Увійти

Готові списки джерел за темами / Magnesium metal matrix nanocomposites / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Magnesium metal matrix nanocomposites.

Статті в журналах з теми "Magnesium metal matrix nanocomposites"

Автор: Grafiati

Опубліковано: 10 грудня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Magnesium metal matrix nanocomposites".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Parthiban, K., and Lakshmanan Poovazhgan. "Ultrasonication Assisted Fabrication of Aluminum and Magnesium Matrix Nanocomposites - A Review." Materials Science Forum 979 (March 2020): 63–67. http://dx.doi.org/10.4028/www.scientific.net/msf.979.63.

Повний текст джерела

Анотація:

Recent researches in the domain of casting confirmed that the mechanical properties of aluminum and magnesium based nanocomposites can be appreciably enhanced when ultrasonic cavitation assisted solidification processing is used. Ultrasonic cavitation assisted solidification processing is used for the manufacturing of aluminum and magnesium alloy based metal matrix nanocomposites reinforced with nanoceramic particles. In this solidification processing, formation of clusters have been minimized and the nanoreinforcements were distributed uniformly in aluminum and magnesium matrix nanocomposites

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Malaki, Massoud, Wenwu Xu, Ashish Kasar, et al. "Advanced Metal Matrix Nanocomposites." Metals 9, no. 3 (2019): 330. http://dx.doi.org/10.3390/met9030330.

Повний текст джерела

Анотація:

Lightweight high-strength metal matrix nano-composites (MMNCs) can be used in a wide variety of applications, e.g., aerospace, automotive, and biomedical engineering, owing to their sustainability, increased specific strength/stiffness, enhanced elevated temperature strength, improved wear, or corrosion resistance. A metallic matrix, commonly comprising of light aluminum or magnesium alloys, can be significantly strengthened even by very low weight fractions (~1 wt%) of well-dispersed nanoparticles. This review discusses the recent advancements in the fabrication of metal matrix nanocomposites

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Han, Guo Qiang, Wen Bo Du, Zhao Hui Wang, Ke Liu, Shu Bo Li, and Xian Du. "Effective Dispersion of CNTs to Fabricate CNT/Mg Nanocomposite." Materials Science Forum 816 (April 2015): 470–75. http://dx.doi.org/10.4028/www.scientific.net/msf.816.470.

Повний текст джерела

Анотація:

An effective dispersion process to cast CNT-reinforced in a concentrated magnesium alloy (AZ31) nanocomposite was investigated in this study. The metal magnesium powder was first coated with dispersed CNTs by wet process, followed by the fabricating of CNT/Mg precursor using mechanical briquetting and extrusion. The resultant precursor was then added into AZ31 alloy during the melting process. Finally, CNT/Mg nanocomposites with grain refinement matrix composite were fabricated in as-cast and as-extruded. Compared with the commercial AZ31 alloy, CNT/Mg nanocomposites exhibited higher yield str

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Naveen Srinivas, Madugula, Parthiban Krishnan, Veerappan Selvam, et al. "An investigation on the mechanical and corrosion characteristics of magnesium-zinc alloy nanocomposites manufactured via ultrasound-assisted stir squeeze casting." Metallurgical Research & Technology 121, no. 6 (2024): 621. http://dx.doi.org/10.1051/metal/2024094.

Повний текст джерела

Анотація:

Magnesium alloy (Mg-Zn) was strengthened by including silicon carbide nanoparticles at different weight rates (0, 0.5, 1.0, and 1.5 wt%). The fabrication process involved the help of ultrasonication-assisted stir squeeze casting method. We studied the mechanical, microstructural, and corrosion quality of nanocomposites in relation to variations in SiC particle weight percentage and grain size. A comparison was made between the experimental results and the basic alloy. The findings show that nanocomposites’ mechanical characteristics improve as the SiC particle concentration rises and falls as

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ivkov, Sergey A., Konstantin A. Barkov, Evelina P. Domashevskaya, et al. "Nonlinear Transport and Magnetic/Magneto-Optical Properties of Cox(MgF2)100-x Nanostructures." Applied Sciences 13, no. 5 (2023): 2992. http://dx.doi.org/10.3390/app13052992.

Повний текст джерела

Анотація:

The aim of this work was to comprehensively study the effect of the variable atomic composition and structural-phase state of Cox(MgF2)100-x nanocomposites on their nonlinear transport and magnetic/magneto-optical properties. Micrometer-thick nanocomposite layers on glass substrates were obtained by means of ion-beam sputtering of a composite target in the argon atmosphere in a wide range of compositions (x = 16–59 at.%). Using a low metal content in the nanocomposite, magnesium fluoride was kept in the nanocrystalline state. As the metal content increased, nanocrystalline cobalt was formed. T

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Kumar, Dinesh, and Lalit Thakur. "Recent Studies on the Fabrication of Magnesium Based Metal Matrix Nano-Composites by Using Ultrasonic Stir Casting Technique - A Review." Materials Science Forum 969 (August 2019): 889–94. http://dx.doi.org/10.4028/www.scientific.net/msf.969.889.

Повний текст джерела

Анотація:

This paper presents the recent studies on the fabrication of magnesium based metal matrix nanocomposites (MMMC) by using ultrasonic assisted stir casting technique. The pure metal and alloys, due to their limited mechanical properties are not suitable for various engineering applications. It has been observed that the addition of suitable reinforcements into metallic matrix improves the specific strength, ultimate tensile strength, porosity and wear properties as compared to the conventional and monolithic engineering materials for aerospace and automotive applications. The effects of ultrason

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Chen, Yong, Yuan Yao, Shengli Han, Xiaowei Feng, Tiegang Luo, and Kaihong Zheng. "Study on Microstructure and Mechanical Properties of TC4/AZ31 Magnesium Matrix Nanocomposites." Materials 16, no. 3 (2023): 1139. http://dx.doi.org/10.3390/ma16031139.

Повний текст джерела

Анотація:

In the field of metal matrix composites, it is a great challenge to improve the strength and elongation of magnesium matrix composites simultaneously. In this work, xTC4/AZ31 (x = 0.5, 1, 1.5 wt.%) composites were fabricated by spark plasma sintering (SPS) followed by hot extrusion. Scanning electron microscopy (SEM) showed that nano-TC4 (Ti-6Al-4V) was well dispersed in the AZ31 matrix. We studied the microstructure evolution and tensile properties of the composites, and analyzed the strengthening mechanism of nano-TC4 on magnesium matrix composites. The results showed that magnesium matrix c

Стилі APA, Harvard, Vancouver, ISO та ін.

8

De Cicco, Michael, Lih Sheng Turng, Xiao Chun Li, and John H. Perepezko. "Semi-Solid Casting of Metal Matrix Nanocomposites." Solid State Phenomena 116-117 (October 2006): 478–83. http://dx.doi.org/10.4028/www.scientific.net/ssp.116-117.478.

Повний текст джерела

Анотація:

Semi-solid casting (SSC) techniques have proven useful in the mass production of high integrity castings for the automotive and other industries. Recent research has shown metal matrix nanocomposite (MMNC) materials to have greatly improved properties in comparison to their base metals. However, current methods of MMNC production are costly and time consuming. Thus development of a process that combines the integrity and cost effectiveness of semi-solid casting with the property improvement of MMNCs would have the potential to greatly improve cast part quality available to engineers in a wide

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Lee, Han Joo, Jae Kyung Han, Byung Min Ahn, Megumi Kawasaki, and Terence G. Langdon. "Mechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion Bonding." Materials Science Forum 879 (November 2016): 1068–73. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1068.

Повний текст джерела

Анотація:

High-pressure torsion (HPT) is one of the major severe plastic deformation (SPD) procedures where disk metals generally achieve exceptional grain refinement at ambient temperatures. HPT has been applied for the consolidation of metallic powders and bonding of machining chips whereas very limited reports examined the application of HPT for the fabrication of nanocomposites. An investigation was initiated to evaluate the potential for the formation of a metal matrix nanocomposite (MMNC) by processing two commercial metal disks of Al-1050 and ZK60 magnesium alloy through HPT at room temperature.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Dadkhah, Mehran, Abdollah Saboori, and Paolo Fino. "An Overview of the Recent Developments in Metal Matrix Nanocomposites Reinforced by Graphene." Materials 12, no. 17 (2019): 2823. http://dx.doi.org/10.3390/ma12172823.

Повний текст джерела

Анотація:

Two-dimensional graphene plateletes with unique mechanical, electrical and thermo-physical properties could attract more attention for their employed as reinforcements in the production of new metal matrix nanocomposites (MMNCs), due to superior characteristics, such as being lightweight, high strength and high performance. Over the last years, due to the rapid advances of nanotechnology, increasing demand for the development of advanced MMNCs for various applications, such as structural engineering and functional device applications, has been generated. The purpose of this work is to review r

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Larraza, Andres, Shane Burke, Pedram Sotoudehbagha, and Mehdi Razavi. "Fabrication and Processing of Magnesium-Based Metal Matrix Nanocomposites for Bioabsorbable Implants." Metals 14, no. 12 (2024): 1318. http://dx.doi.org/10.3390/met14121318.

Повний текст джерела

Анотація:

A novel magnesium (Mg)-based metal matrix nanocomposite (MMNC) was fabricated using ultrasonic melt treatment to promote the de-agglomeration of the bioactive glass–ceramic nanoparticles and the homogenization of the melt. The cast samples were then heat treated, machined, and hot rolled to reduce grain size and remove structural defects. Standard mechanical and electrochemical tests were conducted to determine the effect of fabrication and processing on the mechanical and corrosion properties of MMNCs. Compression tests, potentiodynamic polarization tests, electrochemical impedance spectrosco

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Abazari, Somayeh, Ali Shamsipur, Hamid Reza Bakhsheshi-Rad, et al. "Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review." Materials 13, no. 19 (2020): 4421. http://dx.doi.org/10.3390/ma13194421.

Повний текст джерела

Анотація:

In recent years considerable attention has been attracted to magnesium because of its light weight, high specific strength, and ease of recycling. Because of the growing demand for lightweight materials in aerospace, medical and automotive industries, magnesium-based metal matrix nanocomposites (MMNCs) reinforced with ceramic nanometer-sized particles, graphene nanoplatelets (GNPs) or carbon nanotubes (CNTs) were developed. CNTs have excellent material characteristics like low density, high tensile strength, high ratio of surface-to-volume, and high thermal conductivity that makes them attract

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Jia, X. Y., S. Y. Liu, F. P. Gao, Q. Y. Zhang, and W. Z. Li. "Magnesium matrix nanocomposites fabricated by ultrasonic assisted casting." International Journal of Cast Metals Research 22, no. 1-4 (2009): 196–99. http://dx.doi.org/10.1179/136404609x367704.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Chelliah, Nagaraj M., Padaikathan Pambannan, and MK Surappa. "Effects of processing conditions on solidification characteristics and mechanical properties of in situ magnesium metal matrix composites derived from polysilazane precursor." Journal of Composite Materials 53, no. 26-27 (2019): 3741–55. http://dx.doi.org/10.1177/0021998319846546.

Повний текст джерела

Анотація:

Polymer-derived in situ magnesium metal matrix composites (P-MMMCs) were fabricated by injecting a liquid or cross-linked polysilazane precursor into molten magnesium by a stir-casting method at two different melt temperatures of 700 and 800℃. Microstructural analysis reveals that the composites fabricated at 700℃ exhibit uni-modal grain size distribution having more or less columnar-shaped grain morphology. On the contrary, bi-modal grain size distribution with predominantly dendritic grain morphology occurs in the Mg matrix composites fabricated at 800℃. Such difference in grain morphology c

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Huang, Song-Jeng, Manas Sarkar, and Sathiyalingam Kannaiyan. "Microstructural Evaluation and Fracture Behavior of AZ31/Nb2O5 Metal Matrix Composite." Journal of Composites Science 6, no. 12 (2022): 390. http://dx.doi.org/10.3390/jcs6120390.

Повний текст джерела

Анотація:

There have been remarkable improvements in the research field of magnesium over the last few decades, especially in the magnesium metal matrix composite in which micro and nanoparticles are used as reinforcement. The dispersion phase of nanoparticles shows a better microstructural morphology than pure magnesium. The magnesium metal matrix nanocomposite shows improved strength with a balance of plasticity as compared to the traditional magnesium metal matrix composite. In this research, Nb2O5 (0 wt.%, 3 wt.%, and 6 wt.%) nanoparticles were used to reinforce AZ31 with the stir casting method, fo

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kousik Suraparaju, Subbarama, P. Venkatasreenivasula Reddy, P. Venkata Ramaiah, K. Dharma Reddy, and Sendhil Kumar Natarajan. "Optimization of Process Parameters in Drilling of Al6063 Reinforced with Magnesium Oxide Nano Particles." Advanced Science, Engineering and Medicine 12, no. 10 (2020): 1303–8. http://dx.doi.org/10.1166/asem.2020.2583.

Повний текст джерела

Анотація:

Aluminum Nano Metal Matrix Composites are extensively utilized for high-performance operations such as branches of engineering and medicine due to their enhanced physical and mechanical properties compared to traditional metals and metal alloys. In this research, Al6063 alloy was reinforced with 15 nm sized Magnesium Oxide particles in different weight percentages. The development of Nano Metal Matrix Composites (NMMC) was completed through stir casting method at 750 °C temperature. The fabricated Nanocomposites were examined for the mechanical properties and impact of drilling parameters on c

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Dieringa, Hajo. "Processing of Magnesium-Based Metal Matrix Nanocomposites by Ultrasound-Assisted Particle Dispersion: A Review." Metals 8, no. 6 (2018): 431. http://dx.doi.org/10.3390/met8060431.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Giannopoulou, Danai, Hajo Dieringa, and Jan Bohlen. "Influence of AlN Nanoparticle Addition on Microstructure and Mechanical Properties of Extruded Pure Magnesium and an Aluminum-Free Mg-Zn-Y Alloy." Metals 9, no. 6 (2019): 667. http://dx.doi.org/10.3390/met9060667.

Повний текст джерела

Анотація:

A pure Mg and a ZW0303 alloy metal matrix nanocomposite reinforced with AlN nanoparticles were prepared assisted by mechanical stirring and sonication for deagglomeration of particles. The produced nanocomposites were investigated to determine the influence of the AlN nanoparticles during indirect extrusion on the microstructure and texture development, as well as the resulting hardness and mechanical properties. For pure Mg, grain refinement and hardness increase due to the addition of AlN were revealed in the as-cast and the extruded condition. For ZW0303, the same was found for the as-cast

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Fathi, M. H., M. Meratian, and M. Razavi. "Novel Magnesium-Nanofluorapatite Metal Matrix Nanocomposite with Improved Biodegradation Behavior." Journal of Biomedical Nanotechnology 7, no. 3 (2011): 441–45. http://dx.doi.org/10.1166/jbn.2011.1310.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Ferguson, J. B., Fariba Sheykh-Jaberi, Chang-Soo Kim, Pradeep K. Rohatgi, and Kyu Cho. "On the strength and strain to failure in particle-reinforced magnesium metal-matrix nanocomposites (Mg MMNCs)." Materials Science and Engineering: A 558 (December 2012): 193–204. http://dx.doi.org/10.1016/j.msea.2012.07.111.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Munir, Khurram, Cuie Wen, and Yuncang Li. "Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications." Journal of Magnesium and Alloys 8, no. 1 (2020): 269–90. http://dx.doi.org/10.1016/j.jma.2019.12.002.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Banerjee, Sudip, Suswagata Poria, Goutam Sutradhar, and Prasanta Sahoo. "Nanoindentation and Scratch Resistance Characteristics of AZ31–WC Nanocomposites." Journal of Molecular and Engineering Materials 07, no. 03n04 (2019): 1950007. http://dx.doi.org/10.1142/s2251237319500072.

Повний текст джерела

Анотація:

This work examines the effects of WC nanoparticles on nanohardness, elastic modulus and scratch-induced wear behavior of Mg-based metal matrix nanocomposites. Ultrasonic vibrator-equipped stir casting furnace is used to fabricate Mg–WC nanocomposites. Scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDAX) and X-ray diffraction (XRD) are employed to conduct the characterizations of base alloy and Mg–WC nanocomposites. Vickers microhardness tester is used to obtain the microhardness values of the fabricated materials. Nanoindentation tests are performed to find the effect of

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Luo, Xi, Leigang Zhang, Xu He, Jinling Liu, Ke Zhao, and Linan An. "Heterogeneous magnesium matrix nanocomposites with high bending strength and fracture toughness." Journal of Alloys and Compounds 855 (February 2021): 157359. http://dx.doi.org/10.1016/j.jallcom.2020.157359.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Kim, Chang-Soo, Il Sohn, Marjan Nezafati, et al. "Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)." Journal of Materials Science 48, no. 12 (2013): 4191–204. http://dx.doi.org/10.1007/s10853-013-7232-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Giannopoulou, Danai, Jan Bohlen, Noomane Ben Khalifa, and Hajo Dieringa. "Influence of Extrusion Rate on Microstructure and Mechanical Properties of Magnesium Alloy AM60 and an AM60-Based Metal Matrix Nanocomposite." Nanomaterials 12, no. 15 (2022): 2682. http://dx.doi.org/10.3390/nano12152682.

Повний текст джерела

Анотація:

Metal matrix nanocomposites are attracting attention because of their great potential for improved mechanical properties and possible functionalization. These hybrid materials are often produced by casting processes, but they can also develop their property profile after hot working, e.g., by forging or extrusion. In this study, a commercial cast magnesium alloy AM60 was enriched with 1 wt.% AlN nanoparticles and extruded into round bars with varied extrusion rates. The same process was carried out with unreinforced AM60 in order to determine the influences of the AlN nanoparticles in direct c

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Rabindranath, Jana, and Sinha Aditi. "Design of Nanomaterials in Hydrogen Storage." Education in Chemical Science and Technology Vol. 12, Feb 2023 (2023): 100–105. https://doi.org/10.5281/zenodo.7777284.

Повний текст джерела

Анотація:

<em>Dept. of Chemical Engineering, Haldia Institute of Technology </em> <em>ICARE Complex, Haldia – 721657, PurbaMedinipur, W.B., INDIA</em> <em>E-mail: </em><em>rabindrajana@yahoo.com</em> Nowadays hydrogen is considered to be a very useful fuel as it produces huge amount of energy along with water as the only bye product after burning with oxygen. But it is very difficult to store for a long time, as it is having the least molecular size and is capable of escaping even from intermolecular space of all materials, including metals. Researchers are engaged to find a probable solution; the

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Dieringa, Hajo, Lydia Katsarou, Ricardo Buzolin, et al. "Ultrasound Assisted Casting of an AM60 Based Metal Matrix Nanocomposite, Its Properties, and Recyclability." Metals 7, no. 10 (2017): 388. https://doi.org/10.3390/met7100388.

Повний текст джерела

Анотація:

An AM60 magnesium alloy nanocomposite reinforced with 1 wt % of AlN nanoparticles was prepared using an ultrasound (US) assisted permanent-mould indirect-chill casting process. Ultrasonically generated cavitation and acoustic streaming promoted de-agglomeration of particle clusters and distributed the particles throughout the melt. Significant grain refinement due to nucleation on the AlN nanoparticles was accompanied by an exceptional improvement in properties: yield strength increased by 103%, ultimate tensile strength by 115%, and ductility by 140%. Although good grain refinement was observ

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Gurau, Gheorghe, Carmela Gurau, Francisco Manuel Braz Fernandes, et al. "Structural Characteristics of Multilayered Ni-Ti Nanocomposite Fabricated by High Speed High Pressure Torsion (HSHPT)." Metals 10, no. 12 (2020): 1629. http://dx.doi.org/10.3390/met10121629.

Повний текст джерела

Анотація:

It is generally accepted that severe plastic deformation (SPD) has the ability to produce ultrafinegrained (UFG) and nanocrystalline materials in bulk. Recent developments in high pressure torsion (HPT) processes have led to the production of bimetallic composites using copper, aluminum or magnesium alloys. This article outlines a new approach to fabricate multilayered Ni-Ti nanocomposites by a patented SPD technique, namely, high speed high pressure torsion (HSHPT). The multilayered composite discs consist of Ni-Ti alloys of different composition: a shape memory alloy (SMA) Ti-rich, whose Mf

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Saberi, Abbas, Hamid Reza Bakhsheshi-Rad, Ahmad Fauzi Ismail, et al. "The Effect of Co-Encapsulated GO-Cu Nanofillers on Mechanical Properties, Cell Response, and Antibacterial Activities of Mg-Zn Composite." Metals 12, no. 2 (2022): 207. http://dx.doi.org/10.3390/met12020207.

Повний текст джерела

Анотація:

Magnesium-based composites have recently been studied as biodegradable materials for preparing orthopedic implants. In this article, the graphene oxide (GO) and GO-Cu nanosystem has been homogenously dispersed as a reinforcement in the matrix of Mg-Zn (MZ) alloy using the semi powder metallurgy (SPM) method, and subsequently, the composite has been successfully manufactured using the spark plasma sintering (SPS) process. GO and GO-Cu reinforced composite displayed a higher compressive strength (~55%) than the unreinforced Mg-Zn sample. GO and GO-Cu dual nanofillers presented a synergistic effe

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Issa, Hasan Kaser, Ali Maleki, Aboozar Taherizadeh, and Alireza Zargaran. "On the structure-properties relationship of amorphous and crystalline silica nanoparticles reinforced magnesium matrix nanocomposites." Journal of Alloys and Compounds 924 (November 2022): 166605. http://dx.doi.org/10.1016/j.jallcom.2022.166605.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Zhang, Congyang, Zhirui Li, Yongsheng Ye, et al. "Interaction of nanoparticles and dislocations with Mg17Al12 precipitates in n-SiCp/AZ91D magnesium matrix nanocomposites." Journal of Alloys and Compounds 815 (January 2020): 152416. http://dx.doi.org/10.1016/j.jallcom.2019.152416.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Nie, Kaibo, Yachao Guo, Kunkun Deng, and Xinkai Kang. "High strength TiCp/Mg-Zn-Ca magnesium matrix nanocomposites with improved formability at low temperature." Journal of Alloys and Compounds 792 (July 2019): 267–78. http://dx.doi.org/10.1016/j.jallcom.2019.04.028.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Huang, Song-Jeng, Sathiyalingam Kannaiyan, Manas Sarkar, and Matoke Peter Mose. "Enhancement of Mechanical Behaviors and Microstructure Evolution of Nano-Nb2O5/AZ31 Composite Processed via Equal-Channel Angular Pressing (ECAP)." Journal of Composites Science 7, no. 6 (2023): 230. http://dx.doi.org/10.3390/jcs7060230.

Повний текст джерела

Анотація:

The automobile industry uses magnesium for load-bearing components due to its low density, durability, and ductility. This study investigated a nanocomposite containing Nb2O5 (3 and 6 wt%) nanoparticles as reinforcement with AZ31 magnesium alloy made by stir casting. A severe plastic deformation was conducted on the cast samples via equal-channel angular pressing (ECAP) after homogenization at 410 °C for 24 h and aging at 200 °C for 10 h. The microstructural distributions and mechanical properties of the magnesium metal matrix composites (MMCs) reinforced with Nb2O5 nanoparticles were investig

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Mardi, Kumari Bimla, Amit Rai Dixit, Alokesh Pramanik, et al. "Surface Topography Analysis of Mg-Based Composites with Different Nanoparticle Contents Disintegrated Using Abrasive Water Jet." Materials 14, no. 19 (2021): 5471. http://dx.doi.org/10.3390/ma14195471.

Повний текст джерела

Анотація:

This study investigated the effect of abrasive water jet kinematic parameters, such as jet traverse speed and water pressure, on the surface of magnesium-based metal matrix nanocomposites (Mg-MMNCs) reinforced with 50 nm (average particle size) Al2O3 particles at concentrations of 0.66 and 1.11 wt.%. The extent of grooving caused by abrasive particles and irregularities in the abrasive waterjet machined surface with respect to traverse speed (20, 40, 250 and 500 mm/min), abrasive flow rate (200 and 300 g/min) and water pressure (100 and 400 MPa) was investigated using surface topography measur

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Subramani, Murugan, Song-Jeng Huang, and Konstantin Borodianskiy. "Effect of WS2 Nanotubes on the Mechanical and Wear Behaviors of AZ31 Stir Casted Magnesium Metal Matrix Composites." Journal of Composites Science 6, no. 7 (2022): 182. http://dx.doi.org/10.3390/jcs6070182.

Повний текст джерела

Анотація:

In this study, the AZ31 magnesium alloy was reinforced with tungsten disulfide (WS2) nanotubes to fabricate the nanocomposite using the stir casting method. The microstructural analysis, mechanical and wear behaviors were investigated with the effect of WS2 on the AZ31 alloy. Scanning electron microscopy (SEM) was used to conduct the microstructural analysis. The microstructures are revealed to incorporate the aluminum content with the WS2 nanotube, disclose the presence of the secondary phase, which was increased compared with the AZ31 alloy and was detected by energy dispersive spectroscopy

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Ballóková, Beáta, Ladislav Falat, Viktor Puchý, et al. "The Influence of Laser Surface Remelting on the Tribological Behavior of the ECAP-Processed AZ61 Mg Alloy and AZ61–Al2O3 Metal Matrix Composite." Materials 13, no. 12 (2020): 2688. http://dx.doi.org/10.3390/ma13122688.

Повний текст джерела

Анотація:

This paper deals with the tribological study of the laser remelted surfaces of the ECAP-processed AZ61 magnesium alloy and AZ61–Al2O3 metal matrix composite with 10 wt.% addition of Al2O3 nanoparticles. The study included the experimental optimization of the laser surface remelting conditions for the investigated materials by employing a 400 W continual wave fiber laser source. Tribological tests were performed in a conventional “ball-on-disc” configuration with a ceramic ZrO2 ball under a 5 N normal load and a sliding speed of 100 mm/s. The results showed that both the incorporation of Al2O3

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Islam, Nabila Akmalita Khairul, Nayona Ega Wicaksana, and Anne Zulfia Syahrial. "Effect of Nano-Al₂O₃ on Characteristics of Aluminium A356 Matrix Composite Produced by Stir Casting Route." Materials Science Forum 1000 (July 2020): 160–66. http://dx.doi.org/10.4028/www.scientific.net/msf.1000.160.

Повний текст джерела

Анотація:

Aluminium Matrix Composites (AMCs) made by A356 as matrix and nanoAl2O3 as reinforced are widely used for high performance application because of light weight and alumina has good performance at high temperature. In this study, the nanoAl2O3 used varied from 0.1 vf-% to 1.2 vf-%, which subsequently determined the optimum point. In addition, the magnesium with 10% are added as a wetting agent between aluminium and nanoAl2O3 as reinforced. Stir casting process is carried out for 2 minutes and 4 minutes for the degassing process using argon gasses then pouring molten metal in to the mold at 800°C

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Malakooti, Mohammad H., Michael R. Bockstaller, Krzysztof Matyjaszewski, and Carmel Majidi. "Liquid metal nanocomposites." Nanoscale Advances 2, no. 7 (2020): 2668–77. http://dx.doi.org/10.1039/d0na00148a.

Повний текст джерела

Анотація:

This is a progress report on liquid metal (LM) nanocomposites with focus on synthesis of LM nanodroplets, suspension of nanodroplets within various matrix materials, and methods for incorporating metallic nanoparticles within an LM matrix.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Luo, Xi, Xu He, Jinling Liu, et al. "Damage behavior of heterogeneous magnesium matrix nanocomposites." MRS Communications 10, no. 2 (2020): 359–64. http://dx.doi.org/10.1557/mrc.2020.35.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Song, X., P. Bayati, M. Gupta, M. Elahinia, and M. Haghshenas. "Fracture of magnesium matrix nanocomposites - A review." International Journal of Lightweight Materials and Manufacture 4, no. 1 (2021): 67–98. http://dx.doi.org/10.1016/j.ijlmm.2020.07.002.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Laurent, Ch, and A. Rousset. "Metal-Oxide Ceramic Matrix Nanocomposites." Key Engineering Materials 108-110 (July 1995): 405–6. http://dx.doi.org/10.4028/www.scientific.net/kem.108-110.405.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Tolochko, N. K., A. A. Andrushevich, and Yu A. Shienok. "Fabrication of Metal Matrix Nanocomposites." Advanced Materials Research 79-82 (August 2009): 425–28. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.425.

Повний текст джерела

Анотація:

Novel semisolid casting technique allowing producing the cast composites with highly homogeneous structure is suggested. In according with this technique specially prepared metal bil-lets containing reinforcing nanoparticles are subjected to partial melting and compacting and fol-lowing solidifying. Some model systems were used in order to demonstrate the potential possibili-ties of this technique in principle.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Liu, Shi Ying, Fei Peng Gao, Qiong Yuan Zhang, and Wen Zhen Li. "Mechanical Properties and Microstrutures of Nano-Sized SiC Particles Reinforced AZ91D Nanocomposites Fabricated by High Intensity Ultrasonic Assisted Casting." Materials Science Forum 618-619 (April 2009): 449–52. http://dx.doi.org/10.4028/www.scientific.net/msf.618-619.449.

Повний текст джерела

Анотація:

A high intensity ultrasonic assisted casting method was used to fabricate SiC nanoparticles reinforced magnesium matrix nanocomposites (n-SiCp/AZ91D). The microstructures and mechanical properties of the nanocomposites were investigated. The results show that n-SiCp are well dispersed in the matrix and the grain size was refined. A HRTEM study of the interface between n-SiCp and the matrix suggests that SiC bonds well with matrix without forming an intermediate phase. With the lower addition of n-SiCp, the mechanical properties of nanocomposites are greatly improved. As compared to an unreinfo

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Banerjee, Sudip, Prasanta Sahoo, and J. Paulo Davim. "Tribological characterisation of magnesium matrix nanocomposites: A review." Advances in Mechanical Engineering 13, no. 4 (2021): 168781402110090. http://dx.doi.org/10.1177/16878140211009025.

Повний текст джерела

Анотація:

Magnesium matrix nanocomposites (Mg-MNCs) are high grade materials widely used in aerospace, electronics, biomedical and automotive sectors for high strength to weight ratio, excellent sustainability and superior mechanical and tribological characteristics. Basic properties of Mg-MNCs rely on type and amount of reinforcement and fabrication process. Current study reviews existing literatures to explore contribution of different parameters on tribological properties of Mg-MNCs. Effects of particle size and amount of different reinforcements like SiC, WC, Al2O3, TiB2, CNT, graphene nano platelet

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Abdalla, Moataz, Austin Sims, Sherif Mehanny, Meysam Haghshenas, Manoj Gupta, and Hamdy Ibrahim. "In Vitro Electrochemical Corrosion Assessment of Magnesium Nanocomposites Reinforced with Samarium(III) Oxide and Silicon Dioxide Nanoparticles." Journal of Composites Science 6, no. 6 (2022): 154. http://dx.doi.org/10.3390/jcs6060154.

Повний текст джерела

Анотація:

Recent research on biodegradable magnesium-based implants has been focusing on increasing their mechanical strength and controlling their corrosion rate. One promising approach to significantly improve the mechanical properties of magnesium is the addition of nanoparticles to the magnesium matrix. However, there is limited research on the corrosion behavior of these new magnesium nanocomposites. In this study, the electrochemical corrosion characteristics of this new class of biomaterials are investigated. Two magnesium nanocomposites reinforced with nanoparticles (0.5, 1.0, and 1.5 Vol%) of s

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Malaki, Massoud, Alireza Fadaei Tehrani, and Behzad Niroumand. "Fatgiue behavior of metal matrix nanocomposites." Ceramics International 46, no. 15 (2020): 23326–36. http://dx.doi.org/10.1016/j.ceramint.2020.06.246.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Rudskoi, A. I. "Cu–C Metal Matrix Nanocomposites: Synthesis." Doklady Chemistry 493, no. 1 (2020): 108–11. http://dx.doi.org/10.1134/s0012500820370028.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Hassan, S. F., and M. Gupta. "Development and Characterization of Ductile Mg∕Y2O3 Nanocomposites." Journal of Engineering Materials and Technology 129, no. 3 (2007): 462–67. http://dx.doi.org/10.1115/1.2744418.

Повний текст джерела

Анотація:

Nano-Y2O3 particulates containing ductile magnesium nanocomposites were synthesized using blend-press-sinter powder metallurgy technique followed by hot extrusion. Microstructural characterization of the nanocomposite samples showed fairly uniform reinforcement distribution, good reinforcement-matrix interfacial integrity, significant grain refinement of magnesium matrix with increasing presence of reinforcement, and the presence of minimal porosity. Mechanical properties characterization revealed that the presence of nano-Y2O3 reinforcement leads to marginal increases in hardness, 0.2% yield

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Nandakumar, A., and D. Dinakaran. "Effect of Nanoparticles in Reinforced Metal Matrix Composite on the Machinability Characteristics - A Review." Applied Mechanics and Materials 813-814 (November 2015): 625–28. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.625.

Повний текст джерела

Анотація:

Metal Matrix nanoComposites (MMNC) refer to materials consisting of a ductile metal or alloy matrix in which some nanosized reinforcement materials is implanted. These materials combine metal and ceramic features, i.e., ductility and toughness with high strength. Thus, metal matrix nanocomposites are suitable for production of materials with high strength in shear/compression processes and high service temperature capabilities. Both Metal Matrix Composite (MMC) and Ceramic Matrix Composites (CMC) with Carbon nanoTubes (CNT) nanocomposites hold promise, but also pose challenges for real success

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Saranu, Ravikumar, Ratnam Chanamala, and SrinivasaRao Putti. "Review of Magnesium Metal Matrix Composites." IOP Conference Series: Materials Science and Engineering 961 (November 10, 2020): 012001. http://dx.doi.org/10.1088/1757-899x/961/1/012001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!