Готові списки джерел за темами / Layer Production

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Layer Production"

Автор: Grafiati
Опубліковано: 3 червня 2025
Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Layer Production".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Layer Production"

1

Santo, Loredana, and Fabrizio Quadrini. "Mold Production by Selective Laser Sintering of Resin Coated Sands." International Journal of Surface Engineering and Interdisciplinary Materials Science 1, no. 2 (2013): 1–13. http://dx.doi.org/10.4018/ijseims.2013070101.

Повний текст джерела
Анотація:
Small sand molds for aluminum casting were produced by selective laser sintering (SLS) of pre-coated sands. A diode laser source with a rectangular laser beam spot was used to perform single and multi-layer processing tests. Subsequently, small sand molds were produced and tested in casting operations. Single layer processing was performed by changing laser power, scan rate and distance of the processed surface from the beam focus. In multiple layer processing, some process changes were made to achieve a perfect joining of adjacent layers. More changes were necessary for the mold production so
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Chen, Ya-jun, Zhi-yuan Xu, Dong-wen Ge, Xu Zhang, Bo-hua Huang, and Tao Wang. "Research and Practice of Intelligent Separate Production Technology with Cable in Huabei Oilfield." Journal of Physics: Conference Series 2594, no. 1 (2023): 012033. http://dx.doi.org/10.1088/1742-6596/2594/1/012033.

Повний текст джерела
Анотація:
Abstract In order to improve the separate production effect of sandstone reservoir in Huabei Oilfield and give full play to the production capacity of medium and low permeability layers, the intelligent separate production technology with cable is designed and developed. The technology uses cable packer to seal each layer in the well, and a set of intelligent separate production device is connected to the corresponding string position of each target layer. During the production process, the intelligent separate production device can send instructions according to the ground control center Open
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kazakov, Alexander, Nikolai Pkhaiko, Konstantin Safronov, et al. "Production and Research of Low-Density Metal Materials." Infocommunications and Radio Technologies 5, no. 3 (2022): 342–52. http://dx.doi.org/10.29039/2587-9936.2022.05.3.25.

Повний текст джерела
Анотація:
For experiments on laser interaction with matter, a method has been developed for manufacturing a low-density material from aluminum and copper by the method of resistive sputtering in an inert gas – argon. Deposition was carried out at two gas pressures: 40 Pa and 440 Pa. The densities of the obtained samples were determined by the gravimetric method: the mass of the sprayed layer was measured by weighing the substrate before and after deposition, the volume was calculated based on measurements of the material thickness using an optical profilometer. The thickness of the deposition layer is 7
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Renbi, Abdelghani, та Jerker Delsing. "A novel production process for 10 μm microvias." International Symposium on Microelectronics 2017, № 1 (2017): 000468–72. http://dx.doi.org/10.4071/isom-2017-wp53_078.

Повний текст джерела
Анотація:
Abstract This work investigates the capability of drilling and metallization of microvias of diameter less than 10 μm with aspect ratios of 1–10, using a fully additive process. The microvia has been produced using a sequential build up layer of urethane through which the via has been produced. The urethane layer is applied using spin-coating. Current process setting produces a 15 μm layer thickness. For thicker urethane, multiple layers are applied. Drilling of the via-hole through is made using 266 nm UV laser. The metallisation of the via-hole was made using a process called Covalent Bonded
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Napadłek, Wojciech, and Adam Woźniak. "Influence of Laser Ablation Texturing on the 40NiCrMo6 Steel Surface Layer." Key Engineering Materials 604 (March 2014): 24–27. http://dx.doi.org/10.4028/www.scientific.net/kem.604.24.

Повний текст джерела
Анотація:
Laser texturing of the surface layer of materials is a modern technology with its significant prospects for production of engineering machinery. Produced with this technology oil micro-containers have a major impact on the tribological cooperation improving. The article presents methodology and results of laser texturing of surface layer of alloy steel 40NiCrMo6. The material is usually applied for foot rod of combustion engines production. Application of the laser ablation micro treatment on the side surfaces the foot of the rod allowed to fabricate desired texture in the surface layer, made
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Svéda, Mária, and András Roósz. "Development of Amorphous and Microstructured Surface Layer by Laser Surface Treatment." Materials Science Forum 752 (March 2013): 175–82. http://dx.doi.org/10.4028/www.scientific.net/msf.752.175.

Повний текст джерела
Анотація:
The aim of the research was to develop an amorphous and microstructured layer on non-amorphous alloys by laser surface treatment. The as-prepared Cu based master alloy ingots were imbedded in a metallic sinking with Wood metal to assure the good thermal conductivity during the laser treatment. The laser remelting, alloying and coating techniques were applied from the laser surface treatment techniques. The surface layer production and a subsequent rapid cooling were performed using CO2 laser and pulse and continuous modes of Nd:YAG laser. The characterization of the microstructure of the resul
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Čapková, Veronika, and Ivana Zetková. "RP Technology Used for the Production of Metal Parts." Materials Science Forum 818 (May 2015): 280–83. http://dx.doi.org/10.4028/www.scientific.net/msf.818.280.

Повний текст джерела
Анотація:
Rapid prototyping (RP) is a modern technology which can produce components with very complicated shapes using different materials. This method also allows the production of components with shapes and geometry that would be very difficult to produce using conventional methods such as milling, welding and so on. A 3D printer builds an object from bottom to top, layer by layer. The purpose of this article is to introduce rapid prototyping technology for printing metal products. It focuses on various areas of application, advantages and disadvantages of this manufacturing technology as well as int
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Metel, Alexander S., Tatiana Tarasova, Andrey Skorobogatov, Pavel Podrabinnik, Yury Melnik, and Sergey N. Grigoriev. "Feasibility of Production of Multimaterial Metal Objects by Laser-Directed Energy Deposition." Metals 12, no. 10 (2022): 1566. http://dx.doi.org/10.3390/met12101566.

Повний текст джерела
Анотація:
The article focuses on the possibility of manufacturing bimetallic products for specific industrial applications using laser-directed energy deposition (LDED) additive technology to replace the traditional brazing process. Preferential process regimes were determined by parametric analysis for the nickel-alloy–steel and molybdenum–steel pairs. Comparative studies of the microstructure and hardness of the deposited layers and the transition layer at the boundary of the alloyed materials have been carried out. It is shown that LDED provides better transition layer and operational properties of t
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Van Der Haar (nee Kosten), Katarina, and Manouchehr Haghighi. "A new approach for production forecasting from individual layers in multi-layer commingled tight gas reservoirs." APPEA Journal 62, no. 2 (2022): S192—S195. http://dx.doi.org/10.1071/aj21119.

Повний текст джерела
Анотація:
Estimating future production in multi-layer tight gas reservoirs is necessary, but problematic. Initial production looks promising but soon decreases to levels that are much lower than first anticipated. Boundary-dominated flow to which common production data analysis can be applied to, takes up to 8 years to establish, yet future production estimations must be made at the time of drilling. Common industry software does not fully assess individual layer contribution because large uncertainties exist in layer-specific contributions to total production. Many engineers tend to use analysis method
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Li, Yun Tao, Fei Xiang Jin, Ning Xu Wang, Qing Chang, and De Yu Liu. "The Influence of GGG70L Laser Surface Hardening Power on Quenched Layer Performance." Advanced Materials Research 774-776 (September 2013): 1051–54. http://dx.doi.org/10.4028/www.scientific.net/amr.774-776.1051.

Повний текст джерела
Анотація:
GGG70L die material laser phase change hardening aims to discover the Quenched Layer performance of the GGG70L die material hardened by the laser of different power. Making comparison and analysis in the experiment and considering the actual production factors such as cost, working efficiency and product quality standard, it is concluded that laser power being 1900 w, laser scanning speed 6mm/s, spot size 3×15 mm2, focal length being 305mm, the surface of the material quality can meet the requirements of industrial production, laser surface quenched layer becomes harder, good abrasion resistan
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Layer Production"

1

Libosvar, Camille. "Hierarchical production management : the flow-control layer." Metz, 1988. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/1988/Libosvar.Camille.SMZ8822.pdf.

Повний текст джерела
Анотація:
La gestion de production s'intéresse à une classe de décisions à prendre dans une entreprise de production de façon à lui faire atteindre son objectif. Comme le problème à résoudre est très vaste, il faut l'aborder au moyen d'une approche hiérarchisée. Les sytèmes de gestion hiérarchiques se caractérisent par plusieurs niveaux de décision coordonnés. Concevoir de tels systèmes suppose de définir les modèles à utiliser à chaque niveau (enntités, objectif, horizon), et une procédure de coordination. Les modèles étudiés dans ce mémoire sont destinés au niveau haut d'un système hiérarchique; l'out
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hartmann, Camilla. "Selection for yolk production in laying hens /." Uppsala : Swedish Univ. of Agricultural Sciences (Sveriges lantbruksuniv.), 2001. http://epsilon.slu.se/avh/2001/91-576-5807-2.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lamb, Clare. "Stable carbon isotope variation during natural chloromethane and bromomethane production." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343035.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Andres, Britta. "Low-Cost, Environmentally Friendly Electric Double-Layer Capacitors : Conept, Materials and Production." Doctoral thesis, Mittuniversitetet, Avdelningen för naturvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-31539.

Повний текст джерела
Анотація:
Today’s society is currently performing an exit from fossilfuel energy sources. The change to sustainable alternativesrequires inexpensive and environmentally friendly energy storagedevices. However, most current devices contain expensive,rare or toxic materials. These materials must be replaced bylow-cost, abundant, nontoxic components.In this thesis, I suggest the production of paper-based electricdouble-layer capacitors (EDLCs) to meet the demand oflow-cost energy storage devices that provide high power density.To fulfill the requirements of sustainable and environmentallyfriendly devices,
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wu, Xiongjun. "Flow structures, mixing and droplet production in a fuel-water stratified shear layer." Available to US Hopkins community, 2002. http://wwwlib.umi.com/dissertations/dlnow/3068232.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Cardozo, Benjamin Lewin. "GaAs Blocked-Impurity-Band Detectors for Far-Infrared Astronomy." Berkeley, Calif. : Oak Ridge, Tenn. : Lawrence Berkeley National Laboratory ; distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2004. http://www.osti.gov/servlets/purl/840239-bSExpZ/native/.

Повний текст джерела
Анотація:
Thesis (Ph.D.); Submitted to the University of California, Berkeley, 210 Hearst Mining Memorial Bldg, Berkeley, CA 94720 (US); 21 Dec 2004.<br>Published through the Information Bridge: DOE Scientific and Technical Information. "LBNL--57248" Cardozo, Benjamin Lewin. USDOE. Office of Management Budget and Evaluation National Aeronautics and Space Administration. Ames Research Center Orders A53228D and NNA04CA94I (US) 12/21/2004. Report is also available in paper and microfiche from NTIS.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wieland, Hanspeter, Stefan Giljum, and Martin Bruckner. "Structural production layer decomposition: a new method to measure differences between MRIO databases for footprint assessments." Taylor & Francis (Routledge), 2018. http://dx.doi.org/10.1080/09535314.2017.1350831.

Повний текст джерела
Анотація:
Recent empirical assessments revealed that footprint indicators calculated with various multi-regional input-output (MRIO) databases deliver deviating results. In this paper, we propose a new method, called structural production layer decomposition (SPLD), which complements existing structural decomposition approaches. SPLD enables differentiating between effects stemming from specific parts in the technology matrix, e.g. trade blocks vs. domestic blocks, while still allowing to link the various effects to the total region footprint. Using the carbon footprint of the EU-28 in 2011 as an exampl
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sadeghimeresht, Esmaeil. "Corrosion Behavior of HVAF-Sprayed Bi-Layer Coatings." Licentiate thesis, Högskolan Väst, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-9929.

Повний текст джерела
Анотація:
In a variety of engineering applications, components are subjected to corrosive environment. Protective coatings are essential to improve the functional performances and/or extend the lifetime of the components. Thermal sprayingas a cost-effective coating deposition technique offers high flexibility in coatings' chemistry/morphology/microstructure design. However, the inherent pores formed during spraying limit the use of coatings for corrosion protection. The recently developed supersonic spray method, High-Velocity-Air-Fuel (HVAF), brings significant advantages in terms of cost and coating p
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Luoma, Amanda Elaine. "Effect of synbiotic and organic acid plus phytochemical product supplementation on layer production performance and immune parameters." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1462548271.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Selaledi, Lesego Gaborone Amos. "The influence of different energy, lysine and methionine levels on layer performance." Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/53128.

Повний текст джерела
Анотація:
Assignment (MPhil)--University of Stellenbosch, 2002.<br>ENGLISH ABSTRACT: The study conducted was aiming on evaluating the influence of different levels of energy and amino acids, mainly lysine and methionine, on production performance of the layer bird. There were three treatments, namely the Control diet, a high energy, lysine and methionine diet (High spec.) and a low energy, lysine and methionine diet (Low spec.). The energy levels were 11.2 MJ/kg, 11.5 MJ/kg and 10.9 MJ/kg respectively. Lysine levels were 0.67%, 0.73% and 0.63% whereas methionine levels were 0.36%, 0.38% and 0.34%
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Layer Production"

1

Schmisseur, Ed. XLAYER: A commercial layer management program. Agricultural Experiment Station, Oregon State University, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

White, David Andrew. Relationships between growth-layer production and crown structure in red oak, Quercus rubra L. National Library of Canada = Bibliothèque nationale du Canada, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sanford, Richard F. DIFDEC2, BASIC program for calculating production, diffusion, and reaction of two components in a tabular layer. U.S. Dept. of the Interiro, Geological Survey, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Sanford, Richard F. DIFDEC2, BASIC program for calculating production, diffusion, and reaction of two components in a tabular layer. U.S. Dept. of the Interiro, Geological Survey, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sanford, Richard F. DIFDEC2, BASIC program for calculating production, diffusion, and reaction of two components in a tabular layer. U.S. Dept. of the Interiro, Geological Survey, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Miotello, Antonio, and Paolo M. Ossi, eds. Laser-Surface Interactions for New Materials Production. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-03307-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

PPLA 2003, Messina and Catania, Italy, 18-19 September 2003. Plasma Production by Laser Ablation: PPLA 2003. World Scientific Publishing, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ritzert, Frank J. Laser-heated floating zone production of single-crystal fibers. Lewis Research Center, 1996.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Jalufka, N. W. Laser production and heating of plasma for MHD application. National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Jalufka, N. W. Laser production and heating of plasma for MHD application. National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Layer Production"

1

Pinheiro, Ana C., Ana I. Bourbon, Joana T. Martins, Philippe E. Ramos, António A. Vicente, and Maria G. Carneiro-da-Cunha. "Nanolaminated Systems Production by Layer-by-Layer Technique." In Advances in Processing Technologies for Bio-based Nanosystems in Food. CRC Press, 2019. http://dx.doi.org/10.1201/9781315177328-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kutscherauer, Leonhard, Christian Bernauer, Christian Geiger, and Michael F. Zaeh. "Toward a Fully Controlled Wire-Based Laser Metal Deposition Process Through Layer-to-Layer Melt Pool Temperature Control." In Lecture Notes in Production Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-86893-1_28.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Hwang, Cheol Seong, Seong Keun Kim, and Sang Woon Lee. "Mass-Production Memories (DRAM and Flash)." In Atomic Layer Deposition for Semiconductors. Springer US, 2013. http://dx.doi.org/10.1007/978-1-4614-8054-9_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Baumgärtner, Benjamin, and Tino Hausotte. "Geometric Measurement and Testing Technology for Additive Manufacturing." In Springer Tracts in Additive Manufacturing. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-78350-0_16.

Повний текст джерела
Анотація:
Abstract Although powder-based additive manufacturing processes have great potential for the toolless production of complex and individual components with almost unlimited design freedom, they have only hesitantly been used for the flexible production of individual workpieces. One reason for this is the unacceptable quality deficits in terms of geometrical accuracy and component strength. In the case of selective laser melting (SLM), these are induced not only by component distortion during cooling, but also by fluctuations in the process parameters and influencing factors such as laser energy
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Decher, G., J. D. Hong, K. Lowack, Y. Lvov, and J. Schmitt. "Layer-by-Layer Adsorption: The Solid/Liquid-Interface as a Template for the Controlled Growth of Well-Defined Nanostructures of Polyelectrolytes, Proteins, DNA and Polynucleotides." In Self-Production of Supramolecular Structures. Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0754-9_23.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Michalakopoulos, Theodore N., Christos P. Roumpos, Michael J. Galetakis, and George N. Panagiotou. "Discrete-Event Simulation of Continuous Mining Systems in Multi-layer Lignite Deposits." In Lecture Notes in Production Engineering. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-12301-1_21.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zhang, Hai-bo, Zhi-jun Liu, Jiao-jiao Liu, Qian Liu, and Chao Jia. "Production Allocation Analysis of Commingle Production Wells in Multi-layer Tight Gas Reservoirs." In Springer Series in Geomechanics and Geoengineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0761-5_64.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Yamanaka, Shinya, Mai Takase, and Yoshikazu Kuga. "Production of Single- and Few-Layer Graphene from Graphite." In Carbon-related Materials in Recognition of Nobel Lectures by Prof. Akira Suzuki in ICCE. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61651-3_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Schulze, I. M., A. Bolte, W. Schmidt, and J. Eichhorn. "Phytomass, Litter and Net Primary Production of Herbaceous Layer." In Ecological Studies. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/b82392_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kohama, Y. P., P. H. Alfredsson, Y. Egami, and M. Kawakami. "Turbulent Energy Production Mechanism in General Boundary Layer Transition." In Laminar-Turbulent Transition. Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-03997-7_29.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Layer Production"

1

Schmidt, Alexander, Julian Schalling, Nico Wieprecht, Lucas Janisch, Jörg Franke, and Alexander Kühl. "Investigation of Layer Thickness Distribution and Surface Defects on Screen-Printed Magnetic Sheets." In 2024 14th International Electric Drives Production Conference (EDPC). IEEE, 2024. https://doi.org/10.1109/edpc63771.2024.10932854.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Pansare, Pallavi, ManMohan Tripathi, and Amit Gupta. "An Efficient 3D Data Annotation and Object Detection Pipeline for Production Line." In 2024 IEEE International Conference on Omni-layer Intelligent Systems (COINS). IEEE, 2024. http://dx.doi.org/10.1109/coins61597.2024.10622624.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Muller, Christoph, and Markus Schneider. "GREEN FACTORY DESIGN WITH SMART MULTI LAYER." In SGEM International Multidisciplinary Scientific GeoConference. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024v/6.2/s26.38.

Повний текст джерела
Анотація:
Even today, factories and production systems are primarily planned using established methods from lean production, developed in the 1990s, which only partially address sustainability. Industrial production significantly impacts climate change; in Germany, for instance, 70% (9.1 million TJ) of the primary energy requirement of 13 million TJ comes from industry, and around 28% of annual new land use is attributed to industrial expansion and new construction. This situation is no longer viable, given the European Commission�s energy efficiency targets for 2030 and the roadmap to achieve no net la
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Rönn, John, Sauli Virtanen, Emmanuele Sortino, Philipp Maydannik, and Sami Sneck. "Spatial atomic layer deposition: a new revolution in ultra-fast production of conformal optical interference coatings." In Optical Interference Coatings. Optica Publishing Group, 2025. https://doi.org/10.1364/oic.2025.thc.5.

Повний текст джерела
Анотація:
We present conformal, stress-neutral, low-loss, and durable optical interference coatings fabricated with a novel spatial atomic layer deposition that enables thin film deposition up to two orders of magnitude faster than traditional atomic layer deposition.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Shah, P. C., and J. B. Spath. "Transient Wellbore Pressure and Flow Rates in a Commingled System With Different Layer Pressures." In SPE Production Operations Symposium. Society of Petroleum Engineers, 1993. http://dx.doi.org/10.2118/25423-ms.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Yuning, Wang, Wang Xin, Cai Meng, Liu Renyong, Yue Qingfeng, and Yang Qinghai. "A Cable-Controlled Separate-Layer Production Technology." In SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/176412-ms.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ahmed, Mohamed Abdelaziz, Francois Pitite, and Anil Kokaram. "Motion Estimation for Regions of Reflections through Layer Separation." In 2011 Conference for Visual Media Production (CVMP). IEEE, 2011. http://dx.doi.org/10.1109/cvmp.2011.12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

D'Hondt, O., and V. Caselles. "Unsupervised Motion Layer Segmentation by Random Sampling and Energy Minimization." In 2010 Conference on Visual Media Production (CVMP). IEEE, 2010. http://dx.doi.org/10.1109/cvmp.2010.25.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Ulanov, Nikolay. "INFLUENCE OF ATMOSPHERIC PRECIPITATION ON THE EFFICIENCY OF SLUICING IN THE CONDITIONS OF DEPLETED PEATLANDS." In Multifunctional adaptive fodder production. Federal Williams Research Center of Forage Production and Agroecology, 2020. http://dx.doi.org/10.33814/mak-2020-24-72-44-48.

Повний текст джерела
Анотація:
The paper presents data on the nature of the influence of atmospheric precipitation on the process of forming the yield of main forage crops in areas with different drainage rates, capacity of the residual peat layer and regularity of the water regime.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Savio, Domnic, Stamatis Karnouskos, Daniel Wuwer, and Thomas Bangemann. "Dynamically Optimized Production Planning Using Cross-Layer SOA." In 2008 32nd Annual IEEE International Computer Software and Applications Conference. IEEE, 2008. http://dx.doi.org/10.1109/compsac.2008.219.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Layer Production"

1

Falco, R. E. Sensitivity to Turbulent Boundary Layer Production Mechanisms to Turbulence Control. Defense Technical Information Center, 1991. http://dx.doi.org/10.21236/ada250210.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Strauss, Bernhard, Britta Kleinsorge, and Pantea Lotfian. 3D printing technologies in the food system for food production and packaging. Food Standards Agency, 2023. http://dx.doi.org/10.46756/sci.fsa.suv860.

Повний текст джерела
Анотація:
3D printing, also called additive manufacturing, represents a range of technologies that create 3D objects through a layer-by-layer deposition process using digital image files. 3D printing evolved over the past four decades from a prototyping tool to a manufacturing method in its own right in a number of industries and several additive manufacturing processes have matured into robust production technologies for highly customised and bespoke products when produced in small numbers. However, 3D printing technologies at their current stage of evolution are usually not considered commercially via
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lawal, Adeniyi. Dual Layer Monolith ATR of Pyrolysis Oil for Distributed Synthesis Gas Production. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1076999.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Cerio, Frank. Development of Production PVD-AIN Buffer Layer System and Processes to Reduce Epitaxy Costs and Increase LED Efficiency. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1111425.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Dehaene, Michiel, Daniel López-García, Jana Fried, et al. SOIL NEXUS: Urban soil care for food production, community greenspace, and environmental resilience. Coventry University, 2024. https://doi.org/10.18552/cawr/2024/0002.

Повний текст джерела
Анотація:
Global urbanisation is leading to the degradation of living soils, with substantial and direct impacts on climate, biodiversity, food security, and human health. Urban land use policies are beginning to address soil protection. However, they rarely address the depollution and remediation of urban soils and the revitalisation of the agricultural socio-economic fabric, both essential to recover and maintain healthy soils. Instead polluted soils are often managed through further soil sealing (i.e. covering with a plastic ‘geotextile’ layer to isolate it and adding new soil on top). As alternative
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Beach, Erin, Behnam Abasht, Rohan L. Fernando, et al. Extent and Consistency of Linkage Disequilibrium and Identification of DNA Markers for Production and Egg Quality Traits in Commercial Layer Chicken Populations. Iowa State University, 2009. http://dx.doi.org/10.31274/ans_air-180814-817.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Aguiar, Angel, Caitlyn Carrico, Thomas Hertel, Zekarias Hussein, Robert McDougall, and Badri Narayanan. Extending the GTAP framework for public procurement analysis. GTAP Working Paper, 2016. http://dx.doi.org/10.21642/gtap.wp82.

Повний текст джерела
Анотація:
This paper extends the GTAP framework to aid in the analysis of changes to public procurement policies. In terms of data developments, government investment demand data is estimated for each of the 57 GTAP Commodities in the 140 regions of version 9. In addition, the origin of imports by end use (i.e., for firms, private consumption, government consumption, and investment) is determined following the recent literature. Another layer of valuation is also introduced, which captures the preferences towards domestic production. In terms of model extensions, there is a new nest in the production st
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Trees, C. C. Primary production off Southern California relative to surface layer carbon budgets: A component of the California Basins Study, CaBS. Final report, [1 June 1989--14 November 1991]. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10154420.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Audsley, Neil, Gonzalo Avila, Claudio Ioratti, et al. Red necked longicorn, Aromia bungii (Faldermann). Euphresco, 2023. http://dx.doi.org/10.1079/20240228447.

Повний текст джерела
Анотація:
The red necked longicorn (RNL), Aromia bungii (Coleoptera: Cerambycidae), originates from eastern Asia and has become an invasive pest in Japan, Germany and Italy. Predominantly attacking stone fruit trees (Prunus spp.), RNL larvae tunnel within the cambium layer, disrupting sap flow and potentially killing the host tree. The pest poses a significant threat to both fruit production and wood production. It is considered a quarantine species in Europe, capable of spreading through wood products and plants for planting. There has been no classical biological control implemented against RNL. Howev
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Schmidt, T. Production of Testing of Laser Crystals. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/4283.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Layer Production" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії