Увійти

Готові списки джерел за темами / Electrical efficiency of equipment / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Electrical efficiency of equipment.

Дисертації з теми "Electrical efficiency of equipment"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 дисертацій для дослідження на тему "Electrical efficiency of equipment".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Stulpinas, Saulius. "Aukštrakių nuotekų valymo įrenginių elektros vartojimo efektyvumo tyrimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_164208-32929.

Повний текст джерела

Анотація:

Energetikos inžinerijos magistro darbo tema yra aktuali kraštui integruojantis į vakarus ir tokios pastangos atitinka Europos Sąjungos (ES) direktyvų reikalavimus didinti energetikos efektyvumą jos vartojimo sferoje, Lietuvos energijos taupymo įstatymą, miesto savivaldybės nuostatas taupyti lėšas ir kiek įmanoma mažiau didinti nuotekų šalinimo paslaugos kainą. Elektros energijos vartojimo efektyvumo tyrimo tikslas – nustatyti energijos taupymo galimybes nuotekų valymo įrenginiuose. Darbe apžvelgiamas visas nuotekų valymo technologinis procesas. Atlikta elektros energijos vartojimo analizė. Išm

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Гнатюк, Олександр Русланович, та Oleksandr Hnatiuk. "Розробка заходів підвищення ефективності системи електропостачання ТП 110/10 кВ". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29952.

Повний текст джерела

Анотація:

У дипломній роботі проведено модернізацію трансформаторної підстанції 110/10 кВ «Орданівка» для забезпечення надійності й ефективності постачання електроенергії з мінімальними втратами. Досліджено, що підвищення інтелектуальної складової в обладнанні трансформаторних підстанцій зробило можливим їх виконання цифровими щодо керуючих сигналів, необслуговуючими та самодіагностуючими з високим ступенем надійності. Досліджено, що широкі можливості сучасних засобів АСКОЕ дозволяють успішно вирішувати задачі визначення, аналізу і зменшення втрат електроенергії в електричних мережах, що підвищує надійн

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Петренко, Любомир Васильович, та Lubomуr Petrenko. "Підвищення ефективності функціонування електричних мереж 110/10 кВ". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29659.

Повний текст джерела

Анотація:

У дипломній роботі проведено модернізацію трансформаторної підстанції 35/10 кВ з використанням сучасного комутуючого обладнання для забезпечення надійності й ефективності постачання електроенергії споживачам. Досліджені моделі зменшення втрат потужності, втрат напруги та отримання економічного ефекту в електромережах 110/10 кВ при їх реконструкції на напругу 110/20 кВ. Встановлено, що реконструкція електромереж на напругу 20 кВ з використанням інноваційних технологій дозволить збільшити їх пропускну здатність в 2-2,5 рази в порівнянні з мережами 6-10 кВ в межах тієї ж території, а використання

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Івченко, О. В. "Система автоматизованого розрахунку прогнозованих обсягів енерговитрат при проектуванні технологічного процесу обробки деталей". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82137.

Повний текст джерела

Анотація:

Кваліфікаційна робота магістра становить 97 сторінок, в тому числі 29 рисунків, сім таблиць, бібліографії з 30 джерел на трьох сторінках, одного додатку на восьми аркушах. Виходячи з актуальності й ступеня наукової розробки проблеми, метою дослідження є підвищення енергетичної ефективності технологічних процесів механічної обробки металів шляхом впровадження системи автоматизованого розрахунку прогнозованих обсягів енерговитрат при його проектуванні на основі розроблення універсального методу обчислення значень питомого показника споживання енергії під час проектування операцій механічної обр

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Frimodig, Love. "Energy efficiency in rotating equipment." Thesis, KTH, Marina system, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101905.

Повний текст джерела

Анотація:

This paper reports the findings of the first stage of a study on how the efficiency of a centrifugal pump depends on the eccentricity of the impeller (rotor). The geometry of the pump is based on the ERCOFTAC centrifugal pump that has been used to validate computational fluid dynamics software with laboratory measurements. The pump is modelled using the CFD-code Comsol multi physics (tm) in order to get the pressure and velocity field. From the pressure and velocity field the efficiency and output power for the pump is calculated. The energy efficiency of the same pump with different static ec

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Marangopoulos, Ioannis P. "Ultrasonic cleaning baths : field measurements and cleaning efficiency." Thesis, University of Aberdeen, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342194.

Повний текст джерела

Анотація:

Ultrasonic cleaning baths are routinely used for cleaning dental and surgical instruments. The importance of efficient cleaning prior to sterilisation is great. Micro-organisms can survive the sterilisation process as debris can act as an insulator. The information available on ultrasonic field distributions in cleaning baths is limited. A thermal technique, employing a thermistor probe coated with an absorbing material measures the temperature rise when the field is switched on compared to no sound temperature. Contour plots of the field of the cleaning bath resulted from point-to-temperature

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Zhu, Q. S. "Precision electrical impedance tomography instrumentation." Thesis, Oxford Brookes University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332494.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Fenlon, Teresa Jayne. "Medical applications of electrical impedance measurements." Thesis, University of Surrey, 1992. http://epubs.surrey.ac.uk/773022/.

Повний текст джерела

Анотація:

The utilisation of electrical impedance measurements within the medical profession has broadened greatly since the advent of blood flow analysis in the 1950s. This thesis considers some of the important electrical impedance measurements currently used at a research stage in medicine, with specific emphasis on three major application. These are: the analysis of human body composition, particularly the quantification of body fat, the analysis of gastric motility using electrical impedance epigastrography and electrical impedance tomographic imaging of the abdomen in order to monitor gastric moti

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Stanovskyi, Yevhen. "Energy efficient transport and equipment." Thesis, Дніпропетровський національний університет залізничного транспорту ім. академіка В. Лазаряна, 2017. https://er.knutd.edu.ua/handle/123456789/9142.

Повний текст джерела

Анотація:

The purpose of the article is to emphasise the importance of energy efficient transport and equipment as the world practice demonstrates that increase in energy efficiency is the most effective direction of ensuring energy security of the country.<br>Автори статті приділяють увагу питанню важливості використання енергоощадного транспорту та обладнання, так як світовий досвід демонструє, що посилення заходів з енергозбереження є найбільш ефективним способом гарантування енергобезпеки країни.<br>Авторы статьи уделяют внимание важности проблеме использования энергосберегающего транспорта и оборуд

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Li, Tao. "Analysis of mixing efficiency in continuous polymer processing equipment." Case Western Reserve University School of Graduate Studies / OhioLINK, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=case1062698612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Thouin, Frédéric. "Video-on-demand equipment allocation." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=99545.

Повний текст джерела

Анотація:

Network-based video-on-demand (VoD) deployments are today very limited in scope. The largest deployed libraries are just 0.7% of the global movie and TV-series catalog and peak utilization of VoD targets are 10--15% of broadcast TV peak viewing numbers. Recognizing that libraries and usage may grow, service providers are intensely interested in large-scale content delivery networks that provide content propagation, storage, streaming, and transport. We focus on one of the challenges of VoD network design: resource planning. We describe a method and design tool for the planning of large-scale V

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Syed, Tariq. "Automated test system for ADSL equipment." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ58510.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Mangs, Johan. "On the fire dynamics of vehicles and electrical equipment /." Espoo [Finland] : VTT Technical Research Centre of Finland, 2004. http://www.vtt.fi/inf/pdf/publications/2004/P521.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Benassi, Andrea. "Modeling of Conductors in Electrical Equipment & Sensitivity Studies." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2010. http://amslaurea.unibo.it/955/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Holman, Jason (Jason William) 1974. "Optical networking equipment manufacturing." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/44603.

Повний текст джерела

Анотація:

Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science; in conjunction with the Leaders for Manufacturing Program at MIT, 2001.<br>Includes bibliographical references (leaf 70).<br>Celestica, a global contract manufacturer specializing in printed circuit board assembly and computer assembly, has recently begun manufacturing equipment for the optical networking equipment (ONE) industry. The expansion to include ONE manufacturing requires the development of new sk

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Srajer, V. "Optimization for maximum production of truck/shovel mining system." Thesis, University of Nottingham, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378956.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Westerlund, Per. "Condition measuring and lifetime modelling of electrical power transmission equipment." Licentiate thesis, KTH, Elektroteknisk teori och konstruktion, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-167136.

Повний текст джерела

Анотація:

The electric grid is important in modern society, so the outages should be few. The transmission grid should have a real high availability, since it transports electrical energy across the country. Then, it is difficult to plan outages for maintenance and installation. This thesis lists twenty surveys about failures of circuit breakers and disconnectors, with data about the cause and the lifetime. It also contains a survey of about forty condition-measuring methods for circuit breakers and disconnectors, mostly applicable to the electric contacts and the mechanical parts. As there is no pub

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Fong, Hui Ni Grace. "Improving and maintaining the operational efficiency of a semiconductor equipment manufacturing warehouse." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101336.

Повний текст джерела

Анотація:

Thesis: M. Eng. in Manufacturing, Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 85-86).<br>The present work addresses an operational inefficiency problem at a semiconductor equipment manufacturing warehouse, Varian Semiconductors Associates and Equipment (VSEA). This problem is important because if unresolved, the warehouse is unable to meet the part delivery time target of 24 hours during the busy period. The downstream effects of the late part delivery are delayed produ

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Gürsoy, Nevin. "A study on energy efficiency in system development environments and related equipment." Thesis, KTH, Energiteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-211710.

Повний текст джерела

Анотація:

The modern society and its basic functions are dependent on different type of energy carriers. The usage of electronic appliances and computers in particular, has varying impact on energy usage, which in turn influence the performance of the cooling systems and the experienced thermal climate conditions in buildings. This study analyzes the energy usage within system development environments at Saab facility in Järfälla. The work process was divided in two parts; identifying the current energy consumption level in the system development environments and investigating potential energy efficienc

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Martin, Damien W. "Fault detection in manufacturing equipment using unsupervised deep learning." Thesis, Massachusetts Institute of Technology, 2021. https://hdl.handle.net/1721.1/130698.

Повний текст джерела

Анотація:

Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, February, 2021<br>Cataloged from the official PDF of thesis.<br>Includes bibliographical references (pages 87-90).<br>We investigate the use of unsupervised deep learning to create a general purpose automated fault detection system for manufacturing equipment. Unexpected equipment faults can be costly to manufacturing lines, but data driven fault detection systems often require a high level of application specific expertise to implement and continued human oversight. Collecting la

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Capelle, Michael J. (Michael John). "Improving equipment performance through queueing model applications." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/38050.

Повний текст джерела

Анотація:

Thesis (M.S.)--Massachusetts Institute of Technology, Sloan School of Management, 1995, and Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.<br>Vita.<br>Includes bibliographical references (p. 73-74).<br>by Michael J. Capelle.<br>M.S.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Latief, Tauriq. "The design of a two-element radio interferometer using satellite TV equipment." Master's thesis, Faculty of Engineering and the Built Environment, 2021. http://hdl.handle.net/11427/33756.

Повний текст джерела

Анотація:

This research presents the design of a two-element radio interferometer capable of performing complex correlation. With the development of sophisticated radio astronomy instruments, particularly in South Africa, there is a need to develop an affordable educational instrument which can be used to demonstrate the fundamental concepts of radio interferometry to university students. The mass production of satellite TV equipment has resulted in relatively sensitive radio frequency (RF) equipment such as parabolic reflector dishes and low-noise block down-converters (LNBs) being available at signifi

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Cosgrave, Joseph Anthony. "Acoustic-optic monitoring of electrical power equipment using chromatic signal processing." Thesis, University of Liverpool, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263845.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Marra, Alessandra. "Innovative treatments for resource recovery from waste electrical and electronic equipment." Doctoral thesis, Universita degli studi di Salerno, 2017. http://hdl.handle.net/10556/2619.

Повний текст джерела

Анотація:

2015 - 2016<br>The ever-expanding population, the increasing consumption of resources and the shortage of primary raw materials have addressed the transition of waste management strategies from the linear model based on the “wear and tear” on a circular approach aiming at preventing waste and recycling materials. In this view, the attention has been focused on the use of anthropogenic stock resources in place of virgin materials as promoted by the concept of “urban mining”. Waste electrical and electronic equipment (WEEE) is regarded as the backbone stream in urban mining. It represents the wa

Стилі APA, Harvard, Vancouver, ISO та ін.

25

DING, TONGYU. "Worst-Case Analysis of Electrical and Electronic Equipment via Affine Arithmetic." Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2594556.

Повний текст джерела

Анотація:

In the design and fabrication process of electronic equipment, there are many unkown parameters which significantly affect the product performance. Some uncertainties are due to manufacturing process fluctuations, while others due to the environment such as operating temperature, voltage, and various ambient aging stressors. It is desirable to consider these uncertainties to ensure product performance, improve yield, and reduce design cost. Since direct electromagnetic compatibility measurements impact on both cost and time-to-market, there has been a growing demand for the availability of too

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Asadanin, Boris. "Optimizing Mobile Phone Free Fall Drop Test Equipment - Precision, Repeatability, and Time Efficiency." Thesis, Linköping University, Department of Computer and Information Science, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-16925.

Повний текст джерела

Анотація:

<p></p><p>Free fall drop testing is an important part of the development of commercial electronic components and devices. In the process of optimizing the quality of their entire product range, Sony Ericsson Mobile Communications AB have decided to review their free fall drop test equipment with the goal of increasing the precision, repeatability, and time efficiency of their drop test applications. In regard to the free fall drop test principle a robot system with management software, named Doris Drop Test Sys

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Ho, Chun-Yu. "Growth and labor composition in the U.S. manufacturing : the role of equipment quality /." View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?ECON%202003%20HO.

Повний текст джерела

Анотація:

Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2003.<br>Includes bibliographical references (leaves 28-30). Also available in electronic version. Access restricted to campus users.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Chan, Walker R. "High efficiency thermophotovoltaic microgenerators." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99773.

Повний текст джерела

Анотація:

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2015.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 137-150).<br>We proposed, designed, and demonstrated a first-of-a-kind millimeter-scale thermophotovoltaic (TPV) system using a metallic microburner, photonic crystal (PhC) emitter, and low bandgap TPV cells. Many technologie

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Saad, S. "Efficiency of mining electrical variable speed drive systems." Thesis, University of Nottingham, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.381103.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Lysunenko, Natalia, Mykola Brychevskyi, Ihor Polishko, and Valentine Mokiychuk. "Electrical efficiency of anode- and electrolyte-supported SOFCs." Thesis, Institute of Technical Sciences of SASA, 2016. http://er.nau.edu.ua/handle/NAU/28421.

Повний текст джерела

Анотація:

Solid oxide fuel cell is considered now as a promising technology for reliable and environmentally safe energy generation. SOFC convert chemical energy of fuel and oxidant directly into electrical energy through electrochemical reactions.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Herndler, Barbara Linda. "Non-intrusive efficiency estimation of induction machines." Master's thesis, University of Cape Town, 2010. http://hdl.handle.net/11427/11423.

Повний текст джерела

Анотація:

Includes abstract.<br>Includes bibliographical references (leaves 189-194).<br>Determining the efficiency of an in-service motor requires the motor to be decoupled from its load or the use of highly specialised equipment which is often unavailable on site. In order to assess the efficiency of an induction machine, it is subjected to numerous testing procedures established by recognised international testing standards. These procedures are considered to be time consuming, manually intensive and disruptive to the machine’s operation. Also, the efficiency of the machine quoted after these laborat

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Muqdisi, Menhal. "Development of equipment for measuring Ocular Micro-Tremor." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-5718.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Cheung, Grace M. "Development of an automated efficiency and loss measurement system for high-efficiency power converters." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/61150.

Повний текст джерела

Анотація:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 105).<br>When building a high performance power converter system, characterization becomes a significant task in and of itself. This thesis addresses the development of an automated efficiency and loss measurement system for high-efficiency power converters. The design, construction, calibration, and evaluation of such a measurement setup is described, including development of software to control

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Toor, Paramveer Singh. "Improving operational efficiency of a semiconductor equipment manufacturing warehouse through strategic allocation of parts." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101477.

Повний текст джерела

Анотація:

Thesis: M. Eng. in Manufacturing, Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 75).<br>The work addresses the operational inefficiency problem in a semiconductor equipment manufacturing warehouse of Applied Material's Varian Semiconductor Business Unit. At Varian, the target part delivery time from the warehouse to the production floor is 24 hours. However, during busy periods, parts are not delivered on time. Late part delivery from the warehouse to the production floor

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Bladh, Anna. "System Design of Automated Test Equipment for Electrical Control Units in Trucks." Thesis, KTH, Mikro- och nanosystemteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-157531.

Повний текст джерела

Анотація:

The high level of complexity in today’s electronic systems increases the demands on an advanced validation and verification process. Automated testing facilitates and improves regression testing (rerun of previously executed test cases to uncover and track new bugs) with increased coverage and reduced costs as a result. A vehicle contains multiple control units, each responsible for a specific part: the engine, brakes, gearbox etc. These intelligent systems must be tested thoroughly to ensure correct behavior - both under normal circumstances and when the vehicle is exposed to unexpected even

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Sorger, Luís Gonçalo Lourenço. "Characterization of processed materials by electrical currents: development of equipment and applications." Master's thesis, Faculdade de Ciências e Tecnologia, 2014. http://hdl.handle.net/10362/12180.

Повний текст джерела

Анотація:

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica<br>Structural characterization of welded or processed materials is critical for a correct assessment of their properties. Microstructural analysis by optical microscopy provides information to identify the distinctive zones, their extent and the major transformations induced. For structural analysis, hardness is the simplest property to measure, providing information on the existence of ductile or brittle zones in the material. Furthermore, it can be qualitatively correlated to yield strength. However, these techniques are t

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Chin, Hok Ling Hawkins. "Efficiency externalities of foreign direct investment in China's industrial sector." HKBU Institutional Repository, 2012. https://repository.hkbu.edu.hk/etd_ra/1468.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Russell, Kevin Joseph. "Design and analysis of shipboard electrical distribution." Thesis, This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-03242009-040322/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Patel, Anand Kishorbhai. "Investigation of a Novel Vapor Chamber for Efficient Heat Spreading and Removal for Power Electronics in Electric Vehicles." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984206/.

Повний текст джерела

Анотація:

This work investigated a novel vapor chamber for efficient heat spreading and heat removal. A vapor chamber acting as a heat spreader enables for more uniform temperature distribution along the surface of the device being cooled. First, a vapor chamber was studied and compared with the traditional copper heat spreader. The thickness of vapor chamber was kept 1.35 mm which was considered to be ultra-thin vapor chamber. Then, a new geometrical model having graphite foam in vapor space was proposed where the graphite foam material was incorporated in vapor space as square cubes. The effects of in

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Lazarevic, Ljubica. "Improving the efficiency and accuracy of nocturnal bird Surveys through equipment selection and partial automation." Thesis, Brunel University, 2010. http://bura.brunel.ac.uk/handle/2438/4155.

Повний текст джерела

Анотація:

Birds are a key environmental asset and this is recognised through comprehensive legislation and policy ensuring their protection and conservation. Many species are active at night and surveys are required to understand the implications of proposed developments such as towers and reduce possible conflicts with these structures. Night vision devices are commonly used in nocturnal surveys, either to scope an area for bird numbers and activity, or in remotely sensing an area to determine potential risk. This thesis explores some practical and theoretical approaches that can improve the accuracy,

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Veale, Kirsty Lynn. "Power efficiency of industrial equipment." Thesis, 2011. http://hdl.handle.net/10413/5084.

Повний текст джерела

Анотація:

Power conservation has become a high priority to South African industries due to recent environmental assessments and electricity price hikes. This research aims to demonstrate to Industry the many simple and cost effective ways to increase their industrial efficiency with simple modifications, as well as making them more aware of common assembly errors that significantly increase power consumption. This has been accomplished with the design, construction and testing of a test rig capable of producing the desired test results which simulate Industry usage. A test rig was required to test certa

Стилі APA, Harvard, Vancouver, ISO та ін.

42

HUANG, WEN-XU, and 黃文旭. "Cross section analysis of operating efficiency for electrical and electronic machinary and equipment industry." Thesis, 1991. http://ndltd.ncl.edu.tw/handle/76551051657340136883.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

XU, PEI-GEN, and 徐培根. "An analysis of operating efficiency for electrical and electronic machinery and equipment industries between Taiwan and China." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/81435784456858607330.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Ruttanapaibooncharoen, Surin. "Improved efficiency in medium-power flyback converters." Thesis, 2003. http://hdl.handle.net/1957/30228.

Повний текст джерела

Анотація:

Switch-mode power supplies (SMPS's) not only convert energy, they also consume it. Typical operational efficiencies are approximately 25 to 60% for linear power supplies, and approximately 50-90% for switching power supplies. This means that products whose end-use electronics are dc, such as televisions and DVD players, could consume 50% less power when operating if the power supply were upgraded from 40% efficiency to 80% efficiency. Savings can occur not only from using SMPS's instead of linear power supplies, but also from specifying highly efficient switching power supplies. In many cases,

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Jayan, M. V. "Modeling Of Dust Loaded Electrical Characteristics And Collection Efficiency Of Industrial Electrostatic Precipitators." Thesis, 2009. https://etd.iisc.ac.in/handle/2005/965.

Повний текст джерела

Анотація:

With the increase in population and industrial growth, the need for power has increased manifold. A major share of India’s power generation is coal-based generation. Thermal power generation through coal combustion produces minute particles of ash that causes serious environmental problems. Most of the thermal power stations in India use bituminous coal and produce large quantities of fly ash. Fly ash is produced primarily by thermal power plants and, to a lesser extent, by cement and steel plants and railways. This poses problems in the form of land use, health hazards, and environmental dang

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Jayan, M. V. "Modeling Of Dust Loaded Electrical Characteristics And Collection Efficiency Of Industrial Electrostatic Precipitators." Thesis, 2009. http://hdl.handle.net/2005/965.

Повний текст джерела

Анотація:

With the increase in population and industrial growth, the need for power has increased manifold. A major share of India’s power generation is coal-based generation. Thermal power generation through coal combustion produces minute particles of ash that causes serious environmental problems. Most of the thermal power stations in India use bituminous coal and produce large quantities of fly ash. Fly ash is produced primarily by thermal power plants and, to a lesser extent, by cement and steel plants and railways. This poses problems in the form of land use, health hazards, and environmental dang

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Chen, Cheng-Hung, and 陳正宏. "Equipment Automatic Program Extension in Wafer Fabrication for Overall Equipment Efficiency (OEE) Research." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/17475414089034273664.

Повний текст джерела

Анотація:

碩士<br>元智大學<br>資訊工程學系<br>93<br>Equipment Automatic Program (EAP) must be a process and quality control program in above 8-inch wafer fab, EAP check every action before each lot process, it control the recipe and equipment operation. If it found out exception, this lot will stop to process.Thus, it can avoid miss-operation and all wafer in this lot usable. In the measure tools, it can collect wafer measure data and response them to Manuafacture Execution System (MES) to analysis data. Tthis method only can control lot to lot monitor. If the equipment (EQP) is instable, then processed wafer mu

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Lai, You-Peng, and 賴有朋. "Research on Improvement of Equipment maintenance efficiency Tips." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/40194757564536657535.

Повний текст джерела

Анотація:

碩士<br>元智大學<br>管理碩士在職專班<br>104<br>This study employs the method of case study to explore how to enhance the efficiency of maintenance. In our study the maintenance management is viewed as a base to ensure that the equipment would operate normally, the maintenance rate is reduced, and the status of equipment maintenance is efficiently controlled due to preventive maintenance. The case in our study does not use standard operation procedure for equipment maintenance which led to the problems of management and maintenance. Hence, we suggest that the equipment maintenance management processes be sta

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Pao, Chien-kuo, and 鮑建國. "The strategy to improve the equipment maintenance efficiency." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/42091809487833488315.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>工業管理系<br>99<br>Equipments’ maintenance is an advanced mode and concept for adjusting the modern manufacturing technology and explosive competition in global markets. This article learns from the status of related equipment maintenance managing system and the development of relevant experience at home and abroad. It explores further the overall architecture and the contents of maintenances. At the same time, these activities’ reasons which influence the efficiency of enterprises can help us understand the property of machines. Protecting and preparing the equipments’ maintenan

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Cheng, Juli, and 鄭如利. "Competitiveness and Productive Efficiency Analysis For Semiconductor Equipment Industry." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/16524998072988499212.

Повний текст джерела

Анотація:

碩士<br>國立清華大學<br>高階經營管理碩士在職專班<br>101<br>Semiconductor is a strategically important industry serving as a driver, enabler and indicator of technological progress. The coming wafer scale-ups will bring disruptions and dislocations in the semiconductor industry including increased industrial consolidation , new competitive standards and rules defined by those driving the wafer transition. It is important for players within the industry to be well positioned with good competitiveness and productive efficiency. In this paper, Juli focus on semiconductor equipment industry. It’s competitiveness was

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!