Увійти

Готові списки джерел за темами / Mechanical pinning block (MPB)

Зміст

Статті в журналах

Добірка наукової літератури з теми "Mechanical pinning block (MPB)"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Mechanical pinning block (MPB)".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Mechanical pinning block (MPB)"

1

Ghafouri, Moghaddam Mohammad Hossein, Moghaddam Mostafa Ghafouri, Ehsan Rakhshani, and Azizollah Mokhtari. "An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens." Biodiversity Data Journal 5 (October 9, 2017): e20648. https://doi.org/10.3897/BDJ.5.e20648.

Повний текст джерела

Анотація:

A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventio

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Zhu, W. Z., M. Yan, A. L. Kholkin, P. Q. Mantas, and J. L. Baptista. "Phase Diagram of the W-doped Pb(Zn1/3Nb2/3)O3–BaTiO3– PbTiO3 System Around a Morphotropic Phase Boundary Composition." Journal of Materials Research 17, no. 5 (2002): 1085–91. http://dx.doi.org/10.1557/jmr.2002.0160.

Повний текст джерела

Анотація:

The morphotropic phase boundary (MPB) composition that is characterized by the coexistence of rhombohedral and tetragonal phases in the Pb(Zn1/3Nb2/3)O3–BaTiO3– PbTiO3 system was modified by W-doping at the B site of a perovskite structural block. To maintain the electrical neutrality, creation of A-site vacancies was intentionally introduced in the formulation of the examined compositions. Incorporation of W ions was revealed to stabilize the tetragonal phase against the rhombohedral one, shifting the MPB toward the PZN-rich end at room temperature. High-temperature x-ray diffraction examinat

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Thusoo, Varun, and Shilaga Dhar. "Haematoma Block for Distal Radius Fracture Pain Management." Scholars Journal of Applied Medical Sciences 12, no. 03 (2024): 251–54. http://dx.doi.org/10.36347/sjams.2024.v12i03.006.

Повний текст джерела

Анотація:

Introduction: HB (Hematoma Block) is a commonly utilized technique all over the world to relieve discomfort during the management of DRF (Distal Radius Fractures). In this approach, 10ml to 15ml of 2 percent lignocaine, a topical anesthetic is utilized to reduce discomfort during the fracture reduction process. Materials & Methods: In this study, we recruited fifty individuals between January and December of 2023. Every patient had a distal radius extra-articular fracture that required percutaneous pinning or plaster casting. HB using 12 to 15 ml of 2% lignocaine was administered to the pa

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Schuster, Marcia Bär, Fernanda Ana Carraro Boaretto, Bruna Louise Silva, Luana Bettanin, and Marlene Bampi. "Influence of miscibility of PEG-B-PPG-B-PEG/EPOXY systems on thermal, mechanical and fracture properties." Cuadernos de Educación y Desarrollo 15, no. 12 (2023): 17095–116. http://dx.doi.org/10.55905/cuadv15n12-106.

Повний текст джерела

Анотація:

Epoxy matrix blends with poly (ethylene glycol)-block-poly (propylene glycol)-block-poly (ethylene glycol) triblock copolymer (PEG-b-PPG-b-PEG) with 30% PEG blocks were elaborated and investigated. The systems were prepared by the casting method with cure at 100 °C, with different amounts of copolymer in the epoxy matrix, and with the aim of evaluating the influence of the modifier on the properties of the blends. By DSC it was verified that the glass transition temperature relating to the matrix phase decreased in systems with copolymer in relation to neat epoxy, thus the blends formed partia

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Zhao, Zhong, Qiang Luo, and Zi Tian Fan. "Study on Microstructure and Mechanical Properties of Mg9AlZnGdY Magnesium Alloy after T6 in Lost Foam Casting." Advanced Materials Research 291-294 (July 2011): 565–68. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.565.

Повний текст джерела

Анотація:

The microstructures and mechanical properties of Mg9AlZnGdY alloy after T6 heat treatment in lost foam casting (LFC) are compared with that of AZ91D magnesium alloy. The results show that the microstructures of Mg9AlZnGdY alloy after T6 heat treatment consist of the α-Mg solid solution, β-Mg17Al12 precipitation phase, a small amount of rod Al2Y and block Al2Gd phases, which are distributed over grain boundaries of the α-Mg phase. The thermal stability of Al2Y and Al2Gd phases offers the pinning effect on the grain boundary under high temperature, and therefore, the grain boundary sliding is el

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Scheidt, Robert A., and W. Zev Rymer. "Control Strategies for the Transition From Multijoint to Single-Joint Arm Movements Studied Using a Simple Mechanical Constraint." Journal of Neurophysiology 83, no. 1 (2000): 1–12. http://dx.doi.org/10.1152/jn.2000.83.1.1.

Повний текст джерела

Анотація:

Changes were studied in neuromotor control that were evoked by constraining the motion of the elbow joint during planar, supported movements of the dominant arm in eight normal human subjects. Electromyograph (EMG) recordings from shoulder and arm muscles were used to determine whether the normal multijoint muscle activity patterns associated with reaching to a visual target were modified when the movement was reduced to a single-joint task, by pinning the elbow to a particular location in the planar work space. Three blocks of 150 movements each were used in the experiments. Subjects were pre

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Ding, Zhibing, Xuanle Zhi, Rui Xu, et al. "Effect of homogenization treatment on the morphology evolution of LPSO phase and the corresponding mechanical properties of Mg-8Gd-5Y-2.5Zn-0.6Zr alloys." Matéria (Rio de Janeiro) 30 (2025). https://doi.org/10.1590/1517-7076-rmat-2024-0840.

Повний текст джерела

Анотація:

ABSTRACT The morphology of LPSO phase, mechanical properties and fracture behavior of Mg-8Gd-5Y-2.5Zn-0.6Zr (wt%) alloy were systematically studied. The microstructure of as-cast and homogenized alloys is mainly composed of α-Mg matrix and Mg12(Gd,Y)Zn eutectic phase (LPSO phase). The as-cast alloy contains a large number of fine block 18R LPSO phases, which can be transformed into lamellar, rod-like and large block 14H LPSO phases after homogenization at 520°C for different time. Homogenization treatment can significantly improve the mechanical properties of Mg-8Gd-5Y-2.5Zn-0.6Zr alloy, espec

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Ghafouri Moghaddam, Mohammad Hossein, Mostafa Ghafouri Moghaddam, Ehsan Rakhshani, and Azizollah Mokhtari. "An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens." Biodiversity Data Journal 5 (October 9, 2017). http://dx.doi.org/10.3897/bdj.5.e20648.

Повний текст джерела

Анотація:

A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventio

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Ghaderi, Hamid, Abolfazl Semnani, and Omid Moini Jazani. "A new platform for designing high‐performance epoxy film adhesive with poly (butyl acrylate‐block‐styrene) block copolymer and alumina nano particles in aluminum–aluminum bonded joints: Preparation and analysis of the mechanical, adhesion, and thermal properties." Polymer Composites, March 13, 2024. http://dx.doi.org/10.1002/pc.28297.

Повний текст джерела

Анотація:

AbstractEpoxy film adhesives are typically used in different industries. However, these adhesives suffer from brittleness, low flexibility, and thermal stability problems. In this research, phenolic resin (Novolac) and poly (butyl acrylate‐block‐styrene) were used in the formulation of epoxy film adhesive (Diglycidyl ether bisphenol A) to increase thermal stability and adhesion strength and as the toughening agent, respectively. Alumina nanoparticles were also employed to enhance the mechanical properties. The influence of block copolymer and alumina nano particles was also assessed on the mec

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Rao Arsalan Khushnood, Sajjad Ahmad, Giuseppe Andrea Ferro, Luciana Restuccia, Jean Marc Tulliani, and Pravin Jagdale. "Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers." Frattura ed Integrità Strutturale, no. 34 (September 29, 2015). http://dx.doi.org/10.3221/igf-esis.34.59.

Повний текст джерела

Анотація:

A novel cost-effective alternative in the form of nano/micro carbonized particles produced from waste bagasse fibers has been explored to modify the mechanical properties and fracture pattern of the resulting cementitious composites. Carbonized bagasse particles were produced at Politecnico di Torino and characterized by Raman spectroscopy and scanning electron microscopy. When added with cement paste up to 1 wt% in six different proportions, the carbonized bagasse particles were found effective in significant enhancement of mechanical strength as well as fracture toughness. From micro-graphic

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!