Увійти

Готові списки джерел за темами / Mesh layer / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Mesh layer.

Статті в журналах з теми "Mesh layer"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Mesh layer".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Garanzha, Vladimir A., Lyudmila N. Kudryavtseva, and Aleksei I. Belokrys-Fedotov. "Single and multiple springback technique for construction and control of thick prismatic mesh layers." Russian Journal of Numerical Analysis and Mathematical Modelling 36, no. 1 (2021): 1–15. http://dx.doi.org/10.1515/rnam-2021-0001.

Повний текст джерела

Анотація:

Abstract We suggest an algorithm for construction of semi-structured thick prismatic mesh layers which guarantees an absence of inverted prismatic cells in resulting layer and allows one to control near-surface mesh orthogonality. Initial mesh is modelled as a thin layer of highly compressed prisms made of hyperelastic material glued to the triangulated surface. In order to compute robust normals at the vertices of the surface mesh we use quadratic programming algorithm based on the nearest ball concept. This pre-stressed material expands, possibly with self-penetration and extrusion to exteri

Стилі APA, Harvard, Vancouver, ISO та ін.

2

YERLİYURT, Kaan, and Sinan EĞRİ. "Effect of Knitting Pattern of PP Mesh on the Flexural Properties of Heat-cured PMMA Denture Base Resin." Cumhuriyet Science Journal 44, no. 3 (2023): 464–69. http://dx.doi.org/10.17776/csj.1184249.

Повний текст джерела

Анотація:

Heat-cured polymethyl methacrylate is (PMMA) is the most common denture base material and some mechanical properties such as flexural strength and impact resistance etc. may lead to fail, besides its excellent properties. Polypropylene (PP) hernia mesh is a commercially available medical textile used in surgical repair of different types of hernia. It was aimed to investigate the effect of two different knitting patterns of PP meshes on the flexural properties of the PMMA denture base resin when they are used as reinforcement and compare with glass fiber mesh reinforced and no mesh used resins

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Wu, Ang, Juan Hua Zhu, and Juan Fang Zhu. "Research on MAC Layer Supporting MESH Model in IEEE 802.16." Advanced Materials Research 187 (February 2011): 746–51. http://dx.doi.org/10.4028/www.scientific.net/amr.187.746.

Повний текст джерела

Анотація:

IEEE802.16 standard provides interface protocol of wireless access system for physical (PHY) layer and Medium Access Control (MAC) layer. It supports two kinds of network topology: Point to Multi-point (PMP) and Mesh. This paper descries the MESH model characteristics and how MESH Model was supported in MAC layer by introducing full process of new nodes in Mesh mode accessing network. Furthermore, On the basis of comparing PMP model and MESH mode in MAC-layer structure, function and requirements, it comes to the conclusion: MESH nodes can access network faster and cost less than PMP nodes. Whi

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Vorkapić, Miloš, Danica M. Bajić, Marija Baltić, Dušan Nešić, and Ivana Mladenović. "Mechanical properties of laminate materials based on polylactic acid and polyvinyl chloride meshes as reinforcement." Tribology and Materials 3, no. 1 (2024): 35–43. http://dx.doi.org/10.46793/tribomat.2024.005.

Повний текст джерела

Анотація:

The 3D printing parameters are known to have a significant impact on manufactured parts, and the layered morphology of these parts makes mechanical design analysis for engineering applications difficult. In this work, the tensile strengths and microhardness of 3D printed polylactic acid (PLA) specimens with different orientations and numbers of individual layers of mesh material (polyvinyl chloride – PVC) were investigated as a laminate composite. Composite specimens were obtained using 3D printing via fused deposition modelling (FDM). Moreover, the influence of printing parameters (i.e. infil

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Yang, L. X., R. G. Allen, K. Scott, P. Christensen, and S. Roy. "A New PtRu Anode Formed by Thermal Decomposition for the Direct Method Fuel Cell." Journal of Fuel Cell Science and Technology 2, no. 2 (2004): 104–10. http://dx.doi.org/10.1115/1.1867975.

Повний текст джерела

Анотація:

New PtRu catalyst anodes for methanol oxidation were prepared by a thermal decomposition method on titanium mesh supports. The supports employed were: Single layer (titanium mesh), double layer (two layers of titanium mesh were spot-welded together), and triple layer (two layers of titanium mesh with carbon paper between were spot-welded together). The catalytic activity of such anodes for the oxidation of methanol was characterized using galvanostatic measurements and electrochemical impedance spectroscopy in combination with scanning electron microscopy. The results showed that the PtRu cata

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Mehmood, Tahir, Muhammad Amer Abid, Burachat Chatveera, et al. "Sustainable Reinforcement Methods for Brick Masonry Walls: An Experimental and Finite Element Analysis Approach." Buildings 15, no. 13 (2025): 2180. https://doi.org/10.3390/buildings15132180.

Повний текст джерела

Анотація:

This study investigates the enhancement of axial and shear strength in brick masonry walls reinforced with steel and fiberglass meshes. The novelty of this study lies in its thorough evaluation of various reinforcement types and their influence on both axial and shear strength, offering valuable insights to enhance the performance of brick masonry structures. By using steel and fiberglass meshes for reinforcement, the study promotes the use of durable materials that can extend the lifespan of brick masonry structures, reducing the need for frequent repairs and replacements. The findings reveal

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Lin, Hong, Qin Kong, Xinyu Xu, et al. "Higher Soil Mesofauna Abundance and Microbial Activities Drive Litter Decomposition in Subtropical Forests." Diversity 16, no. 11 (2024): 700. http://dx.doi.org/10.3390/d16110700.

Повний текст джерела

Анотація:

Soil fauna play an important role in litter decomposition and affect the “home-field advantage” (HFA) of litter decomposition. However, how this effect is modulated by the microenvironment needs further investigation. We conducted a reciprocal transplant experiment of litter decomposition using different mesh-size litterbags across litter and soil layers in subtropical coniferous (Pinus massoniana) and broad-leaved (Quercus variabilis) forests. Our results revealed a pronounced HFA in P. massoniana. P. massoniana litter decomposed faster in its home habitat by 40.6% in the litter layer and 10.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Akhil, Avirneni, Vikram Yogish, N. Sivarajan, et al. "Comparison between Dual Layer Intraperitoneal Mesh and Single Layer Mesh for Laparoscopic Ventral and Incisional Hernia Repair." Journal of Evolution of Medical and Dental Sciences 10, no. 25 (2021): 1871–75. http://dx.doi.org/10.14260/jemds/2021/387.

Повний текст джерела

Анотація:

BACKGROUND A hernia is the abnormal exit of tissue or an organ, such as the bowel, through the wall of the cavity in which it normally resides. Hernias come in a variety of forms. The abdomen, specifically the groin, is most frequently involved. Incisional hernias and other ventral hernias are common surgical problems. A prosthetic mesh should always be used in ventral hernia repair (VHR). Now, the polypropylene mesh (PPM) has become the prosthetic mesh of choice in the repair of hernias, including inguinal hernia. Newer meshes are introduced, claiming lesser complication rate, but are invaria

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Rashid, Muhammad Harunur, Zahangir Alam, Firoz Mahmud, and M. S. Anita. "Durability and Performance of Ferrocement Infill Wall Panel." Civil Engineering Journal 5, no. 6 (2019): 1205–13. http://dx.doi.org/10.28991/cej-2019-03091325.

Повний текст джерела

Анотація:

Ferrocement is composed of cement mortar reinforced with small diameter closely spaced steel wire mesh to form a thin section conforming high performance of serviceability. The present study investigates the performance of ferrocement panels focused on the mechanical properties, water absorption and durability. A series of specimens were cast with single and double mesh layers. Flexural performance was carried out following sixty days in temperature cycle and in corrosion cell. These results was compared with the controlled sample. The test results shows that the flexural strength performance

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Yao, Chuan Qin, Xue Bai, Rong Bai, Chao Wang, and Hai Bing Ma. "Research and Benefit Analysis on Exterior Mesh Construction Technology of Super Cross-Section CFST Cylinder." Advanced Materials Research 671-674 (March 2013): 2011–15. http://dx.doi.org/10.4028/www.scientific.net/amr.671-674.2011.

Повний текст джерела

Анотація:

Based on the project on F2-4 plot of Pearl River New Town in Guangzhou City, manual plastering protective layer construction technology of exterior mesh for super cross-section CFST cylinder is fully studied in this paper, the proposed new technologies of outer tube mesh and dry mesh are qualified with fast construction, energy conservation and environmental protection, low cost for later maintenance and so on. The new technology has good prospects for development and can be promoted widely.

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Liao Dun-Wei, Zhou Jian-Hua, and Zheng Yue-Jun. "Preparation and performance of double-layer metal mesh transparent conductive films based on crack template method." Acta Physica Sinica 74, no. 1 (2025): 0. http://dx.doi.org/10.7498/aps.74.20241305.

Повний текст джерела

Анотація:

In order to improve the electromagnetic shielding performance of the single-layer metal mesh transparent conductive films (SMMTCF) based on the crack template method, the double-layer metal mesh transparent conductive films (DMMTCF) preparation based on the crack template method were studied. The preparation of double-layer cracked templates were done by spin-coating crack glue on both sides of the transparent substrate and by pulling the transparent substrate from the cracked adhesive solution with a certain rate to obtain the corresponding double-layer cracked templates, respectively. After

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Tan, Xiao Long, Jia Zhou, and Wen Bin Wang. "Analysis of Wireless Mesh Network Routing." Advanced Materials Research 989-994 (July 2014): 4629–32. http://dx.doi.org/10.4028/www.scientific.net/amr.989-994.4629.

Повний текст джерела

Анотація:

Since the wireless mesh network topology dynamics and the radio channels instable, the design of wireless mesh network routing protocol become one of the key factors to determine the performance. This paper mainly studied the existing several kinds of typical three-layer mesh network routing protocol (DSDV and AODV), aimed at the defects of three-layer routing limited to the network topology changes, the paper proposed a network model based on two-layer routing. Forwarding the packet, establishing and maintaining the communication links are accomplished on the Mac layer. Simulation tests showe

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Choi, Seon Young, Hyun Joo Kim, Soyoung Hwang та ін. "The Modulation of Respiratory Epithelial Cell Differentiation by the Thickness of an Electrospun Poly-ε-Carprolactone Mesh Mimicking the Basement Membrane". International Journal of Molecular Sciences 25, № 12 (2024): 6650. http://dx.doi.org/10.3390/ijms25126650.

Повний текст джерела

Анотація:

The topology of the basement membrane (BM) affects cell physiology and pathology, and BM thickening is associated with various chronic lung diseases. In addition, the topology of commercially available poly (ethylene terephthalate) (PET) membranes, which are used in preclinical in vitro models, differs from that of the human BM, which has a fibrous and elastic structure. In this study, we verified the effect of BM thickness on the differentiation of normal human bronchial epithelial (NHBE) cells. To evaluate whether the thickness of poly-ε-carprolactone (PCL) mesh affects the differentiation o

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Fry, Alastair, and Graham Colver. "Mesh advancement of the galeal layer." British Journal of Oral and Maxillofacial Surgery 52, no. 8 (2014): e105. http://dx.doi.org/10.1016/j.bjoms.2014.07.188.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

de Paulo, Vitor, and Cristinel Ababei. "3D Network-on-Chip Architectures Using Homogeneous Meshes and Heterogeneous Floorplans." International Journal of Reconfigurable Computing 2010 (2010): 1–12. http://dx.doi.org/10.1155/2010/603059.

Повний текст джерела

Анотація:

We propose new 3D 2-layer and 3-layer NoC architectures that utilizehomogeneousregular mesh networks on a separate layer and one or twoheterogeneousfloorplanning layers. These architectures combine the benefits of compact heterogeneous floorplans and of regular mesh networks. To demonstrate these benefits, a design methodology that integrates floorplanning, routers assignment, and cycle-accurate NoC simulation is proposed. The implementation of the NoC on a separate layer offers an additional area that may be utilized to improve the network performance by increasing the number of virtual chann

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kim, P. J., J. K. Lee, CH Lee, et al. "Tailoring catalyst layer interface with titanium mesh porous transport layers." Electrochimica Acta 373 (March 2021): 137879. http://dx.doi.org/10.1016/j.electacta.2021.137879.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Hwang, Tae Woo, Young Yun Woo, Sang Wook Han, and Young Hoon Moon. "Fabrication of Mesh Patterns Using a Selective Laser-Melting Process." Applied Sciences 9, no. 9 (2019): 1922. http://dx.doi.org/10.3390/app9091922.

Повний текст джерела

Анотація:

The selective laser-melting (SLM) process can be applied to the additive building of complex metal parts using melting metal powder with laser scanning. A metal mesh is a common type of metal screen consisting of parallel rows and intersecting columns. It is widely used in the agricultural, industrial, transportation, and machine protection sectors. This study investigated the fabrication of parts containing a mesh pattern from the SLM of AISI 304 stainless steel powder. The formation of a mesh pattern has a strong potential to increase the functionality and cost-effectiveness of the SLM proce

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Hamadi, Farida, El Hachemi Amara, Djamila Bennaceur-Doumaz, et al. "Modeling of Titanium Oxide Layer Growth Produced by Fiber Laser Beam." Defect and Diffusion Forum 336 (March 2013): 11–18. http://dx.doi.org/10.4028/www.scientific.net/ddf.336.11.

Повний текст джерела

Анотація:

In this paper, we study the oxidation process during the heating of a titanium metallic surface by a Nd-YAG fiber pulsed laser beam under air environment. For this, we adopted an approach that considers a three-dimensional heat diffusion model coupled with an oxidation parabolic law (oxidation kinetics). The heat diffusion equation solved numerically, gives the temperature field. The oxide film growth is simulated by implementing a dynamic mesh technique. We developed computational procedures UDFs (User Defined Function) running interactively with the Fluent fluid dynamics software [ that impl

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Kwak, Seung-Hoon, Min-Gi Kwak, Byeong-Kwon Ju, and Sung-Jei Hong. "Enhancement of Characteristics of a Touch Sensor by Controlling the Multi-Layer Architecture of a Low-Cost Metal Mesh Pattern." Journal of Nanoscience and Nanotechnology 15, no. 10 (2015): 7645–51. http://dx.doi.org/10.1166/jnn.2015.11213.

Повний текст джерела

Анотація:

In this study, the characteristics of a metal mesh touch sensor were enhanced by optimizing the multi-layer architecture of the metal mesh pattern. Low-cost metal such as an aluminum (Al) layer was mainly applied to the architectures for practical applications in touch screen panel (TSP) industries. As well, molybdenum (Mo) was added to the architectures in order to minimize the drawbacks of Al. Three types of Mo/Al, Al/Mo and Mo/Al/Mo layers were fabricated by DC sputtering. The thickness of the Al and Mo layer was optimized at 150 and 30 nm, respectively. Low sheet resistance below 0.27 Ω/□

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Parpiyev, Umidjon Meliyevich, Chinnigul Abdusalom qizi Xushnazarova, Abdulaziz Abdulhakim o'g'li Ikromov, and Muxammadrasul Azimjon o'g'li Sobirov. "Utilization of the structure, chemical composition, and physical-mechanical properties of natural leather produced from animal hides." Multidisciplinary Journal of Science and Technology 5, no. 5 (2025): 383–85. https://doi.org/10.5281/zenodo.15383017.

Повний текст джерела

Анотація:

In this article, skin diseases and the structure of the skin before animal skinning in our country, lining and base materials, the main indicators of the structure of the mesh layer of the skin, the angle of inclination of the fiber bundles to the horizontal, the compactness of their laying, the degree and thickness of the separation of the bundles into fibers and fibers, fiber the angle of inclination of the bundles reveals the importance of the dominant direction of the location of most of the bundles of fibers in the reticular layer.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Liao, Yu, Shaoqing Shi, Zhaohui Liu, and Caoke Liang. "Study on shock resistance of steel plate reinforced with polyurea–woven fiberglass mesh composite under shock wave." International Journal of Protective Structures 9, no. 2 (2018): 248–66. http://dx.doi.org/10.1177/2041419618755159.

Повний текст джерела

Анотація:

To study the dynamic mechanical properties of polyurea–woven fiberglass mesh composite material as a reinforcing layer, the shock resistance tests on plain steel plate, polyurea-reinforced steel plate, and polyurea–woven fiberglass mesh composite–reinforced steel plate were carried out using the large shock tube device. Finite element method simulation was also carried out. The results of experimental and numerical simulation show that the deformation of polyurea–woven fiberglass mesh composite reinforcing layer is smaller than that of pure polyurea reinforcing layer, and the overall deformati

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Zhang, Xiaoning, Feng Shen, Li Wang, Sheng Wang, Lemin Li, and Hongbin Luo. "Two-layer mesh network optimization based on inter-layer decomposition." Photonic Network Communications 21, no. 3 (2010): 310–20. http://dx.doi.org/10.1007/s11107-010-0301-z.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Li, Xiaobin, Hongwei Xie, Meng Yan, Hongye Gou, Gangyun Zhao, and Yi Bao. "Eccentric Compressive Behavior of Reinforced Concrete Columns Strengthened Using Steel Mesh Reinforced Resin Concrete." Applied Sciences 8, no. 10 (2018): 1827. http://dx.doi.org/10.3390/app8101827.

Повний текст джерела

Анотація:

Rapid strengthening is focused on recently to reduce the time for reinforcement process and decrease the losses. However, there are some limits for the existing reinforcement technologies to be used for rapid strengthening. The paper reports an experimental investigation on eccentric compressive behavior of reinforced concrete columns that are strengthened using steel mesh reinforced resin concrete (SMRC) for rapid strengthening. Four reinforced concrete columns with 180 mm × 250 mm test cross section and 1000 mm test height were fabricated and tested under large eccentric compressive load. Am

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Wang, Zhaowei, Tailiang Yong, and Xiangjin Song. "Fast and Low-Overhead Time Synchronization for Industrial Wireless Sensor Networks with Mesh-Star Architecture." Sensors 23, no. 8 (2023): 3792. http://dx.doi.org/10.3390/s23083792.

Повний текст джерела

Анотація:

Low-overhead, robust, and fast-convergent time synchronization is important for resource-constrained large-scale industrial wireless sensor networks (IWSNs). The consensus-based time synchronization method with strong robustness has been paid more attention in wireless sensor networks. However, high communication overhead and slow convergence speed are inherent drawbacks for consensus time synchronization due to inefficient frequent iterations. In this paper, a novel time synchronization algorithm for IWSNs with a mesh–star architecture is proposed, namely, fast and low-overhead time synchroni

Стилі APA, Harvard, Vancouver, ISO та ін.

25

He, Yuan Chao, Wen Lin Chen, and Li Na Hao. "Topological Optimization for Damping Structure of Cylindrical Shell Based on DIMFM." Applied Mechanics and Materials 472 (January 2014): 152–56. http://dx.doi.org/10.4028/www.scientific.net/amm.472.152.

Повний текст джерела

Анотація:

On the basis of evolutionary structural optimization, the topology optimization for free layer damping cylindrical shell was studied. The checkerboard pattern problem caused by evolutionary structural optimization was solved by discrete independent mesh filter method. The programs of evolutionary structural optimization and discrete independent mesh filter method were made in ANSYS. The optimal topology configuration of free layer damping cylindrical shell was obtained and the effectiveness of Discrete Independent Mesh Filter Method was validated.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Moch., Dhofir, Nur Hasanah Rini, Suyono Hadi, and Riva Belan Avrizal. "Alternative Grounding Method Using Coconut Shell Charcoal as Media of Mesh Electrodes." TELKOMNIKA Telecommunication, Computing, Electronics and Control 16, no. 2 (2018): 488–94. https://doi.org/10.12928/TELKOMNIKA.v16i2.8700.

Повний текст джерела

Анотація:

The utilization of coconut charcoal as alternative media of grounding was investigated. The mesh-electrode was made of stainless steel of 8-mm diameter, whereas its lattice dimension was 50cmx50cm. Four variations of lattice number were considered, i.e. 1-, 2-, and 4-lattice structures. Dry and wet charcoal media were considered. Mesh location was fixed in the depth of 80cm under the ground, while the 10cm of medium thickness variation was chosen. The resistance obtained using 10-cm thickness of charcoal layer in a mesh consisting of 1-, 2-, and 4-lattices were 268, 131, and 78 ohms consecutiv

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Bao, Yi Dong, Yang Sang, and Hou Min Wang. "Accurate Prediction Approach of 3D Trimming Line for Auto Panel Part." Key Engineering Materials 535-536 (January 2013): 235–38. http://dx.doi.org/10.4028/www.scientific.net/kem.535-536.235.

Повний текст джерела

Анотація:

It is difficult to obtain 3D trimming line using traditional prediction methods for auto panel parts. An initial geometrical development method with element layer is proposed based on one step inverse analysis theory for this problem. The flange mesh can be unfold onto the die surface layer by layer according to nodal adjacent element relation, then the above development mesh is smoothed by mesh smoothing method with sliding constraint surface in order to delete overlap and distorted mesh, the 3D initial mesh can be obtained for one step inverse analysis method. The accurate 3D trimming line o

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Kubalak, Gary. "Mesh Repair for Midline Ventral Hernia Without Lateral Fixation of the Mesh." American Surgeon 77, no. 6 (2011): 743–46. http://dx.doi.org/10.1177/000313481107700631.

Повний текст джерела

Анотація:

The Rives-Stoppa repair is the current standard of care for the open treatment of midline ventral hernia. Transfascial, lateral fixation of the mesh has always been considered an important part of this technique. I reviewed cases of patients with a primary or recurrent midline, ventral hernia who had an open repair using the Rives-Stoppa technique with the exception of mesh fixation. Heavy weight polypropylene mesh was sutured to the midline of the posterior rectus sheath with two to three interrupted stitches. Multiple metal clips were attached to the periphery of the mesh for later identific

Стилі APA, Harvard, Vancouver, ISO та ін.

29

KHALIL, S. SHAIKH, and P.B. AUTADE PROF. "EFFECT OF GEOPOLYMER MORTAR IN FERROCEMENT FOR VARIATION IN MESH SIZE AND NUMBER OF LAYERS." JournalNX - A Multidisciplinary Peer Reviewed Journal 2, no. 12 (2017): 82–87. https://doi.org/10.5281/zenodo.1466825.

Повний текст джерела

Анотація:

Globally, the worlds Portland cement production contributes about 1.6 billion tons of CO2 or about 7% of global loading of CO2 into the atmosphere. The manufacture of Portland cement releases Carbon dioxide that is significant contributor of Green house gas emissions to the atmosphere. Geopolymer is more eco friendly material and a strong alternative to Portland cement. Geopolymer mortar can be used in Ferro cement instead of other conventional materials like cement mortar. Ferro cement is a composite material formed by closely spaced wire mesh which uses wire meshes as reinforcement. Ferrocem

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Al-Anzi, F. S., and S. Khan. "WIRELESS MESH NETWORK CROSS-LAYER INTRUSION DETECTION." Journal of Computer Science 10, no. 12 (2014): 2366–73. http://dx.doi.org/10.3844/jcssp.2014.2366.2373.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Kose, Selçuk, and Eby G. Friedman. "Effective Resistance of a Two Layer Mesh." IEEE Transactions on Circuits and Systems II: Express Briefs 58, no. 11 (2011): 739–43. http://dx.doi.org/10.1109/tcsii.2011.2168016.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Akyildiz, I. F., and Xudong Wang. "Cross-Layer Design in Wireless Mesh Networks." IEEE Transactions on Vehicular Technology 57, no. 2 (2008): 1061–76. http://dx.doi.org/10.1109/tvt.2007.911615.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Aubry, R., S. Dey, E. L. Mestreau, and B. K. Karamete. "Boundary layer mesh generation on arbitrary geometries." International Journal for Numerical Methods in Engineering 112, no. 2 (2017): 157–73. http://dx.doi.org/10.1002/nme.5514.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Phani Kumar, P., A. C. Mandal, and J. Dey. "Effect of a mesh on boundary layer transitions induced by free-stream turbulence and an isolated roughness element." Journal of Fluid Mechanics 772 (May 7, 2015): 445–77. http://dx.doi.org/10.1017/jfm.2015.203.

Повний текст джерела

Анотація:

Streamwise streaks, their lift-up and streak instability are integral to the bypass transition process. An experimental study has been carried out to find the effect of a mesh placed normal to the flow and at different wall-normal locations in the late stages of two transitional flows induced by free-stream turbulence (FST) and an isolated roughness element. The mesh causes an approximately 30 % reduction in the free-stream velocity, and mild acceleration, irrespective of its wall-normal location. Interestingly, when located near the wall, the mesh suppresses several transitional events leadin

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Lewandowska, Natalia, and Jędrzej Mosiężny. "Meshing strategy for bifurcation arteries in the context of blood flow simulation accuracy." E3S Web of Conferences 128 (2019): 02003. http://dx.doi.org/10.1051/e3sconf/201912802003.

Повний текст джерела

Анотація:

The study presents a mesh dependency study for a carotid artery bifurcation geometry of a real-life specimen. The results of time-averaged velocity profiles at artery control surfaces and wall shear stresses are compared between a set of structured and unstructured meshes, with varying non–dimensional boundary layer first element thickness (y+) parameter. A set of four meshes in total is considered: a full–hexagonal structured mesh, an unstructured tetrahedral mesh with prism inflation layer, both created for y+=1 and y+=30. Apart from numerical results, overall mesh creation work time, overal

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Ennan, A. A., M. V. Oprya, S. A. Kiro, and V. I. Vishnyakov. "On new possibilities of the welding fume electrostatic trapping." Physics of Aerodisperse Systems, no. 54 (December 14, 2017): 122–28. http://dx.doi.org/10.18524/0367-1631.2017.54.133154.

Повний текст джерела

Анотація:

Charged welding fume particles electrostatic precipitation on the mesh electrode, which is located perpendicular to the gas-air mixture flow, is studied. The formation of the welding fume particles autofiltering layer on the mesh electrode and the influence of the induced electric field direction on the layer pressure drop are demonstrated.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Ulaşan, Hilal, Agron Bajraktari, Nihat Döngel, Hasan Özgür Imirzi, and Cevdet Söğütlü. "Modulus of Elasticity and Flexural Behavior of Glulam Beams Reinforced with Steel Mesh in Different Mesh Openings." Materials 16, no. 12 (2023): 4307. http://dx.doi.org/10.3390/ma16124307.

Повний текст джерела

Анотація:

In this study, the modulus of elasticity and flexural strength properties of laminated wood elements reinforced with steel mesh with different mesh openings were determined. In accordance with the purpose of the study, three- and five-layer laminated elements were produced from scotch pine (Pinus sylvestris L.) wood material, which is widely used in the wood construction industry in Türkiye. The 50, 70, and 90 mesh steel used as the support layer was placed between each lamella and pressed with polyvinylacetate (PVAc-D4) and polyurethane (PUR-D4) adhesives. Afterward, the prepared test samples

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Li, Dongdong, Yuan Wang, Xuan Cui, and Jingqi Huang. "Effect of Self-Filtering Layer on Tailings–Steel Wire Mesh Interfacial Shearing Properties and Bearing Behavior of Drain Pipes." Buildings 14, no. 8 (2024): 2554. http://dx.doi.org/10.3390/buildings14082554.

Повний текст джерела

Анотація:

The drain pipe wrapped in steel wire mesh serves a dual purpose of drainage and reinforcement in tailings pond projects. The self-filtering layer that develops upstream of the steel wire mesh influences the reinforcement characteristics of the drainage pipe. This study first conducts interfacial shearing experiments to explore the impact of the self-filtering layer on the shearing properties between tailings and the steel wire mesh. An exponential interface constitutive model is then proposed to delineate the shear stress–displacement relationship. Finally, through finite element simulations,

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Wu, Yirong, and Heyu Wang. "Moving Mesh Finite Element Method for Unsteady Navier-Stokes Flow." Advances in Applied Mathematics and Mechanics 9, no. 3 (2017): 742–56. http://dx.doi.org/10.4208/aamm.2016.m1457.

Повний текст джерела

Анотація:

AbstractIn this paper, we use moving mesh finite element method based upon 4P1–P1 element to solve the time-dependent Navier-Stokes equations in 2D. Two-layer nested meshes are used including velocity mesh and pressure mesh, and velocity mesh can be obtained by globally refining pressure mesh. We use hierarchy geometry tree to store the nested meshes. This data structure make convienence for adaptive mesh method and the construction of multigrid preconditioning. Several numerical problems are used to show the effect of moving mesh.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Liu, Jun, Wanxia He, Peng Li, et al. "Synthesis of graphene oxide–SiO2 coated mesh film and its properties on oil–water separation and antibacterial activity." Water Science and Technology 73, no. 5 (2015): 1098–103. http://dx.doi.org/10.2166/wst.2015.584.

Повний текст джерела

Анотація:

Oil–water separation has recently become a worldwide challenge due to the frequent occurrence of oil spill accidents and increasing industrial oily wastewater. In this work, the multifunctional mesh films with underwater oleophobicity and certain bacteriostatic effects are prepared by layer-by-layer assembly of graphene oxide-silica coatings on stainless steel mesh. The mesh film exhibits excellent environmental stability under a series of harsh conditions. The new, facile and reusable separation system is proposed to achieve deep treatment of oily wastewater, and the oil collection rate can r

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Li, Ziqi, Weitao Liang, Weiping Li, et al. "Facile fabrication of a Janus mesh for water fluid unidirectional transportation." RSC Advances 11, no. 2 (2021): 1001–11. http://dx.doi.org/10.1039/d0ra08632k.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Ren, Xiaofen, and Qidong Chen. "Study on internal structure optimization of drying Chamber of Sludge drying equipment." E3S Web of Conferences 356 (2022): 02029. http://dx.doi.org/10.1051/e3sconf/202235602029.

Повний текст джерела

Анотація:

Aiming at the problem of uneven distribution of velocity field in the drying chamber of JKFF series low-temperature closed cycle sludge drying equipment, the influence of internal structure change of drying chamber on air distribution was studied by numerical simulation. Fluent software is used for simulation, through the analysis of three factors affecting the internal structure of the oven, such as the position of the blower, the spacing of the mesh belt layer and the size of the aperture of the nylon mesh belt. The results show that it is better to put the air blower inside the heat pump th

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Birbilis, Th, E. Theodoropoulou, Ag Birbili, S. Dimas, and V. Leutsakos. "A Preliminary Report on the Use of Relon Mesh in the Repair of Eventrations with Large Parietal Defects. An Experimental Study in Rats." Journal of International Medical Research 25, no. 3 (1997): 135–40. http://dx.doi.org/10.1177/030006059702500303.

Повний текст джерела

Анотація:

This experimental study in rats was designed to investigate the tolerability and the mode of healing when commercial relon mesh is used in the repair of large abdominal-wall defects. A defect was created to simulate anatomical derangement of the abdominal wall and a surgical correction was performed using relon mesh. The mesh was implanted intraperitoneally in 18 Wistar albino rats. The animals were killed under anaesthesia 4, 6, 8, 12, 15 or 30 days later and the intra-abdominal viscera were examined macroscopically for adhesions and other evidence of inflammatory reactions. Skin healing usua

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Rozenfeld, I. I., та D. L. Chilikina. "Comparison of the Effectiveness of "Оnlay" Plastics of Large and Giant Hernias of The Esophageal Aperture of the Diaphragm with a Polypropylene Mesh Implant and a Biocarbon Double-Layer Mesh Implant". Medicina 9, № 1 (2021): 93–102. http://dx.doi.org/10.29234/2308-9113-2021-9-1-93-102.

Повний текст джерела

Анотація:

This article is a continuation of a series of studies on the optimization of techniques and methods of surgical operations for hernias of the esophageal aperture of the diaphragm and is based on the use of the author’s development of a model of a two-layer biocarbon mesh implant. The purpose of this study is to highlight the immediate and long-term results of using a double-layer biocarbon mesh implant in comparison with the standard method of using a polypropylene implant when operating patients with large and giant hiatal hernia. All patients were split into 2 research groups that underwent

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Yang, Qi, Jie Dong, Tongju Xing, et al. "RANS-Based Modelling of Turbulent Flow in Submarine Pipe Bends: Effect of Computational Mesh and Turbulence Modelling." Journal of Marine Science and Engineering 11, no. 2 (2023): 336. http://dx.doi.org/10.3390/jmse11020336.

Повний текст джерела

Анотація:

Pipe bend is a critical integral component, widely used in slurry pipeline systems involving various engineering applications, including natural gas hydrate production. The aim of this study is to assess the capability of RANS-based CFD models to capture the main features of the turbulent single-phase flow in pipe bends, in view of the future investigation of the hydrate slurry flow in the same geometry. This is different from the available literature in which only a few accounted for the effects of a combination of computational mesh, turbulence model, and near-wall treatment approach. In thi

Стилі APA, Harvard, Vancouver, ISO та ін.

46

YAO, JIANHUA, and RUSSELL TAYLOR. "NON-RIGID REGISTRATION AND CORRESPONDENCE FINDING IN MEDICAL IMAGE ANALYSIS USING MULTIPLE-LAYER FLEXIBLE MESH TEMPLATE MATCHING." International Journal of Pattern Recognition and Artificial Intelligence 17, no. 07 (2003): 1145–65. http://dx.doi.org/10.1142/s0218001403002873.

Повний текст джерела

Анотація:

In this paper we present a novel technique for non-rigid medical image registration and correspondence finding based on a multiple-layer flexible mesh template matching technique. A statistical anatomical model is built in the form of a tetrahedral mesh, which incorporates both shape and density properties of the anatomical structure. After the affine transformation and global deformation of the model are computed by optimizing an energy function, a multiple-layer flexible mesh template matching is applied to find the vertex correspondence and achieve local deformation. The multiple-layer stru

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Darshan, G. Gaidhankar, Omid Naqshbandi Mohammad, and S. Kulkarni Mrudula. "Impact Strength of Ferrocement Panel under Low Velocity Impact Loading." International Journal of Engineering and Advanced Technology (IJEAT) 10, no. 5 (2021): 285–91. https://doi.org/10.35940/ijeat.E2677.0610521.

Повний текст джерела

Анотація:

The capability to absorb energy, often called as toughness, is of importance in actual service conditions of mesh reinforced composites, when they may be subjected to static, dynamic and fatigue loads. Toughness evaluated under impact loads is the impact strength. The toughness of materials are determined by two methods, (i) by measuring deformation under impact load, (ii) by determining energy adsorption capacity of materials under impact load. Several methods were used to investigate to determining toughness of materials. In this research work, drop weight impact test were used. The present

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Kao, Katherine, Collin Chen, Jennifer Gross, et al. "Titanium Mesh Nasal Repair without Nasal Lining." Facial Plastic Surgery 33, no. 01 (2017): 052–57. http://dx.doi.org/10.1055/s-0036-1593747.

Повний текст джерела

Анотація:

AbstractThe objective of this study was to describe outcomes for patients who underwent titanium mesh reconstruction of full-thickness nasal defects without internal lining repair. This is a retrospective cohort study. Patients with through-and-through nasal defects were identified at a single academic institution between 2008 and 2016. Nasal reconstruction was performed with either titanium mesh and external skin reconstruction without repair of the intranasal lining or traditional three-layer closure. Five patients underwent titanium mesh reconstruction and 11 underwent traditional three-lay

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Kim, MyoJin, MiJi Yeo, Minseong Kim, and GeunHyung Kim. "Biomimetic cellulose/calcium-deficient-hydroxyapatite composite scaffolds fabricated using an electric field for bone tissue engineering." RSC Advances 8, no. 37 (2018): 20637–47. http://dx.doi.org/10.1039/c8ra03657h.

Повний текст джерела

Анотація:

The fabricated ceramic scaffold showed a layer-by-layered mesh structure entangled with cellulose micro/nanofibers and the bioceramic phase. By varying processing parameters, the unique 3D fibrous mesh-structure could be achieved.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Shyagali, Tarulatha R., Deepak P. Bhayya, Chandralekha B. Urs, and Shashikala Subramaniam. "Finite element study on modification of bracket base and its effects on bond strength." Dental Press Journal of Orthodontics 20, no. 2 (2015): 76–82. http://dx.doi.org/10.1590/2176-9451.20.2.076-082.oar.

Повний текст джерела

Анотація:

OBJECTIVE: This article aims to analyze the difference in stresses generated in the bracket-cement-tooth system by means of a peel load in single and double-mesh bracket bases using a three-dimensional finite element computer model. MATERIAL AND METHODS: A three-dimensional finite element model of the bracket-cement-tooth system was constructed and consisted of 40,536 bonds and 49,201 finite elements using a commercial mesh generating programmer (ANSYS 7.0). Both single and double-mesh bracket bases were modified by varying the diameter from 100-400 µm progressively, and the spacing between th

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!