Готові списки джерел за темами / Eco-Manufacturing

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Eco-Manufacturing"

Автор: Grafiati
Опубліковано: 5 жовтня 2024
Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Eco-Manufacturing".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Eco-Manufacturing"

1

Dimitrov, Roumen. "Promoting eco manufacturing: an Australian case." Journal of Public Affairs 8, no. 4 (2008): 233–47. http://dx.doi.org/10.1002/pa.298.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Meutia, Inten, Marini Ramadhani, and Mohamad Adam. "Does Eco-Efficiency Improve Financial Performance of Manufacturing Companies in Indonesia?" Jurnal Dinamika Akuntansi dan Bisnis 6, no. 2 (2019): 137–50. http://dx.doi.org/10.24815/jdab.v6i2.13785.

Повний текст джерела
Анотація:
This study aims to determine the impact of environmental performance proxied by eco-efficiency on the financial performance of manufacturing companies in Indonesia. İn this study, the multiple linear regression test was used to analyse the data. The sample of this study is manufacturing companies that listed at the Indonesia Stock Exchange from 2012 until 2016 with the total observation is 80 firm-years.The results of this study indicated that the average level of eco-efficiency of the manufacturing companies is still relatively low (0.38). The environmental performance as measured by the eco-
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Singhal, Tejendra Singh, Jinesh Kumar Jain, D. Atchuta Ramacharyulu, et al. "Eco-Design of Products and Processes: A Review on Principles and Tools for Sustainable Manufacturing." E3S Web of Conferences 505 (2024): 01033. http://dx.doi.org/10.1051/e3sconf/202450501033.

Повний текст джерела
Анотація:
Eco-design is a crucial approach in achieving sustainable manufacturing, which seeks to reduce the environmental impact of products and processes throughout their lifecycle. This paper explores the principles and tools that are used in eco-design, providing an overview of the key concepts and methods for sustainable manufacturing. The principles of eco-design are centered on minimizing the environmental impact of products and processes through the use of renewable resources, reducing waste and emissions, and improving energy and material efficiency. The paper discusses these principles in deta
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zulkiffli, Siti Nur ‘Atikah, Nur Farah Zafira Zaidi, Siti Falindah Padlee, and Najahul Kamilah Aminy Sukri. "Eco-Innovation Capabilities and Sustainable Business Performance during the COVID-19 Pandemic." Sustainability 14, no. 13 (2022): 7525. http://dx.doi.org/10.3390/su14137525.

Повний текст джерела
Анотація:
The COVID-19 pandemic has had a direct impact on the manufacturing industry in Malaysia because all economic activities had to be suspended for some time. This study explores the role that eco-innovation capabilities might play in improving sustainable business performance during the ongoing pandemic. This study employs a quantitative method by distributing online questionnaires to 80 small and medium enterprises (SMEs) in Klang Valley, Malaysia. In the study, the relationship between sustainable business performance and the three variables of eco-innovation capabilities, i.e., eco-product inn
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Yang, Qin, and Lin Sun. "Eco-Design in Manufacturing or Remanufacturing? The Sustainable Options in a Closed-Loop Supply Chain with Outsourcing." Sustainability 16, no. 4 (2024): 1633. http://dx.doi.org/10.3390/su16041633.

Повний текст джерела
Анотація:
Here, the authors focused on determining the increase in consumers’ preferences for sustainable products, including that of OEMs, who are responsible for the drop in new product sales. We also assessed the effects of remanufacturing by outsourcing to third-party remanufacturers. However, the outsourcing of remanufacturing not only enables the producer to offer a remanufactured product at the same time as manufacturing new units; it also provides OEMs with the flexibility required to peruse eco-design in manufacturing and/or remanufacturing. For instance, Gree and Midea have heavily invested in
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Khan, Noor Ullah, Ateeq-ur-Rehman Irshad, Adeel Ahmed, and Amira Khattak. "Do organizational citizenship behavior for the environment predict triple bottom line performance in manufacturing firms?" Business Process Management Journal 27, no. 4 (2021): 1033–53. http://dx.doi.org/10.1108/bpmj-01-2021-0007.

Повний текст джерела
Анотація:
PurposeOrganizational citizenship behavior for the environment (OCBE) is vital for manufacturing firms' ability to improve their triple bottom line (TBL) performance. This study's objective was to examine the direct relationship between three OCBE key dimensions, i.e. eco-initiatives (EIs), eco-civic-initiatives and eco-helping (EH) and TBL performance, i.e. economic (ECOP), social (SOP) and environmental (ENP).Design/methodology/approachThe quantitative design was used based on the positivist approach. A sample of 350 manufacturing firms was targeted using random probability sampling via a su
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Abdullah, Ziyad Tariq, Guo Shunsheng, and Sheng Buyun. "Eco-Design Application to Drive Sustainable Manufacturing." Advanced Science Letters 21, no. 12 (2015): 3610–14. http://dx.doi.org/10.1166/asl.2015.6561.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sun, Mei, Ying Ru, Chun Xiao Li, and Yong Chao Sun. "Proposal of Eco Design for Chinese Manufacturing." Applied Mechanics and Materials 496-500 (January 2014): 2707–10. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.2707.

Повний текст джерела
Анотація:
Export value took more than half of GDP in average from 2007 to 2011. In recent years, Nations issued a large amount of environment standards; as a result, Chinese exported products suffered recall in main target nation of export because product did not meet requirement of eco-design. In China, small and medium-sized enterprises took more than half of total enterprise in manufacturing. For small and medium-sized enterprises, it is difficult to know well about all environment standards in world. This paper draw proposal for the development of Chinese manufacturing.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gutowski, Timothy G. "The efficiency and eco-efficiency of manufacturing." International Journal of Nanomanufacturing 6, no. 1/2/3/4 (2010): 38. http://dx.doi.org/10.1504/ijnm.2010.034770.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Horta, J. F., F. J. P. Simões, and A. Mateus. "Large scale additive manufacturing of eco-composites." International Journal of Material Forming 11, no. 3 (2017): 375–80. http://dx.doi.org/10.1007/s12289-017-1364-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Eco-Manufacturing"

1

Litos, Lampros. "Design support for eco-efficiency improvements in manufacturing." Thesis, University of Cambridge, 2016. https://www.repository.cam.ac.uk/handle/1810/264946.

Повний текст джерела
Анотація:
Eco-efficiency improvements in manufacturing is a controversial subject for researchers, practitioners as well as policy makers. The widely accepted definition of "doing more with less" is not accurate enough to guide the design of improvements that can deliver products in a sustainable way. The outcome of these challenges is evident through significant environmental performance variations across various levels of manufacturing operations. The study is driven by the complexity of manufacturing systems and sought to offer design support for practitioners that aim to improve eco-efficiency. A ma
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Jansson, Christoffer, and Catrin Carlberg. "Barriers to Eco-innovation : A Qualitative Study on Large Manufacturing Companies." Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388461.

Повний текст джерела
Анотація:
Over the last decades the concept of eco-innovation has increased its relevance among academics, practitioners and policy makers. The majority of prior literature has concerned eco-innovations and their drivers. Research concerning the barriers to eco-innovation is however scarce, especially among large companies. The purpose with this thesis is therefore to extract further information regarding the field of the barriers to eco-innovation. The aim is to contribute with enhanced knowledge and expand the current literature, as focus is placed on large companies and their barriers. This has been
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Cook, Matthew Brian. "The transfer and application of the eco-service concept in UK manufacturing companies : an exploratory study." Thesis, Cranfield University, 2002. http://dspace.lib.cranfield.ac.uk/handle/1826/10570.

Повний текст джерела
Анотація:
Increasingly, services are utilised by manufacturing companies to satisfy demand. This trend is thought by a number of authors to provide opportunities to develop products that satisfy demand at increased resource efficiencies. This thesis considers a special category of services which have been conceptualised by academics and policy makers to realise this - Eco-services Eco-services have been the focus of a number of research projects lead by those practicing and associated with cleaner product design. This work has mainly focused on product policy and whilst a considerable body of knowledge
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bloch, Pierre-Yves. "Industrialisation de la production d'une innovation technologique avec un potentiel gain environnemental important : application aux cellules bio-enzymatiques." Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALI039.

Повний текст джерела
Анотація:
L'industrialisation d'un produit de rupture dans le contexte spécifique d'une startup Deeptech est difficile, stressante et risquée. Elle nécessite un processus bien structuré, aligné sur la R&D du produit et le développement des procédés, le développement de la startup elle-même, et le développement ou l'adaptation d'outils et de méthodes spécifiques. Cette thèse aborde la question de l'industrialisation et de la mise à l'échelle de la production d'un produit innovant avec des objectifs de durabilité ambitieux. Une startup se distingue par ses ressources limitées qui se développent rapide
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lennan, Maria Laura Ferranty Mac. "Determinantes estratégicos de ecoeficiências de empresas chinesas no Brasil." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/12/12139/tde-03022017-104308/.

Повний текст джерела
Анотація:
Preocupações com sustentabilidade ambiental são recorrentes tanto no meio acadêmico, como no meio empresarial. Elas ecoam ao se pensar no crescimento econômico chinês e nos impactos das atividades produtivas no meio ambiente. A China é o país emergente com as maiores taxas de crescimento econômico no mundo, porém sua imagem também reflete sua vulnerabilidade com relação à ecologia. Tendo isso em consideração e procurando compreender como isso repercute nas operações internacionais, esta tese estuda os determinantes estratégicos das empresas chinesas em operação no Brasil, pelas lentes teóricas
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Endresen, Fredrik Vihovde. "Electric Motor Development for Shell Eco-Marathon : Manufacturing an ironless axial flux permanent magnet Motor with Hallbach array and Development of existing Motor for the Shell Eco-Marathon Competition." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19021.

Повний текст джерела
Анотація:
This thesis describes the process of making a new engine for the car DNV Fuel Fighter 2 that participated in the Shell Eco-Marathon Europe 2012 in Rotterdam. The decision was made to construct a new engine based on an optimized design by Lubna Nasrin. The engine is an ironless axial flux permanent magnet machine with Hallbach array. As a contingency plan there was the possibility to modify the engine used in 2010 and 2011 built by André Dahl-Jacobsen. The result of the process is that the new engine is operational and it has displayed an efficiency of 68 %. However the old engine has disp
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Woolman, Tim. "Eco-product innovation and clean manufacturing technologies : designing support services for small and medium sized enterprises : innovation report." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/42210/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Yi, Li [Verfasser], Jan C. [Akademischer Betreuer] Aurich, and Bahram [Akademischer Betreuer] Ravani. "Eco-Design for Additive Manufacturing Using Energy Performance Quantification and Assessment / Li Yi ; Jan C. Aurich, Bahram Ravani." Kaiserslautern : Technische Universität Kaiserslautern, 2021. http://d-nb.info/1238074480/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

BATTISTONI, CHIARA. "Systemic Design for local circular economies: designing ecosystems to boost systemic innovation in the manufacturing sector. From the theoretical framework to the practical application." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2861332.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Nanto, Darack B. "THE ECO-SMART CAN V2.0." Digital Commons @ East Tennessee State University, 2018. https://dc.etsu.edu/asrf/2018/schedule/39.

Повний текст джерела
Анотація:
I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT)
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Eco-Manufacturing"

1

Schmidt, Christopher. Planning of Eco-efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62953-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Schmidt, Christopher. Planning of Eco-efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65890-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ambs, Pierre. SPIE eco-photonics 2011: Sustainable design, manufacturing, and engineering workforce education for a green future : 28-30 March 2011, Strasbourg, France. Edited by SPIE (Society). SPIE, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

International Seminar on Life Cycle Engineering (3rd 1996 Zürich, Switzerland). ECO-performance '96: Presentations at the 3rd International Seminar on Life Cycle Engineering : ETH Zürich, Switzerland, March 18-20, 1996. Verlag Industrielle Organisation, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Rothery, Brian. BS 7750: Implementing the Environment Management Standard and the EC Eco-Management Scheme. Gower, 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Schmidt, Christopher. Planning of Eco-Efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing AG, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Kumar, Harish, Kaliyan Mathiyazhagan, K. E. K. Vimal, Anbanandam Ramesh, and Vernika Agarwal. Lean and Green Manufacturing: Towards Eco-Efficiency and Business Performance. Springer Singapore Pte. Limited, 2021.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Schmidt, Christopher. Planning of Eco-Efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing AG, 2021.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lean and Green Manufacturing: Towards Eco-Efficiency and Business Performance. Springer, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Godana, Nigussie. Identifying Weak Points of Existing Supply Chain and Their Impact on Competitiveness. a Study of the Ethiopian Apparel Manufacturing Eco-System. GRIN Verlag GmbH, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Eco-Manufacturing"

1

Li, Wen. "Eco-efficiency of Manufacturing Processes." In Sustainable Production, Life Cycle Engineering and Management. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17365-8_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kim, Beom Seok, Kyung Hye Park, and Byung Chun Kim. "Information systems for eco-effective manufacturing." In Intelligent Systems for Manufacturing. Springer US, 1998. http://dx.doi.org/10.1007/978-0-387-35390-6_33.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Boret Cordoba, Denis, and Alireza Veshagh. "Managing Eco Design and Sustainable Manufacturing." In Re-engineering Manufacturing for Sustainability. Springer Singapore, 2013. http://dx.doi.org/10.1007/978-981-4451-48-2_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Mishima, Nozomu. "Sustainable Production: Eco-efficiency of Manufacturing Process." In Handbook of Sustainable Engineering. Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-1-4020-8939-8_41.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Spirko, Martin, Daniela Spirkova, Dagmar Caganova, and Manan Bawa. "Eco-Innovation in Manufacturing Process in Automotive Industry." In Smart City 360°. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33681-7_44.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ullah, A. M. M. Sharif, Hiroyuki Hashimoto, Fumiya Hayashi, et al. "Comparison between Wooden and Conventional Prototyping:An Eco-Manufacturing Perspective." In Design for Innovative Value Towards a Sustainable Society. Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-3010-6_179.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Popoola, Olufemi Adebola, and Grace Oluwatofunmi Popoola. "Drivers of Eco-Innovation Among Manufacturing Firms in Nigeria." In Sustainable Development Goals Series. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-46293-1_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ispara Xavier, S., R. Divahar, P. S. Aravind Raj, P. J. Adarsh, Akshay Manoj, and Badusha Jalal. "Manufacturing of Eco-Friendly Brick Using Wasted Textile Apparel." In 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023). Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49826-8_19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kishore, R., R. Pradeep, Suyash Roy, et al. "Eco-Efficiency and Business Performance Evaluation—Lean and Green Manufacturing Approach." In Intelligent Manufacturing and Energy Sustainability. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4443-3_75.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Veshagh, Alireza, Salvador Marval, and Tim Woolman. "Making the Business Case for Eco-Design and Sustainable Manufacturing." In Leveraging Technology for a Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29069-5_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Eco-Manufacturing"

1

Magnaval, Gabriel, Tristan Debonnet, and Manuele Margni. "Integrated LCA and Eco-design Process for Hydrogen Technologies: Case Study of the Solid Oxide Electrolyser." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.171756.

Повний текст джерела
Анотація:
The Life Cycle Assessment (LCA) of a solid oxide electrolyser (SOE) has been performed using publicly available data. The system for producing 1 kg of hydrogen at 25bar and 99.9% purity is represented by a modular structure, which includes the 20-kW solid oxide stack manufacturing, balance of plant equipment, operation consumables, and end-of-life processes. A parametrized life cycle inventory modeling approach was developed. The results illustrate that SOE performs better than steam methane reforming only if supplied by electricity from renewable or nuclear sources. The operation consumables
Стилі APA, Harvard, Vancouver, ISO та ін.
2

VIVAR, Indra CASTRO, Catherine AZZARO-PANTEL, Alberto A. AGUILAR LASSERRE, and Fernando MORALES-MENDOZA. "Eco-Designing Pharmaceutical Supply Chains: A Process Engineering Approach to Life Cycle Inventory Generation." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.185378.

Повний текст джерела
Анотація:
The environmental impacts of pharmaceutical production underscore the need for comprehensive life cycle assessments (LCAs). Offshoring manufacturing, a common cost-saving strategy in the pharmaceutical industry, increases supply chain complexity and reliance on countries like India and China for active pharmaceutical ingredients (APIs). The COVID-19 pandemic exposed Europe�s vulnerability to global crises, prompting initiatives such as the French government�s re-industrialization plan to relocate the production of fifty critical drugs. Paracetamol production has been prioritized, with recent s
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mabel Rani, A. Jaya, Sujatha S, S. Karkuzhali, Jai Ganesh B, V. Samuthira Pandi, and Shobana D. "Industrial Internet of Things Energy Efficiency: Investigating Low-Power Communication Protocols and Eco-Friendly Data Management in Manufacturing Settings." In 2025 International Conference on Emerging Smart Computing and Informatics (ESCI). IEEE, 2025. https://doi.org/10.1109/esci63694.2025.10988187.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Nouman, Muhammad, Maria Kanwal, Muhammad Sami Ullah, and Syed Abdullah Mansoor. "Sustainable Tire Waste Biochar Additives for Enhancing Concrete Strength and Eco-Efficiency." In 14th International Civil Engineering Conference. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-w2wlri.

Повний текст джерела
Анотація:
This study checks the practicality of incorporating Waste Tire Biochar (WTBC) during the manufacturing process of concrete as an eco-friendly new option. The study focuses on the effect of mechanical properties and the carbon footprint due to the use of the biochar on traditional concrete. Environmental Impact Assessment (EIA) data demonstrates that the substitution of 1% of cement with WTBC leads to the reduction of CO2 emissions by 1%. On the other hand, 7% replacement, a whopping 7% reduction in CO2 emissions is realized. This means that there is a significant reduction from 291.15 kg/m³ of
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lopes, Lucas, Harish Daruari, Manuela Almeida, Florindo Gaspar, and Paulo Mendonca. "Closing the Loop of Circularity by Harnessing Additive Manufacturing to Reuse, Recycle and Reintroduce Marine Plastic Waste Back into the Built Environment." In 2024 10th International Conference on Architecture, Materials and Construction & 2024 5th International Conference on Building Science, Technology and Sustainability. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-kptjg4.

Повний текст джерела
Анотація:
The amount of marine plastic litter in the ocean poses a major threat to the environment, especially coastal communities. High-Density Polyethylene (HDPE), a durable plastic widely used in marine applications like fishing lines, nets, and mooring cables, is a significant contributor to marine pollution. This research explores the potential of repurposing maritime activity-derived HDPE waste for use in the Architecture, Engineering and Construction (AEC) industries through additive manufacturing technologies, such as 3D printing. The study also researches the source of the waste, detailing the
Стилі APA, Harvard, Vancouver, ISO та ін.
6

LI, Shaqi. "Innovative interactive design of eco-friendly digitalwater lanterns based on emotional data." In 3rd International Conference on Advanced Manufacturing Technology and Manufacturing Systems (ICAMTMS 2024), edited by Dailin Zhang and Ke Zhang. SPIE, 2024. http://dx.doi.org/10.1117/12.3039659.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Tanaka, K., T. Katayama, and K. Uno. "Eco-efficient manufacturing process for fibre reinforced thermoplastic." In HPSM 2008. WIT Press, 2008. http://dx.doi.org/10.2495/hpsm080221.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Okazaki, H., and K. Kaneko. "Eco-design of pumps in manufacturing and their use." In Proceedings First International Symposium on Environmentally Conscious Design and Inverse Manufacturing. IEEE, 1999. http://dx.doi.org/10.1109/ecodim.1999.747648.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Jha, Anish Kumar, and Shilpa Pankaj Kewate. "Manufacturing of Eco Bricks: A Sustainable Solution for Construction." In The 5th International Conference on Innovative Product Design and Intelligent Manufacturing Systems. MDPI, 2024. http://dx.doi.org/10.3390/engproc2024066028.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kumaresh, M., N. Rajesh Jesudoss Hynes, and R. Sankaranarayanan. "Eco-friendly glycol based nano cutting fluids for manufacturing sectors." In 3RD INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC-2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0001246.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Eco-Manufacturing"

1

Zhang, Jinwen, Baoming Zhao, Tuan Liu, et al. Upcycling of CFRP Waste: Viable Eco-friendly Chemical Recycling and Manufacturing of Novel Repairable and Recyclable Composites. Office of Scientific and Technical Information (OSTI), 2025. https://doi.org/10.2172/2511313.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Menendez, A., M. Coello, J. Suarez, et al. Processability and mechanical properties of spent coffee ground (SCG) and polypropylene biocomposites. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.bbb.5.

Повний текст джерела
Анотація:
The circular economy encourages optimizing use of plastics, waste reduction, sustainable materials, and processing of plastic products. In this framework, the use of agricultural waste materials promotes waste reduction and eco-design in plastic product manufacturing. This study researched the preparation of an isotatic polypropylene (PP) matrix (MFI 50 grade) with spent coffee grounds (SCG) and various commercial additives. The biocomposites were analyzed to evaluate their mechanical properties and processability. PP and SCG composites were synthesized with 30% SCG content with maleic anhydri
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Eco-Manufacturing" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії