Готові списки джерел за темами / Duplex Stainless Steel SAE 2205

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Частини книг
  4. Тези доповідей конференцій

Добірка наукової літератури з теми "Duplex Stainless Steel SAE 2205"

Автор: Grafiati
Опубліковано: 3 червня 2025
Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Duplex Stainless Steel SAE 2205".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Duplex Stainless Steel SAE 2205"

1

C.Selva, Ganesh, Dr.T.Vigraman, D.Sujith, M.Velmanikandan, and T.Vetrivel. "MICROSTRUCTURAL AND TRANSIENT THERMAL ANALYSIS OF TIG WELDED JOINT SAE 2205 WITH AISI 304 WITH AISI 308 FILLER METAL." International Journal of Engineering Technologies and Management Research 4, no. 10 (2017): 15–25. https://doi.org/10.5281/zenodo.1040736.

Повний текст джерела
Анотація:
<strong><em>In the present work SAE 2205 is welded with AISI 304 using AISI 308 filler wire. TIG welding current was maintained at 110, 120 and 130 Amp and the voltage was set at 40 Volt. A constant welding speed of 0.5 mm/s was maintained for all the experiments. The optical microscopic examination of the welded samples revealed the presence of recrystalized zone, mushy zone at the weld metal SAE 2205 side and columnar grains adjacent to the heat affected zone. The maximum hardness value of Rc 29 was observed in the welded region. The increase in hardness value was attributed to absorption of
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Tehovnik, Franc, Borut Žužek, and Jaka Burja. "Hot tensile testing of SAF 2205 duplex stainless steel." Materiali in tehnologije 50, no. 6 (2016): 989–93. http://dx.doi.org/10.17222/mit.2016.242.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Oh, Y. J., W. J. Yang, J. H. Lee, D. H. Kim, W. D. Yoo, and J. H. Lee. "Effect of Cooling Rate on Microstructural and Mechanical Properties of SAF 2205 Duplex Stainless Steel." Journal of the Korean Society for Heat Treatment 26, no. 1 (2013): 14–20. http://dx.doi.org/10.12656/jksht.2013.26.1.14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Liu, Xiao, and Jing Long Liang. "Effect of Rare Earth Metals on Microstructure and Impact Property of Duplex Stainless Steel." Advanced Materials Research 662 (February 2013): 424–27. http://dx.doi.org/10.4028/www.scientific.net/amr.662.424.

Повний текст джерела
Анотація:
The effect of rare earth element on structure and mechanical properties of 2205 duplex stainless steel were studied by metallographic examination, scanning electron microscope (SEM), tensile test and impact test. The results show that the proper amount of rare earth can refine microstructure of 2205 duplex stainless steel. Fracture is changed from cleavage to ductile fracture by adding RE to 2205 duplex stainless steel. 2205 duplex stainless steel containing 0.05% RE can improve its impact toughness, and the transverse impact toughness is increased 15.56% at -20°C respectively comparing with t
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Liu, Xiao, and Long Mei Wang. "Effects of Rare Earth Addition on the Inclusions and Mechanical Properties of 2205 Duplex Stainless Steel." Advanced Materials Research 503-504 (April 2012): 463–68. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.463.

Повний текст джерела
Анотація:
The effects of rare earth metals on the inclusions and the mechanical properties of 2205 duplex stainless steel were studied by metallographic examination, scanning electron microscope (SEM) and energy spectrum analysis. The results show that the morphologies and sizes of non-metallic inclusions in 2205 duplex stainless steel are changed, and rare earth metals played a very good role of modifying inclusions. The fracture mode of 2205 duplex stainless steel is typical cleavage fracture, but quasi-cleavage and dimple fracture after adding RE into the steel, and the spherical inclusions of rare e
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Liu, Xiao, and Long Mei Wang. "Effect of Rare Earth Metals on Inclusions and Impact Property of 2205 Duplex Stainless Steel." Advanced Materials Research 472-475 (February 2012): 411–18. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.411.

Повний текст джерела
Анотація:
The effect of rare earth metals on inclusions and impact toughness of 2205 duplex stainless steel were studied by SEM and electron spectroscopy. Thermodynamic calculation was used to analyze the formation of RE inclusions in 2205 duplex stainless steel. The result shows that aluminosilicate compound inclusion and sulfide inclusion can be entirely replaced by RE2O2S and RES. Fracture is changed from cleavage to ductile fracture by adding RE to the 2205 duplex stainless steel, and the spherical rare earth oxysulfide inclusions-RE2O2S in the dimple are the main factors. The transverse impact valu
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Liu, Xiao, and Long Mei Wang. "Thermodynamic Analysis and Observation of Inclusions in 2205 Duplex Stainless Steel with Rare Earth Metals." Advanced Materials Research 512-515 (May 2012): 1833–39. http://dx.doi.org/10.4028/www.scientific.net/amr.512-515.1833.

Повний текст джерела
Анотація:
The effect of rare earth metals on modifying inclusions of 2205 duplex stainless steel was studied by metallographic examination, SEM and electron spectroscopy. Thermodynamic calculation was used to analyze the formation of RE inclusions in 2205 duplex stainless steel. According to the composition of 2205 duplex stainless steel liquid and thermodynamic data, it may calculate and predict the kinds of RE inclusions. And the result shows that aluminosilicate complex inclusion and sulfide inclusion can be entirely replaced by RE2O2S and RES that are spherical.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zhang, Ji Xiang, Zheng Jun Li, Guo Yin An, and Zhi Xiang Wang. "Flow Stress Behavior of 2205 Duplex Stainless Steel during Warm Tensile." Advanced Materials Research 538-541 (June 2012): 1605–10. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1605.

Повний текст джерела
Анотація:
The flow behavior of 2205 duplex stainless steel for ship sheet in the strain rate ranging from 0.001 s-1 to 0.1s-1 and temperature ranging from 473K to 1073 K is studied on AG-10TA universal material testing machine. The results show that the 2205 duplex stainless steel is a strain rate sensitive material, and the flow stress increases with the increase of strain rate and decreases with the increase of temperature. The average elongation of the 2205 duplex stainless steel is above 25% with the temperature ranging from 473K-873K, and the elongation is above 47% at 1073K; At last, the flow stre
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Victor, A. Adedayo. "Corrosion Behaviour of Annealed 2205 Duplex Stainless Steel in Sulphuric Acid Environment." International Journal of Business Management and Technology 2, no. 5 (2023): 108–12. https://doi.org/10.5281/zenodo.7648402.

Повний текст джерела
Анотація:
t: This paper presents a study that investigates the corrosion behavior of annealed 2205 duplex stainless steel in sulphuric acid environment. Duplex 2205 stainless steel black bar in ASTM A276 was obtained and annealed in solite furnace for 45 minutes. A control sample which was not heat treated was also prepared. The annealed and the control samples which were metallographically prepared were then analyzed for corrosion behavior in sulphuric acid using potentiodynamic test/analysis. The potentiodynamic polarization plot generated showed that the annealed samples exhibit less corrosion resist
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Du, Juan, Mengyao Yu, Pingli Liu, et al. "Corrosion behavior of 2205 duplex stainless steel in acidizing stimulation solution for oil and gas wells at 200°C." Anti-Corrosion Methods and Materials 69, no. 2 (2022): 149–59. http://dx.doi.org/10.1108/acmm-07-2021-2519.

Повний текст джерела
Анотація:
Purpose This paper aims to analyze the high temperature (200°C) corrosion behavior of 2205 duplex stainless steel in acidizing stimulation solution containing hydrochloric acid (HCl) and acetic acid. Design/methodology/approach The corrosion rate of 2205 duplex stainless steel in all kinds of acid solutions was calculated through immersion tests and electrochemical test. The corrosion product composition is analyzed by X-ray diffraction analysis. The element composition and element distribution before and after corrosion were analyzed by an X-ray energy spectrometer. The corrosion morphology o
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Duplex Stainless Steel SAE 2205"

1

Amaro, Lucinda Oliveira. "Estudo da resistÃncia à corrosÃo do aÃo inoxidÃvel duplex UNS S31803 OU SAF 2205 submetido a processo de soldagem." Universidade Federal do CearÃ, 2006. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=3196.

Повний текст джерела
Анотація:
CoordenaÃÃo de AperfeiÃoamento de NÃvel Superior<br>Este trabalho objetiva estudar a influÃncia da energia de soldagem na resistÃncia à corrosÃo do aÃo inoxidÃvel duplex UNS S31803 ou SAF 2205. Para isto foi avaliada a susceptibilidade do material soldado à corrosÃo intergranular e por pite e sua relaÃÃo com a microestrutura da zona afetada termicamente pelo calor durante o processo de soldagem. Foram tambÃm avaliadas a microdureza e a quantificaÃÃo de fases para correlacionÃ-los com a microestrutura. As tÃcnicas eletroquÃmicas utilizadas neste estudo foram a de reativaÃÃo e a de polarizaÃÃo
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lessa, Cleber Rodrigo de Lima. "Qualificação mecânica e metalúrgica do processo de soldagem FHPP aplicado no aço inoxidável duplex SAF 2205." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/151400.

Повний текст джерела
Анотація:
O objetivo deste estudo é qualificar reparos realizados através do processo de Soldagem por Fricção com Pino Consumível (SFPC), ou Friction Hydro Pillar Processing (FHPP) em chapas de aços inox duplex SAF 2205 (AID UNS S31803). Em paralelo, fazer uma comparação relativa ao mesmo material reparado com o processo TIG (GTAW). Após a obtenção das juntas reparadas em ambos os processos, estas passaram por rigorosa análise microestrutural e ensaios mecânicos para, dessa forma, qualificá-las através de critéios usuais recomendados em normas para utilização no restauro de estruturas que utilizam o mat
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nunes, Everton Barbosa. "âPROPRIEDADES MECÃNICAS E CARACTERIZAÃÃO MICROESTRUTURAL NA SOLDAGEM DO AÃO INOXIDÃVEL DUPLEX UNS S31803 (SAF 2205)â." Universidade Federal do CearÃ, 2009. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=3918.

Повний текст джерела
Анотація:
AgÃncia Nacional do PetrÃleo<br>FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico<br>Os aÃos inoxidÃveis duplex possuem boas propriedades mecÃnicas e excelente resistÃncia à corrosÃo, aumentando seu uso em ambientes agressivos. Estas caracterÃsticas os fazem muito utilizados principalmente na indÃstria quÃmica e petroquÃmica. Geralmente, a fabricaÃÃo e reparo destes equipamentos envolvem operaÃÃes de soldagem, sendo que à muito importante avaliar a influÃncia dos parÃmetros de soldagem multipasse no balanceamento de fases, na microestrutura e microdureza. Primeiramente, fo
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Gogola, Eliane Engel. "Estudo da corrosão dos aços AISI 1020, 304L, 316L e duplex SAF 2205 em planta do tratamento de efluentes em indústria de celulose e papel." UNIVERSIDADE ESTADUAL DE PONTA GROSSA, 2014. http://tede2.uepg.br/jspui/handle/prefix/1457.

Повний текст джерела
Анотація:
Made available in DSpace on 2017-07-21T20:42:46Z (GMT). No. of bitstreams: 1 Eliane Engel Gogola.pdf: 5376053 bytes, checksum: d9613bf1e372ef92965596e2136c6891 (MD5) Previous issue date: 2014-08-28<br>In this work were studied of the chemical product’s influence once used through the membrane’s cleaning process of the ultrafiltration plant in the effluent treatment station, in a pulp and paper company, located in Paraná State – Brazil on the corrosive process presented in the plant. It was determined the electrochemical parameters through electrochemical methods, according to the norm ASTM G
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Dalton, John Christian. "Surface Hardening of Duplex Stainless Steel 2205." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1480696856644048.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ruiner, Thomas H. "Characterization of thermal damage in 2205 duplex stainless steel with nonlinear ultrasonics (nlu)." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37156.

Повний текст джерела
Анотація:
Duplex stainless steels have a microstructure that consists of almost equal shares of austenite and ferrite, which leads to excellent material properties. During production and processing, the steel can be exposed to high temperatures which leads to the development of a third (sigma) phase, and thus to a change in material properties. The objective of this research is to assess the material damage in thermally degraded 2205 duplex stainless steel using nonlinear ultrasonics (NLU). Seven 2205 duplex stainless steel specimens are thermally degraded at 700 C for a series of different time duratio
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zimmermann, Margarita Rosa Bobadilla. "Nitretação a plasma de um aço inoxidável duplex 2205." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-13082015-165238/.

Повний текст джерела
Анотація:
Os aços inoxidáveis duplex se caracterizam por terem boas propriedades mecânicas e de resistência a corrosão, no entanto as suas propriedades de resistência ao desgaste são baixas. Para melhorar as propriedades superficiais desses materiais são utilizados tratamentos termoquímicos como a nitretação a plasma. Este tratamento é feito em temperaturas baixas para evitar a formação de nitretos de cromo, os quais quando são formados empobrecem o teor de cromo da matriz metálica, evitando que se forme a camada passiva, que confere resistência a corrosão a este tipo de material. Também, a nitretação a
Стилі APA, Harvard, Vancouver, ISO та ін.
8

He, Mei. "Evaluation of the Susceptibility of Duplex Stainless Steel 2205 to Hydrogen Assisted Cracking in REAC System." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1471554106.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Tolunguc, Burcu. "Microstructural And Mechanical Characterization Of Duplex Stainless Steel Grade 2205 Joined By Hybrid Plasma And Gas Metal Arc Welding." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614001/index.pdf.

Повний текст джерела
Анотація:
In the present study, the applicability of the hybrid plasma arc welding, in which a keyhole is responsible of deep penetration and a filler wire electrode supplies a high deposition rate, was examined. The microstructural evolutions in grade 2205 duplex stainless steel plates joined by keyhole and melt-in techniques were investigated. The specimens obtained from welded plates having thickness of 8 mm were examined via optical and scanning electron microscopy. Metallographic investigations were supported by X-ray diffraction and energy dispersed spectra analyses by characterizing the phases fo
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Liu, Jialin. "Mechanism of Biocorrosion Caused by Biofilms and Its Mitigation." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1511966633638842.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Duplex Stainless Steel SAE 2205"

1

Chen, C. Y., H. W. Yen, T. H. Yu, and Je Rei Yang. "Intragranularly Nucleated Austenite in a 2205 Duplex Stainless Steel." In THERMEC 2006. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.4881.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bilyy, O., R. B. Chi Bojórquez, G. Domínguez Rodríguez, and C. A. León Gomez. "Corrosion fatigue of duplex stainless steel 2205 welded with magnetic field." In Welding and Related Technologies. CRC Press, 2025. https://doi.org/10.1201/9781003518518-38.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ni, Jie, Congsen Wu, Honggang Zhong, and Qijie Zhai. "Solidification Structure Refinement of 2205 Duplex Stainless Steel by Pulse Magneto-Oscillation." In TMS2015 Supplemental Proceedings. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093466.ch6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ni, Jie, Congsen Wu, Honggang Zhong, and Qijie Zhai. "Solidification Structure Refinement of 2205 Duplex Stainless Steel by Pulse Magneto-Oscillation." In TMS 2015 144th Annual Meeting & Exhibition. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48127-2_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lee, S. M., S. Yang, S. T. Kim, Y. S. Park, and B. M. Moon. "Centrifugal Casting Practice and Microstructure and Mechanical Properties of a 2205 Duplex Stainless Steel." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.2527.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Granados-Alejo, V., C. A. Vázquez-Jiménez, C. Rubio-González, and G. Gómez-Rosas. "Fatigue Life Extension of 2205 Duplex Stainless Steel by Laser Shock Processing: Simulation and Experimentation." In Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-70365-7_36.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zong, Pengfei, Davood Nakhaie, and Edouard Asselin. "Uniform and Localized Corrosion Behavior of 2205 Duplex Stainless Steel for Hydrometallurgical Applications: A Statistical Analysis." In Proceedings of the 63rd Conference of Metallurgists, COM 2024. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-67398-6_97.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Hou, Chun-Kan, and Chang-Chia Liu. "Effect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of 2205 Duplex Stainless Steel." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470444191.ch20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Choudhary, Mukesh Kumar, V. Dhinakaran, and T. Jagadeesha. "Comparison of Duplex Stainless Steel (2205) Spur Gears Cut by Wire Electrodischarge Machining (WEDM) and Hobbing Under Dry Condition." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4739-3_23.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Hu, Yu, and Jiaxiang Xue. "Effects of Process Parameters on the Weld Quality During Double-Pulsed Gas Metal Arc Welding of 2205 Duplex Stainless Steel." In Transactions on Intelligent Welding Manufacturing. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8330-3_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Duplex Stainless Steel SAE 2205"

1

Singh, Preet M., Jamshad Mahmood, and Pablo Conde. "Stress Corrosion Cracking and Corrosion Susceptibility of Duplex Stainless Steels in Caustic Solutions." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05196.

Повний текст джерела
Анотація:
Abstract Changes in pulping methods have generally increased the cooking temperatures along with the sulfidity and alkalinity of pulp mill liquors. These changes have led to accelerated corrosion rates in carbon steel equipment used in pulp mills. There is need to define environmental limits of candidate alloys, typically used in old as well as new pulp mill equipment. Depending upon the type of pulping liquor and environmental conditions, different mitigation methods can be employed to safely continue to use the old pulp mill equipment. Corrosion resistant metallic coatings have been used on
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Singh, A. K., G. Singh, and A. Sharma. "On the Suitability of Steels in Handling Peracid Bleach Media a Corrosion Study." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06235.

Повний текст джерела
Анотація:
Abstract The paper industry is replacing chlorine based bleach chemicals with non-chlorine containing chemicals e.g. peroxide, ozone, peracids etc. with the aim of controlling water pollution. Changeover to the new chemicals in the bleaching process is likely to affect the metallurgy of the existing bleach plants due to change in the corrosivity of the media. Accordingly, corrosion investigations were performed in peracids namely peracetic acid and Caro's acid to test the suitability of mild steel, austenitic stainless steels 304L, 316L and duplex stainless steel 2205 in these liquors. Electro
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Niemeläinen, Pasi, Martti Pulliainen, Jarmo Kahala, and Sampo Luukkainen. "Corrosion Monitoring and Root Cause Identification in High Solids Concentrators." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4395.

Повний текст джерела
Анотація:
Abstract Black liquor high solids (about 80%) concentrators have often been found to suffer from aggressive corrosion. Especially the 1st and 2nd effect bodies are susceptible to corrosion attacks resulting in tube leaks and wall thinning, limiting the availability and lifetime of evaporator lines. Corrosion dynamics and utilized construction materials have been studied extensively within the pulp and paper industry in order to understand the corrosion process. However, it has been challenging to identify root causes for corrosion, which has limited pro-active measures in minimizing corrosion
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Davison, Ralph M., and James D. Redmond. "Development of Qualification Tests for Duplex Stainless Steel Mill Products." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91302.

Повний текст джерела
Анотація:
Abstract The duplex stainless steel, 2205, was evaluated by a series of tests to determine their suitability for detecting the presence of intermetallic compounds which might adversely effect the toughness and other mechanical properties of fabricated duplex stainless steels. A series of 2205 plate samples was aged at 1550°F (845°C) for times up to twenty (20) minutes and evaluated by metallography, by Charpy V-notch impact testing, by ASTM A262 Practices A, B, and C, by modified EPR testing, by cyclic polarization testing, and by modified ASTM G48 testing. Metallographic examination, impact t
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Tsai, Wen-Ta, Kuen-Ming Tsai, and Changjian Lin. "Selective Corrosion in Duplex Stainless Steel." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03398.

Повний текст джерела
Анотація:
Abstract In duplex stainless steel, the two constituent phases, namely ferritic (α) and austenitic (γ) phases, have different crystal structure and chemical composition. They may thus exhibit different corrosion resistances in aqueous environment. In this investigation, an electrochemical technique with spatial resolution was employed to measure the potential difference between these two constituent phases in 2205 duplex stainless steel. Image analyzing techniques were also used to examine the preferential corrosion between α and γ phases. The experimental results showed that ferrite had a hig
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Mahajanam, Sudhakar, Fred Addington, Adarsh Ranganathan, et al. "Cracking of Duplex Stainless Steel in Refining Operations." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11625.

Повний текст джерела
Анотація:
Abstract Duplex stainless steels (DSSs) are complex steels. These materials were originally manufactured to exploit the benefits of high strength and corrosion resistance arising from the duplex microstructure, i.e., ferrite and austenite. However, this very duplex nature can make these steels susceptible to failures commonly observed in both austenitic and ferritic stainless steels. In addition, improper fabrication and welding techniques can lead to the formation of deleterious sigma and chi phases, which can cause brittle failure. In this paper, case studies related to DSS cracking are pres
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wensley, Angela. "Experience with Duplex Stainless Steel Kraft Digesters." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04249.

Повний текст джерела
Анотація:
Abstract Duplex stainless steel has become the preferred material of construction for new kraft digesters, both for reasons of excellent corrosion resistance and cost effectiveness compared with other materials of construction. Most duplex stainless steel digesters have been constructed using UNS S32205 (type 2205) stainless steel due to the greater availability of this material compared with other duplex stainless steel alloys. UNS S32304 (type 2304) duplex stainless steel has slightly superior corrosion resistance and is also a candidate material of construction for new kraft digesters. This
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Fritz, James D., and Ray K. Vermillion. "The Use of Type 2205 (UNS S32205) Duplex Stainless Steel for Pharmaceutical and Bioprocessing Equipment." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10343.

Повний текст джерела
Анотація:
Abstract This paper presents an approach for the testing of an alternate material of construction, Type 2205 (UNS S32205) duplex stainless steel, for use within the biotechnology industry with the results of this testing strategy utilized to justify the first known commercial use of Type 2205 within this industry. The material selection criterion, qualification testing, and service performance of a 75-liter Type 2205 duplex stainless steel research vessel are presented. The corrosion resistance, mechanical properties, electropolishing properties, and rouge resistance of 2205 duplex stainless s
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Chasse, Kevin R., and Preet M. Singh. "Hydrogen Embrittlement of 2205 Duplex Stainless Steel in Synthetic Kraft White Liquor." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10084.

Повний текст джерела
Анотація:
Abstract Duplex stainless steels (DSS) may experience environmental assisted cracking (EAC) under certain conditions in the kraft white liquor solutions used by the pulp and paper industry. Previous work showed that hydrogen absorption is possible in these solutions under applied cathodic potentials (CP) at room temperature, which is a concern because DSSs may become susceptible to hydrogen embrittlement (HE) under certain conditions; however, the effect of a CP on the EAC behavior of DSS in kraft white liquor solutions is currently unknown. Microhardness was used to evaluate the change in har
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zhang, Nai-yan, Zhi Zhang, Wen-tao Zhao, Lian Liu, and Taihe Shi. "Corrosion Evaluation of Tubing Steels and Material Selection in the CO2/H2S Coexistent Environment." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11477.

Повний текст джерела
Анотація:
Abstract In order to evaluate the applicability of the tubing steels, the corrosion behavior and stress corrosion cracking of tubing steels (P110S, P110-13Cr and duplex stainless steel 2205) were investigated under different H2S partial pressures and temperature. The results showed that the duplex stainless steel 2205 had the lowest corrosion rate among three tubing steels; In addition, the corrosion rates of tubing steels increased significantly as the temperature rise, and reached its maximum corrosion rate at 210°C, furthermore, while increasing H2S pressure, the corrosion rate of tubing st
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Duplex Stainless Steel SAE 2205" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії