Увійти

Готові списки джерел за темами / Eco-Manufacturing / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Eco-Manufacturing.

Статті в журналах з теми "Eco-Manufacturing"

Автор: Grafiati

Опубліковано: 5 жовтня 2024

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Eco-Manufacturing".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Dimitrov, Roumen. "Promoting eco manufacturing: an Australian case." Journal of Public Affairs 8, no. 4 (2008): 233–47. http://dx.doi.org/10.1002/pa.298.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Meutia, Inten, Marini Ramadhani, and Mohamad Adam. "Does Eco-Efficiency Improve Financial Performance of Manufacturing Companies in Indonesia?" Jurnal Dinamika Akuntansi dan Bisnis 6, no. 2 (2019): 137–50. http://dx.doi.org/10.24815/jdab.v6i2.13785.

Повний текст джерела

Анотація:

This study aims to determine the impact of environmental performance proxied by eco-efficiency on the financial performance of manufacturing companies in Indonesia. İn this study, the multiple linear regression test was used to analyse the data. The sample of this study is manufacturing companies that listed at the Indonesia Stock Exchange from 2012 until 2016 with the total observation is 80 firm-years.The results of this study indicated that the average level of eco-efficiency of the manufacturing companies is still relatively low (0.38). The environmental performance as measured by the eco-

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Singhal, Tejendra Singh, Jinesh Kumar Jain, D. Atchuta Ramacharyulu, et al. "Eco-Design of Products and Processes: A Review on Principles and Tools for Sustainable Manufacturing." E3S Web of Conferences 505 (2024): 01033. http://dx.doi.org/10.1051/e3sconf/202450501033.

Повний текст джерела

Анотація:

Eco-design is a crucial approach in achieving sustainable manufacturing, which seeks to reduce the environmental impact of products and processes throughout their lifecycle. This paper explores the principles and tools that are used in eco-design, providing an overview of the key concepts and methods for sustainable manufacturing. The principles of eco-design are centered on minimizing the environmental impact of products and processes through the use of renewable resources, reducing waste and emissions, and improving energy and material efficiency. The paper discusses these principles in deta

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zulkiffli, Siti Nur ‘Atikah, Nur Farah Zafira Zaidi, Siti Falindah Padlee, and Najahul Kamilah Aminy Sukri. "Eco-Innovation Capabilities and Sustainable Business Performance during the COVID-19 Pandemic." Sustainability 14, no. 13 (2022): 7525. http://dx.doi.org/10.3390/su14137525.

Повний текст джерела

Анотація:

The COVID-19 pandemic has had a direct impact on the manufacturing industry in Malaysia because all economic activities had to be suspended for some time. This study explores the role that eco-innovation capabilities might play in improving sustainable business performance during the ongoing pandemic. This study employs a quantitative method by distributing online questionnaires to 80 small and medium enterprises (SMEs) in Klang Valley, Malaysia. In the study, the relationship between sustainable business performance and the three variables of eco-innovation capabilities, i.e., eco-product inn

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Yang, Qin, and Lin Sun. "Eco-Design in Manufacturing or Remanufacturing? The Sustainable Options in a Closed-Loop Supply Chain with Outsourcing." Sustainability 16, no. 4 (2024): 1633. http://dx.doi.org/10.3390/su16041633.

Повний текст джерела

Анотація:

Here, the authors focused on determining the increase in consumers’ preferences for sustainable products, including that of OEMs, who are responsible for the drop in new product sales. We also assessed the effects of remanufacturing by outsourcing to third-party remanufacturers. However, the outsourcing of remanufacturing not only enables the producer to offer a remanufactured product at the same time as manufacturing new units; it also provides OEMs with the flexibility required to peruse eco-design in manufacturing and/or remanufacturing. For instance, Gree and Midea have heavily invested in

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Khan, Noor Ullah, Ateeq-ur-Rehman Irshad, Adeel Ahmed, and Amira Khattak. "Do organizational citizenship behavior for the environment predict triple bottom line performance in manufacturing firms?" Business Process Management Journal 27, no. 4 (2021): 1033–53. http://dx.doi.org/10.1108/bpmj-01-2021-0007.

Повний текст джерела

Анотація:

PurposeOrganizational citizenship behavior for the environment (OCBE) is vital for manufacturing firms' ability to improve their triple bottom line (TBL) performance. This study's objective was to examine the direct relationship between three OCBE key dimensions, i.e. eco-initiatives (EIs), eco-civic-initiatives and eco-helping (EH) and TBL performance, i.e. economic (ECOP), social (SOP) and environmental (ENP).Design/methodology/approachThe quantitative design was used based on the positivist approach. A sample of 350 manufacturing firms was targeted using random probability sampling via a su

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Abdullah, Ziyad Tariq, Guo Shunsheng, and Sheng Buyun. "Eco-Design Application to Drive Sustainable Manufacturing." Advanced Science Letters 21, no. 12 (2015): 3610–14. http://dx.doi.org/10.1166/asl.2015.6561.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Sun, Mei, Ying Ru, Chun Xiao Li, and Yong Chao Sun. "Proposal of Eco Design for Chinese Manufacturing." Applied Mechanics and Materials 496-500 (January 2014): 2707–10. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.2707.

Повний текст джерела

Анотація:

Export value took more than half of GDP in average from 2007 to 2011. In recent years, Nations issued a large amount of environment standards; as a result, Chinese exported products suffered recall in main target nation of export because product did not meet requirement of eco-design. In China, small and medium-sized enterprises took more than half of total enterprise in manufacturing. For small and medium-sized enterprises, it is difficult to know well about all environment standards in world. This paper draw proposal for the development of Chinese manufacturing.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Gutowski, Timothy G. "The efficiency and eco-efficiency of manufacturing." International Journal of Nanomanufacturing 6, no. 1/2/3/4 (2010): 38. http://dx.doi.org/10.1504/ijnm.2010.034770.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Horta, J. F., F. J. P. Simões, and A. Mateus. "Large scale additive manufacturing of eco-composites." International Journal of Material Forming 11, no. 3 (2017): 375–80. http://dx.doi.org/10.1007/s12289-017-1364-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Gonzales, Julirose, Novita Sakundarini, Raja Ariffin, and Zahari bin Taha. "Integrated Eco-Design Tool for Malaysian Automobile Industry." Journal of Advanced Computational Intelligence and Intelligent Informatics 14, no. 1 (2010): 46–54. http://dx.doi.org/10.20965/jaciii.2010.p0046.

Повний текст джерела

Анотація:

Today’s manufacturing companies are burdened with the pressures of managing their products throughout its life cycles and ensure that their products have minimum impact in the environment through Eco-design methods. This paper looks into the different Product Eco-evaluation methods in terms of Material Recyclability, Manufacturing Process and Disassemblability used for Eco-design, especially in the automobile industry. From these methods, the authors propose an Eco-Design framework suited for Malaysian local automobile SMEs given their limited role in Automobile design.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Wang, Chuanhui, Asong Han, Weifeng Gong, Mengzhen Zhao, and Wenwen Li. "Threshold Effect of Manufacturing Agglomeration on Eco-Efficiency in the Yellow River Basin of China." Sustainability 15, no. 19 (2023): 14151. http://dx.doi.org/10.3390/su151914151.

Повний текст джерела

Анотація:

Research on the impact of industrial development on the ecological environment of the Yellow River Basin plays a significant role in accelerating the high-quality development of that key region of China. Since the impact of industrial agglomeration on eco-efficiency is very complex, this study constructs a panel threshold model of the impact of manufacturing agglomeration on eco-efficiency and analyzes the heterogeneity of different industries. The results led to the following conclusions: The optimal range for the industrial agglomeration level is 0.37 to 0.40. When the industrial agglomerati

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Shivramwar, Manish V., Nitin k. Kamble Nitin k. Kamble, and S. S. Sarnobat S.S.Sarnobat. "Role of Air As An Eco-Friendly Coolants in Green Manufacturing." Indian Journal of Applied Research 3, no. 10 (2011): 1–4. http://dx.doi.org/10.15373/2249555x/oct2013/45.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Rybaczewska-Błażejowska, Magdalena, and Aneta Masternak-Janus. "Assessing and Improving the Eco-Efficiency of Manufacturing: Learning and Challenges from a Polish Case Study." Energies 14, no. 23 (2021): 8125. http://dx.doi.org/10.3390/en14238125.

Повний текст джерела

Анотація:

Manufacturing offers substantial opportunities for economic growth after COVID-19, as long as it delivers competitively priced goods while simultaneously reducing pressure on the environment. In this study, we present the methodological feasibility of the joint application of life cycle assessment (LCA) and data envelopment analysis (DEA) for assessing eco-efficiency at the sector level. We employ this methodology to assess the environmental profiles of manufacturing in Poland in relation to their gross value added, and subsequently calculate the improvement targets for the eco-inefficient man

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Kaguara, Angela Wairimu, Peterson Obara Magutu, and Stephen Ochieng Odock. "THE RELATIONSHIP BETWEEN SUSTAINABLE MANUFACTURING OPERATIONS AND ENVIRONMENTAL PERFORMANCE OF PLASTICS AND RUBBER MANUFACTURERS IN KENYA: THE MODERATING EFFECT OF ECO-INNOVATIONS." International Journal of Professional Business Review 9, no. 10 (2024): e04934. http://dx.doi.org/10.26668/businessreview/2024.v9i10.4934.

Повний текст джерела

Анотація:

Objective: This study aimed to expose the effect of sustainable manufacturing operations on performance of plastics and rubber manufacturing firms in Kenya. Theoretical Framework: The main concepts and theories that support the research were conveyed. The study employed the natural resource-based view and ecological modernisation theory. Method: The study employed descriptive research survey that targeted all the 90 plastics and rubber manufacturing firms registered by the Kenya Association of manufacturers. A structured questionnaire as well as a data collection form were useful in collecting

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Lubis, Nurliza, and Najihatul Faridy. "Implementasi Eco-Innovation dan Sustainable Manufacturing terhadap Pertumbuhan Ekonomi Sirkular UMKM Di Kota Langsa." JURNAL BISNIS DAN KEWIRAUSAHAAN 20, no. 2 (2024): 92–100. http://dx.doi.org/10.31940/jbk.v20i2.92-100.

Повний текст джерела

Анотація:

This study aims to determine the implementation of Eco-Innovation and Sustainable Manufacturing on the Circular Economic Growth of MSMEs in Langsa City. This study uses quantitative research. Data collection by conducting surveys and questionnaires. The number of respondents is 100 people consisting of MSMEs in the food and beverage sector in Langsa City. Questionnaire data was tested using SPSS Version 23. The data analysis technique used linear regression analysis. The implementation of Eco-innovation is relatively small in influencing the circular economy. However, if the individual influen

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Gao, Yu, Zhuoqi Teng, Yan Cai, and Xiaotian Dong. "The government-business relationship and eco-innovation: evidence from chinese automobile industry." Ecological Chemistry and Engineering S 28, no. 4 (2021): 541–61. http://dx.doi.org/10.2478/eces-2021-0036.

Повний текст джерела

Анотація:

Abstract This study used 2017-2019 Chinese A-share-listed automobile manufacturing companies as research samples to analyse the impact of the government-business relationship on eco-innovation. We found that a healthy government-business relationship had a positive impact on enterprise eco-innovation. The mediating effects test verified that a healthy government-business relationship affected enterprise eco-innovation through financing constraints. In addition, managerial ownership significantly increased the positive impact of a healthy government-business relationship on enterprise eco-innov

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Jura, Przemysław. "Improving the eco-efficiency of manufacturing processes with the use of Industry 4.0 technologies in the circular economy." Scientific Papers of Silesian University of Technology. Organization and Management Series 2022, no. 158 (2022): 257–66. http://dx.doi.org/10.29119/1641-3466.2022.158.17.

Повний текст джерела

Анотація:

Purpose: The aim of the article is to analyze the implementation of the Industry 4.0 technologies to improve eco-efficiency of manufacturing processes from the perspective of the development of innovative IT technologies in the circular economy. Design/methodology/approach: The research methods used in the article were desk research analysis of available source data on the functioning of Industry 4.0 technologies. Additionally, the author bases on the institutional and legal method. Analysis of selected documents and existing studies have allowed to obtain answers to the research questions and

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Sri Hartanti, Dyah Ayu, Ulfa Wulan Agustina, Laili Nur Afifah, Dwi Santika, and Alfiyan Taufiqur Rohman. "Pelatihan Eco-Enzyme Sebagai Upaya Pengelolaan Sampah Rumah Tangga." Media Abdimas 2, no. 1 (2023): 20–27. http://dx.doi.org/10.37817/mediaabdimas.v2i1.2662.

Повний текст джерела

Анотація:

This training introduced the manufacture of Eco-Enzyme innovations inhousehold organic waste processing in reducing environmental pollution. Thetarget for the Eco-Enzyme manufacturing training activity was a general publicgroup, namely PKK mothers in Sudimoro Village, Megaluh District, JombangRegency, who were attended by as many as PKK mothers. The 20 participants inthis activity were held at the Sudimoro Village Hall. The steps taken in this activityinclude socialization, training, monitoring, and evaluation. In carrying out theactivities of KKN Sudimoro Megaluh members, activities are carri

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Mohamed Naina, Latifah, Yudi Fernando, and Muhammad Shabir Shaharudin. "EXTENDED ECO-EFFICIENT SUPPLY CHAIN INTEGRATION MANAGEMENT MODEL: A RESEARCH NOTE." Journal of Governance and Integrity 3, no. 1 (2019): 69–76. http://dx.doi.org/10.15282/jgi.3.1.2019.5423.

Повний текст джерела

Анотація:

Manufacturing organizations must improve their environmental protection as this is the requirement of every stakeholder nowadays. At the same time, manufacturing organizations that pursue environmental protection goal should adopt eco-efficient supply chain integration as it has been known to improve environmental protection without sacrificing economic and operational performances. Nevertheless, there is a decline in integration among manufacturing organizations and their supply chain partners. Furthermore, investigations in the literature have been one-dimensional toward the relationship bet

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Mtar, Kais, and Souad Bannour Ep Sfar. "Eco-label effects on French manufacturing firms’ performance." Human Systems Management 36, no. 2 (2017): 103–14. http://dx.doi.org/10.3233/hsm-171641.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Janahi, Noora A., Christopher M. Durugbo, and Odeh R. Al-Jayyousi. "Eco-innovation strategy in manufacturing: A systematic review." Cleaner Engineering and Technology 5 (December 2021): 100343. http://dx.doi.org/10.1016/j.clet.2021.100343.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Patrascu, Corina, Teofil Campean, Florin Grad, Ciprian Gradinariu, Maria Gavrilescu, and Dan-Alexandru Gavrilescu. "ECO-FRIENDLY CORRUGATED BOARD AND SUSTAINABLE PACKAGING MANUFACTURING." Environmental Engineering and Management Journal 16, no. 3 (2017): 705–14. http://dx.doi.org/10.30638/eemj.2017.072.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Ishak, Siti Aktar, Haslenda Hashim, and Tan Sie Ting. "Eco innovation strategies for promoting cleaner cement manufacturing." Journal of Cleaner Production 136 (November 2016): 133–49. http://dx.doi.org/10.1016/j.jclepro.2016.06.022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Metechko, L. B., and A. E. Sorokin. "Cluster Strategy for Eco-Innovation at Manufacturing Enterprises." Russian Engineering Research 38, no. 4 (2018): 316–19. http://dx.doi.org/10.3103/s1068798x18040172.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Li, Wen, Marius Winter, Sami Kara, and Christoph Herrmann. "Eco-efficiency of manufacturing processes: A grinding case." CIRP Annals 61, no. 1 (2012): 59–62. http://dx.doi.org/10.1016/j.cirp.2012.03.029.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Janmesh Hemant Bhoir, Jessly Rajan, Saloni Ramkrishna Patil, Atharva Rajeev Joshi, and Akshata Atul Shinde. "Design and manufacturing of eco-friendly acoustic panels." Global Journal of Engineering and Technology Advances 19, no. 2 (2024): 001–9. http://dx.doi.org/10.30574/gjeta.2024.19.2.0075.

Повний текст джерела

Анотація:

Noise pollution poses a significant global challenge, prompting a surge in research aimed at addressing this issue. While traditional acoustic panels using synthetic materials are commonly advocated, concerns over their health and environmental impacts have sparked interest in sustainable alternatives. This paper explores the blossoming trend of utilizing waste materials, particularly natural cellulose fibers derived from agricultural byproducts like coir fiber and rice husk, for sound absorption. Embracing the axioms of sustainability, the study investigates the feasibility of replacing synth

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Buitrago-Leiva, Jeimmy Nataly, Adriano Camps, and Alvaro Moncada Niño. "Considerations for Eco-LeanSat Satellite Manufacturing and Recycling." Sustainability 16, no. 12 (2024): 4933. http://dx.doi.org/10.3390/su16124933.

Повний текст джерела

Анотація:

This research aims to contribute to the development of the Eco-LeanSat concept by focusing on a sustainable approach to satellite manufacturing and the repurposing of remaining satellite capabilities after failure. Despite satellites no longer being suitable for their original purposes, these remaining capabilities can find new applications. The study begins by identifying relevant innovative eco-design applications. Subsequently, it examines sustainability within the satellite lifecycle supply chain, categorizing it into four methods: (1) active debris removal, (2) transport logistics, (3) mi

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Janmesh, Hemant Bhoir, Rajan Jessly, Ramkrishna Patil Saloni, Rajeev Joshi Atharva, and Atul Shinde Akshata. "Design and manufacturing of eco-friendly acoustic panels." Global Journal of Engineering and Technology Advances 19, no. 2 (2024): 001–9. https://doi.org/10.5281/zenodo.13691509.

Повний текст джерела

Анотація:

Noise pollution poses a significant global challenge, prompting a surge in research aimed at addressing this issue. While traditional acoustic panels using synthetic materials are commonly advocated, concerns over their health and environmental impacts have sparked interest in sustainable alternatives. This paper explores the blossoming trend of utilizing waste materials, particularly natural cellulose fibers derived from agricultural byproducts like coir fiber and rice husk, for sound absorption. Embracing the axioms of sustainability, the study investigates the feasibility of replacing synth

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Maldonado-Guzmán, Gonzalo, and Sandra Yesenia Pinzón-Castro. "Financial resources, eco-innovation and sustainability performance in automotive industry." Tec Empresarial 16, no. 2 (2022): 34–54. http://dx.doi.org/10.18845/te.v16i2.6169.

Повний текст джерела

Анотація:

Eco-innovation is considered in the literature as one of the most important constructs that substantially improve the environmental sustainability of manufacturing companies. However, it has been shown that companies alone cannot adequately develop eco-innovation activities, to achieve not only a higher level of eco-innovation activities, but also a significant improvement in the level of sustainable performance of manufacturing firms. In addition, little is known about the relationship between financial resources, eco-innovation and sustainable performance fill this gap in the literature and

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Herrmann, Christoph, Stefan Blume, Denis Kurle, Christopher Schmidt, and Sebastian Thiede. "The Positive Impact Factory–Transition from Eco-efficiency to Eco–effectiveness Strategies in Manufacturing." Procedia CIRP 29 (2015): 19–27. http://dx.doi.org/10.1016/j.procir.2015.02.066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Martínez-Serna, María del Carmen, Javier Eduardo Vega-Martínez, María del Carmen Bautista-Sánchez, and Gabriela Citlalli López-Torres. "Eco-innovation as an antecedent of environmental performance and sustainable competitive performance in the manufacturing industry." Journal of Infrastructure, Policy and Development 8, no. 14 (2024): 7331. https://doi.org/10.24294/jipd7331.

Повний текст джерела

Анотація:

In recent years, the environment in the manufacturing industry has become strongly competitive, which is why companies have found it necessary to constantly adjust their strategies and take actions aimed at improving their performance and competitiveness in a sustainable way to grow and remain in the market. Therefore, this paper aims to present an analysis to explain the current situation in the manufacturing industry in Aguascalientes, Mexico, by means of a survey in which product eco-innovation (PEI), process eco-innovation (PrEI) and organizational eco-innovation (OEI) and its effect on en

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Kumar, Sanjeev, Somnath Chattopadhyaya, and Vinay Sharma. "Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry." Advanced Materials Research 472-475 (February 2012): 3359–70. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.3359.

Повний текст джерела

Анотація:

This study aims to investigate the sustainable supply chain management practices likely to be adopted by the manufacturing industry of automotive products in India. The approach of the present research includes a literature review, in depth interviews and questionnaire surveys. The relationship between sustainable supply chain management practices and environmental performance is studied. The industries in the automotive products industry in India were sampled for empirical study. The data were then analyzed using statistical package for the social sciences is used as a path analysis model to

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Peralta, M. E., Francisco Aguayo González, and Juan Ramón Lama Ruiz. "Clean Manufacturing from Cradle to Cradle." Key Engineering Materials 502 (February 2012): 43–48. http://dx.doi.org/10.4028/www.scientific.net/kem.502.43.

Повний текст джерела

Анотація:

The sustainability of manufacturing processes lies in industrial planning and productive activity. Industrial plants are characterized by the management of resource (inputs and outputs), processing and conversion processes, which usually are organized in a linear system. Good planning will optimize the manufacturing and promoting the quality of the industrial system. Cradle to Cradle is a new paradigm for engineering and sustainable manufacturing that integrates projects (industrial parks, manufacturing plants, systems and products) in a framework consistent with the environment, adapted to th

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Ceptureanu, Sebastian Ion, Eduard Gabriel Ceptureanu, Doina Popescu, and Olguta Anca Orzan. "Eco-innovation Capability and Sustainability Driven Innovation Practices in Romanian SMEs." Sustainability 12, no. 17 (2020): 7106. http://dx.doi.org/10.3390/su12177106.

Повний текст джерела

Анотація:

This study examines the influence of eco-innovation capability on sustainability driven innovation practices in SMEs. In this study, eco-innovation capability is represented by four factors—internal setting, strategies, operations and structure—while sustainability driven innovation practices are represented by three types of practices—process, organizational and product. The direct relationship between eco-innovation capability and sustainability driven innovation practices is statistically tested by using a sample of 397 Romanian manufacturing small and medium-sized enterprises using PLS–SEM

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Dharsana, Muhammad Try, Andi Iqra Pradipta Natsir, Naufal Muhammad Aksah, and Ihya' Ulumuddin. "Eco-Control and Its Dual Impact on Environmental and Economic Performance." Hasanuddin Economics and Business Review 8, no. 2 (2024): 85. http://dx.doi.org/10.26487/hebr.v8i2.5362.

Повний текст джерела

Анотація:

This study examines the dual impact of eco-control on both environmental and economic performance in the manufacturing sector. Drawing on data from 183 managers of manufacturing companies in Indonesia, this research employs Partial Least Squares Structural Equation Modelling (PLS-SEM) to analyse the relationships between eco-control, environmental performance, and economic performance. The findings reveal that eco-control significantly enhances environmental performance, which in turn positively influences economic outcomes. Additionally, eco-control has a direct positive effect on economic pe

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Mutiarasari, Nurul Risti, Tenten Tedjaningsih, Suyudi Suyudi, and Suhardjadinata Suhardjadinata. "Alternative Organic Waste Processing Through Eco-Enzyme Manufacturing Innovation." Dinamisia : Jurnal Pengabdian Kepada Masyarakat 8, no. 3 (2024): 846–53. https://doi.org/10.31849/dinamisia.v8i3.13548.

Повний текст джерела

Анотація:

Agricultural development is faced with various challenges, such as climate change which can lead to food insecurity, the conversion of agricultural cultivation land to non-agriculture, population growth followed by an increase in food demand, exploitation, and degradation of agricultural land resources which causes a decrease in soil quality, environment, and agricultural products. Organic fertilizer can be obtained from the processing of organic waste which is produced either from agricultural waste or from household organic waste. Making eco-enzymes is an innovation that can be applied at th

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Sukri, Najahul Kamilah Aminy, Siti Nur ‘Atikah Zulkiffli, Nik Hazimah Nik Mat, Khatijah Omar, Mukhammad Kholid Mawardi, and Nur Farah Zafira Zaidi. "An Analysis of Eco-Innovation Capabilities among Small and Medium Enterprises in Malaysia." Administrative Sciences 13, no. 4 (2023): 113. http://dx.doi.org/10.3390/admsci13040113.

Повний текст джерела

Анотація:

The objective of this study is to look at how Malaysian small and medium enterprises (SMEs) are applying eco-innovation capabilities in order to sustain their business performance. Eco-innovation capabilities are represented in this study by five different types of practices, with the indication of unexpected circumstances: eco-product innovation, eco-process innovation, eco-organisational innovation, eco-marketing innovation, and eco-technology innovation. The qualitative research approach was used in the study, and the content analysis was based on in-depth interviews with six top-level mana

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Dwiputra, Gusti Kurnia, Wahdiyat Moko, and Christin Susilowati. "The influence of strategic flexibility on green business performance mediated by eco innovation and green manufacturing." International Journal of Research in Business and Social Science (2147- 4478) 14, no. 4 (2025): 32–41. https://doi.org/10.20525/ijrbs.v14i4.4223.

Повний текст джерела

Анотація:

The study aims to examine and analyze the role of strategic flexibility on green business performance with eco innovation and green manufacturing as mediating variables. This research adopts a quantitative approach with a purposive sampling technique. The object of the study is manufacturing companies in East Java that are registered under the PROPER program. A total of 136 respondents participated in this study. Data were collected using a questionnaire and analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). The research results show that strategic flexibility signifi

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Hong, Myoung-Pyo, Woo-Sung Kim, Ji-Hyun Sung, Dong-Hyuk Kim, Ki-Man Bae, and Young-Suk Kim. "High-performance eco-friendly trimming die manufacturing using heterogeneous material additive manufacturing technologies." International Journal of Precision Engineering and Manufacturing-Green Technology 5, no. 1 (2018): 133–42. http://dx.doi.org/10.1007/s40684-018-0014-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Garcia-Muiña, González-Sánchez, Ferrari, Volpi, Pini, and Settembre-Blundo. "Identifying the Equilibrium Point between Sustainability Goals and Circular Economy Practices in an Industry 4.0 Manufacturing Context Using Eco-Design." Social Sciences 8, no. 8 (2019): 241. http://dx.doi.org/10.3390/socsci8080241.

Повний текст джерела

Анотація:

For manufacturing companies, the transition to circular business models (CBMs) can be hampered both by the lack of relevant data and by operational tools. Eco-design, associated with Industry 4.0 IoT (Internet of Things) technologies, can be an effective methodological approach in developing products that are consistent with the principles of the circular economy. The reason is that, in the design phase, decisions are made that can significantly influence the degree of sustainability of products during their lifecycle. Therefore, in the manufacturing environment, eco-design represents an innov

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Suhery, Suhery, Muthia Roza Linda, Thesa Alif Ravelby, et al. "Analisis Penerapan Green Supply Chain Management Terhadap Kinerja Perusahaan Pada UMKM Kuliner Roti di Kota Padang." Jurnal Ekonomi dan Bisnis Dharma Andalas 26, no. 2 (2024): 389–405. http://dx.doi.org/10.47233/jebd.v26i2.1568.

Повний текст джерела

Анотація:

This study aims to analyze how the influence of eco design, green manufacturing and green purchasing on the performance of UMKM Culinary Bread companies in Padang City. The population that will be used as material in the research is all Bread Culinary MSMEs in Padang City, totaling 150 MSMEs. Data was collected through distributing questionnaires and data processing was carried out through SmartPLS version 4 software. The results of this study indicate that (1) eco design has a significant positive effect on company performance (2) Green manufacturing has a significant negative effect on compa

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Muthoni L., Kibibi. "Sustainable Practices in Pharmaceutical Manufacturing." NEWPORT INTERNATIONAL JOURNAL OF PUBLIC HEALTH AND PHARMACY 6, no. 2 (2025): 42–49. https://doi.org/10.59298/nijpp/2025/624249.

Повний текст джерела

Анотація:

Sustainable pharmaceutical manufacturing integrates green chemistry, energy efficiency, and responsible resource management to minimize environmental impact. The industry faces challenges such as high greenhouse gas emissions, extensive water usage, and hazardous waste generation. Regulatory frameworks enforce sustainability but are often perceived as burdensome. Companies adopting eco-friendly technologies benefit from cost savings, improved efficiency, and enhanced market competitiveness. Sustainable sourcing, circular economy principles, and case studies highlight best practices, while fina

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Pinzón-Castro, Sandra Yesenia, Gonzalo Maldonado-Guzmán, and Raymundo Juárez-Del Toro. "Eco-innovation Types Adoption in Mexican Small and Medium Firms." Journal of Management and Sustainability 13, no. 2 (2023): 127. http://dx.doi.org/10.5539/jms.v13n2p127.

Повний текст джерела

Анотація:

The debate on eco-innovation is a relatively recent and emerging topic in the literature, and although it is gaining interest among cientific, academic, and enterprise community, and the analysis and discussion in the context of small and medium-sized enterprises is in an embryonic stage, especially in emerging economy countries, such as Mexico. In this sense, the objective of this research is to analyze the most important eco-innovation types that affect eco-innovation adoption in manufacturing SMEs. The results obtained follow that product eco-innovation, process eco-innovation and managemen

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Kulej-Dudek, Edyta. "Ecolabnet service packages as a response to the needs of manufacturing enterprises in the SME sector of the Baltic Sea Region." Production Engineering Archives 27, no. 4 (2021): 265–71. http://dx.doi.org/10.30657/pea.2021.27.35.

Повний текст джерела

Анотація:

Abstract Nowadays, the competitiveness of the economy, which is determined to a large extent by the innovative activities of enterprises and institutions, is of great importance for economic development. An important type of innovation is eco-innovations. Eco-innovations are currently a very timely topic undertaken by researchers, but also an important element of the activities of many companies. As a network of service providers for eco-innovations in small and medium-sized manufacturing enterprises, ECOLABNET fits perfectly in this trend. It aims to support, enable and empower companies to u

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Заславська, Світлана. "ECO-ORIENTED MANUFACTURING TECHNOLOGIES IN THE PROFESSIONAL TRAINING OF TILERS." Professional Pedagogics 2, no. 27 (2023): 87–96. http://dx.doi.org/10.32835/2707-3092.2023.27.87-96.

Повний текст джерела

Анотація:

The relevance of this article is dictated by the acuteness of the environmental pollution issue, especially from the construction sector, which presents a challenge both for Ukraine and globally. One of the solutions to this problem is the implementation of green building, which involves the use of environmentally friendly materials, innovative waste-free and low-waste technologies, alternative energy sources, waste recycling, etc. This necessitates new, ecologically oriented approaches in the training of qualified construction workers, particularly tile setters. Objective: Based on global and

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Nzumile, Jailos Mrisho, Dickson Pastory, and Ismail W. R. Taifa. "The Effect of Eco-innovation on Environmental Performance in Manufacturing Industries." JOURNAL OF THE GEOGRAPHICAL ASSOCIATION OF TANZANIA 44, no. 2 (2024): 18–33. https://doi.org/10.56279/jgat.v44i2.306.

Повний текст джерела

Анотація:

This article assesses the effect of eco-innovative activities in manufacturing industries. Its study employed a mixed-methods approach by gathering, analysing, and mixing quantitative and qualitative methods. Thirty-nine (39) manufacturing industries participated in the study. These were identified using a non-probability sampling method, specifically a purposive sampling technique. The convergent parallel design was employed to collect, analyse, and integrate qualitative and quantitative data and results simultaneously. Minitab® version 21, Microsoft® Excel 2016, and SPSS® software collaborat

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Ma, Jian, Fengfu Yin, Zhenyu Liu, and Xiaodong Zhou. "The Eco-design and Green Manufacturing of a Refrigerator." Procedia Environmental Sciences 16 (2012): 522–29. http://dx.doi.org/10.1016/j.proenv.2012.10.072.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Tanabe, Ikuo. "Double-ECO Model Technologies for an Environmentally-friendly Manufacturing." Procedia CIRP 48 (2016): 495–501. http://dx.doi.org/10.1016/j.procir.2016.03.243.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Walsh, Justin M., and Gangaram Singh. "An eco-efficiency analysis of the snowboard manufacturing industry." International Journal of Sustainable Society 1, no. 4 (2009): 364. http://dx.doi.org/10.1504/ijssoc.2009.028907.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!