Готові списки джерел за темами / Fiber-derived value

Зміст

Статті в журналах
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Fiber-derived value"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fiber-derived value".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Fiber-derived value"

Fatriasari, Widya, Ratih Damayanti, and Anita Sita Heris. "FIBER QUALITIES OF PRETREATED BETUNG BAMBOO (Dendrocalamusasper) BY MIXED CULTURE OF WHITE-ROT FUNGI WITH RESPECT TO ITS USE FOR PULP/PAPER." JOURNAL OF FORESTRY RESEARCH 10, no. 2 (2013): 89–99. https://doi.org/10.20886/ijfr.2013.10.2.89-99.

Повний текст джерела

Анотація:

Previous research on anatomical structures of pretreated large (betung) bamboo (Dendrocalamusasper) using single culture of white-rot fungi has been investigated, which revealed that the pretreatment caused the decrease in the Runkel ratioas well as the coefficient rigidity and the increase in the flexibility ratio of their corresponding bamboo fibers. However, there is no study reported on the anatomical structure changes of them caused by pretreatment using mixed culture of white-rot fungi. This paper reports the results of the research on paper/pulp quality after different

Стилі APA, Harvard, Vancouver, ISO та ін.

Lestari, Dini, Rima Vera Ningsih, and Fauzan Fahrussiam. "Anatomical Properties and Quality of African Wood Fiber as A Raw Material for Pulp and Paper." PERENNIAL 19, no. 2 (2023): 17–22. https://doi.org/10.24259/perennial.v19i2.31192.

Повний текст джерела

Анотація:

Nowdays, there is growing interested in development of afrika wood utilization. Afrika wood is one fast growing species from plantation forest. The objective of this research was to evaluated of characterization of afrika fiber for pulp and paper production. Anatomical properties of afrika wood were also investigated. Determination of characterization of fiber dimension was conducted based on Tappi (1989). The resulted showed that afrika wood have type of porous namely soliter and radial multiple porous. The parenchyma and ray characters were paratracheal parenchyma confluent and multiseriate

Стилі APA, Harvard, Vancouver, ISO та ін.

Buzzanca, Carla, Angela D’Amico, Enrica Pistorio, Vita Di Stefano, and Maria Grazia Melilli. "Carob-Based Functional Beverages: Nutritional Value and Health Properties." Beverages 11, no. 1 (2024): 1. https://doi.org/10.3390/beverages11010001.

Повний текст джерела

Анотація:

Functional carob beverages have recently attracted consumer attention as a natural and sustainable alternative due to their excellent nutritional profile and associated health benefits. Derived from the pods of the carob tree (Ceratonia siliqua L.), which thrives in Mediterranean regions, these beverages are naturally sweet, caffeine-free, and rich in bioactive compounds, including polyphenols, dietary fiber, and essential minerals. This review highlights the nutritional composition of carob beverages, noting their high fiber content, antioxidant capacity, and lack of stimulating alkaloids, ma

Стилі APA, Harvard, Vancouver, ISO та ін.

Iriondo-DeHond, Amaia, Maria Belen Rios, Teresa Herrera, et al. "Coffee Silverskin Extract: Nutritional Value, Safety and Effect on Key Biological Functions." Nutrients 11, no. 11 (2019): 2693. http://dx.doi.org/10.3390/nu11112693.

Повний текст джерела

Анотація:

This study aimed to complete the scientific basis for the validation of a coffee silverskin extract (CSE) as a novel food ingredient according to European legislation. Nutritional value, safety, effects on biochemical biomarkers and excretion of short chain fatty acids (SCFAs) in vivo of CSE were assessed. Proteins, amino acids, fat, fatty acids, fiber, simple sugars and micronutrients were analyzed. For the first time, toxicological and physiological effects were evaluated in vivo by a repeated-dose study in healthy Wistar rats. Hormone secretion, antioxidant (enzymatic and no-enzymatic) and

Стилі APA, Harvard, Vancouver, ISO та ін.

Diva, Diva Akbar. "Effect of Areca Nut Fiber and Pineapple Leaf Fibers and Polyester Composition on Mechanical Properties of Composite." Journal of Renewable Energy and Mechanics 7, no. 02 (2024): 100–107. http://dx.doi.org/10.25299/rem.2024.18455.

Повний текст джерела

Анотація:

The Effect of Areca Nut Fiber and Pineapple Leaf Fibers and Polyester Composition on Mechanical Properties of Composite Diva Akbar*, Dody Yulianto Mechanical Engineering Study Program, Faculty of Engineering, Islamic University of Riau Jl. Kaharuddin Nasution Km 11 No.113 Perhentian Marpoyan, Pekanbaru Telp. 0761 – 674635 Fax. (0761) 674834 Email : divaakbar@student.uir.ac.id ABSTRACT Areca nut fiber and pineapple leaf fiber are types of fiber derived from natural fibers that are interesting to research as composite reinforcing fibers because currently they are very abundantly available. This

Стилі APA, Harvard, Vancouver, ISO та ін.

Boonpitaksakul, Wisanee, Korawit Chitbanyong, Buapan Puangsin, Sawitree Pisutpiched, and Somwang Khantayanuwong. "Natural fibers derived from Coi (Streblus asper Lour.) and their behavior in pulping and as paper." BioResources 14, no. 3 (2019): 6411–20. http://dx.doi.org/10.15376/biores.14.3.6411-6420.

Повний текст джерела

Анотація:

The Siamese people utilized the bark of the Coi tree (Streblus asper Lour.) to manufacture paper approximately 330 years ago. However, there are no studies yet related to the chemical properties of Coi bark as well as the morphological properties of Coi bark fiber and Coi pulp fiber. This research paper discussed such properties of Coi bark. The results indicated that Coi bark possessed a chemical composition that could potentially be used for pulp production, although it contained a high value of ash content, due to many calcium particles in the bark. Even though Coi pulp fibers were very lon

Стилі APA, Harvard, Vancouver, ISO та ін.

Essiambre, R. J., and R. Vallée. "Pulse compression, shaping, and pedestal suppression using a nonlinear twin-core fiber in a loop configuration." Canadian Journal of Physics 71, no. 1-2 (1993): 11–19. http://dx.doi.org/10.1139/p93-003.

Повний текст джерела

Анотація:

We propose a new fiber device, involving a nonlinear twin-core fiber in a fiber-loop reflector configuration, achieving several all-optical operations. By varying the disperson parameter β2, we generate quasi-square pulses in the positive dispersion regime and produce compressed and pedestal-free pulses (in one pass) in the anomalous dispersion regime. The stability of these phenomena under a change of β2 is also studied. A scale invariance is derived that permits operation of the device at any desired value of β2 simply by changing its length.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bastias-Montes, José-Miguel, María-Fernanda Orrego-Aguilera, Francisca-Jesus Ortiz-Espinoza, Jaime-Alejandro Ortiz-Viedma, and Sergio-Miguel Acuña-Nelson. "Cookies Enriched with Maqui (Aristotelia chilensis (Mol.) Stuntz) Flour: Good Source of Dietary Fiber and Antioxidant Capacity." Journal of Food Processing and Preservation 2023 (June 16, 2023): 1–9. http://dx.doi.org/10.1155/2023/2144394.

Повний текст джерела

Анотація:

Byproducts derived from the agricultural industry and food processing, such as seeds and skin or husks, have become important due to environmental sustainability and their value-added potential. Maqui (Aristotelia chilensis (Mol.) Stuntz) is a native Chilean wild tree that has several beneficial properties due to its high content of anthocyanins, anthocyanidins, phenolic acids, tannins, and fiber. The present study involved flour derived from maqui byproducts (seeds and skin) to produce cookies with a higher content of nutrients, dietary fiber, and antioxidants. Maqui bagasse was converted int

Стилі APA, Harvard, Vancouver, ISO та ін.

Supriyati, Wahyu, Herianto, Alpian, Herianto, and Gimson Luhan. "The Effect of NaOH Concentration and Cooking Time on The Fiber Dimensions and Derived Values of Tabulus Wood (Litsea sp.)." IOP Conference Series: Earth and Environmental Science 1421, no. 1 (2024): 012020. https://doi.org/10.1088/1755-1315/1421/1/012020.

Повний текст джерела

Анотація:

Abstract It is necessary to study the dimensions of the fiber in relation to the influence of NaOH concentration and cooking time on fiber dimensions and derived values. This research aims to determine the fiber dimensions and derivative values of Tabulus wood fibers, as well as the effect of NaOH concentration and pulp cooking time in the cold soda pulping process of Tabulus wood pulp fibers. The testing follows IAWA guidelines. A completely randomized design was used to analyze the effect of NaOH concentration and cooking time on fiber dimensions. The results indicate that Tabulus wood fiber

Стилі APA, Harvard, Vancouver, ISO та ін.

Caffaro, M. A. Grado, and M. Grado Caffaro. "New Results on Bandwidth of GaAs PIN Photodiodes." Active and Passive Electronic Components 16, no. 1 (1993): 23–27. http://dx.doi.org/10.1155/1993/31810.

Повний текст джерела

Анотація:

In this paper an equivalent circuit of a GaAs PIN photodiode for the millimeter wave range is proposed. Moreover, an approximate expression for the bandwidth of this circuit is obtained. By using the effective quality factor concept, an equation that includes the value of a hypothetical resistance involved in the circuit mentioned above, is derived. In the context of fiber optic communications, this "resistance" represents the losses due to the fiber-photodiode coupling.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Fiber-derived value"

Diani, Marco, Abdelrahman H. Abdalla, Claudio Luis de Melo Pereira, and Marcello Colledani. "Impact of Policy Actions on the Deployment of the Circular Value-Chain for Composites." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_21.

Повний текст джерела

Анотація:

AbstractThe effect of legislation on composites recycling can be both a driving force, such as in the case of End-of-Life Vehicle legislation, that is making it mandatory to reuse the materials used in vehicle manufacturing, or a boundary, increasing the burden to manufacturers reusing composite materials. As a consequence, a deep study on the impact of policies on the reuse of composites is fundamental to promote those actions boosting the deployment of circular value-chains. In this Chapter, a model based on System Dynamics theory, representing the entire industrial environment of composite

Стилі APA, Harvard, Vancouver, ISO та ін.

Akagić, Asima, and Amila Oras. "Traditional versus Commercial Apple Varieties: Chemical Composition and Implications for Processing." In Malus domestica - New Insights [Working Title]. IntechOpen, 2025. https://doi.org/10.5772/intechopen.1008508.

Повний текст джерела

Анотація:

Apples (Malus domestica Borkh.) are a widely consumed fruit recognized for their rich nutritional profile and health benefits. The chemical composition of apples differs significantly between traditional and commercial varieties, influencing their suitability and application in food processing. Both traditional and commercial apples are rich in vitamins, minerals, and dietary fiber. However, traditional apples often have higher concentrations of certain phytonutrients, such as polyphenols, due to less intensive breeding for esthetic qualities. In contrast, commercial varieties are typically br

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Fiber-derived value"

Jack, David A., and Douglas E. Smith. "A Statistical Method to Obtain Material Properties From the Orientation Distribution Function for Short-Fiber Polymer Composites." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81263.

Повний текст джерела

Анотація:

Material behavior of short-fiber composites can be found from the fiber orientation distribution function, with the only widely accepted procedure derived from the application of orientation/moment tensors. The use of orientation tensors requires a closure, whereby the higher order tensor is approximated as a function of the lower order tensor thereby introducing additional computational errors. We present material property expectation values computed directly from the fiber orientation distribution function, thereby alleviating the closure problem inherent to orientation tensors. Material pro

Стилі APA, Harvard, Vancouver, ISO та ін.

Sridhar, N., Q. D. Yang, and B. N. Cox. "Fiber Pullout Characteristics Under Dynamic Loading Conditions." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/ad-25305.

Повний текст джерела

Анотація:

Abstract Inertial effects in the mechanism of fiber pullout during dynamic propagation of a bridged crack are critically examined. By reposing simple shear lag models of pullout as problems of dynamic wave propagation, the effect of frictional coupling between the fiber and the matrix is accounted for in a fairly straightforward way. The frictional sliding between the fiber and the matrix is described by a constant interfacial friction stress, the sign of which depends on the relative particle velocity of the fiber and the matrix. Analytical solutions are derived when the load or bridging trac

Стилі APA, Harvard, Vancouver, ISO та ін.

Tang, Chengzhi, and Theodore J. Heindel. "Similitude Analysis for Gas-Liquid-Fiber Flows in Cocurrent Bubble Columns." In ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering. ASMEDC, 2006. http://dx.doi.org/10.1115/fedsm2006-98096.

Повний текст джерела

Анотація:

Gas-liquid-fiber systems are different from conventional gas-liquid-solid systems in that the solid material (i.e., fiber) is flexible, has a large aspect ratio, and forms flocs or networks when its mass fraction is above a critical value. With its wide application to the pulp and paper industry, it is important to investigate the hydrodynamics of gas-liquid-fiber systems. In this paper, 19 parameters that influence gas holdup in gas-liquid-fiber bubble columns are critically examined and then a dimensional analysis based on the Buckingham Pi Theorem is used to derive the dimensionless paramet

Стилі APA, Harvard, Vancouver, ISO та ін.

Williams, R. Brett, Daniel J. Inman, and W. Keats Wilkie. "Nonlinear Response of the Macro Fiber Composite Actuator to Monotonically Increasing Excitation Voltages." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60569.

Повний текст джерела

Анотація:

This paper presents a nonlinear model which predicts the response of a piezoelectric continuum to a monotonic increase in electric field from some DC offset value under some constant mechanical load within the linear-elastic region. A general model is derived and then specialized for a piezoceramic-based material with anisotropic actuation and mechanical properties, for example, the Macro Fiber Composite (MFC) actuator. This specialized formulation includes the linear-elastic mechanical response, as well as linear and second-order piezoelectric behavior and a second-order electromechanical cro

Стилі APA, Harvard, Vancouver, ISO та ін.

Shuai, Chang-Geng, Lin He, and Zhi-Qiang Lv. "Analysis for Compression Strength of Elbow Rubber Hose Reinforced by Fibers." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84380.

Повний текст джерела

Анотація:

The stress of curved rubber hose with inner pressure is analyzed. On the base of the spiraled geometrical configuration of fiber around the curved rubber hose, the formulation of its neutral angle and compression strength is derived. The theoretical analysis and experimental results indicate that the axial stress of curved rubber hose with inner pressure is the same as that of straight rubber hose, and the hoop stress of curved rubber hose with inner pressure reaches the maximum value on the inside of its camber line and the minimum value on its outside respectively. The compression strength o

Стилі APA, Harvard, Vancouver, ISO та ін.

Le Calvez, Joel, and Takashi Mizuno. "Joint Velocity Model and Microseismic Event Location Inversion Benefit the Measure, Monitor and Verify Value Chain." In Offshore Technology Conference. OTC, 2023. http://dx.doi.org/10.4043/32425-ms.

Повний текст джерела

Анотація:

Abstract In carbon capture and storage projects, and in unconventional plays, microseismic monitoring and optical fiber are critical components of the measure, monitor, and verify value chain. A velocity model is required to estimate source location (hypocenter), source parameters, and source mechanism of a detected microseismic event. Incorrect event locations are often the result of an inaccurate knowledge of the velocity model. We propose a new method to simultaneously invert for the hypocenter and the velocity model to provide a robust long-term microseismic monitoring workflow. Such probl

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Fan, C. L. Chow, and H. Eliot Fang. "Damage in Unidirectional Graphite/Epoxy Laminates Containing a Circular Hole." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0697.

Повний текст джерела

Анотація:

Abstract In this paper, a damage mechanics model is described for determining progressive damage process of unidirectional graphite/epoxy composite plates containing a central hole subjected to off-axis uniaxial tension. The inelastic behavior of these composite materials is attributed to the irreversible thermodynamics processes involving energy dissipation and stiffness variation caused by damage initiation and accumulation. The mechanical response of the composites is investigated by using a nonlinear finite element procedure formulated with a set of damage coupled constitutive equations. S

Стилі APA, Harvard, Vancouver, ISO та ін.

Yu, Zhiyang, Kristina Shea, and Tino Stanković. "Computational Design of a Personalized Artificial Spinal Disc With a Data-Driven Design Variable Linking Heuristic." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97777.

Повний текст джерела

Анотація:

Abstract A personalized, 3D printed, multi-material artificial spinal disc is expected to not only achieve personalized anatomical fit, but also to restore the natural mechanics of the implanted spinal segment. However, the necessary structure for disc design is not explored and optimizing the design is challenging due to the high-dimensional search space provided by the material distribution precision of multi-material 3D printing as well as necessary nonlinear finite element simulation. Therefore, this study explores the feasibility of two multi-material spinal disc designs and a clustering-

Стилі APA, Harvard, Vancouver, ISO та ін.

Baranauskas, Vince, and Julie Klima. "Multipurpose Spall Protective, Energy Absorbing Hybridsil® Materials for Military Vehicle Interiors." In 2024 NDIA Michigan Chapter Ground Vehicle Systems Engineering and Technology Symposium. National Defense Industrial Association, 2024. http://dx.doi.org/10.4271/2024-01-3810.

Повний текст джерела

Анотація:

<title>ABSTRACT</title> Through Army SBIR funding, NanoSonic has designed a next-generation multipurpose Spall Protective, Energy Absorbing (SPEA™) HybridSil® material that has the potential to provide vehicle occupants with pioneering combinatorial protection from 1) fragmentation behind-armor debris (BAD), 2) high velocity head / neck impact, and 3) fire during underbody blast, crash, and rollover events. This innovative multilayered ensemble consists of highly flame resistant, energy absorbing polyorganosiloxane foams, molded ultrahigh molecular w

Стилі APA, Harvard, Vancouver, ISO та ін.

Cavani, Armando, Leticia Melo, Victor Vivas, and Deylla Gomes. "Comprehensive Review of Real-Time Electric and Hybrid Fiber/Electric Telemetry in CT Interventions." In SPE/ICoTA Well Intervention Conference and Exhibition. SPE, 2025. https://doi.org/10.2118/224027-ms.

Повний текст джерела

Анотація:

Abstract Real-time (RT) telemetry coiled tubing (CT) technology has transformed intervention operations in the oil and gas sector and has moved from conventional practices that rely on surface sensors and simulations to advanced systems that provide precise RT downhole data acquisition. A global review of electric-only and hybrid fiber/electric telemetry CT systems and an examination of their profound impact on operational performance and decision processes are presented. Historical data from CT units used since 2017 in various onshore and offshore scenarios form the basis of this study. Appli

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Fiber-derived value"

Dippold, Marcel, Makrina A. Chairopoulou, Maximilian Drexler,, Michael Scheiber, and Holger Ruckdäschel. From vibrating molecules to a running shoe: connecting dielectric properties with process feedback in radio-frequency welding of TPU bead foams. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.pfm.1.

Повний текст джерела

Анотація:

Besides new material solutions, innovative processing technologies are key for working towards a more sustainable future for bead foam products. Compared to standard steam chest molding, innovative radio frequency (RF) welding shows great potential based on its direct energy input, which results in reduced energy consumption. Thus, the present study provides fundamental insights into the correlation of dielectric properties of expanded thermoplastic polyurethane (ETPU) bead foams with the processing behavior. Impedance spectroscopy is used to analyze the complex relative permittivity 𝜀𝜀!∗ of b

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!