Увійти

Готові списки джерел за темами / Information Technology|Engineering, General|Engineering, Electronics and Electrical / Статті в журналах

Статті в журналах з теми "Information Technology|Engineering, General|Engineering, Electronics and Electrical"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Information Technology|Engineering, General|Engineering, Electronics and Electrical.

Автор: Grafiati

Опубліковано: 14 вересня 2021

Оновлено: 1 лютого 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Information Technology|Engineering, General|Engineering, Electronics and Electrical".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Zhang, Bai Jun, and Wang Wei. "Mechatronic Systems in Mechanical Engineering." Applied Mechanics and Materials 644-650 (September 2014): 134–36. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.134.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

With the continuous innovation and development of China's science and technology, as a set of information across many disciplines , mechanics , electronics and other technology for the integration of mechanical and electrical integration has been an unprecedented development , this technology has also been widely used in the engineering machinery. It makes reference to the technology of mechanical engineering automation or semi-automated as possible , thereby greatly increasing the accuracy and precision mechanical engineering jobs.This paper describes the key technologies and applications in mechatronics engineering machinery.

2

Oluwakemi, Towolawi K., Fawole Oluwatoyin Omoyeni, Fakehinde Olutola Babalola, and A. Olusanya Olamide. "An Assessment of the Use of Electronic Information Resources and Facilities by Engineering Scholars in Nigeria." Indian Journal of Information Sources and Services 9, no. 3 (November 5, 2019): 1–7. http://dx.doi.org/10.51983/ijiss.2019.9.3.641.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The purpose of this paper is to assess the use of electronic information resources and facilities among Engineering Scholars in Private Universities in Nigeria using Bells University of Technology, Ota, Nigeria as a Case Study. Scientific investigation involves careful and proper adoption of research design, use of standardized tools and texts in identifying adequate sample techniques for data analysis. In this survey a questionnaire was adapted, tested and employed to collect primary data of academics from Mechanical, Mechatronics, Biomedical, Telecommunications, Electrical-electronics and Computer engineering Departments of Bells University of Technology, Ota Ogun State, Nigeria. In all, a total of forty-two faculty members, associate and research staff participated from the college of Engineering. The questionnaires were distributed among forty-two faculty members from the six departments of the college of engineering, out of which 40 were returned and found to be valid, making a response rate 95.23%. Among the 40 respondents, 2 faculties do not use electronic information resources. Thus, response rate is reduced to 38 (95.00%). In addition individual interview and observation methods were also used to collect the required information. The results correspond with previous studies conducted in other countries. The Engineers still stick to the printed information sources, but they pay good attention to electronic resources. Most of them have access to computer and internet at the office and home. They are regular users of a variety of electronic technologies. Although faced with some challenges. Thus, the applied scientists perceive that modern technology made their work easier. The study focused only on the engineering faculty in the first private university of technology in Nigeria. The survey could be replicated among other faculties such as humanities and or in other private universities in Nigeria and on a larger sample for generalization. Keeping in view the positive trend of engineering towards modern technology, universities and libraries should be adequately funded to provide electronic resources and facilities in the science and applied science discipline. Special training programmes for engineering scholars should also be organized. This is the first study on this topic in a private university of technology in Nigeria. The results can also be used to design services and facilities in academic libraries and information centers in private universities and universities of technology in Nigeria and in other developing countries.

3

Serafin, Cestmir. "Teaching electrical engineering or technology in a fun way." New Trends and Issues Proceedings on Humanities and Social Sciences 7, no. 1 (July 2, 2020): 210–19. http://dx.doi.org/10.18844/prosoc.v7i1.4900.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Combining physical and mental activities as a prerequisite for a well-rounded personal development is the benefit of technical kits, especially electronic ones. Such a combination also pushes the limits of the students’ efficiency. When used correctly, the creativity of both students and teachers is developed on a superior developmental level of knowledge in terms of quality. Electrotechnical kits have many positive effects in school education, suitably supplement as well as support it, and are also one of its subject matters. Considering the fast, global development information technology is experiencing, there is a growing need to combine computer systems and electrotechnical kits in education. The goal of this paper is to provide a comparative and analytical insight into teaching general, primary-level technical subjects in the context of electrical engineering, especially of electrotechnical kits, and to define current trends in or approaches to the implementation of educational activities. Keywords: Technical Education, electrotechnical kits.

4

Quan, Shaohui. "A problem-based introduction to microwave technology for undergraduates." International Journal of Electrical Engineering & Education 51, no. 4 (October 2014): 383–94. http://dx.doi.org/10.7227/ijeee.0009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In China, Microwave Technology is a specialised basic course for the undergraduate student whose major is electronics and information engineering. At Beihang University (BUAA) it is arranged in the first semester of the junior year (i.e. the third of a four-year course) and mainly includes transmission line theory, the theory of waveguides, microstrip transmission lines, the analysis of microwave networks and microwave passive components. In this paper, a problem-based introduction to microwave technology is presented, with the aim of increasing the students’ interest and motivation to study this course. A pyramidal course structure for electrical engineering undergraduates in BUAA is then proposed, and the course orientation and outline of the Microwave Technology course incorporated within it. Questionnaire-based surveys demonstrate the positive effect of the course.

5

Ovaska, Seppo J. "Electronics and information technology in high-range elevator systems." Mechatronics 2, no. 1 (February 1992): 89–99. http://dx.doi.org/10.1016/0957-4158(92)90040-u.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Kawahito, Shoji, Isao Takayanagi, Hidekazu Takahashi, Shigetoshi Sugawa, Takeshi Misawa, Jun Ohta, Takayuki Hamamoto, Hiroshi Ohtake, Koichi Harada, and Atsushi Onoda. "Image Electronics; Information Sesing." Journal of the Institute of Image Information and Television Engineers 62, no. 8 (2008): 1189–97. http://dx.doi.org/10.3169/itej.62.1189.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Sugawa, Shigetoshi, Isao Takayanagi, Hidekazu Takahashi, Rihito Kuroda, Masayuki Ikebe, Takayuki Hamamoto, Takashi Komuro, et al. "Image Electronics Information Sensing." Journal of the Institute of Image Information and Television Engineers 67, no. 11 (2013): 972–82. http://dx.doi.org/10.3169/itej.67.972.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Sugawa, Shigetoshi, Hiroshi Ohtake, Masayuki Ikebe, Toshiaki Sato, Masahiro Kobayashi, Rihito Kuroda, Takayuki Hamamoto, et al. "Image Electronics Information Sensing." Journal of The Institute of Image Information and Television Engineers 70, no. 7 (2016): 609–22. http://dx.doi.org/10.3169/itej.70.609.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Kim, Donghwi, Ridha Kamoua, and Andrea Pacelli. "Design-Oriented Introduction of Nanotechnology into the Electrical and Computer Engineering Curriculum." Journal of Educational Technology Systems 34, no. 2 (December 2005): 155–64. http://dx.doi.org/10.2190/d1h1-yydt-eqw8-uyju.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Nanoelectronics has the potential, and is indeed expected, to revolutionize information technology by the use of the impressive characteristics of nanodevices such as carbon nanotube transistors, molecular diodes and transistors, etc. A great effort is being put into creating an introductory course in nanotechnology. However, practically all courses focus on the physics, chemistry, and materials science aspects of this discipline. On the other hand, a more abstract, design-oriented introduction is desirable for electrical and computer engineering majors. In order to teach design-oriented nanotechnology, the teaching curriculum must be extended to include new concepts. In particular, it is necessary to supply the design principles, device models, and software simulation tools. This article describes our approach for introducing nanotechnology system design into the Electrical and Computer Engineering undergraduate curriculum at Stony Brook University. The approach consists of developing a nanodevice library for SPICE-like simulator and a 3-week module on nanotechnology system design utilizing this library. The module will be woven into an existing course on Integrated Electronics.

10

Darwi, Apris Robi, and Efrizon Efrizon. "ANALISIS KEPUASAN PENGGUNA E-LEARNING SEBAGAI PENDUKUNG AKTIVITAS PEMBELAJARAN MENGGUNAKAN METODE EUCS." Voteteknika (Vocational Teknik Elektronika dan Informatika) 7, no. 1 (February 4, 2019): 25. http://dx.doi.org/10.24036/voteteknika.v7i1.103639.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In this research to make the improvement of convenience that would later give also the satisfaction of any user that has used and be active in e-learning information systems which have been applied in engineering Electronics ft unp. This research using the method of end user computing satisfaction that in short EUCS are used to measure the level of user satisfaction with knowing the contribution factors of content, accuracy, shape, ease of usage and timeliness to be thorough by the author to apply to the scope of the Department of electronics engineering ft unp. This research using quantitative research, then conducted a descriptive analysis, inductive analysis, multiple regression and hypothesis testing. The results of the analysis of the data indicates that the variable in the method of EUCS jointly contribute the same significance of 45% to the satisfaction of users of the e-learning information systems in the Department of electronics engineering achievements in the unp ft. from research that has been done, is expected to be contributed to the Administration's e-learnngi in order to improve the quality of e-learning on the campus of the State University of padang in General and in the Electrical Engineering Universitas Negeri Padang in particular. Keywords: information systems, End User Computing Satisfaction, E-learning.

11

Matsuda, Kenji. "Photochromic diarylethene as an information processing unit: Magnetic and electric switching." Pure and Applied Chemistry 80, no. 3 (January 1, 2008): 555–61. http://dx.doi.org/10.1351/pac200880030555.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Photochromic compounds reversibly change not only the absorption spectra but also their geometrical and electronic structures. This principle can be applied for the photoswitching of the physical properties of the molecular materials. In particular, photoswitching of the flow of information through the molecule is interesting because information processing using molecular devices is attracting interest in the molecular electronics field. The photoswitchings of the magnetic exchange interaction and the electrical conductance using photochromic diarylethene are described.

12

Ishihara, Hidenori. "Special Issue on Microrobots." Journal of Robotics and Mechatronics 15, no. 6 (December 20, 2003): 581. http://dx.doi.org/10.20965/jrm.2003.p0581.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Micromechatronics has become a key issue in engineering. Robotics and mechatronics are a global concern. Micromechatronics contributes especially to the development of electrical and mechanical systems through miniaturization and advanced functions. Micromechatronics was defined by Prof. Fukuda, Prof. Fujita et. al in the 1980's. In 1980's, Microelectromechanical Systems (MEMS) was developed in the USA and then expanded to Japan and Germany. In the same time frame, devices based on precious machining technology were miniaturized in Japan and Switzerland as Michromachine. MEMS combines electronics and mechatronics and promotes new-conceptual devices such as intellectual sensors, e.g., pressure and acceleration sensors. Precious machining has improved manufacturing and achieved the find control. Thorough these development, Micromechatronics was born as an integrated technology. This special issue introduces basic technologies and applications of micromechatronics, which includes such vital technologies as mechanical, electric, and electrical engineering, machining, and MEMS. This issue, which features several topics on micromechatronics, will give readers a welcome chance to acquaint themselves with state-of-the-art information on micromechatronics. This issue contains nine technical papers on micro robots, intelligent microsensors, and their applications, together with related letters. It opens with a paper on microsensors by Fujiyoshi et al. and the application of miniaturized motors to a robotic hand by Nishibori et al. Included also are articles on micro robots by Aoyama, Torii, Wakimoto and Guo, work on unique micromanipulation systems by Nakamura et al., and the application of micro units to robotic systems by Yamada et al. Letters discuss objectives and achievements of micro robot contests held in Japan that serve to popularize and disseminate unique mechanisms and new concepts in this exciting field. I am certain this issue will provide readers with information that is both interesting and informative. In closing, I would like to thank the authors, members of the editorial board, and the publisher, without whose hard work and careful consideration this issue would not have been possible.

13

Ikeda, Susumu, Hiroshi Yamaki, Kazuo Konishi, Hideyuki Hayashi, Susumu Tsuchida, Koichi Ono, Tomohiro Kimura, Masahumi Shimotashiro, Masahiro Konishi, and Shin Ohno. "The Recent Progress of Image Information and Television. 1. Image Electronics. 1-4. Consumer Electronics." Journal of the Institute of Image Information and Television Engineers 52, no. 8 (1998): 1089–97. http://dx.doi.org/10.3169/itej.52.1089.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Fujisawa, Shoichiro, Kazuo Kawada, and Yoshihiro Ohnishi. "Special Issue on Education Based on Practical Exercise on Sensing and Control." Journal of Robotics and Mechatronics 31, no. 3 (June 20, 2019): 375. http://dx.doi.org/10.20965/jrm.2019.p0375.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Control engineering and sensing engineering improve productivity and save resources and energy in industry, and they are also deeply related to the solving greater societal, economic, and environmental problems. Control engineering and sensing engineering have become dynamic forces that enrich various phases of life through interdisciplinary or cross-sectional study. Furthermore, in recent years, due to the development of information technology, as symbolized by terms such as “big data” or “AI,” “sensing and control at a higher level” has become possible, premised by big data processing that is faster by orders of magnitude than conventional data processing. All this has increased the importance of control engineering and sensing engineering. In response to the development of the fields of control engineering and sensing engineering associated with the advance of the “information society,” education in these fields has also needed to be enhanced. On the national scale, the Ministry of Education, Culture, Sports, Science and Technology will introduce Japanese elementary school computational thinking education into elementary school in fiscal year 2020, and the new Courses of Study for High School Information Education in fiscal year 2022. At the same time, individual companies, educational institutions, etc. have also been experimenting with various forms of education in control engineering and sensing engineering. During these changing times, the most advanced studies related to the development of instruction and evaluation methods for educational materials on control engineering, sensing engineering, and control technology have been collected, and the present special issue was planned. This special issue is a collection of practical papers related to measurement and control education, including one paper on Model-Based Development education in a company and eight papers on education in an educational institution. These eight papers include two on education using a robot contest in a university, one on introducing measurement and control engineering education in a national institute of technology college, three on introducing it in a junior high school, and two on introducing it in an elementary school. We hope that this special issue serves to support the readers’ future efforts in control engineering and sensing engineering education, and we thank the authors and reviewers of the papers.

15

Djakov, Tatjana, Ivanka Popovic, and Ljubinka Rajakovic. "Micro-electro-mechanical systems (MEMS): Technology for the 21st century." Chemical Industry 68, no. 5 (2014): 629–41. http://dx.doi.org/10.2298/hemind131008091d.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Micro-electro-mechanical systems (MEMS) are miniturized devices that can sense the environment, process and analyze information, and respond with a variety of mechanical and electrical actuators. MEMS consists of mechanical elements, sensors, actuators, electrical and electronics devices on a common silicon substrate. Micro-electro-mechanical systems are becoming a vital technology for modern society. Some of the advantages of MEMS devices are: very small size, very low power consumption, low cost, easy to integrate into systems or modify, small thermal constant, high resistance to vibration, shock and radiation, batch fabricated in large arrays, improved thermal expansion tolerance. MEMS technology is increasingly penetrating into our lives and improving quality of life, similar to what we experienced in the microelectronics revolution. Commercial opportunities for MEMS are rapidly growing in broad application areas, including biomedical, telecommunication, security, entertainment, aerospace, and more in both the consumer and industrial sectors on a global scale. As a breakthrough technology, MEMS is building synergy between previously unrelated fields such as biology and microelectronics. Many new MEMS and nanotechnology applications will emerge, expanding beyond that which is currently identified or known. MEMS are definitely technology for 21st century.

16

Cheng, Le Feng, Jian Fu Peng, and Tao Yu. "Development of Special Users' Energy Saving Potential New Intelligent Diagnosis Detector Based on DSP2812 Technology." Advanced Materials Research 860-863 (December 2013): 667–75. http://dx.doi.org/10.4028/www.scientific.net/amr.860-863.667.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In order to solve the problem that special users energy saving potential is unable to diagnose automotive online, a new automatic diagnosis of energy saving potential method based on online DSP was proposed. This proposed method, together with a variety of techniques like modern power electronics, digital signal processing, high precision and fast sampling, high capacity storage, human-machine interaction technologies and so on, was applied to develop a corresponding special users energy saving potential diagnosis detector. The hardware design and DSP energy saving analysis software design of the detector were described firstly, and the results of field test were presented to demonstrate its feasibility. It is shown that, its advantages include easy-to-use, low cost, highly reliable, strong intelligence and easy to promote, thus can effectively improve the efficiency of electrical energy audit and the degree of information and automation.

17

Murakami, Hiroshi, Kouhei Suzuki, Makoto Tsumura, Shoji Shirai, Toshihiro Yamamoto, Shinji Okamoto, Shigeo Itoh, and Tadatugu Ichikawa. "The Recent Progress of Image Information and Television. 1. Image Electronics. 1-2. Information Display." Journal of the Institute of Image Information and Television Engineers 52, no. 8 (1998): 1073–80. http://dx.doi.org/10.3169/itej.52.1073.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Tanioka, Kenkichi, Hiromasa Funakoshi, Kazuya Yonemoto, Misao Kubota, Akira Kobayashi, Kazuaki Sawada, Ryuji Nishimura, Nobuo Nakamura, and Nobuhiko Mutoh. "The Recent Progress of Image Information and Television. 1. Image Electronics. 1-1. Information Pick-up." Journal of the Institute of Image Information and Television Engineers 52, no. 8 (1998): 1066–72. http://dx.doi.org/10.3169/itej.52.1066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Williams, James C. "From white gold to silicon chips: Hydraulic technology, electric power and Silicon Valley." Social Science Information 52, no. 4 (December 2013): 558–74. http://dx.doi.org/10.1177/0539018413497834.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Unlike most accounts of the origins of Silicon Valley, this essay insists that the valley today is rooted in the Gold Rush, and only through understanding this can scholars fully comprehend the roots of the innovation process that so characterizes the region today. The Gold Rush began a long gestation period in the region’s technical sciences that, with its physical, economic and geographic characteristics, comprised a petri dish in which innovations flourished. Early on communities of interest emerged among the original Argonauts around hydraulic engineering and among later adventurers around hydroelectric power, electric-power transmission, radio technology and microwave electronics. Over the years their members included mechanics, inventors, engineers, academics and entrepreneurs, and they found like-minded souls in San Francisco Bay Area technical and scientific organizations, social clubs and educational institutions, where they all overlapped with each other and created the foundations for the modern Silicon Valley.

20

Ling, Yin. "Advanced information processing of MEMS motion sensors for gesture interaction." Journal of Sensors and Sensor Systems 5, no. 2 (December 13, 2016): 419–31. http://dx.doi.org/10.5194/jsss-5-419-2016.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Abstract. Sensor-based gesture interaction technology has been widely adopted in consumer electronics. Nevertheless, bias, drift, and noise existing in sensor signals are difficult to eliminate, and accurate movement trajectory information is still needed to achieve flexible interaction application. This paper presents micro-electro-mechanical system (MEMS) motion sensor information processing algorithms designed on a gesture interaction system which integrates multiple low-cost MEMS motion sensors with ZigBee wireless technology to support embodied communication while acting together with machines. Sensor signal processing systems mainly solve noise removal, signal smoothing, gravity influence separation, coordinate system conversion, and position information retrieval. The attitude information which is an important movement parameter and required by position estimation is calculated with a quaternion-based extended Kalman filter (EKF). The effectiveness of the movement information retrieval of this gesture interface is verified by experiments and test analysis, both in static and moving cases. In the end, related applications of the described sensor information processing are discussed.

21

Cholilurrahman, R. Ahmad. "Pelayanan Kepada Masyarakat Berbasis Pengetahuan Teknik Elektro dan Komputer di Desa Segoro Tambak, Kecamatan Sedati Kabupaten Sidoarjo, Propinsi Jawa Timur." AKSIOLOGIYA : Jurnal Pengabdian Kepada Masyarakat 2, no. 1 (January 29, 2018): 60. http://dx.doi.org/10.30651/aks.v2i1.1245.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

regency. The majority of the population are farmers. If viewed from the geographical situation, then this village is located near the Madura Sea. Where the weather conditions of Segoro Tambak village tend to be hot and dry, with access roads leading to the village quite easily even though the streets are still much damaged and dusty. The position of the village on a macro lane road to the direction of the Airport and City District and City Province. This condition gives an indication that the regional concession (sub-district) of Segorotambak Village has strategic function and role. While seen from the boundaries of the administrative area of Segorotambak Village are: North side: Tambakoso Village / Sungai Buntung, East: Madura Strait, South side: Banjar Kemuning Village and Juanda Airport, West: Pranti Village and Tambak Sawah Village. The problem is access to technology in this village is still lacking with the lack of facilities such as cafe, hotspot, place of printing and others. In addition, the majority of the villagers' education is only graduated from elementary school, where they prefer to work after graduating from primary school and do not continue to the higher level. This can be understood because the village of Segoro Tambak is a village where the daily livelihood of the population is to manage the fishponds, no wonder if their children are involved to help sustain the family economy with the majority of the population is farmers, the level of education also affect the lives of citizens , because hereditary have the same life with their parents, and very few who get higher education. In addition, if continuing higher education, more choose social sciences - humanities than the science of technology, whereas the development of the world of electronics in the sense of the development of information and communication technology is growing rapidly. As an evaluation, we lecturers from the Department of Electrical Engineering, FTI, ITATS held a community service activity as a form of dharma of three universities, packaged in real work college activities (KKN) - community empowerment learning (PPM) to Karang Taruna as the target audience community by holding "Services To The Community, Knowledge Based Electrical And Computer Engineering".The final result shows that the villagers of Segoro Tambak who are not familiar with the basic electronics knowledge of the participants of Karang Taruna have started to be trained and develop skills in basic electronics. In the field of computer through this training, they are able to understand and operate Microsoft Excel and Microsft Word, properly and correctly. In the knowledge dissemination of electric power installations, Segoro Tambak villagers have had the awareness to apply and pay attention to the safety, safety in installation and usage of electricity in their own homes. Residents are expected to install the correct electrical halcyon for safety.

22

Zauner, Klaus-Peter. "Molecular Information Technology." Critical Reviews in Solid State and Materials Sciences 30, no. 1 (March 9, 2005): 33–69. http://dx.doi.org/10.1080/10408430590918387.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Стахов, Алексей Петрович. "МОЙ ПУТЬ В БОЛЬШУЮ НАУКУ". RADIOELECTRONIC AND COMPUTER SYSTEMS, № 2 (21 червня 2019): 6–17. http://dx.doi.org/10.32620/reks.2019.2.01.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The article is a summary of Alexey Stakhov scientific way, who in 1961 graduated from Radio Engineering Faculty Kharkiv Aviation Institute with honors and became the first graduate of the faculty who in 1972, at the age of 32, defended his doctoral thesis on the specialty “computer engineering” and in 1974 received academic title of professor in the department of information-measuring systems (Taganrog Radio Engineering Institute).From 1961 to 1963 he worked as an engineer at the famous space company “Design Bureau of Electrical Instrument Engineering” (now the firm “Khartron”). From 1963 to 1966 he studied in the graduate school of the Technical Cybernetics Department of the Kharkiv Institute of Radio Electronics under the supervision of Professor Alexander A. Volkov.In 1971, in connection with the completion of his doctoral thesis, Alexey Stakhov was elected to the post of the Head of Information-Measuring Technology Department of Taganrog Radio Engineering Institute (1971-1977).Alexey Stakhov became the first Soviet professor who in early 1976 was selected by the USSR Ministry of Education for a 2-month work at Vienna Technical University.At the final stage of his stay in Austria, A. P. Stakhov delivered the extensive lecture “Algorithmic Measurement Theory and the Foundations of Computer Arithmetic” at the joint meeting of Computer and Cybernetic Societies of Austria. With this lecture, international recognition of the Stakhov’s scientific direction began.The USSR Ambassador to Austria, Mikhail Efremov, sent the extensive letter to the USSR State Committee on Science and Technology with a proposal to patent Prof. Stakhov’s inventions abroad. The results of the patenting exceeded all expectations. The 65 patents, granted by the patent offices of the USA, Japan, England, France, Germany, Canada, and other countries protect the priority of the scientific direction, created by A.P. Stakhov.In more detail with the scientific achievements of Prof. A.P. Stakhov can be found by reading his biographical article in English Wikipedia https://en.wikipedia.org/wiki/Alexey_Stakhov and its page in google citation https://scholar.google.com.ua/citations?user=oDcIzrUAAAAJ&hl=uk.

24

Vaezi-Nejad, S. M., M. Cullinan, and P. Bishop. "Telematics Education I: Teaching, Learning and Assessment at Postgraduate Level." International Journal of Electrical Engineering & Education 42, no. 2 (April 2005): 132–46. http://dx.doi.org/10.7227/ijeee.42.2.2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In the context of recent developments in the Department of Computing, Communications Technology and Mathematics at London Metropolitan University, telematics describes the discipline resulting from the coming together of computing, communications technology, electronics, multimedia and information technology. The purpose of this paper is threefold: first, to outline the research and development projects undertaken by the Telematics Research Group. Secondly, to describe our new MSc programme with its dual pathways of digital communication networks and data communications and industrial applications. Thirdly, to discuss the group's approach to teaching, learning and assessing our postgraduate students who are studying telematics-related subjects.

25

Yang, Jucheng, Anthony T. S. Ho, Hui Cheng, Sook Yoon, and Lu Liu. "Advanced Information Technology Convergence 2017." Journal of Electrical and Computer Engineering 2017 (2017): 1–2. http://dx.doi.org/10.1155/2017/3736075.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Niranjanamurthy, M., N. M. Niveditha, M. P. Amulya, and A. R. Namitha. "Technological University and Its Affiliated Engineering Colleges Event Tracking System Using Blockchain Technology." Journal of Computational and Theoretical Nanoscience 17, no. 9 (July 1, 2020): 4493–99. http://dx.doi.org/10.1166/jctn.2020.9104.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Now a day’s people getting all information’s through web applications. The objective of this work is to develop a system that will provide the details of Engineering colleges and Universities in Karnataka and the complete information of all the events happening in different colleges. Events like conference, fest etc. All the details will be provided in this system. In TUECETS Users or visitors can easily get to know currently happening events and events which are to be held later. Universities and affiliated Engineering colleges administrator can post the details of the events in this system through BC. Administrator will be responsible to maintain all the posts and events details. Events can be posted in the system only after the approval of the administrator through Blockchain. It will be very useful to all users to know the events and activities details of particular university.

27

Hayashibara, Yasuo, Shuro Nakajima, Ken Tomiyama, and Kan Yoneda. "Hands-on Education of Robotics Department for Four Years of College." Journal of Robotics and Mechatronics 23, no. 5 (October 20, 2011): 789–98. http://dx.doi.org/10.20965/jrm.2011.p0789.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In this paper, we introduce engineering education at the Department of Advanced Robotics, Chiba Institute of Technology. At the department, we try to teach useful knowledge and provide laboratory work leading to useful experience. One purpose of the curriculum is to enable students to design a system with a mechanism, control circuit, and computer programming. We then provide many lectures related to system design – control engineering, mechanics, mechanical dynamics, electronic circuits, information engineering, mechanical drawing, and so on – and provide laboratory work on related theory in the lectures. Laboratory work helps students understand abstract theories that are difficult to understand based on desk study alone. This laboratorywork continues fromthe first to fourth years. In addition, we provide many project studies. Some students try to develop their own systems through extracurricular studies. Through the project, students obtain much knowledge and experience. After introducing our curriculum, we discuss the results of this curriculum.

28

Das, Sujit, and Elizabeth Mao. "The global energy footprint of information and communication technology electronics in connected Internet-of-Things devices." Sustainable Energy, Grids and Networks 24 (December 2020): 100408. http://dx.doi.org/10.1016/j.segan.2020.100408.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

THADURI, ADITHYA, A. K. VERMA, V. GOPIKA, RAJESH GOPINATH, and UDAY KUMAR. "STRESS FACTOR AND FAILURE ANALYSIS OF CONSTANT FRACTION DISCRIMINATOR USING DESIGN OF EXPERIMENTS." International Journal of Reliability, Quality and Safety Engineering 20, no. 03 (June 2013): 1340003. http://dx.doi.org/10.1142/s0218539313400032.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Reliability prediction using traditional approaches were implemented at earlier stages of electronics. But due to advancements in science and technology, the above models are outdated. The alternative approach, physics of failure provides exhaustive information on basic failure phenomenon with failure mechanisms, failure modes and failure analysis becomes prominent because this method depends on factors like materials, processes, technology, etc., of the component. Constant fraction discriminators which is important component in NFMS needs to study failure characteristics and this paper provides this information on failure characteristics using physics of failure approach. Apart from that, the combined physics of failure approach with the statistical methods such as design of experiments, accelerated testing and failure distribution models to quantify time to failure of this electronic component by radiation and temperature as stress parameters. The SEM analysis of the component is carried out by decapsulating the samples and studied the impact of stress parameters on the device layout.

30

Аshcheulov, А. А., M. Ya Derevianchuk, D. А. Lavreniuk, and I. S. Romaniuk. "Electric current transformation by anisotropic electrically conductive medium." Технология и конструирование в электронной аппаратуре, no. 5-6 (2020): 28–32. http://dx.doi.org/10.15222/tkea2020.5-6.28.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The authors consider the aspects of electric current distribution in electrically conductive anisotropic medium and establish how geometrical factors affect its longitudinal and transverse components. In the case of an a×b×с rectangular plate, its selected crystallographic axes are located on the plane of the side face a×b, whereas one of these axes is oriented at an angle α to the edge a. Applying a certain potential difference to the upper and lower end faces of the plate causes the appearance of longitudinal and transverse components of the internal electric current. The paper demonstrates the possibility of transforming the magnitude of the electric current and a way to optimize this magnitude. The transformation coefficient of such a device is determined by the anisotropy of the electrical conductivity of the plate and the coefficient of its shape k = a/b. The authors consider a few versions of anisotropic dielectric transformer design and offer their equivalent electric circuits. Another suggested transformer design is spiral in shape, compact and is characterized by high transformation coefficient value n. For example, at external radius r1 = 12,5 mm, internal radius r2 = 2 mm, height b = 2 mm and plate thickness c = 2,0 mm, its transformation coefficient n = 103. The information is given on existing monocrystalline and artificial anisotropic materials that can be used for the proposed device. High-temperature superconducting materials characterized by a high value of residual resistance anisotropy hold special promise in this case. Using the described transformation effect will significantly expand the possibilities of practical application of the considered electroohmic phenomenon. This will lead to the emergence of a new generation of devices for microwave technology, electronics and power engineering.

31

"Research Group Introduction : Power Electronics Laboratory, Dept. of Electrical, Electronics and Information Engineering, Nagaoka University of Technology." IEEJ Transactions on Industry Applications 132, no. 8 (2012): NL8_8. http://dx.doi.org/10.1541/ieejias.132.nl8_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Aciu, Lia Elena, and Petre Lucian Ogrutan. "A Case Study of Thinking out of the Box in Electrical Engineering." TEM Journal, August 27, 2021, 1257–62. http://dx.doi.org/10.18421/tem103-32.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The current context of rapid evolution of IT technologies and devices (Information Technology) imposes changes in engineering education. Education for the development of creativity becomes a requirement. This paper presents a new concept for the development of creativity by introducing an optional homework for Applied Electronics students, the final year of undergraduate studies. The homework requires electronic design of an application in the field of art of each student's diploma project. The paper presents the results of this initiative and the analysis of students' feedback. A statistical pilot study was organized that highlighted students' opinions about creativity as well as students' reasons for doing or not doing the optional homework.

33

"Research Group Introduction : Information Engineering and Control Engineering Teaching Staffs, Department of Electronics and Control Engineering, Ibaraki National College of Technology." IEEJ Transactions on Industry Applications 130, no. 12 (2010): NL12_11. http://dx.doi.org/10.1541/ieejias.130.nl12_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

"Research Group Introduction : Mechatronics Laboratory, Dept. of Electrical, Electronics and Information Engineering, Nagaoka University of Technology." IEEJ Transactions on Industry Applications 136, no. 10 (2016): NL10_5. http://dx.doi.org/10.1541/ieejias.136.nl10_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Waller, David R., Sima Zakani, Nerissa Mulligan, Brian Frank, Jake Kaupp, Roderick Turner, and Richard Hornsey. "COMPARING AND ALIGNING OUTCOMES OF TWO ENGINEERING AND TECHNOLOGY DISCIPLINES IN ONTARIO." Proceedings of the Canadian Engineering Education Association (CEEA), February 22, 2018. http://dx.doi.org/10.24908/pceea.v0i0.9690.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Abstract –The separate development of engineering and technology programs in Ontario has made transfer between these program types a complicated process. The process often requires assessment on a case-by-case basis and considers different aspects of knowledge, skills, and performance. This study was conducted to determine the level equivalency between two engineering and technology disciplines with the purpose of informing the development of transfer policy and comprehensive bridging programs in the province. Outcomes, content, and function of engineering and technology programs in Ontario were analyzed using a common framework in two disciplines: mechanical and electrical. Material from 7 engineering and 10 technology programs, including syllabi, learning outcomes, and reports was collected and analyzed, along with publically available information about programs. Slightly less than 40% of the courses in representative first year Mechanical and first and second year Electrical/Electronics Technology programs had equivalency to courses in engineering degree programs. The level of cognitive process expected for problemsolving outcomes is higher in the engineering programs than technology programs, and vice versa for outcomes related to hands-on skills. Overall, the analysis indicated sufficient alignment between engineering and technology programs to suggest transfer students may have acquired the necessary skills and knowledge of introductory level courses that are similar in content. Through hybrid bridging subjects and tests on prior knowledge, engineering programs can ensure incoming transfer students meet all CEAB accreditation criteria.

36

"Research Group Introduction: Haga Laboratory (Power Conversion Laboratory), Dept. of Electrical, Electronics and Information Engineering, Nagaoka University of Technology." IEEJ Transactions on Industry Applications 138, no. 4 (2018): NL4_11. http://dx.doi.org/10.1541/ieejias.138.nl4_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 2, no. 1 (March 2004): c3. http://dx.doi.org/10.1109/lpel.2004.831246.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 2, no. 2 (June 2004): c3. http://dx.doi.org/10.1109/lpel.2004.835844.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 2, no. 3 (September 2004): c3. http://dx.doi.org/10.1109/lpel.2004.840318.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 2, no. 4 (December 2004): c3. http://dx.doi.org/10.1109/lpel.2004.841941.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 3, no. 1 (March 2005): c3. http://dx.doi.org/10.1109/lpel.2005.846679.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 3, no. 2 (June 2005): c3. http://dx.doi.org/10.1109/lpel.2005.853245.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 3, no. 3 (September 2005): c3. http://dx.doi.org/10.1109/lpel.2005.860647.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

"IEEE Power Electronics Society Information." IEEE Power Electronics Letters 3, no. 4 (December 2005): c3. http://dx.doi.org/10.1109/lpel.2006.870310.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

"IEEE Power Electronics Society Information." IEEE Journal of Emerging and Selected Topics in Power Electronics 9, no. 1 (February 2021): C3. http://dx.doi.org/10.1109/jestpe.2020.3044124.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

"IEEE Power Electronics Society Information." IEEE Journal of Emerging and Selected Topics in Power Electronics 9, no. 2 (April 2021): C3. http://dx.doi.org/10.1109/jestpe.2021.3063010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

"IEEE Power Electronics Society Information." IEEE Journal of Emerging and Selected Topics in Power Electronics 9, no. 4 (August 2021): C3. http://dx.doi.org/10.1109/jestpe.2021.3093708.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

"IEEE Power Electronics Society Information." IEEE Journal of Emerging and Selected Topics in Power Electronics 9, no. 3 (June 2021): C3. http://dx.doi.org/10.1109/jestpe.2021.3077153.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Nakayama, Wataru. "Heat in Computers: Applied Heat Transfer in Information Technology." Journal of Heat Transfer 136, no. 1 (October 21, 2013). http://dx.doi.org/10.1115/1.4025377.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Since the advent of modern electronics technology, heat transfer science and engineering has served in the development of computer technology. The computer as an object of heat transfer research has a unique aspect; it undergoes morphological transitions and diversifications in step with the progress of microelectronics technology. Evolution of computer's hardware manifests itself in increasing packing density of electronic circuits, modularization of circuit assemblies, and increasing hierarchical levels of system internal structures. These features are produced by the confluence of various factors; the primary factors are the pursuit of ever higher processing performance, less spatial occupancy, and higher energy utilization efficiency. The cost constraint on manufacturing also plays a crucial role in the evolution of computer's hardware. Besides, the drive to make computers ubiquitous parts of our society generates diverse computational devices. Concomitant developments in heat generation density and heat transfer paths pose fresh challenges to thermal management. In an introductory part of the paper, I recollect our experiences in the mainframe computers of the 1980s, where the system's morphological transition allowed the adoption of water cooling. Then, generic interpretations of the hardware evolution are attempted, which include recapturing the past experience. Projection of the evolutionary trend points to shrinking space for coolant flow, the process commonly in progress in all classes of computers today. The demand for compact packaging will rise to an extreme level in supercomputers, and present the need to refocus our research on microchannel cooling. Increasing complexity of coolant flow paths in small equipment poses a challenge to a user of computational fluid dynamics (CFD) simulation code. In highly integrated circuits the paths of electric current and heat become coupled, and coupled paths make the electrical/thermal codesign an extremely challenging task. These issues are illustrated using the examples of a consumer product, a printed circuit board (PCB), and a many-core processor chip.

50

"IEEE Power Electronics Letters publication information." IEEE Power Electronics Letters 2, no. 1 (March 2004): c2. http://dx.doi.org/10.1109/lpel.2004.831245.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.