Готові списки джерел за темами / Fiber characteristic

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Fiber characteristic"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fiber characteristic".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Fiber characteristic"

Chiu, Hsuan-Hao, and Wen-Bin Young. "Characteristic study of bamboo fibers in preforming." Journal of Composite Materials 54, no. 25 (2020): 3871–82. http://dx.doi.org/10.1177/0021998320923144.

Повний текст джерела

Анотація:

The bamboo fiber preforming is an important process in the liquid composite molding for fabricating fiber reinforced composites with non-planar geometric shapes. This study investigated the deformation and spring back behaviors of the single bamboo fiber and bamboo fiber mat under a simple bending preforming test. The effects of the heating temperature and moisture content of bamboo fibers were studied during the tests. The result showed that the [0/90] bamboo fiber mats could be perfectly preformed without spring back after bending under the conditions of a wet and high temperature conditions

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Zhou, Yong Yang, Tengzhou Xu, Junfeng Hu, and Shaoqiang Liu. "Morphologies and characteristic of glass fiber suspensions basing on various beating speeds." Materials Express 9, no. 9 (2019): 1043–48. http://dx.doi.org/10.1166/mex.2019.1609.

Повний текст джерела

Анотація:

Glass fibers commonly flocculate in suspensions and slurries, which can be largely prevented by a beating process. In this paper, morphologies and characteristics of glass fiber suspensions resulting from various beating speeds are explored. By increasing the speed (ranging from 1500 revolutions to 12000 revolutions), glass fibers can be translated, rotated, bended and broken, which leads the drainage resistances of glass fiber suspensions increase dramatically from 19.5 °SR to 23.5 °SR, then fluctuate and settle close to 22.5 °SR. Decreasing the fiber length leads to reduction in fiber–fiber

Стилі APA, Harvard, Vancouver, ISO та ін.

C, Darshan, Varun K. S, and Swamy S. R. "Environmental Impact Assessment of Natural Vs Synthetic Fiber Reinforcement in Polymer Composites." International Journal for Research in Applied Science and Engineering Technology 12, no. 11 (2024): 1666–79. http://dx.doi.org/10.22214/ijraset.2024.65423.

Повний текст джерела

Анотація:

Abstract: This research examines the environmental influences of natural and synthetic fiber reinforcement in polymer composites specifically the aspects of greenhouse gas emissions, energy demands, biodegradability, and mechanical characteristics. Some organic fibers like jute, hemp, and flax are more eco-friendly than synthetic fiber because during the process of growing, they need less energy and they also absorb carbon dioxide. On the other hand, synthetic products such as glass and carbon fibre, which exhibit superior mechanical properties are disadvantageous in this context as they are e

Стилі APA, Harvard, Vancouver, ISO та ін.

Pukharenko, Yu V., D. A. Panteleev, and M. I. Zhavoronkov. "Influence of fiber type and matrix composition on adhesive strength in fiber reinforced concrete." Russian Automobile and Highway Industry Journal 19, no. 3 (2022): 436–45. http://dx.doi.org/10.26518/2071-7296-2022-19-3-436-445.

Повний текст джерела

Анотація:

Introduction. The purpose of the article is to determine the influence of the steel fiber profile and the composition of the matrix on their adhesion in dispersed reinforced concrete.Materials and methods. Studies have been carried out using the test methods set out in national standards. To determine the characteristics of the adhesion strength of fibers with a matrix, an original technique developed at SPbGASU was used.Results. The degree of influence of the geometric shape of steel fibers – anchor and wave profile on the adhesion strength characteristic is determined. The adhesion strength

Стилі APA, Harvard, Vancouver, ISO та ін.

Parasakthibala, Ms G., and Mrs A. S. Monisha. "A Review on Natural Fibers; Its Properties and Application Over Synthetic Fibers." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (2022): 1894–97. http://dx.doi.org/10.22214/ijraset.2022.46530.

Повний текст джерела

Анотація:

Abstract: Fibre is a long, thin strand or thread of material made by weaving or knitting threads together. Fibre is a hair like strand of material. A fibre is the smallest visible unit of any textile product. Fibres are flexible and may be spun into yarn and made into fabric. Natural fibres are taken from animals, vegetables or mineral sources. A few examples of widely used natural fibres include animal fibre such as wool and silk vegetables fibres, especially cotton and flax and asbestos, a mineral. Natural fibers are more important part in our human environment. Natural fibers are ecofriendl

Стилі APA, Harvard, Vancouver, ISO та ін.

Shahidan, Shahiron, Mustaqqim Abdul Rahim, Nik Suharliza Nik Zol, Muhammad Azizi Azizan, and Isham Ismail. "Properties of Steel Fiber Reinforcement Concrete with Different Characteristic of Steel Fiber." Applied Mechanics and Materials 773-774 (July 2015): 28–32. http://dx.doi.org/10.4028/www.scientific.net/amm.773-774.28.

Повний текст джерела

Анотація:

Currently in concrete technology a lot of materials were introduced to improve the quality and properties of concrete. Additional materials include the use of steel fibers into the concrete mix. With the used of steel fibers, it can enhance the strength of the concrete. In this research, two parameters will be investigated which is the volume friction of the steel fiber and the length of the steel fiber. End-hooked steel fiber with the length of 33 mm and 50 mm and the percentage of steel fiber 0.5 %, 1.0 % and 1.5 % used in this research. The size of the mold used is 100 mm x 100 mm x 100 mm.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Hongjie, Zhiqiang Li, Shuo Yang, et al. "Comparison of some key parameters contributing to lignocellulosic fiber deformation behavior by a mathematical model." BioResources 14, no. 2 (2019): 4136–45. http://dx.doi.org/10.15376/biores.14.2.4136-4145.

Повний текст джерела

Анотація:

Deformation behavior is an important fundamental characteristic of lignocellulosic fibers; it affects the application range of fiber materials and the properties of fiber-based products. For instance, the density of a paper sheet depends on the degree to which the wet fibers are able to conform to the shapes of adjacent fibers during pressing and drying. In this study, a model for revealing the contribution of inherent characteristics of lignocellulosic fiber to its deformation behavior was developed and compared with other general models. The response sensitivities of cross-sectional paramete

Стилі APA, Harvard, Vancouver, ISO та ін.

Germanovich, O. "THE STUDY OF ORGANOLEPTIC CHARACTERISTICS OF SMOKED SAUSAGES WITH THE USE OF DIFFERENT DIETARY FIBER." Topical issues of processing of meat and milk raw materials, no. 14 (December 14, 2020): 214–20. http://dx.doi.org/10.47612/2220-8755-2019-14-214-220.

Повний текст джерела

Анотація:

Vegetable fibers from fruits and cereals are increasingly used in the food industry. Dietary fiber has the characteristic of insoluble fiber components that are technologically and nutritionally effective. This paper reflects the use of vegetable fibers in raw smoked sausages, describes possible changes in the properties of the product and assesses the feasibility of using fibers. It was found that wheat fiber in comparison with oat fiber, peach fiber, Apple fiber, orange fiber, carrot fiber, tiger nut fiber – allows you to produce fiber-rich products that taste, smell and texture

Стилі APA, Harvard, Vancouver, ISO та ін.

Ma, Shun Bin. "Infrared Spectrum Test and Analysis of Regenerated Cellulose Fibers." Advanced Materials Research 671-674 (March 2013): 1954–57. http://dx.doi.org/10.4028/www.scientific.net/amr.671-674.1954.

Повний текст джерела

Анотація:

In this paper, the infrared spectrum of regenerated fibers have been tested and analyzed, such as Lyocell fiber, Modal fiber, regenerated cellulose fiber and Bamboo pulp fiber. Test results shown that: Lyocell fiber, Modal fiber, Bamboo pulp fiber are similar to viscose fiber in their infrared spectrogram, but the transmittance of characteristic absorption peaks of them are different.

Стилі APA, Harvard, Vancouver, ISO та ін.

Saleh, Sabah M. "The Effect of Matrix and Fiber Type on Their Fatigue Characteristic in a Composite Material." Tikrit Journal of Engineering Sciences 17, no. 4 (2010): 56–66. http://dx.doi.org/10.25130/tjes.17.4.11.

Повний текст джерела

Анотація:

The objective of this research is to study the effect of the resin type and fibers in composite material on fatigue behavior by using two types of fibers and resin. The resin types are epoxy and polyester type and the fiber types are uniform carbon fiber (90-0) and particle carbon fiber type . Where The specimen are made for four slates from these materials ,in 30% volume fraction for the uniform carbon fiber (90-0), and 5% for particle carbon fiber. These specimen are cut in proper dimension according to the properties of fatigue testing device. At least These specimens are tested in order to

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Fiber characteristic"

Zhou, Zichao. "Characteristic Study of Noise Reduction of Brillouin Random Fiber Lasers." Thesis, Université d'Ottawa / University of Ottawa, 2021. http://hdl.handle.net/10393/42385.

Повний текст джерела

Анотація:

Random fiber lasers, a new type of fiber laser that uses disordered medium to provide distributed feedback, have drawn considerable interest in the photonics community over the past ten years. Stimulated Brillouin scattering (SBS), with a typical narrow spectral width of ~100 MHz, provides an important gain mechanism for random fiber lasers. Brillouin random fiber laser (BRFL) has shown excellent advantages in generating highly coherent photons and in ultrasound sensing. However, the accompanied large intensity noise in BRFLs hinders its further performance improvement and practical applicatio

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Hainan. "Topology of fiber bundles." Thesis, Kansas State University, 2014. http://hdl.handle.net/2097/18185.

Повний текст джерела

Анотація:

Master of Science Department of Mathematics David Auckly This report introduces the fiber bundles. It includes the definitions of fiber bundles such as vector bundles and principal bundles, with some interesting examples. Reduction of the structure groups, and covering homotopy theorem and some specific computation using obstruction classes, Cech cohomology, Stiefel-Whitney classes, and first Chern classes are included.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bairu, Yan. "Morphology-Retaining Carbonization of Helical Aromatic Conjugated Polymers and Their Characteristic Properties." 京都大学 (Kyoto University), 2017. http://hdl.handle.net/2433/225633.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alexa, Jan. "Využití polarizace světla při filtraci optického signálu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376944.

Повний текст джерела

Анотація:

This master thesis deals with the possibility of separation of useful signal from noise using polarization of laser radiation. This thesis is structured into 5 thematic units. The first unit is focused on laser radiation and its properties. The second part contains a deeper focus on the polarization of radiation, its description and the possibilities of measuring the polarization states. The third part of the thesis is devoted to the design of the measuring chains and identification of used elements. Chapter four contains measurement of status of the polarization and its results. The last chap

Стилі APA, Harvard, Vancouver, ISO та ін.

Fedorenko, O. O., and J. K. Warchoł. "Structural and mass transfer characteristics of carbon-fiber materials." Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/6750.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kazama, Elizabeth Haruna [UNESP]. "Perdas na colheita mecanizada de algodão em variabilidade espacial e em função de velocidades de colheita." Universidade Estadual Paulista (UNESP), 2016. http://hdl.handle.net/11449/137798.

Повний текст джерела

Анотація:

Submitted by ELIZABETH HARUNA KAZAMA null (bethkazama@hotmail.com) on 2016-04-05T19:43:23Z No. of bitstreams: 1 Dissertação_Elizabeth_Haruna_Kazama.pdf: 2591001 bytes, checksum: b6af06ca83c4e70605f88b2a36377803 (MD5) Approved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-04-06T19:15:35Z (GMT) No. of bitstreams: 1 kazama_eh_me_jabo.pdf: 2591001 bytes, checksum: b6af06ca83c4e70605f88b2a36377803 (MD5) Made available in DSpace on 2016-04-06T19:15:35Z (GMT). No. of bitstreams: 1 kazama_eh_me_jabo.pdf: 2591001 bytes, checksum: b6af06ca83c4e70605f88b2a3

Стилі APA, Harvard, Vancouver, ISO та ін.

Silva, Nelson Antonio. "Uma versão parametrizada do teorema de Borsuk-Ulam." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/55/55135/tde-12042011-082846/.

Повний текст джерела

Анотація:

O teorema clássico de Borsuk-Ulam nos dá informações à respeito de aplicações \'S POT. n\' \'SETA\' \'R POT. n\', no qual \'S POT. n\' é um \'Z IND. 2\' -espaço livre. O teorema afirma que existe pelo menos uma órbita que é enviada em um único ponto em \'R POT. n\'. Dold [9] estendeu este problema para o contexto de fibrados, considerando aplicações f : S (E) \'SETA\' \'E POT. \'prime\'\' nos quais preservam fibras; aqui, S (E) denota o espaço total do fibrado em esfera sobre B associado ao fibrado vetorial E \'SETA\' B e \'E POT. \'prime\'\' \'SETA\' B é o outro fibrado vetorial. O obje

Стилі APA, Harvard, Vancouver, ISO та ін.

Reyier, Österling Sofia. "Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps." Doctoral thesis, Mittuniversitetet, Avdelningen för kemiteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-24175.

Повний текст джерела

Анотація:

Mechanical pulps are used in paper products such as magazine or news grade printing papers or paperboard. Mechanical pulping gives a high yield; nearly everything in the tree except the bark is used in the paper. This means that mechanical pulping consumes much less wood than chemical pulping, especially to produce a unit area of printing surface. A drawback of mechanical pulp production is the high amounts of electrical energy needed to separate and refine the fibers to a given fiber quality. Mechanical pulps are often produced from slow growing spruce trees of forests in the northern hemisph

Стилі APA, Harvard, Vancouver, ISO та ін.

Yu, Charles Xiao 1973. "Noise characteristics of the fiber ring lasers." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/38139.

Повний текст джерела

Анотація:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1996. Includes bibliographical references (leaves 62-67). by Charles Xiao Yu. M.Eng.

Стилі APA, Harvard, Vancouver, ISO та ін.

Tripathi, Sudhir Kumar. "Liquefaction Characteristics of Sand Reinforced with Small Percentages of Polypropylene FIber." OpenSIUC, 2018. https://opensiuc.lib.siu.edu/theses/2435.

Повний текст джерела

Анотація:

Liquefaction of soil is one of the major contributing factors for damages of infrastructures and utility services during earthquake. Liquefaction occurs when short strong shaking creates undrained loading condition in saturated soil deposit thereby increases pore water pressure, which eventually equals the effective confining pressure resulting in significant reduction in shear strength and bearing capacity of soil deposit. Several studies have been conducted to investigate the effect of polypropylene fiber on sand deposit as a measure to prevent liquefaction but most of them are based on stat

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Fiber characteristic"

Phillips, Anthony V. A topological Chern-Weil theory. American Mathematical Society, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

United States. National Aeronautics and Space Administration, ed. Damping characteristics of damaged fiber composite components. National Aeronautics and Space Administration, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Blisard, William Noel. Dietary fiber: Effects of socioeconomic characteristics and knowledge. U.S. Dept. of Agriculture, Economic Research Service, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hideo, Arakawa, Namekawa Takashi, and United States. National Aeronautics and Space Administration., eds. Reciprocating sliding wear characteristics of copper-carbon fiber composites. National Aeronautics and Space Administration, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Krishnasamy, Senthilkumar, Mohit Hemath Kumar, Jyotishkumar Parameswaranpillai, Sanjay Mavinkere Rangappa, and Suchart Siengchin, eds. Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8327-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kanellopoulos, Vasilios Nichalaou. Hygrothermal characteristics of carbon fibre reinforced plastics. University of Salford, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Krieger, Maggie. Secrets of the Andean alpaca: Assessing fiber characteristics and conformation. Saltspring Island Llamas & Alpacas, 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xoxa, Vasillaq. Investigating the shear characteristics of high performance fiber reinforced concrete. National Library of Canada, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jackson, Douglas Anthony. The thermal expansion characteristics of fibre reinforced thermoplastics. University of Salford, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rémy, Bouillie, Society for Photo-optical Instrumentation Engineers., Association nationale de la recherche technique., and International Technical Symposium on Optical and Electro-optical Applied Science and Engineering (2nd : 1985 : Cannes, France), eds. Optical fiber characteristics and standards: 25-27 November 1985, Cannes, France. SPIE--the International Society for Optical Engineering, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Fiber characteristic"

Weik, Martin H. "fiber global dispersion characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6899.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Weik, Martin H. "fiber global loss characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6900.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Weik, Martin H. "fiber global attenuation rate characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6898.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Weik, Martin H. "optical fiber global dispersion characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_13020.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Weik, Martin H. "Fiber optic global attenuation-rate characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6957.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Weik, Martin H. "optical fiber global attenuation-rate characteristic." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_13019.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Némethi, András, and Ágnes Szilárd. "The Proof of the Characteristic Polynomial Formulae." In Milnor Fiber Boundary of a Non-isolated Surface Singularity. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23647-1_17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Saravanan, A., R. Naveen Kumar, and A. S. Tharun Sankar. "Characteristic Analysis of Nylon Fiber Reinforced Epoxy Composite Materials." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4147-4_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bai, Bing, Yubin Guo, Xiaohui Zhao, Jiayu Huo, and Tiegang Sun. "Temperature and Strain Characteristic Analysis of Fiber Bragg Grating Sensor." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34528-9_67.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Némethi, András, and Ágnes Szilárd. "The Characteristic Polynomial of ∂F via P # and $${P}^\sharp_{j}$$." In Milnor Fiber Boundary of a Non-isolated Surface Singularity. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23647-1_16.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Fiber characteristic"

Hui, Fei, Maochun Li, Xiaoming Zhao, and Weiqiang Sun. "Polarization characteristic measurement method for hollow-core microstructure fiber coil." In Tenth Symposium on Novel Optoelectronic Detection Technology and Applications, edited by Chen Ping. SPIE, 2025. https://doi.org/10.1117/12.3057054.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mizuno, Yasutaka, Hiroshi Uemura, Tomoya Saeki, Keiji Tanaka, and Katsumi Uesaka. "200 mW High-Power Tolerant Vertically-Coupled Beam-Expanding Lens (VCBEL) for PIC to Fiber Coupling." In Optical Fiber Communication Conference. Optica Publishing Group, 2025. https://doi.org/10.1364/ofc.2025.m4j.3.

Повний текст джерела

Анотація:

We present vertically-coupled lens for CPO. Coupling efficiency of -1.8 dB and 1 dB alignment tolerance of ±10 μm were achieved, while demonstrating linear characteristic and long-term reliability of 3D-printed resin lens at 200 mW.

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Yuanhong, Liangya Du, Wei Jin, and Shuai Li. "Measuring Method of Depolarizer Characteristic Parameters in Depolarized Fiber Optic Gyroscope." In 2024 IEEE 16th International Conference on Advanced Infocomm Technology (ICAIT). IEEE, 2024. https://doi.org/10.1109/icait62580.2024.10807957.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Yue-hong, Hai Qi, and Guang-xiang Wang. "Temperature characteristic of fiber Bragg grating." In Mechanical Engineering and Information Technology (EMEIT). IEEE, 2011. http://dx.doi.org/10.1109/emeit.2011.6023934.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kawai, Akira, Masanori Nakamura, Takayuki Kobayashi, and Yutaka Miyamoto. "4-Dimensional IQ Characteristic Estimation for Polarization-multiplexed Coherent Transceivers." In Optical Fiber Communication Conference. Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofc.2022.m1h.2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hou, Lantian, Xinqi Wang, Zhongshan Li, and Yingzhi Sun. "Transmission characteristic of GeO2 hollow-core fiber." In Photonics China '96, edited by Kam T. Chan, Shuisheng Jian, and Franklin F. Tong. SPIE, 1996. http://dx.doi.org/10.1117/12.252022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yasuda, Nathan K., David S. Schulman, David J. Traina, et al. "Investigation of Energy Absorption Characteristic of Ceramic Fiber Reinforced Elastomer Composites." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72103.

Повний текст джерела

Анотація:

Head protection from impact events for participants in contact sports or other activities is of current interest. Custom designed and synthesized material systems which effectively reduce the peak force transmitted to the individual and absorb a substantial portion of the impact energy are highly desirable. In applications in which recovery time of the material is not a primary concern, multiple means of energy absorption, including deformation and fracturing of the reinforcement material, may be suitable. In the present study, new composite material systems using a urethane elastomer matrix r

Стилі APA, Harvard, Vancouver, ISO та ін.

Changjia, Wang, Li Zhengying, Gui Xin, et al. "A large capacity multiplexing distributed sensing based on randomly distributed characteristic parameters FBG array." In Optical Fiber Sensors. OSA, 2018. http://dx.doi.org/10.1364/ofs.2018.tue11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Takahashi, Masanobu, Shuichi Tai, Kazuo Kyuma, and Koichi Hamanaka. "Effect of Reflections on the Drift Characteristic of a Fiber-Optic Passive Ring-Resonator Gyro." In Optical Fiber Sensors. OSA, 1988. http://dx.doi.org/10.1364/ofs.1988.fbb5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Fiber characteristic"

Balk, Ethan, Elyse Couch, Htun Ja Mai, et al. Fiber Intake and Laxation in People With Normal Bowel Function. AHRQ, 2025. https://doi.org/10.23970/ahrqepcsrlaxation.

Повний текст джерела

Анотація:

Objectives. To support a planned update of the Dietary Recommended Intake of macronutrients, including dietary fiber, we conducted a systematic review of the effect of fiber on laxation outcomes (related to gut motility) in people with normal bowel function. Data sources and review methods. We searched PubMed, Embase, and existing systematic reviews to March 4, 2025 for randomized trials in the general population of people in any life stage (without bowel dysfunction) that compared amounts, types, or forms of fiber. Outcomes of interest were stool consistency, fecal weight, fecal frequency, gu

Стилі APA, Harvard, Vancouver, ISO та ін.

Kaewplung, Pasu. Performance improvement of long-haul ultra-high-speed optical transmission using midwary optical phase conjugation. Chulalongkorn University, 2003. https://doi.org/10.58837/chula.res.2003.58.

Повний текст джерела

Анотація:

In optical phase conjugation (OPC) systems, the third-order dispersion (TOD) of optical fibers and the nonlinear resonance at well-defined signal sideband frequencies called sideband instability (SI) mainly limit the transmission performance. We present for the first time a complete theoretical analysis of sideband instability (SI) that occurs when two kinds of fibers with different characteristics are concatenated to form a dispersion-managed fiber link. We find that the magnitude of the SI gain reduces with the increase in strength of dispersion management. Next, we focus on the fiber link u

Стилі APA, Harvard, Vancouver, ISO та ін.

Masterson, Keith D. Electromagnetic shielding characteristics of optical-fiber connectors. National Bureau of Standards, 1997. http://dx.doi.org/10.6028/nist.tn.1383.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Braginsky, M., and Craig P. Przybyla. Dependence of Crack Propagation/Deflection Mechanism on Characteristics of Fiber Coating or Interphase in Ceramics Matrix Continuous Fiber Reinforced Composites (Postprint). Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada610220.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kaewplung, Pasu. Performance improvement of fiber-optic transmission system by replacing electronic repeaters with optical amplifiers. Chulalongkorn University, 2004. https://doi.org/10.58837/chula.res.2004.70.

Повний текст джерела

Анотація:

We study four methods: the zero-dispersion wavelength (ZDWL) transmission, the dispersion management, the optical soliton transmission, and the midway optical phase conjugation (OPC), for upgrading installed electronic repeater-based optical fiber transmission system to optically amplified system. We derive the optimum design rules for each scheme to achieve the maximum transmission data rate. The 1,318-km-long Thailand-Malaysia (T-M) submarine fiber-optic transmission system is used as the system model. Firstly, we give the basic knowledge about fiber characteristics and their effects to sign

Стилі APA, Harvard, Vancouver, ISO та ін.

López-Soto, Jamie F., and Bryant A. Robbins. Laboratory measurements of the erodibility of gravelly soils. U.S. Army E ngineer Research and Development Center, 2021. http://dx.doi.org/10.21079/11681/42443.

Повний текст джерела

Анотація:

The critical shear stress and erodibility of soil are fundamental parameters for modeling embankment breaching. Unfortunately, very few studies have examined the erosion characteristics of soils consisting predominantly of particles larger than sand. This report presents results of an experimental study in which the erosion characteristics of gravelly soils were measured. A flume apparatus was developed in which 0.45-m-square samples were extruded into confined flow. A mechanical laser system allowed the measurement of scour in real time, resulting in a continuous and automated erosion test. T

Стилі APA, Harvard, Vancouver, ISO та ін.

Bucholtz, Frank, Mark Seaver, and Michael D. Todd. Comparison of the Frequency Response and Voltage Tuning Characteristics of a FFP and a MEMS Fiber Optic Tunable Filter. Defense Technical Information Center, 2004. http://dx.doi.org/10.21236/ada423385.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mahmoud, Hussam, Emad Hassan, and Guillermo Riveros. Experimental evaluation of steel beams with mechanical section reduction retrofitted with fiber polymers. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/49188.

Повний текст джерела

Анотація:

Steel elements working in a harsh environment can be exposed to corrosion that degrades their performance and threatens the integrity of the whole structure. Recent studies propose using carbon (CFRP) and basalt (BFRP) fiber–reinforced polymers to repair corroded steel cross sections; however, most of these studies have not explored many of the structural characteristics, including ductility. In this study, we conduct a series of full-scale experimental tests to investigate the impact of corrosion, represented as mechanical section reduction, on steel beams as well as the impact of repairing t

Стилі APA, Harvard, Vancouver, ISO та ін.

Beckman, Ivan. Development of alternative air filtration materials and methods of analysis. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/47188.

Повний текст джерела

Анотація:

Development of high efficiency particulate air (HEPA) filters demonstrate an effort to mitigate dangerous aerosol hazards at the point of production. The nuclear power industry installs HEPA filters as a final line of containment of hazardous particles. An exploration of analytical, experimental, computational, and machine learning models is presented in this dissertation to advance the science of air filtration technology. This dissertation studies, develops, and analyzes alternative air filtration materials and methods of analysis that optimize filtration efficiency and reduce resistance to

Стилі APA, Harvard, Vancouver, ISO та ін.

Morkun, Vladimir S., Natalia V. Morkun, and Andrey V. Pikilnyak. Augmented reality as a tool for visualization of ultrasound propagation in heterogeneous media based on the k-space method. [б. в.], 2020. http://dx.doi.org/10.31812/123456789/3757.

Повний текст джерела

Анотація:

For programming the AR tools, interactive objects and creating the markers, the method of fiber spaces (k-space) for modeling of ultrasonic wave propagation in an inhomogeneous medium using coarse grids, with maintaining the required accuracy was used. The algorithm and tools of augmented reality were introduced into the adaptive control system of the pulp gas phase in the iron ore flotation process using a control action on the basis of high-energy ultrasound dynamic effects generated by ultrasonic phased arrays. The tools of augmented reality based on k-space methods allow to facilitate wide

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!