Добірка наукової літератури з теми "Oil-water emulsions- Crude"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Oil-water emulsions- Crude".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Oil-water emulsions- Crude"

1

Abouther Thalib Halboose, Mudhaffar Yacoub Hussein, and Raheem Jafar Aziz. "Study the effect of Water content and Temperature on the stability of Crude Oil/Water Emulsions." Journal of the College of Basic Education 20, no. 86 (2023): 987–92. http://dx.doi.org/10.35950/cbej.v20i86.9912.

Повний текст джерела
Анотація:
During the crude oil production, water-in-oil stable emulsions may be created. Water which is naturally present in oil reservoirs mixes with crude oil to form very stable emulsions due to very high shear rates and zones of turbulence encountered at the wellhead and pipe of production. The formation of these emulsions is generally caused by the presence of resins, asphaltenes, wax and naphtenic acid which play the role of "natural emulsifiers. The aim of this study was to focus on some important factors in the formation and stabilize crude oil/water emulsions. These factors are the water conten
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Tang, Longhao, Tingyi Wang, Yingbiao Xu, et al. "Research and Application Progress of Crude Oil Demulsification Technology." Processes 12, no. 10 (2024): 2292. http://dx.doi.org/10.3390/pr12102292.

Повний текст джерела
Анотація:
The extraction and collection of crude oil will result in the formation of numerous complex emulsions, which will not only decrease crude oil production, raise the cost of extraction and storage, and worsen pipeline equipment loss, but also seriously pollute the environment because the oil in the emulsion can fill soil pores, lower the soil’s permeability to air and water, and create an oil film on the water’s surface to prevent air–water contact. At present, a variety of demulsification technologies have been developed, such as physical, chemical, biological and other new emulsion breaking te
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Nagy, Roland, Andrea Elekes, László Bartha, and Árpád Vágó. "Rheological characterization of crude oil-water emulsions." Epitoanyag - Journal of Silicate Based and Composite Materials 68, no. 4 (2016): 98–104. http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Faizullayev, Saidulla, Erik Sailaubay, and Akbota Adilbekova. "Thermal treatment of model water-in-oil emulsions by coal fly ash particles." Chemical Bulletin of Kazakh National University, no. 1 (March 31, 2025): 4–10. https://doi.org/10.15328/cb1392.

Повний текст джерела
Анотація:
One of the primary challenges in the oil industry is the formation of stable crude oil emulsions, which cause equipment and pipeline corrosion due to the inorganic salts dissolved in the aqueous phase. This study investigated the effect of coal fly ash on model crude oil emulsions. The model emulsions were prepared using crude oil samples from the Kyzylorda and Atyrau regions. Thermal demulsification at 60°C resulted in a low dewatering rate, with only 16% of water separated from a 50% water-in-oil emulsion. Higher efficiency in oil emulsion separation was observed using the microwave treatmen
Стилі APA, Harvard, Vancouver, ISO та ін.
5

N. H. Abdurahman and H. A. Magdib. "Surfactant (UMP) for emulsification and stabilization of water-in-crude oil emulsions (W/O)." Maejo International Journal of Energy and Environmental Communication 2, no. 2 (2020): 18–21. http://dx.doi.org/10.54279/mijeec.v2i2.245027.

Повний текст джерела
Анотація:
The purpose of this research is to look into the formulation and evaluation of concentrated water-in-oil (W/O) emulsions stabilized by UMP NS-19-02 surfactant and their application for crude oil emulsion stabilization using gummy Malaysian crude oil. A two-petroleum oil from Malaysia oil refinery, i.e., Tapis petroleum oil and Tapis- Mesilla blend, were utilized to make water-in-oil emulsions. The various factors influencing emulsion characteristics and stability were evaluated. It was discovered that the stability of the water-in-oil emulsion improved by UMP NS-19-02 improved as the surfactan
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Buist, Ian A., and Nick Glover. "IN SITU BURNING OF ALASKA NORTH SLOPE EMULSIONS." International Oil Spill Conference Proceedings 1995, no. 1 (1995): 139–46. http://dx.doi.org/10.7901/2169-3358-1995-1-139.

Повний текст джерела
Анотація:
ABSTRACT The onset of water-in-oil emulsion formation in an oil slick often signals the closing of the window of opportunity for in-situ burning as a countermeasure. Water contents in excess of 25 percent in a stable emulsion generally preclude ignition of the slick. A study of in-situ burning of water-in-oil emulsions formed by weathered Alaska North Slope (ANS) crude oil has recently been completed by Alaska Clean Seas. The study consisted of three phases: laboratory-scale burns in Ottawa in a 0.13 m2 burn ring, small-scale burns in Prudhoe Bay in 1.2 m2 and 3.3 m2 pans, and meso-scale burns
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Akbari, Sweeta, and Abdurahman Hamid Nour. "Stabilization of crude oil emulsions using different surfactants." International Journal of Innovative Research and Scientific Studies 1, no. 1 (2018): 23–26. http://dx.doi.org/10.53894/ijirss.v1i1.6.

Повний текст джерела
Анотація:
Emulsions can be found in different industries such as petroleum, food, cosmetic and pharmaceutics. Generally, there are two types of emulsions in petroleum industries: water-in-oil (W/O) and oil-in-water (O/W). The aim of this research was to evaluate the stability of W/O emulsions using different emulsifiers such as Span 80, Span 83, Triton-x-100, DEA, and LSWR with different concentrations (1.5 and 2.5) vol%. All the emulsions were prepared at (20-80) vol% and 2000 rpm. The result of this study showed that the most stable emulsions were prepared by Span 80. However, LSWR formed the most uns
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Manthey, Frank A., John D. Nalewaja, and Edward F. Szelezniak. "Herbicide-Oil-Water Emulsions." Weed Technology 3, no. 1 (1989): 13–19. http://dx.doi.org/10.1017/s0890037x00031237.

Повний текст джерела
Анотація:
Oil-water emulsion stability was determined for crop origin and refinement of seed oils and their methyl esterified fatty acids (methylated seed oil) as influenced by emulsifiers and herbicides. Oil-in-water emulsion stability of one-refined, degummed, and crude seed oils was affected by the emulsifier. However, emulsion stability of methylated seed oil was not affected by the refinement of the seed oil used to produce the methylated seed oil or by the emulsifier. Oils without emulsifiers or emulsifiers alone added to formulated herbicide-water emulsions reduced emulsion stability depending up
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Quej-Ake, L. M., A. Contreras, and Jorge Aburto. "The effect of non-ionic surfactant on the internal corrosion for X52 steel in extra-heavy crude oil-in-water emulsions." Anti-Corrosion Methods and Materials 65, no. 3 (2018): 234–48. http://dx.doi.org/10.1108/acmm-03-2017-1770.

Повний текст джерела
Анотація:
Purpose The purpose of this research is to study different extra-heavy crude oil-in-water emulsions that can be found in practice for corrosion process of X52 steel adding 60 mg.L-1 of non-ionic surfactant and a corrosion inhibitor (CI). Electrochemical impedance spectroscopy and Tafel plots are carried out. Thus, Bode-modulus and Bode-phase angle plots are discussed. Adsorption isotherms obtained from corrosion rate (CR) values are taken into account. Design/methodology/approach Two-electrode arrangement is used to characterize the pseudo-capacitance values for X52 steel exposed to water and
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Maddah, Zenah Hani, and Tariq Mohammed Naife. "Demulsification of Water in Iraqi Crude Oil Emulsion." Journal of Engineering 25, no. 11 (2019): 37–46. http://dx.doi.org/10.31026/j.eng.2019.11.03.

Повний текст джерела
Анотація:
Formation of emulsions during oil production is a costly problem, and decreased water content in emulsions leads to increases productivity and reduces the potential for pipeline corrosion and equipment used. The chemical demulsification process of crude oil emulsions is one of the methods used for reducing water content. The demulsifier presence causes the film layer between water droplets and the crude oil emulsion that to become unstable, leading to the accelerated of water coalescence. This research was performed to study the performance of a chemical demulsifier Chimec2439 (commercial) a b
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Oil-water emulsions- Crude"

1

Ligiero, Leticia. "Crude oil/water interface characterization and its relation to water-in-oil emulsion stability." Thesis, Pau, 2017. http://www.theses.fr/2017PAUU3048/document.

Повний текст джерела
Анотація:
La formation d’émulsions stables eau/huile lors des processus de récupération et de raffinage du pétrole peut impacter défavorablement l’efficacité de ces opérations. Bien que résines et asphaltènes soient généralement tenus pour responsables de la stabilité des émulsions, la composition exacte des molécules présentes à l’interface eau/huile est en réalité assez mal connue. L’identification de ces molécules et la connaissance de leur influence sur la propriété des interfaces est une étape nécessaire pour mieux prédire les problèmes de stabilité des émulsions dans l’industrie pétrolière. Cette
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mehta, Shweta D. "Making and breaking of water in crude oil emulsions." Thesis, Texas A&M University, 2005. http://hdl.handle.net/1969.1/3286.

Повний текст джерела
Анотація:
An understanding of the processes involved in oil spills, and how they interact to alter the composition and behavior of the oil with respect to time is essential to determine an effective oil spill response. The review of past research has shown more focus on the laboratory methods and computerized modeling schemes to estimate the formation and breaking of emulsions after an oil spill. However, relatively less effort has gone into the study of emulsions corresponding to actual field conditions. This research aims to simulate an oil spill at sea by developing a new technique to make water in o
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shakorfow, Abdelmalik Milad. "Process intensification in the demulsification of water-in-crude oil emulsions via crossflow microfiltration through a hydrophilic polyHIPE polymer (PHP)." Thesis, University of Newcastle Upon Tyne, 2012. http://hdl.handle.net/10443/1745.

Повний текст джерела
Анотація:
In petroleum industry, highly stable water-in-oil (w/o) emulsions are formed during extraction process and these emulsions are stabilized by the indigenous surface active species in the oil. The recovery of crude oil through emulsion breakdown and subsequent separation (demulsification) should be carried out at source in order to avoid costly pumping and cooling of emulsion which enhances emulsion stability. Although conventional methods available for emulsion breakdown using demulsifiers and electric field separation, in the case of viscous crude oils with large amounts of indigenous surfacta
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bresciani, Antonio Esio. "Análise do processo de dessalgação de petróleo - otimização do uso de água." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/3/3137/tde-20072009-101225/.

Повний текст джерела
Анотація:
Este trabalho visa o estudo da viabilidade da redução do uso de água no processo de dessalgação em refinarias de petróleo. Em uma primeira fase, foi necessário o estudo teórico da separação das emulsões água/óleo. Em seguida, foi desenvolvido um modelo matemático baseado nas forças atuantes nas gotas de água, o que possibilitou a determinação do tempo entre as colisões de pares de gotas e o estabelecimento do critério para que ocorra o fenômeno de coalescência. Esse modelo foi empregado em um sistema desenvolvido com base em autômatos celulares, o qual possibilitou o acompanhamento do processo
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Luzinova, Yuliya. "Mid-infrared sensors for hydrocarbon analysis in extreme environments." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/41156.

Повний текст джерела
Анотація:
A number of MIR sensing platforms and methods were developed in this research work demonstrating potential applicability of MIR spectroscopy for studying hydrocarbon systems in extreme environments. First of all, the quantitative determination of the diamondoid compound adamantane in organic media utilizing IR-ATR spectroscopy at waveguide surfaces was established. The developed analytical strategy further enabled the successful detection of adamantane in real world crude oil samples. These reported efforts provide a promising outlook for detection and monitoring of diamondoid constituents
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Stoyel, Jason Alexander. "Fundamentals of drop coalescence in crude oil." Thesis, Imperial College London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312176.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Sinker, Alastair Brenton. "An experimental study droplet stability and separation performance in dewatering hydrocyclones." Thesis, University of Southampton, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.387899.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Xia, You. "Experiments on EHD injection, interaction and electrocoalescence of water droplet pairs in oil." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAI039/document.

Повний текст джерела
Анотація:
Lorsque des champs électriques sont appliqués à des mélanges eau-huile, les petites gouttelettes d'eau sont attirées entre elles et se regroupent en gouttes plus grosses. Ce processus d’électrocoalescence rend plus efficace la séparation huile-eau par sédimentation.Des données expérimentales sur l’électrocoalescence de très petites gouttelettes sont nécessaires pour améliorer la compréhension de la dynamique de l'interface eau-huile et pour valider les modèles numériques. La configuration simple étudiée dans ce travail de thèse concerne une petite paire de gouttelettes tombant dans une cuve d'
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mazumdar, Meenakshi. "Studies on shear and gravity induced coalescence in oil-wateremulsions." Thesis, 2017. http://localhost:8080/xmlui/handle/12345678/7409.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Walavalkar, Ajey Y. "Combustion of water-in-oil emulsions of diesel and fresh and weathered crude oils floating on water." 2001. http://etda.libraries.psu.edu/theses/available/etd-0317101-204038/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Oil-water emulsions- Crude"

1

Panoussopoulos, Konstantin. Separation of crude oil-water emulsions: Experimental techniques and models. 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Oil-water emulsions- Crude"

1

McMahon, Andrew J. "Interfacial Aspects of Water-in-Crude Oil Emulsion Stability." In Emulsions — A Fundamental and Practical Approach. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2460-7_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Stockwell, A., A. S. Taylor, and D. G. Thompson. "The Rheological Properties of Water-in-Crude-Oil Emulsions." In Surfactants in Solution. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-1833-0_39.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

LEE, YEIN MING, SYLVAN G. FRANK, and JACQUES L. ZAKIN. "Rheology of Concentrated Viscous Crude Oil-in-Water Emulsions." In ACS Symposium Series. American Chemical Society, 1985. http://dx.doi.org/10.1021/bk-1985-0272.ch030.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Giordano, J. P., T. H. Plegue, S. G. Frank, J. L. Zakin, and D. H. Fruman. "A study of concentrated viscous crude oil-in-water emulsions." In Progress and Trends in Rheology II. Steinkopff, 1988. http://dx.doi.org/10.1007/978-3-642-49337-9_102.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mingyuan, Li, Alfred A. Christy, and Johan Sjøblom. "Water-in-Crude Oil Emulsions from the Norwegian Continental Shelf Part-VI — Diffuse Reflectance Fourier Transform Infrared Characterization of Interfacially Active Fractions from North Sea Crude Oil." In Emulsions — A Fundamental and Practical Approach. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2460-7_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Grosso, Jorge L., Maria I. Briceńo, Jose Paterno, and Ignacio Layrisse. "Influence of Crude Oil and Surfactant Concentration on the Rheology and Flowing Properties of Heavy Crude Oil-in-Water Emulsions." In Surfactants in Solution. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-1833-0_41.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Anand, Vikky, and Rochish M. Thaokar. "Stability and Destabilization of Water-in-Crude Oil Emulsion." In Catalysis for Clean Energy and Environmental Sustainability. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65021-6_22.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Akay, G., Z. Z. Noor, and M. Dogru. "Process Intensification in Water-in-Crude Oil Emulsion Separation by Simultaneous Application of Electric Field and Novel Demulsifier Adsorbers Based on Polyhipe Polymers." In ACS Symposium Series. American Chemical Society, 2005. http://dx.doi.org/10.1021/bk-2005-0914.ch023.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Rajamanickam, Karthika. "Technologies Involved in the Demulsification of Crude Oil." In Crude Oil - New Technologies and Recent Approaches [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99743.

Повний текст джерела
Анотація:
Due to the use of enhanced recovery processes that necessitate the use of a considerable amount of water, mature petroleum reservoirs generate crude oil with huge amounts of water. The majority of this water gets emulsified into crude oil during production, increasing viscosity and making flow more difficult, resulting in production, transportation, and refining operational challenges that have an influence on corporate productivity. Natural surfactants with a strong potential to create stable emulsions are naturally mixed with crude oils. Because crudes with a high amount of stable emulsion h
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bin Dzulkarnain, Iskandar, Muhammad Mohsin Yousufi, and Mysara Eissa Mohyaldinn Elhaj. "Emulsion Rheology: Applications and Measuring Techniques in Upstream Petroleum Operations." In Rheological Measurement Techniques and Analysis Methods [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1005241.

Повний текст джерела
Анотація:
Emulsions play a prominent role in the petroleum exploration and production fields. They act as working fluids for drilling exploration wells, cementing the completion assembly, and helping to enhance hydrocarbon production. Moreover, the liquid hydrocarbons produced are often in the form of emulsions. The rheological analysis is crucial for the effectiveness of emulsion-based working fluids as well as the optimization and refinement of water-engulfed crude oil produced. The chapter covers the vast role of emulsions in the petroleum upstream section and the rheological techniques applied (such
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Oil-water emulsions- Crude"

1

Bretherton, N., S. Robb, K. G. Richterova, D. Donaldson, and R. G. Smith. "Impact of Acetic Acid on Weld Corrosion and Its Mitigation." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09562.

Повний текст джерела
Анотація:
Abstract Calcium Naphthenate precipitation is often initiated by a rise in solution pH, as produced fluids are degassed. It can cause severe problems during the separation of oil and water, forming very stable emulsions and/or insoluble deposits in separators or crude dehydration/desalting vessels. Acetic acid injection is widely employed to maintain a low pH and prevent solids precipitation. This has significant implications for the integrity of the process pipework and vessels. The impact of acetic acid on weld-corrosion under typical oilfield conditions is reviewed and data presented to dem
Стилі APA, Harvard, Vancouver, ISO та ін.
2

de Waard, C., L. M. Smith, and B. D. Craig. "The Influence of Crude Oils on Well Tubing Corrosion Rates." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03629.

Повний текст джерела
Анотація:
Abstract An empirical formula derived from two sets of field data on tubing corrosion gives a satisfactory description for two different oil fields of the influence on corrosion of the API gravity of the oil and its watercut. A remarkably good level of agreement was found between predicted corrosion rates using this formula and field corrosion measurements. It reproduces the general concept that heavier oils are more protective than light ones, and that very light oils give hardly any protection at all. It also reflects the likelihood of various modes of corrosion associated with competitive w
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kronenberger, Donald L., and Deborah A. Pattison. "Troubleshooting the Refinery Desalter Operation in the Era of Heavy, Sour Crude Charges." In CORROSION 1986. NACE International, 1986. https://doi.org/10.5006/c1986-86209.

Повний текст джерела
Анотація:
Abstract As available world crude oil supplies become progressively heavier, more sour and dirtier, and as the employment of secondary and tertiary recovery methods becomes increasingly widespread, the refineries’ desalters are being put to the test. The increasing oil weight, sulfur content and addition of impurities in production challenge the basic design of the chem-electric desalter and complicate its functioning as a pressurized-heater, gravitational settling and oil-water resolution device. The increasing oil weight leads to greater oil carry-under and the increased impurities act as em
Стилі APA, Harvard, Vancouver, ISO та ін.
4

De Turris, Antonio, Matilde de Romero, Sankara Papavinasam, and Rolando Lastra. "Effect of SRB, CO2, Crude Oil and Chemical Treatment on the Corrosivity of Synthetic Produced Water." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02213.

Повний текст джерела
Анотація:
Abstract The combined effect of sulphate-reducing bacteria (SRB), CO2 and crude oil on the corrosion of carbon steel in produced water were investigated using a rotating cage. During the experiment, pH, planktonic SRB, and concentrations of sulphide, sulphate, iron, calcium and magnesium ions were monitored. After the experiment, the sessile SRB were enumerated by serial dilution and optical microscopy, scanning electron microscopy, mass loss and laser profilometry were used to identify corrosion products, bacterial cell and corrosion rate. Both mass loss and localized pitting corrosion were t
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Kuo, Tzu-Chi, Adam Schmitt, Arash Nowbahar, et al. "Mechanistic Approaches to Break Water-in-Crude Oil Emulsions." In 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/qcje2805.

Повний текст джерела
Анотація:
Water-in-oil emulsions are commonly unavoidable and undesirable in the production, transportation, and refining of petroleum and related products. The emulsions are stabilized by a variety of surface-active compounds found in crude oil such as natural surfactants and fine mineral particles. A critical step in the processing of crude oil is to break the interfacial film formed at the oil/water interface to enable the coalescence and separation of water from oil. Demulsifiers are commonly used to promote the water removal process. However, the effectiveness of a demulsifier varies greatly due to
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhang, Jingjun, Dabin Chen, Dafan Yan, Xiaoheng Yang, and Chen Shen. "Pipelining of Heavy Crude Oil as Oil-in-Water Emulsions." In SPE Production Operations Symposium. Society of Petroleum Engineers, 1991. http://dx.doi.org/10.2118/21733-ms.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Adewunmi, Ahmad A., Muhammad Shahzad Kamal, Afeez Gbadamosi, and Shirish Patil. "Natural Extracted Waste Materials for Breaking Crude Oil Emulsion." In SPE Western Regional Meeting. SPE, 2023. http://dx.doi.org/10.2118/213007-ms.

Повний текст джерела
Анотація:
Abstract This study was performed to examine the efficacy of corn husks (CH) fine particles as potential natural demulsifier for breaking crude oil emulsion. Stable emulsions were formed using distilled water/crude oil and oil-water ratio was 4:6. The concentrations of CH particles ranging from 0.25, 0.5, 0.75, and 1% were added into vials containing the prepared emulsions and demulsification test was conducted inside the oven at 75 °C. Rheology was used to illustrate the demulsification mechanism of CH as potential demulsifiers. According to the experimental outcomes, the demulsification acti
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Issa, Roy J., and Emily M. Hunt. "Rheology of water-in-oil emulsions for a medium crude oil." In 2015 International Mediterranean Gas and Oil Conference (MedGO). IEEE, 2015. http://dx.doi.org/10.1109/medgo.2015.7330336.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Altowilib, Ali, Rahul Gajbhiye, Mohamed Mahmoud, and Theis Solling. "Selection and Optimization of Demulsifier Based on Physio-Chemical Characteristics of Emulsion." In Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213617-ms.

Повний текст джерела
Анотація:
Abstract The presence of crude oil/water emulsions is a burden in the petroleum industry. It leads to several operational and economic issues related to crude production, transportation, and refining processes. The stability of the emulsified oil is affected by water content, presence of organic/inorganic materials, formation brine salinity, and temperature. In reservoir fluid studies, applying chemical demulsifiers on emulsion samples is common to break the emulsion and reduce the water content to an acceptable level (less than 1 wt. %) to generate representative fluid composition results. Ho
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Hattori, Tokima, Xingjuan Hao, Mai Shimokawara, Yoshitake Kato, Ryuta Kitamura, and Yogarajah Elakneswaran. "Influence of Inorganic Solid Particles in the Formation and Stability of Crude Oil Emulsion." In International Petroleum Technology Conference. IPTC, 2023. http://dx.doi.org/10.2523/iptc-22863-ea.

Повний текст джерела
Анотація:
Abstract Water-in-oil (W/O) emulsion could be formed during the transportation, refining, and storage of crude oils. In the stockpiling tanks, the emulsion and sludge formation were observed by storing of crude oils for a long period of time and cleaning of tanks. It has been reported that the presence of solids affects the emulsion types as well as the stability of emulsions produced. In addition, the surface properties of inorganic particles could influence the crude oil/water interface and thus affect the crude oil-water emulsion stability. Therefore, in this study, the presence of inorgani
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!