Добірка наукової літератури з теми "Height-cost"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Height-cost".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Height-cost"

1

TAN, WILLIE. "Construction cost and building height." Construction Management and Economics 17, no. 2 (1999): 129–32. http://dx.doi.org/10.1080/014461999371628.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Vacca, G. "ESTIMATING TREE HEIGHT USING LOW-COST UAV." International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLVIII-M-1-2023 (April 21, 2023): 381–86. http://dx.doi.org/10.5194/isprs-archives-xlviii-m-1-2023-381-2023.

Повний текст джерела
Анотація:
Abstract. Precision agriculture (PA) is defined as an agricultural management based on the observation, measurement, and response of a set of quantitative and qualitative variables that affects agricultural production. The first step in the approach to precision agriculture is, therefore, the acquisition and collection of data from optical, multispectral, geophysical sensors, etc. aimed at obtaining knowledge and monitoring of the crop. In recent years UAVs are assuming an important role in precision agriculture. The possibility of mounting RGB, multispectral, LiDAR sensors on them make these
Стилі APA, Harvard, Vancouver, ISO та ін.
3

KIRN, TIMOTHY F. "Steroids Cost Children Height, Not Bone Mass." Rheumatology News 5, no. 3 (2006): 32. https://doi.org/10.1016/s1541-9800(06)70985-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tanya, Rani, and Agarwal Shagun. "Factors impacting construction cost of high-rise building in India." Journal of Housing and Advancement in Interior Designing 8, no. 1 (2025): 1–18. https://doi.org/10.5281/zenodo.15369703.

Повний текст джерела
Анотація:
<em>The construction of high-rise buildings in India is a critical aspect of urban development, driven by rapid urbanization, population growth, and the increasing demand for residential and commercial spaces. However, the cost of constructing these towering structures remains a significant challenge, influenced by a multifaceted set of factors. Understanding these determinants is essential for effective project planning, cost control, and sustainable development. High-rise construction is a complex and resource-intensive process influenced by numerous cost-driving factors, particularly in a d
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Hetzler, R. K., R. Seip, E. M. Haskvitz, and A. Weltman. "EFFECT OF HEIGHT ON THE METABOLIC COST OF WALKING." Medicine and Science in Sports and Exercise 21, Supplement (1989): S27. http://dx.doi.org/10.1249/00005768-198904001-00158.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Hull, Maury L., and Hiroko K. Gonzalez. "The Effect of Pedal Platform Height on Cycling Biomechanics." International Journal of Sport Biomechanics 6, no. 1 (1990): 1–17. http://dx.doi.org/10.1123/ijsb.6.1.1.

Повний текст джерела
Анотація:
Using a five-bar linkage model of the leg/bicycle system in conjunction with experimental kinematic and pedal force data, the inverse dynamics problem is solved to yield the intersegmental moments. Among the input data that affect the problem solution is the height of the pedal platform. This variable is isolated and its effects on the total joint moments are studied as it assumes values over a ±4-cm range. Platform height variation affects the total joint moment peak values by up to 13%. Relying on a cost function derived from the hip and knee moments, it is found that the platform height tha
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dean, Thomas J. "The role of height increment and marginal height cost in the production ecology of Eucalyptus plantations." Forest Ecology and Management 532 (March 2023): 120846. http://dx.doi.org/10.1016/j.foreco.2023.120846.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Martikkala, Antti, Joe David, Aapo Ylä-Autio, Olli Wiikinkoski, Essi Linnosmaa, and Iñigo Flores Ituarte. "Cost-effective strategies for multi-layer height detection in LWDED." IET Conference Proceedings 2024, no. 11 (2024): 80–87. https://doi.org/10.1049/icp.2024.3489.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kempa, Meidy, Andi Andi, and Lie Arijanto. "ANALISIS BIAYA ELEMENTAL UNTUK PERENCANAAN BIAYA PROYEK APARTEMEN." Dimensi Utama Teknik Sipil 1, no. 1 (2014): 27–35. http://dx.doi.org/10.9744/duts.1.1.27-35.

Повний текст джерела
Анотація:
Apartment’s project cost planning involves a Quantity Surveyor to determine the target cost (budget) for the owner. Target cost must included all elements of the existing building. This study aims to determine the format and price range of each building element in the elemental cost analysis for apartment’s project cost planning.The data were obtained by looking at historical data of the middle class apartment’s projects Bill of Quantity in area of Surabaya, Solo and Semarang with reference to the format NPWC List of Elements, Australia.The results of the data analysis showed that the format o
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Lee, Kim, Kang, and Kim. "Determining the Optimized Hub Height of Wind Turbine Using the Wind Resource Map of South Korea." Energies 12, no. 15 (2019): 2949. http://dx.doi.org/10.3390/en12152949.

Повний текст джерела
Анотація:
Although the size of the wind turbine has become larger to improve the economic feasibility of wind power generation, whether increases in rotor diameter and hub height always lead to the optimization of energy cost remains to be seen. This paper proposes an algorithm that calculates the optimized hub height to minimize the cost of energy (COE) using the regional wind profile database. The optimized hub height was determined by identifying the minimum COE after calculating the annual energy production (AEP) and cost increase, according to hub height increase, by using the wind profiles of the
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Height-cost"

1

Sun, Chunyi. "Ergonomic and Time Cost of One-Handed Lifting tasks as a Function of Shelf Height, Item Weight and Walking Distance." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1566123193772717.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Alumai, Alfred. "Urban Lawn Management: Addressing the Entomological, Agronomic, Economic, and Social Drivers." Columbus, Ohio : Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1227822313.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Height-cost"

1

1948-, Cohen Susan, ed. Normal at any cost: Tall girls, short boys, and the medical industry's quest to manipulate height. Jeremy P. Tarcher/Penguin, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Thomas, Duncan. "Child survival, height for age and household characteristics in Brazil". University of Warwick, Development Economics Research Centre, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Cosgrove, Christine. Normal at Any Cost. Penguin USA, Inc., 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Voth, Hans-Joachim. Did smallpox reduce height?: Stature and the standard of living in London, 1770-1873. University of Oxford, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Susan, Cosgrove Christine Cohen. Normal at Any Cost: Tall Girls, Short Boys, and the Medical Industry's Quest to Manipulate Height. Tarcher, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ford, George B. Building Height, Bulk, And Form; How Zoning Can Be Used As A Protection Against Uneconomic Types Of Buildings On High-Cost Land. Buck Press, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Khoury, Sylvia, Mandy Greenfield, Anna Ziegler, Martyna Majok, and Bess Wohl. Height of Summer : New Plays from Williamstown Theatre Festival 2015-2021: Cost of Living; Actually; Selling Kabul; Grand Horizons; Paradise Blue; Where Storms Are Born. Bloomsbury Publishing Plc, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Khoury, Sylvia, Mandy Greenfield, Anna Ziegler, Martyna Majok, and Bess Wohl. Height of Summer : New Plays from Williamstown Theatre Festival 2015-2021: Cost of Living; Actually; Selling Kabul; Grand Horizons; Paradise Blue; Where Storms Are Born. Bloomsbury Publishing Plc, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Amending the act entitled "An Act to Regulate the Height of Buildings in the District of Columbia" to clarify the rules of the District of Columbia regarding human occupancy of penthouses above the top story of the building upon which the penthouse is placed: Report (to accompany H.R. 4192) (including cost estimate of the Congressional Budget Office). [U.S. Government Printing Office], 2014.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Living Standards In Latin American History Height Welfare And Development 17502000. David Rockefeller Center for Latin American S, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Height-cost"

1

Bednárová, Zuzana, Viliam Geffert, Carlo Mereghetti, and Beatrice Palano. "The Size-Cost of Boolean Operations on Constant Height Deterministic Pushdown Automata." In Descriptional Complexity of Formal Systems. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22600-7_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Tavasci, Luca, Enrica Vecchi, and Stefano Gandolfi. "Definition of the Local Geoid Undulation Using Non-contemporary GNSS-Levelling Data on Subsidence Area: Application on the Adriatic Coastline." In Communications in Computer and Information Science. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94426-1_19.

Повний текст джерела
Анотація:
AbstractThe knowledge of the so-called geoid undulation, which represents the height of the geoid above a reference ellipsoid, is a fundamental step to link ellipsoidal heights measured using satellite systems and orthometric heights. Several geoid models are available at the time both at the national or global scale, which can be used for the purpose. Another way to define the geoid undulation is to perform joint measures with GNSS and spirit levelling over common benchmarks. This requires onerous measurements that is seldom possible to perform due to their cost. In this work, we evaluated th
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Gitahi, Joseph, and Michael Hahn. "Evaluation of Crowd-Sourced PM2.5 Measurements from Low-Cost Sensors for Air Quality Mapping in Stuttgart City." In iCity. Transformative Research for the Livable, Intelligent, and Sustainable City. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92096-8_14.

Повний текст джерела
Анотація:
AbstractExposure to particulate matter (PM) pollution poses a major risk to the environment and human health. Monitoring PM pollution is thus crucial to understand particle distribution and mitigation. There has been rapid development of low-cost PM sensors and advancement in the field of Internet of Things (IoT) that has led to the deployment of the sensors by technology-aware people in cities. In this study, we evaluate the stability and accuracy of PM measurements from low-cost sensors crowd-sourced from a citizen science project in Stuttgart. Long-term measurements from the sensors show a
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kuznetsov, V. S., and Yu A. Shaposhnikova. "The Structure of the Content and Cost of Materials in Bending Reinforced Concrete Element with Variable Section Height." In Lecture Notes in Civil Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72910-3_26.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

He, Ben, Na Lv, and Ruilong Shi. "Design Optimization of Jacket Substructure of Offshore Wind Turbine." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_69.

Повний текст джерела
Анотація:
AbstractThe design optimization of the jacket substructure could reduce the cost of energy and the correlated carbon cost. The mass of jacket is optimized with respect to maximum stress and displacement responses. Wind and dead loads were applied at the top of the jacket referenced point. Wave load and foundation boundary were applied using Dload and UEL function in the Abaqus subroutine. Six different parameters were evaluated, including the pile height above mudline, the base width, brace thickness and diameter, and the main leg thickness and diameter. The parametrically optimized model has
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Luppichini, Marco, Marco Paterni, and Monica Bini. "Uncrewed aerial vehicles: an investigation of the parameter influences for coastal monitoring." In Monitoring of Mediterranean Coastal Areas: Problems and Measurement Techniques. Firenze University Press, 2024. https://doi.org/10.36253/979-12-215-0556-6.66.

Повний текст джерела
Анотація:
Data and information obtained from low-cost uncrewed aerial vehicles (UAVs), commonly called ‘drones’, can be used to support coastal monitoring on erosion study. The Structure from Motion (SfM) techniques allow to reconstruction of a high-resolution Digital Elevation Model (DEM) useful to assess shoreline e dune mass, starting from the images acquired by UAVs. Flight procedures, acquisition methods and ground references are important parameters to be carefully managed to achieve the necessary accuracy. However, the size of the areas to be monitored and the frequency of measurements require de
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Habyarimana, Ephrem, and Sofia Michailidou. "Genomic Prediction and Selection in Support of Sorghum Value Chains." In Big Data in Bioeconomy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71069-9_16.

Повний текст джерела
Анотація:
AbstractGenomic prediction and selection models (GS) were deployed as part of DataBio project infrastructure and solutions. The work addressed end-user requirements, i.e., the need for cost-effectiveness of the implemented technologies, simplified breeding schemes, and shortening the time to cultivar development by selecting for genetic merit. Our solutions applied genomic modelling in order to sustainably improve productivity and profits. GS models were implemented in sorghum crop for several breeding scenarios. We fitted the best linear unbiased predictions data using Bayesian ridge regressi
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Park, Minsoo, Seungsoo Lee, Woonggyu Choi, Yuntae Jeon, Dai Quoc Tran, and Seunghee Park. "Deep Learning-Based Pose Estimation for Identifying Potential Fall Hazards of Construction Worker." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0289-3.62.

Повний текст джерела
Анотація:
Fall from height (FFH) is one of the major causes of injury and fatalities in construction industry. Deep learning-based computer vision for safety monitoring has gained attention due to its relatively lower initial cost compared to traditional sensing technologies. However, a single detection model that has been used in many related studies cannot consider various contexts at the construction site. In this paper, we propose a deep learning-based pose estimation approach for identifying potential fall hazards of construction workers. This approach can relatively increase the accuracy of estima
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Park, Minsoo, Seungsoo Lee, Woonggyu Choi, Yuntae Jeon, Dai Quoc Tran, and Seunghee Park. "Deep Learning-Based Pose Estimation for Identifying Potential Fall Hazards of Construction Worker." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/10.36253/979-12-215-0289-3.62.

Повний текст джерела
Анотація:
Fall from height (FFH) is one of the major causes of injury and fatalities in construction industry. Deep learning-based computer vision for safety monitoring has gained attention due to its relatively lower initial cost compared to traditional sensing technologies. However, a single detection model that has been used in many related studies cannot consider various contexts at the construction site. In this paper, we propose a deep learning-based pose estimation approach for identifying potential fall hazards of construction workers. This approach can relatively increase the accuracy of estima
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Lu, Xingya, Peng Li, Shengrui Su, Haibo Jiang, and Fu Dong. "Optimization Design of Sand and Loess High Slope Based on Combination of Wide and Narrow Platfom——A Case Study of a High Slope in Yulin City." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2532-2_13.

Повний текст джерела
Анотація:
AbstractDue to the limited land resources available for engineering construction in Northern Shaanxi, engineering activities such as mineral resources development, basic engineering construction, slope reduction and building houses, and farming are often accompanied by the formation of a large number of Manually Excavated high slopes. Effective high slope design can reduce the waste of land resources, mitigate the damage to the natural environment, and reduce the project cost to a certain extent. Therefore, this paper takes a high sand loess slope in Yulin City, Shaanxi Province as an example,
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Height-cost"

1

Liu, Hui, Tao Li, Jie Tu, Man Feng, Bo Yu, and Chang Xu. "Binocular monitoring of tree height in transmission line corridors based on fast cost aggregation with superpixel segmentation." In International Conference on Electrical Engineering and Intelligent Systems (IC2EIS 2025), edited by Mohan Kolhe and Bing Gou. SPIE, 2025. https://doi.org/10.1117/12.3069003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Beamish, David. "Replica Tape – A Source of New Surface Profile Information." In SSPC 2014 Greencoat. SSPC, 2014. https://doi.org/10.5006/s2014-00004.

Повний текст джерела
Анотація:
Abstract Steel surfaces are frequently cleaned by abrasive impact prior to the application of protective coatings. The resultant surface profile, sometimes called an anchor pattern, is comprised of a complex pattern of peaks and valleys, which must be accurately assessed to ensure compliance with job or contract specifications. Measured parameters include profile height, peak count, peak density and increase in surface area (rugosity). In the protective coatings industry, replica tape is widely used for quantifying surface profile. However, as with most other means of field measurement, tape d
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Popperli, Maximilian, Raghavendra Gulagundi, Senthil Yogamani, and Stefan Milz. "Capsule Neural Network based Height Classification using Low-Cost Automotive Ultrasonic Sensors." In 2019 IEEE Intelligent Vehicles Symposium (IV). IEEE, 2019. http://dx.doi.org/10.1109/ivs.2019.8813879.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Yang, Youzhi, Qiang Wang, Boxian Lin, Bo Zhu, and Kaiyu Qin. "A Two-Step Strategy to Fuse Height Measurements for Low-Cost Quadrotors." In 2018 IEEE CSAA Guidance, Navigation and Control Conference (GNCC). IEEE, 2018. http://dx.doi.org/10.1109/gncc42960.2018.9018706.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zainuddin, K., M. H. Jaffri, M. Z. Zainal, N. Ghazali, and A. M. Samad. "Verification test on ability to use low-cost UAV for quantifying tree height." In 2016 IEEE 12th International Colloquium on Signal Processing & Its Applications (CSPA). IEEE, 2016. http://dx.doi.org/10.1109/cspa.2016.7515853.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhang, Can, Yang Du, Xiaoyang Chen, and Eng Gee Lim. "Cloud Motion Forecasting and Cloud Base Height Estimation Using Two Low-Cost Sky Cameras." In 2018 2nd IEEE Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2018. http://dx.doi.org/10.1109/ei2.2018.8582657.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Huang, Da-Wei, Ying-Jie Jiang, and Shao-Yun Fang. "Spacing Cost-aware Optimal and Efficient Mixed-Cell-Height Detailed Placement for DFM Considerations." In 2023 IEEE/ACM International Conference on Computer Aided Design (ICCAD). IEEE, 2023. http://dx.doi.org/10.1109/iccad57390.2023.10323879.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Øi, Lars Erik, Shirvan Shirdel, Sumudu Karunarathne, and Solomon Aromada. "Process Simulation, Dimensioning and Automated Cost Optimization of CO2 Capture." In 64th International Conference of Scandinavian Simulation Society, SIMS 2023 Västerås, Sweden, September 25-28, 2023. Linköping University Electronic Press, 2023. http://dx.doi.org/10.3384/ecp200008.

Повний текст джерела
Анотація:
A standard process for CO2 capture has been simulated with an equilibrium-based model in Aspen HYSYS. The simulation has been combined with equipment dimensioning and cost calculation in an integrated spreadsheet facility. New in this work is that Murphree efficiencies are varied to obtain automatic optimization of absorber height and inlet temperature. The optimum process was found as the process with minimum calculated sum of capital and operational cost over 25 years. The cost optimum process parameters for the standard process were calculated to 15 m absorber packing height, 13 K minimum a
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Debacker, Peter, Luca Matti, Syed Muhammad Yasser Sherazi, et al. "Low track height standard-cells enable high-placement density and low-BEOL cost (Conference Presentation)." In Design-Process-Technology Co-optimization for Manufacturability XI, edited by Luigi Capodieci and Jason P. Cain. SPIE, 2017. http://dx.doi.org/10.1117/12.2257961.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Shabani, Raha, Gamze Nalcaci, M. Kemal Leblebicioglu, and Muammer Ermis. "Cost Function Determination for a WIG in Predefined Path and Height Using Conjugate Gradient Method." In 2020 IEEE 6th International Conference on Control Science and Systems Engineering (ICCSSE). IEEE, 2020. http://dx.doi.org/10.1109/iccsse50399.2020.9171961.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Height-cost"

1

Panek and Young. PR-312-12208-R02 Limitations and Costs Associated with Raising Existing RICE Stack Heights. Pipeline Research Council International, Inc. (PRCI), 2014. http://dx.doi.org/10.55274/r0010556.

Повний текст джерела
Анотація:
Modeling of actual and hypothetical compressor station facilities concluded increasing reciprocating engine stack height as one potential mitigation measure to reduce modeled impacts below the primary 1-hour NO2 National Ambient Air Quality Standards (NAAQS). Increasing stack heights to between 50-75 feet appears to offer considerable relief based on typical facility configurations (e.g., compressor house height, stack parameters). This white paper discusses potential stack design criteria to be considered when increasing existing exhaust stack heights or planning considerations for new units.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Casas, Lyle Daryll, Jhanna Uy, Eldridge Ferrer, et al. Determining Optimal Mid-Upper Arm Circumference (MUAC) Cutoffs Maximizing Admission of Wasted Children to Treatment in the Philippines. Philippine Institute for Development Studies; Department of Health; National Nutrition Council; United Nations International Children's Emergency Fund, 2024. http://dx.doi.org/10.62986/dp2024.08.

Повний текст джерела
Анотація:
In low-resource settings, obtaining accurate weight-for-height Z-scores can be challenging. This is due to factors such as the lack of equipment to measure height and weight accurately and the minimal training of community health workers. To address this issue, the Mid-Upper Arm Circumference (MUAC) serves as a simple tool to identify wasted children. However, some researchers and practitioners argue that relying solely on MUAC may fail to identify many wasted children, leading to delayed intervention and potential death. This study aims to determine the most effective MUAC cutoffs for accurat
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Welch, David, and Gregory Deierlein. Technical Background Report for Structural Analysis and Performance Assessment (PEER-CEA Project). Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2020. http://dx.doi.org/10.55461/yyqh3072.

Повний текст джерела
Анотація:
This report outlines the development of earthquake damage functions and comparative loss metrics for single-family wood-frame buildings with and without seismic retrofit of vulnerable cripple wall and stem wall conditions. The underlying goal of the study is to quantify the benefits of the seismic retrofit in terms of reduced earthquake damage and repair or reconstruction costs. The earthquake damage and economic losses are evaluated based on the FEMA P-58 methodology, which incorporates detailed building information and analyses to characterize the seismic hazard, structural response, earthqu
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tanny, Josef, Gabriel Katul, Shabtai Cohen, and Meir Teitel. Micrometeorological methods for inferring whole canopy evapotranspiration in large agricultural structures: measurements and modeling. United States Department of Agriculture, 2015. http://dx.doi.org/10.32747/2015.7594402.bard.

Повний текст джерела
Анотація:
Original objectives and revisions The original objectives as stated in the approved proposal were: (1) To establish guidelines for the use of micrometeorological techniques as accurate, reliable and low-cost tools for continuous monitoring of whole canopy ET of common crops grown in large agricultural structures. (2) To adapt existing methods for protected cultivation environments. (3) To combine previously derived theoretical models of air flow and scalar fluxes in large agricultural structures (an outcome of our previous BARD project) with ET data derived from application of turbulent transp
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!