymmetric discharge chambers is performed. The mathematical model was tested on the base of experimental data obtained using the optical method of measuring the deflection of a plate. It is shown that the change in the shape of the discharge chamber can significantly affect the efficiency of electrohydraulic forming with equal parameters of the discharge circuit. It is found that the discharge chamber of the conical shape had the highest forming efficiency than all other discharge chambers considered in th

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Bereka, V. O., and I. P. Kondratenko. "MATCHING OF COMPATIBLE WORK OF SHORT HIGH-VOLTAGE PULSES OF TENSION GENERATOR AND WATER TREATMENT CHAMBER BY DINT OF PULSE BARRIER DISCHARGE." Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini 2021, no. 60 (2021): 21–27. http://dx.doi.org/10.15407/publishing2021.60.021.

Повний текст джерела

Анотація:

A technique for calculating the parameters of a magnetic switch as an element of a generator of short high-voltage pulses of tension to coordinate its compatible work with a water treatment chamber by dint of pulse barrier discharge is shown. The expediency and efficiency of using such a switch as an element that, by shunting, the discharge chamber, discharges the barrier to the arrival of the next voltage pulse has been confirmed. It is proved that with the accepted geometrical dimensions of the discharge chamber and the amplitude of the pulse voltage, provided that the magnetic switch is pre

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Kosenkov, V. "Influence of Vapor-Gas Cavity on Pressure Field in Closed Discharge Chamber with Rigid Walls." Elektronnaya Obrabotka Materialov 57, no. 3 (2021): 102–16. http://dx.doi.org/10.52577/eom.2021.57.3.102.

Повний текст джерела

Анотація:

The pressure field in discharge chambers of a limited volume with deformable walls very often has a great influence on the efficiency of technological processes of deformation of sheet alloys; therefore, its determination is an urgent task. As a result of an electric discharge in the liquid filling the discharge chamber, in it, a cavity with a higher compressibility is formed than the liquid in the chamber. At the stage of the discharge, this cavity is filled with non-ideal plasma, and after the discharge, with liquid vapor and gases dissolved in it (vapor-gas cavity). Its pulsations form a pr

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Bosyakov, M. N., and A. A. Kozlov. "Energy and gas dynamic characteristics of ionization nitrogen installations of industrial type." Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 63, no. 3 (2018): 342–50. http://dx.doi.org/10.29235/1561-8358-2018-63-3-342-350.

Повний текст джерела

Анотація:

The work provides the analysis of power characteristics of the industrial equipment – ionic nitriding applications – with different types of vacuum chambers – with hot and cold walls. The calculations results and experimental researches of thermal balance of the system “melt-wall chamber” at the process of plasma nitration for industrial applications are given. The work examines the influence of heat-shielding screens quantity in the applications with cold walls on the internal screen temperature and power of thermal losses at warming up parts melt and at its isothermal endurance. It has been

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Galli, G., H. Hamrita, C. Jammes, et al. "Characterization and localization of partial-discharge-induced pulses in fission chambers designed for sodium-cooled fast reactors." EPJ Web of Conferences 170 (2018): 03002. http://dx.doi.org/10.1051/epjconf/201817003002.

Повний текст джерела

Анотація:

During the operation of the Superphenix and Phenix reactors, an aberrant electrical signal was detected from the fission chambers used for neutron flux monitoring. This signal, thought to be due to partial electrical discharge (PD) is similar to the signal resulting from neutron interactions, and is generated in fission chambers at temperatures above 400 °C. This paper reports work on the characterization and localization of the source of this electrical signal in a High Temperature Fission Chamber (HTFC). The relation between the shape of the PD signal and various parameters (nature and press

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Discharge chamber"

1

Mahalingam, Sudhakar. "Particle Based Plasma Simulation for an Ion Engine Discharge Chamber." Wright State University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=wright1198181910.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Tran, Binh Phuoc. "Modeling of Ion Thruster Discharge Chamber Using 3D Particle-In-Cell Monte-Carlo-Collision Method." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/33510.

Повний текст джерела

Анотація:

This thesis is aimed toward developing a method to simulate ion thruster discharge chambers in a full three dimensional environment and to study the effect of discharge chamber size on ion thruster performance. The study focuses solely on ring-cusped thrusters that make use of Xenon for propellant and discharge cathode assembly for mean of propellant ionization. Commercial software is used in both the setup and analysis phases. Numerical simulation is handled by 3D Particle-In-Cell Monte-Carlo-Collision method. Simulation results are analyzed and compared with other works. It is concluded t

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Macquisten, M. A. "The pulsed electric discharge as an acoustic probe for combustion chamber diagnostics." Thesis, London South Bank University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373899.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Gruber, J. R. "A study of erosion due to low-energy sputtering in the discharge chamber of the Kaufman ion thruster." Thesis, University of Oxford, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.249396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Tomashevskyi, Roman, Viacheslav Kulichenko, and Nikolay Mahonin. "System for Flow Rate Regulation with Pulse-Width Modulation." Thesis, Kyiv polytechnic institute, 2014. http://repository.kpi.kharkov.ua/handle/KhPI-Press/7880.

Повний текст джерела

Анотація:

In article describes the concept of the flow control system for ozone-oxygen mixture, using the principles of pulse-width modulation. The basic equation for calculation of the system measurement channel are given. Experimental studies of such air channel system and its performance characteristics are describes. The possibility of using flow control system ozone-oxygen mixture in medical ozone is shown.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Deisting, Alexander [Verfasser], and Silvia [Akademischer Betreuer] Masciocchi. "Measurements of ion mobility and GEM discharge studies for the upgrade of the ALICE time projection chamber / Alexander Deisting ; Betreuer: Silvia Masciocchi." Heidelberg : Universitätsbibliothek Heidelberg, 2018. http://d-nb.info/1177384647/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Penkal, Bryan James. "Steps in the Development of a Full Particle-in-Cell, Monte Carlo Simulation of the Plasma in the Discharge Chamber of an Ion Engine." Wright State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=wright1367586856.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Махонін, Микола Віталійович. "Метод визначення параметрів генератору медичного озону для ефективного підвищення його продуктивності". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/42015.

Повний текст джерела

Анотація:

Дисертація на здобуття наукового ступеня кандидата технічних наук (доктора філософії) за спеціальністю 05.11.17 «Біологічні та медичні прилади і системи». – Національний технічний університет «Харківський політехнічний інститут», Харків, 2019. Дисертація Махоніна М.В. присвячена вирішенню однієї з актуальних науково-технічних задач сучасного медичного приладобудування – підвищенню ефективності генератору медичного озону за рахунок визначення параметрів розрядної камери, напруги живлення та витрати кисню. На даний час у світі активно використовують озон та його суміші для широких потреб різних

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Galli, Giacomo. "Etude des décharges partielles dans une chambre à fission haute température." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLC109/document.

Повний текст джерела

Анотація:

Le Commissariat à l'Energie Atomique et aux Energies Alternatives (CEA) a en charge la conception d'un réacteur à neutrons rapides de quatrième génération.L'instrumentation neutronique de ce futur réacteur s'appuiera sur des chambres à fission placées en cuve. Ces chambres à fission à haute température (CFHT) devront fonctionner à pleine puissance à une température comprise entre 400°C et 650°C.Un bilan récent de la technologie CFHT a révélé que certains points sont à améliorer afin d'en garantir une plus grande fiabilité.En particulier, on recherche une meilleure compréhension du phénomène de

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Махонін, Микола Віталійович. "Метод визначення параметрів генератору медичного озону для ефективного підвищення його продуктивності". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/42014.

Повний текст джерела

Анотація:

Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.11.17 – біологічні та медичні прилади і системи. Національний технічний університет «Харківський політехнічний інститут», Харків, 2019 р. Дисертацію присвячено розробці методу визначення параметрів генератору медичного озону для ефективного підвищення його продуктивності за рахунок визначення параметрів його частин з урахуванням впливу факторів різної природи. На основі дослідження питання побудови генераторів медичного озону була доведена актуальність дослідження шляхів підвищення його ефективності. Наведені

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Discharge chamber"

1

Foster, John E. Plasma emission characteristics from a high current hollow cathode in an ion thruster discharge chamber. National Aeronautics and Space Administration, Glenn Research Center, 2002.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

K, Ray Pradosh, and United States. National Aeronautics and Space Administration., eds. Modeling of life limiting phenomena in the discharge chamber of an electron bombardment ion thruster: Final report. Mechanical Engineering Dept., Tuskegee University, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

United States. National Aeronautics and Space Administration., ed. Characterization of hollow cathode, ring cusp discharge chambers. Dept. of Mechanical Engineering, Colorado State University, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Enhanced thermal emittance of space radiators by ion-discharge chamber texturing. National Aeronautics and Space Administration, 1987.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

National Aeronautics and Space Administration (NASA) Staff. Computational Model Tracking Primary Electrons, Secondary Electrons, and Ions in the Discharge Chamber of an Ion Engine. Independently Published, 2018.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Discharge chamber"

1

Mamutov, Viacheslav S., Xenia S. Arsentyeva, and Ivan V. Kalatozishvili. "Pressure on Thin Sheet Blank in Discharge Chamber During Electrohydropulsed Stamping." In Advances in Mechanical Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-30027-1_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Wu, Jianjun, Jian Li, Yuanzheng Zhao, and Yu Zhang. "Numerical Simulation of the Nanosecond Laser Ablation of Al Propellant." In Numerical Simulation of Pulsed Plasma Thruster. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-7958-1_4.

Повний текст джерела

Анотація:

AbstractPulsed plasma thrusters (PPTs) using gaseous propellants (Ziemer and Choueiri in Is the gas-fed PPT an electromagnetic accelerator an investigation using measured performance. AIAA 99–2289, 1999; Ziemer et al. in Performance characterization of a high efficiency gas-fed pulsed plasma thruster. AIAA-97–2925, 1997; Ziemer in Performance scaling of gas-fed pulsed plasma thrusters. Princeton University, 2001; Ziemer and Petr in Performance of gas fed pulsed plasma thrusters using water vapour propellant. AIAA 2002–4273, 2002) typically far outperform those using solid propellants in terms

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Bocharnikov, V. M., S. V. Golovastov, and V. V. Golub. "Influence of Methane on Ignition Delays of Hydrogen at Impulse Discharge from High Pressure Chamber." In 29th International Symposium on Shock Waves 1. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16835-7_46.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Savary, C., B. Bertin, M. Lenaerts, I. El Ouamari, and D. Bousmar. "Transverse Mooring Forces Due to Asymmetrical Filling in a Lock with Longitudinal Culverts and Side Ports." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_63.

Повний текст джерела

Анотація:

AbstractIn lock design, several geometries are proposed for the levelling system with the aim of insuring a smooth and fast levelling operation. For high and medium lift lock, longitudinal culverts with side ports located in the lock walls are often chosen because this system distribute the flow along the entire length of the lock chamber. Nevertheless, when one of the culvert (valve) is out of order, the flow is asymmetrical what induced significant transverse mooring forces, especially during filling operations.Field measurement on such a lock (225 m long, 25 m wide and 13.5 m lift) demonstr

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Liu, Wei, Haibo Wang, Weizong Wang, et al. "PIC/MCC simulation of axial ring-cusp hybrid discharge in the micro ion thruster ionisation chamber." In Aerospace and Associated Technology. Routledge, 2022. http://dx.doi.org/10.1201/9781003324539-89.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

O’Mahoney, Tom, Martin De Jonge, René Boeters, and Tjerk Vreeken. "Innovative Salt-Freshwater Separation System at the Krammer Locks, The Netherlands. Hydraulic Modelling to Balance Functional Requirements." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_42.

Повний текст джерела

Анотація:

AbstractThis paper presents research on the impact of a plan to change the salt-fresh water separation system at the Krammer locks in the Netherlands. This lock complex forms the connection for inland navigation between the Eastern Scheldt estuary and the hinterland. The new salt-fresh system will include bubble screens at both lockheads and an additional flushing discharge through the lock chambers and a neighbouring flushing sluice. The interaction between water management, salt management, ecology requirements and navigational requirements has been accounted for with the aid of WANDA-Locks

Стилі APA, Harvard, Vancouver, ISO та ін.

7

"function chamber without discharge." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_63396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

CHARPAK, G., and L. MASSONET. "Some Developments of the Discharge Chamber." In World Scientific Series in 20th Century Physics. WORLD SCIENTIFIC, 1995. http://dx.doi.org/10.1142/9789812795878_0010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Huang, Kun, Xinyang Li, Xinlei Zhu, Qingyang Meng, and Xu Zeng. "Pulsed Shockwave: Effect of Different Discharge Energy and Repeat Number on Rock Mechanical Properties." In Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230290.

Повний текст джерела

Анотація:

Pulsed shockwave can be used as a technique for oil and gas production stimulation by changing the mechanical properties of rock. Based on the hydro-electric effect, the discharge equipment creates a pressure shockwave. The mechanical energy carried by the shockwave can cause damage to the rock. In this paper, the effect of discharge energy and repeat number on the rock’s mechanical properties was studied. A set of discharge pulse devices which consists of a charging and discharging system, a discharge chamber, and a test system were built. Experiments were performed with discharge energy betw

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Boutana, Ilhem. "Advanced Numerical Modeling of Electrohydraulic Sheet Metal Formability." In Advances in Transdisciplinary Engineering. IOS Press, 2024. https://doi.org/10.3233/atde241261.

Повний текст джерела

Анотація:

Electrohydraulic Forming (EHF) is a cutting-edge manufacturing technique that leverages high-voltage capacitor discharges within a water-filled chamber to generate pulsed pressure waves for the rapid shaping of sheet metal. This versatile process accommodates both free-form shaping and die-based forming, making it ideal for a wide range of metal-forming applications. In this paper, we introduce an innovative numerical model, developed using COMSOL Multiphysics, to simulate sheet metal deformation through the EHF method, with a focus on the localized pressure generated by electrical discharge.

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Discharge chamber"

1

Guo, S., X. Jin, T. Huang, and L. Li. "Numerical Investigation of Ion Loss Characteristics in the Discharge Chamber of an Ion Thruster." In 2024 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2024. http://dx.doi.org/10.1109/icops58192.2024.10627324.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Jun, Do Han, Woo Young Sim, Sang-Sik Yang, and James Jungho Pak. "A Constant Delivery Micropump Using Surface Tension and Thermopneumatic Pressure." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-14390.

Повний текст джерела

Анотація:

This paper presents the fabrication and test of a constant delivery thermopneumatic micropump made of PDMS without any moving part. The driving force of the liquid discharge is the pneumatic pressure of heated air and the suction of liquid is accomplished by the surface tension. The proposed micropump consists of an inlet, an outlet, a pump chamber, two air chambers, two air discharge channels and two air suction channels. The air chambers have electric heaters on the Pyrex glass substrate. Each air chamber is connected the pump chamber through two different air channels which behaves like che

Стилі APA, Harvard, Vancouver, ISO та ін.

3

HIATT, J., and P. WILBUR. "Ring cusp discharge chamber performance optimization." In International Electric Propulsion Conference. American Institute of Aeronautics and Astronautics, 1985. http://dx.doi.org/10.2514/6.1985-2007.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Mohamed, M. M., and Z. F. Ghatass. "Modified Helium microwave—induced plasma discharge chamber." In SPECTRAL LINE SHAPES. ASCE, 1999. http://dx.doi.org/10.1063/1.58310.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Znamenskaya, Irina Aleksandrovna, E. A. Karnozova, and T. A. Kuli-Zade. "Thermographic Visualization of the Thermal Fields from Plasma Actuators Through Discharge Chamber Windows." In 32nd International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2022. http://dx.doi.org/10.20948/graphicon-2022-248-255.

Повний текст джерела

Анотація:

The paper presents the panoramic visualization of thermal fields in the discharge section of the UTRO-3 experimental device of the Lomonosov Moscow State University Faculty of Physics. The main purpose of the work was to study the heating and cooling processes in a rectangular channel region under the influence of pulsed surface high-current discharges sliding over the dielectric surface, taking into account the supersonic flow in a channel with an obstacle structures. A pulsed surface discharge initiated in a 24x48 mm channel in a high-speed flow (the delay time after the shock wave passage i

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Facta, Mochammad, Hermawan, Karnoto, Zainal Salam, and Zolkafle Buntat. "Double dielectric barrier discharge chamber for ozone generation." In 2014 1st International Conference on Information Technology, Computer and Electrical Engineering (ICITACEE). IEEE, 2014. http://dx.doi.org/10.1109/icitacee.2014.7065781.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

de Groh, Kim, Bruce Banks, and Christina Karniotis. "NSTAR Extended Life Test Discharge Chamber Flake Analyses." In 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-3612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Stueber, Thomas. "Ion Thruster Discharge Chamber Simulation in Three Dimension." In 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-3688.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Goebel, Dan, J. Polk, and A. Sengupta. "Discharge Chamber Performance of the NEXIS Ion Thruster." In 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-3813.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Wirz, Richard, and Ira Katz. "2-D Discharge Chamber Model for Ion Thrusters." In 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-4107.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Discharge chamber"

1

Hernandez-Abrams, Darixa, Bruce Pruitt, Samantha Wiest, and S. McKay. Stormwater management practices, monitoring, and maintenance plan for US Army Garrison at West Point, NY. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/46933.

Повний текст джерела

Анотація:

Structural stormwater management practices (SMPs) are designed and installed with the goal of reducing runoff and improving water quality through a variety of built (e.g., underground chamber and filter systems), nature-based and natural features (e.g., rain gardens, swales). In compliance with Section 402 of the US Clean Water Act (CWA), US Army Garrisons at West Point MS4 operators are required to obtain a National Pollutant Discharge Elimination System permit or a New York State Pollutant Discharge Elimination System (SPDES). These permits require development of stormwater management plans

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Sartain, Bradley, Erika Haug, Kurt Getsinger, Benjamin Sperry, Mark Heilman, and Mike Greer. Small plot applications of florpyrauxifen–benzyl (Procellacor SC™) for control of monoecious hydrilla in Roanoke Rapids Lake, NC. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/47115.

Повний текст джерела

Анотація:

Four demonstration plots were selected at Roanoke Rapids Lake, NC to evaluate water exchange and aqueous herbicide residues in stands of submersed aquatic vegetation (SAV) following treatment with rhodamine wt dye and florpyrauxifen-benzyl to control monecious hydrilla. Florpyrauxifen-benzyl (Procellacor™ SC) was applied in combination with Rhodamine WT (RWT) at two of the plots. Dye measurements and herbicide residue samples were collected at specific time intervals to draw comparisons between herbicide and RWT dye dissipation. The two additional plots served as reference plots to the treatme

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!