Увійти

Готові списки джерел за темами / Method of main components / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Method of main components.

Статті в журналах з теми "Method of main components"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Method of main components".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Yan, Wen Bing, Hong Xia Pan, and Shao Zhong Jiang. "Dynamic Properties of Engine Main Components." Advanced Materials Research 455-456 (January 2012): 1454–58. http://dx.doi.org/10.4028/www.scientific.net/amr.455-456.1454.

Повний текст джерела

Анотація:

Based on the combination of modal analysis technology and finite element method (FEM), the modal parameters identification of the main parts of a diesel engine (crankshaft ,connecting rod and oil pan) were tested using hammer beat method and calculated by means of I-DEAS software. The natural frequency and shake mode parameters of the parts were identified. The results could provide basis for structure dynamic analysis and control of noise of the diesel engine.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Kalyuzhnyi, Alexander Ya, and Leonid G. Krasny. "Method of the main informative components for acoustic tomography." Journal of the Acoustical Society of America 105, no. 2 (1999): 1178. http://dx.doi.org/10.1121/1.425573.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Şahinler, S., and M. Görgülü. "Estimation of main carcass components by using bootstrapping regression method." Journal of Animal and Feed Sciences 12, no. 4 (2003): 723–37. http://dx.doi.org/10.22358/jafs/67766/2003.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zhosan, Oleksandr. "BEARINGLESS ROTOR SYSTEM MAIN COMPONENTS DESIGNING." Problems of Friction and Wear, no. 1(102) (March 30, 2024): 40–51. http://dx.doi.org/10.18372/0370-2197.1(102).18416.

Повний текст джерела

Анотація:

Bearingless rotor system design optimizes mechanical simplicity, eliminates frictional losses typical of conventional bearing systems, and improves the overall efficiency of the rotor system. Based on the findings of the research, it is possible to determine that composite materials can be applied in order to improve the performance of the rotorcraft rotor system.A theoretical analysis of the influence of input parameters on the aerodynamic quality of the main rotor of a rotorcraft was carried out. The strength and aerodynamic quality of the designed parts were calculated using the finite elem

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ivashova, V. A., G. V. Tokareva, I. V. Yuschenko, V. N. Morozova, S. N. Kosnikov, and Yu A. Pichugin. "Method of the main components in comparative analysis of job satisfaction." Journal of Physics: Conference Series 1661 (November 2020): 012043. http://dx.doi.org/10.1088/1742-6596/1661/1/012043.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Meiyanti, Ruci, Dana Indra Sensuse, and Yudho Giri Sucahyo. "The Main Component of Smart Tourism: A Principal Component Analysis Approach." Webology 18, no. 2 (2021): 295–307. http://dx.doi.org/10.14704/web/v18i2/web18322.

Повний текст джерела

Анотація:

Introduction. The establishment of a smart tourism model is indispensable for the effectiveness of tourism development and management supported by advances in information and communication technology. The successful implementation of smart tourism is determined by the smart tourism model. Determination of the main components has a significant role in building an effective model. The purpose of this study, to determine the main components forming a smart tourism model using Principal Component Analysis (PCA). PCA is used to compress variables by reducing the number of dimensions, without losing

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Xia, Hong Liang. "Power Plant Boiler Failure Analysis of Main Components." Advanced Materials Research 945-949 (June 2014): 1073–76. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.1073.

Повний текст джерела

Анотація:

This paper briefly introduces the basic condition of power station boiler operation and failure analysis of the necessity of power plant boiler failure types and main components of power plant boiler failure types of main components. Illustrates the failure analysis of the main analysis method, and introduces the failure analysis of the role of failure analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Прядко, И. П., and С. А. Мудрак. "Food security and its main components." Экономика и предпринимательство, no. 10(123) (November 15, 2020): 1097–105. http://dx.doi.org/10.34925/eip.2020.123.10.218.

Повний текст джерела

Анотація:

Целью настоящей работы выступает анализ состояния российского агрокомплекса в начале XXI в. - в период экономических санкций и падения промышленного производства, этими санкциями вызванного. Чтобы определить вектор развития российского Агропрома, а вместе с ним и социального развития российского села, авторы обращаются к истории русского села в XIX-XX вв., к фактам непростых отношений между традиционным крестьянским миром и индустриальной цивилизацией, промышленным городом. Для достижения целей исследования авторами используется метод ретроспективного анализа источников, анализируются данные с

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Nechitailov, A. P., A. G. Suss, T. I. Zhilina, and E. A. Belanova. "New method of analyzing bauxites to determine their main components and impurities." Metallurgist 52, no. 11-12 (2008): 625–32. http://dx.doi.org/10.1007/s11015-009-9104-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

BEZVESILNA, Olena, Svitlana KOTLIAR, Serhii NECHAY, and Mikola ILCENKO. "RESULTS OF EXPERIMENTAL RESEARCH OF THE MAIN COMPONENTS OF AUTOMATED INSTRUMENT SYSTEM STABILIZATION." Herald of Khmelnytskyi National University. Technical sciences 311, no. 4 (2022): 46–50. http://dx.doi.org/10.31891/2307-5732-2022-311-4-46-50.

Повний текст джерела

Анотація:

This article presents the methodology and results of scientists conducted by the Department of Automation and Non-Destructive Testing Systems (ASNK) KPI. Igor Sikorsky and PJSC “RPA “Kyiv Automatic Plant”(KZA) experimental studies of the main components of the stabilizer of light armored vehicles (LAV). The purpose of experimental research is to measure on each of the motors of the stabilization system (SS) EDM20M, EDM02, EDM20 electromagnetic (τEL. MAGN.) And electromechanical time constants (τEL. MEX). Testing of engines according to the assessment of τEL. MAGN. were carried out as part of a

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Liu, Xiao Chao, Da Zheng Wang, Lei Mei, and Qiang Ma. "Equivalent Research on Main Components of FRP Fishing Boat." Materials Science Forum 1001 (July 2020): 121–26. http://dx.doi.org/10.4028/www.scientific.net/msf.1001.121.

Повний текст джерела

Анотація:

Fiberglass reinforced plastic fishing boats is a new type of energy saving and emission reduction boats, which is a significant revolution of fishing craft. However, the design of FRP fishing vessels in China continue to use the similar method employed by steel fishing vessels, which ignores the designability of fiberglass, leading to the light and high strength characteristic of glass fiber buried. the typical structure of FRP boats were analyzed, including the study on the influence of core material on the mechanical properties of cap type girder and the feasibility by using the equal sectio

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Хромушин, Viktor Khromushin, Хромушин, and Oleg Khromushin. "The programm for highlighting the main components resulting in the algebraic model of constructive logic." Journal of New Medical Technologies. eJournal 8, no. 1 (2014): 1–5. http://dx.doi.org/10.12737/5612.

Повний текст джерела

Анотація:

The article presents the program to determine the principal components resulting in the algebraic model of constructive logic, which is designed for construction multivariate nonlinear mathematical models. The resulting mathematical model is represented by a set of resulting components as factors indicating the detection limits, combined mark of conjunction (indicating joint impact). Each resulting component is characterized by power, which is the essence of the number of rows in the table that match the specified detection limits factors in their joint action. The program provides two methods

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Nadjafi, Mohammad. "Improved Reliable Deep Face Recognition Method Using Separated Components." Brilliant Engineering 3, no. 3 (2022): 1–7. http://dx.doi.org/10.36937/ben.2022.4563.

Повний текст джерела

Анотація:

Face recognition is used as one of the most successful biometric methods due to the availability of advanced resources such as faster processors and higher memory and providing intelligent methods based on the power of these resources. Nevertheless, there are still many challenges in this area. The face plays an important role in the transmission of emotions and carries the characteristics hidden in it, the identity of individuals. Face recognition has been added to some control devices, security, welfare, criminal identification, and many other areas, which is the main motivation for research

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kobylinska, N. "SIMULTANEOUS IDENTIFICATION, QUANTIFICATION, AND ANALYSIS OF MAIN COMPONENTS OF “HAIRY” ROOT EXTRACTS OF Artemisia annua AND Artemisia tilesii PLANTS." Biotechnologia Acta 14, no. 6 (2021): 60–70. http://dx.doi.org/10.15407/biotech14.06.060.

Повний текст джерела

Анотація:

Aim. The profiles of polyphenolic phytochemicals in extracts of “hairy” roots of Artemisia tilesii Ledeb. and Artemisia annua L. were studied. Analytical separation and quantification of main components in extracts were evaluated. Methods. “hairy” roots were grown in vitro on Murashige and Skoog medium. High-performance chromatography coupled with different types of detection (photo diode array detection (DAD) and electrospray ionization with ultra-high resolution Qq-Time-of-Flight mass spectrometry) was used to identify and quantify the main biologically active components in ethanol extracts

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Wang, Lei, Fa Ming Wu, Xing Mei Lv, and Dian Wang. "A Fatigue Analysis Method Research for Main Frame of the Large-Scale Wind Turbine." Applied Mechanics and Materials 226-228 (November 2012): 995–99. http://dx.doi.org/10.4028/www.scientific.net/amm.226-228.995.

Повний текст джерела

Анотація:

This paper presents a method to calculate the main frame damage of fatigue directly by the equivalent fatigue load of the wind turbine. This method can take advantage of the equivalent fatigue load to check the damage of the main frame fast. This paper also analyses the weight of each components of the fatigue load, which is convenient for the optimization design of the structure for main frame. Comparing this method with traditional fatigue calculation method, we can find this method is reasonable and veracious. Using this method can greatly improve the efficiency of the damage estimate for t

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Dovzhenko, I. V., A. L. Yavorsky, and I. A. Pastarnak. "VIDEODESIGN PRODUCTION: DEFINITIONS, STAGES AND MAIN COMPONENTS." Art and Design, no. 3 (December 13, 2021): 54–62. http://dx.doi.org/10.30857/2617-0272.2021.3.5.

Повний текст джерела

Анотація:

The purpose of the study is to define the characteristics of the concept of "videodesign production", to analyze the stages of videodesign production and identify their main components. Methodology. The research uses methods of analysis, synthesis, identification, formalization and systematization, which allow us to consider the videodesign production and its stages as hierarchically subordinate integrity. Results. The research of production through the prism of film, video production, cinematographic activity, film production is carried out. The definition of the term "videodesign production"

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Wang, Ya Ping, H. R. Shi, L. Gao, Z. Wang, X. Y. Jia, and G. Yang. "Research on the Optimal Design Method of the Main Components for the Wheelchair Pickup." Advanced Materials Research 791-793 (September 2013): 799–802. http://dx.doi.org/10.4028/www.scientific.net/amr.791-793.799.

Повний текст джерела

Анотація:

With the increasing of the aging of population all over the world, and With the inconvenience coming from diseases and damage, there will be more and more people using the wheelchair as a tool for transport. When it cant be short of the wheelchair in the daily life, the addition of the function will bring the elevation of the quality of life for the unfortunate. Staring with this purpose, the research designs a pickup with planetary bevel gear for the wheelchair. After determining the basic function of the wheelchair aids, the study determines the design parameters by using the knowledge of pa

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Sambuu, A., A. Dapildai, and N. Khomushku. "Evaluation of anthropogenic transformation of Tuva steppe vegetation by the method of main components." Bulletin of Science and Practice 4, no. 9 (2018): 26–31. https://doi.org/10.5281/zenodo.1418487.

Повний текст джерела

Анотація:

The analysis of such indicators as changes in species composition, species dominance structure, plant matter reserves under the influence of different grazing regimes in the Ubsunur depression (South Tuva) shows a close relationship of all indicators of phytocenosis with pasture load. Any change in the grazing regime of phytocenosis corresponds to natural changes in its species composition, a structure of dominance and intensity of the production process.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Iryna, Vishka. "The main elements, components and derivatives that form the administration system at the enterprise." Economics: time realities 2, no. 42 (2019): 18–25. https://doi.org/10.5281/zenodo.3407092.

Повний текст джерела

Анотація:

The work outlines the concept of a system of administration, which is a set of components that are interrelated and act as independent units, operate with the external environment as a whole. To such components from which the system of administrative management in the enterprise is enrolled: subject, object, object, factors, functions, goals, tasks, levels, elements, methods, resources, criteria of administrative units, parameters and tools. The interconnections between these components are established, which confirms their systemicity in the formed structure. The distribution of administrativ

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Loriemi, A., G. Jacobs, and D. Bosse. "Estimation of rotor and main bearing loads using artificial neural networks." Journal of Physics: Conference Series 2151, no. 1 (2022): 012002. http://dx.doi.org/10.1088/1742-6596/2151/1/012002.

Повний текст джерела

Анотація:

Abstract Wind energy is one of the most important technologies for a climate-neutral energy supply. However, the premature failure of wind turbines due to unknown loads leads to a reduction in competitiveness compared to other energy sources. Here, load monitoring systems can make a significant contribution to the prevention of such failures. Most load monitoring systems for wind turbines focus on strain signals of structural components as the tower, main shaft or the rotor blade root. Based on these signals, axial forces, torsion or bending moments, which are acting on these components, are c

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Zhao, Guang Yao, Peng Fu, Chuan Yin Tang, and Di Zhang. "Study on Effect of Rolling Crashworthiness of the Main SUV Vehicle Components." Advanced Materials Research 230-232 (May 2011): 620–24. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.620.

Повний текст джерела

Анотація:

Aimed at the body of SUV vehicle , according to the criteria of FMVSS216 vehicle safety regulations , in LS-DYNA software environment , the simulation analysis of effects of the design parameters of main components of the body on roll crashworthiness in the process of vehicle crashing and rolling is presented in the paper , based on finite element analysis method, with the test methods of applying pendulum collision. The characteristics of the crashworthiness and energy absorption of the pillar pendulum which have different design parameters, such as shapes and thickness, et. al., are emphasiz

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Shen, Jingyuan, Yanjing Zhang, Yizhong Ma, and Cong Lin. "A novel opportunistic maintenance strategy for systems with dependent main and auxiliary components." IMA Journal of Management Mathematics 32, no. 1 (2020): 69–90. http://dx.doi.org/10.1093/imaman/dpaa016.

Повний текст джерела

Анотація:

Abstract The complexity of dependence between different types of components results in many challenges to estimate system reliability and to optimize maintenance plans. In this paper, we develop a reliability model to study the failure dependence of a system with a main component and several protective auxiliary components. Damage to the main component caused by random environmental shocks depends on the number of auxiliary components in operation. When the execution of inspection and maintenance actions during system operation is difficult, failures of the main component provide opportunities

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Сероштан, М. В., О. В. Бережная, and Фавваз Дарвиш. "THE METHOD OF MAIN COMPONENTS AS A TOOL FOR STRATEGIC INNOVATION MANAGEMENT IN THE FIELD OF SMALL BUSINESS." Scientific Journal ECONOMIC SYSTEMS 1, no. 255 (2022): 12–25. http://dx.doi.org/10.29030/2309-2076-2022-15-4-12-25.

Повний текст джерела

Анотація:

The article presents the results of a study of the possibility of using multifactor analysis – the method of the main components for measuring and evaluating innovations in the field of small business as an object of strategic management on the example of the subjects of the Central Federal District. The algorithm of application of the principal component’s method is considered, consisting of the following stages: the formation of the empirical base of the study (includes the definition of the list and calculation of the initial variables, their normalization); calculation of the principal com

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Wroblewski, N. F., P. N. Gerasimov, and O. A. Korotky. "Development of main components of device for measuring residual stresses." Issues of radio electronics, no. 11 (November 20, 2019): 65–69. http://dx.doi.org/10.21778/2218-5453-2019-11-65-69.

Повний текст джерела

Анотація:

The paper presents the results of the study of the stress state of machine elements and structures in which there are residual stresses. Examines the use of overhead eddy current and magneto-elastic transducers, investigates the process of measurement of residual stresses. It is proved that the cause of measurement errors is the instability of the gap between the transducer and the surface of the object. It is proved that during calibration and measurements, the installation of the gap and its control should be carried out by the magnitude of the magnetic resistance. Undesirable effects of var

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Zhai, Yiyang, Chi Zhang, Bo Wang, Xue Wang, Kai Liu, and Zhongze Tang. "The Standardization Method and Application of the BIM Model for Interchanges." Applied Sciences 12, no. 17 (2022): 8787. http://dx.doi.org/10.3390/app12178787.

Повний текст джерела

Анотація:

Research on the standardization of interchange BIM components is required to encourage the use of BIM technology in interchange and quicken the development and improvement of relevant standards and specifications. The depth level of the model, classification, and coding of interchange BIM components, and the design and administration of the component library are the main topics of this work. First, the concept and main research content on the standardization of interchange BIM components were proposed. Second, the common forms of interchange were summarized. The basic components of interchange

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Solodovnikov, Serhii, Alla Bondarenko, and Maksym Zhytar. "Image of Higher Education Institutions: Main Components and Determinants." Marketing and Management of Innovations 15, no. 2 (2024): 162–76. http://dx.doi.org/10.21272/mmi.2024.2-12.

Повний текст джерела

Анотація:

In the modern world, a significant role in the development of the innovative economy of the state is played by the training of highly qualified specialists who can produce new innovations and knowledge and build an efficient growing economy, manifested in the growth of the country’s GDP. The training of such specialists is the responsibility of higher education institutions, which in today’s, mainly Ukrainian, realities are struggling for applicants, which manifests itself in the formation of stakeholders’ perceptions of the university, i.e., the formation of its own image. The image of a high

Стилі APA, Harvard, Vancouver, ISO та ін.

27

L., Pană. "The influence of switching actions with redundant components on the main reliability substations." Scientific Bulletin of Naval Academy XXII, no. 2 (2019): 284–95. http://dx.doi.org/10.21279/1454-864x-19-i2-034.

Повний текст джерела

Анотація:

In this paper is presented a substations reliability analysis based upon substation’s component outage or failure modes. The switching actions can be modelled in the reliability evaluation indices we used the three-state model of the substation components (for example circuit breaker). The reliability indices are evaluated using the minimal cut-set method for each components of substation.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Mussaibekov, Rashid, Sandugash Kappassova, Berik Atayev, Bauyrzhan Rakhimzhanov, and Kenessary Suleimenov. "On the essence and main components of the research approach in teaching mathematics at school." Scientific Herald of Uzhhorod University Series Physics 2024, no. 55 (2024): 1975–84. http://dx.doi.org/10.54919/physics/55.2024.197vy5.

Повний текст джерела

Анотація:

Relevance. The modern stage of social development is characterized by the rapid progress of science, which is expressed in deep study of mathematical methods for modelling natural phenomena and various processes, that is, a lot of attention is paid to methods of mathematical modelling.Purpose. This paper studies the problem that without an appropriate research approach in teaching mathematics, i.e., without the organization of the educational process and the implementation of critical analysis and cognitive thinking, it is impossible to form a high level of critical thinking.Methodology. The m

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Holubova, Halyna. "A comparative analysis of the principal component method and parallel analysis in working with official statistical data." Statistics in Transition new series 24, no. 1 (2023): 199–212. http://dx.doi.org/10.59170/stattrans-2023-011.

Повний текст джерела

Анотація:

The dynamic development of the digitized society generates large-scale information data flows. Therefore, data need to be compressed in a way allowing its content to remain complete and informative. In order for the above to be achieved, it is advisable to use the principal component method whose main task is to reduce the dimension of multidimensional space with a minimal loss of information. The article describes the basic conceptual approaches to the definition of principle components. Moreover, the methodological principles of selecting the main components are presented. Among the many way

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Niţu, Nicolae-Adrian, and Carmen Bujoreanu. "Considerations on Classification of the Main Components of the Vehicles By their Vibroacoustic Fingerprint." Bulletin of the Polytechnic Institute of Iași. Machine constructions Section 68, no. 2 (2022): 73–80. http://dx.doi.org/10.2478/bipcm-2022-0016.

Повний текст джерела

Анотація:

Abstract The modern car industry is evolving under new premises, such as new propulsion technology, which imply offering to the customer the completed new solutions (charging station, service contract and remote diagnosis). Proven diagnostic technology is reaching its limits because is generally based on detecting the electrical faults and the mechanical, hydraulic and pneumatic failures have a slight degree of detection by this method. An alternative method of diagnosis could be the study of actual noise and vibration parameters of the main components of the vehicle subject to major faults an

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Shao, Jie, Zhi Qiang Li, Xiu Quan Han, Xiao Ning Han, and Ying Deng. "Application of SPF/DB New Structure to Titanium Main-Load Carrying Components." Materials Science Forum 735 (December 2012): 210–14. http://dx.doi.org/10.4028/www.scientific.net/msf.735.210.

Повний текст джерела

Анотація:

In this paper, we proposed a new superplastic forming and diffusion bonding (SPF/DB) structure and processed validation between traditional SPF/DB four sheets structure and the new structure at the coincidence boundary conditions by FEM method. The calculation results show that the new structure can decreases the maximum stress at the joining part by 82% and decreases the maximum displacement at the aerofoil tip by 51% at the cost of the mass increases less than 20%. It induces that the new structure presents better stiffness and greater load carrying capacity than traditional ones, therefore,

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Landowski, Bogdan, Kamil Chisiński, and Łukasz Muślewski. "Elements of photovoltaic system design method." MATEC Web of Conferences 351 (2021): 01019. http://dx.doi.org/10.1051/matecconf/202135101019.

Повний текст джерела

Анотація:

The study presents selected elements of a design method for renewable energy system based on photovoltaic technology. The main problems involved in the so called 500kW photovoltaic farm are discussed. Examples of a few general concepts of photovoltaic farm systems are presented. Exemplary criteria for the concept selection are proposed. The main components to be used in a photovoltaic farm are presented, and some stages of the photovoltaic farm design are characterized.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Xu, Xin Jian. "CNC Transformation Method for the Study." Advanced Materials Research 490-495 (March 2012): 1256–60. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1256.

Повний текст джерела

Анотація:

This paper describes the need for transformation of CNC machine tools, CNC machine tools and a brief introduction to the content and transformation of the advantages and disadvantages, but focuses on how the transformation of CNCmachine tools including CNC system selection, transformation NC modificationof the main mechanical components and CNC transformation of the main steps,and cited several examples of digital transformation, and finallyshows the numerical transformation of the problem and made recommendations.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Hariono, Budi, and Risse Entikaria Rachmanita. "Main Components of The Semboro Variety of Siam Orange Peel Essential Oil Prepared Using Water Distillation Method." Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) 13, no. 2 (2024): 547. http://dx.doi.org/10.23960/jtep-l.v13i2.547-554.

Повний текст джерела

Анотація:

The maximum production potential for low quality oranges is 15% or 9,057 tons/year, the potential for orange peel waste is 50% of the total weight of oranges or the equivalent of 4,500 tons of orange peel waste The average yield of orange peel essential oil is 0.6%, resulting in a potential of 27 tons/year. The aim of this research is to obtain information regarding the best heating temperature in the distillation process and to identify the main components of Siam orange peel essential oil of the Semboro variety. The research was carried out using a laboratory-scale water distillation system,

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Liang, Meng Hai, Shu Ying Wang, Zhan Min Yang, and Yi Wang. "Continuous Plane Method Design Conical Surface Artifacts." Applied Mechanics and Materials 380-384 (August 2013): 4332–35. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.4332.

Повний текст джерела

Анотація:

Established a unified equation of conical surface cutting line, analyzed the main cutting line critical characteristics, studies the section curve of plane problems, discussion plane curve property, continuous planar interception solution of two types of components are presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Nugraha, I. Made Aditya, and Frengky Yeremias Malelak. "FMEA Approach in Risk Analysis of Main Engine Fuel System Maintenance: Case Study on The Express Bahari 1F." Jurnal Teknik Mesin 17, no. 1 (2024): 20–26. http://dx.doi.org/10.30630/jtm.17.1.1292.

Повний текст джерела

Анотація:

The fuel system is one of the main engine support systems which is very important in the operation of the Express Bahari 1F main engine. Operation of the main engine requires special treatment of the components of the main engine to prevent failure during operation. The Failure Mode and Effect Analysis (FMEA) method is a method that can be used to identify the priority scale in maintaining a machine by evaluating the risk of failure occurring on the machine. This research uses FMEA analysis to determine the priority scale for maintenance of the Express Bahari 1F main engine fuel system. The id

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Makovoz, O. V., and V. O. Ishchenko. "Motivation components of personnel management at enterprises." Economic Bulletin of Dnipro University of Technology 85 (March 2024): 99–106. http://dx.doi.org/10.33271/ebdut/85.099.

Повний текст джерела

Анотація:

Methods. Methods of analysis and synthesis, empirical methods, methods of induction and deduction, graphic and logical methods, methods of financial, economic and statistical analysis were used in the process of researching the components of personnel management of enterprises. The methodological basis of the research is the index method, the results of which allow evaluating the main components of the enterprise personnel management. Results. The article provides a detailed analysis of statistical data and survey results regarding the main motivational components of personnel management at en

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Karola, Böhme, Calo-Mata Pilar, Barros-Velázquez Jorge, and Ortea Ignacio. "Recent applications of omics-based technologies to main topics in food authentication." TrAC Trends in Analytical Chemistry 110 (June 7, 2019): 221–32. https://doi.org/10.5281/zenodo.14512279.

Повний текст джерела

Анотація:

Food adulteration, mislabeling and fraud, either unintentional or deliberate, is a worldwide and growing concern. Current challenges associated with food adulteration comprise many topics: geographic origin, breed/variety identification, production method, feeding regime, technological processing, undeclared components, detection of genetically modified organisms and species substitution are the most common frauds. Accurate and reliable analytical methods are needed to monitor and control food authenticity and to guarantee correct and accurate labeling of foodstuffs, assuring that the componen

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Gololobov, Peter, Prokopy Krivoshapkin, Germogen Krymsky, and Sardaana Gerasimova. "INVESTIGATING THE INFLUENCE OF GEOMETRY OF THE HELIOSPHERIC NEUTRAL CURRENT SHEET AND SOLAR ACTIVITY ON MODULATION OF GALACTIC COSMIC RAYS WITH A METHOD OF MAIN COMPONENTS." Solar-Terrestrial Physics 6, no. 1 (2020): 24–28. http://dx.doi.org/10.12737/stp-61202002.

Повний текст джерела

Анотація:

The work studies the cumulative modulating effect of the geometry of the interplanetary magnetic field's neutral current sheet and solar activity on propagation of galactic cosmic rays in the heliosphere. The role of each factor on the modulation of cosmic rays is estimated using a method of main components. The application of the method to experimental data on solar activity, to the tilt angle of the neutral sheet, and cosmic ray intensity for a long period from 1980 to 2018 allows us to reveal the temporal dynamics of roles of these factors in the modulation. The modulation character is show

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Khairulina, Nailia, and Iryna Skliarova. "Artistic and semiotic components of Yevhen Pluzhnyk’s poetry." Bulletin of Luhansk Taras Shevchenko National University, no. 2 (361) (2024): 224–30. http://dx.doi.org/10.12958/2227-2844-2024-2(361)-224-230.

Повний текст джерела

Анотація:

The article under consideration aims to explore the main artistic and semiotic components of Yevhen Pluzhnyk’s poetry, reveal their semantic load in the works, and determine the figurative dominants of the artist’s life philosophy presented in his lyrics. To achieve this goal, we used the following methods: the systematization of the selected material, the method of observation, analysis, synthesis, and the descriptive method. Intertextuality made it possible to consider the poetic heritage of the writer from the point of view of textual connections with contemporary authors and his predecesso

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Григорьев, Владислав, Vladislav Grigoryev, Сергей Стародубцев, Sergei Starodubtsev, Петр Гололобов, and Peter Gololobov. "Monitoring of geomagnetic disturbances using the global survey method in real time." Solar-Terrestrial Physics 5, no. 3 (2019): 93–97. http://dx.doi.org/10.12737/stp-53201911.

Повний текст джерела

Анотація:

A method for forecasting geomagnetic storms using the realization of the global survey method in real time is presented. The method is based on data from the worldwide network of neutron monitors NMDB. Using this method, we analyze the behavior of components of three-dimensional angular distribution of cosmic rays in the interplanetary medium, which were due to the first two spherical harmonics, over the period from 2013 to 2018. We have established that the main parameters that respond to the arrival of geoeffective disturbances of the interplanetary medium at Earth are changes in amplitudes

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Stepanova, O. N., and D. P. Stepanova. "IMAGE OF WOMEN’S WEIGHTLIFTING: MAIN COMPONENTS AND THEIR CHARACTERISTICS." Pedagogical IMAGE 14, no. 3 (2020): 411–22. http://dx.doi.org/10.32343/2409-5052-2020-14-3-411-422.

Повний текст джерела

Анотація:

Purpose of research. The study aimed to develop a statistical model of an image of women’s weightlifting. Methods and organization of research. The first stage of the study involved interviewing 77 Moscow schoolgirls aged 12–14. The girls were asked to express their associations, thoughts, or value judgments related to women’s weightlifting. The obtained data were processed using qualitative and quantitative content analysis. The second stage of the study focused on selecting antonymic (opposite in meaning) pairs of statements characterizing women’s weightlifting. Thus, a set of 31 bipolar sca

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Shang, Yun Feng, Li Kuan, Wen Yu Zhu, and Jian Ming Ouyang. "Washing Method, an Accurate Detection Method of Urinary Nanocrystallites to Eliminate Interference of Soluble Components in Urine." Advanced Materials Research 781-784 (September 2013): 932–35. http://dx.doi.org/10.4028/www.scientific.net/amr.781-784.932.

Повний текст джерела

Анотація:

Using X-ray power diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), the chemical composition of urinary nanocrystallites from 3 calcium phosphate (CaP) stone-formers were investigated and compared with that from healthy subjects. The main components of nanocrystallites in urine of CaP stone formers were uric acid and CaP, while that in healthy urine was mainly uric acid, which indicated a significant difference. This study purposed an accurate detection method of urinary nanocrystallites, namely washing the urinary crystallites samples with double distilled water, which ca

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Ji, Chun Lei, and Shun Cheng Yan. "UML-Based Full Function Point Measurement Method." Applied Mechanics and Materials 220-223 (November 2012): 2879–85. http://dx.doi.org/10.4028/www.scientific.net/amm.220-223.2879.

Повний текст джерела

Анотація:

Full Function Point measurement method (COSMIC-FFP) is too abstract and difficult to be applied to object-oriented software. By analyzing the notional relationship between main components of UML and main elements of COSMIC-FFP, we establish 22 measurement mapping rules, propose UML-Based COSMIC-FFP method and list the measurement process and measurement steps. An example is given and the results show that this method can measure the functional size of object-oriented software objectively and effectively.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Asil, Hasan. "Chemical components in the essential oils and ultrasonic extraction of amanus sage pholomis longifolia var. Longifolia boiss. & bl." Bangladesh Journal of Botany 52, no. 3 (2023): 799–803. http://dx.doi.org/10.3329/bjb.v52i3.68899.

Повний текст джерела

Анотація:

In the present study the essential oil components of the flowers and leaves of Amanus sage Pholomis longifolia var. longifolia boiss. & Bl by ultrasonic extraction and steam distillation method were determined. According to the chemical composition analysis of Amanus Sage plant using ultrasonic extraction method, major components were methyl-7-octadecenoate (69.02%) and methyl elaidate (16.87%). The essential oil contents of flowers and leaves of the Amanus sage plant were also determined by steam distillation method. When the essential oil components of the flower were examined, the main

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Soledispa, Pilar A., José González, Armando Cuéllar, Julio Pérez, and Max Monan. "GC-MS Chemical Characterization of Main Components of Smilax Domingensis Wild. in Cuba." Journal of Agricultural Studies 5, no. 4 (2018): 79. http://dx.doi.org/10.5296/jas.v6i2.13099.

Повний текст джерела

Анотація:

A preliminary chemical characterization of main components of ethanolic extract with dried rhizomes of Smilax domingensis Wid. that grow in Cuba was done using a GCMS-QP2010 Ultra Shimadzu and the mass spectra of the compounds found in the extract was matched with the National Institute of Standards and Technology (NIST) library. After sample derivatization 125 chemical compounds were registered by the equipment and from them, 35 different chemical components were characterized and reported for the first time from this part of the plant in our country. The results demonstrate the developed met

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Jiang, Yunrui, Jie Shi, and Shaoqin Li. "Study on the Analysis of Main Components of Aluminum Alloy by XRF (X-Ray Fluorescence Analysis) Method." OALib 08, no. 09 (2021): 1–6. http://dx.doi.org/10.4236/oalib.1107845.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Hrynchak, N. "APPLICATION OF THE MAIN COMPONENTS METHOD FOR DETERMINATION OF FACTORS OF LOGISTICS SERVICES MARKET DEVELOPMENT OF UKRAINE." Series: Economic science 7, no. 160 (2020): 40–47. http://dx.doi.org/10.33042/2522-1809-2020-7-160-40-47.

Повний текст джерела

Анотація:

The study identifies and substantiates the main factors influencing the development of the market of logistics services in Ukraine through factor analysis by the method of main components. The application of the method of factor analysis to assess the development of the market of logistics services is based on the assumption that the indicators of different blocks are only indicators of certain existing market characteristics that are not directly measured. 9 indicators were selected for the study: wholesale turnover of enterprises, retail trade turnover, volume of exports of goods, volume of

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ruspini, L. C., E. Dari, C. Padra, G. H. Paissan, and N. N. Salva. "Design of fluid components using the topological optimization method." Engineering Computations 36, no. 5 (2019): 1430–48. http://dx.doi.org/10.1108/ec-11-2018-0527.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to present applications of the topological optimization method dealing with fluid dynamic problems in two- and three dimensions. The main goal is to develop a tool package able to optimize topology in realistic devices (e.g. inlet manifolds) considering the non-linear terms on Navier–Stokes equations. Design/methodology/approach Using an in-house Fortran code, a Galerkin stabilized finite element is implemented method to solve the three equation systems necessary for the topological optimization method: the direct problem, adjoint problem and topological de

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Syrlybayeva, N.E., and Z. Badanbekkyzy. "THE PROJECT METHOD AS A MODERN LEARNING TECHNOLOGY." Deutsche internationale Zeitschrift für zeitgenössische Wissenschaft 47 (December 30, 2022): 24–30. https://doi.org/10.5281/zenodo.7495607.

Повний текст джерела

Анотація:

The article discusses the project work, the components, processes and stages of which fully set out the basic principles and reflections of such methods in the field of language learning. The student's socio-cultural activities are clearly analyzed, the main contributing methodological and theoretical steps perform approaches to national project technology work.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!