Увійти

Готові списки джерел за темами / Elastic characteristics / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Elastic characteristics.

Статті в журналах з теми "Elastic characteristics"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Elastic characteristics".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Trębacz, Hanna, and Angelika Barzycka. "Mechanical Properties and Functions of Elastin: An Overview." Biomolecules 13, no. 3 (2023): 574. http://dx.doi.org/10.3390/biom13030574.

Повний текст джерела

Анотація:

Human tissues must be elastic, much like other materials that work under continuous loads without losing functionality. The elasticity of tissues is provided by elastin, a unique protein of the extracellular matrix (ECM) of mammals. Its function is to endow soft tissues with low stiffness, high and fully reversible extensibility, and efficient elastic–energy storage. Depending on the mechanical functions, the amount and distribution of elastin-rich elastic fibers vary between and within tissues and organs. The article presents a concise overview of the mechanical properties of elastin and its

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Lebedev, E. K. "Elastic characteristics of elastomers." Journal of Applied Mechanics and Technical Physics 33, no. 5 (1992): 756–58. http://dx.doi.org/10.1007/bf00852213.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Irina, Polyakova, Imambayeva Raikhan, Aubakirova Bakyt, Shogelova Nazym, Glyzno Yevgeniya, and Zhumagulova Aigerim. "Determining static characteristics of corrugated shell elements made from composite materials." Eastern-European Journal of Enterprise Technologies 6, no. 7 (120) (2022): 63–76. https://doi.org/10.15587/1729-4061.2022.269399.

Повний текст джерела

Анотація:

This paper considers elastic shell elements. They move under pressure. The type of dependence of displacement on pressure is called the elastic characteristic of the element. The object of this study is shell elements with a complex surface shape, consisting of composite materials of the "metal-metal" type. The composite is a metal shell with reinforcing fiber made of another metal material. The form of reinforcement is different. The task to be solved is to determine the elastic characteristics of the shell elements depending on the geometric parameters, as well as the mechanical va

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Malanon, Sasatorn, Surachai Dechkunakorn, Niwat Anuwongnukroh, and Wassana Wichai. "Comparison of Three Commercial Latex and Non-Latex Orthodontic Elastic Bands." Key Engineering Materials 814 (July 2019): 354–59. http://dx.doi.org/10.4028/www.scientific.net/kem.814.354.

Повний текст джерела

Анотація:

Orthodontic elastic bands are commonly made from natural rubber because they provide high resiliency at a reasonable cost. However, hypersensitivity related to protein present in latex have been reported in some patients which has led to increased usage of non-latex elastic alternatives. Therefore, the assessment of their mechanical properties is of importance. The objective of this study was to compare the physical and mechanical properties of three commercial latex and non-latex type orthodontic elastic bands. Samples of latex and non-latex type orthodontic elastics from manufacturers – AO (

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Irina, Polyakova, Imambayeva Raikhan, and Aubakirova Bakyt. "Determining the dynamic characteristics of elastic shell structures." Eastern-European Journal of Enterprise Technologies 6, no. 7 (114) (2021): 43–51. https://doi.org/10.15587/1729-4061.2021.245885.

Повний текст джерела

Анотація:

Building structures are very often operated under the action of dynamic loads, both natural and man-made. The calculation of structures under the influence of static loads has been quite widely studied in detail. When structures are exposed to dynamic loads, additional tests are carried out, where measuring instruments are installed on the structures to register stresses and deformations that occur during dynamic influences. Elastic elements are the responsible functional unit of many measuring instruments. Therefore, the quality of elastic elements ensures the operational stability of the ent

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Wu, R., and K. Aki. "Scattering characteristics of elastic waves by an elastic heterogeneity." GEOPHYSICS 50, no. 4 (1985): 582–95. http://dx.doi.org/10.1190/1.1441934.

Повний текст джерела

Анотація:

Elastic wave scattering by a general elastic heterogeneity having slightly different density and elastic constants from the surrounding medium is formulated using the equivalent source method and Born approximation. In the low‐frequency range (Rayleigh scattering) the scattered field by an arbitrary heterogeneity having an arbitrary variation of density and elastic constants can be equated to a radiation field from a point source composed of a unidirectional force proportional to the density contrast between the heterogeneity and the medium, and a force moment tensor proportional to the contra

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Polyakov, V. V., and A. V. Golovin. "Elastic characteristics of porous materials." Journal of Applied Mechanics and Technical Physics 34, no. 5 (1994): 625–28. http://dx.doi.org/10.1007/bf00859826.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Pavlov, Peter, and Daniel Evlogiev. "Experimental Determination of the Elastic-Viscous Characteristics of Elastic Ropes." Procedia Engineering 108 (2015): 488–95. http://dx.doi.org/10.1016/j.proeng.2015.06.190.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Zhang, Ji Min, and Kuan Yang. "Vibration Characteristics of Elastic Disc Brake Pad Device." Applied Mechanics and Materials 101-102 (September 2011): 29–32. http://dx.doi.org/10.4028/www.scientific.net/amm.101-102.29.

Повний текст джерела

Анотація:

A new elastic disc brake pad device is designed. A mathematical model on railway vehicle elastic disc brake is established compared with the non-elastic brake pad by uni-wheel set braking simulation. The simulation results show that the elastic brake pad could guarantee the vehicle braking performance as same as the non-elastic brake pad. When the friction surface of the brake disc or pad has defects, the elastic brake pad can effectively reduce the vibration of the friction force between the brake pad and the brake disc. It has been proved that the correctness and rationality of the design. A

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Han, Qing Bang, Jian Li, Hao Wang, and Chang Ping Zhu. "Characteristics of Laser-Generated Visco-Elastic Rayleigh Waves." Key Engineering Materials 543 (March 2013): 22–25. http://dx.doi.org/10.4028/www.scientific.net/kem.543.22.

Повний текст джерела

Анотація:

This paper reports on a study of the propagation characteristics of visco-elastic, Rayleigh waves induced by laser ultrasonics in half space structures. Beginning with the Kelvin model, the characterization equation and the normal displacement of visco-elastic Rayleigh waves in are derived and the influence of the visco-elastic modulus on dispersion and attenuation are discussed. The transient response of a visco-elastic Rayleigh wave is also simulated by means of Laplace and Hankel inversion transforms. The papers results and conclusions will provide insights and guidance for estimating visco

Стилі APA, Harvard, Vancouver, ISO та ін.

11

XIONG, Jiang, Wei GUO, Ren WEI, Shang-wei ZUO, Xiao-ping LIU, and Tao ZHANG. "Elastic fiber regeneration in vitro and in vivo for treatment of experimental abdominal aortic aneurysm." Chinese Medical Journal 126, no. 3 (2013): 437–41. http://dx.doi.org/10.3760/cma.j.issn.0366-6999.20122151.

Повний текст джерела

Анотація:

Background The pathological characteristics of abdominal aortic aneurysm (AAA) involved the regression of extracellular matrix (ECM) in aortic walls, especially elastic structure in medial layer. As the major structural protein of aorta, elastin contributes to the extensibility and elastic recoil of the vessels. We hypothesized that overexpression of elastin in vessel walls might regenerate the elastic structure of ECM, restore the elastic structure of the aneurysmal wall, and eventually lead to a reduction of aortic diameters (ADs) in an experimental model of AAA. Methods Tropoelastin (TE) of

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Onanko, A. P., Oleg Lyashenko, and Y. A. Onanko. "Static Elastic Characteristics of Carbon Nanotubes." ECS Transactions 25, no. 21 (2019): 7–10. http://dx.doi.org/10.1149/1.3299285.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Fouke, J. M., A. D. Wolin, K. P. Strohl, and G. M. Galbraith. "Elastic characteristics of the airway wall." Journal of Applied Physiology 66, no. 2 (1989): 962–67. http://dx.doi.org/10.1152/jappl.1989.66.2.962.

Повний текст джерела

Анотація:

To examine the elastic behavior of the upper airway, we obtained pressure-area plots from data gathered from acoustic images of the airway and measurements of mouth pressure during tidal breathing in 10 adult human volunteers (dA/dP). These plots revealed both tidal hysteresis and a change in slope as a function of distance along the airway. The slope of the regression line of the dA/dP plots decreased from the pharyngeal region to the trachea and became 0 at the thoracic inlet, the location of which was independently assessed. In most subjects the slope became negative distal to the thoracic

Стилі APA, Harvard, Vancouver, ISO та ін.

14

ARAI, Norio, and Jun-Ho HONG. "608 Oscillation Characteristics of Elastic Body." Proceedings of Conference of Kanto Branch 2000.6 (2000): 131–32. http://dx.doi.org/10.1299/jsmekanto.2000.6.131.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Zheng, Ziyue, Haisheng Shu, A. Shuowei, Di Mu, Lei Zhao, and Yuqiang Su. "Vibration Characteristics of Elastic Metamaterial Rod." IOP Conference Series: Materials Science and Engineering 649 (October 17, 2019): 012009. http://dx.doi.org/10.1088/1757-899x/649/1/012009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Gai, M. I., �. S. Zelenskii, L. I. Manevich, et al. "Elastic characteristics of randomly nonuniform composites." Mechanics of Composite Materials 23, no. 2 (1987): 172–78. http://dx.doi.org/10.1007/bf00606317.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Dakin, V. I. "Elastic characteristics of branched-network polymers." Journal of Applied Polymer Science 60, no. 7 (1996): 999–1003. http://dx.doi.org/10.1002/(sici)1097-4628(19960516)60:7<999::aid-app10>3.0.co;2-p.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Polyakova, Irina, Raikhan Imambayeva, and Bakyt Aubakirova. "Determining the dynamic characteristics of elastic shell structures." Eastern-European Journal of Enterprise Technologies 6, no. 7 (114) (2021): 43–51. http://dx.doi.org/10.15587/1729-4061.2021.245885.

Повний текст джерела

Анотація:

Building structures are very often operated under the action of dynamic loads, both natural and man-made. The calculation of structures under the influence of static loads has been quite widely studied in detail. When structures are exposed to dynamic loads, additional tests are carried out, where measuring instruments are installed on the structures to register stresses and deformations that occur during dynamic influences. Elastic elements are the responsible functional unit of many measuring instruments. Therefore, the quality of elastic elements ensures the operational stability of the ent

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Zhao, Jian Bin, Ying Chun Ji, Xiao Liu, and Di Li. "Experimental Study on Dynamic Characteristics of Tailings." Applied Mechanics and Materials 580-583 (July 2014): 455–59. http://dx.doi.org/10.4028/www.scientific.net/amm.580-583.455.

Повний текст джерела

Анотація:

In this paper, the dynamic characteristics for three different kinds of copper tailings are studied through a series of cyclic triaxial tests. It is found that under confining pressure 200 and 300 kPa, elastic modulus raises with the increasement of coarse grain content to a certain degree and then declines, and the maximum elastic modulus corresponds to good gradation. While, as for confining pressure 100 kPa, elastic modulus raises with the increasement of fine grain content. It is also found that elastic modulus raises with the increasement of confning pressure. And, damping ratio raises wi

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Khazieva, M. A., A. B. Trapeznikova, and M. A. Yarmoshkaeva. "Analysis of Elastic Characteristics of Carbonate Reservoirs." Вестник Пермского университета. Геология 22, no. 3 (2023): 227–37. http://dx.doi.org/10.17072/psu.geol.22.3.227.

Повний текст джерела

Анотація:

The purpose of this study is to analyze the elastic characteristics of the carbonate reservoirs of the Bashkirian and Moscovian Stages of the middle section of the Carboniferous system of the oil field. As part of the study, acoustic and density curves were restored for the intervals where logging was not performed. The petrophysical interpretation of the data, the identification of reservoirs, and the assessment of reservoir properties were carried out. The elastic properties analysis of the rocks has been conducted, and the possibility of identifying reservoirs using elastic parameters has b

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Zhang, Yong, Li Wan, and Xiong Wei Li. "The Deformation Characteristics of Soft Clay under Cyclic Loading." Advanced Materials Research 446-449 (January 2012): 1709–12. http://dx.doi.org/10.4028/www.scientific.net/amr.446-449.1709.

Повний текст джерела

Анотація:

Through the undrained dynamic triaxial experiment, the deformation characteristics of saturated soft clay under cyclic loading are investigated. The cyclic loading was simplified as sine wave. It is found that under different dynamic stress, the deformation patterns of specimen in this experiment can be divided into three kinds, such as dense compressed, tensile break-up and shear failure type. In the process of vibration, the deformation forms of samples can also be divided into three types by dynamic stress amplitude, such as stable, destructive and critical type. The dynamic stress amplitud

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Yu, Jianghong, Ran Zhang, Wen Yang, and Qishui Yao. "Dynamic Contact Characteristics of Elastic Composite Cylindrical Roller Bearing." Open Mechanical Engineering Journal 9, no. 1 (2015): 703–8. http://dx.doi.org/10.2174/1874155x01509010703.

Повний текст джерела

Анотація:

Elastic composite cylindrical roller bearing is a kind of new bearing. In view of its structural particularity, explicit dynamics finite element model of elastic composite cylindrical roller bearing is established by utilizing ABAQUS/EXPLICIT. Dynamic responses of elastic composite cylindrical roller bearing are analyzed and response analysis is compared under different radial loads and rotation speeds. Dynamic responses of elastic composite cylindrical roller bearing are analyzed and response analysis is compared under different radial loads and rotation speeds. Results show that rolling and

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Faghidian, Seyed Ali, and Abdelouahed Tounsi. "DYNAMIC CHARACTERISTICS OF MIXTURE UNIFIED GRADIENT ELASTIC NANOBEAMS." Facta Universitatis, Series: Mechanical Engineering 20, no. 3 (2022): 539. http://dx.doi.org/10.22190/fume220703035f.

Повний текст джерела

Анотація:

The mixture unified gradient theory of elasticity is invoked for the rigorous analysis of the dynamic characteristics of elastic nanobeams. A consistent variational framework is established and the boundary-value problem of dynamic equilibrium enriched with proper form of the extra non-standard boundary conditions is detected. As a well-established privilege of the stationary variational theorems, the constitutive laws of the resultant fields cast as differential relations. The wave dispersion response of elastic nano-sized beams is analytically addressed and the closed form solution of the ph

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Luo, Yi, Dawei Xiao, Jingzhuo Zhang, and Zuqiu Li. "Research on the Elastic Loss Characteristics of Acoustic Echoes from Underwater Corner Reflector." Sensors 25, no. 12 (2025): 3776. https://doi.org/10.3390/s25123776.

Повний текст джерела

Анотація:

The underwater corner reflector is a “concave” elastic structure, and its acoustic echo exhibits large elastic loss, which affects its practical use. To study the acoustic echo elastic loss characteristics of underwater corner reflectors, based on the characteristics of small concave elastic structures of underwater corner reflectors, theoretical calculations were performed using the method of a combination of finite element and boundary element. Taking the underwater rigid corner reflector as the benchmark, the acoustic echo differences between similar types of underwater elastic corner refle

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Chen, Zhi Hua, Guo Jun Sun, and Zhan Sheng Liu. "The Effect of Cable Material Characteristics on Suspendome." Advanced Materials Research 156-157 (October 2010): 1251–55. http://dx.doi.org/10.4028/www.scientific.net/amr.156-157.1251.

Повний текст джерела

Анотація:

Cable is the key component in the prestressed steel structure. In order to study the effect of cable elastic modulus and expansion coefficient on the prestressed steel structure, Suspendome of Tianbao Center was taken as the research object and APDL language is applied to write a corresponding program, thereby carrying out analysis to the model; The results indicate that the change of cable expansion coefficient and cable elastic modulus have a different effect on the performance of the suspendome: at high temperature, the effect of the expansion coefficient of hoop cable and radial cable is l

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Madan, Dinesh Kumar, Aanchal Gaba, and Ritu Goyal. "PLANE STRAIN DEFORMATION WITH REPEATED CHARACTERISTICS VALUES." South East Asian J. of Mathematics and Mathematical Sciences 18, no. 02 (2022): 389–406. http://dx.doi.org/10.56827/seajmms.2022.1802.32.

Повний текст джерела

Анотація:

The objective of the present study is to derive the analytical expression for deformation field in an orthotropic elastic medium by using repeated characteristics values as a result of inclined line-load . For the procedure the method of equal characteristics value and Fourier transformation is used. To represent graphically, the elastic constants for two distinct elastic materials have been considered. To see the effect of inclination, the variations in displacements and stresses for different values of inclination i.e. at δ = 00 , 300 , 600 , 900 have been depicted graphically. It is found t

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Gim, Jinsu, Joohyeong Jeon, Bongju Kim, Taejoon Jeong, Kyeonghyeon Jeon, and Byungohk Rhee. "Quantification and design of jumping-ski characteristics." Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 232, no. 2 (2017): 150–59. http://dx.doi.org/10.1177/1754337117721831.

Повний текст джерела

Анотація:

Elastic and dynamic characteristics of jumping-skis affect ski performance at all four ski jumping phases. Compared with the number of studies on alpine-skis, there have been few studies on the characteristics of jumping-skis. This article identifies design parameters that have the most influence on jumping-ski characteristics. To identify the elastic and dynamic characteristics of jumping-skis, previous research and testing methods for alpine-skis were modified. Spring constants and bending stiffness distributions for three jumping-skis were measured. Natural frequencies, modal shapes, and da

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Liu, Bo, Hang Lin, and Yifan Chen. "Deformation Characteristics of Bolted Rock Joints under Compression-Shear Load." Applied Sciences 12, no. 10 (2022): 5226. http://dx.doi.org/10.3390/app12105226.

Повний текст джерела

Анотація:

Joints exist widely in tunnel engineering. Studying the deformation characteristics of the bolted joint is beneficial for preventing rock mass disasters. To reveal the deformation characteristics of bolted rock joints, the elastic solutions of the radial deformation characteristics of bolted rock joints under compression-shear load were derived, which were based on the Lame solution in elastic mechanics and the displacement coordination condition of the interface between the bolt and the joint (assuming that the displacement at the interface between the bolt and joint is equal). Then, the dist

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Fonck, E., G. Prod'hom, S. Roy, L. Augsburger, D. A. Rüfenacht, and N. Stergiopulos. "Effect of elastin degradation on carotid wall mechanics as assessed by a constituent-based biomechanical model." American Journal of Physiology-Heart and Circulatory Physiology 292, no. 6 (2007): H2754—H2763. http://dx.doi.org/10.1152/ajpheart.01108.2006.

Повний текст джерела

Анотація:

Arteries display a nonlinear anisotropic behavior dictated by the elastic properties and structural arrangement of its main constituents, elastin, collagen, and vascular smooth muscle. Elastin provides for structural integrity and for the compliance of the vessel at low pressure, whereas collagen gives the tensile resistance required at high pressures. Based on the model of Zulliger et al. (Zulliger MA, Rachev A, Stergiopulos N. Am J Physiol Heart Circ Physiol 287: H1335–H1343, 2004), which considers the contributions of elastin, collagen, and vascular smooth muscle cells (VSM) in an explicit

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Ogar, P. M., and V. A. Tarasov. "Determination of the Elastic Characteristics of Bodies with Thin Coatings." Advanced Materials Research 677 (March 2013): 267–72. http://dx.doi.org/10.4028/www.scientific.net/amr.677.267.

Повний текст джерела

Анотація:

We Consider a Layered Elastic Body, Consisting of Base Material with Young's Modulus E0 and Poisson's Ratio ν0 and Coating Thickness δ, Respectively, with E1 и ν1. the Thickness of the Base Is much Greater than the Thickness of the Coating. A Stiffness Model of the Layered Body with Loading His Axisymmetric Load, which Allows to Determine its Elastic Characteristics Is Proposed. the Quantitative Effect of the Relative Thickness of the Coating, the Ratio of the Elastic Properties of the Materials and Forms of the Applied Load Is Shown. an Expression for Determining the Elastic Modulus of the Co

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Lee, Young Seon, J. H. Lee, Yong Nam Kwon, and T. Ishikawa. "Effects of Material Properties on Elastic Characteristics of Cold Forged Part." Materials Science Forum 449-452 (March 2004): 853–56. http://dx.doi.org/10.4028/www.scientific.net/msf.449-452.853.

Повний текст джерела

Анотація:

The dimension of cold forged part is larger than that of the die cavity. The difference could be originated from the various features, such as the elastic characteristics of die and workpiece, thermal influences, and machine-elasticity. Among these features, elastic behavior of die and workpiece has been considered as the most important element for the precision cold forging. In the present study, the effect of material properties of both workpiece and die on the dimensional precision of forged part was investigated using FE and experimental analyses. Three materials, such as SCM420H, Cu-OFHC

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Wang, Zhenlin, Zhansheng Liu, and Guanghui Zhang. "Dynamic characteristics of elastic ring squeeze film damper." Industrial Lubrication and Tribology 71, no. 10 (2019): 1144–51. http://dx.doi.org/10.1108/ilt-04-2019-0125.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to present a numerical model to investigate the dynamic behavior and force coefficients of a compact squeeze film damper with dual film clearances adjusted by an elastic ring, known as elastic ring squeeze film damper (ERSFD). Design/methodology/approach The governing equations of ERSFD as well as the boundary conditions are obtained based on Reynolds equation. A simplified Greenwood–Williamson model is implemented to investigate the contact behavior between the elastic ring and the journal. The interactions between the films and the elastic ring are achiev

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Liu, Yufei, Lang Wu, En Lu, and Jinyong Ju. "Vibration coupling characteristics and grinding force control of an elastic component grinding system." Mechanical Sciences 15, no. 1 (2024): 123–36. http://dx.doi.org/10.5194/ms-15-123-2024.

Повний текст джерела

Анотація:

Abstract. A system's dynamic behavior and vibration mechanism during interaction with a workpiece are the key factors for the stability control of the robotic grinding operation. This paper investigates the vibration coupling effect and grinding force control of the elastic component grinding system (ECGS), which is a multi-dimensional coupling system conveying a dynamic interaction between the elastic component and the grinding device during the grinding process. An elastic constraint model with equivalent stiffness is constructed to describe the dynamic disturbance effect of the elastic vibr

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Wang, Yi-Ze, Feng-Ming Li, and Kikuo Kishimoto. "1905 Band gap characteristics of elastic waves in phononic crystals with thermal stress." Proceedings of The Computational Mechanics Conference 2010.23 (2010): 230–32. http://dx.doi.org/10.1299/jsmecmd.2010.23.230.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Kang, Man, and Jing Lu. "Vibration Characteristics Analysis of an Elastic Cavity." Applied Mechanics and Materials 775 (July 2015): 9–13. http://dx.doi.org/10.4028/www.scientific.net/amm.775.9.

Повний текст джерела

Анотація:

A semi-analytical method was proposed to analyze the vibration characteristics of an elastic cavity. Combining the precise integration method and bent theory of the beam, the transfer relationship of the ends of the beam was derived. Based on the displacement continuity conditions and equilibrium equations of the junction, the conversion relation of the beams was also established. Then, the dynamics control equations of an elastic cavity were assembled by the above relationship and boundary conditions. The comparison with the FEM had verified the accuracy of the present method. This method avo

Стилі APA, Harvard, Vancouver, ISO та ін.

36

SUZUKI, Hiroshi, Ruri HIDEMA, Daichi OKADA, Hikari TAKAHASHI, and Yoshiyuki KOMODA. "Nozzle Injection Characteristics of Visco-Elastic Fluids." Proceedings of the Fluids engineering conference 2018 (2018): OS10–1. http://dx.doi.org/10.1299/jsmefed.2018.os10-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Kim, J., and S. Torquato. "Effective elastic wave characteristics of composite media." New Journal of Physics 22, no. 12 (2020): 123050. http://dx.doi.org/10.1088/1367-2630/abcc99.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Клюшин, Николай, Nikolay Klyushin, Владимир Мелехов, et al. "ELASTIC-DEFORMATION CHARACTERISTICS OF PRESSED WOOD CHARGE." Forestry Engineering Journal 8, no. 4 (2018): 173–80. http://dx.doi.org/10.12737/article_5c1a322375b0c9.59926380.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Fincher, Cole D., Yuwei Zhang, George M. Pharr, and Matt Pharr. "Elastic and Plastic Characteristics of Sodium Metal." ACS Applied Energy Materials 3, no. 2 (2020): 1759–67. http://dx.doi.org/10.1021/acsaem.9b02225.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Chew, M. Y. L. "Curing characteristics and elastic recovery of sealants." Building and Environment 36, no. 8 (2001): 925–29. http://dx.doi.org/10.1016/s0360-1323(00)00047-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Buryachenko, V. A., and A. M. Lipanov. "Effective characteristics of elastic physically nonlinear composites." Soviet Applied Mechanics 26, no. 1 (1990): 9–13. http://dx.doi.org/10.1007/bf00887374.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Strel'nitskij, V. E., B. A. Galanov, O. N. Grigor'ev, and V. I. Trefilov. "Elastic characteristics of diamond-like carbon coatings." Diamond and Related Materials 2, no. 5-7 (1993): 869–72. http://dx.doi.org/10.1016/0925-9635(93)90241-s.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Keerthan, Poologanathan, and Mahen Mahendran. "Elastic shear buckling characteristics of LiteSteel beams." Journal of Constructional Steel Research 66, no. 11 (2010): 1309–19. http://dx.doi.org/10.1016/j.jcsr.2010.05.005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Cluni, Federico, Vittorio Gusella, and Gianluca Vinti. "Masonry elastic characteristics assessment by thermographic images." Meccanica 54, no. 9 (2019): 1339–49. http://dx.doi.org/10.1007/s11012-019-00982-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Yin, Xianjun, and Xiue Wang. "Gripper characteristics of deformed elastic circular rods." Mechanism and Machine Theory 39, no. 1 (2004): 97–100. http://dx.doi.org/10.1016/s0094-114x(03)00106-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Khajehtourian, R., and M. I. Hussein. "Dispersion characteristics of a nonlinear elastic metamaterial." AIP Advances 4, no. 12 (2014): 124308. http://dx.doi.org/10.1063/1.4905051.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Zadvornov, V. N., E. V. Balakina, and N. A. Mishenkov. "Protector Wear Forecasting on Tires Elastic Characteristics." Trenie i Iznos 41, no. 4 (2020): 485–90. http://dx.doi.org/10.32864/0202-4977-2020-41-4-485-490.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Ro, Ruyen. "Elastic Wave Propagation Characteristics at Chiral Interfaces." Japanese Journal of Applied Physics 36, Part 1, No. 4A (1997): 2253–58. http://dx.doi.org/10.1143/jjap.36.2253.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Davydov, S. Yu. "Estimates of the elastic characteristics of graphenes." Physics of the Solid State 51, no. 10 (2009): 2166–68. http://dx.doi.org/10.1134/s1063783409100291.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Mahran, Mohamed, Hani Negm, and Adel El-Sabbagh. "Aero-elastic characteristics of tapered plate wings." Finite Elements in Analysis and Design 94 (February 2015): 24–32. http://dx.doi.org/10.1016/j.finel.2014.09.009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!