Увійти

Готові списки джерел за темами / Eco-Manufacturing / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Eco-Manufacturing.

Дисертації з теми "Eco-Manufacturing"

Автор: Grafiati

Опубліковано: 5 жовтня 2024

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-32 дисертацій для дослідження на тему "Eco-Manufacturing".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Litos, Lampros. "Design support for eco-efficiency improvements in manufacturing." Thesis, University of Cambridge, 2016. https://www.repository.cam.ac.uk/handle/1810/264946.

Повний текст джерела

Анотація:

Eco-efficiency improvements in manufacturing is a controversial subject for researchers, practitioners as well as policy makers. The widely accepted definition of "doing more with less" is not accurate enough to guide the design of improvements that can deliver products in a sustainable way. The outcome of these challenges is evident through significant environmental performance variations across various levels of manufacturing operations. The study is driven by the complexity of manufacturing systems and sought to offer design support for practitioners that aim to improve eco-efficiency. A ma

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Jansson, Christoffer, and Catrin Carlberg. "Barriers to Eco-innovation : A Qualitative Study on Large Manufacturing Companies." Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388461.

Повний текст джерела

Анотація:

Over the last decades the concept of eco-innovation has increased its relevance among academics, practitioners and policy makers. The majority of prior literature has concerned eco-innovations and their drivers. Research concerning the barriers to eco-innovation is however scarce, especially among large companies. The purpose with this thesis is therefore to extract further information regarding the field of the barriers to eco-innovation. The aim is to contribute with enhanced knowledge and expand the current literature, as focus is placed on large companies and their barriers. This has been

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Cook, Matthew Brian. "The transfer and application of the eco-service concept in UK manufacturing companies : an exploratory study." Thesis, Cranfield University, 2002. http://dspace.lib.cranfield.ac.uk/handle/1826/10570.

Повний текст джерела

Анотація:

Increasingly, services are utilised by manufacturing companies to satisfy demand. This trend is thought by a number of authors to provide opportunities to develop products that satisfy demand at increased resource efficiencies. This thesis considers a special category of services which have been conceptualised by academics and policy makers to realise this - Eco-services Eco-services have been the focus of a number of research projects lead by those practicing and associated with cleaner product design. This work has mainly focused on product policy and whilst a considerable body of knowledge

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Bloch, Pierre-Yves. "Industrialisation de la production d'une innovation technologique avec un potentiel gain environnemental important : application aux cellules bio-enzymatiques." Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALI039.

Повний текст джерела

Анотація:

L'industrialisation d'un produit de rupture dans le contexte spécifique d'une startup Deeptech est difficile, stressante et risquée. Elle nécessite un processus bien structuré, aligné sur la R&D du produit et le développement des procédés, le développement de la startup elle-même, et le développement ou l'adaptation d'outils et de méthodes spécifiques. Cette thèse aborde la question de l'industrialisation et de la mise à l'échelle de la production d'un produit innovant avec des objectifs de durabilité ambitieux. Une startup se distingue par ses ressources limitées qui se développent rapide

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Lennan, Maria Laura Ferranty Mac. "Determinantes estratégicos de ecoeficiências de empresas chinesas no Brasil." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/12/12139/tde-03022017-104308/.

Повний текст джерела

Анотація:

Preocupações com sustentabilidade ambiental são recorrentes tanto no meio acadêmico, como no meio empresarial. Elas ecoam ao se pensar no crescimento econômico chinês e nos impactos das atividades produtivas no meio ambiente. A China é o país emergente com as maiores taxas de crescimento econômico no mundo, porém sua imagem também reflete sua vulnerabilidade com relação à ecologia. Tendo isso em consideração e procurando compreender como isso repercute nas operações internacionais, esta tese estuda os determinantes estratégicos das empresas chinesas em operação no Brasil, pelas lentes teóricas

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Endresen, Fredrik Vihovde. "Electric Motor Development for Shell Eco-Marathon : Manufacturing an ironless axial flux permanent magnet Motor with Hallbach array and Development of existing Motor for the Shell Eco-Marathon Competition." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19021.

Повний текст джерела

Анотація:

This thesis describes the process of making a new engine for the car DNV Fuel Fighter 2 that participated in the Shell Eco-Marathon Europe 2012 in Rotterdam. The decision was made to construct a new engine based on an optimized design by Lubna Nasrin. The engine is an ironless axial flux permanent magnet machine with Hallbach array. As a contingency plan there was the possibility to modify the engine used in 2010 and 2011 built by André Dahl-Jacobsen. The result of the process is that the new engine is operational and it has displayed an efficiency of 68 %. However the old engine has disp

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Woolman, Tim. "Eco-product innovation and clean manufacturing technologies : designing support services for small and medium sized enterprises : innovation report." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/42210/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Yi, Li [Verfasser], Jan C. [Akademischer Betreuer] Aurich, and Bahram [Akademischer Betreuer] Ravani. "Eco-Design for Additive Manufacturing Using Energy Performance Quantification and Assessment / Li Yi ; Jan C. Aurich, Bahram Ravani." Kaiserslautern : Technische Universität Kaiserslautern, 2021. http://d-nb.info/1238074480/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

BATTISTONI, CHIARA. "Systemic Design for local circular economies: designing ecosystems to boost systemic innovation in the manufacturing sector. From the theoretical framework to the practical application." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2861332.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Nanto, Darack B. "THE ECO-SMART CAN V2.0." Digital Commons @ East Tennessee State University, 2018. https://dc.etsu.edu/asrf/2018/schedule/39.

Повний текст джерела

Анотація:

I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT)

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Sow, Moustapha. "Réalisation d'éco-ciments par la valorisation de cendres volantes de charbon non conventionnelles issues de centrales thermiques Spreader Stoker." Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30354/document.

Повний текст джерела

Анотація:

L'objectif principal de cette thèse a été d'évaluer le potentiel de valorisation des cendres volantes de charbon issues de centrales thermiques Spreader Stoker (Cendres Volantes Spreader Stoker), dans la fabrication d'éco-ciments sur l'île de La Réunion. Nous avons dans un premier temps effectué une caractérisation physico-chimique des CVSS et vérifié leur réactivité. Deux voies de valorisation ont ensuite été retenues, l'une qui ne présente pas de valeur ajoutée mais qui permet de valoriser un volume important de CVSS par une stabilisation dans des matrices à base de ciment, l'autre qui offre

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Baudry, Ingwild. "Caractérisation des process de fabrication microélectroniques pour l'éco-conception des futures technologies." Phd thesis, Université de Grenoble, 2013. http://tel.archives-ouvertes.fr/tel-00957329.

Повний текст джерела

Анотація:

L'industrie microélectronique est engagée depuis longtemps dans des mesures visant à réduire ses impacts sur l'environnement, et ce sur toutes les phases du cycle de vie de ses produits. Sur les sites de fabrication, la suite logique à la mise en place de système de traitement des pollutions est l'anticipation de ces dernières. L'éco-conception des technologies microélectroniques, c'est-à-dire l'intégration de paramètres environnementaux dans leur processus de développement, permet de répondre à cet objectif. Notre travail de recherche a pour but de caractériser environnementalement les procéd

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Hassine, Hichem. "Modélisation, simulation et optimisation pour l'éco-fabrication." Thesis, Châtenay-Malabry, Ecole centrale de Paris, 2015. http://www.theses.fr/2015ECAP0016/document.

Повний текст джерела

Анотація:

Cette thèse se focalise sur la proposition et l’application des approches pour la modélisation de l’éco-fabrication. Ces approches permettent de préparer et simuler une démarche de fabrication des produits en assurant le couplage entre les objectifs écologiques et économiques.Les approches développées dans cette thèse sont basées sur les notions d’aide à la décision ainsi que l’optimisation multi objectifs. L’aide à la décision permet l’intervention en deux différents niveaux : le choix des impacts environnementaux à quantifier ainsi que le choix du scénario final de fabrication. Pour l’optimi

Стилі APA, Harvard, Vancouver, ISO та ін.

14

LODI, Chiara. "International trade, eco-innovation and pollution emissions: theoretical and empirical analysis at firm and country level." Doctoral thesis, Università degli studi di Ferrara, 2019. http://hdl.handle.net/11392/2478810.

Повний текст джерела

Анотація:

Fin dagli inizi degli anni ’90, il deterioramento ambientale ha ricevuto un’attenzione sempre maggiore ed è diventato uno dei problemi più dibattuti a livello internazionale. Grossi passi avanti sono stati fatti in quanto gli effetti negativi sulla salute umana e sulla sopravvivenza degli ecosistemi sono scientificamente accertati. Considerando questo scenario, le autorità internazionali si stanno coordinando per porre in essere delle politiche che promuovano uno sviluppo sostenibile, attraverso un utilizzo più efficiente delle risorse naturali e una riduzione delle emissioni. Tale proces

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Welter, Loïc. "Contribution à l'amélioration de l'observabilité et de la reproductibilité des défauts dans les dispositifs semi-conducteurs." Thesis, Aix-Marseille, 2014. http://www.theses.fr/2014AIXM4776.

Повний текст джерела

Анотація:

Les défauts récurrents apparaissant dans des contextes particuliers ont un impact non négligeable sur le rendement, lors de la fabrication des noeuds technologiques nanométriques. C'est pourquoi une nouvelle méthode de contrôle du procédé de fabrication in-situ est développée, en vue d'améliorer la performance globale de l'outil de production. Elle se veut complémentaire des techniques d'analyses de défaillance classique, notamment en cas de crise. Le principe est de transformer un circuit de production en un véhicule de test en réutilisant des éléments qui le composent. Le circuit perd alors

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Reap, John J. "Plants in the garden an approach to modeling the impact of industrial activities in ecosystems /." Thesis, Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-04082004-201301/unrestricted/reap%5Fjohn%5Fj%5F200405%5Fmast.pdf.

Повний текст джерела

Анотація:

Thesis (M.S.)--Mechanical Engineering, Georgia Institute of Technology, 2004.<br>Matthew J. Realff, Committee Member ; Farrokh Mistree, Committee Member ; Berdinus A. Bras, Committee Chair. Includes bibliographical references (leaves 191-195).

Стилі APA, Harvard, Vancouver, ISO та ін.

17

El-Gomla, Randa A. M. "A plan-do-check-act framework for WEEE and RoHS : a model for implementing WEEE and RoHS by integrating eco-design factors and activities into business operation and strategy." Thesis, University of Bradford, 2011. http://hdl.handle.net/10454/5432.

Повний текст джерела

Анотація:

Eco-design is relatively new and fast growing field of research due to its vital importance to the manufacturing industry and its related environmental issues such as reducing waste, and CO2 emission. A major EU programme relating to the environment is the waste of Electrical and Electronic Equipment (WEEE) directive. The (WEEE) directive specifies ten categories and a voltage range which is up to 1.000 volts AC or 1.500volts DC. The developed framework came for the implementation of Eco-design principles that helps to take into account the adaption of the (WEEE) directive and the restriction

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Puangnakpan, Niyada. "An investigation of Eco-Innovation in household refrigerator industry : A Comparative study of Electrolux (Sweden) and Toshiba Consumer Products (Thailand)." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-12868.

Повний текст джерела

Анотація:

Purpose: The main purpose is to investigate how the two companies in a cross-national context pursue innovation particularly in the process of achieving eco-innovations practices in manufacturing operation Method: An in-depth interviewing approach was used conducting a face-to-face interview and an online video conference. Research question: " What are the key differences in the process of achieving eco-innovations in the production systems between two household refrigerator manufacturing companies in a cross-national context? " Sub-questions: 1. Why do the companies pursue eco-innovations?

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Jonsson, Fredrik. "Product Related Environmental Work in Small and Medium Sized Enterprises in Thailand, Developing and Manufacturing Electrical and Electronic Products." Thesis, Linköping University, Department of Management and Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8828.

Повний текст джерела

Анотація:

<p>Small and Medium Sized Enterprises (SMEs) in Thailand that develop and manufacture electrical and electronic products are among other SMEs in the world meeting increasingly stringent legal and customer requirements related to environmental issues. Obstacles for the SMEs around the world to meet these requirements are almost the same in form of lack of knowledge, budget and resources. The differences between SMEs in Thailand and SMEs in the EU, Japan or even Korea are that these countries have been developed the eco-design concept and SMEs have been involved in eco-design activities for many

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Hoang, Vinh Hien. "Analysis of the Existing Fashion Retail Concepts and its Coming Trends." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-114363.

Повний текст джерела

Анотація:

The increase of trading has created many environmental, ecological, social and ethical problems. The main concern across all industries is to create more sustainable, eco-friendly and ethical manufacturing processes. Only by influence consumer's purchasing behavior there might be the demand for eco-green products. The fashion and textile industry as one of the main contributor to the world's economy is one of the main environmental polluter (e.g.: soil, lakes, river and air). Recently, many young fashion designers started to offer eco-green fashion to the market. This new phenomenon might chan

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Helldal, Michael, and Sofia Tenne. "Positiva miljöeffekter i kölvattnet av Lean produktion : Kan en integrering av miljöaspekter och Lean produktion bidra till att nå synergieffekter och minska risken för suboptimering?" Thesis, Linköping University, Linköping University, Department of Management and Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-17649.

Повний текст джерела

Анотація:

<p>Denna rapport är resultatet av ett examensarbete utfört vid Institutionen för industriell och ekonomisk utveckling vid Linköpings universitet på uppdrag av konsultbolaget Sustainia AB. Lean produktion, ofta benämnt Lean, har det senaste decenniet blivit en allt mer attraktiv produktionsfilosofi för att minska kostnader och öka kundnöjdhet genom förbättrad leveransservice och effektivare flöde. Ett flertal författare har påpekat att införandet av Lean direkt kan förbättra ett företags miljöprestanda, främst till följd av det minskade slöseri som Lean avser ge upphov till. Vidare finns studie

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Lin, Yu-Hong, and 林育鴻. "A Study of Manufacturing Eco-Cement." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/26079648060994141948.

Повний текст джерела

Анотація:

碩士<br>國立雲林科技大學<br>營建工程系碩士班<br>94<br>Due to the improvement of living standard, municipal waste has been increasing dramatically in the recent years. The government of Taiwan is promoting the use of incinerators to reduce the volume of wastes. However, the incinerated ashes have been becoming one of the environmental issues due to the shortage of land supply. Therefore recycling and reuse of incinerated ashes is now an urgent issue to be tackled. In this study, incinerated fly ashes and bottom ashes were been used as raw materials in producing so called Eco-Cement by high temperature oven. In t

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Huang, Shlh-Te, and 黃世德. "The Study of Eco-efficiency in Optical Element Manufacturing Plants." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/04337885528390078659.

Повний текст джерела

Анотація:

碩士<br>朝陽科技大學<br>環境工程與管理系碩士班<br>93<br>In recent years, a roaring markets in the digital camera ,image mobile, and projector products bloomed a vigorous development of relative industries. An optical lens becomes the most important component in these products. The photo-electricity or image products contain different components to function well, which they should be. In Taiwan, the optics components will play the most important role in the development of digital camera, image mobile and projector-related industries. However, should we think about the influence of the environment at the same time

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Cheng, Shu-Yun, and 鄭淑澐. "The Study of Eco-efficiency in the STN-LCD Manufacturing Plants." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/5kns2x.

Повний текст джерела

Анотація:

碩士<br>朝陽科技大學<br>環境工程與管理系碩士班<br>94<br>This study adapted the concept of life cycle assessment and investigated the environmental impacts associated with the STN-LCD manufacturing. It focused on the inventory of the raw material usage, electricity, water quantity, as well as the emission of pollutants during the manufacturing of STN-LCD products. The data, then, input into the models of Simapro 5.0 and Eco-indicator 99 to simulate the degree of impacts from the cradle to gate of the STN-LCD manufacturing. The results showed that in the gray STN-LCD production the impact scores are 0.026, 2.58, a

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Ameri, Ehsan. "Robust design and manufacturing of unidirectional hybrid flax-paper eco-composites." Thèse, 2016. http://constellation.uqac.ca/4053/1/Ameri_uqac_0862D_10241.pdf.

Повний текст джерела

Анотація:

Canada is the world's largest producer of flax. However, most of the flax fibers are used either for food production or to weave into clothing and blankets. So, by developing rein-forcements of flax fibers to be used in polymeric composites, there is an opportunity to not only produce value-added products, but also be more environmentally friendly. Flax fibers are characterized by a higher specific stiffness (stiffness divided by density) than glass fibers and therefore can be considered as a potential replacement of glass fiber in composite parts. In order to develop flax fiber composites tha

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Ko, Jia-Fu, and 柯家富. "Effects of ISO 14000 Eco-labels on Efficiency of Taiwan's Manufacturing Firms." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/53639137723835862030.

Повний текст джерела

Анотація:

碩士<br>國立交通大學<br>經營管理研究所<br>92<br>The topic of global environmental protection is paid attention to day by day, since the leader all around the world signed Rio Declaration and Implementing 21 Agenda together in Brazil Rio Earth Summit of Rio de Janeiro in 1992. The environmental consciousness of the height makes the entrepreneur expect to undertake the responsibility of environmental protection. In the global investigation at the end of 2002, the total amount of enterprises in Taiwan that have already obtained ISO 14000 environmental administrative system authentication rank the 15th in the wh

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Gabriel, Bárbara Filipa Casqueira Coelho. "Support tool for the application of nanoengineering on the development of eco-efficient manufacturing processes." Doctoral thesis, 2017. http://hdl.handle.net/10773/29111.

Повний текст джерела

Анотація:

The aim of this work is to present the NanoTechnology Usability (NTU) index tool, created and developed in order to reduce the gap between nanotechnologybased products developed in R & D centers and their effective application and utilization, promoting the optimized selection of materials and the use of ecoefficient production techniques. In this sense, the doctoral work contextualizes the current market of the types of commercially available nanomaterials, the most used synthesis methods, their current and potential market applications, current standards, obstacles and uncertainties with r

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Wu, Chieh-Yu, and 吳介渝. "Sustainable Product Design for Eco-innovation and Green Manufacturing: The Case of TFT-LCD Panel Development." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/36648148459463331268.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

陳進田. "Using Ecological Footprint Method and DEA to study the manufacturing industry''s eco-efficiency and production efficiency." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/54509076810019060248.

Повний текст джерела

Анотація:

碩士<br>長庚大學<br>企業管理研究所<br>89<br>Although the development of manufacturing industry has made the great contributions to Taiwan’s economy, it has also made significant impact on Taiwan’s nature environment. This research uses both the Ecological Footprint Method and DEA （Data Envelopment Analysis） Method to measure the ecological footprint, Eco-efficiency and production efficiency for Taiwan’s manufacturing industry. It not only estimates the impact on Taiwan’s nature environment resulting from industrial development but also compare, among each sector of the manufacturing industry, the relative

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Sreenivasan, Rameshwar. "Sustainability and thermal aspects of polymer based laser sintering." Thesis, 2010. http://hdl.handle.net/2152/ETD-UT-2010-12-2374.

Повний текст джерела

Анотація:

Additive Manufacturing (AM) processes which include Selective Laser Sintering (SLS) have experienced tremendous growth and development since their introduction over 20 years ago. It becomes highly important at this stage to evaluate the sustainability of the process and refine it to reduce energy and material consumption. In this study, a sustainability analysis was performed on the SLS process with Nylon-12 using the Environmental and Resource Management Data (ERMD) known as Eco-Indicators. The energy perspective alone was considered and a Total Energy Indicator (TEI) value was calculated usi

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Helldal, Michael, Sofia Tenne, and Mattias Lindahl. "Environmental benefits riding the coattails of lean production : can an integration of environmental aspects and lean production result in synergies and a reduced risk of sub-opimisation." 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-51290.

Повний текст джерела

Анотація:

The purpose of this study was to investigate how work with Lean and environmental aspects affect one another, and if possible and beneficial from a business point-of-view, how they could be integrated into a single model. It was found that several of the fundamental concepts concerning Lean and environmental aspects support one another. Further, Lean has the potential to improve the environmental performance of a company, and can contributeto the environmental work by its proactive approach, structured way of operating and long-term way of thinking. The environmental perspective can contribute

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Acharya, Shakuntala. "Supporting Environmentally-benign Design at Conceptual Stage." Thesis, 2019. https://etd.iisc.ac.in/handle/2005/5079.

Повний текст джерела

Анотація:

An ‘environmentally-benign design’ is defined as that which causes little or no harm to the natural environment and may be achieved by reducing the environmental impact of the design solutions conceptualised, to be eventually embodied into a product. During the early stages of design, iterative design activities of generation, evaluation, modification and selection are performed to affirm alternatives to a design solution from several fragmented and highly abstract ideas. Thus, the designer takes critical decisions with respect to the various criteria, such as, cost, aesthetics, ergonomics

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!