Увійти

Готові списки джерел за темами / Laser device / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Laser device.

Статті в журналах з теми "Laser device"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Laser device".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Butkutė, Agnė, Tomas Jurkšas, Tomas Baravykas, et al. "Combined Femtosecond Laser Glass Microprocessing for Liver-on-Chip Device Fabrication." Materials 16, no. 6 (2023): 2174. http://dx.doi.org/10.3390/ma16062174.

Повний текст джерела

Анотація:

Nowadays, lab-on-chip (LOC) devices are attracting more and more attention since they show vast prospects for various biomedical applications. Usually, an LOC is a small device that serves a single laboratory function. LOCs show massive potential for organ-on-chip (OOC) device manufacturing since they could allow for research on the avoidance of various diseases or the avoidance of drug testing on animals or humans. However, this technology is still under development. The dominant technique for the fabrication of such devices is molding, which is very attractive and efficient for mass producti

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Wu, Jianmin, Shijuan Huang, Xiquan Wang, Yunli Kou, and Wen Yang. "Study on the Performance of Laser Device for Attacking Miniature UAVs." Optics 5, no. 4 (2024): 378–91. http://dx.doi.org/10.3390/opt5040028.

Повний текст джерела

Анотація:

In order to test the performance of laser devices for attacking miniature UAVs, we studied the principle of laser devices on soft killing and hard killing. Then, the flight test conditions of miniature UAVs were constructed, and the laser devices were tested and evaluated with the two indexes of maximum jamming range and maximum intercepting range. The first step involves calculating the far-field beam power density corresponding to the unmanned aerial vehicle (UAV) detection equipment and laser device at different distances. Subsequently, the signal electron count received by the UAV detector

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kaub, Leon, and Christoph Schmitz. "Spread of the Optical Power Emission of Three Units Each of Two Different Laser Therapy Devices Used in Sports Medicine, Which Cannot Be Assessed by the Users, Shown by Means of High-Fidelity Laser Measurement Technology." Biomedicines 11, no. 2 (2023): 585. http://dx.doi.org/10.3390/biomedicines11020585.

Повний текст джерела

Анотація:

Laser therapy devices (LTDs) operating with near-infrared laser light are increasingly being used in sports medicine. For several reasons, users cannot evaluate whether or not such devices emit laser beams according to the specifications provided by the manufacturer and the settings of the device. In this study, the laser beams from two different LTDs that can be used in sports medicine were thoroughly characterized by measuring the emitted power, pulse shapes and lengths and spatial intensity distributions using professional, high-fidelity laser measurement technology. This was repeated for t

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Nistoroschi, Giorgiana, and Gheorghe Bosoancă. "Workpiece Clamping at Laser Beam Machining." Applied Mechanics and Materials 371 (August 2013): 295–99. http://dx.doi.org/10.4028/www.scientific.net/amm.371.295.

Повний текст джерела

Анотація:

The laser beam could be obtained by means of a laser diode. The amplification process develops inside the optical fiber. In the laboratory for nonconventional technologies from the Gheorghe Asachi Technical University of Iași, there is an ytterbium fiber laser equipment able to ensure conditions for obtaining a laser spot having a diameter of 30 μm diameter and a wavelength of 1070 nm. This paper purpose is to highlight the solutions that we may consider for a workpiece clamping device. On the bases of the general known information concerning the devices used in order to machine workpieces on

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Wan Muhamad Hatta, Sharifah Fatmadiana, Dayanasari Abdul Hadi, and Norhayati Soin. "Laser Anneal-Induced Effects on the NBTI Degradation of Advanced-Process 45nm High-K PMOS." Advanced Materials Research 189-193 (February 2011): 1862–66. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.1862.

Повний текст джерела

Анотація:

This paper presents the effects imposed on the reliability of advanced-process CMOS devices, specifically the NBTI degradation, subsequent to the integration of laser annealing (LA) in the process flow of a 45nm HfO2/TiN gate stack PMOS device. The laser annealing temperatures were varied from 900°C to 1350°C. The effects imposed on the NBTI degradation of the device were comprehensively analyzed in which the shifts of the threshold voltage and drain current degradation were observed. The analysis was extended to the effects of the conventional RTA as opposed to the advanced laser annealing pr

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Choy, Daniel S. J. "Fiberoptic Laser Tunneling Device." Laser Medicine and Surgery News and Advances 7, no. 6 (1989): 39–42. http://dx.doi.org/10.1089/lms.1989.7.6.39.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Wang, Bin, Langning Wang, Xinyue Niu, et al. "Breakdown behavior of SiC photoconductive switch with transparent electrode." AIP Advances 12, no. 8 (2022): 085210. http://dx.doi.org/10.1063/5.0101435.

Повний текст джерела

Анотація:

The breakdown behavior of a V-doped 4H silicon carbide photoconductive switch with a transparent electrode under a high electric field is studied. The device is triggered by a laser pulse below the bandgap wavelength with a repetition rate of 100 Hz. The light peak-power of the laser pulse reaches hundreds of kW, and the bias voltage is increased from 10 to 20 kV. With the accumulation of the number of pulses, the device shows breakdown behavior. Through the microscopic diagnosis of damaged and breakdown devices, according to the analysis of theoretical and simulation results, the breakdown of

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Cui, Yixin, Yingqi Ma, Shipeng Shangguan, and Jianwei Han. "Study of Single Event Burnout Mechanism in GaN Power Devices Using Femtosecond Pulsed Laser." Photonics 9, no. 4 (2022): 270. http://dx.doi.org/10.3390/photonics9040270.

Повний текст джерела

Анотація:

Single event burnout (SEB) is a great threat to gallium nitride (GaN) power devices for aerospace applications. This paper is dedicated to the investigation of the SEB mechanism in a GaN power device using a femtosecond pulsed laser. In the test, the SEB of a commercial p-GaN power device was triggered by a focused laser beam with a wavelength of 620 nm, and the irradiation-sensitive area of the devices was identified. We observed that the damage modes were consistent with the results of heavy ion experiments. The vertical breakdown of the drain is proposed as the dominant mechanism of SEB. We

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Matei, Andrei Teodor, Anita Ioana Visan, and Irina Negut. "Laser-Fabricated Micro/Nanostructures: Mechanisms, Fabrication Techniques, and Applications." Micromachines 16, no. 5 (2025): 573. https://doi.org/10.3390/mi16050573.

Повний текст джерела

Анотація:

The rapid evolution of optoelectronic devices necessitates innovative fabrication techniques to improve their performance and functionality. This review explores the advancements in laser processing as a versatile method for creating micro- and nanostructured surfaces, tailored to enhance the efficiency of optoelectronic applications. We begin by elucidating the fundamental mechanisms underlying laser interactions with materials, which facilitate the precise engineering of surface topographies. Following this, we systematically review various micro/nanostructures fabricated by laser techniques

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Jasim, Luma Khalid. "Accuracy Assessment of Stonex X-300 Laser Scanner Cameras." Journal of Engineering 24, no. 11 (2018): 101. http://dx.doi.org/10.31026/j.eng.2018.11.08.

Повний текст джерела

Анотація:

Assessment the actual accuracy of laboratory devices prior to first use is very important to know the capabilities of such devices and employ them in multiple domains. As the manual of the device provides information and values in laboratory conditions for the accuracy of these devices, thus the actual evaluation process is necessary. In this paper, the accuracy of laser scanner (stonex X-300) cameras were evaluated, so that those cameras attached to the device and lead supporting role in it. This is particularly because the device manual did not contain sufficient information about thos

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Cuando-Espitia, Natanael, Juan Bernal-Martínez, Miguel Torres-Cisneros, and Daniel May-Arrioja. "Laser-Induced Deposition of Carbon Nanotubes in Fiber Optic Tips of MMI Devices." Sensors 19, no. 20 (2019): 4512. http://dx.doi.org/10.3390/s19204512.

Повний текст джерела

Анотація:

The integration of carbon nanotubes (CNTs) into optical fibers allows the application of their unique properties in robust and versatile devices. Here, we present a laser-induced technique to obtain the deposition of CNTs onto the fiber optics tips of multimode interference (MMI) devices. An MMI device is constructed by splicing a section of no-core fiber (NCF) to a single-mode fiber (SMF). The tip of the MMI device is immersed into a liquid solution of CNTs and laser light is launched into the MMI device. CNTs solutions using water and methanol as solvents were tested. In addition, the use of

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Singh, Risham, Gurpreet Singh, and Peteris Grabusts. "LASER AS A VISUALIZATION DEVICE." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 22 (April 25, 2018): 156–60. http://dx.doi.org/10.17770/het2018.22.3618.

Повний текст джерела

Анотація:

As known to the prior characteristics of the laser, the new advanced technologies are based on the lasers. It can be used in different ways like scanning, displaying, engraving, cutting, drilling, marking, and many more. In this article, a discussion is made about the use of lasers as a device of visualization in climatic conditions like snow, fog and heavy rain. The existing technology “LiDAR” is one of the systems that will be discussed. LiDAR is a Light Detection and Ranging device used for driving the autonomous vehicles and are also installed on aircrafts in order to scan a vast area like

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Almarzouq, Ahmad, and Sero Andonian. "Spotlight — Management of pyelovesical bypass device stones." Canadian Urological Association Journal 12, no. 5 (2018): E267–8. http://dx.doi.org/10.5489/cuaj.4857.

Повний текст джерела

Анотація:

Pyelovesical bypass devices or artificial ureters have been described as a last resort in patients with long ureteral strictures that fail traditional endoscopic and open repair. Herein, we describe a 52-year-old female who had a Detour (Coloplast, Humlebaek, Denmark) pyelovesical bypass device inserted after an iatrogenic ischemic injury to the distal two-thirds of the left ureter during pelvic surgery for recurrent endometrial stromal sarcoma. Six months after placement of the device, she presented with gross hematuria and recurrent urinary tract infections (UTIs) and was found to have encru

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kim, Jihoon, Sungwook Choi, Seul-Lee Lee, Jinsil Han, and Yong Wook Lee. "Dimension Effect of Sapphire Substrate in Current-Switching Device Based on Vanadium Dioxide Thin Film Controlled by Photothermal Effect." Journal of Nanoscience and Nanotechnology 21, no. 8 (2021): 4285–92. http://dx.doi.org/10.1166/jnn.2021.19402.

Повний текст джерела

Анотація:

The switching characteristics of a vanadium dioxide (VO2) thin-film device, in which the current flowing through the device can be switched through the photothermal effect using focused laser pulses, were investigated according to the dimensions of the sapphire substrate on which the VO2 thin film was deposited through simulation using COMSOL Multiphysics. The physical properties of the VO2 device, modeled for the simulation, were determined according to the structural and electrical properties and photothermally controlled current-switching characteristics of fabricated VO2 devices. For a var

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Min, Yong Zhi, Jian Wu Dang, and Zhen Hai Zhang. "Online Surface Settlement Monitoring System of Ballastless Track with Difference Image Style." Applied Mechanics and Materials 367 (August 2013): 259–63. http://dx.doi.org/10.4028/www.scientific.net/amm.367.259.

Повний текст джерела

Анотація:

In order to achieve the online surface settlement monitoring of ballastless track,an online surface settlement monitoring system with difference image type has been established, of which the components, the preprocessing measures of images, the precise positioning methods of laser spot have also been researched. The device mainly contains a dot laser and a point-position measurement device that uses a CCD to detect the position change of the laser spot image. Any position change of the dot laser can be measured and the settlement for one point can be obtained remotely. The multi-point settleme

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Tarasov, Aleksandr, and Hong Chu. "Engineering of Ti:Sapphire Lasers for Dermatology and Aesthetic Medicine." Applied Sciences 11, no. 22 (2021): 10539. http://dx.doi.org/10.3390/app112210539.

Повний текст джерела

Анотація:

This review describes new engineering solutions for Ti:Sapphire lasers obtained at Laseroptek during the development of laser devices for dermatology and aesthetic medicine. The first device, PALLAS, produces 311 nm radiation by the third harmonic generation of a Ti:Sapphire laser, which possesses similar characteristics to excimer laser-based medical devices for skin treatments. In comparison to excimer lasers, Ti:Sapphire laser services are less expensive, which can save ~10% per year for customers compared to initial excimer laser costs. Here, the required characteristics were obtained due

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Liu, Pengcheng, Yingqi Ma, and Jianwei Han. "Preliminary Study on Detecting the Internal Voltage Values of Integrated Circuits Based on Electro-Optical Frequency Mapping." Applied Sciences 12, no. 3 (2022): 1188. http://dx.doi.org/10.3390/app12031188.

Повний текст джерела

Анотація:

Electro-optical frequency mapping (EOFM) technology can detect node signals from the backside of integrated circuits (ICs). In the past, the detected signal only qualitatively represented the electrical activity strength inside the device. In this paper, the electro-optical signal generation mechanism of the device is systematically studied, and a concise physical model of laser beam modulation based on the optical transmission matrix is proposed. Firstly, the influence of the bandwidth of the laser and each structure covered by the laser spot on the electro-optical signal of the device is wel

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Kim, Eun Seo, Mincheol Cho, Inseong Choi, and Sung-Wook Choi. "Fabrication of Perfluoropolyether Microfluidic Devices Using Laser Engraving for Uniform Droplet Production." Micromachines 15, no. 5 (2024): 599. http://dx.doi.org/10.3390/mi15050599.

Повний текст джерела

Анотація:

A perfluoropolyether (PFPE)-based microfluidic device with cross-junction microchannels was fabricated with the purpose of producing uniform droplets. The microchannels were developed using CO2 laser engraving. PFPE was chosen as the main material because of its excellent solvent resistance. Polyethylene glycol diacrylate (PEGDA) was mixed with PFPE to improve the hydrophilic properties of the inner surface of the microchannels. The microchannels of the polydimethylsiloxane microfluidic device had a blackened and rough surface after laser engraving. By contrast, the inner surface of the microc

Стилі APA, Harvard, Vancouver, ISO та ін.

19

MINEHARA, Eisuke. "A New Laser Decontamination Device." Review of Laser Engineering 40, no. 3 (2012): 165. http://dx.doi.org/10.2184/lsj.40.3_165.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Ye, Yan-Ming, Cheng-Zai Lu, Yu-Fen Li, and Kang-Sun Wang. "New laser device for ophthalmology." Applied Optics 24, no. 5 (1985): 697. http://dx.doi.org/10.1364/ao.24.000697.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Beverini, N., E. Maccioni, M. Morganti, F. Stefani, R. Falciai, and C. Trono. "Fiber laser strain sensor device." Journal of Optics A: Pure and Applied Optics 9, no. 10 (2007): 958–62. http://dx.doi.org/10.1088/1464-4258/9/10/029.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Um, Seung-Hoon, Suk-Won Hwang, Costas P. Grigoropoulos, Hojeong Jeon, and Seung Hwan Ko. "Recent advances in selective laser–material interaction for biomedical device applications." Applied Physics Reviews 9, no. 4 (2022): 041302. http://dx.doi.org/10.1063/5.0101634.

Повний текст джерела

Анотація:

Lasers that exhibit monochromaticity, directionality, coherence, and focusability have been used in health care and defense industries for over five decades. Recently, the application of lasers in medical and biomedical devices has increased significantly. Considering biomedical devices and materials are attached to the skin or implanted into the body, the immune response, inflammation control, cell adhesion, migration, and biocompatibility of the device must be investigated. Therefore, researchers are actively studying laser processing technology to control these problems. In this study, we p

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Hendricks, Kelly, Celenkosini Thembelenkosini Nxumalo, Mokgadi U. Makgobole, Shanaz Ghuman, Diana Jacobs, and Nomakhosi Mpofana. "Evaluating the effectiveness of laser hair reduction using a home use laser in comparison to a Diode laser." PLOS ONE 18, no. 5 (2023): e0286162. http://dx.doi.org/10.1371/journal.pone.0286162.

Повний текст джерела

Анотація:

Background Lasers of different wavelengths have been developed for use in permanent hair reduction. An increase in the manufacturing of home-use laser hair removal devices allows for these treatments to be performed in the comfort of your own home at an affordable cost. Objective To evaluate the effectiveness of permanent hair reduction using a Diode laser in comparison to the Silk’n™ Flash and Go Lux (475–1200 nm) home-use laser. Methods Fifteen females received six axillae laser hair removal treatments at two to four-week intervals using either a professional laser or home-use laser device.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Huber, Dominik, Michael Schneider, Paul Fulmek, Georg Pfusterschmied, and Ulrich Schmid. "Tailored measurement setup for the contactless characterization of MEMS resonators at the wafer level." Journal of Sensors and Sensor Systems 14, no. 1 (2025): 89–98. https://doi.org/10.5194/jsss-14-89-2025.

Повний текст джерела

Анотація:

Abstract. Statistical analysis of microelectromechanical system (MEMS) resonator devices in an early stage of device fabrication is challenging since actuation and sensing of the frequency-dependent response characteristics are often impossible before electrical connections are established. Photo-thermal actuation and optical readout using laser Doppler vibrometry (LDV) are powerful techniques to overcome this problem, enabling a fast, contactless device characterization and thus generating a high amount of data for statistical analysis. This paper reports on a tailored measurement setup for t

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Takeuchi, Kai, and Eiji Higurashi. "Wafer Bonding of GaAs and SiC via Thin Au Film at Room Temperature." Micromachines 16, no. 4 (2025): 439. https://doi.org/10.3390/mi16040439.

Повний текст джерела

Анотація:

Effective thermal management is a critical challenge in achieving high-power output for semiconductor laser devices. A key factor in laser device packaging is the bonding between the laser device on a GaAs substrate and a heat spreader, typically composed of high thermal conductivity materials such as SiC. Conventional soldering methods introduce thick bonding layers with relatively low thermal conductivity, resulting in high thermal resistance at the interface. In this study, we demonstrate the room temperature bonding of GaAs and SiC via a 30 nm thick Au layer, eliminating the need for a the

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Krivopalov, A. A., P. A. Shamkina, M. Yu Korkmazov, A. I. Glushchenko, V. M. Zhurba, and V. Yu Chuchin. "450 nm diode laser in the treatment of upper respiratory tract diseases." Russian Medical Inquiry 8, no. 8 (2024): 484–92. http://dx.doi.org/10.32364/2587-6821-2024-8-8-7.

Повний текст джерела

Анотація:

The use of modern laser systems has contributed to the enhancement of the quality and immediate outcomes of surgical treatment for patients with chronic laryngeal diseases. The benefits of laser surgery, such as asepsis, bloodlessness, and rapid onset of clinical effects, are ensured by the device technical characteristics and the physical properties of the generated waves. In laryngological practice, laser radiation with a wavelength of 450±10 nm is actively employed, and its efficacy continues to be studied. We present our experience with the surgical treatment of 10 patients with various ph

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Wang Wei and Li Jiang. "LASER ASSEMBLY AND PACKAGING OF A MEMS DEVICE." EPH - International Journal of Science And Engineering 4, no. 1 (2018): 27–31. http://dx.doi.org/10.53555/eijse.v4i1.153.

Повний текст джерела

Анотація:

Integration of 3-D devices, IC or MEMS, often requires a handle wafer which is removed before final packaging of the devices. This process usually uses lapping, chemical etch or high temperature heating to de-bond the handle wafer. A new technique to release a Pyrex handle wafer using laser ablation is presented. Pulsed energy, from a 248nm excimer laser is delivered transparently through the Pyrex handle wafer. This causes delamination of the bonded silicon structures from the handle wafer. This technique offers fast throughput at chip and wafer levels and protects the fragile and delicate ac

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Yang, Xue Ling, and Xiao Jing Li. "Adjustment of the Resonant Cavity and Cooling System for Laser Machine." Advanced Materials Research 532-533 (June 2012): 301–5. http://dx.doi.org/10.4028/www.scientific.net/amr.532-533.301.

Повний текст джерела

Анотація:

Laser device is an important apparatus that have been widely applied in various fields. The paper classified the laser device according to the different of working material forms and discussed the main characteristics. Main constitute of laser device is working material and excitation source. Adjusting measures of the resonant cavity is quite important for laser device, the author detailed discussed the operation procedure. As to the maintenance of the cooling system, the author also discussed the manipulate steps.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Yalçın, Nursel, and Pelin Su Gençay. "Three-dimensional reconstruction of a shooting crime scene." Edelweiss Applied Science and Technology 8, no. 5 (2024): 549–67. http://dx.doi.org/10.55214/25768484.v8i5.1717.

Повний текст джерела

Анотація:

The crime scene is technically the place where an illegal act took place. The investigation first starts at the crime scene. Documentation of the crime scene is of great importance in order to make correct decisions in the investigation and prosecution stages, With the development of technology; the use of different devices and different technologies in crime scene investigation and crime scene documentation has created a new working area for many forensic scientists and law enforcement officers. Taking a general view of the crime scene without contamination, low margin of error in measurement

Стилі APA, Harvard, Vancouver, ISO та ін.

30

GÜRLEVİK, Uğur, Cumali DALOKAY, and Kayhan MUTLU. "OS4 Vitrectomy Device of Oertli." Güncel Retina Dergisi (Current Retina Journal) 8, no. 4 (2023): 325–28. http://dx.doi.org/10.37783/crj-0424.

Повний текст джерела

Анотація:

Vitrectomy operations, which started with the construction of the first prototypes of vitrectomy devices in the early 1970s, have become increasingly widespread in parallel with technological developments until today. With the developments in pump systems, lighting systems and laser systems, patient safety and surgeon comfort are increasing. There are many companies producing vitrectomy devices in the market. Each device has some features that are superior to the other. The current vitrectomy device of Oertli, which has been working in this field since the prototype of the first vitrectomy dev

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Chu, S. N. G. "Long Wavelength Laser Diode Reliability and Lattice Imperfections." MRS Bulletin 18, no. 12 (1993): 43–48. http://dx.doi.org/10.1557/s0883769400039075.

Повний текст джерела

Анотація:

Reliable long wavelength laser diodes emitting in the 1.30−1.55 μm regime with an expected operating life greater than 25 years for optical fiber communication applications are now fabricated using a combined heavy screening and accelerated aging process. For a given laser structure, the reliability of the devices depends intricately on both the crystalline perfection of the complex buried-heteroepitaxial semiconductor structures as well as the qualities of structures external to the semiconductor, such as electrical contact, dielectric coating, bonding, and packaging structures external to th

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Allameh, Farzad, Mohammadreza Razzaghi, Morteza Fallah-Karkan, et al. "Comparison of Stone Retrieval Basket, Stone Cone and Holmium Laser: Which One Is Better in Retropulsion and Stone-Free Status for Patients with Upper Ureteral Calculi?" Journal of Lasers in Medical Sciences 10, no. 3 (2019): 179–84. http://dx.doi.org/10.15171/jlms.2019.28.

Повний текст джерела

Анотація:

Introduction: Transurethral lithotripsy (TUL) is an appropriate treatment for ureteral stones and is usually used for stones in the middle and lower part of the ureter. Different devices such as the Holmium laser, the stone basket, and the stone cone exist to prevent any fragments from retropulsion during TUL. The present study aims to compare the advantages and disadvantages of the Holmium laser, the stone basket, and the stone cone. Methods: A retrospective study was conducted from September 2016 to January 2018 comparing various TUL methods in 88 subjects with proximal ureteral calculi. The

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Sfasciotti, Gian Luca, Francesca Zara, Iole Vozza, Veronica Carocci, Gaetano Ierardo, and Antonella Polimeni. "Diode versus CO2 Laser Therapy in the Treatment of High Labial Frenulum Attachment: A Pilot Randomized, Double-Blinded Clinical Trial." International Journal of Environmental Research and Public Health 17, no. 21 (2020): 7708. http://dx.doi.org/10.3390/ijerph17217708.

Повний текст джерела

Анотація:

Background: The labial frenula are triangular plicas departing from the alveolar mucosa and attaching themselves at different heights of the gingiva. Sometimes a high attachment can determine a gingival recession. The most suitable surgical resolution is the use of laser devices. The aim of this study was to compare the labial frenulectomy through the use of Diode and CO2 laser techniques in pediatric patients with a high labial frenulum attachment, clarifying at the same time the preventive role of the surgical treatment to avoid further recession. Methods: A pilot randomized, double-blinded

Стилі APA, Harvard, Vancouver, ISO та ін.

34

OTSUJI, TAIICHI, TAKUYA NISHIMURA, YUKI TSUDA, YAHYA MOUBARAK MEZIANI, TETSUYA SUEMITSU, and EIICHI SANO. "EMISSION AND INTENSITY MODULATION OF TERAHERTZ ELECTROMAGNETIC RADIATION UTILIZING 2-DIMENSIONAL PLASMONS IN DUAL-GRATING-GATE HEMT'S." International Journal of High Speed Electronics and Systems 19, no. 01 (2009): 33–53. http://dx.doi.org/10.1142/s0129156409006072.

Повний текст джерела

Анотація:

Two dimensional plasmons in submicron transistors have attracted much attention due to their nature of promoting emission/detection of electromagnetic radiation in the terahertz range. We have recently proposed and fabricated a highly efficient, broadband plasmon-resonant terahertz emitter. The device incorporates doubly interdigitated grating gates and a vertical cavity into a high electron mobility transistor. The device operates in various modes: (1) DC-current-driven self oscillation, (2) CW-laser excited terahertz emission, (3) two-photon injection-locked difference-frequency terahertz em

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Luo, Xinhan, Yujia Cui, Xiwen Yang, Guangfa Hu, and Zhili Wu. "Design and Experiment of a Laser Scoring Device for Camellia oleifera Fruits." Agriculture 15, no. 9 (2025): 987. https://doi.org/10.3390/agriculture15090987.

Повний текст джерела

Анотація:

To address the low shelling rate and high seed breakage in existing oil tea fruit shelling devices, a novel laser scoring device was designed for fresh Camellia oleifera fruits. Experimental studies were conducted to optimize the key parameters of the custom-built laser scoring machine, aiming to improve scoring qualification rates. Through single-factor tests and response surface methodology, a regression model was developed to characterize the relationship between the scoring qualification rate and the following three variables: conveyor speed (12 mm/s), laser power (97 W), and defocusing di

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Sekizaki, Hiromi, and Tomoyuki Shima. "Overview of Endovenous Diode Laser Ablation Device, ELVeS Laser." Nippon Laser Igakkaishi 33, no. 1 (2012): 52–56. http://dx.doi.org/10.2530/jslsm.33.52.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Liu, Yan Wu. "Research on 10.6μm Laser Disturbance to Infrared Detector System". Applied Mechanics and Materials 155-156 (лютий 2012): 810–14. http://dx.doi.org/10.4028/www.scientific.net/amm.155-156.810.

Повний текст джерела

Анотація:

In order to research laser weapon soft damage to infrared missile, 10.6μm laser disturbance to infrared detector system was researched. First, 10.6μm laser atmospheric propagation transmittance was deduced. Laser atmospheric propagation transmittance relation curve was obtained. The relation curve is changed by atmospheric visibility and laser propagation distance. Then the experiment about on-axis laser disturbance to charge coupled device imaging detectors system was conducted. Charge coupled device saturation power density was measured. The relation curve between charge coupled device satur

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Kim, Sungil, Jeongtae Kim, Yeun-Ho Joung, Jiyeon Choi, and Chiwan Koo. "Bonding Strength of a Glass Microfluidic Device Fabricated by Femtosecond Laser Micromachining and Direct Welding." Micromachines 9, no. 12 (2018): 639. http://dx.doi.org/10.3390/mi9120639.

Повний текст джерела

Анотація:

We present a rapid and highly reliable glass (fused silica) microfluidic device fabrication process using various laser processes, including maskless microchannel formation and packaging. Femtosecond laser assisted selective etching was adopted to pattern microfluidic channels on a glass substrate and direct welding was applied for local melting of the glass interface in the vicinity of the microchannels. To pattern channels, a pulse energy of 10 μJ was used with a scanning speed of 100 mm/s at a pulse repetition rate of 500 kHz. After 20–30 min of etching in hydrofluoric acid (HF), the glass

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Wetzig, K., J. Edelmann, W. Fischer, and H. Mueller. "LASEM - a novel combined device for laser modification in SEM." Scanning 9, no. 3 (1987): 99–107. http://dx.doi.org/10.1002/sca.4950090303.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Fleming, David, Jong-Uk Kim, Janet Okada, et al. "Thin Wafer Handling Using Mechanical- or Laser-Debondable Temporary Adhesives." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2015, DPC (2015): 000419–41. http://dx.doi.org/10.4071/2015dpc-tp12.

Повний текст джерела

Анотація:

The development of adhesives that enable handling, processing, and assembly of thin wafers and die is a key technical challenge for the realization of 3D devices. We will present on temporary adhesive technology for processing of thinned wafers that is amenable to either mechanical or laser-assisted debonding that can occur at room temperature. Temporary wafer bonding has emerged as the method of choice for handling silicon wafers during the thinning and high-temperature backside processing required for the manufacture of 3D device structures. Among the requirements for temporary wafer bonding

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Zherebtsov, E. A., A. I. Zherebtsova, A. V. Dunaev, and K. V. Podmaster’ev. "Method and Device for Metrological Control of Laser Doppler Flowmetry Devices." Biomedical Engineering 48, no. 4 (2014): 191–95. http://dx.doi.org/10.1007/s10527-014-9450-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Lyandres, I. H., D. A. Lukashenko, P. N. Nazarenko, V. V. Taranov, L. N. Khokhlenkov, and A. P. Shkadarevich. "Laser apparatus "Pulsar" and its biophysical foundations applications." Electronics and Communications 15, no. 5 (2010): 164–69. http://dx.doi.org/10.20535/2312-1807.2010.58.5.285182.

Повний текст джерела

Анотація:

On the basis of the analysis of the studied mechanisms of interaction of laser radiation and a bio tissue the basic requirements to parameters of laser surgical devices are defined. It is created two-wave (1,064 and 1,32 microns) the laser surgical device of new generation the Pulsar, under the characteristics combining advantages as solid-state (high pulse capacity), and diode lasers (adjustment of duration of impulses). At the expense of optimization of a design of a radiator the efficiency of generation to 5 % is considerably raised and, as consequence, are considerably lowered weight and s

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Cao, Chunqiang, Jianwei Ma, Jianhua Chen, et al. "Design of laser pyrotechnic device for insensitive ammunition." Journal of Physics: Conference Series 2891, no. 5 (2024): 052027. https://doi.org/10.1088/1742-6596/2891/5/052027.

Повний текст джерела

Анотація:

Abstract In this paper, the design method of a laser pyrotechnics system for insensitive ammunition is introduced. The functional architecture, product structure and electromagnetic protection of the semiconductor laser included in the system are designed. At the same time, the principle, structure, function and advantages of the optical safety components of the magneto-optic switch are introduced in detail, and a blunt laser ignition tube is developed, the composition and charge of the explosive are described, and the slow roasting performance of the laser ignition tube is deeply studied. The

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Li, Zhe Kun, Hong Yun Li, Yu Sheng Zou, Ming Yi Wu, and Ge Yi Liu. "The Research and Exploration of Impurity Removal by Laser Sensor in Tobacco Production." Applied Mechanics and Materials 462-463 (November 2013): 21–24. http://dx.doi.org/10.4028/www.scientific.net/amm.462-463.21.

Повний текст джерела

Анотація:

This paper introduces the structure of the laser devices for tobacco impurity, the principle of separation and sorting performance. It mainly consists of a scanning device, a remote control system, finger grooves vibration slots, debris output vibration slots, a closed-loop cooling device, air clean unit and other components. The principle of separation is based on that 12 lasers scan material in 2000 times/second and then the impurity is changed its trajectory by compressed air blowing and falls to the reject slot, the remaining materials along the normal track go into acceptance slot. The so

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Puricelli, Edela, Carlos Eduardo Baraldi, Eubirajara B. Medeiros, Gustavo Lisboa Martins, and João Julio da Cunha Filho. "Regulador de distância para pesquisa de laser de Er:YAG sem contato." Revista da Faculdade de Odontologia de Porto Alegre 41, no. 1 (2021): 63–65. http://dx.doi.org/10.22456/2177-0018.110320.

Повний текст джерела

Анотація:

Aims: develop a distance regulator for the Er:YAG laser. Methods: a metallic device adaptable to the 2051 handpiece was developed. Interchangeable metallic pieces, with diferent lengths, are adaptable to the regulator's body. Results: this laser device allows standard distances for laser delivering, from 08 to 20 millimetres from target tissue. Conclusions: the use of this new device allows a standard evaluation of the Er:YAG laser effects in experimental surgery, when emitted from different distances of the target tissue.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Kuo, Hsin-Hui, and Shuo-Fu Hong. "Nanographene-Based Saturable Absorbers for Ultrafast Fiber Lasers." Journal of Nanomaterials 2014 (2014): 1–6. http://dx.doi.org/10.1155/2014/631928.

Повний текст джерела

Анотація:

The generation of femtosecond pulse laser in the erbium-doped fiber laser system is presented by integrating of the nanographene-based saturable absorbers (SAs). A simplified method of dispersed nanographene-based SAs side-polished fiber device with controllable polished length and depth was also developed. The dependence of geometry of a graphene-deposited side-polished fiber device on optical nonlinear characteristics and on the performance of the MLFL was screened. We found that the 10 mm polished length with 1.68 dB insertion loss had the highest modulation depth (MD) of 1.2%. A stable MLF

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Godse, Kiran, Gauri Godse, and Anant Patil. "Triple wavelength diode laser for hair removal: A perspective." Cosmoderma 1 (October 23, 2021): 57. http://dx.doi.org/10.25259/csdm_59_2021.

Повний текст джерела

Анотація:

Unwanted hair growth on certain body parts is a common aesthetic concern. Different options including shaving, waxing, and chemicals are used for hair removal. These options provide temporary results; hence, laser therapy has become a popular option for hair removal among people. Significant advancements have taken place in laser devices for improving the results of hair removal. One of the recent developments in this area is introduction of triple wavelength diode laser for hair removal. This technology combines the benefits of three wavelengths in a single device. The triple wavelength laser

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Han, Xu, Jiantao Zhou, Rui Li, et al. "Surface Modification and Crystal Quality Improvement of 4H-SiC Film via Laser Treatment: Comparison of Continuous Wave and Femtosecond Pulse Laser." Materials 18, no. 8 (2025): 1781. https://doi.org/10.3390/ma18081781.

Повний текст джерела

Анотація:

4H-SiC (silicon carbide), known as the third-generation semiconductor, has been widely used in high-power electronic devices. However, surface defects on wafers can seriously affect the key parameters and stability of silicon carbide devices. In this work, we pioneered a dual-laser comparative framework to systematically investigate the effects of continuous wave (CW) and femtosecond (FS) pulse laser micromachining on 4H-SiC epitaxial layers. CW laser restructuring optimized lattice integrity at sub-melting thresholds, while ultrafast FS pulse laser achieved submicron roughness control (from 8

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Yin, Xiangfei, Genyou Liu, and Shilong Cao. "Design of Laser Ranging Device Using the Improved Photodetector and Its Usage in Geosynchronous Earth Orbit Navigation Satellite Orbit Determination." Journal of Nanoelectronics and Optoelectronics 15, no. 12 (2020): 1508–17. http://dx.doi.org/10.1166/jno.2020.2900.

Повний текст джерела

Анотація:

The geosynchronous earth orbit (GEO) satellites have good coverage performance and are widely used in WAAS, BDS, CAPS and other regional augmentation and regional navigation systems. At the same time, the precise orbit determination and prediction of such satellites play a significant role in high-precision navigation and user real-time positioning. In order to obtain higher accuracy of orbit determination, the laser ranging device is improved by equipping with a silicon-substrate germanium MSM photodetector in this study. In addition, the surface plasmon resonance augmentation effect is furth

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Buckland, Molly, Jaclyn S. Smith, Dane Hill, and Steven R. Feldman. "A Review of Localized Office and Home Devices in the Treatment of Psoriasis." Journal of Psoriasis and Psoriatic Arthritis 2, no. 1 (2016): 22–30. http://dx.doi.org/10.1177/247553031600200104.

Повний текст джерела

Анотація:

Importance Targeted phototherapy for treatment of localized psoriasis has advantages over non-targeted phototherapy. It delivers high ultraviolet doses to only the diseased skin, sparing irradiation to normal skin. Objective This study aims to review the devices that are available for targeted treatment of psoriasis. Evidence Review A PubMed literature review was conducted to identify devices for localized psoriasis phototherapy. Device manufacturer websites were searched for specific information. Findings Eighty-four papers were identified that met the inclusion criteria. We identified and de

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!