Готові списки джерел за темами / High Speed Homogenization

Зміст

Статті в журналах
Дисертації
Частини книг
Тези доповідей конференцій

Добірка наукової літератури з теми "High Speed Homogenization"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "High Speed Homogenization".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "High Speed Homogenization"

Almoselhy, Rania I. M. "High-Speed and High-Pressure Homogenization Techniques for Optimization of Food Processing, Quality, and Safety." Open Access Journal of Microbiology & Biotechnology 7, no. 4 (2022): 1–4. http://dx.doi.org/10.23880/oajmb-16000243.

Повний текст джерела

Анотація:

The current review presents the advantages and health benefits of the fast growing homogenization techniques for improving food processing using the high-speed homogenization (HSH) and the high-pressure homogenization (HPH) to overcome the main problems encountering food manufacturers, merchandizers and end consumers which are the short shelf-life or nonconformity of food products. HSH and HPH are considered as an efficient alternative tool to thermal processes that cause many undesirable effects such as nonenzymatic browning (NEB), off-flavor or degradation of bioactive components. HPH treatm

Стилі APA, Harvard, Vancouver, ISO та ін.

Lin, Minghui, Hanjun Gao, Xiao Shang, and Qiong Wu. "Simulation research on high speed centrifugal residual stress homogenization of turbine disk." Advances in Engineering Technology Research 6, no. 1 (2023): 516. http://dx.doi.org/10.56028/aetr.6.1.516.2023.

Повний текст джерела

Анотація:

At present, problems such as excessive residual stress, local stress concentration and machining deformation are common encountered in the production and processing of turbine disk. In order to further improve the machining quality and performance of turbine disk components, a high speed centrifugal stress homogenization and strengthening method with in-depth research and application value is proposed in this paper. The simulation research on the centrifugal stress homogenization effect of turbine disk forging blank is carried out, and the distribution of residual stress at different speeds is

Стилі APA, Harvard, Vancouver, ISO та ін.

Cui, Yao, Jianxue Liu, Sihai Han, Peiyan Li, Denglin Luo, and Jinying Guo. "Physical Stability of Chestnut Lily Beverages (CLB): Effects of Shear Homogenization on Beverage Rheological Behavior, Particle Size, and Sensory Properties." Foods 11, no. 20 (2022): 3188. http://dx.doi.org/10.3390/foods11203188.

Повний текст джерела

Анотація:

The processing parameters have a crucial influence on the stability and sensory quality of beverages. The focus of this study is to observe the rheological behavior, particle size distribution, stability, color change, and sensory evaluation of chestnut lily beverages (CLB) at different rotational speeds (0~20,000 rpm) using a high-shear homogeneous disperser. The CLB system exhibited non-Newtonian shear-thinning behavior. As the homogenization speed increased (0~12,000 rpm), the viscosity increased (0.002~0.059 Pa.s). However, when the rotational speed shear continued to increase (12,000~20,0

Стилі APA, Harvard, Vancouver, ISO та ін.

Hua, Xiao, Shanan Xu, Mingming Wang, Ying Chen, Hui Yang, and Ruijin Yang. "Effects of high-speed homogenization and high-pressure homogenization on structure of tomato residue fibers." Food Chemistry 232 (October 2017): 443–49. http://dx.doi.org/10.1016/j.foodchem.2017.04.003.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhou, Lei, Wangang Zhang, Jingyu Wang, Ruyu Zhang, and Jian Zhang. "Comparison of oil-in-water emulsions prepared by ultrasound, high-pressure homogenization and high-speed homogenization." Ultrasonics Sonochemistry 82 (January 2022): 105885. http://dx.doi.org/10.1016/j.ultsonch.2021.105885.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gardouh, Ahmed R., Samar H. Faheim, Ahmed T. Noah, and Mamdouh M. Ghorab. "INFLUENCE OF FORMULATION FACTORS ON THE SIZE OF NANOSTRUCTURED LIPID CARRIERS AND NANOEMULSIONS PREPARED BY HIGH SHEAR HOMOGENIZATION." International Journal of Pharmacy and Pharmaceutical Sciences 10, no. 4 (2018): 61. http://dx.doi.org/10.22159/ijpps.2018v10i4.23142.

Повний текст джерела

Анотація:

Objective: The main purpose of this work was to elucidate the effect of certain formulation factors on the size of nanostructured lipid carriers (NLCs) and nanoemulsions (NEs) by using high shear homogenization method.Methods: NLCs and NEs were prepared by high shear homogenization method using different liquid lipids types such as (Dermarol DCO® and Dermarol CCT®) at different concentrations. The effect of different concentration ratios of Tween 80 to Span 20 (2.5/1, 5/1, 10/1, 15/1) w/w % and different homogenization speeds (12 000, 18 000 rpm) on the resulted particle size were also studied

Стилі APA, Harvard, Vancouver, ISO та ін.

Patel, Rajendra, and Komal Parmar. "Development and Optimization of Enzalutamide Nanosuspension by Design of Experiments for Dissolution Enhancement." International Journal of Pharmaceutical Sciences and Drug Research 15, no. 06 (2023): 713–21. http://dx.doi.org/10.25004/ijpsdr.2023.150604.

Повний текст джерела

Анотація:

Enzalutamide is an anticancer molecule used for prostate cancer. The goal of the study was to develop a nanosuspension of enzalutamide in order to improve its solubility and dissolution properties. High-speed homogenization method was employed to formulate the nanosuspension. Preliminary studies suggested the amount of stabilizer, homogenization time and homogenization speed as critical variables to be taken for the optimization process. Box-Behnken design was employed for the optimization of process and formulation variables. Nanosuspension was evaluated for particle size, PDI, zeta potential

Стилі APA, Harvard, Vancouver, ISO та ін.

Boufi, Sami, and Alessandro Gandini. "Triticale crop residue: a cheap material for high performance nanofibrillated cellulose." RSC Advances 5, no. 5 (2015): 3141–51. http://dx.doi.org/10.1039/c4ra12918k.

Повний текст джерела

Анотація:

Nanofibrillated cellulose from triticale straws were produced using high-pressure homogenization and conventional high-speed blender for the disintegration process. The energy demand for the disintegration process was shown to depend on delignification and pretreatment.

Стилі APA, Harvard, Vancouver, ISO та ін.

Silva, T. M., N. N. P. Cerize, and A. M. Oliveira. "The Effect of High Shear Homogenization on Physical Stability of Emulsions." International Journal of Chemistry 8, no. 4 (2016): 52. http://dx.doi.org/10.5539/ijc.v8n4p52.

Повний текст джерела

Анотація:

<p class="03Abstract">Emulsions are thermodynamically unstable systems where droplet size is one of the main factors that affect its physical stability and consequently their quality. In this context, this work analyses the incorporation of a high shear homogenization step in the manufacturing process of an emulsion with the objective of maintaining its physical stability. In order to demonstrate the effects of this homogenization in the manufacturing process, the emulsion characterization was carried out by microscopy, rheology, laser diffraction and analytical photo-centrifugation tech

Стилі APA, Harvard, Vancouver, ISO та ін.

Katsimichas, Alexandros, Maria Katsouli, Nikolaos Spantidos, Maria C. Giannakourou, and Petros Taoukis. "Effect of High-Pressure Homogenization on the Functional and Emulsifying Properties of Proteins Recovered from Auxenochlorella pyrenoidosa." Applied Sciences 15, no. 1 (2024): 131. https://doi.org/10.3390/app15010131.

Повний текст джерела

Анотація:

Auxenochlorella pyrenoidosa is a microalga that stands out due to its high protein content. The objective of this work was to study the effect of high-pressure homogenization (HPH) on the recovery of proteins from A. pyrenoidosa and their application as functional emulsifiers. Untreated and HPH-treated (400–800 bar, 1 and 4 passes) aqueous cellular suspensions were incubated at 40 °C for 6 h. The aqueous extracts were collected, the proteins were precipitated at pH 3, and the Auxenochlorella pyrenoidosa protein concentrates (APPC) were lyophilized. Increasing HPH pressure and number of passes

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "High Speed Homogenization"

Pavlík, Ondřej. "Návrh kompozitní objímky rotoru vysokootáčkového rotačního stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382567.

Повний текст джерела

Анотація:

The diploma thesis focuses on manufacturing carbon fiber and epoxy composite material using filament winding method. Material properties of manufactured composite are ap-proximated using analytical and numerical homogenization models. Calculated material properties are applied to design and evaluate reserve factor of retaining sleeve for high speed brushless permanent magnet synchronous motor. Margin of safety of designed rotor is evaluated using composite failure criteria. Test stand for both static and dynamic testing is designed, static test stand is manufactured and assembled. Static stren

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "High Speed Homogenization"

Huppertz, Thom. "Homogenization of Milk: Low Pressure Homogenization (High-Speed Mixing, Ultrasonics, Microfluidizers, Membrane Emulsification)." In Reference Module in Food Science. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-818766-1.00145-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Huppertz, T. "Homogenization of Milk | Other Types of Homogenizer (High-Speed Mixing, Ultrasonics, Microfluidizers, Membrane Emulsification)." In Encyclopedia of Dairy Sciences. Elsevier, 2011. http://dx.doi.org/10.1016/b978-0-12-374407-4.00226-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Xiaolong, Jushang Li, Ruitong Zhang, et al. "Transient Quantitative Identification Algorithm Based on Laser Impulse Response." In Proceedings of the 2022 International Conference on Smart Manufacturing and Material Processing (SMMP2022). IOS Press, 2022. http://dx.doi.org/10.3233/atde220835.

Повний текст джерела

Анотація:

In order to improve the measurement accuracy of transient heat flow based on laser pulse response technology, a dynamic calibration algorithm of heat flow based on pulse response of fiber semiconductor laser is proposed. The system uses a high-power fiber semiconductor laser to generate modulated excitation, and quantitatively detects the transient heat flow energy in the form of pulsed radiation. The light intensity of the light source is adjusted by the homogenization of the light spot, and the energy measurement is completed with a Gardon meter. The data acquisition card and signal analysis

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "High Speed Homogenization"

Xincai, Zhao, Wen Weifeng, Chang Lihua, et al. "Laser Beam Homogenization Technology and its Application in High Speed Photography." In 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC). IEEE, 2019. http://dx.doi.org/10.1109/cleoe-eqec.2019.8871712.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sitnikov, Maksim A., and Anouar Belahcen. "Carbon Fiber Homogenization for Modelling Sleeve of High-Speed Electrical Machines." In 2022 International Conference on Electrical Machines (ICEM). IEEE, 2022. http://dx.doi.org/10.1109/icem51905.2022.9910859.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Qiao, J., P. A. Jaanimagi, R. Boni, J. Bromage, and E. Hill. "Beam-homogenization and space-charge–broadening calibration for accurately measuring high-intensity laser pulses using a high-speed streak camera." In CLEO: Science and Innovations. OSA, 2012. http://dx.doi.org/10.1364/cleo_si.2012.cm4d.8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ejim, Chidirim, Jinjiang Xiao, Woon Lee, and Wilson Zabala. "Delaying Multiphase Pump Gas-Lock in High-GVF Flows Using High-Speed Operation." In Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213660-ms.

Повний текст джерела

Анотація:

Abstract Many pumping systems tend to lose pressure boosting capability at high intake gas volume fractions (GVF) resulting in gas-lock. Delaying occurrence of gas-lock is beneficial to extending the operating envelope of these pumping systems. This study presents the results of operating a multiphase pump at speeds higher than typical, conventional field applications, in addition to incorporating a flow-conditioning device at pump inlet. These attributes delayed occurrence of multiphase gas-lock to intake GVFs up to 98%. The multiphase pump tested had a 5.38-inch housing outer diameter and sh

Стилі APA, Harvard, Vancouver, ISO та ін.

Lacarelle, Arnaud, and Christian O. Paschereit. "Increasing the Passive Scalar Mixing Quality of Jets in Crossflow With Fluidics Actuators." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45583.

Повний текст джерела

Анотація:

Jets in crossflow are widely used in the industry for homogenization or cooling tasks. Recently, pulsating jets have been investigated as a mean to increase the scalar mixing efficiency of such configurations, whether for a single jet or for an array of jets. To avoid the disadvantages of mechanically actuated flows (costs, maintenance), a new injector based on a fluidics oscillator has been designed. Four injectors have been implemented in a generical jet in crossflow configuration and the mixing efficiency of the setup was compared with the one of the same setup equiped with standard non osc

Стилі APA, Harvard, Vancouver, ISO та ін.

Tuominen, J., P. Vouristo, T. Mäntylä, S. Ahmaniemi, J. Vihinen, and P. H. Andersson. "Corrosion Properties of HVOF Sprayed and Nd-YAG Laser Remelted High-Chromium Nickel-Chromium Coatings." In ITSC2001, edited by Christopher C. Berndt, Khiam A. Khor, and Erich F. Lugscheider. ASM International, 2001. http://dx.doi.org/10.31399/asm.cp.itsc2001p1203.

Повний текст джерела

Анотація:

Abstract Thermal spray processes are widely used to deposit high-chromium nickel-chromium coatings to improve high temperature oxidation and corrosion behaviour. However, in spite of the efforts made to improve the present spraying techniques, such as HVOF and plasma spraying, these coatings may still exhibit certain defects such as unmelted particles, oxide layers at splat boundaries, porosity and cracks, which are detrimental to corrosion performance in severe operation conditions. Due to low process temperature only mechanical bonding is obtained between the coating and substrate. Laser rem

Стилі APA, Harvard, Vancouver, ISO та ін.

Zimmermann, Stephan, Sven Schmettlach, Sebastian Weber, et al. "Homogenization of Coating Properties in Three-Cathode Atmospheric Plasma Spraying by Use of Advanced Diagnostics and Numerical Simulation—Investigations of Suspension Plasma Spraying (SPS)." In ITSC2015, edited by A. Agarwal, G. Bolelli, A. Concustell, et al. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0452.

Повний текст джерела

Анотація:

Abstract Goal of this work is to homogenize properties of three-cathode plasma sprayed coatings on basis of advanced diagnostics and numerical simulations. After a brief description of the general approach to achieve this objective, selected aspects of the current work are presented. Thereby the paper is focused on the self developed suspension injection TriplexII setup, in the special determination of the plasma and in measurement plus presentation of the suspension-particle-behavior. In the suspension plasma diagnostic part (CT-Computed Tomography) the different temperature profiles and geom

Стилі APA, Harvard, Vancouver, ISO та ін.

Shih, Chun-Ching, and D. L. Bullock. "Effect of mode rotation on FEL unstable resonators." In OSA Annual Meeting. Optica Publishing Group, 1985. http://dx.doi.org/10.1364/oam.1985.tuv2.

Повний текст джерела

Анотація:

The mode rotation technique has been used in high power chemical lasers to homogenize the density fluctuation of the gain medium and also lessen the cavity misalignment effect due to the mirror jittering. The output beam quality can thus be greatly improved. For free electron laser (FEL) systems, the gain homogenization is not possible because the medium (electron beam) moves with the optical field at nearly the light speed. Also, it is not necessary because initial FEL experiments have shown good beam qualities (~ 1.2). However, high power FEL systems require very long resonators which, combi

Стилі APA, Harvard, Vancouver, ISO та ін.

Waqar, Taha, Syed Sohail Akhtar, Abul Fazal M. Arif, and Khaled S. Al-Athel. "Hybrid Alumina Composites for Cutting Tool Inserts: Material Design and Development." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87255.

Повний текст джерела

Анотація:

A successful approach to the development of reinforced materials for enhanced cutting tool inserts requires the formulation and application of innovative concepts at each step of material design development. In this paper, reinforced ceramic-based cutting tools with enhanced thermal and structural properties are developed for high-speed machining applications using a computational approach. A mean-field homogenization, effective medium approximation and J-integral based fracture toughness evaluation using an in-house code are used for predicting the effective structural and thermal properties

Стилі APA, Harvard, Vancouver, ISO та ін.

Tuominen, J., P. Vuoristo, T. Mäntylä, M. Kylmälahti, J. Vihinen, and P. H. Andersson. "Properties of Nickel Superalloy Coatings As-Sprayed and with Nd-YAG Laser Remelting." In ITSC 2000, edited by Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0589.

Повний текст джерела

Анотація:

Abstract Thermal spray processes are widely used to protect materials and components against wear, corrosion and oxidation. Despite the use of the latest developments of thermal spraying, such as HVOF and plasma spraying, these coatings may in certain operation conditions show inadequate performance, e.g. due to insufficient bond strength and/or mechanical properties and corrosion resistance inferior to those of corresponding bulk materials. The main cause for a low bond strength in thermal sprayed coatings is the low process temperature, which results only in mechanical bonding. Mechanical an

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!