Увійти

Готові списки джерел за темами / ISO Standard Improvement / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: ISO Standard Improvement.

Статті в журналах з теми "ISO Standard Improvement"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "ISO Standard Improvement".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Jovanovic, V., and D. Shoemaker. "ISO 9001 standard and software quality improvement." Benchmarking for Quality Management & Technology 4, no. 2 (1997): 148–59. http://dx.doi.org/10.1108/14635779710174963.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Ariza-López, Francisco Javier, Pablo Barreira González, Joan Masó Pau, et al. "Geospatial data quality (ISO 19157-1): evolve or perish." Revista Cartográfica, no. 100 (May 1, 2020): 129–54. http://dx.doi.org/10.35424/rcarto.i100.692.

Повний текст джерела

Анотація:

Given the circumstance that the process for the revision of the international standard ISO 19157 is currently open, this article presents a critical reflection on its content, application and some challenges posed by the new types of data (e.g. big data, BIM data, etc.), that also have a geospatial component and to which, therefore, this international standard can be applied as well. Proposals are put forward going along three lines of improvement, on the one hand the consideration of new data quality elements and on the other, the reinforcement of the interoperability of this international st

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Ariza López, Francisco Javier, Pablo Barreira González, Joan Masó Pau, et al. "Geospatial data quality (ISO 19157-1): evolve or perish." Revista Cartográfica, no. 100 (May 1, 2020): 129–54. http://dx.doi.org/10.35424/rcarto.v0i100.692.

Повний текст джерела

Анотація:

Given the circumstance that the process for the revision of the international standard ISO 19157 is currently open, this article presents a critical reflection on its content, application and some challenges posed by the new types of data (e.g. big data, BIM data, etc.), that also have a geospatial component and to which, therefore, this international standard can be applied as well. Proposals are put forward going along three lines of improvement, on the one hand the consideration of new data quality elements and on the other, the reinforcement of the interoperability of this international st

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Eom, Tae Yong. "A Study on the Improvement of the Evaluation Indicators for Museums of Korea: Focusing on ISO 21246:2019." Korean Arts Association of Arts Management 66 (May 31, 2023): 177–219. http://dx.doi.org/10.52564/jamp.2023.66.177.

Повний текст джерела

Анотація:

The International Standard Organization (ISO) published two museum standards, ISO 18461:2016 - International museum statistics and ISO 21246:2019 - Key indicators for museums, which were developed through close cooperation with International Committee for Documentation (CIDOC) of the International Council of Museums (ICOM). This study aimed to introduce the major characteristics and details of ISO 21246 and to derive practical results for the improvement of museum evaluation in Korea by analyzing ISO 21246. ISO 21246 is the international standard for museum indicators, consisting of six clause

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Hamadi, Adel S. "Selective Additives for Improvement of Gasoline Octane Number." Tikrit Journal of Engineering Sciences 17, no. 2 (2010): 22–35. http://dx.doi.org/10.25130/tjes.17.2.03.

Повний текст джерела

Анотація:

High octane blend base gasoline stocks are reformulated from 30% LSRN, 45% Reformate and 25% Powerformate on volume basis. ASTM standard and IROX 2000 analysis are performed to test blend stocks sample. Different additive types are used to improve octane number. These additives are tetraethyl lead, methylcyclopentadienyl manganese tricarbonyl; methyl alcohol, ethyl alcohol, iso-propanol, n-butanol, sec-butanol, tertiary butyl alcohol, tert-amyl alcohol, active amyl alcohol, iso-pentyl alcohol, isobutyl carbinol, benzol ,telone, xylene, amino benzene, N-N-dimethyl aniline, dimethyl ketone, and

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Szkiel, Agata. "Use of the Pn-En Iso 9004:2010 Standard for Improvement of Competitiveness of the Food Industry Enterprises." Foundations of Management 5, no. 1 (2013): 69–81. http://dx.doi.org/10.2478/fman-2014-0007.

Повний текст джерела

Анотація:

Abstract Food industry companies, functioning in an ever-changing and uncertain environment, look for ways to increase their competitiveness, including the improvement of effectiveness and efficiency of the implemented food safety management systems. Directions that can be used for this purpose are provided by the PN-EN ISO 9004:2010 standard. In the first part of the elaboration presented the requirements for the food safety management system included in the PN-EN ISO 22000:2006, and then the guidance of the PN-EN ISO 9004:2010 standard for providing the enterprise management system in order

Стилі APA, Harvard, Vancouver, ISO та ін.

7

PENZHOYAN, G. A., G. Yu MODEL, and T. I. KOSTENKO. "IMPLEMENTATION OF INTERNATIONAL ISO 9001 STANDARD AS AN INSTRUMENT OF MEDICAL SERVICES QUALITY IMPROVEMENT." Kuban Scientific Medical Bulletin 25, no. 4 (2018): 97–101. http://dx.doi.org/10.25207/1608-6228-2018-25-4-97-101.

Повний текст джерела

Анотація:

In this research are presented the modern approaches to the management improvement in a medical institution for providing high quality medical services. Here are also presented the main stages and results of the international ISO 9001 standard implementation. The purposeful and systematic efforts for maintaining and improving the quality system management processes allow us to use ISO 9001 as a highly effective instrument for the constant improvement of medical care quality.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Fonseca, Luis Miguel, and José Pedro Domingues. "Listen to ISO 9001:2015 for organizational competitiveness: Correlation between change management and improvement." Proceedings of the International Conference on Business Excellence 11, no. 1 (2017): 916–26. http://dx.doi.org/10.1515/picbe-2017-0097.

Повний текст джерела

Анотація:

Abstract In their quest to achieve superior performance and business results, organizations have extensively adopted models such as ISO 9001 Quality Managements Standards. Research supports that Quality Management System brings significant benefits for organizations competitiveness and success and more than 1 million organizations of all activity sectors worldwide have implemented ISO 9001. In a world of increasingly complexity and interconnection, the revised ISO 9001:2015 International Standard aims to ensure that Quality Management Systems are flexible while remaining reliable. The concept

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Ali, Hafizhuddin. "The Strategic Implementation Asset Management System Basis ISO 55000: A Case Study On Indonesian Railways Company." Journal of Business Management Review 2, no. 3 (2021): 226–44. http://dx.doi.org/10.47153/jbmr23.1022021.

Повний текст джерела

Анотація:

The purpose of this study is to investigate the implementation asset management system basis on ISO 55000. State-owned companies (SOE’s) in railways industry has a big asset across Sumatra, Java and Sulawesi Island. Railways SOE’s have a vision of becoming the best railroad service provider that focuses on customer service and meets stakeholder expectations. To relize the vision, Implementing ISO 55000 as asset management standards in corporation is important accordance to the vision in and mandatory of the Ministry of SOEs as stakeholders in managing strategic assets that are considered effec

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Ruamchat, Kanon, Natcha Thawesaengskulthai, and Chaipong Pongpanich. "Development of Quality Management System Under ISO 9001:2015 and Joint Inspection Group (JIG) for Aviation Fuelling Service." Management and Production Engineering Review 8, no. 3 (2017): 50–59. http://dx.doi.org/10.1515/mper-2017-0028.

Повний текст джерела

Анотація:

Abstract The Joint Inspection Group (JIG) standard for aviation fuel quality management assists in the operational process and maintenance of aviation fuel from its point of origin and through distribution systems to airports. Currently, problems arise as the JIG standard and quality management in aviation fuel are isolated and have independent procedures. Merging the JIG standards with ISO 9001:2015 can override original JIG’s philosophy by connecting all quality assessment, and management parties involved, throughout the supply chain. This integration can harmonize auditing tasks, focusing o

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Pagounis, V., N. Merlemis, D. Anastasiou, Orthodoxia Arabatzi, V. Zacharis, and Maria Tsakiri. "Compact Testing of Total Station Instruments Using Folded Optics." Journal of Applied Engineering Sciences 12, no. 1 (2022): 71–76. http://dx.doi.org/10.2478/jaes-2022-0011.

Повний текст джерела

Анотація:

Abstract An optimized compact-based method is introduced that verifies the distance measuring precision of surveying instruments. The paper describes the improvement of the compact based method not only in establishing a compact facility by using shorter lengths and folded path but also in the assessment process by implementing the official ISO standard for electronic distance measuring equipment (ISO 17123-4). The method produces statistically comparable results to ISO standards and is suited for regular instrument checks in institutions with limited space available.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Kang, Min-Woo, and Yang-Ki Oh. "Validity of Elevator Noise Measurement Method in International Standards on High-Rise Residential Buildings." Sustainability 13, no. 17 (2021): 9806. http://dx.doi.org/10.3390/su13179806.

Повний текст джерела

Анотація:

Noise generated during elevator operation in high-rise residential buildings has a significant impact on the healthy and sustainable building environment of residents. However, there is still no clear standard for the measurement method. There are other international standards other than ISO 16032 on how to measurement elevator noise, but this standard relates to general construction equipment. In particular, it is not suitable as a method to measure elevator noise because it was proposed without considering the situation of modern high-rise residential buildings. In this study, by reflecting

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Ahmudi, Bambang Purwanggono, and Naniek Utami Handayani. "Effectiveness analysis of ISO 9001:2015 implementation at manufacturing industry." SHS Web of Conferences 49 (2018): 01008. http://dx.doi.org/10.1051/shsconf/20184901008.

Повний текст джерела

Анотація:

Globalization era requires many companies to improve service quality and resource management capabilities in order to gennerate public confidence in the products and commitments offered. The quality improvement program is contained in Quality Management System (QMS). QMS is developed in ISO 9001 standart certification.ISO 9001 is a standard that contains quality management system requirements issued by the International Organization for standarization (IOS). Companies that become the obyect of research is PT Sejahtera, this company is engaged in manufacturing.the company suffered several losse

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Barbosa, Jose. "Engineering assessment for ISO 50001 implementation." Universidad Ciencia y Tecnología 2023, Special (2023): 81–89. http://dx.doi.org/10.47460/uct.v2023ispecial.739.

Повний текст джерела

Анотація:

This paper recommends implementing an integrated management system based on the NTE INEN-ISO 50001 standard. ISO 50001 certification is an international standard that establishes the requirements for implementing an organization's energy management system (EMS). This standard focuses on improving energy efficiency, optimizing resource use, and reducing the environmental impacts associated with energy consumption. Some benefits of obtaining an ISO 50001 certification are Improved energy efficiency, cost savings, regulatory compliance: ISO 50001, innovation, employee participation, risk reductio

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Vera Delgado, Antonio Fernando, and Carlos Mario Zapata-Jaramillo. "A viability analysis of the ISO/IEC 29110 project management process: a case study in an automotive ecuadorian company." Scientia et Technica 28, no. 01 (2023): 31–37. http://dx.doi.org/10.22517/23447214.24544.

Повний текст джерела

Анотація:

Software process standards such as the ISO/IEC 29110 have been implemented by Very Small Entities (VSE) in order to develop quality software and achieve improvements in terms of time, budget, documentation, and other subjects. The generic profile group established in such a standard includes a set of profiles with situational factors of occurrence applicable to some VSEs. However, documented case studies of the ISO/IEC 29110 implementation in Latin America companies are limited, causing uncertainty about the viability of such a standard in VSEs established in the region. Different conditions o

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Yurnalisdel, Yurnalisdel, and Isdaryanto Iskandar. "Analisis Penerapan Sistem Manajemen Mutu ISO 9001:2015 Terhadap Kinerja Operasional Perusahaan." COMSERVA Indonesian Jurnal of Community Services and Development 2, no. 08 (2022): 1219–29. http://dx.doi.org/10.59141/comserva.v2i08.464.

Повний текст джерела

Анотація:

In the era of global competition, the quality of products owned by companies needs to be evaluated because of an increase in consumer awareness of the quality of products produced by companies. Currently, the ISO 9001:2015 standard has been used by many organizations ranging from small, medium to large all over the world. Several empirical literature studies that have been carried out explain the importance of quality management standards in optimizing continuous improvement of the company's operational performance, where the aim is to meet the needs and expectations of customers in the market

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Scripcariu, Mircea, Ioan Sevastian Bitir-Istrate, Cristian Gheorghiu, and Aida Maria Neniu. "The Environmental Impact Reduction obtained by implementing an Energy Management System. The advantages of using Energy Management and Energy Savings Standards when performing Industrial Energy Audits." E3S Web of Conferences 112 (2019): 04007. http://dx.doi.org/10.1051/e3sconf/201911204007.

Повний текст джерела

Анотація:

Energy audits are used world-wide for developing energy efficiency projects. Industrial consumers have complex energy supply, generation and distribution networks and a variety of energy use installations. Romanian industrial companies became more interested in the last years in implementing Energy Management Systems in accordance with ISO 50001 standard. This paper presents a comparison of using the current way of developing energy audits and the concepts provided by the ISO group of standards, by quantifying the environmental impact reduction generated by each methodology. Authors pointed ou

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Syahrullah, Yudi, April Yanti, Tigar Putri Adhiana, and Rani Aulia Imran. "GAP Analysis of Higher Education Quality Assurance System Implementation Against Educational Organization Management Standards ISO 21001:2018." Operations Excellence: Journal of Applied Industrial Engineering 14, no. 1 (2022): 67. http://dx.doi.org/10.22441/oe.2022.v14.i1.044.

Повний текст джерела

Анотація:

ISO 21001:2018 is an international standard for the management system of educational organizations that formal education organizations can apply to achieve their goals and functions to provide quality educational services. Currently, there are study programs with C accreditation and 2 study programs accredited B at Faculty of X under The University of Y. Hence, quality assurance at Faculty X still needs to be improved to achieve the highest accreditation. It is hoped that an education management system that refers to the ISO 21001:2018 standard can assist organizations in meeting these goals a

Стилі APA, Harvard, Vancouver, ISO та ін.

19

VOROBYOVA, Oksana. "NTERACTION OF ISO AND ESGIN THE HIGHER EDUCATION INDUSTRY: INTERNATIONAL EXPERIENCE." Cherkasy University Bulletin: Pedagogical Sciences, no. 2 (2020): 98–102. http://dx.doi.org/10.31651/2524-2660-2020-2-98-102.

Повний текст джерела

Анотація:

This article examines international studies on the standardization of quality management systems in higher education, namely: a comparison of The International Organization for Standardization (ISO) standards and the provisions of the Standards and Recommendations for Quality Assurance in the European Higher Education Area (The Standards) and guidelines for quality assurance in the European Higher Education Area (ESG). The standards ISO 9001, ISO 9001: 2000, ISO 9001: 2015 and ISO 21001 have been analyzed.The article analyzes the study of the interaction of ISO standards and the provisions of

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Tomic, Branislav, and Vesna K. Spasojevic Brkic. "Customer satisfaction and ISO 9001 improvement requirements in the supply chain." TQM Journal 31, no. 2 (2019): 222–38. http://dx.doi.org/10.1108/tqm-07-2017-0072.

Повний текст джерела

Анотація:

PurposeThe purpose of this paper is to investigate the influence of ISO 9001 quality improvement requirements in ISO 9001:2008, i.e. the corrective and preventive actions and internal audit, on customer satisfaction.Design/methodology/approachFor the purposes of the study, data were collected via a survey on 200 aerospace and transportation companies that belong to a Canadian multinational company supply chain. The relationships between the corrective and preventive actions and internal auditing, on the one hand, and customer satisfaction, on the other, were examined via the structural equatio

Стилі APA, Harvard, Vancouver, ISO та ін.

21

K, SULFATH K., Dr P. R. RAMAKRISHNAN, Dr P. M. SHAREEF, and Dr HARIHARA SHANMUGAM. "IMPACT OF ECONOMIC VALUE FROM THE SERVICE MANAGEMENT SYSTEM (SMS) IMPLEMENTATION IN THE IT SECTOR: AN ENVIRONMENTAL SUSTAINABILITY PERSPECTIVE." International Journal of Environmental Sciences 11, no. 1s (2025): 387–96. https://doi.org/10.64252/qwd53p46.

Повний текст джерела

Анотація:

The study is concerned with the impact of value of th eeconomy from the Service Management System (SMS) proceedings with the IT sector utilizing ISO standards which come under the Descriptive Research category. A Purposive sampling technique is applied in this study for its sample design. Final sample size of 427 respondents is considered for this study. This study provides important information and investment factors for successful adaption and successful certification of ISO 20000 standard for Indian IT companies. It is inferred that the most reactions supported towards improvement on result

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Pouliakis, Abraham, Elena Athanasiadi, Efrossyni Karakitsou, et al. "ISO 15189:2012 Management Requirements for Cytopathology Laboratory Information Systems." International Journal of Reliable and Quality E-Healthcare 3, no. 3 (2014): 37–57. http://dx.doi.org/10.4018/ijrqeh.2014070103.

Повний текст джерела

Анотація:

During the last decade, there is an increasing need for quality improvement of medical laboratories via the use of quality related standards. Recently regulatory bodies suggest and sometimes enforce the application of ISO 15189, which is designed especially for medical laboratories. Despite the standard does oblige the application of Laboratory Information Systems (LISs), it is evident that without a LIS it is difficult for laboratories to operate efficiently. Modern cytopathology laboratories form complex systems composed of a multidisciplinary human team coupled with medical modalities and c

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Sinaga, Rudolf, and Frangky Taan. "Penerapan ISO/IEC 27001:2022 dalam Tata Kelola Keamanan Sistem Informasi: Evaluasi Proses dan Kendala." NUANSA INFORMATIKA 18, no. 2 (2024): 46–54. http://dx.doi.org/10.25134/ilkom.v18i2.205.

Повний текст джерела

Анотація:

Implementing ISO/IEC 27001:2022 in information security management is crucial and timely due to the increasing cyber threats, the necessity for regulatory compliance, and the significance of information security as a competitive edge. The latest revision of this standard demands proper adaptation and implementation to ensure effective information security management across various organizations. This study examines the key components of ISO/IEC 27001:2022, including organizational context, leadership, planning, support, operations, performance evaluation, and improvement. It delves into the ap

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Riwayadi, Eko. "The Leadership Importance in International Organization for Standardization (ISO) Implementation: A Literature Review." Formosa Journal of Sustainable Research 3, no. 1 (2024): 125–44. http://dx.doi.org/10.55927/fjsr.v3i1.7730.

Повний текст джерела

Анотація:

In the era of globalization doing business, organization always needs to be competitive, succeed and maintain sustainability as long as possible. Organization shall implement continual improvement in their excellent quality of management strategy to achieve their goals. Organization also needs to adapt to the international best practice. International Organization for Standardization or ISO is one of the best standard to be referred and implement their standard in the organization. In many cases implementation of ISO facing issues related to leadership commitment. Several research argued that

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Zivkovic, Snezana, Ljiljana Takic, and Nenad Zivkovic. "The improvement of environmental performances by applying ISO 14001 standard: A case study." Chemical Industry and Chemical Engineering Quarterly 19, no. 4 (2013): 541–52. http://dx.doi.org/10.2298/ciceq120513088z.

Повний текст джерела

Анотація:

This paper presents the analysis of the advantages of applying ISO 14001 system in an environmental protection management system. The environmental protection management system which is not licensed, i.e., compatible with the principles and standard pre-conditions considerably increases the plausibility for ecological risk. There are some issues that remain to be solved in the areas which are not expressed by financial values only but also have a non-financial character with the aim of expanding markets, company image improvement and improvement of the environmental performance indicators. By

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Kurniawan, Wawan. "Sistem Manajemen Keamanan Pangan ISO 22000 Untuk Industri Yang Berhubungan Dengan Pangan." JURNAL TEKNIK INDUSTRI 1, no. 2 (2011): 155–60. http://dx.doi.org/10.25105/jti.v1i2.7002.

Повний текст джерела

Анотація:

This paper was discussing about ISO 22000. ISO 22000 is an international standard that defines the requirements of a food safety management system covering all organizations in the food chain from “farm to table”. The standard combines generally recognized key elements to ensure food safety along the food chain, including: interactive communication, system management, control of food safety hazards through pre-requisite programmes and HACCP plans, continual improvement and updating of the food safety management system. ISO 22000:2005 is also for companies seeking to integrate their quality man

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Strygul, Larysal, Viktorija Aleksandrova, and Tetiana Zhadan. "ISO 9000 SERIES STANDARDS IN THE SPHERE OF TOURISM AND HOSPITALITY OF UKRAINE IN THE CONCEPT OF TOTAL QUALITY MANAGEMENT TQM." Bulletin of the National Technical University "Kharkiv Polytechnic Institute" (economic sciences), no. 1 (January 10, 2023): 40–44. http://dx.doi.org/10.20998/2519-4461.2023.1.40.

Повний текст джерела

Анотація:

The article analyzes the current state of application and determination of the prospects for the implementation of ISO 9000 series standards in the field of tourism and hospitality of Ukraine in the concept of general quality management of TQM. It has been proven that the problem of post-war revival and development of processes of general management of the quality of services in the field of tourism and hotel and restaurant business of our state is quite urgent, based on its financial, economic and social importance for the reconstruction of the economy of our country. It was studied that as a

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Prasetya, Syarief Gerald. "ANALISA ATAS PELAKSANAAN AUDIT MUTU INTERNAL UNTUK MENGEVALUASI EFEKTIFITAS PENERAPAN SISTEM MANAJEMEN MUTU ISO 9001:2000 (Studi Kasus pada PT. Murni Cahaya Pratama)." Jurnal Ilmiah Binaniaga 6, no. 1 (2019): 71. http://dx.doi.org/10.33062/jib.v6i1.269.

Повний текст джерела

Анотація:

Quality of Internal Audit is an activity which is very important and is a requirement in the implementation of ISO 9001:2000 standard, which aims to monitor the quality of the verifying the suitability and effectiveness of the implementation of the system of quality compared to the reference standards and policies that have been determined. Quality of Internal Audit is an assessment process and system to see whether the processes and systems in line with documented procedures and to see the effectiveness of the procedure. By doing this assessment, the company will know the condition or situati

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Özkan, Füsun Zehra. "ANALYSIS OF MOTIVATION AND COMMUNICATION ASPECTS IN UNIVERSITIES THROUGH ISO 21001:2018 MANAGEMENT SYSTEM STANDARD AND TOTAL QUALITY MANAGEMENT." International Journal of Professional Business Review 10, no. 5 (2025): e05393. https://doi.org/10.26668/businessreview/2025.v10i5.5393.

Повний текст джерела

Анотація:

Objectives: This study aims to evaluate the ISO 21001:2018 Educational Organizations Management System Standard through the lens of organizational communication and employee motivation. Specifically, it investigates how the standard influences communication structures within educational institutions and contributes to their overall success. Theoretical Framework: Grounded in the principles of Total Quality Management (TQM), the research explores the integration of communication and motivation as core components of institutional quality. While ISO 21001:2018 is based on TQM—which seeks continuo

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Gueorguiev, Tzvetelin. "Improving the internal auditing procedure by using SIPOC diagrams." Journal of Innovations and Sustainability 4, no. 2 (2018): 35–43. http://dx.doi.org/10.51599/is.2018.04.02.35.

Повний текст джерела

Анотація:

Auditing is intended to provide a better understanding of a system and to provide insights on the possibilities for improvement. The University of Ruse has implemented a management system in compliance with ISO 9001 since 2004. Thus, for more than a dozen of years it has experience in auditing its management system – both by internal and external audits. In 2017 ISO has published the draft standard ISO / DIS 21001 that defines the requirements for a quality management system of any type of educational organization. This article presents a proposal for improvement of the current internal auditi

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Glevitzky, Ioana, Adina Sârb, and Maria Popa. "Study Regarding the Improvement of Bottling Process for Spring Waters, through the Implementation of the Occupational Health and Food Safety Requirements." Safety 5, no. 2 (2019): 32. http://dx.doi.org/10.3390/safety5020032.

Повний текст джерела

Анотація:

The design, development and deployment, alongside with preventive maintenance of equipment helps with controlling safety issues in water bottling processes. However, these aspects are not-enough to prevent accidents; they must be closely related to the implementation of quality, occupational health and safety, and food security standards. The approach presented in this paper was to show a summary of the assessment of the risks of injury and professional illness for all within the organization according to the ISO 45001:2018 standard. Also, a statistical analysis was performed to evaluate the o

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Virliani, Putri, Shinta Johar Alif Rahadi, Rina Rina, et al. "Proposed Quality Plan for Shipbuilding in Indonesia Based on ISO 10005:2018." Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan 20, no. 3 (2023): 359–68. http://dx.doi.org/10.14710/kapal.v20i3.58691.

Повний текст джерела

Анотація:

Ensuring quality is of utmost importance for the shipbuilding sector, as it involves addressing both the quality of processes and the final products to achieve efficient and cost-effective manufacturing. It has become a standard practice for shipyards to adopt certifiable management systems. ISO 9001:2015 sets out the necessary criteria for a Quality Plan, which is influenced by the company's overall quality policy and contractual obligations. In this context, ISO 10005:2018 offers guidance that can be utilized within the framework of quality plans to meet the specific requirements of a projec

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Cerruto Serrano, Mayra Cristina. "La norma ISO 21001:2018 en el sistema de gestión de calidad de las instituciones educativas particulares." Revista Científica Retos de la Ciencia 6, no. 12 (2022): 1–15. http://dx.doi.org/10.53877/rc.6.13.20220701.01.

Повний текст джерела

Анотація:

In Ecuador, quality is a value-adding component in education, the same one which is legally constituted in the corpus of current educational regulations. To this end, the state has promulgated a set of policies that guide, instruct, and control the achievement of quality goals in the different educational services. This research work aims to identify the scope and benefits of the ISO 21001: 2018 standard in the Quality Management System of private educational institutions in Ecuador. The methodological route is designed from a qualitative, non-experimental level, complemented by analyzing auth

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Naumann, Michael Matthias, Stelian Mircea Olaru, Georg Sven Lampe, and Fabian Pitz. "Analysis of Relationships between Non-conformities, Process Maturity and Continual Improvement in Information Security Management Systems." Proceedings of the International Conference on Business Excellence 18, no. 1 (2024): 494–506. http://dx.doi.org/10.2478/picbe-2024-0043.

Повний текст джерела

Анотація:

Abstract In the current global context, companies need a defined minimum level of information security to recognize and deal with related threats and risks. Due to market, customer or legal requirements, specifications and requirements for information security are implemented uniformly according to standards such as the information security management standard ISO/IEC 27001 or industry-specific standards such as Trusted Information Security Assessment Exchange - TISAX, ISO IEC 27019 Energy Utility Information Security Standard. The conformity to these standard requirements within the establish

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Walawalkar, Amol, Prof R. M. Swamy, and Dr M. S. Kuttimarks. "Improving Organizational Performance with ISO 9001 QMS Audits." International Journal for Research in Applied Science and Engineering Technology 12, no. 11 (2024): 2392–99. https://doi.org/10.22214/ijraset.2024.65667.

Повний текст джерела

Анотація:

Abstract: The effective implementation of a Quality Management System (QMS) is essential for organizations striving for excellence and competitiveness, as it significantly enhances overall performance and, in turn, the business's performance. The effectiveness of QMS is commonly assessed using methods such as management reviews, customer feedback analysis and audits. Audits that are aligned with ISO standards play a critical role in evaluating management processes, measuring QMS performance and identifying opportunities for improvement. This study focuses on the importance of QMS audits in imp

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Soesanto, Edy, Fadila Kurniasih, Putri Mutiara, and Salsabila Taqwaning Afifi. "Sistem manajemen keamanan informasi dengan standar ISO/IEC 27001 dan ISO/ICE 27002 pada PT Jasa Marga." Co-Creation : Jurnal Ilmiah Ekonomi Manajemen Akuntansi dan Bisnis 1, no. 4 (2023): 155–64. http://dx.doi.org/10.55904/cocreation.v1i4.700.

Повний текст джерела

Анотація:

This study aims to analyze the security management system with ISO/IEC 27001 and 27002 standards at PT Jasa Marga. This study uses a literature search study method with an ISMS approach. Information security management system (ISMS) means a form of process organization based on a business risk approach for planning (Plan), implementation and operation (Execute), monitoring and inspection (Check), and maintenance and improvement or development (Act) of security gossip, ISO/IEC 27000, 27001 and 27002 companies are accepted and adapted using standards. Based on the results of the study, companies

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Petryk, Serhii, Ievgenii Andrieiev, Dmytro Tishko, Anton Kurbanov, and Vitaliy Yunger. "The effectiveness of quality management strategies in health care organizations: an analysis of quality standards implementation and clinical performance improvement." Revista Amazonia Investiga 12, no. 68 (2023): 333–45. http://dx.doi.org/10.34069/ai/2023.68.08.31.

Повний текст джерела

Анотація:

Quality management strategies in healthcare institutions require an increasingly refined quality management system. This study aims to analyze the ISO 9001:2015 Standard for the implementation of a quality management system in the field of medical services provided by healthcare facilities, as well as to determine patterns during performance to assess the effectiveness of the quality management strategy. The article discusses key factors for achieving the quality management strategy through the implementation of a quality management system to improve clinical indicators. This system, according

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Nurdin, Nurdin, and Wiwiet Prihatmadji. "KESESUAIAN DOKUMENTASI DI LP3I COLLEGE JAKARTA DENGAN STANDARD SISTEM MANAJEMEN MUTU ISO 9001:2008." JURNAL LENTERA BISNIS 6, no. 1 (2017): 131. http://dx.doi.org/10.34127/jrlab.v6i1.172.

Повний текст джерела

Анотація:

<p><em>The main steps in order to obtain international certification of ISO 9001 Quality Management System is to prepare the mentality and habits of employees, that is to prepare quality culture as a culture of employees. The next step is the technical preparation, preparing of documents and records, preparations for work process control systems, preparing the performance monitoring and evaluation system, which is summarized in the documentation system of LP3I College. Challenges to the process of implementation of ISO 9001 is overcome by socialization the culture of quality as a w

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Putra, Muhammad Fidindri, Habibi Santoso, and Ridwan Usman. "PENERAPAN SISTEM MANAJEMEN MUTU ISO 9001:2015 UNTUK MENINGKATKAN KUALITAS DAN DAYA SAING PERUSAHAAN X." JURNAL PEKAMAS 3, no. 1 (2023): 43–49. http://dx.doi.org/10.46961/jpk.v3i1.788.

Повний текст джерела

Анотація:

AbstrakPenerapan standar manajemen mutu ISO 9001-2015 pada perusahaan dapat menjadi antisipasi dari tidak standarnya produk yang dihasilkan yang menjadikan perusahaan sulit bersaing dengan perusahaan sejenis dan kurangnya kepercayaan konsumen terhadap produk yang di hasilkan. standar manajemen mutu ISO 9001-2015 adalah unsur memegang peranan penting dalam peningkatan kualitas, produktifitas dan kesehatan tenaga kerja. ISO 9001:2015 adalah keluarga dari sistem standar manajemen mutu yang dirancang untuk membantu organisasi dalam memastikan bahwa organisasi dapat memenuhi kebutuhan pelanggan dan

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Hhumennyi, D. O., A. M. Shevchenko, and Yu I. Khlaponin. "USING THE ISO 21434 CRITERIA FOR GENERATING SYSTEM SPECIFICATIONS IN A-SPICE PROCESSES FOR CARS." Collection of scientific works of the Military Institute of Kyiv National Taras Shevchenko University, no. 79 (2023): 94–102. http://dx.doi.org/10.17721/2519-481x/2023/79-09.

Повний текст джерела

Анотація:

With the increasing presence of electronics and autonomous systems in modern automobiles, cybersecurity has become a critical concern. Automotive manufacturers and other stakeholders are actively seeking ways to ensure reliable protection against cyber attacks. One approach involves the utilization of ISO 21434, a standard designed to enhance cybersecurity in the automotive industry. This research article investigates the ISO 21434 standard and its application in the field of automotive production, specifically in software development under the A-SPICE standard. The publication describes the m

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Putri, Radea Kartika, Wiyono Sutari, and Heriyono Lalu. "PERANCANGAN PROSEDUR PELATIHAN PEGAWAI SESUAI REQUIREMENT ISO 9001:2015 KLAUSUL 7.2 DENGAN RISK BASED THINKING MENGGUNAKAN METODE BUSINESS PROCESS IMPROVEMENT (STUDI KASUS: UNIVERSITAS XYZ)." JISI: Jurnal Integrasi Sistem Industri 5, no. 1 (2018): 21–30. https://doi.org/10.24853/jisi.5.1.21-30.

Повний текст джерела

Анотація:

Dengan adanya penyempurnaan versi terbaru ISO 9001 yaitu ISO 9001:2008 menjadi ISO 9001:2015, mengharuskan setiap organisasi memperbaharui dokumen mutunya. Salah satu bentuk dokumen mutu yang diterapkan oleh salah satu organisasi di bidang pendidikan yaitu Standard Operating Procedure (SOP). Beberapa perubahan yang juga terjadi di organisasi tersebut menyebabkan fungsi bisnis di dalamnya juga mengalami perubahan, salah satunya pada proses pelatihan untuk pegawai tenaga penunjang akademik (TPA). Proses pelatihan telah didokumentasikan dalam bentuk SOP berdasarkan ISO 9001:2008 serta perlunya di

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Berzisa, Solvita. "Application of Project Management Information Systems in Efficiency Improvement of Quality Management System." Environment. Technology. Resources. Proceedings of the International Scientific and Practical Conference 3 (June 16, 2015): 17. http://dx.doi.org/10.17770/etr2015vol3.173.

Повний текст джерела

Анотація:

Project management information systems (PMIS) and quality management system (QMS) are two components in the project oriented organization that helps to achieve required quality of the project product. QMS define quality framework and PMIS helps to ensure quality framework requirement related to the projects. The objective of paper is to evaluate and demonstrate PMIS options for efficiency QMS development and maintenance. QMS requirements are identified according to ISO 9001:2008 standard and PMIS options of efficiency improvement are evaluated according to ISO 9004:2009 self-assessment tool.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Ceko, Enriko. "A new approach to evaluate the index of ISO 9001." SocioEconomic Challenges 6, no. 3 (2022): 5–22. http://dx.doi.org/10.21272/sec.6(3).5-22.2022.

Повний текст джерела

Анотація:

The purpose of this study was to offer a new approach to evaluate the index of ISO 9001 standard, as so far countries are listed for the ISO 9001 standard based only on the number of ISO 9001 certificates issued for each country, and this perception does not correspond to reality, because some countries that are listed per alphabetic order on top, doesn’t enjoy the property of having a better ranking when it comes to rank countries per number of ISO 9001 certificates issues, or when it comes to rank countries about their weight on the issue. On the other side, listing countries simply by the n

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Dziuba, Hryhorii. "The definition of the quality management system and methodology of quality evaluation in public government bodies." Galic'kij ekonomičnij visnik 84, no. 5 (2023): 162–70. http://dx.doi.org/10.33108/galicianvisnyk_tntu2023.05.162.

Повний текст джерела

Анотація:

The article is devoted to the analysis of the definition of the quality management system (QMS) according to various sources, including the national quality standard DSTU ISO 9001:2015, the views of domestic and foreign scientists. Approaches to the definition of QMS are considered in the context of its role as a strategic decision of the organization to improve overall effectiveness and sustainable development. The authors of the article take into account the definition of Tuomi V., who sees QMS as a process management system with a focus on customer satisfaction while minimizing the cost to

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Başaran, Burhan. "The past, present and future ISO 9001 quality management system standard." Business & Management Studies: An International Journal 9, no. 1 (2021): 227–47. http://dx.doi.org/10.15295/bmij.v9i1.1756.

Повний текст джерела

Анотація:

The number of studies for the future improvement of the standard ISO 9001, which is the most used standard in many areas, is limited. Within this research scope, the number of ISO 9001 certificates registered between 1993 and 2019 in some G20 countries was evaluated, and the number of certificates for 2020-2026 was estimated using the Eviews 11 program. Time series regression and exponential smoothing methods are used in estimation calculation. According to the number of certificates estimated for 2026, country rankings were determined as India (43,947), Brazil (22,744), Canada (11,814), USA (

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Guirette-Barbosa, Omar Alejandro, Selene Castañeda-Burciaga, Martha Angélica Ramírez-Salazar, et al. "Transforming Quality into Results: A Multivariate Analysis with Hotelling’s T2 on the Impact of ISO 9001." Systems 13, no. 4 (2025): 226. https://doi.org/10.3390/systems13040226.

Повний текст джерела

Анотація:

This research explores the effectiveness of Quality Management Systems (QMSs) certified under the ISO 9001 standard by applying Hotelling’s multivariate statistical test T2. This research focuses on organizations in central Mexico, evaluating whether the adoption of the ISO 9001 standard generates the promised benefits (by the International Standardization Organization itself), such as process improvement, increased customer satisfaction, higher sales, and increased revenues. Using a comprehensive framework grounded in ISO 10014 and incorporating statistical tools, such as descriptive analysis

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Brajer-Marczak, Renata, and Alicja Gębczyńska. "Benefits and limitations of implementing the ISO 9004:2018 standard." Scientific Papers of Silesian University of Technology. Organization and Management Series 2024, no. 194 (2024): 35–48. http://dx.doi.org/10.29119/1641-3466.2024.194.2.

Повний текст джерела

Анотація:

Purpose: The paper's main objective is to indicate the current state of knowledge regarding the results of implementing the ISO 9004:2018 standard, with a particular focus on identifying the potential benefits and limitations of its implementation. The study is in line with the research stream on improving quality management systems and striving for sustainable market success. Design/methodology/approach: The paper is based on a narrative literature review through analysis of the publications available in scientific databases. It was then combined with the method of scientific reflection. Find

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Fanti, Giulio, R. Basso, and V. Montauti. "Damping Measurement of Bending Vibration in Alpine Skis: An Improvement of Standard ISO 6267." Applied Mechanics and Materials 5-6 (October 2006): 199–206. http://dx.doi.org/10.4028/www.scientific.net/amm.5-6.199.

Повний текст джерела

Анотація:

The ISO 6267 standard defines a damping measuring method in terms of the half-time of the vibration of clamped alpine skis that is mainly related to the first vibration mode only. By means of the experimental test done in laboratory, it is shown that this method is not able to completely characterize the damping of the skis that depends on the vibration mode considered. For example in the case a ski sample, damping ratio varies from 0.45%±0.05% of the first mode to 2.1%±0.1% of the fourth one. The experimental test done on ski tracks by means of piezo-accelerometers placed on the skis running

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Trichkova, Elisaveta. "ISO 9126 Based Quality Assessment Approach for e-Learning System." Information Technologies and Control 12, no. 1 (2014): 21–29. http://dx.doi.org/10.1515/itc-2015-0008.

Повний текст джерела

Анотація:

Abstract The aim of this paper is improving the information processes in a software system based on the solutions of optimization problems satisfying the requirements of the established world standard for quality assessment. Potential for improvement is based on real e-learning system in the field of medicine. Quantitative evaluation of system parameters and processes by using quality assessment approach based on ISO 9126 standard is illustrated. Results of solution of two optimization problems about quality standard criteria and their comparison is presented. Obtained solutions are given grap

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Górny, Adam. "Application of technical measures to improve the work safety - systemic guidelines." MATEC Web of Conferences 343 (2021): 10006. http://dx.doi.org/10.1051/matecconf/202134310006.

Повний текст джерела

Анотація:

In order to improve working conditions in conformity with the ISO 45001 standard, organizations need to address a wide range of issues that are essential for compliance with system requirements. One of them is to limit technical measures to those that are necessary for task completion and have been designed to mitigate threats and strains. To avert potential hazards, it is imperative to deploy improvement measures that are adequate for the nature of non-conformities and will either eliminate or reduce the underlying causes of irregularities. By employing solutions in keeping with the ISO 45001

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!