Готові списки джерел за темами / Dispersible materials

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Dispersible materials"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Dispersible materials".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Dispersible materials"

Hegde, Divya, Kirankumar Hullatti, Vishakha Parab Gaonkar, and Uday Kumar Bolmal. "PREPARATION OF POLYHERBAL DISPERSIBLE TABLET AND EVALUATION BY RP-HPLC." INDIAN DRUGS 57, no. 04 (2020): 32–39. http://dx.doi.org/10.53879/id.57.04.11931.

Повний текст джерела

Анотація:

The aim of the present study was to convert an Ayurvedic formulation, “trikatu churna”, into a polyherbal dispersible tablet. Standardization parameters were performed for raw materials, trikatu churna and its extract. The standardized extract was further used for formulation of the dispersible tablet. The evaluation of raw materials, trikatu churna, trikatu extract and dispersible tablet was done using preliminary phytochemical and physico-chemical tests. The pre- and post-compression parameters for polyherbal dispersible tablet formulation were within the acceptance range. The piperine conte

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhong, Wei Qiu, Guo Sun, Li Yuan Xie, and Ye Ma. "Compression Performance of Non-Dispersible Concrete Columns." Advanced Materials Research 255-260 (May 2011): 462–66. http://dx.doi.org/10.4028/www.scientific.net/amr.255-260.462.

Повний текст джерела

Анотація:

A large number of non-dispersible underwater concrete materials will be extensively used in works which span over rivers and sea, so it is important to study the performance of non-dispersible under water concrete structures. Non-dispersible underwater concrete is the concrete mixing with special additives-anti-washout admixture, which is a kind of water-soluble polymers with long-chain structure and strong absorption capacity. In the present paper, the axial and eccentric compression performance of non-dispersible underwater concrete columns were experimentally investigated. The failure modes

Стилі APA, Harvard, Vancouver, ISO та ін.

Kim, Jaemin, Chuanbing Rong, J. Ping Liu, and Shouheng Sun. "Dispersible Ferromagnetic FePt Nanoparticles." Advanced Materials 21, no. 8 (2009): 906–9. http://dx.doi.org/10.1002/adma.200801620.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wu, Huijun. "Study on mechanical properties of non-dispersible concrete in seawater environment." International Journal of Structural Integrity 11, no. 6 (2019): 809–18. http://dx.doi.org/10.1108/ijsi-07-2019-0069.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to research the hardened properties of non-dispersible concrete in seawater environment, especially in seawater environment. Design/methodology/approach The main approach is according to the experiment. Findings The findings of this paper are: first, because of the washing effect of water, the strength of underwater non-dispersible concrete is lower than that of terrestrial concrete. Second, the strength of non-dispersible underwater concrete with silica fume increases remarkably at different ages. Third, underwater non-dispersible concrete does not produce

Стилі APA, Harvard, Vancouver, ISO та ін.

Gonzalez-Carrero, Soranyel, Guillermo Mínguez Espallargas, Raquel E. Galian, and Julia Pérez-Prieto. "Blue-luminescent organic lead bromide perovskites: highly dispersible and photostable materials." Journal of Materials Chemistry A 3, no. 26 (2015): 14039–45. http://dx.doi.org/10.1039/c5ta01765c.

Повний текст джерела

Анотація:

Blue-luminescent and dispersible organic–inorganic hybrid perovskites can be produced with a high reaction yield and valuable optical properties, such as luminescence quantum yield over 20% and high photostability under UV light. This material can be assembled–disassembled reversibly.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Guoxian, Pratap C. Naha, Prabhat Gautam, David P. Cormode, and Julian M. W. Chan. "Water-Dispersible Bismuth–Organic Materials with Computed Tomography Contrast Properties." ACS Applied Bio Materials 1, no. 6 (2018): 1918–26. http://dx.doi.org/10.1021/acsabm.8b00488.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Huijun, Wu, Zhan Diao, and Kaizuo Fan. "Study on durability of non-dispersible concrete in seawater environment." International Journal of Structural Integrity 11, no. 3 (2019): 443–52. http://dx.doi.org/10.1108/ijsi-07-2019-0066.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to focus on the durability of underwater non-dispersible concrete in seawater environment. Design/methodology/approach In this paper, ten groups of underwater non-dispersible concrete mixtures were designed, and the anti-dispersibility and fluidity of the mixtures were tested. Findings The durability test analysis shows that different pouring methods have different effects on the durability of concrete. The durability of concrete poured on land is better than that poured in water. Different mineral admixtures have different effects on the durability of conc

Стилі APA, Harvard, Vancouver, ISO та ін.

Dong, Ying, Tianli Zhang, Zhengcai Xia, et al. "Dispersible SmCo5 nanoparticles with huge coercivity." Nanoscale 11, no. 36 (2019): 16962–67. http://dx.doi.org/10.1039/c9nr06653e.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Van Devener, Brian, Jesus Paulo L. Perez, and Scott L. Anderson. "Air-stable, unoxidized, hydrocarbon-dispersible boron nanoparticles." Journal of Materials Research 24, no. 11 (2009): 3462–64. http://dx.doi.org/10.1557/jmr.2009.0412.

Повний текст джерела

Анотація:

Here we describe a simple method to produce boron nanoparticles with control over surface chemistry and dispersiblity in different solvents, with potential applications ranging from high energy density fuels to neutron capture therapy. The methodology should be adaptable to many hard materials; indeed, we have produced hydrocarbon-dispersible silicon nanoparticles using a procedure similar to that described below. The method, based on high-energy milling, with subsequent sedimentation to separate aggregates, produces gram quantities of nanoparticles in a narrow distribution of particle sizes c

Стилі APA, Harvard, Vancouver, ISO та ін.

Filipovich, A. Yu, V. K. Grishchenko, A. V. Barantsova, and Yu P. Gomza. "Peculiar features of curing epoxy oligomers in water-dispersible painting materials." Polymer Science Series D 4, no. 1 (2011): 32–35. http://dx.doi.org/10.1134/s1995421211010047.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Dispersible materials"

Fletcher, Dean. "Synthesis of dispersible nanostructures using anti-sintering cast materials." Thesis, University of Birmingham, 2018. http://etheses.bham.ac.uk//id/eprint/8591/.

Повний текст джерела

Анотація:

At the elevated temperatures required for metal carbide synthesis, atomic diffusion across particle boundaries can occur, resulting in the fusion of smaller particles into larger ones. This process is termed sintering. By providing a physical barrier for the inhibition of sintering, in the form of easily removable alkaline earth metal oxide “cast materials”, this thesis shows that Prussian Blue nanoparticles can undergo thermal decomposition to produce discrete Fe3C nanoparticles. The overarching aim of this work is to push the boundaries of metal carbide synthesis by forming the basis of a te

Стилі APA, Harvard, Vancouver, ISO та ін.

Tawa, Tsutomu. "Studies on Reactive Water-Dispersible Polyisocyanate and Polyurethane-Urea Micelle as Coating Materials." 京都大学 (Kyoto University), 2008. http://hdl.handle.net/2433/57280.

Повний текст джерела

Анотація:

Kyoto University (京都大学) 0048 新制・課程博士 博士(工学) 甲第13847号 工博第2951号 新制||工||1436(附属図書館) 26063 UT51-2008-C763 京都大学大学院工学研究科高分子化学専攻 (主査)教授伊藤紳三郎, 教授中條善樹, 教授瀧川敏算 学位規則第4条第1項該当

Стилі APA, Harvard, Vancouver, ISO та ін.

Cupone, I. E. "MALTODEXTRINS AS FILM FORMER MATERIALS FOR THE DESIGN OF ORAL DISPERSIBLE FILMS AND TRANSDERMAL PATCHES." Doctoral thesis, Università degli Studi di Milano, 2009. http://hdl.handle.net/2434/152399.

Повний текст джерела

Анотація:

This work aimed to study maltodextrin as main film forming material and their application in the design of oral dispersible films and pressure sensitive adhesives. Maltodextrins (MDX), having dextrose equivalent (DE) in the 6-12 range plasticized with 16–20% w/w glycerine (GLY), are suitable to produce fast-dissolving films by casting and solvent evaporation or hot-melt extrusion. Compared to the hot-melt extrusion method, the casting method appeared more reliable for the production of fast-dissolving films since the dosage forms exhibited the best performances in terms of in vitro and in viv

Стилі APA, Harvard, Vancouver, ISO та ін.

Qu, Haiou. "Surface Functionalized Water-Dispersible Magnetite Nanoparticles: Preparation, Characterization and the Studies of Their Bioapplications." ScholarWorks@UNO, 2012. http://scholarworks.uno.edu/td/1536.

Повний текст джерела

Анотація:

Iron oxide magnetic nanoparticle synthesis and their surface functionalization hold a crucial position in the design and fabrication of functional materials for a variety of biomedical applications. Non-uniform nanoparticles with poor crystallinity, prepared by conventional methods, have only limited value in biological areas. Large scale synthesis methods that are able to produce high quality, mono-dispersed iron oxide nanoparticles using low cost and environment friendly chemicals are highly desirable. Following synthesis, appropriate surface functionalization is necessary to direct the disp

Стилі APA, Harvard, Vancouver, ISO та ін.

Острога, Руслан Олексійович, Руслан Алексеевич Острога, Ruslan Oleksiiovych Ostroha, Микола Петрович Юхименко, Николай Петрович Юхименко та Mykola Petrovych Yukhymenko. "Особливості процесу капсулювання мінеральних добрив органічною оболонкою". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40184.

Повний текст джерела

Анотація:

Капсулювання дисперсних матеріалів у стані псевдозрідження є поширеним фізичним методом нанесення захисних оболонок. Нанесена на поверхню частинок оболонка створює додатковий опір масоперенесенню в процесі розчинення добрив. Як результат цього, непродуктивні втрати елементів живлення зменшуються [1].

Стилі APA, Harvard, Vancouver, ISO та ін.

Brien, Joshua V. "DEVELOPMENT OF CEMENTITIOUS MATERIALS FOR ADHESION TYPE APPLICATIONS COMPRISING CALCIUM SULFOALUMINATE (CSA) CEMENT AND LATEX POLYMER." UKnowledge, 2014. http://uknowledge.uky.edu/ce_etds/19.

Повний текст джерела

Анотація:

The objective of this research was to develop high performing polymer modified calcium sulfoaluminate (CSA) cement materials for use in applications requiring superior adhesion characteristics. Little information is available describing interactions of CSA cement containing minor phase tri-calcium aluminate (C3A) with commonly used admixtures. Given the scarcity of information, a basic approach for developing cementitious materials was followed. The basic approach consisted of four tasks: cement design, admixture design, polymer design and testing developed materials. The iterative, time consu

Стилі APA, Harvard, Vancouver, ISO та ін.

Forrer, Daniel. "Role and Eective Treatment of Dispersive Forces in Materials." Doctoral thesis, Università degli studi di Padova, 2010. http://hdl.handle.net/11577/3427094.

Повний текст джерела

Анотація:

DFT and DFT-D calculations have been carried out on several chemical systems, ranging from molecules to crystalline polymers, bulk graphite, self-assembled phases of large molecules on metal surfaces and small molecules absorbed in porous organic-inorganic materials. Joining insights from calculations with experimental outcomes, the structural and electronic behavior of complex chemical systems have been described and explained, allowing a deeper understanding of the studied phenomena. Thanks to the implementation of a correction scheme to DFT, allowing the effective treatment of dispersion

Стилі APA, Harvard, Vancouver, ISO та ін.

Janyani, Vijay. "Modelling of dispersive and nonlinear materials for optoelectronics using TLM." Thesis, University of Nottingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.417228.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Peterson, Brian. "Energy Dispersive Spectroscopy Characterization of Solute Segregation in Ti-6Al-4V." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1293718338.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Liguo. "Incorporation of dispersive materials in the envelope finite element (EVFE) method." Thesis, University of Ottawa (Canada), 2004. http://hdl.handle.net/10393/26817.

Повний текст джерела

Анотація:

In this thesis computationally efficient methods of including materials with Lorentz-type dispersion in the envelope finite-element time-domain (EVFE) method are developed and presented. A new perfectly matched layer (PML) mesh truncation scheme, which allows the PML to be applied in Lorentz-type dispersive material has also been derived. These new formulations have been implemented and applied to specific examples, and the approach validated through comparison with results obtained using alternative methods. In particular, it has been demonstrated through the examples that the method develope

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Dispersible materials"

Lieberman, A. George. Transient analysis of electromagnetic reflection from dispersive materials. U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

1943-, Goodhew Peter J., and Royal Microscopical Society, eds. Light-element analysis in the transmission electron microscope. Oxford University Press (for) Royal Microscopical Society, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pastore, John. Assessing the Impacts of Pulp Loading from Non-Dispersible Materials on Downstream Sewer Systems. IWA Publishing, 2016.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kyotani, T., and H. Orikasa. Templated carbon nanotubes and the use of their cavities for nanomaterial synthesis. Edited by A. V. Narlikar and Y. Y. Fu. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533060.013.11.

Повний текст джерела

Анотація:

This article focuses on templated carbon nanotubes (CNTs) and how their cavities can be used for the synthesis of nanomaterials. In particular, it demonstrates how effectively the CNTs can be functionalized by the template carbonization technique. The article first describes the method for synthesizing CNTs and carbon nano-test-tubes (CNTTs). It then considers the controlled filling of magnetic materials into CNTTs, taking into account the electrochemical deposition of Ni-Fe alloy and the magnetic properties of NiFe-filled CNTTs. It also examines the synthesis of water-dispersible and magnetic

Стилі APA, Harvard, Vancouver, ISO та ін.

Frs, M. Ashby, John C. Russ, R. Kiessling, and J. Charles. Fundamentals of Energy Dispersive X-Ray Analysis: Butterworths Monographs in Materials. Elsevier Science & Technology Books, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Dispersible materials"

Wise, Terry D., Stephen H. Murdock, and Richard A. Eppler. "Dry Dispersible Pigments." In Materials & Equipment/Whitewares: Ceramic Engineering and Science Proceedings, Volume 12, Issue 1/2. John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470313183.ch31.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Han, Youn Gyu, Takafumi Kusunose, and Tohru Sekino. "The Preparation and Characterization of Organic Solvent Dispersible Polyaniline Coated Titania Hybrid Nanocomposites." In Eco-Materials Processing and Design IX. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-472-3.161.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ozel, Tuncay. "Solution Dispersible Metal Nanorings: Independent Control of Architectural Parameters and Materials Generality." In Coaxial Lithography. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45414-6_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sefcik, Alan. "Computer-Controlled Weighing Systems for the Production of Colored Glazes, Using Easily Dispersible Ceramic Stains." In Materials & Equipment/Whitewares: Ceramic Engineering and Science Proceedings, Volume 12, Issue 1/2. John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470313183.ch20.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Y. F., C. X. Huang, Q. He, et al. "Heterostructure Induced Dispersive Shear Bands in Heterostructured Cu." In Heterostructured Materials. Jenny Stanford Publishing, 2021. http://dx.doi.org/10.1201/9781003153078-17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shindo, Daisuke, and Tetsuo Oikawa. "Energy Dispersive X-ray Spectroscopy." In Analytical Electron Microscopy for Materials Science. Springer Japan, 2002. http://dx.doi.org/10.1007/978-4-431-66988-3_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Shvartsburg, A. B. "Anharmonic Alternating Electromagnetic Fields in Dispersive Materials." In Impulse Time-Domain Electromagnetics of Continuous Media. Birkhäuser Boston, 1999. http://dx.doi.org/10.1007/978-1-4612-0773-3_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schirmacher, W. "Transition from Gaussian to Dispersive Atomic Transport in Amorphous Materials." In Amorphous and Liquid Materials. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3505-1_22.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tiedje, T. "Multiple Trapping Models for Dispersive Admittance of Amorphous MIS Structures." In Physics of Disordered Materials. Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2513-0_37.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bagdoev, Alexander G., Vladimir I. Erofeyev, and Ashot V. Shekoyan. "Waves in Viscous, Dispersive, Nonlinear, Preliminary Deformable Layer with a Free Surface." In Advanced Structured Materials. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-37267-4_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Dispersible materials"

Laliberte, L. H., D. R. Skelton, and C. Handsy. "Zinc Rich Primer Coatings to Extend the Service Life of Army Vehicles." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06277.

Повний текст джерела

Анотація:

Abstract Three zinc-rich primers (ZRPs) were applied to 1018 steel test panels that had been cleaned by grit blasting or with a wire brush powered by a portable drill. These panels were then coated with either solvent-based or water-dispersible military specification primers and chemical agent resistant top coats and scribed. Twenty-four coating systems were prepared. Two accelerated corrosion tests were conducted on these panels, the American Society for Testing and Materials (ASTM) B117 for 2000 hours and the Society of Automotive Engineers (SAE) J2334 for 120 cycles. An evaluation of the co

Стилі APA, Harvard, Vancouver, ISO та ін.

Bandara, Nuwan, Martina Gugliermino, Mauro Lumia, Giuseppe Virone, Francesca Vipiana, and David Orlando Rodriguez-Duarte. "Complex-Valued DNN for Broadband Dielectric Characterization of Dispersive Lossy Materials." In 2024 IEEE 1st Latin American Conference on Antennas and Propagation (LACAP). IEEE, 2024. https://doi.org/10.1109/lacap63752.2024.10876315.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ward, Gary L., Susan Anderson, and Mary K. Maner. "MIC and Corrosion of Service Water System Materials." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91278.

Повний текст джерела

Анотація:

Abstract The susceptibility of materials of construction to undergo corrosive attack in untreated, soft service water prompted Duke Power to initiate a service water system materials study. This study included both installed materials (carbon steel, Admiralty brass, and type 304 stainless steel) and candidate alternate materials (type 316 stainless steel, Seacure(1) and AL-6XN(2)). The effects of flow (stagnant, intermittent and constant) and seasonal variations in temperature and water quality on general and localized corrosion rates were evaluated in a nominal one year exposure. This study i

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, C. P., Z. Ma, T. Anada, J. P. Hsu, and C. Christopoulos. "In-Situ Broadband Characterization of Complex Permittivity and Permeability of Magnetic Dispersive Materials." In 2006_EMC-Europe_Barcelona. IEEE, 2006. https://doi.org/10.23919/emc.2006.10813051.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Machut, McLean, Kumar Sridharan, and Todd Allen. "Corrosion of Candidate Materials for Lead-Cooled Reactors." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05590.

Повний текст джерела

Анотація:

Abstract The corrosion effects of Lead-Bismuth Eutectic (LBE) on three steels (HCM12A, T22, and 9Cr-2WVTa) have been studied for the purposes of advancing structural and cladding materials for use in such applications as Lead-Cooled Fast Reactors and Accelerator Driven Systems. Test samples of the three steels have been exposed to high temperature (500°C) oxygen controlled flowing Lead-Bismuth Eutectic in the LBE DELTA Loop at Los Alamos National Laboratories for durations of 333, 666, and 1000 hours. The corrosion product was examined by optical and Scanning Electron Microscopy (SEM) and furt

Стилі APA, Harvard, Vancouver, ISO та ін.

Ziomek-Moroz, M., S. D. Cramer, G. R. Holcomb, B. S. Covino, S. J. Bullard, and P. Singh. "Corrosion Behavior of Metallic Materials for Solid Oxide Fuel Cell Applications." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05451.

Повний текст джерела

Анотація:

Abstract Topography and phase composition of the scales formed on commercial ferritic stainless steel and two experimental nickel-based alloys were studied in atmospheres simulating solid oxide fuel cell (SOFC) environments. Corrosion experiments were carried out under SOFC dual environment conditions with air on one side of the sample and hydrogen on the other side for 100 h at 700 °C. Post-corrosion surface characterization techniques of the air side of each material included scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

Artioli, Marcello, Ugo Reggiani, and Leonardo Sandrolini. "Determination of the Complex Permittivity of Dispersive Materials Without Assuming a Dielectric Relaxation Model." In 2010_EMC-Europe_Wroclaw. IEEE, 2010. https://doi.org/10.23919/emc.2010.10826311.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zapata-Cano, Pablo H., Salvador Moreno-Rodríguez, Stamatios Amanatiadis, Antonio Alex-Amor, Zaharias D. Zaharis, and Carlos Molero. "Transient Analysis of Space-Time Frequency-Dispersive Metal Slabs." In 2024 Eighteenth International Congress on Artificial Materials for Novel Wave Phenomena (Metamaterials). IEEE, 2024. http://dx.doi.org/10.1109/metamaterials62190.2024.10703330.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ziomek-Moroz, M., T. Adler, and P. King. "Materials Performance of Ferritic Steel in Combustion Gases for Heat Exchanger Applications in Solid Oxide Fuel Cell Systems." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08460.

Повний текст джерела

Анотація:

Abstract Ferritic steels have been recognized as candidates for their applications in heat exchangers used in Solid Oxide Fuel Cells’ balance of plant. Combustion gases flowing through those heat exchangers can be very corrosive. Therefore, the National Energy Technology Laboratory determined materials performance of commercial S43000 stainless steel exposed to a simulated combustion gas at 800 °C. The exposure experiments were conducted on flat samples in the simulated combustion gas: 19vol% O2+6vol% H2O + 4vol% CO2 +71vol% N2 under isothermal conditions. After the experiment, the surface of

Стилі APA, Harvard, Vancouver, ISO та ін.

Yun Tack Lee and Kyoungja Woo. "Preparation of water-dispersible and biocompatible iron oxide nanoparticles for MRI agent." In 2006 IEEE Nanotechnology Materials and Devices Conference. IEEE, 2006. http://dx.doi.org/10.1109/nmdc.2006.4388813.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Dispersible materials"

Trott, W. M., J. N. Castaneda, J. J. O'Hare, et al. Dispersive Velocity Measurements in Heterogeneous Materials. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/773898.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lieberman, A. George. Transient analysis of electromagnetic reflection from dispersive materials. National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.tn.1202.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tokarz, R. D., L. J. Defferding, M. D. Adickes, et al. Evaluation of options for disposition of dispersible material in B-Cell. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10104737.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ting, Jason. Quantitative evaluation of material composition of composites using x-ray energy-dispersive NDE technique. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10184977.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tarpley, Danielle, and David Perkey. Impacts of Granular Activated Carbon (GAC) on erosion behavior of muddy sediment. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/44841.

Повний текст джерела

Анотація:

Recent policy changes regarding the placement of dredged material have encouraged the USACE to increase its beneficial use (BU) of the sediments dredged from the nation’s navigation channels. A good portion of this material is fine grained (<63 μm), which traditionally has limited use in BU applications, in part due to its dispersive nature. A need exists to evaluate the potential of stabilizing and using fine-grained sediment (FGS) in BU projects. Previous studies have shown the addition of granular sand to FGS reduces the mobility of the bed. The potential of using Granular Activated Carb

Стилі APA, Harvard, Vancouver, ISO та ін.

O. C. Bernardo, Felipe, Sebastião V. Canevarolo, and José A. C. G. Covas. Evaluation of temperature impact during extrusion on the mixing levels of PS/PA6 by optical monitoring. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.ex.2.

Повний текст джерела

Анотація:

This work uses on-line monitoring of turbidity to ascertain the temperature impact on the mixing performance of kneading blocks with different geometries. For this purpose, one of the barrel segments of the extruder was modified to incorporate four sampling devices and a slit die containing optical windows. The experiments consisted in reaching steady extrusion and then adding a small amount of tracer. Upon opening each sampling device, material was laterally detoured from the local screw channel and its turbidity were measured by the optical detector. Residence time distribution (RTD) curves

Стилі APA, Harvard, Vancouver, ISO та ін.

APPLICATION RESEARCH OF V CONTAINING HIGH STRENGTH WEATHERING STEEL IN STEEL STRUCTURE BUILDING. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.090.

Повний текст джерела

Анотація:

Application research of V containing high strength weathering steel in steel structure building was conducted. The research shows that: adding 0.04% V into weathering steel can lead to grain refinement of ferrite, thereby improving steel performance. Fine polygonal ferrite can make for obvious yield platform, and front cooling method can make V(C, N) precipitation in ferrite fine and dispersive to enhance dislocation pinning, which can further enhance yield effect. In this research V containing weathering steel can realize 500MPa of strength grade, 0.84 of yield ratio, 26.0% of elongation, 3.0

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!