Готові списки джерел за темами / Discharge circuit parameters

Зміст

Статті в журналах
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "Discharge circuit parameters"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Discharge circuit parameters".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Discharge circuit parameters"

Gizatullin, Farit A., Zulfiya G. Gabidullina, and Andrey V. Lobanov. "RESONANCE PHENOMENA IN AIRCRAFT ENGINE IGNITION SYSTEMS." ELECTRICAL AND DATA PROCESSING FACILITIES AND SYSTEMS 19, no. 2 (2023): 7–15. http://dx.doi.org/10.17122/1999-5458-2023-19-2-7-15.

Повний текст джерела

Анотація:

The relevance An analysis of scientific and technical literature in the field of development and research of aircraft engine ignition systems shows that the manifestations of resonant processes in nonlinear discharge circuits of capacitive ignition systems in the presence of two energy storage devices - a storage capacitor and an inductor coil have not been studied with the issuance of recommendations for matching the parameters of energy storage devices. This problem is of significant practical interest from the point of view of optimizing the parameters of the discharge circuits, increasing

Стилі APA, Harvard, Vancouver, ISO та ін.

Tseng, Kuo-Hsiung, Yur-Shan Lin, Yun-Chung Lin, Der-Chi Tien, and Leszek Stobinski. "Deriving Optimized PID Parameters of Nano-Ag Colloid Prepared by Electrical Spark Discharge Method." Nanomaterials 10, no. 6 (2020): 1091. http://dx.doi.org/10.3390/nano10061091.

Повний текст джерела

Анотація:

Using the electrical spark discharge method, this study prepared a nano-Ag colloid using self-developed, microelectrical discharge machining equipment. Requiring no additional surfactant, the approach in question can be used at the ambient temperature and pressure. Moreover, this novel physical method of preparation produced no chemical pollution. This study conducted an in-depth investigation to establish the following electrical discharge conditions: gap electrical discharge, short circuits, and open circuits. Short circuits affect system lifespan and cause electrode consumption, resulting i

Стилі APA, Harvard, Vancouver, ISO та ін.

Skiba, Andrzej J. "Simulation of Atmospheric Discharge at Power Line." AUTOMATYKA, ELEKTRYKA, ZAKLOCENIA 11 (September 30, 2020): 8–14. http://dx.doi.org/10.17274/aez.2020.41.01.

Повний текст джерела

Анотація:

Modelling electrical circuits by application of schemes containing elements with distributed parameters such as transmission lines has been applied in this research. Functions approximating voltage or current atmospheric discharges have been presented together with frequency spectra of these functions. The results of computer simulations obtained with the help of PSpice software have been presented for a simplified three-phase circuit subject to such discharge.

Стилі APA, Harvard, Vancouver, ISO та ін.

Roziskulov, S. S., D. V. Vinnichenko, and N. I. Suprunovska. "INTERDEPENDENT TRANSIENT PROCESSES IN CIRCLES OF BIPOLAR DISCHARGE PULSE CURRENT GENERATOR WITH R-L-C LOAD AND LIMITED POSITIVE VOLTAGE FEEDBACK." Tekhnichna Elektrodynamika 2025, no. 3 (2025): 3–10. https://doi.org/10.15407/techned2025.03.003.

Повний текст джерела

Анотація:

The paper analyzes the interdependent transient processes in the discharge circuits of a bipolar discharge pulse gen-erator (DPG) with R-L-C load and limited positive voltage feedback. The analytical dependence of the value of the ini-tial voltage on the capacitor connected in series with the load on the value of the Q factor of the discharge circuit of the DPG was obtained. The optimal electrical parameters of these circuits have been determined to ensure high dynamic and energy indicators of impulse currents in an electric spark load. It is substantiated that the serial connection of a capac

Стилі APA, Harvard, Vancouver, ISO та ін.

BERSHADSKIY, Il'ya A., Aleksandr Yu GLADKOV, and Vladimir V. IVANILOV. "Analysis of Electrical Explosion Safety Based on Dynamic Electrical Circuit Switching Discharge Models." Elektrichestvo, no. 2 (2022): 19–28. http://dx.doi.org/10.24160/0013-5380-2022-2-19-28.

Повний текст джерела

Анотація:

A mathematical model describing a switching arc discharge in an RL electric circuit based on the Mayr equation is developed and tested. The body of mathematics representing an arc discharge appearing in an RL circuit that takes into account the dynamic current-voltage arc characteristic and arc thermal processes is described. The results from calculating the arc thermal inertia constant for the switching period for a resistive circuit by several known methods, including the values obtained during simulation, are given. It has been found that the arc discharge model that takes into account the

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhao, Zhi Gang, Fu Gui Liu, You Hua Wang, et al. "Research on Parameter Simulation of Pulse Discharge Current in Permanent Magnet Motor Magnetization." Advanced Materials Research 304 (July 2011): 36–40. http://dx.doi.org/10.4028/www.scientific.net/amr.304.36.

Повний текст джерела

Анотація:

In order to improve the magnetization effect of permanent magnet motor, it is requires accurate and efficient magnetization circuit except that we choose the permanent magnet with high coercive force. The method of pulse discharging for permanent magnet motor magnetization is simple, fast speed and the magnetization effect is good. The parameter selection of pulse circuits influences the magnetization effect directly. The pulse circuit parameters were simulated through parameter scanning method, using Pspice simulation software. Appropriate circuit parameters were obtained through comparing th

Стилі APA, Harvard, Vancouver, ISO та ін.

Huang, Shih-Sen, Hsing-Che Tsai, Jerry Chang, Po-Chun Huang, Yun-Chien Cheng, and Jong-Shinn Wu. "Establishing an equivalent circuit for a quasihomogeneous discharge atmospheric-pressure plasma jet with a breakdown-voltage-controlled breaker and power supply circuit." Journal of Physics D: Applied Physics 55, no. 21 (2022): 215204. http://dx.doi.org/10.1088/1361-6463/ac4b57.

Повний текст джерела

Анотація:

Abstract To more accurately simulate the I–V diagram of a homogeneous and a filamentary plasma discharge with an equivalent circuit model, this study employed a breaker and passive circuit components and calculated the discharge parameters, such as equivalent discharge resistances and potential distribution, in an atmospheric pressure plasma jet (APPJ). In addition, we calculated the gas-gap and dielectric capacitances of the APPJ and added a power supply equivalent circuit. Compared with other circuit models that use switches or a time-controlled current source to simulate the discharges, our

Стилі APA, Harvard, Vancouver, ISO та ін.

Shydlovska, N. A., S. M. Zakharchenko, and O. P. Cherkaskyi. "FEATURES OF TRANSIENTS IN SECOND-ORDER CIRCUITS WITH A NONLINEAR MODEL OF SPARK-EROSION LOAD UNDER CONDITIONS OF FORCED LIMITATION OF THEIR DURATION." Tekhnichna Elektrodynamika 2022, no. 6 (2022): 3–12. http://dx.doi.org/10.15407/techned2022.06.003.

Повний текст джерела

Анотація:

In the Mathlab Simulink software environment a model of a second-order discharge-pulse system with a nonlinear de-scription of the equivalent electrical resistance of a spark-erosion load was created. Under conditions of forced limita-tion of the duration of discharge pulses for a series of values of the inductance and capacitance of the discharge circuit, as well as the initial conditions in them, transients in the system are calculated. In groups of modes with fixed values of the initial voltage on the working capacitor and in groups of modes with fixed values of voltage amplitude of the fre

Стилі APA, Harvard, Vancouver, ISO та ін.

Zucca, Mauro, Melika Hassanzadeh, Davide Signorino, and Umberto Pogliano. "Uncertainty Evaluation of a Supercapacitor Equivalent Circuit Parameters." IEEE Transactions on Instrumentation and Measurement 74 (February 21, 2025): 1502509. https://doi.org/10.1109/TIM.2025.3544362.

Повний текст джерела

Анотація:

The accurate simulation of the behavior of a supercapacitor (SC) and its control in an electronic system cannot be achieved by a simple one-branch circuit. A correct simulation requires the use of more complex equivalent circuits, with at least two or three branches. These equivalent circuits guarantee a good reproduction of the device’s behavior. The effectiveness of an equivalent circuit is linked to the limits of the circuit parameter identification, which is commonly achieved by means of the voltage and current measurement of charge and self-discharge cycles. The uncertainty in the i

Стилі APA, Harvard, Vancouver, ISO та ін.

Popović, I., and M. Zlatanović. "Equivalent Circuits of Unipolar Pulsed Plasma System for Electrical and Optical Signal Analysis." Materials Science Forum 555 (September 2007): 89–94. http://dx.doi.org/10.4028/www.scientific.net/msf.555.89.

Повний текст джерела

Анотація:

Matching of pulse plasma generators to various gas discharges for surface treatment of materials depends on plasma processing equipment. In order to investigate the influence of pulse plasma generator and gas discharge parameters on electrical signal waveforms during the process of unipolar pulse plasma nitriding, equivalent electrical circuit was introduced. The influence of parasitic inductance of interconnection lines and vacuum chamber physical properties was also included in the given equivalent circuit. Gas discharge characteristics at different process parameters were investigated. It w

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Discharge circuit parameters"

Wu, Jianjun, Jian Li, Yuanzheng Zhao, and Yu Zhang. "Numerical Simulation of the PPT Discharge Process Based on Electromechanical Models." In Numerical Simulation of Pulsed Plasma Thruster. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-7958-1_5.

Повний текст джерела

Анотація:

AbstractZero-dimensional (0D) and one-dimensional (1D) models have low computational complexity and short computation time. In addition, these models can predict the macroscopic performance parameters of a pulsed plasma thruster (PPT), such as the specific impulse, impulse bit, and thrust efficiency. However, these models depend highly on experimental data and empirical parameters. Therefore, it is essential to establish a numerical model that can quickly and accurately predict the performance parameters of a PPT without relying on experimental results. In an electromechanical model, a PPT is

Стилі APA, Harvard, Vancouver, ISO та ін.

Yuan, Wei, Ruoyu Han, Weisheng He, Chen Li, Yuchen Cao, and Yongmin Zhang. "Influence of Circuit Parameters on Discharge Characteristics and Shock-Wave in Underwater Electric Wire Explosion." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1532-1_112.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhyltsov, Andrii, Igor Kondratenko, and Vyacheslav Vasyuk. "Linear Electromechanical Transducer in the Systems of Welded Joints of Electrodynamic Processing." In Advances in Environmental Engineering and Green Technologies. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9420-8.ch016.

Повний текст джерела

Анотація:

This chapter is dedicated to establishing characteristics relationships between the induction type impact electromechanical transducer and parameters and quality indicators of electrodynamic effects on the welded joints. The authors developed two-dimensional circle-field mathematical model of transient discharge capacity at the branched electrical circuit with the coil inductance which changes dynamically, allowing by adjusting the parameters of the electromechanical transducer to achieve the necessary technological requirements for the characteristics of electrodynamic processing. Based on ma

Стилі APA, Harvard, Vancouver, ISO та ін.

Alves José, Sousa Filipe, and Correia Miguel V. "Calibration and Electrical Validation of a BIS Portable System." In Studies in Health Technology and Informatics. IOS Press, 2018. https://doi.org/10.3233/978-1-61499-868-6-122.

Повний текст джерела

Анотація:

Heart failure (HF) affects at least 26 million people worldwide and is considered a global pandemic. Almost 1 out of 4 hospitalised patients are re-hospitalised for HF within the 30-day post-discharge period. This can be avoided if changes to the hemodynamics of the HF patient's body are early detected. Bioimpedance Spectroscopy (BIS) is a method that allows the measurement and analysis of multi-frequency body complex impedance and can be used to detect changes to the HF patient's hemodynamics. This paper presents the calibration and validation process of a low-cost portable BIS system, as wel

Стилі APA, Harvard, Vancouver, ISO та ін.

Jin, Biao, Qiang Fei, Shunying Wang, Yanning Wang, and Wuyuan Zou. "Experimental Study on Pulse Discharge Characteristics of Square Power Lithium-Ion Battery." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220520.

Повний текст джерела

Анотація:

Lithium-ion battery has been widely used in electric vehicles due to various excellent properties, however, temperature affects its working performance. In the design of electric vehicles, to ensure that the battery works in a reasonable voltage and temperature range, the analysis of its pulse characteristics and accurate thermal-production model are the basis for the control strategy of the whole vehicle. Meanwhile, the study of lithium battery pulse discharge characteristics can provide data support for the heat source calculation required for its temperature field simulation. Therefore, it

Стилі APA, Harvard, Vancouver, ISO та ін.

Gürkan Ahmet Yusuf, Köksal Çağatay Sabri, Aydin Çağrı, and Ünal Uğur Oral. "Viscous Flow Computations for the Diffuser Section of a Large Water Tunnel." In Technology and Science for the Ships of the Future. IOS Press, 2018. https://doi.org/10.3233/978-1-61499-870-9-275.

Повний текст джерела

Анотація:

A new research project, involving the construction of a modern, large, closed-circuit depressurised high-speed water tunnel to support the detailed hydroacoustic, hydrodynamic, cavitation and flow visualization based experimental campaigns, is to be completed this year in Istanbul Technical University. An extensive computational study was conducted to design mainly the most critical sections of the tunnel. The results of the simulations concerning the hydrodynamic properties of the contraction and test sections of the tunnel were previously presented in NAV2015 conference. The present paper co

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen Sujuan, Zhao Zhendong, and Gu Xinyan. "The Research on Charge and Discharge Characteristics with Single Li-NiCoMn Lithium-Ion Battery." In Frontiers in Artificial Intelligence and Applications. IOS Press, 2019. https://doi.org/10.3233/978-1-61499-939-3-159.

Повний текст джерела

Анотація:

The open-circuit voltage (OCV) of batteries is a crucial characteristic parameter which reflects many aspects of a battery's performance, such as capacity, state of charge (SOC) and state of health (SOH). In order to improve and better the applicability of Li-NiCoMn lithium-ion batteries in electric vehicles, a series of charge and discharge experiments were carried out in constant current mode. The battery capability of Li-NiCoMn lithium-ion batteries had been obtained from the experiment results with multiple different type models. Based on the analysis on the charge and discharge curves, th

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Discharge circuit parameters"

Ohnaka, N., and Y. Furutani. "Electrochemical Investigation of Hydrogen Absorption Mechanism in Type 304 Stainless Steel under Simulated Crevice-Like Water Chemistry Conditions." In CORROSION 1987. NACE International, 1987. https://doi.org/10.5006/c1987-87261.

Повний текст джерела

Анотація:

Abstract An investigation of the permeation rate of electrolytic hydrogen through a Type 304 stainless steel membrane using an electrochemical technique is described. The variation of the permeation rate with cathodic overpotential has been determined under simulated crevice- like water chemistry condition, or in acidic (0.005 M H2SO4 + 0.05 M Na2SO4), neutral (0.05 M Na2SO4) and alkaline (0.01 N NaOH + 0.05 M Na2SO4) solutions with deaeration. The electrochemical relationships between electrochemical parameters like cathodic overpotential, cathodic current and permeation current, indicate tha

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Yan, Islam Md Rashedul, Lei Ji, and Baoyang Jiang. "Investigation of Circuit Parameters in Tube Electrode High-Speed Electrochemical Discharge Machining." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8417.

Повний текст джерела

Анотація:

Abstract Tube electrode high-speed electrochemical discharge machining (TSECDM) has been effectively used in the manufactures of micro holes with difficult-to-cut conductive materials in the field of aerospace industry. The design and parameters of circuit are critical for the machining performances of TSECDM. In this paper, the influences of circuit on the TSECDM performances are studied. Firstly, a relaxation type RLC generator is designed and analyzed by MATLAB simulation. Secondly, the effects of RLC circuit parameters such a resistor (R), capacitor (C) and inductor (L) on machining perfor

Стилі APA, Harvard, Vancouver, ISO та ін.

Jiang, Wenlong, Liang Dong, Xin Zhao, and Xiaokun Xie. "Influence of Discharge Circuit Parameters on the Efficiency of Reconnection Electromagnetic Launcher." In 2023 IEEE 4th China International Youth Conference On Electrical Engineering (CIYCEE). IEEE, 2023. http://dx.doi.org/10.1109/ciycee59789.2023.10401825.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kim, Vladimir, Andrei Sorokin, John Brophy, Charles Garner, Michael Day, and Thomas Randolph. "Simulation of the discharge channel wall contamination influence on SPT-100 parameters and level of oscillations in discharge circuit." In 31st Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-2669.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jitea, Ilie-Ciprian, Bogdan Garaliu Busoi, Robert Laszlo, Gheorghiosu Edward, and Samet Soysal. "PRESENTATION OF THE SAFETY AND PERFORMANCE PARAMETERS OF ELECTRONIC DETONATORS AND THE IGNITION SYSTEM." In 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022/1.1/s03.038.

Повний текст джерела

Анотація:

DETEX Electronic Detonator made by Kirlioglu consists of an electronic circuit with communication and microprocessor and wire bridge resistance coated with explosive material. DETEX Electronic Detonator, which identity information, delay information, charge, discharge and all functions are controlled digitally, is a system consisting of all electronic circuit elements. The system consists of a communication circuit, a master control circuit with a microprocessor, a controlled charge, a discharge and an ignition circuit. With two cables, the circuit takes both the feed and the communication via

Стилі APA, Harvard, Vancouver, ISO та ін.

Pandey, Akash B., Prakash K. Brahmankar, and Harsh S. Purohit. "Experimental Determination of Parameters to Avoid Arcing in Electrical Discharge Machining of Titanium Diboride Particulate Reinforced Ferrous Matrix Composite." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39886.

Повний текст джерела

Анотація:

Titanium diboride (TiB2) particles are most popular reinforcement along with tungsten carbide for ferrous matrices for developing composites with high specific modulus, improved wear resistance and hardness while providing good fatigue properties as well. The hardness of such composites poses a problem in conventional machining in terms of very fast wear rates of tools and very high cutting forces. Non-conventional processes like electrical discharge machining (EDM) are very popular for machining of conductive composites like TiB2 reinforced ferrous matrix composites. However, there are a larg

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Ge, Renzhou, and Chendong Duan. "Design of a Passive Balancing Battery Acquisition Device." In SAE 2024 Vehicle Powertrain Diversification Technology Forum. SAE International, 2025. https://doi.org/10.4271/2025-01-7014.

Повний текст джерела

Анотація:

<div class="section abstract"><div class="htmlview paragraph">A power battery parameter acquisition device was designed and developed with STM32 as the core, featuring the functions of a battery management system (BMS) to ensure the safety and stability of the battery pack during operation. The device includes functions such as battery charge and discharge management, battery safety protection, and battery status monitoring, enabling real-time monitoring of cell parameters. The hardware design covers the power circuit, charge and discharge cycle circuit, battery acquisition circuit

Стилі APA, Harvard, Vancouver, ISO та ін.

De Vivo, B., L. Egiziano, P. Lamberti, and V. Tucci. "Influence of circuit parameters on the electric discharge machining of the bearings of a PWM inverter driven motor." In 2008 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). IEEE, 2008. http://dx.doi.org/10.1109/speedham.2008.4581143.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Qin, Liu, Ding Zejun, Mo Xizhe, et al. "Research on Extraction of Discharge Behavior Parameters of Valve-regulated Lead-acid Battery Based on Dynamic Equivalent Circuit Model." In 2022 Asia Power and Electrical Technology Conference (APET). IEEE, 2022. http://dx.doi.org/10.1109/apet56294.2022.10072800.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!