Готові списки джерел за темами / Furnace parts

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Furnace parts"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Furnace parts".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Furnace parts"

Fuchs, Thomas, and Fritz Josef Ebner. "Furnace Technologies in Hot Stamping Concepts and Experience from Production." Advanced Materials Research 1063 (December 2014): 354–57. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.354.

Повний текст джерела

Анотація:

Nowadays, a furnace designer has to meet the demands of the customer precisely to allow economical production at site. Repeatable high quality throughout millions of produced parts combined with high cost efficiency is needed to stay competitive. Thus the facility has to be changed from a black-box to a glassy furnace which records and controls all important process values that define the properties of the produced parts and the consumption of the facility. Current furnace designs offer a wide variety of layouts with unique advantages and disadvantages. Single type furnace designs are well kno

Стилі APA, Harvard, Vancouver, ISO та ін.

Drotlew, A., M. Garbiak, and B. Piekarski. "Cast Steels for Creep-Resistant Parts Used in Heat Treatment Plants." Archives of Foundry Engineering 12, no. 4 (2012): 31–38. http://dx.doi.org/10.2478/v10266-012-0103-0.

Повний текст джерела

Анотація:

Abstract Creep-resistant parts of heat treatment furnaces are in most cases made from high-alloyed chromium-nickel and nickel-chromium iron alloys, both cast and wrought. This paper presents the types of casting alloys used for this particular purpose, since the majority of furnace components are made by the casting process. Standards were cited which give symbols of alloy grades used in technical specifications by the domestic industry. It has been indicated that castings made currently are based on a wider spectrum of the creep-resistant alloy grades than the number of alloys covered by the

Стилі APA, Harvard, Vancouver, ISO та ін.

Hassan, Alaa A., and Mohamed S. Hamed. "Modeling of Heat Treatment of Randomly Distributed Loads in Multi-Zone Continuous Furnaces." Materials Science Forum 706-709 (January 2012): 289–94. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.289.

Повний текст джерела

Анотація:

A model for the heat treatment of randomly distributed metal parts processed in multi-zone continuous mesh-belt furnaces has been developed. The model accounts for the heat transfer by convection and radiation to the load and the belt. The effect of gas radiation due to the presence of CO2 and/or H2O gases in the furnace atmosphere has been accounted for. The effect of conduction, convection, and radiation within the parts has been considered. The effective thermal properties of the load have been calculated using a new model developed for randomly distributed parts. The effective thermal prop

Стилі APA, Harvard, Vancouver, ISO та ін.

Choi, Jongrak, Giyeob Yang, and Nahmkeon Hur. "A numerical simulation of a line-type paint drying furnace." International Journal of Numerical Methods for Heat & Fluid Flow 30, no. 5 (2019): 2639–53. http://dx.doi.org/10.1108/hff-11-2018-0697.

Повний текст джерела

Анотація:

Purpose Paint drying is a very important process in an industry where shorter drying time for productivity and lower energy consumption for production cost are required while maintaining the product’s painting quality. In the present study, a drying process in a line-type paint drying furnace equipped with nozzles for hot air supply and moving conveyer belt to dry painted automotive parts is numerically simulated for the flow and heat transfer inside the furnace to evaluate the quality of the drying or baking at the end of the drying process in a production line. Design/methodology/approach A

Стилі APA, Harvard, Vancouver, ISO та ін.

Young, Tim, and George Anelay. "Iron Age iron smelting, Folly Court, Wokingham and the interpretation of 'dome' furnaces." Historical Metallurgy 55, no. 1 (2025): 30–46. https://doi.org/10.54841/hm.671.

Повний текст джерела

Анотація:

Excavations produced evidence for a Middle Iron Age iron smelting centre, probably of the 2nd century BC, with four iron smelting furnaces, three of a large ‘dome’ morphology and one smaller, more conventional, slagpit-type. A total of over 800 kg of slag was recovered from the site, indicating an operation of some significance. Details of furnace construction and large suites of archaeometallurgical residues were recovered for two successive examples of the ‘dome’ furnaces. ‘Dome’ furnaces are rare and poorly known from the British Iron Age, although common in parts of Europe. New evidence sh

Стилі APA, Harvard, Vancouver, ISO та ін.

Nerubatskyi, Volodymyr Pavlovych, Edwin Spartakovych Gevorkyan, Olena Yevhenivna Zinchenko, Denys Anatoliiovych Hordiienko, and Oksana Mykolaivna Morozova. "FEATURE OF INCREASE IN ENERGY EFFICIENCY OF HIGH-TEMPERATURE INDUSTRIAL FURNACES WITH RESISTIVE HEATING." Collection of Scientific Works of the Ukrainian State University of Railway Transport, no. 203 (March 27, 2023): 6–18. http://dx.doi.org/10.18664/1994-7852.203.2023.277882.

Повний текст джерела

Анотація:

For the sintering of ceramic products, high-temperature electric furnaces are used, which work both in a protective environment and in air. In some technological processes, for example, for the production of ceramic carriers for afterburning car exhaust gases based on SiC and Al2O3, only air furnaces are used. Silicon carbide (SiC – silicate) heaters and molybdenum disilicide (MoSi2) are used as resistive heaters in such furnaces. Due to the relatively small resource of their work, it is energetically beneficial to use the residual heat when cooling the furnace. At the same time, there is a si

Стилі APA, Harvard, Vancouver, ISO та ін.

Yuan, Bing, Yun Xia Liu, and Jun Liang Yang. "Finite Element Analysis of Crystal Furnace Based on ANSYS Workbench." Advanced Materials Research 842 (November 2013): 427–32. http://dx.doi.org/10.4028/www.scientific.net/amr.842.427.

Повний текст джерела

Анотація:

In this paper, the sapphire crystal furnace is taken as the object of research. Based on the finite element analysis software ANSYS Workbench, static and modal analysis of the key parts of the crystal furnace are completed, the static and dynamic characteristics of the parts are studied, and the natural frequencies and the mode shapes of the key parts are obtained. According to the analysis of each mode type of the vibration, the weaknesses of the structure are identified, which provides theory reference for the structure optimization design of crystal furnace.

Стилі APA, Harvard, Vancouver, ISO та ін.

Azad Agayev, Ayyam Abbasov, Azad Agayev, Ayyam Abbasov. "RELIABILITY OF COIL TUBES DURING OPERATION OF PYROLYSIS FURNACES OF PETROCHEMICAL INDUSTRIES." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 147, no. 01 (2024): 45–50. http://dx.doi.org/10.36962/pahtei147012024-45.

Повний текст джерела

Анотація:

Technologies of processing of crude oil, hydrocarbons, are necessary to obtain products used in the national economy and industry. In the article, taking into account this fact, the conditions of operation of pyrolysis furnaces, their general principle of operation are considered. It also describes what parts (compartments) and elements make up the pyrolysis furnace. It is noted that in the radiant section of the pyrolysis furnace are installed tubular pyrolysis reactors or coil tubes. They are the main working element of pyrolysis furnaces, through which hydrocarbon feedstock passes and the p

Стилі APA, Harvard, Vancouver, ISO та ін.

Gerdes, T., Monika Willert-Porada, Ho Seon Park, and A. Schmidt. "Production Scale m³ Batch Furnace for Hybrid-Heating and Microwave Sintering." Advances in Science and Technology 45 (October 2006): 869–74. http://dx.doi.org/10.4028/www.scientific.net/ast.45.869.

Повний текст джерела

Анотація:

Production scale inert atmosphere microwave sintering has not been successful yet, mainly because of lack of suitable equipment. For sintering in air microwave furnaces are available at different industrial scale, e.g., gas-microwave hybrid heated batch kilns or microwave “adiabatic casket” tunnel kiln [1]. Inert atmosphere furnaces require vacuum and gastight coupling of microwave energy. In the State of the Art technology, microwave-coupling windows represent a heat sink inside the sintering furnace. Although, radiation heat loss at temperatures > 1600 °C can be reduced by using a thermal

Стилі APA, Harvard, Vancouver, ISO та ін.

Cucos, Iulian, Corneliu Munteanu, and Petru Avram. "The Advanced System for Conducting the Electric Furnaces for Heat Treatments." Applied Mechanics and Materials 659 (October 2014): 359–64. http://dx.doi.org/10.4028/www.scientific.net/amm.659.359.

Повний текст джерела

Анотація:

The control of furnaces for heat treatment is a result of the permanent efforts to help work by amplifying of this capacity in solving problems of productions. The advanced system for conducting the furnaces of heat treatments has the main importance in different activities developed in hard conditions. The electric furnaces heat treatment is aimed primarily at obtaining specific temperature profile characteristic type of heat treatment imposed by technology, the heat treatments applied to heat-sensitive parts with complex configuration of alloy or operating in demanding work environments or a

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Furnace parts"

Lorenz, Adam Michael 1974. "Economical furnace processing for 3-D printed metal parts." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9782.

Повний текст джерела

Анотація:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1998.<br>Includes bibliographical references (leaves 92-93).<br>Three-Dimensional Printing is a layer based manufacturing process which uses powdered material to build parts with complicated geometries directly from a 3-D computer model. Metal parts fabricated by this method are initially held together with a polymer binder and are somewhat fragile. To achieve full density and desirable mechanical strength, the green part must undergo two furnace operations, sintering and infiltration. During sintering, the

Стилі APA, Harvard, Vancouver, ISO та ін.

Chilukuri, Ram. "Design and fabrication of a post-processing furnace for 3D printed parts." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/88845.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Madonsela, Alex Thulani. "A structured approach for the reduction of mean time to repair of blast furnace D, ArcelorMittal, South Africa, Vanderbijlpark / Madonsela A.T." Thesis, North-West University, 2011. http://hdl.handle.net/10394/7311.

Повний текст джерела

Анотація:

Organizations are expected by their shareholders to continually deliver above industry returns on capital invested and to remain competitive in the industry of choice through productivity, safety and quality. The maintenance function is a key area in which competitiveness through efficiencies and world–class performance can be attained by focusing on the prevention and reduction of long and costly equipment repair times. The question is: how can the mean time to repair of equipment already installed in the plant be reduced? To answer the above question correctly and comprehensively, the resear

Стилі APA, Harvard, Vancouver, ISO та ін.

Зінченко, Р. С. "Удосконалення технологічного процесу виготовлення деталей агрегату пічного шляхом застосування високопродуктивних інструментів та оснастки". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75448.

Повний текст джерела

Анотація:

Робота присвячена питанням проектування технологічного процесу виготовлення деталей агрегату пічного. Проаналізовано технічні вимоги на виготовлення деталі. Визначено тип виробництва, обгрунтований спосіб отримання заготовки. Спроектовано верстатний пристрій.<br>Работа посвящена вопросам проектирования технологического процесса изготовления деталей агрегата печного. Проанализированы технические требования на изготовление детали. Определен тип производства, обоснован способ получения заготовки. Спроектировано станочное приспособление.<br>The work is devoted to the designing of the technological

Стилі APA, Harvard, Vancouver, ISO та ін.

Gustavsson, Joel. "Reactions in the Lower Part of the Blast Furnace with Focus on Silicon." Doctoral thesis, Stockholm, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-59.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tučková, Eva. "Výroba dvoufázových austeniticko-feritických korozivzdorných ocelí s využitím vakuové metalurgie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382125.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Furnace parts"

(Paris), Maison de Balzac. Souscrivez à la Comédie humaine!: Oeuvres complètes de M. de Balzac, édition de luxe et à bon marché [exposition, Paris, Maison de Balzac, 20 sept.-4 nov. 2001]. 2nd ed. Paris Musées, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fisher, Lewis F. No cause of offence: A Virginia family of Union loyalists confronts the Civil War. Maverick Pub. Co., 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: Protecting parks and wilderness from nearby pollution sources : report to the chairman, Environment, Energy and Natural Resources Subcommittee, Committee on Government Operations, House of Representatives. GAO, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: Efforts to control ozone in areas of Illinois, Indiana, and Wisconsin : briefing report to congressional requesters. The Office, 1988.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: Improvements needed in detecting and preventing violations : report to the chairman, Subcommittee on Oversight and Investigations, Committee on Energy and Commerce, House of Representatives. GAO, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: EPA needs more data from FHWA on changes to highway projects : report to the chairman, Subcommittee on Oversight and Investigations, Committee on Energy and Commerce, House of Representatives. GAO, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: Changes needed in EPA's program that assesses radon measurement firms : report to the Chairman, Committee on Science, Space, and Technology, House of Representatives. U.S. General Accounting Office, 1990.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: Emission sources regulated by multiple Clean Air Act provisions : report to the Chairman, Subcommittee on Clean Air, Wetlands, Private Property, and Nuclear Safety, Commmittee on Environment and Public Works, U.S. Senate. U.S. General Accounting Office, 2000.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: EPA's strategy to control emissions of benzene and gasoline vapor : report to the chairman, Subcommittee on Oversight and Investigations, Committee on Energy and Commerce, House of Representatives. GAO, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Office, General Accounting. Air pollution: The Border Smog Reduction Act's impact on ozone levels : report to Congressional committees. The Office, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Furnace parts"

Xiaojun, Hu. "Rediscovering Ancient China’s Sword-Making Techniques: Insights from Reconstructing a Han-Dynasty Ring-Pommel Dao." In Martial Culture and Historical Martial Arts in Europe and Asia. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2037-0_7.

Повний текст джерела

Анотація:

AbstractSunzi said, “Warfare is pivotal to the state. [It is] a milieu where life and death are decided, [it holds] the path to survival or extermination and cannot be neglected.” In like manner, the Commentary of Zuo (Zuozhuan) states, “Rituals and warfare are of vital importance to the state.” From this we see that besides ritual matters, such as ancestor worship and maintaining the temples, rulers in ancient China considered warfare and military training to be of utmost importance. Consequently, much attention was paid to sacrificial implements and weapons of war. The production and mainten

Стилі APA, Harvard, Vancouver, ISO та ін.

Rossi, Jessica, and Augusto Bianchini. "Optimisation of the Melting Furnace Unit in an Italian Aluminium Foundry to Reduce Gas Methane Consumption." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_87.

Повний текст джерела

Анотація:

AbstractThe foundry industry is one of the most energy-intensive industrial sectors. Consequently, the energy cost can reach 7–15% of the cost of the operations. Among all the types of energy used, the most significant part of energy consumption is associated in Italy with gas methane in different typologies of melting furnaces. According to the treated material (e.g., aluminium, steel, cast iron), the foundry process can vary; however, some operations characterize the entire sector, such as the metal melting phase, which is the most energy-intensive stage of the process (it can account up to

Стилі APA, Harvard, Vancouver, ISO та ін.

Terpstra, Marten. "Gas turbine parts, engine parts, machine tools, parts of blast furnaces and various steel foundry equipment and other applications." In Materials for Refractories and Ceramics. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4325-4_21.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Grellier, Adèle, David Bulteel, and Luc Courard. "Recycled Brick Fines for New Alkali Activated Binder." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_19.

Повний текст джерела

Анотація:

AbstractThe construction industry today produces huge quantities of wastes, especially during the deconstruction and demolition of buildings. Ceramics and bricks represent a significant part of this inert waste in Belgium and Northern France. The recycling of bricks is already carried out in the form of aggregates used in road embankments. But this constitutes what is called a “downcycling” operation. The investigated way is here a valorization with higher added value in alkali-activated materials through substitution of blast furnace slag (GGBFS) by brick fines with a grain size D50 = 20 µm.

Стилі APA, Harvard, Vancouver, ISO та ін.

Davoodabadi, Maliheh, Marco Liebscher, Massimo Sgarzi, et al. "Electrical and Sulfate-Sensing Properties of Alkali-Activated Nanocomposites." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_29.

Повний текст джерела

Анотація:

AbstractWe investigated the formation of the conductive network of carbon nanotubes (CNTs) in alkali-activated nanocomposites for sulfate-sensing applications. The matrix was a one-part blend of fly ash and ground granulated blast-furnace slag, activated by sodium silicate and water. Sodium dodecylbenzenesulfonate was used as the surfactant for dispersion of the CNTs in the aqueous media. The nanocomposites were investigated by a laboratory-developed setup to study the electrical and sensing properties of the alkali-activated material. The electrical properties (i.e., conductivity) were calcul

Стилі APA, Harvard, Vancouver, ISO та ін.

Mehdizadeh, Hamideh, Mohammad Hajmohammadian Baghban, and Tung-Chai Ling. "Carbonation of Hydrated Blast Furnace Slag Cement Powder: Characterization and Application as a Cement Substitute." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_8.

Повний текст джерела

Анотація:

AbstractOver the past decades, ground granulated blast furnace slag (GGBS) has been extensively used as a replacement for cement in concrete production to mitigate cement carbon emissions. Hence, a substantial portion of the hydrated cement paste discarded at the end of a concrete’s lifespan could contain a certain quantity of GGBS. This study aims to investigate the feasibility of using hydrated cement paste containing 30% GGBS (BSCP) in cementitious binders via moisture carbonation treatment. The changes in the microstructure of BSCP before and after carbonation are analyzed using thermograv

Стилі APA, Harvard, Vancouver, ISO та ін.

"Melting Furnace Parts and Accessories." In Aluminum Recycling. CRC Press, 2006. http://dx.doi.org/10.1201/9781420006247.ch8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"Melting Furnace Parts and Accessories." In Aluminum Recycling. CRC Press, 2013. http://dx.doi.org/10.1201/b16192-11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"Materials for Heat-Treating Furnace Parts, Trays, and Fixtures[1]." In Steel Heat Treating Technologies. ASM International, 2014. http://dx.doi.org/10.31399/asm.hb.v04b.a0005930.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

"Ion Nitriding Equipment." In Practical Nitriding and Ferritic Nitrocarburizing. ASM International, 2003. http://dx.doi.org/10.31399/asm.tb.pnfn.t65900089.

Повний текст джерела

Анотація:

Abstract Ion nitriding equipment can be categorized into two groups: cold-wall continuous direct current (dc) equipment and hot-wall pulsed dc equipment. This chapter focuses on these two categories along with other important considerations for ion (plasma) nitriding equipment and processing. Other important considerations discussed include the hollow cathode effect, sputter cleaning, furnace loading, pressure/voltage relationships, workpiece masking, and furnace configuration options. The chapter describes five methods of cooling parts from the process temperature to an acceptable exposure te

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Furnace parts"

Jones, Trevor M. "In Situ Oxidation of Steels as an Effective and Economical Pretreatment for Uniform and Consistent Vacuum Gas Nitriding Results." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0304.

Повний текст джерела

Анотація:

Abstract A vacuum-purge gas nitriding furnace was modified to develop a process and a furnace enhancement to produce a controlled in situ oxide layer on the surfaces of steel parts using various oxidation techniques. The process is an effective alternative to conventional grit blasting of materials as a means of surface preparation for uniform and consistent nitriding results. Pre-oxidation is known to enhance receptivity of steel part surfaces to the effects of nitriding, and in situ oxidation is inherently efficient and economical. Topics discussed include the type of oxidizing carrier used

Стилі APA, Harvard, Vancouver, ISO та ін.

Lin, J. Y., C. Y. Chu, C. L. Ho, and H. Chang. "The Effects of Microstructure on the Mechanical Properties and Corrosion Behaviour of Hp Refining Tube at Elevated Temperatures." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93259.

Повний текст джерела

Анотація:

Abstract Furnace tubes are essential parts in the petroleum refining processes, and it is important to know how to use them safely. This study investigates the microstructures and properties of HP furnace tubes at elevated temperature. As the treating temperature increases, the secondary carbides precipitate around the eutectic carbides initially and in austenitic matrix progressively. Above 900 °C, the secondary carbides redissolve in the matrix, and needle pattern carbides renucleate and grow. The hardness and polarization curve of different heat treated HP tubes are also measured to reveal

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Zhichao (Charlie), and B. Lynn Ferguson. "Process Innovation to Eliminate Cracking Problems in Large Diameter Parts with Nonuniform Wall Thickness." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0125.

Повний текст джерела

Анотація:

Abstract The induction hardening process has been widely adopted in the heat treatment industry due to its energy efficiency, process consistency, and clean environment. Compared to traditional furnace heating and liquid quenching processes, induction hardening is more flexible in terms of process adjustment for improved results. The commonly modified process parameters are frequency and power of the inductor, method and timing of power application, and spray quench rate. In this study, a scanning induction hardening process of a generic coupler made of AISI 4150 is investigated by heat treatm

Стилі APA, Harvard, Vancouver, ISO та ін.

Fradette, Real, and Trevor Jones. "Considering Emissivity Factors of a Workload When Projecting Heating Rates in a Vacuum Furnace Emissivity." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0285.

Повний текст джерела

Анотація:

Abstract Radiation heating of materials in vacuum furnaces is critically dependent on surface characteristics, with material emissivity and absorptivity playing pivotal roles in heating dynamics. Surface properties such as color, polish, and roughness significantly influence heating rates, with bright and polished surfaces heating more slowly than dull and dark surfaces, while rough surfaces heat faster than smooth ones. When using thermocouple blocks to simulate actual load parts, precise replication of surface conditions is essential, as surface variations can cause substantial temperature d

Стилі APA, Harvard, Vancouver, ISO та ін.

Kumar, Ashok, John F. Bonini, and John Bukowski. "Ceramic Fiber Reinforced Glasses for Corrosion Damage Repair." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89084.

Повний текст джерела

Анотація:

Abstract The general purpose of this composite material is to repair damage to metallic components caused by pitting, erosion or cavitation corrosion. Typically parts include turbine/pump impellers, dam gates, miter gates, heat exchanger, boiler condensate pipes, etc. The repair material is comprised of a glassy matrix formulated to bond chemically to the corroded metallic substrate. The tightly adhering corrosion products are dissolved by this glassy matrix and become part of the composite. The fracture toughness of the matrix is increased by reinforcing with high strength ceramic fibers, or

Стилі APA, Harvard, Vancouver, ISO та ін.

Strach, Larry. "Operating Experience of Refractory Linings in Mass-Burn Fired Water Wall Boilers." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89203.

Повний текст джерела

Анотація:

Abstract The corrosive environment in the combustion zone of mass-burn refuse-fired boilers necessitates protecting the furnace pressure parts with refractory. Descriptions of lining systems are given for seven plants designed by Wheelabrator Environmental Systems (WES). The paper examines the design and materials considerations for refractory lining systems, based on 13 years of operating experience in WES installations. Important aspects of refractory linings reviewed are the refractory bonding and anchoring systems. Guidelines are presented on specifying optimum lining systems for refuse-fi

Стилі APA, Harvard, Vancouver, ISO та ін.

Freborg, Andrew M., and B. Lynn Ferguson. "Analysis and Experience using Process Modeling for Developing New and Corrective Heat Treat Schedules for Deep Case Carburizing." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0154.

Повний текст джерела

Анотація:

Abstract Achieving deep carburized cases in large parts, i.e. depths of 2mm or more, can often be problematic. Requiring long diffusion times at temperature, unanticipated furnace power fluctuations, changes in gas supply, inaccurate probe function, and/or atmosphere changes may result in insufficient case depth. Rising energy costs make methods for calculating efficient carburization schedules more critical. Methods used for shallow case applications may not be suitable for determining deep case schedules. The same holds for changes in alloy content, where shallow case prediction errors may b

Стилі APA, Harvard, Vancouver, ISO та ін.

Al-Amoudi, Omar Saeed Baghabra. "Protection of Reinforced Concrete Structures in Chloride-Sulfate Exposures." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07279.

Повний текст джерела

Анотація:

Abstract Marine, coastal and offshore environments or soils charged with concentrated brines are characterized by high concentrations of chlorides and sulfates. The influence of sulfate ions on chloride-induced corrosion of reinforcing steel in concrete has not been well documented in the literature. An exemplary situation, where these salts exist concomitantly, is the sabkha soil which prevails in many parts of the world. The severity of sabkha environment has resulted in a lot of resources being spent on repair and rehabilitation of the deteriorated concrete infrastructures. This paper summa

Стилі APA, Harvard, Vancouver, ISO та ін.

Copeland, Thomas S., Jesus R. Acosta, and Tom Bruno. "Plastic Deformation and Failure of a High Alumina Thermowell in a High Temperature Oxygen Enriched Sulfur Reaction Furnace." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05565.

Повний текст джерела

Анотація:

Abstract Due to government regulation, sulfur-treating units are a necessary part of today's refining businesses. Sulfur reaction furnaces are high temperature aggressive environments requiring the use of specialty materials. Due to their high melting temperatures and low reactivity, high alumina ceramic materials are ideally suited to this service. However, process upsets including contamination and uncontrolled shutdowns from these elevated temperatures can still cause failure of these materials. This paper discusses the recent failure of a high alumina ceramic thermowell in an oxygen enrich

Стилі APA, Harvard, Vancouver, ISO та ін.

Schmid, Alexander, and Gregor Mori. "UNS S31400 Stainless Steel as Reactor Material in a Thermal Cracking Process." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09320.

Повний текст джерела

Анотація:

Abstract UNS S31400 stainless steel was tested as a reactor material for a thermal cracking process of agricultural, silvicultural, industrial and anthropogenic resources containing HCl. This material was chosen as it offers proper corrosion resistance in hot gases besides a good price and a high availability. In a first step, a bench scale pilot plant has been established and subsequently test runs have been performed. Cross sections of reactor pipes of the bench scale pilot plant were investigated after 30 h test runs by metallography, SEM / EDX and STEM / EDX. In addition, an independent ex

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Furnace parts"

Mehdizadeh Momen, Ayyoub, Jeffrey D. Munk, and Patrick Hughes. Condensing Furnace Venting Part 2: Evaluation of Same-Chimney Vent Systems for Condensing Furnaces and Natural Draft Water Heaters. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1187915.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Kwan-ho, C. Lovell, and Rodrigo Salgado. The Use of Pyrolized Carbon Black as an Additive (Part 3: Air Cooled Furnace Slag). Purdue University, 1996. http://dx.doi.org/10.5703/1288284313333.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Stanley T. Proposed revisions of part of the test procedures for furnace and boilers in ASHRAE standard 103-1993. National Institute of Standards and Technology, 2002. http://dx.doi.org/10.6028/nist.ir.6913.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Davis, R. Savings from new oil furnaces: A study conducted as part of Washington State's Oil Help Program. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5363092.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Smith, M. C. The furnace in the basement: Part 1, The early days of the Hot Dry Rock Geothermal Energy Program, 1970--1973. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/106724.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Davis, R. Savings from new oil furnaces: A study conducted as part of Washington State`s Oil Help Program. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/10137083.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Feldman, M. R. Characterization of the B-1023 furnace for use in hypothetical thermal accident testing of shipping containers in accordance with 10 CFR, Part 71. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5909709.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Feldman, M. R. Further characterization of the B-1023 furnace for use in hypothetical thermal accident testing of shipping containers in accordance with 10 CFR Part 71. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5871835.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!