Готові списки джерел за темами / ISO Standard Improvement

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "ISO Standard Improvement"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "ISO Standard Improvement".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "ISO Standard Improvement"

Jovanovic, V., and D. Shoemaker. "ISO 9001 standard and software quality improvement." Benchmarking for Quality Management & Technology 4, no. 2 (1997): 148–59. http://dx.doi.org/10.1108/14635779710174963.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ariza-López, Francisco Javier, Pablo Barreira González, Joan Masó Pau, et al. "Geospatial data quality (ISO 19157-1): evolve or perish." Revista Cartográfica, no. 100 (May 1, 2020): 129–54. http://dx.doi.org/10.35424/rcarto.i100.692.

Повний текст джерела

Анотація:

Given the circumstance that the process for the revision of the international standard ISO 19157 is currently open, this article presents a critical reflection on its content, application and some challenges posed by the new types of data (e.g. big data, BIM data, etc.), that also have a geospatial component and to which, therefore, this international standard can be applied as well. Proposals are put forward going along three lines of improvement, on the one hand the consideration of new data quality elements and on the other, the reinforcement of the interoperability of this international st

Стилі APA, Harvard, Vancouver, ISO та ін.

Ariza López, Francisco Javier, Pablo Barreira González, Joan Masó Pau, et al. "Geospatial data quality (ISO 19157-1): evolve or perish." Revista Cartográfica, no. 100 (May 1, 2020): 129–54. http://dx.doi.org/10.35424/rcarto.v0i100.692.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Eom, Tae Yong. "A Study on the Improvement of the Evaluation Indicators for Museums of Korea: Focusing on ISO 21246:2019." Korean Arts Association of Arts Management 66 (May 31, 2023): 177–219. http://dx.doi.org/10.52564/jamp.2023.66.177.

Повний текст джерела

Анотація:

The International Standard Organization (ISO) published two museum standards, ISO 18461:2016 - International museum statistics and ISO 21246:2019 - Key indicators for museums, which were developed through close cooperation with International Committee for Documentation (CIDOC) of the International Council of Museums (ICOM). This study aimed to introduce the major characteristics and details of ISO 21246 and to derive practical results for the improvement of museum evaluation in Korea by analyzing ISO 21246. ISO 21246 is the international standard for museum indicators, consisting of six clause

Стилі APA, Harvard, Vancouver, ISO та ін.

Hamadi, Adel S. "Selective Additives for Improvement of Gasoline Octane Number." Tikrit Journal of Engineering Sciences 17, no. 2 (2010): 22–35. http://dx.doi.org/10.25130/tjes.17.2.03.

Повний текст джерела

Анотація:

High octane blend base gasoline stocks are reformulated from 30% LSRN, 45% Reformate and 25% Powerformate on volume basis. ASTM standard and IROX 2000 analysis are performed to test blend stocks sample. Different additive types are used to improve octane number. These additives are tetraethyl lead, methylcyclopentadienyl manganese tricarbonyl; methyl alcohol, ethyl alcohol, iso-propanol, n-butanol, sec-butanol, tertiary butyl alcohol, tert-amyl alcohol, active amyl alcohol, iso-pentyl alcohol, isobutyl carbinol, benzol ,telone, xylene, amino benzene, N-N-dimethyl aniline, dimethyl ketone, and

Стилі APA, Harvard, Vancouver, ISO та ін.

Szkiel, Agata. "Use of the Pn-En Iso 9004:2010 Standard for Improvement of Competitiveness of the Food Industry Enterprises." Foundations of Management 5, no. 1 (2013): 69–81. http://dx.doi.org/10.2478/fman-2014-0007.

Повний текст джерела

Анотація:

Abstract Food industry companies, functioning in an ever-changing and uncertain environment, look for ways to increase their competitiveness, including the improvement of effectiveness and efficiency of the implemented food safety management systems. Directions that can be used for this purpose are provided by the PN-EN ISO 9004:2010 standard. In the first part of the elaboration presented the requirements for the food safety management system included in the PN-EN ISO 22000:2006, and then the guidance of the PN-EN ISO 9004:2010 standard for providing the enterprise management system in order

Стилі APA, Harvard, Vancouver, ISO та ін.

PENZHOYAN, G. A., G. Yu MODEL, and T. I. KOSTENKO. "IMPLEMENTATION OF INTERNATIONAL ISO 9001 STANDARD AS AN INSTRUMENT OF MEDICAL SERVICES QUALITY IMPROVEMENT." Kuban Scientific Medical Bulletin 25, no. 4 (2018): 97–101. http://dx.doi.org/10.25207/1608-6228-2018-25-4-97-101.

Повний текст джерела

Анотація:

In this research are presented the modern approaches to the management improvement in a medical institution for providing high quality medical services. Here are also presented the main stages and results of the international ISO 9001 standard implementation. The purposeful and systematic efforts for maintaining and improving the quality system management processes allow us to use ISO 9001 as a highly effective instrument for the constant improvement of medical care quality.

Стилі APA, Harvard, Vancouver, ISO та ін.

Fonseca, Luis Miguel, and José Pedro Domingues. "Listen to ISO 9001:2015 for organizational competitiveness: Correlation between change management and improvement." Proceedings of the International Conference on Business Excellence 11, no. 1 (2017): 916–26. http://dx.doi.org/10.1515/picbe-2017-0097.

Повний текст джерела

Анотація:

Abstract In their quest to achieve superior performance and business results, organizations have extensively adopted models such as ISO 9001 Quality Managements Standards. Research supports that Quality Management System brings significant benefits for organizations competitiveness and success and more than 1 million organizations of all activity sectors worldwide have implemented ISO 9001. In a world of increasingly complexity and interconnection, the revised ISO 9001:2015 International Standard aims to ensure that Quality Management Systems are flexible while remaining reliable. The concept

Стилі APA, Harvard, Vancouver, ISO та ін.

Ali, Hafizhuddin. "The Strategic Implementation Asset Management System Basis ISO 55000: A Case Study On Indonesian Railways Company." Journal of Business Management Review 2, no. 3 (2021): 226–44. http://dx.doi.org/10.47153/jbmr23.1022021.

Повний текст джерела

Анотація:

The purpose of this study is to investigate the implementation asset management system basis on ISO 55000. State-owned companies (SOE’s) in railways industry has a big asset across Sumatra, Java and Sulawesi Island. Railways SOE’s have a vision of becoming the best railroad service provider that focuses on customer service and meets stakeholder expectations. To relize the vision, Implementing ISO 55000 as asset management standards in corporation is important accordance to the vision in and mandatory of the Ministry of SOEs as stakeholders in managing strategic assets that are considered effec

Стилі APA, Harvard, Vancouver, ISO та ін.

Ruamchat, Kanon, Natcha Thawesaengskulthai, and Chaipong Pongpanich. "Development of Quality Management System Under ISO 9001:2015 and Joint Inspection Group (JIG) for Aviation Fuelling Service." Management and Production Engineering Review 8, no. 3 (2017): 50–59. http://dx.doi.org/10.1515/mper-2017-0028.

Повний текст джерела

Анотація:

Abstract The Joint Inspection Group (JIG) standard for aviation fuel quality management assists in the operational process and maintenance of aviation fuel from its point of origin and through distribution systems to airports. Currently, problems arise as the JIG standard and quality management in aviation fuel are isolated and have independent procedures. Merging the JIG standards with ISO 9001:2015 can override original JIG’s philosophy by connecting all quality assessment, and management parties involved, throughout the supply chain. This integration can harmonize auditing tasks, focusing o

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "ISO Standard Improvement"

Holubička, Pavel. "Vliv implementace ISO norem řady 9000 na zlepšování procesů a identifikace potenciálu zlepšení." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-150274.

Повний текст джерела

Анотація:

The diploma thesis examines the influence of established quality management system to improve processes and to further improve the performance of selected company VHL Ltd. Related analyzes and their results are considered as the main goals of the thesis. The first theoretical part of the thesis compares current approaches to quality management and explains basic terms. Introduction to the practical part is the characteristic of the chosen company. Next step is analysis of the impact of the system's implementation and comparison to the precertification state. Analysis uses CMMI model for measur

Стилі APA, Harvard, Vancouver, ISO та ін.

Marjanen, Yka. "Validation and improvement of the ISO 2631-1 (1997) standard method for evaluating discomfort from whole-body vibration in a multi-axis environment." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6250.

Повний текст джерела

Анотація:

Vibration exposure can occur at work, commuting between home and work, and in leisure activities. Any form of transportation will expose humans to some degree of vibration. Exposure to vibration can cause health problems, but more likely comfort problems. Health problems are normally related to back pain. Comfort on the other hand is related to both physiological and psychological factors, which can have a wide range of effects from a general annoyance to a reduced work capability. The standard ISO 2631-1 (1997) provides a guidance, which can be used to measure, evaluate and assess effects of

Стилі APA, Harvard, Vancouver, ISO та ін.

Dlugošová, Simona. "Publikace Základního profilu normy ISO/IEC 29110 v Eclipse Process Framework Composer." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-192438.

Повний текст джерела

Анотація:

This diploma thesis focus on matters of improving the software processes in very small enterprises sector. Its main goal is to provide the instruction for implementation of systematic processes and operations in project management and software implementation sphere to that type of company in Czech Republic. It is accomplished by the publication Basic profile of the ISO/IEC 29110 standard translated to Czech. The creation of this publication has been done in open source tool for control of methodical content Eclipse Process Framework Composer. Published profile is simultaneously referencing its

Стилі APA, Harvard, Vancouver, ISO та ін.

Callegaro, Silvia. "Quality assurance della formazione medica specialistica: applicazione della norma IS0 9001 e gestione della valutazione nella scuola di specializzazione in pediatria di Padova." Doctoral thesis, Università degli studi di Padova, 2008. http://hdl.handle.net/11577/3425606.

Повний текст джерела

Анотація:

Introduction - The issues of quality assurance and quality improvement are betweeen the leading points in guiding the European political process for the development of common strategies in higher education, known like Bologna Process, from the end of years '90. In post-graduate medical education there is an increasing interest in such issues, reflecting the imminent scene of a common European sanitary system, characterized from the circulation of the sanitary professionals in the European Countries, and the growing demand for excellence in the medical performances. Quality assurance in medi

Стилі APA, Harvard, Vancouver, ISO та ін.

Mertensová, Ivana. "Řízení jakosti ve výrobním podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-222344.

Повний текст джерела

Анотація:

Diploma thesis deals with quality management system in a manufacturing plant and on the basis of an assessment of the current state aims to propose a better system of quality control process and contribute to the further development of this firm.

Стилі APA, Harvard, Vancouver, ISO та ін.

Пучихина, А. А., та A. A. Puchikhina. "Внедрение интегрированной системы менеджмента в соответствии с ISO 45001 в АО «Институт реакторных материалов»". Master's thesis, б. и, 2020. http://hdl.handle.net/10995/94610.

Повний текст джерела

Анотація:

Объект исследования – система менеджмента безопасности труда и охраны здоровья АО «ИРМ». Цель данной работы является актуализация документации интегрированной системы менеджмента в соответствие с требованиями международного стандарта ISO 45001:2018. Методология проведения исследования – в работе использованы такие методы, как: изучение СМИ и литературы, анализ данных от предприятия, сравнение. Полученные результаты и их новизна – в работе раскрыта актуальная на сегодняшний день тема перехода предприятия на стандарт ISO 45001:2018. Новая версия стандарта была опубликована не так давно и вопрос

Стилі APA, Harvard, Vancouver, ISO та ін.

Somaraju, Dilip. "Prediction of Time, Cost and Effort needed for software organizations to transit from ISO 9001:2008 to ISO 9001:2015. : A Survey." Thesis, Blekinge Tekniska Högskola, Institutionen för programvaruteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-11705.

Повний текст джерела

Анотація:

Context. Several quality standards have been developed over the years in order to define quality metrics for an organization’s product and even processes. One of the famous standards among them is the ISO 9000 standards which started several years ago. Since its beginning, ISO standards have seen several upgrades. Currently ISO 9001:2008 is in use which is being upgraded to ISO 9001: 2015. Companies have to migrate to the new scheme within three years of the prescribed time in order to retain certification to the ISO 9001 standards. The present thesis is targeted at finding the expected change

Стилі APA, Harvard, Vancouver, ISO та ін.

Chan, Lin-hung. "The effectiveness of ISO 2000 quality system in improvement of customer services in private residential properties in Hong Kong /." View the Table of Contents & Abstract, 2006. http://sunzi.lib.hku.hk/hkuto/record/B38026284.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chan, Lin-hung, and 陳蓮雄. "The effectiveness of ISO 2000 quality system in improvement of customer services in private residential properties in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B45008851.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Vodička, Petr. "Zlepšování softwarových procesů ve velmi malých entitách - využití normy ISO/IEC 29110." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-193388.

Повний текст джерела

Анотація:

The diploma thesis is focused on software process improvement in very small entities. It contains description of benefits that can be achieved by implementing such improvements. The focus is on the use of the fairly new ISO/IEC 29110 international standard and the basic profile of ISO/IEC 29110 standard for software engineering in particular. The standard is also suitable for use in system engineering. However, such application is not discussed within this diploma thesis. The aim of the work was to promote dissemination of information regarding said standard in the Czech Republic. The thesis,

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "ISO Standard Improvement"

Mutafelija, Boris. Process improvement with CMMI v1.2 and ISO standards. Auerbach Publications, 2009.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tanner, S. J. The business improvement handbook: From ISO 9001 to world-class performance. BSI Standards Limited, 2014.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Burrill, Claude W. Achieving quality through continual improvement. John Wiley, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Piper, Lennart. Continual improvement with ISO 14000. IOS Press, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Harringon, H. J. ISO 9000 and beyond: From compliance to performance improvement. McGraw-Hill, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Malaysia. Unit Pemodenan Tadbiran dan Perancangan Tenaga Manusia., ed. The civil service of Malaysia: Towards excellence through ISO 9000 : improvements and development in the civil service of Malaysia, 1996. Malaysian Administrative Modernisation and Management Planning Unit, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

service), ScienceDirect (Online, ed. ISO 9000 quality systems handbook: Using the standards as a framework for business improvement. 6th ed. Butterworth-Heinemann, 2009.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

1936-, Burney Robert G., and American Society for Quality, eds. Using ISO 9001 in healthcare: Applications for quality systems, performance improvement, clinical integration, and accreditation. ASQ Quality Press, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Levett, James M. Using ISO 9001 in healthcare: Applications for quality systems, performance improvement, clinical integration, accreditation, and patient safety. ASQ Quality Press, 2014.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Voroncova, Yuliya, and Elena Horoshko. Russian language and speech culture for police officers. INFRA-M Academic Publishing LLC., 2024. https://doi.org/10.12737/2137809.

Повний текст джерела

Анотація:

The textbook includes theoretical and practical professionally oriented material aimed at deepening and systematizing knowledge of the norms of the modern Russian literary language. It is supplemented with illustrative material necessary for mastering the basics of business speech, and is intended for the formation and improvement of communicative competence. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation. It is intended for students, cadets and trainees of educational institutions of secondary vocational education,

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "ISO Standard Improvement"

Hys, Katarzyna. "ISO 9001 STANDARD MANAGEMENT SYSTEM CERTIFICATION – DATA ANALYSIS FOR SECTORS BY COUNTRY." In Quality Production Improvement - QPI, edited by Robert Ulewicz. Sciendo, 2019. http://dx.doi.org/10.2478/9783110680591-022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lai, Yeu-Pong, and Jui-Heng Tai. "Network Security Improvement with Isolation Implementation Based on ISO-17799 Standard." In Network-Based Information Systems. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-74573-0_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kasurinen, Jussi, Per Runeson, Leah Riungu, and Kari Smolander. "A Self-assessment Framework for Finding Improvement Objectives with ISO/IEC 29119 Test Standard." In Systems, Software and Service Process Improvement. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22206-1_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rosiawan, Muhammad. "Implementing Outcome-Based Education in Accordance with ISO 21001 Requirements." In Proceedings of the 19th International Symposium on Management (INSYMA 2022). Atlantis Press International BV, 2022. http://dx.doi.org/10.2991/978-94-6463-008-4_132.

Повний текст джерела

Анотація:

AbstractThis paper aims to discuss the implementation of Outcome-Based Education (OBE) in the relevant ISO 21001 requirements. These requirements include understanding the organization and its context, needs of students and other beneficiaries, actions to address risks and opportunities, delivery and assessment of learning, evaluation, and corrective/improvement actions. The research method examines the requirements of ISO 21001 relevant to the implementation of OBE and provides an example of its application in one of the study programs. The study results show that ISO 21001 in higher educatio

Стилі APA, Harvard, Vancouver, ISO та ін.

Fathani, Teuku Faisal, Dwikorita Karnawati, Wahyu Wilopo, and Hendy Setiawan. "Strengthening the Resilience by Implementing a Standard for Landslide Early Warning System." In Progress in Landslide Research and Technology, Volume 1 Issue 1, 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-16898-7_20.

Повний текст джерела

Анотація:

AbstractThe implementation of early warning systems is in line with the Sendai Framework for Disaster Risk Reduction (SFDRR) 2015–2030. The Sendai Framework Priority 4 emphasizes improvement of preparedness and anticipation of disasters by establishing communities’ resilience to disaster. The development of a simple, low-cost early warning system that is universally accessible is needed to achieve the goals of the Sendai Framework. Universitas Gadjah Mada, incorporated with the Indonesian Standardization Agency (BSN) and the Indonesian Disaster Management Authority (BNPB), has promoted a new s

Стилі APA, Harvard, Vancouver, ISO та ін.

Terrón-Macias, Victor, Jezreel Mejía, and Yadira Quiñonez. "Identifying Improvement Findings in the Traceability Record Regarding the ISO/IEC 29110 Standard: A Case Study." In Studies in Computational Intelligence. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-50590-4_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

von Collani, Elart, and Prank A. Palcat. "How Some ISO Standards Complicate Quality Improvement." In Frontiers in Statistical Quality Control 8. Physica-Verlag HD, 2006. http://dx.doi.org/10.1007/3-7908-1687-6_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Al-Haddad, Diala Basim, and Gul Ahmed Jokhio. "Durability Design Approach and Exposure Conditions in Eurocode, British Standard and ISO 13823 Standards: A Review." In BUiD Doctoral Research Conference 2023. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-56121-4_20.

Повний текст джерела

Анотація:

AbstractSeveral incidents of early deterioration of reinforced concrete structures have been reported in recent years. Consequently, the critical demand to incorporate durability in the structural design and construction approach has emerged. As a result, durability design provisions in many countries’ standards have gotten increasingly stringent. In the absence of clear standard guidelines for design engineers, insufficient design and failures or an expensive over-design to provide for the worst-case scenario may occur. This paper compares and critically reviews the durability design requirem

Стилі APA, Harvard, Vancouver, ISO та ін.

Plebani, Mario, Ada Aita, and Laura Sciacovelli. "Patient Safety in Laboratory Medicine." In Textbook of Patient Safety and Clinical Risk Management. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-59403-9_24.

Повний текст джерела

Анотація:

AbstractLaboratory medicine in the healthcare system has recently been recognized as a fundamental service in the clinical decision-making process. Therefore, the notion of patient safety in laboratory medicine must be recognized as the assurance that harm to patients will be avoided, safe care outcomes will be enhanced through error prevention, and the total testing process (TTP) will be continuously improved.Although the goal for patient safety is zero errors, and although laboratory professionals have made numerous efforts to reduce errors in the last few decades, current research into labo

Стилі APA, Harvard, Vancouver, ISO та ін.

Somasundaram, K., and N. Palaniappan. "Personal ID Image Normalization Using ISO/IEC 19794-5 Standards for Facial Recognition Improvement." In Mathematical Modelling and Scientific Computation. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28926-2_47.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "ISO Standard Improvement"

Morana, Roberto, Viviane C. M. Smith, and Ali Smith. "Evaluation of Precipitation Hardening Nickel Alloys for Use in Hydrogen Sulphide Containing Environments." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05497.

Повний текст джерела

Анотація:

Abstract The qualification of materials in accordance with NACE MR0175/ISO 15156 is commonly performed by subjecting candidate materials to stress corrosion testing under an applied load in either a standard test solution (e.g. NACE solution A or B) or a test environment simulating service conditions. The exposure times for standard NACE solution A or B can vary from a few days up to a month (720 hours), whilst the exposure time for simulated service conditions is typically one month. This is widely accepted in the Oil & Gas industry and supported by good field experience with alloys such

Стилі APA, Harvard, Vancouver, ISO та ін.

Barajas, David Ernesto Castellanos, Ludwing Alfonso López Carreño, and Javier Alexander Suárez Barajas. "Review: Advance of Well Integrity Management." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16907.

Повний текст джерела

Анотація:

ABSTRACT Well integrity is becoming one of the most relevant issues in Oil & Gas industries, requiring the integration of multidisciplinary teams in areas of subsoil operation, corrosion engineering, maintenance, and production to define and apply the integrity management strategy. Until 2013, the reference in well integrity had been the NORSOK D010 standard, which describes the minimum requirements for operation and performance of the well integrity barriers in the whole life cycle of the asset. On the other hand, operating companies have generated better management practices that were co

Стилі APA, Harvard, Vancouver, ISO та ін.

Rippon, I. J. "New ISO Cathodic Protection Standard for Offshore Pipelines." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04101.

Повний текст джерела

Анотація:

Abstract A new ISO CP standard for offshore pipelines will be issued in 2004. The new ISO standard encompasses the current, field proven, design practices of the major offshore oil and gas pipeline operators. The major changes from previous standards are in the areas of potential criteria, design current densities and in the coating breakdown factors. This paper explains the improvements in these areas and suggests a way forward for future publication of CP standards.

Стилі APA, Harvard, Vancouver, ISO та ін.

de Rincón, Oladis Troconis, Marianna Aboulhosn, Carmen Morales, et al. "Evaluation of Hydrophobic Concrete Coatings in Tropical Marine Environments." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08317.

Повний текст джерела

Анотація:

Abstract This paper reports an eight-year field- and laboratory-based study carried out to compare the performance of two proprietary hydrophobic coating systems (silane- and siloxane-based coatings), designed to reduce chloride ingress and reinforcement corrosion. Their behavior in the laboratory was also compared by using concrete of two different mixes (w/c = 0.40 and 0.65). Tests were carried out on a Portland cement concrete with a w/c ratio of 0.4 and exposed to a very aggressive tropical marine environment (average parameters: T &gt;28° C, RH &gt; 80%, time of wetness &gt; 6

Стилі APA, Harvard, Vancouver, ISO та ін.

Earle, Keith W. "ISO 9002 - Roadblocks and Resolutions." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93159.

Повний текст джерела

Анотація:

Abstract The impact of ISO 9000 within the European Community is having wide reaching implications. To participate in the European Market, ISO 9000 is becoming a requirement to entry. American companies are recognizing the value of ISO 9000 in their operations, including the improvements that can be achieved when combined with a Total Quality Management Process. Further, the ISO 9000 process will greatly improve efficiencies and effectiveness by identifying and deleting non-productive practices. Baker Performance Chemicals Incorporated (BPCI) is pursuing the process of ISO 9002 registration fo

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhao, L., T. Dunne, J. X. Ren, P. Cheng, Y. Liu, and H. L. Liu. "Advocating for the Integration of Dissolved Sulfur as a Critical Parameter in NACE MR0175/ISO 15156 for Improved Corrosion Severity Evaluation of Ni Alloys." In CONFERENCE 2025. AMPP, 2025. https://doi.org/10.5006/c2025-00053.

Повний текст джерела

Анотація:

Abstract The recent NACE MR0175/ISO 15156-2020 standards have introduced dissolved H2S concentration as a new sour severity metric alongside the conventional H2S partial pressure. This has been validated through simulations and several laboratory tests. However, our qualification of a sulfur-resistant Ni alloy 716 grade using both conventional low-pressure (2.4 ksi [16.5 MPa]) and field-pressure (15 ksi [103.4 MPa]) lab tests, following NACE TM0177 C-ring testing guidelines, has revealed potential issues when sulfur is present. Despite maintaining consistent sour severity, sulfur severity was

Стилі APA, Harvard, Vancouver, ISO та ін.

Marchebois, Hervé, Bruce Cowe, and Thierry Cassagne. "Local Hard Zones on TMCP Large Diameter Line Pipes: What Do We Know about Their Metallurgy and Microstructure?" In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17565.

Повний текст джерела

Анотація:

Abstract The manufacturing and field experience of steel plates used to manufacture line pipes produced by Thermo-mechanically Controlled Processing (TMCP) are well defined in industry standards and literature. Compared to the Quenched & Tempered heat treatment process, TMCP plates are designed with a leaner chemical composition combining micro-alloying elements, precipitation, recrystallization and phase transformation during rolling and accelerated cooling. Technical challenges and process improvements moved older generation TMCP pipes from coarse microstructures and presence of non-meta

Стилі APA, Harvard, Vancouver, ISO та ін.

Yabumi, Naoki, Kenichiro Yamauchi, Tsuyoshi Matsumoto, and Hiroyuki Tanabe. "Durability of Fluoropolymer Top Coat Systems Related to Standards." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16582.

Повний текст джерела

Анотація:

Abstract Many tall and large structures have been constructed and operated under harsh environmental conditions. It has been required to protect steel structures from a variety of corrosive environments over their service life. In order to meet such requirements, continuous research has been aimed at increasing coating system durability, extending service life, and reducing life-cycle costs. The solvent-borne FEVE (Fluoro-Ethylene Vinyl Ether) type fluoropolymer coatings) were invented as top coats of protective coating systems in 1983. Since then, much data has been gathered concerning FEVE s

Стилі APA, Harvard, Vancouver, ISO та ін.

Mitchell, Mike J., David Claydon, and Darren Ward. "A Critical Review of Current Performance Tests for Offshore Anti-Corrosive Coatings." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05021.

Повний текст джерела

Анотація:

Abstract Over the last few years within the offshore sector of the Protective Coatings industry, there have been a number of ISO and NACE anti-corrosive performance test standards, both under development and subject to imminent release, which are influencing how coatings are evaluated. Also, some Norwegian Standards, specifically for offshore under the Norsok banner, in particular Norsok M501 for coatings, has been widely used globally. This paper will critically review the current philosophies described, taking into consideration correlation with natural exposure, track record, validity of “a

Стилі APA, Harvard, Vancouver, ISO та ін.

Marchebois, Hervé, Christophe Mendibide, Bruce Cowe, and Carole Dessolin. "Is 22 HRC the Right Threshold for TMCP Large Diameter Pipes in Severe Sour Environment?" In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-18943.

Повний текст джерела

Анотація:

Abstract Technical challenges and process improvements moved older generation Thermo-Mechanically Controlled Processing (TMCP) pipes from coarse microstructures and presence of non-metallic inclusions and/or mid-thickness segregation, to finer, homogenized microstructures and improved properties. Despite such an improvement, local hard zones (LHZ) have recently been experienced in the Oil & Gas industry on large diameter line pipes manufactured from TMCP plates, resulting in an in-service failure due to sulfide stress cracking (SSC). After thorough investigations, it was confirmed the root

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "ISO Standard Improvement"

Mallory, Richard E. Service Quality Standards for the Public Sector. Asian Productivity Organization, 2025. https://doi.org/10.61145/szra3943.

Повний текст джерела

Анотація:

Governments around the world are seeking new ways to deliver efficient, effective, and transparent services. A new P-Insights report, Service Quality Standards for the Public Sector, introduces the ASQ/ANSI G1:2021 standard as a practical framework for improving service quality across all levels of government. The report explains how ANSI G1 enables public agencies to evaluate performance objectively using measurable outcomes, maturity scoring, and best practice workflows. Unlike traditional models such as ISO 9001, this approach allows for detailed analysis at the unit level, helping leaders

Стилі APA, Harvard, Vancouver, ISO та ін.

Wilson, Steven R., and Octavio Maizza-Neto. Enabling Enterprise Competitiveness in Latin America and the Caribbean through ISO Management System Standards. Inter-American Development Bank, 1999. http://dx.doi.org/10.18235/0008554.

Повний текст джерела

Анотація:

This paper was first presented at a conference sponsored by the MIF and the IDB to examine the impact of quality and the related issues of ISO management systems standards upon the competitiveness of small and medium-sized enterprises (SMEs) in the region. A program of assistance to support SMEs in improving their competitiveness through continuous improvement and the cost-effective uses of the ISO 9000 and ISO 14000 standards is introduced.

Стилі APA, Harvard, Vancouver, ISO та ін.

Lees-Deutsch, Liz, Rosie Kneafsey, and Laura Wilde. A TOOLKIT: For Professional Nurse Advocates: Undertaking Quality Improvement Work. Coventry University, 2025. https://doi.org/10.18552/chc/2025/0004.

Повний текст джерела

Анотація:

At the second national Professional Nurse Advocate Conference (PNA) (November, 2024) a co-creation Workshop was organised with delegates with the ambition of creating a set of Principles for PNAs who are leading Quality Improvement (QI) work. We heard that the role of PNAs undertaking QI, typically involves learning about systems and processes, which are unfamiliar to them when they first commence QI work. Sometimes QI work is based inter-departmentally or may have been a legacy of work generated across a wider organization – e.g., beyond their clinical area. We also learnt that in some commun

Стилі APA, Harvard, Vancouver, ISO та ін.

Morkun, Volodymyr S., Сергій Олексійович Семеріков, Svitlana M. Hryshchenko, and Kateryna I. Slovak. System of competencies for mining engineers. Видавництво “CSITA”, 2016. http://dx.doi.org/10.31812/0564/719.

Повний текст джерела

Анотація:

Topicality of the material, highlighted in this article is stipulated by the need to ensure effectiveness of educational process while preparing mining engineers. System of competencies for future mining engineers, taken as basis for high school sectoral standard for Mining 6.050301 update is theoretically substantiated and developed. Sources of state-of-the-art foreign educational system and technologies as well as scientific research results of local teachers have been analyzed, enabling development of new sectoral standard. Switching to new high school competencies-based sectoral standards

Стилі APA, Harvard, Vancouver, ISO та ін.

East, Sidonie. 'Is Transparency Enough? An Examination of the Effect of the Extractive Industry Transparency Initiative (EITI) on Accountability, Corruption and Trust in Zambia. Institute of Development Studies, 2023. http://dx.doi.org/10.19088/ictd.2023.055.

Повний текст джерела

Анотація:

The Extractive Industry Transparency Initiative (EITI) is the leading global transparency standard for the extractive industry. It aims to improve governance standards in the extractive industry by providing a public platform for information sharing and multi-stakeholder dialogue. However, the success of the initiative has been brought into question by numerous scholars. This paper aims to shed new light on this work by presenting a unique analytical framework. The framework hypothesises that improved transparency, through the EITI, can lead to improved extractive industry governance: increase

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang. L52052 Control of Horizontal Beam Width with Phased Array Transducers. Pipeline Research Council International, Inc. (PRCI), 2008. http://dx.doi.org/10.55274/r0010945.

Повний текст джерела

Анотація:

Accurate defect sizing is becoming more and more critical in pipeline welds due to the application of Engineering Critical Assessment, demanding deep sea applications, the arrival of high performance piping, and increased public safety demands. This project improved horizontal beam focusing for automated ultrasonic testing; curved arrays, focused lenses and electronic focusing using phased arrays were investigated. Two target applications were selected: thickwalled risers and tendons, and thinner walled high performance pipes for onshore. Extensive computer modeling was performed to optimize t

Стилі APA, Harvard, Vancouver, ISO та ін.

Tossey, Brett, and Ramgopal Thodla. PR-180-094506-R01 Challenges for Safe and Reliable On-Shore Pipeline Transport of Supercritical CO2. Pipeline Research Council International, Inc. (PRCI), 2010. http://dx.doi.org/10.55274/r0010712.

Повний текст джерела

Анотація:

There is interest within the pipeline industry in transporting supercritical CO2 in pipelines. A significant issue is the lack of an independent industry standard for supercritical CO2 pipelines. Existing industry standard for liquid and gas transmission are used for mechanical design requirements, but selected properties of supercritical CO2 make it a unique product. Impurities in the gas steam, materials selection, and leak detection in supercritical CO2 require special consideration. The objective of this project is to engage the supercritical CO2 industry in a workshop and use their knowle

Стилі APA, Harvard, Vancouver, ISO та ін.

Robson, Brendan. PR-363-17602-R02 Gap Analysis in Liquid Volume Proving Methods. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011466.

Повний текст джерела

Анотація:

The overall aim of the project is to identify the best practices in measurement system design and proving procedures in order to reduce measurement uncertainty. This is in recognition that improvements made to the calibration of flow meters would have a direct correlation in reducing system measurement uncertainty, improving overall pipeline balancing, and, amongst other benefits, reducing the minimum detection thresholds of leak detection systems. The project includes an extensive literature review of proving practices, standards, developments and case studies. This was balanced by an industr

Стилі APA, Harvard, Vancouver, ISO та ін.

Robson, Brendan. PR-363-17602-R03 Gap Analysis in Liquid Volume Proving Methods. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011467.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Swedberg, Dusty, Phillip Willink, and Wendy Schelsky. Avoiding and Minimizing Impacts to Aquatic Resources through Construction Design Standards. Illinois Center for Transportation, 2025. https://doi.org/10.36501/0197-9191/25-001.

Повний текст джерела

Анотація:

The primary objective was to summarize best management practices that avoid and minimize impacts on aquatic resources through construction design standards. The study involved a literature review and discussions with experts to identify knowledge gaps regarding the effects of road and bridge construction on aquatic resources. We examined how other states responded to similar challenges and the standard specifications they used. These recommendations were based on findings from different states and best practices accepted by regulatory agencies. The research reviewed each state’s processes and

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!