Готові списки джерел за темами / Discrete coatings

Зміст

Статті в журналах
Дисертації
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Discrete coatings"

Автор: Grafiati

Опубліковано: 30 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Discrete coatings".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Discrete coatings"

Antonyuk, V., and L. Lopata. "Optimization of discrete structure of electrospark coatings." Problems of Tribology 30, no. 2/116 (2025): 77–83. https://doi.org/10.31891/2079-1372-2025-116-2-77-83.

Повний текст джерела

Анотація:

The presented article considers the disadvantages of chromium coatings and shows the possibility of their elimination by obtaining coatings of discrete structure. The principle of coatings of discrete structure allows to organically combine physical processes underlying pulse hardening methods with a discrete structure determining their service properties. It is shown and substantiated that the method of electric spark alloying is the most suitable for applying discrete coatings, since this process is discrete by its nature. The advantage of discrete coatings is the absence of a softening effe

Стилі APA, Harvard, Vancouver, ISO та ін.

Tokaruk, V., O. Mikosianchyk, R. Mnatsakanov, and N. Rohozhyna. "Microgeometrical characteristics of electrospark coatings in the initial state." Problems of tribology 98, no. 4 (2020): 33–39. http://dx.doi.org/10.31891/2079-1372-2020-98-4-33-39.

Повний текст джерела

Анотація:

Microgeometric parameters of the effect of discrete electrospark coatings on their stress-strain state have been evaluated for the case of using a combined technology of modification of duralumin D16, which includes the technique of electrospark alloying with subsequent surface plastic deformation of coatings formed. According to the profilograms of discrete electrical coatings, the curves of the bearing surface (Abbott curves) were constructed and the parameters that drastically affect tribological characteristics of the coatings were determined. It was shown that modification of duralumin D1

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Xuejuan, Zhiguo Zhou, Ming Chen, Zheng Liu, Shuhui Jiang, and Lei Wang. "Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives." Coatings 14, no. 4 (2024): 463. http://dx.doi.org/10.3390/coatings14040463.

Повний текст джерела

Анотація:

Due to the low adhesion observed at the interface between solid and liquid, superhydrophobic coatings hold significant promise for various applications, such as self-cleaning, anti-corrosion, anti-icing, and drag reduction. However, a notable challenge hindering their widespread adoption in these domains lies in their delicate durability. In this study, we propose a straightforward method for preparation. The fluorosilicone resin is initially discretized through a gradual introduction of nonsolvent into its solution, followed by thorough mixing and stirring with silica nanoparticles. The resul

Стилі APA, Harvard, Vancouver, ISO та ін.

Loganina, Valentina I., and Bassam Shareef Deneef Al Saedi. "Fastness of Protective and Decorative Coatings Construction Products and Structures to the Action of Wind." Defect and Diffusion Forum 410 (August 17, 2021): 773–77. http://dx.doi.org/10.4028/www.scientific.net/ddf.410.773.

Повний текст джерела

Анотація:

The article provides information about the stress state protective and decorative coatings during aging. The influence of the discrete nature of the substrate on the change in the stress state of the coatings from the action of the wind load is considered. It was revealed that for each type of coating there is its own critical value of the pore size (unfilled paint), the excess of which leads to cracking of the coatings. A method is proposed for selecting the optimal coating thickness.

Стилі APA, Harvard, Vancouver, ISO та ін.

Lu, Yun, Liang Hao, Hiromasa Sato, Su Jun Guan, Hiroyuki Yoshida, and Hiroshi Asanuma. "Formation Process of Ti Coatings in Mechanical Coating with Different Rotation Speed." Materials Science Forum 833 (November 2015): 161–64. http://dx.doi.org/10.4028/www.scientific.net/msf.833.161.

Повний текст джерела

Анотація:

Ti coatings on alumina (Al2O3) balls had been prepared by mechanical coating technique (MCT), and the influence of the rotation speed on the coating formation process were investigated. The crystal structure and microstructure of the Ti coatings were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The formation process of Ti coatings was examined and discussed. The results showed that the rotation speed had great influence on the coating formation process. With increasing the rotation speed, the speed of coating formation had been accelerated and the surface bec

Стилі APA, Harvard, Vancouver, ISO та ін.

Solovykh, E. K., I. V. Shepelenko, M. I. Chernovol, S. O. Mahopets, A. E. Solovuch, and S. E. Katerynych. "Optimization of the technology for applying discrete coatings in restoration of bronze parts by electrospark alloying." Problems of Tribology 28, no. 1/107 (2023): 51–58. http://dx.doi.org/10.31891/2079-1372-2023-107-1-51-58.

Повний текст джерела

Анотація:

In this work, a multicriteria optimization of the technology for applying discrete coatings by electrospark alloying in the restoration of bronze parts is carried out. As criteria for optimizing the process of electrospark alloying, tribotechnical characteristics were chosen – the wear intensity and friction coefficient of the coating. As adjustable parameters, those design, technological and operational factors that have the greatest influence on the value of optimization criteria are used: coating material; lubricant; operating current; amplitude of electrode oscillations; sliding speed; spe

Стилі APA, Harvard, Vancouver, ISO та ін.

Feng, Ai Xin, Yu Peng Cao, Chuan Chao Xu, et al. "Experimental Study on Testing Ni-Containing Stainless Steel Protective Coatings by Pulsed Laser Scratching." Applied Mechanics and Materials 43 (December 2010): 651–56. http://dx.doi.org/10.4028/www.scientific.net/amm.43.651.

Повний текст джерела

Анотація:

In the experiment, we use pulsed laser to conduct discrete scratching on Ni-containing stainless steel protective coatings to test residual stress situation after the matrix is scratched; then to analyze the the impact of the impact stress wave on coating - substrate bonding strength according to the test results, finally to infer the laser power density range within which it occurs coating failure. The study shows that: after laser discrete scratching, the residual stress of the center of the laser-loaded point on matrix surface gradually reduces when the pulsed laser power density increases.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mansouri, Jaleh, Vi Khanh Truong, Shane MacLaughlin, et al. "Polymerization-Induced Phase Segregation and Self-Assembly of Siloxane Additives to Provide Thermoset Coatings with a Defined Surface Topology and Biocidal and Self-Cleaning Properties." Nanomaterials 9, no. 11 (2019): 1610. http://dx.doi.org/10.3390/nano9111610.

Повний текст джерела

Анотація:

In this work, we report on the incorporation of a siloxane copolymer additive, poly((2-phenylethyl) methylsiloxane)-co(1-phenylethyl) methylsiloxane)-co-dimethylsiloxane), which is fully soluble at room temperature, in a rapid-cure thermoset polyester coating formulation. The additive undergoes polymerization-induced phase segregation (PIPS) to self-assemble on the coating surface as discrete discoid nanofeatures during the resin cure process. Moreover, the copolymer facilitates surface co-segregation of titanium dioxide pigment microparticulate present in the coating. Depending on the composi

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Hong Wei, Sheng Zhu, and Feng Liang Yin. "SHS Reactive Arc Spray - A New Method to Prepare Multiphase Ceramic Coatings." Materials Science Forum 789 (April 2014): 518–21. http://dx.doi.org/10.4028/www.scientific.net/msf.789.518.

Повний текст джерела

Анотація:

Ti (C,N)-TiB2-Al2O3 multiphase ceramic coatings were in-situ synthesized on a steel substrate by SHS reactive arc spray technique. The composition and microstructure of the coatings were characterized by X ray diffraction, scanning electron microscopy and energy dispersive spectrometry. The results showed that multiphase ceramic coatings, composed of TiB2, TiB, TiC0.3N0.7, TiN, Al2O3 and AlN, can be prepared with the reactive cored wires by SHS reactive arc spray. The coatings exhibit the typical layer microstructure, with discrete second phases distributed in the continuous base phase. The bo

Стилі APA, Harvard, Vancouver, ISO та ін.

Korbut, Ievgen, Valeriia Parnenko, Tetiana Nikolaienko, and Oleksandr Danylenko. "The location of discrete areas of coat with globular structure on the tool surfaces with different cutting schemes." Technical sciences and technologies, no. 4 (38) (December 30, 2024): 44–56. https://doi.org/10.25140/2411-5363-2024-4(38)-44-56.

Повний текст джерела

Анотація:

The development of the aerospace and automotive industries is linked to the use of fibre polymer composites. In order to increase the wear resistance of tools for machining these materials, discrete coatings of a globular structure are used on the working surfaces of the tools. The loading of the cutting edges of such tools with a discrete coating of globular structure depends not only on their materials and coating, but also on the cutting pattern, which corresponds to microcutting by coating elements. According to this scheme, the position of globules along the edges and discrete areas perpe

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Discrete coatings"

Belov, D. S., I. V. Blinkov, A. O. Volkhonskiy, and J. Michalski. "Discrete Modified Nanostructural Wearproof Coatings TiN-Cu." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35311.

Повний текст джерела

Анотація:

Discrete modified nanostructural wearproof coatings Ti-N-Cu with crystallites size from 100 to 20 nanometers formed with ion-plasma vacuum-arc method. Copper amount in the received coatings made from 0 to 20 at. %, their hardness have considerably increased up to about 40-45 hPa in comparison with 20-22 hPa for Ti-N coverings. In this work, processes of structure and phase formation of Ti-N-Cu system coatings in a wide interval of copper concentration are investigated. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35311

Стилі APA, Harvard, Vancouver, ISO та ін.

Mansfield, Elisabeth. "Cross-linked Phospholipid Coatings in Micron-Sized Channels for Spatially Discrete Bioassays and Protein Separations." Diss., The University of Arizona, 2007. http://hdl.handle.net/10150/193940.

Повний текст джерела

Анотація:

Supported phospholipid bilayers (SPBs) are attractive surface coatings since they are resistant to non-specific protein adsorption, self-assemble, support the function of many integral and membrane bound proteins, and can be functionalized with a variety of available headgroup chemistries. Phospholipid capillary coatings have been reported for applications in capillary electrophoresis (CE), although these coatings suffer from inherent stability problems, which arise from the fragility of the interactions between the bilayer and supportive substrate. Patterned immobilized domains can be functi

Стилі APA, Harvard, Vancouver, ISO та ін.

Гуменюк, Ігор Анатолійович. "Триботехнічні властивості сталі 12Х18Н10Т, поверхнево модифікованої комбінованими покриттями". Thesis, Національний авіаційний університет, 2018. http://er.nau.edu.ua/handle/NAU/36124.

Повний текст джерела

Анотація:

Гуменюк І.А. Триботехнічні властивості сталі 12Х18Н10Т, поверхнево модифікованої комбінованими покриттями. – На правах рукопису. Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю: 05.02.04 – тертя та зношування в машинах (13 – Механічна інженерія). Національний авіаційний університет, МОН України, Київ, 2018. Дисертаційна робота присвячена вирішенню актуального науково-технічного завдання підвищення зносостійкості поверхневих шарів корозійностійкої сталі 12Х18Н10Т шляхом формування зносостійких комбінованих дифузійних, електроіскрових та композиційних електро

Стилі APA, Harvard, Vancouver, ISO та ін.

Raske, Nicholas. "A computational and experimental investigation of discrete cell gravure roll coating." Thesis, University of Leeds, 2014. http://etheses.whiterose.ac.uk/8809/.

Повний текст джерела

Анотація:

This thesis presents an investigation of discrete cell gravure roll coating using computational and experimental techniques. The gravure film thickness experiments conducted are similar to those presented in previous studies and show a near linear relationship between pickout ratio and speed ratio. This work adds detailed data of the gravure surface for use in computational modelling. Using a white light interferometer, surface images of the gravure topography were captured. From these images the key cell parameters, opening area, cell depth, cell volume and the cell patterning were characteri

Стилі APA, Harvard, Vancouver, ISO та ін.

Purdy, Stephen C., and Anthony J. Muscat. "Coating nonfunctionalized silica spheres with a high density of discrete silver nanoparticles." Springer, 2016. http://hdl.handle.net/10150/621764.

Повний текст джерела

Анотація:

© Springer Science+Business Media Dordrecht 2016<br>Reducing AgNO3 by glucose at basic pH coated the surface of silica spheres with a high density of hemispherical silver nanoparticles (average diameter 3.2±1 nm). A much lower silver concentration than is standard favored heterogeneous nucleation of silver on the silica surface at the expense of homogeneous nucleation in solution. The slow growth rate of the nuclei promoted the formation of discrete silver particles rather than a continuous shell. Based on scanning electron microscopy and transmission electron microscopy, the surface coverage

Стилі APA, Harvard, Vancouver, ISO та ін.

Sato, Akira. "Etude numérique et expérimentale de l’enrobage en voie sèche dans un mélangeur à fort taux de cisaillement." Thesis, Saint-Etienne, EMSE, 2012. http://www.theses.fr/2012EMSE0658/document.

Повний текст джерела

Анотація:

Dans cette étude, l’intérêt est porté sur l’effet des conditions opératoires sur l’enrobage en voie sèche de grosses particules « hôtes » par de fines particules « invitées » et aussi sur la modélisation de cet enrobage selon la méthode par éléments discrets (DEM) afin de mieux comprendre les phénomènes mis en jeu. Dans ce travail, les matériaux choisis comme particules hôtes sont les Suglets® et les particules invitées sont en stéarate de magnésium (StMg). Ces deux éléments sont introduits dans un mélangeur à fort taux de cisaillement, le Cyclomix. Les propriétés du produit final, comme la co

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Hua. "Nouveau procédé d'enrobage de particules en voie sèche et modélisation numérique : préparation de catalyseur solide propre pour la méthanisation." Electronic Thesis or Diss., Centrale Lille Institut, 2021. http://www.theses.fr/2021CLIL0016.

Повний текст джерела

Анотація:

L'objectif de ce travail de thèse est de proposer une nouvelle méthodologie pour préparer des supports de catalyseurs pour la réaction de méthanation. En particulier,l’application d’une technique d’enrobage de particules en voie sèche. L'enrobage à sec des particules est considéré comme une technique respectueuse de l'environnement et peu coûteuse. Cependant, il est crucial de comprendre le mécanisme du processus d'enrobage à sec, les facteurs qui affectent la performance de l'enrobage, l'évaluation de la qualité de l'enrobage, la production à grande échelle ainsi que l'exploration de nouveaux

Стилі APA, Harvard, Vancouver, ISO та ін.

Vezzoli, Massimiliano. "Intrinsic kinetics of titania photocatalysis : simplified models for their investigation." Thesis, Queensland University of Technology, 2012. https://eprints.qut.edu.au/51574/1/Massimiliano_Vezzoli_Thesis.pdf.

Повний текст джерела

Анотація:

Even though titanium dioxide photocatalysis has been promoted as a leading green technology for water purification, many issues have hindered its application on a large commercial scale. For the materials scientist the main issues have centred the synthesis of more efficient materials and the investigation of degradation mechanisms; whereas for the engineers the main issues have been the development of appropriate models and the evaluation of intrinsic kinetics parameters that allow the scale up or re-design of efficient large-scale photocatalytic reactors. In order to obtain intrinsic kine

Стилі APA, Harvard, Vancouver, ISO та ін.

Azadi, Manzour Pooya. "Modeling of mechanical and thermal responses of paper coatings under compression using discrete element method." 2007. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=788875&T=F.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Discrete coatings"

Varavka, Valery N., Oleg V. Kudryakov, Igor Yu Zabiyaka, and Natalia I. Bronnikova. "The Nucleation and Development of Wear in Nanocomposite Coatings Under the Action of a Discrete Vapor-Droplet Flow." In Springer Proceedings in Materials. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45120-2_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Verrecchia, Eric P., and Luca Trombino. "Pedogenic Features." In A Visual Atlas for Soil Micromorphologists. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67806-7_4.

Повний текст джерела

Анотація:

AbstractFrom a historical point of view, soil micromorphology was first used in order to decipher the expressions of pedogenic processes at the microscale (Kubiëna 1938). In the preceding chapters, the Atlas listed a series of descriptive tools to help with the identification of objects. This chapter deals with specific pedofeatures encountered in a large diversity of soils and directly related to pedogenic processes. Pedological features (Brewer 1964) or pedofeatures (Bullock et al. 1985) are “discrete fabric units present in soil materials that are recognizable from an adjacent material by a

Стилі APA, Harvard, Vancouver, ISO та ін.

Smolin, Alexey Yu, Galina M. Eremina, and Evgeny V. Shilko. "A Tool for Studying the Mechanical Behavior of the Bone–Endoprosthesis System Based on Multi-scale Simulation." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_5.

Повний текст джерела

Анотація:

AbstractThe chapter presents recent advances in developing numerical models for multiscale simulation of the femur–endoprosthesis system for the case of hip resurfacing arthroplasty. The models are based on the movable cellular automaton method, which is a representative of the discrete element approach in solid mechanics and allows correctly simulating mechanical behavior of a variety of elastoplastic materials including fracture and mass mixing. At the lowest scale, the model describes sliding friction between two rough surfaces of TiN coatings, which correspond to different parts of the fri

Стилі APA, Harvard, Vancouver, ISO та ін.

"DISCRETE COATINGS." In Materials Degradation and Its Control by Surface Engineering. IMPERIAL COLLEGE PRESS, 1999. http://dx.doi.org/10.1142/9781848160767_0006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"DISCRETE COATINGS." In Materials Degradation and Its Control by Surface Engineering. IMPERIAL COLLEGE PRESS, 2011. http://dx.doi.org/10.1142/9781848165021_0006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"DISCRETE COATINGS." In Materials Degradation and Its Control by Surface Engineering. IMPERIAL COLLEGE PRESS, 2003. http://dx.doi.org/10.1142/9781860947674_0006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Florea, Larisa, Dermot Diamond, and Fernando Benito-Lopez. "Opto-Smart Systems in Microfluidics." In Research Perspectives on Functional Micro- and Nanoscale Coatings. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-5225-0066-7.ch010.

Повний текст джерела

Анотація:

The possibility of using photo-stimulus to control flow in microfluidics devices is very appealing as light can provide contactless stimulation, is biocompatible and can be applied in a non-invasive and highly precise manner. One of the most popular ways to achieve photo-control flow in microfluidic channels is throughout the use of photo-responsive molecules. We review here the different principles and strategies of using photo-responsive molecules to induce or control liquid motion using light, which include the use of photo-controlled polymeric actuators, photo-sensitive coatings, or photo-

Стилі APA, Harvard, Vancouver, ISO та ін.

Alkis, Meltem, and Amitav Sanyal. "Diels–Alder Click Chemistry: A Powerful Tool for the Synthesis of Polymeric Materials." In Click Chemistry in Polymer Science. Royal Society of Chemistry, 2024. http://dx.doi.org/10.1039/9781839169885-00049.

Повний текст джерела

Анотація:

This chapter highlights the vital role played by the Diels–Alder (DA) cycloaddition reaction in the design and synthesis of various polymeric materials, ranging from discrete polymers to crosslinked networks. The robust nature of this cycloaddition reaction in assembling discrete polymers with varying skeletal arrangements is covered in sections divided according to the type of architecture. Over the years, this reaction has been employed to synthesize linear and branched polymers through step-growth type polymerization. However, in recent years, the robust nature of the DA reaction has led to

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Discrete coatings"

Frost, Nick J. "Electromagnetic Techniques for Monitoring Pipeline Coatings." In CORROSION 1987. NACE International, 1987. https://doi.org/10.5006/c1987-87311.

Повний текст джерела

Анотація:

Abstract A cathodically protected and coated buried steel pipeline can be maintained in a non-corroding condition by maintaining its insulating coating. A pipeline that exhibits high pipe to soil resistance along its entire length has healthy coating whilst low resistance sections suggest coating defects of a type that may permit corrosion and therefore may need repairing. Low resistance coating defects provide conductive paths such that if a pipe has a voltage applied to it with respect to ground, some current will leak to ground at the site of a defect. The existence of a leak to ground can

Стилі APA, Harvard, Vancouver, ISO та ін.

Esfahany, Hamid Reza. "The Study of Diffusion Ions and Water in Powder and Liquid Epoxy Coatings of Pipeline with Using Fluorescence Microscopy and AFM Methodology." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11022.

Повний текст джерела

Анотація:

Abstract FBE coatings are known to absorb moisture and pass current. They allow current to pass and exhibit a reduced electrical resistance under cathodic protection. The results of cathodic disbonding and EIS tests for FBE coatings show that with increasing of permittivity factor of coating, the radius of cathodic disbandment increases. When epoxy exposes in electrolyte, the diffusion of ions and water in coating caused of reduction of electrical resistance. The cathodic disbonding radius (r) decreases with diminish passing ions and water from epoxy coating. The precise mode by which water an

Стилі APA, Harvard, Vancouver, ISO та ін.

Whitmore, David W. "Impressed Current and Galvanic Discrete Anode Cathodic Protection for Corrosion Protection of Concrete Structures." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02263.

Повний текст джерела

Анотація:

Abstract Chloride induced corrosion is recognized as a significant disease in the nation’s concrete infrastructure. Government agencies and private owners are forced to contend with the rising costs of maintaining their failing structures. In response to this need, a number of electrochemical techniques have been developed over the last two decades in order to provide some relief from the normal regime of ‘chip and patch’ repair, or whole-scale structure replacement. This paper will provide an overview of the various corrosion mitigation techniques available and then focus on two innovative me

Стилі APA, Harvard, Vancouver, ISO та ін.

Canto, Jorge, Edgar Maya, Lorenzo M. Martinez-dela-Escalera, et al. "Engineering the Rehabilitation of Reinforced Concrete Structures in Gas and Fuel Oil Distribution Docks of the Pacific Coast of Mexico." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10120.

Повний текст джерела

Анотація:

Abstract This work serves to report on the results of the corrosion evaluations produced by Mexico´s State owned Company initiative to rehabilitate the reinforced concrete structures in their facilities that are used to supply gas and fuel oil to important coastal regions of Mexico including Mazatlan and Salina Cruz. A general assessment is presented showing the concrete repair needs and corrosion prevention requirements for the steel reinforcement in concrete beams, slabs and piles of these structures. A diagnosis was performed employing different test methods including visual survey, sonic h

Стилі APA, Harvard, Vancouver, ISO та ін.

Sibychan, Jerrin Job, Nicola Sorace, Jason Melnick, et al. "Use of Discrete Element Method to Troubleshoot Aesthetic Defects in Pharmaceutical Tablets." In Foundations of Computer-Aided Process Design. PSE Press, 2024. http://dx.doi.org/10.69997/sct.148066.

Повний текст джерела

Анотація:

Pharmaceutically elegant tablets are an expectation from pharmacists, health care providers and consumers for solid oral dosage forms. The presence of non-aesthetically pleasing defects in solid oral dosage forms can result in complaints back to the manufacturer and potentially non-compliance with medicines. The purpose of this study was to simulate and analyze the design of a tablet core and the aqueous film-coating process, to gain a better understanding of tablet defect generation, and to help eliminate the defects from the finished product. This evaluation employs Discrete Element Method (

Стилі APA, Harvard, Vancouver, ISO та ін.

Kennelley, Kevin J., Lee Bone, and Mark E. Orazem. "Current and Potential Distribution on a Coated Pipeline with Holidays: 1. Model and Experimental Verification." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92379.

Повний текст джерела

Анотація:

Abstract A two-dimensional model was developed to predict the current and potential distribution of an underground coated pipe in high resistivity soil under an impressed current, parallel anode, cathodic protection (CP) system. The model was designed to study the effect of varying-sized discrete holidays on coated pipe without having to assume that holidays simply reduce the “efficiency” of the protective coating. Full-scale experimental tests were conducted with 20 inch diameter pipe coated with 18 mils of fusion bonded epoxy. The performance of a parallel anode CP system was measured in the

Стилі APA, Harvard, Vancouver, ISO та ін.

Degerstedt, Ross M., Kevin J. Kennelley, Mark E. Orazem, and J. Matthew Esteban. "Traditional Cathodic Protection Design Methods for Coated Pipelines and the Necessity of Computer Modeling." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95346.

Повний текст джерела

Анотація:

Abstract The traditional method for designing CP systems for pipelines involves assumptions pertaining to coating efficiency, current density requirements, and current output from anodes based on anode-to-earth resistance formulas. In this paper, the traditional methods are compared to an approach that 1) considers the possibility that coating damage can be discrete and 2) allows for nonuniform current and potential distributions along the surface of the pipe. Through a combined experimental and modeling program, it was shown that the nature of coating damage has a significant impact on the pe

Стилі APA, Harvard, Vancouver, ISO та ін.

Orazem, Mark E., Kevin J. Kennelley, and Lee Bone. "Current and Potential Distribution on a Coated Pipeline with Holidays: 2. a Comparison of the Effects of Discrete and Distributed Holidays." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92380.

Повний текст джерела

Анотація:

Abstract In contrast to standard practice, the current and potential distribution on a pipe must be considered if cathodic corrosion protection is to be provided with anodes placed in close proximity to the pipe. Correct design of a CP system will depend strongly on the types of holidays assumed to exist in pipe coating. Two models for the influence of holidays in coated pipes are compared that encompass the extremes of holiday distribution. The performance predicted by these models is compared to experiment. The design constraints for a pipe with a single coating holiday are shown to be much

Стилі APA, Harvard, Vancouver, ISO та ін.

Esteban, J. Matthew, Mark E. Orazem, Kevin J. Kennelley, and Ross M. Degerstedt. "Mathematical Models for Cathodic Protection of an Underground Pipeline with Coating Holidays." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95347.

Повний текст джерела

Анотація:

Abstract Mathematical models were developed that can be used to predict the cathodic protection (CP) requirements for coated pipelines protected by parallel anodes. This work was motivated by the need to estimate the current and potential distribution on the pipe when anodes are placed near the pipeline or when discrete coating holidays expose bare steel. The mathematical model solves Laplace's equation for potential with boundary conditions appropriate for the pipe being protected, the anode, and any region through which current does not pass, such as the edge of a thaw bulb. The current dens

Стилі APA, Harvard, Vancouver, ISO та ін.

Kennelley, Kevin J., Ross M. Degerstedt, Mark E. Orazem, and J. Matthew Esteban. "Full-Scale Laboratory Evaluation of Parallel Anode CP Systems for Coated Pipelines with Comparison to 2 and 3-Dimensional Computer Models." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95528.

Повний текст джерела

Анотація:

Abstract This paper presents the results of full-scale laboratory tests to evaluate the performance of a magnesium ribbon cathodic protection system designed for a large diameter pipeline. Tests were conducted on a 305 cm section of 122 cm OD pipe externally coated with fusion bonded epoxy in a pit filled with various water resistivity environments (5,000, 20,000, and 100,000 ohm-cm). Parameters that were studied included the number of magnesium ribbon anodes connected to the pipe (one to four), coating defect size and shape (discrete or multiple circular defects versus a slit defect that ran

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Discrete coatings"

Dabkowski, John. PR-151-634-R01 Power Line Fault Current Coupling Pipeline Coating Impedance. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0011923.

Повний текст джерела

Анотація:

Research into the induction and conduction coupling response of a pipeline co-located with an electric power transmission line to assess the high voltage coupling response under fault conditions. Capacitive discharge tests were performed on primarily fusion bonded epoxy and coal tar enamel coatings containing discrete individual holidays (circa 1985). A pipeline coating response model to high voltage stress was developed, but questions arose within the pipeline community as to the veracity of capacitate discharge coating testing when the coupling was from overhead alternating current electric

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!