Увійти

Готові списки джерел за темами / Grain size and Economical sand

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Grain size and Economical sand"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Grain size and Economical sand".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Grain size and Economical sand"

1

Md., Ramjan Ali, Ikramul Hoque Md., Akter Jhumana, and Kawsarul Islam Kabbo Md. "The Use of Various Sand in Foundation Engineering: Performance and Cost Comparison in Context of Bangladesh." Research and Review: Journal of Structural and Building Construction 1, no. 2 (2025): 1–13. https://doi.org/10.5281/zenodo.15385869.

Повний текст джерела

Анотація:

<em>Sand pile technology is a method of ground improvement extensively used throughout Bangladesh to strengthen poor ground to achieve sufficient bearing capacity and minimize the settlement of foundations. One of the key advantages of the sand pile system is that it can be implemented to all forms of soil observed in Bangladesh, from sandy to clayey soils, and it has consequently been utilized as a liquefaction preventive measure. But the performance of the sandpile relies not only on the density of the soil, the space between piles but also on the size of the grain of the sand employed. This

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Kim, Hyun Dong, Shin-ichi Aoki, Nobuhisa Kobayashi, and Susumu Onaka. "THE EFFECTIVE METHOD OF BEACH NOURISHMENT PLACEMENT." Coastal Engineering Proceedings, no. 36 (December 30, 2018): 66. http://dx.doi.org/10.9753/icce.v36.sediment.66.

Повний текст джерела

Анотація:

When erosion occurs, sandy beach cannot maintain the sufficient sand width and the foreshore slope becomes steeper by the frequent erosion effect. As a result, the beach is trapped in a vicious circle of becoming vulnerable by the incident waves. In order to repair or protect the erosive beach, beach nourishment can be used as a countermeasure while minimizing the environmental impacts. However, beach nourishment is not a permanent solution and requires periodic renourishment after several years. To alleviate such problem, minimizing the period of renourishment must be an economical alternativ

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Duszyński, Remigiusz, Angelika Duszyńska, and Stefan Cantré. "New Experiences in Dike Construction with Soil-Ash Composites and Fine-Grained Dredged Materials." Studia Geotechnica et Mechanica 39, no. 4 (2017): 17–24. http://dx.doi.org/10.1515/sgem-2017-0033.

Повний текст джерела

Анотація:

Abstract The supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction properties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed materials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dike cover materials resulting in economical, environmentally friendly and sustainable dikes. Ash from EC Gdańsk and dredged sand from the Vistula river were mixed to form an engineering material used for dike construct

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Oliveira, Igor Rafael Buttignol de, Alan Rodrigo Sorce, Marcos Vinicius Vieira Gaglieri, Fabia Castro Cassanjes, and Sylma Carvalho Maestrelli. "Influence of the addition of glass from long neck bottles in the properties of the reactive powder concrete." Research, Society and Development 11, no. 13 (2022): e519111335853. http://dx.doi.org/10.33448/rsd-v11i13.35853.

Повний текст джерела

Анотація:

This work presents an economical, technical, and environmentally correct solution for the disposal of long neck bottles (which cannot be bottled more than once), by replacing fine aggregates (sand) with residue of ground glass from long neck bottles in the production of reactive powder concrete (RCP). Using a reference formulation for RCP containing natural sand, this raw material was replaced in 12.5, 25, 50, 75 and 100 wt.% by glass residues, evaluating the physical and mechanical properties in the specimens at the ages of 7, 14, and 28 days. The ground glass was characterized by X-ray Fluor

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Hussain, Mazhar, Hafida Zmamou, Antony Provost, et al. "Stabilization and Recycling of Sand in Pedestrian Walkways." Buildings 14, no. 1 (2024): 205. http://dx.doi.org/10.3390/buildings14010205.

Повний текст джерела

Анотація:

The production of construction and demolition waste (CDW) in urban areas is growing rapidly. While the storage and disposal of CDW waste is costly, its recovery can help to conserve natural resources. This study investigates the characteristics of recycled sand obtained from the processing of CDW waste and the possibility of its reuse for pedestrian pathways. Physico-chemical and mineralogical characteristics of the recycled sand were investigated for its reuse. The percentage of fine particles in sand (below 0.63 μm) is 2.8%. The grain size of sand fulfills the particle size requirement of Fr

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Irvani, Irvani, and Elsha Delvi Artasari. "Studi Karakteristik Tailing Pada Lokasi Eks Penambangan Timah di Bukit Sambung Giri Kecamatan Merawang Kabupaten Bangka." PROMINE 6, no. 2 (2018): 31–36. http://dx.doi.org/10.33019/promine.v6i2.1086.

Повний текст джерела

Анотація:

Tailing deposits at ex-tin mining area in Bangka and Belitung Island has a large number of economical residual minerals. This study is to identify tailing characteristic and its potential mineralogy and elements based on shallow hand boring (Auger) samples, along stream line in west part of Sambung Giri Hill. Every coordinate sample plotted on base map. Loboratory analisys using Strereo Mikroscope for identify minerals characteristics, and geochemical analysis using XRF for identification the presence of elements. The tailing deposits has laterally grain size grad

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Norsham, Nur Fatinhanani Fatimah, and Istikamah Subuki. "Synthetization and Characterization of Yttria Stabilized Zirconia Powder from Amang Zircon Sand." Journal of Advanced Research in Micro and Nano Engineering 28, no. 1 (2024): 105–17. https://doi.org/10.37934/armne.28.1.105117.

Повний текст джерела

Анотація:

Zirconia is widely used in industry as it exhibits high strength and amazing properties. However, pure zirconia powder is often unstable to be used in high temperature applications due to phase transformation that will lead to fracture and crack. Hence, zirconia is doped with yttrium oxide in order to enhance zirconium content and stability as it helps to hinder the phase transformation of zirconia. Locally available Amang zircon sand from tin tailing industry in Malaysia can be an economical alternative to synthesize zirconia due to the high zirconium content. Sadly, the study on utilizing Am

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Polivanov, Helena, Antonio Carlos Jacome de Castro, Franklin Dos Santos Antunes, and Luiz Cláudio de Araújo Camara. "Estudo de um perfil podzólico e de brunizem da zona oeste do estado do Rio de Janeiro." Anuário do Instituto de Geociências 13 (December 1, 1990): 17–29. http://dx.doi.org/10.11137/1990_0_17-29.

Повний текст джерела

Анотація:

This work describes the study of two types of soil profiles , podzolic and brunizem . The profiles are localized at Avenida Brasil near the Cabritos viaduct in the city of Rio de Janeiro . Chemical analyses, pH values, sulfuric digestion (SiO2, Al2O3,Fe2O3, TiO2, K2O, Na2O), X-ray diffraction of the clay and silt fractions, mineralogical analyses of sand under the microscope , physical measurements of the Atterberg limits, grain size analyses and specific gravity of solids, were undertaken. The analysed soils have values of the Atterberg limits coherent with the grain size and mineralogy, and

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Fattahpour, Vahidoddin, Mahdi Moosavi, and Mahdi Mehranpour. "An experimental investigation on the effect of grain size on oil-well sand production." Petroleum Science 9, no. 3 (2012): 343–53. http://dx.doi.org/10.1007/s12182-012-0218-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Kastornykh, L. I., A. V. Kaklyugin, M. G. Kholodnyak, and D. V. Kuzmenko. "Investigation of the Factors Influencing the Effectiveness of Fine-Grained Self-Compacting Concrete with Crushed Concrete Sand." Modern Trends in Construction, Urban and Territorial Planning 4, no. 2 (2025): 57–66. https://doi.org/10.23947/2949-1835-2025-4-2-57-66.

Повний текст джерела

Анотація:

Introduction. The justified use of mineral raw materials from construction waste for the preparation of vibro-compacted concrete mixtures is economically beneficial and environmentally efficient, however, the effect of aggregates from scrap concrete on the rheological characteristics of fine-grained self-compacting mixtures and the structure of hardened concrete has not been sufficiently studied. The aim of this work is to study the factors influencing the effectiveness of fine–grained self-compacting concrete with crushed concrete sand.Materials and Methods. To determine the effectiveness of

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Grain size and Economical sand"

1

Bloomer, Daniel John. "Sediment sorting in the gravel-sand transition along rivers : a field and modelling investigation." Thesis, University of Sheffield, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341852.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Smith, David A. "Effect of particle shape on grain size, hydraulic, and transport characteristics of calcareous sand." Thesis, University of Hawaii at Manoa, 2003. http://proquest.umi.com/pqdweb?index=0&did=764803691&SrchMode=1&sid=2&Fmt=2&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1233275673&clientId=23440.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kalumba, Denis. "Effect of grading and grain size on the friction characteristics of a sand/geotextile inteface." Master's thesis, Faculty of Engineering and the Built Environment, 2020. http://hdl.handle.net/11427/32297.

Повний текст джерела

Анотація:

Geofabrics are incorporated in geotechnical engineering structures for various reasons and functions. This study addresses the reinforcement function whereby geotextiles are utilised as reinforcing elements in reinforced slopes and fills. It particularly focuses on the soil/geotextile interface behaviour. Geotextile reinforcements transfer a majority of the shear stress from the soil to the reinforcement and vice versa by friction. This interfacing ability manifested by the soil/geotextile frictional contact is very important in the performance of reinforced soil structures, and depends on the

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Sagga, Abdulhafiez Mohamed. "Variations in sand grain size and shape over barchan dunes in the Jafurah Desert, Saudi Arabia." Thesis, Lancaster University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278433.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ehlmann, B. L., K. S. Edgett, B. Sutter, et al. "Chemistry, mineralogy, and grain properties at Namib and High dunes, Bagnold dune field, Gale crater, Mars: A synthesis of Curiosity rover observations." AMER GEOPHYSICAL UNION, 2017. http://hdl.handle.net/10150/626565.

Повний текст джерела

Анотація:

The Mars Science Laboratory Curiosity rover performed coordinated measurements to examine the textures and compositions of aeolian sands in the active Bagnold dune field. The Bagnold sands are rounded to subrounded, very fine to medium sized (similar to 45-500m) with 6 distinct grain colors. In contrast to sands examined by Curiosity in a dust-covered, inactive bedform called Rocknest and soils at other landing sites, Bagnold sands are darker, less red, better sorted, have fewer silt-sized or smaller grains, and show no evidence for cohesion. Nevertheless, Bagnold mineralogy and Rocknest miner

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Knappett, Peter. "Evaluating the Effects of Grain Size and Divalent Cation Concentration on the Attenuation of Viruses and Microspheres through Crushed Silica Sand." Thesis, University of Waterloo, 2006. http://hdl.handle.net/10012/906.

Повний текст джерела

Анотація:

Over the last decade in North America, an increasing number of microbiological drinking water regulations have been used to manage groundwater resources that are potentially influenced by surface water. Regulations such as the Ontario Ministry of Environment Regulation 505, which requires at least a 60 day groundwater travel time between surface waters and drinking water wells, have been created with limited understanding of subsurface pathogen transport processes. Groundwater Under Direct Influence studies (GUDI or GWUDI in USA) are conducted to assess the need to treat well water at an

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Meskar, Mahmoud. "Treatment of Petroleum Contaminated Soil using Supercritical Fluid Extraction (SFE) Technology." Thesis, Université d'Ottawa / University of Ottawa, 2018. http://hdl.handle.net/10393/37393.

Повний текст джерела

Анотація:

In Canada, about 60% of contaminated sites involve petroleum hydrocarbon (PHC) contamination and most of these sites have been abandoned due to contamination. Among current technologies used for soil remediation, supercritical fluid extraction (SFE) is a relatively recent and potentially viable method. The main aim of this research was to investigate the application of SFE for removal of PHCs from contaminated soils. In the first phase, the effects of SFE operational parameters including fluid pressure, fluid temperature, time duration and mode of extraction on the removal efficiency of PHCs

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Marggraf, Jessica. "Amélioration des méthodes pour le suivi hydroacoustique en continu de la concentration et granulométrie du sable en suspension : application à l'Isère à Grenoble Campus." Electronic Thesis or Diss., Lyon 1, 2024. http://www.theses.fr/2024LYO10051.

Повний текст джерела

Анотація:

Connaître les concentrations et la granulométrie du sable en suspension dans les cours d'eau reste des forts enjeux de gestion, car ces grandeurs sont difficiles à mesurer en raison de leur variabilité spatio-temporelle importante. Un exemple particulier en est l'Isère, une rivière aménagée avec de fortes concentrations en sables se propageant sur un lit de graviers. L'objectif de ces travaux de thèse est d'améliorer et d'évaluer des méthodes pour le suivi hydro-acoustique de la concentration et la granulométrie des sables en suspension applicables à des rivières comme l'Isère. Pour cela, des

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Roháčová, Denisa. "Vliv zrnitosti krycí vrstvy na hydraulickou drsnost dna." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226139.

Повний текст джерела

Анотація:

This master thesis is divided into two parts: theoretical and practical one. In the theoretical part there is described hydraulic roughness, velocity distribution in the case of hydraulically rough surface and the process of grain sorting in surface layer. The practical part of the thesis resolves the influence of surface layer on hydraulic roughness of bed, expressed by Nikuradse sand grain size ks. The results are formulas explaining dependence of ks on characteristic grain size dx from grain-size distribution curve and comparison with coefficient ks according to different authors.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Lin, Ting-An, and 林庭鞍. "Evolution of Sand Grain Size Distribution during Bedding Shear." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/43560749836183039979.

Повний текст джерела

Анотація:

碩士<br>淡江大學<br>土木工程學系碩士班<br>104<br>Consequent slope is a smooth layer structure and because by the bedding shear between the layers, there is often present interlayer friction shear move called "seam", which the particle broken after often than upper and lower rock more or a level of fine clay, so often surpasses the original rock friction angle lower and more absorbent.Therefore, this paper mainly two rough granite face sandwich sand particulate material grinding test, the purpose is to explore the distribution characteristics of sand particulate material change of distance between the after s

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Grain size and Economical sand"

1

N, Haggar Thomas, and University of South Dakota. Science Center., eds. Grain-size analysis of post-cretaceous sand and gravel units in southeastern South Dakota. Science Center, University of South Dakota, 2002.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Grain size and Economical sand"

1

Al-Dousari, Noor, Modi Ahmed, Ali Al-Dousari, Musaad Al-Daihani, and Murahib Al-Elaj. "Dust Particle Size and Statistical Parameters." In Atlas of Fallen Dust in Kuwait. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-66977-5_3.

Повний текст джерела

Анотація:

AbstractGrain ‘size’ can be specified and measured in several different ways. All methods of grain size determination have blemishes, and the choice of the most appropriate method is governed by the nature of the sample and the use to which the data are placed. Four main methods are currently used for size analysis of sands: (a) sieving; (b) settling tube analysis; (c) electro-optical methods, including Coulter Counter analysis and laser granulometry; and (d) computerized image analysis. The classification of the particle size distribution of Kuwait dust was mapped according to the parameters

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Van Hoa, Cao, Vu Anh Tuan, Nguyen Thanh Sang, Nguyen Tuong Lai, and Pham Duc Tiep. "Effect of Grain Size on Shear Strength of Coral Gravel Sand." In Lecture Notes in Civil Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0053-1_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Bhattacharya, Raj Kumar, and Nilanjana Das Chatterjee. "Sediment Grain Size Analysis and Mining Intensity: Estimation by GRADISTAT, G-STAT and LDF Techniques." In River Sand Mining Modelling and Sustainable Practice. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72296-8_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Wright, Scott, and Gary Parker. "Grain-Size Specific Suspended Sediment Transport and Flow Resistance in Large Sand-Bed Rivers." In Sedimentation and Sediment Transport. Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0347-5_35.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Viggiani, G., M. Küntz, and J. Desrues. "An experimental investigation of the relationships between grain size distribution and shear banding in sand." In Continuous and Discontinuous Modelling of Cohesive-Frictional Materials. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/3-540-44424-6_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Luu, Xuan Loc, Tuan Duc Ho, Quang Hung Phan, Thong Nguyen, and Thanh Thao Tran. "Influence of Grain Size on the Sediment Budget for Nourished Sand Bars in Hoi-An Area." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-7434-4_204.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Tsoar, Haim. "Two-Dimensional Analysis of Dune Profile and the Effect of Grain Size on Sand Dune Morphology." In Physics of desertification. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4388-9_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Carey, Trevor J., Nicholas Stone, and Bruce L. Kutter. "Grain Size Analysis and Maximum and Minimum Dry Density Testing of Ottawa F-65 Sand for LEAP-UCD-2017." In Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22818-7_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Gkiousas-Kapnisis, Marios, Edward Andò, Alessandro Tengattini, Itai Einav, and Gioacchino Viggiani. "Development of Image Analysis Tools to Evaluate In-Situ Evolution of the Grain Size Distribution in Sand Subjected to Breakage." In Springer Series in Geomechanics and Geoengineering. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-13506-9_36.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Ueda, Kyohei, Yoshikazu Tanaka, Anurag Sahare, et al. "LEAP-ASIA-2019 Simulation Exercise: Calibration of Constitutive Models and Simulations of the Element Tests." In Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading II. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-48821-4_2.

Повний текст джерела

Анотація:

AbstractThis chapter presents a summary of the calibration exercises (i.e., element test simulations) submitted by nine numerical simulation teams that participated in the LEAP-ASIA-2019 prediction campaign. The standard sand selected for the campaign is Ottawa F-65, and researchers have developed several efforts to increase the database of laboratory tests to characterize the physical and mechanical properties of this sand (Carey TJ, Stone N, Kutter BL, Grain Size Analysis and Maximum and Minimum Dry Density of Ottawa F-65 Sand for LEAP-UCD-2017. Model tests and numerical simulations of lique

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Grain size and Economical sand"

1

Fedorko, Patrik, Alena Pribulova, Jozef Petrik, Peter Blasko, and Peter Futas. "EXPERIENCES WITH THE USE OF CUPOLA FURNACE SLAG IN CONSTRUCTION INDUSTRY." In 24th SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s18.34.

Повний текст джерела

Анотація:

Gray cast iron is still the most used material for the production of castings. It can be made in several ways, but the most efficient and economical way to make gray cast iron is in a cupola furnace. A by-product in its production is slag, which arises from impurities that may be present in the charge, from coke, which is used as fuel for the cupola furnace and part of it also passes into the slag, from the lining of the cupola furnace as well as from oxides formed during of the smelting process, sulfides and phosphides. The amount of slag from the cupola furnace represents 5-10% of the weight

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Othman, Nabihah, Mohd Idham Mustaffar, Syarifah Aminah Ismail, and Mohd Hakim Ibrahim. "A Study on the Potential of Local Silica Sand for the Production of Coloured Glass." In International Conference on X-Rays and Related Techniques in Research and Industry 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-iv4kzi.

Повний текст джерела

Анотація:

There are abundant silica sand resources in Malaysia, however many have not yet been fully discovered. The primary component used in the production of glass is silica sand. The objective of this research was to determine whether local silica sand might be used to make coloured glass. The chemical composition and mineralogy of silica sand were determined using X-ray fluorescence (XRF) and X-ray diffraction (XRD), respectively. The physical properties such as particle size distribution were determined by using a mechanical shaker whereas grain morphology was identified by using a digital microsc

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Haberl, Joachim, Gregor Mori, Markus Oberndorfer, et al. "Influence of Impact Angles on Penetration Rates of CRAs Exposed to a High Velocity Multiphase Flow." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08096.

Повний текст джерела

Анотація:

Abstract A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in a mixed gas - saltwater - sand multiphase flow at impact velocities up to 70 m/s. Artificial brine with a salt content of 27 g/l was used as liquid phase. Sand content, with grain size below 150 μm, was 2.7 g/l brine. CO2 at a pressure of 15 bar was used as gas phase. The impact angle between jet stream (nozzle) and sample surface was varied between 30 and 90°. Rectangular stainless steel disc samples with a size of 20 x 15 x 5 mm were used. They were mechanically ground and polished prior

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Haberl, Joachim, Gregor Mori, Peter Wagner, Wolfgang Havlik, and Peter Hosemann. "How do Microstructure and PREN Affect the Erosion Corrosion Behaviour of Stainless Steels?" In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09480.

Повний текст джерела

Анотація:

Abstract Critical fluid velocities and erosion corrosion rates are often limiting production rates in oil and gas production. A combined flow loop - jet impingement pilot plant has been used to determine mass loss rates in mixed gas - saltwater - sand multiphase flow conditions at impact velocities up to 60 m/s. Artificial brine with a salt content of 27 g/l was used as liquid phase. The sand content, with grain size below 150 μm, was up to five times higher than field conditions to accelerate testing. CO2 at a pressure of 1,500 kPa was used as the gas phase. Rectangular stainless steel sample

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Sosa, A. D., M. D. Echeverría, O. J. Moncada, and S. N. Simison. "Surface Reactivity of Thin Wall Ductile Iron. The Effect of Nodule Count and Microstructure." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08252.

Повний текст джерела

Анотація:

Abstract Thin Wall Ductile Iron (TWDI) castings are an attractive alternative to light alloys when the strength to weight ratio becomes a key design variable. For conventional sand casting operations, wall thickness reduction implies an increase in the number of graphite nodules (NC) and a decrease in grain size. As TWDI castings have a particularly high surface area to volume ratio, surface properties become relevant. The aim of this paper is to analyze the effect of nodule count and microstructure on surface reactivity on unalloyed ductile iron samples. Ductile Iron (DI) was produced with no

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Setiadi, Rahman, Yulianto Jong, Nur Mahfudhin, Mutawif Ilmi Muwaffaqih, and Albert Richal Dading. "Novel Reservoir Sand Grain Size Map Based on Open Hole Gamma Ray Log as Im-Proved ThruTubing Sand Screen Size Selection Guideline on Tunu Multi-Layer Un-Consolidated Gas Reservoir." In Offshore Technology Conference Asia. OTC, 2022. http://dx.doi.org/10.4043/31573-ms.

Повний текст джерела

Анотація:

Abstract Tunu is one of Mahakam fields with majority gas production. The depositional nature of fluvial with minimum tidal influence results in the signature of delta sedimentation by hundred layers of gas-bearing sand lenses as pay zone. They are constructed of unconsolidated clean and shaly sand reservoirs at the shallower burial and higher consolidation at deeper burial due to compaction and diagenesis. The unconsolidated section requires sand control as mandatory means to unlock it safely. The combined challenge of numerous sand layers and marginal reserves makes it economically impossible

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Dimter, Sanja, Martina Zagvozda, Branimir Milovanović, and Miroslav Šimun. "Usage of wood ash in stabilization of unbound pavement layers." In 6th International Conference on Road and Rail Infrastructure. University of Zagreb Faculty of Civil Engineering, 2021. http://dx.doi.org/10.5592/co/cetra.2020.1016.

Повний текст джерела

Анотація:

Unbound base layers are an important part of the pavement, which consume a considerable amount of granular stone material. Favorable grain size distribution of materials, necessary for the construction of unbound base layers, is achieved by selecting a suitable material from nature or favorable material composition is achieved through mechanical stabilization. The basic principle of mechanical material stabilization is the addition of finer or larger granular material to the material of unfavorable, uniform granulometric composition, which is inherently unstable. In designing economical paveme

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Nadeem, Asad, Ronald E. Vieira, and Siamack A. Shirazi. "Sand Detection Using Acoustic Sand Monitors for Liquid-Dominated Multiphase Flow Production." In SPE Annual Technical Conference and Exhibition. SPE, 2023. http://dx.doi.org/10.2118/215115-ms.

Повний текст джерела

Анотація:

Abstract Solid particle erosion in the oil and natural gas industry can be damaging to pipes fittings and equipment, which can lead to maintenance or in the worst case a production shutdown. In both cases, this represents a huge economic loss for the industry. Acoustic sand monitoring is one of the most widely used practices to estimate the amount of sand in the flow. In addition to being commercially available, they can be easily clamped to the outside of a pipe wall, measuring the acoustic energy generated by sand grain impacts on the inner side of a pipe wall. In this work, a broad range of

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Abdallah, Wael, Ping Zhang, Gong Li Wang, and Shouxiang Mark Ma. "Downhole Characterization of Clays and Formation Water Salinity Using Low Frequency Permittivity Dispersion." In Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213213-ms.

Повний текст джерела

Анотація:

Abstract Clays in reservoir rocks have a significant impact on formation evaluation. An important property of clay minerals is their ability to adsorb ions on their exposed surface, which is measured by its cation exchange capacity (CEC). This property can affect saturation calculation if not properly accounted for. Many techniques have been developed for clay characterization, but it remains a focus of frontline research to find an accurate method for quantifying clays in situ and is the main objective of this study. Extensive numerical studies have been conducted and the results have indicat

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Patil, Ravindra M., P. V. Murthy, Kutbuddin Bhatia, Mayur Deshpande, and Karan Pande. "Implementation of Multistack Sand Exclusion Methodology in Extremely Unconsolidated Wells: Learnings from Marginal Daman Field, Western Offshore India." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21310-ms.

Повний текст джерела

Анотація:

Abstract The Daman marginal field is a prolific gas-producing clastic field with highly unconsolidated Paleo-Miocene sandstone formations and a wide variety of lithologies across multistack sand layers. As such, high-rate water packs (HRWPs) are the ideal completion method in many Mumbai fields. Because multistack reservoirs require good zonal isolation, and to prevent crossflow between reservoirs with different pressure regimes, multistack sand exclusion (MSSE) methodology was selected for primary well completions with minimum rig time and a high degree of treatment placement accuracy. From a

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Grain size and Economical sand"

1

Montalvo-Bartolomei, Axel, Bryant Robbins, Erica Medley, and Benjamin Breland. Backward erosion testing : Magnolia Levee. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42140.

Повний текст джерела

Анотація:

Using a confined flume device, an experimental study investigated the critical horizontal gradient of soils obtained from a site identified as potentially vulnerable to backward erosion piping (BEP). Tests were conducted on glacial outwash material obtained from a sand and gravel quarry in the vicinity of Magnolia Levee in the community of Magnolia, OH. The two bulk samples collected from the quarry had similar grain-size distributions, grain roundness, and depositional environments as the foundation materials beneath the levee. Samples were prepared at various densities and subjected to gradu

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!