Увійти

Готові списки джерел за темами / Polymer-abrasive tool

Зміст

Статті в журналах
Дисертації
Тези доповідей конференцій

Добірка наукової літератури з теми "Polymer-abrasive tool"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polymer-abrasive tool".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Polymer-abrasive tool"

1

Tamarkin, Mihail, Elina Tischenko, and Aleksey Verchenko. "Technological fundamentals of polymer-composite parts with flexible abrasive tool." Science intensive technologies in mechanical engineering, no. 8 (September 1, 2021): 25–34. http://dx.doi.org/10.30987/2223-4608-2021-8-25-34.

Повний текст джерела

Анотація:

There are presented investigation results of polymer-composite parts abrasion. The dependences for the definition of surface roughness at polymer-composite material hydro-abrasive cutting are shown. The results of theoretical and experimental investigations of hydro-abrasive cutting processes are presented. A procedure for their carrying out, tool and equipment used is described. The results of experimental investigations on polymer-composite parts preparation to splicing are shown. A procedure for designing a technological process of polymer-composite parts abrasion is offered.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Gruba, Oksana N., Irina V. Shmidt, and Anastasia E. Gorodkova. "Influence of the Parameters of Galvanomechanical Chromium Plating on the Coating Quality and Process Productivity." Solid State Phenomena 284 (October 2018): 1173–77. http://dx.doi.org/10.4028/www.scientific.net/ssp.284.1173.

Повний текст джерела

Анотація:

The article deals with the method of obtaining a hard chromium coating with using abrasive tool. The influence of the pressing force of the abrasive tool, the rotation speed of the part, the temperature of the electrolyte on the results of galvanomechanical chromium plating of rotating cylindrical parts has been studied. A special abrasive tool has been developed for use in the galvanic mechanical coating of metal parts. The tool is made on a polymer bond. The effect of the electrolyte temperature on the quality of the precipitated chromium is revealed.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kozhukhova, Aleksandra, Larisa Tolmacheva, Irina Dmitrieva, and Inessa Kalyakina. "The dependence of the performance of the process of finishing vibration processing on the shape of the abrasive tool (granules)." E3S Web of Conferences 175 (2020): 05002. http://dx.doi.org/10.1051/e3sconf/202017505002.

Повний текст джерела

Анотація:

The article presents the results of experimental studies of the influence of polymer abrasive granules shape on the surface roughness formation and metal removal during vibrational finishing and hardening treatment (VFHT). As is known, surface roughness and the amount of metal removal are affected by a number of factors: binder material, material and granularity of the abrasive, technological lubricant-coolant medium (LCM) type, loading mass, initial roughness, etc. Processing was carried out for 120 min on a UVG-4x10 vibrating machine, with a working chamber volume of 10 dm3. Metal removal Q

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Manovitsky, Oleksandr, Sergiy Klimenko, and Andriy Manokhin. "REPAIR OF THE WEAR OF THE MILLS WITH PNTM WHEN PROCESSING THE ABRASIVE POLYMERIC COMPOUND." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 2 (September 2, 2022): 3–6. http://dx.doi.org/10.20998/2079-004x.2022.2(6).01.

Повний текст джерела

Анотація:

In the article, the results of the analysis of wear and tear of face milling cutters, equipped with an abrasive polymer compound, which are composed of quartz fine-grained sand and epoxy-diane resin, are shown. It has been established that the prevailing mechanism of tool wear during the processing of such a composite is abrasive wear. The reliability of the characteristics of wear and tear resistance of the cutting tool in the form of a sharpness of cutting was assessed.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Tamarkin, M. A., Eh Eh Tishchenko, A. V. Verchenko, and V. M. Troitskii. "Formation of surface layer quality under abrasive treatment of polymer-composite materials." Advanced Engineering Research 20, no. 3 (2020): 235–42. http://dx.doi.org/10.23947/2687-1653-2020-20-3-235-242.

Повний текст джерела

Анотація:

Introduction. The study results of the abrasive processing of parts made of polymer-composite materials are presented. The features of processing polymer composites and the technology of preforming through waterjet cutting are described. The stages of preparation of a part made of polymer-composite material for the “glueing” operation are investigated.Materials and Methods. Dependences for determining the surface roughness under waterjet cutting of polymercomposite material are considered. Research is carried out to achieve the required surface roughness under adhesive bonding of workpieces. T

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Musiał, Janusz, Serhiy Horiashchenko, Robert Polasik, et al. "Abrasion Wear Resistance of Polymer Constructional Materials for Rapid Prototyping and Tool-Making Industry." Polymers 12, no. 4 (2020): 873. http://dx.doi.org/10.3390/polym12040873.

Повний текст джерела

Анотація:

The original test results of abrasive wear resistance of different type of construction polymer materials were presented and discussed in this article. Tests were made on an adapted test stand (surface grinder for form and finish grinding). Test samples were made of different types of polymer board materials including RenShape®, Cibatool® and phenolic cotton laminated plastic laminate (TCF). An original methodology based on a grinding experimental set-up of abrasion wear resistance of polymer construction materials was presented. Equations describing relations between material type and wear re

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Pavlo, Tryshyn, Honchar Natalia, Kondratiuk Eduard, and Stepanov Dmytro. "Development of technological restrictions when operating disc polymer-abrasive brushes." Eastern-European Journal of Enterprise Technologies 6, no. 1(108) (2020): 27–33. https://doi.org/10.15587/1729-4061.2020.212820.

Повний текст джерела

Анотація:

Polymer-abrasive brush rotating tools are increasingly used for finishing operations in automated manufacturing. Given this, studying the process of their fibers’ wear has become important; and such a type of wear as the detachment of a whole fiber at the point of fixing has not been investigated in detail up to now. This phenomenon can lead to the disruption of stable equipment operation and the catastrophic wear of brushes. Therefore, it is a relevant task to search for and identify those limitations that could prevent fibers from detachment. This study involved the disc and cylindrica

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Han, Sheng Chao, Yan Chen, Jiu Hua Xu, and Jing Wen Zhou. "Experimental Study of Tool Wear in Milling Multidirectional CFRP Laminates." Materials Science Forum 770 (October 2013): 276–80. http://dx.doi.org/10.4028/www.scientific.net/msf.770.276.

Повний текст джерела

Анотація:

This study aims to investigate the wear of coated end mills when milling Carbon fiber reinforced polymer (CFRP) composites. Four different types of end mills are used in the milling experiments to identify the influence of tool geometry and material on tool wear. Cutting forces and wear mechanisms of coated mills are also discussed. Through the contrast experiment, diamond coated multitooth router shows the best performance with the smallest cutting force and the least wear extent under the same cutting parameter. The major failure mechanisms of coated tools are breakthrough of coating, coatin

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Kapłonek, Wojciech, Krzysztof Nadolny, Krzysztof Rokosz, et al. "Internal Cylindrical Grinding Process of INCONEL® Alloy 600 Using Grinding Wheels with Sol–Gel Alumina and a Synthetic Organosilicon Polymer-Based Impregnate." Micromachines 11, no. 2 (2020): 115. http://dx.doi.org/10.3390/mi11020115.

Повний текст джерела

Анотація:

The development of modern jet engines would not be possible without dynamically developed nickel–chromium-based superalloys, such as INCONEL® The effective abrasive machining of above materials brings with it many problems and challenges, such as intensive clogging of the grinding wheel active surface (GWAS). This extremely unfavorable effect causes a reduction in the cutting ability of the abrasive tool as well as increase to grinding forces and friction in the whole process. The authors of this work demonstrate that introduction of a synthetic organosilicon polymer-based impregnating substan

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Тришин, Павло Романович, Наталя Вікторівна Гончар та Кирило Олександрович Терещенко. "АВТОМАТИЗАЦІЯ ФІНІШНОГО ОБРОБЛЕННЯ ПРЯМОКУТНИХ КУТОВИХ ХВИЛЕВОДІВ S-ДІАПАЗОНУ". Aerospace technic and technology, № 6 (27 листопада 2020): 45–53. http://dx.doi.org/10.32620/aktt.2020.6.05.

Повний текст джерела

Анотація:

Finishing of waveguides (sharp edges blunting, burrs removal, polishing of welding or soldering of the duct and flanges) is carried out in order to eliminate all surface damages that are formed from previous operations and give it the necessary roughness, which affects the amount of active power loss. In most cases of complex spatial shape rectangular waveguides with angled welded transitions, the finishing of the duct is performed manually or by means of small mechanization. An alternative to the finishing of waveguide duct is anode-abrasive vibration honing, abrasive-extrusion processing, pr

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Polymer-abrasive tool"

1

Внуков, Ю. Н., та Д. Н. Степанов. "Шероховатость поверхностей титановых образцов после обработки полимерно-абразивным инструментом". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11261.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Степанов, Д. Н. "Повышение качества финишной обработки сложнопрофильных деталей, изготовленных из различных материалов, и ее механизация при помощи щеточных полимерно-абразивных инструментов". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38142.

Повний текст джерела

Анотація:

В настоящее время одной из проблем машиностроительного производства является повышение качества и производительности финишного этапа изготовления деталей. Особенные трудности вызывают сложнопрофильные детали, требующие точного позиционирования инструмента по отношению к обрабатываемой поверхности, и тонкостенные детали, которые нельзя подвергать высокому силовому давлению. Финишная обработка таких деталей вызывает необходимость применения или дорогостоящего специального оборудования, или ручного труда различной степени тяжести, который к тому же является продолжительным и монотонным, и требует

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Du, Chih-wei, and 杜致緯. "Studies on the electrochemical abrasive polishing of cylindrical rod using a conductive polymer tool." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/5gy558.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>102<br>In this study, a carbon-fiber-type non-directional conductive polymer (ESD 410C) was employed as a tool electrode to compositely electrolyze and abrasive polish the cylindrical surface of stainless steel workpiece using a horizontal electrochemical abrasive polishing machine self-developed. The effects of alumina abrasive particle size (1 ~ 9 μm), load (0.015 ~ 0.15 N), current (0 ~ 300 mA) and polishing time (0 ~ 10 min) on the surface roughness of workpiece were investigated. Experimental results of abrasive polishing showed that the surface roughness R

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Lee, Yu, and 李昱. "Studies of Electrochemical Abrasive Polishing on the Cylindrical Surface of Aluminum Using Conductive Polymer Tool." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/25514026468869412924.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>104<br>Pure aluminum is often applied in various advanced industry due to its excellent mechanical properties. Two polishing methods are usually used, including chemical polishing and electro-polishing, but the solutions used by them are generally toxic and not recyclable. In this study, a non-toxic electrolyte is used to conduct the electrolytic polishing and the composite electrolytic abrasive polishing. In the electrolytic experiments for aluminum plate, the phosphoric acid and ethanol solution is the optimal electrolyte to obtain the best surface roughness.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Hung, Wei-Kang, and 洪維綱. "Studies of Electrochemical Abrasive Polishing on Inner Surface of Alloy Steel using a Conductive Polymer Tool." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/43919398149790886408.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>103<br>In this study, a horizontal machining was employed to compositely electrolytic-abrasive polish the inner surface of Cr-Mo alloy steel, where a carbon-fiber-type non-directional conductive polymer (ESD 410C) as a tool electrode and alumina (Al2O3) as abrasives with sodium sulfate as the electrolyte. Effects of grit size (1, 3, 5 µm), load (0.05, 0.15, 0.25 N), and current (0 ~ 300 mA) on the surface roughness of workpiece were investigated. Experimental results of abrasive polishing with non-feeding condition showed that the surface roughness Rmax and Ra w

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Chuang, Yi-ting, and 莊貽婷. "Studies on Electrolytic Abrasive Polishing of Square Inner Surface of Die Steel Using Conductive Polymer Tool." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/j29c36.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>106<br>In this study, a square shape of conductive polymer (ESD 410C) was employed as a tool electrode to electrolytic abrasive polishing the inner surface of SKD61 steel with the square hole 12 and 8 mm in length using a polishing machine with multi-axis motions. Experiments were carried out to understand effects of the alumina abrasive particle size (3, 1, and 0.3 μm), load (0.3 ~ 0.5 N), current (0 ~ 200 mA) and polishing time (0 ~ 8 min) on the surface roughness of the polished surface. In the abrasive polishing under a load of 0.4 N and the abrasive size of

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Chen, Jin-Qian, and 陳晉虔. "Studies on Electrolytic Composite Abrasive Polishing of Cylindrical Surface Using Conductive Polymer Tool with Self-electrolytic Dressing." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/2a373p.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>107<br>When the round rod workpiece of SUS 304 stainless steel is polished, it causes problems with residual microchips of metal on the tool surface. In order to solve these problems, composite electrolytic abrasive polishing machine with self-electrolytic dressing is designed and fabricated. Effects of load (0.05 N~0.25 N), abrasive particle size (1~3 μm), current (0~300 mA), NaNO3 electrolyte concentration (0~40 wt.%), dressing current (0~600 mA) and processing time (0~10 min) on the surface roughness of workpiece are investigated. In the electrolyti

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Lee, Chih-hung, and 李智弘. "Studies of Electrochemical Abrasive Polishing on the Inner Surface of Hole of Die Steel Using Conductive Polymer Tool." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/30042849163134653098.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>104<br>Abstract In this study, a conductive polymer (ESD 410C) was employed as a tool electrode to compositely electrolyze and abrasive polish the inner surface of workpiece made of SKD61 die steel using a polishing machine with multi-axis motions. The effects of tool electrode shape (cylindrical and square thread), alumina abrasive particle size (3, 1, and 0.3 μm), load (0.1 ~ 0.5 N), current (0 ~ 600 mA), and polishing time (0 ~ 10 min) on the inner surface roughness of workpiece were investigated. In the electrolytic polishing, the decreased rate of surface r

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Polymer-abrasive tool"

1

Beamish, Michael, and William Corbett. "Correlating Qualitative Surface Profile Assessment Methods to Quantitative Methodology on Prepared Concrete." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17606.

Повний текст джерела

Анотація:

Abstract Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive blast cleaning, acid etching, or various impact/scarifying power tools. The resulting surface profile depth can influence coating/lining adhesion and performance. Coating/lining manufacturers and/or facility owners frequently specify cleaning and roughening of the concrete surface prior to product installation. The surface profile (r

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Podashev, D. "Control of Deformation of Elastic Polymer-Abrasive Circles at their Wear." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-58.

Повний текст джерела

Анотація:

Abstract. The article is devoted to the study of the wear intensity of elastic polymer-abrasive circles when processing the surfaces of parts made of high-strength aluminum alloys. Empirical dependencies of wear on cutting speed and tool deformation are obtained, on the basis of which method of tool deformation correction with long-term, continuous surface treatment is proposed. In practice, such a procedure is necessary due to the loss of process performance that occurs due to the reduction of tool deformation due to wear. The proposed technique allows to effectively control the finishing pro

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Barone, D., G. Stanziale, A. Lamarina, et al. "Successful Deployment of Combined Mechanical and Chemical Solutions Enabled by Real-Time Coiled Tubing Services to Address Watered Out Well in Southern Europe." In ADIPEC. SPE, 2024. http://dx.doi.org/10.2118/222482-ms.

Повний текст джерела

Анотація:

Abstract An innovative intervention strategy is discussed, which was designed to enhance precision and reliability and optimize the performance of a well plagued by excessive water production. Through the unique combination of a mechanical tool, custom chemistry, and state-of-the-art real-time technology, the operator successfully isolated the old, completely watered-out zone and opened a new layer to deliver sustained oil production with 0% water cut (WC). This well presented several challenges; the main one was to ensure effective and reliable isolation of old layers, both inside and outside

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Yudin, A., M. Dawoud, W. Arshad, et al. "Addressing Multiple Challenges of Hydraulic Fracturing in HPHT Sandstone Reservoirs. A Case Study from Saudi Arabia." In SPE Conference at Oman Petroleum & Energy Show. SPE, 2025. https://doi.org/10.2118/224877-ms.

Повний текст джерела

Анотація:

Abstract Hydraulic fracturing in tight and deep gas formations presents significant challenges, particularly when near-wellbore stresses reduce injectivity. Drilling fluids can exacerbate near-wellbore damage, increasing rock breakdown limits alongside high local stresses. This study aimed to identify the main contributing factors and propose a comprehensive workflow to minimize occurrences and non-productive time (NPT) associated with these challenges. It also addressed the optimization of fracturing fluid design based on tubulars and formation cool-down effects. The study was based on statis

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ghoshal, Abhishek, Adnan Khan, Moosa Zahid, Salman Pervaiz, and Sathish Kannan. "Reviewing Machinability of Fibre-Reinforced Polymer (FRP)/Metallic Stacks Using MQL." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10961.

Повний текст джерела

Анотація:

Abstract Minimum quantity lubrication (MQL) assisted techniques are gaining popularity because of their lower environmental impact and cost effectiveness. Fibre reinforced polymers (FRP) are mainly utilized in the aerospace and automotive sectors, because of their high strength-to-weight ratio, low coefficient of thermal expansion, high corrosion resistance, high modulus to weight ratio and improved tensile strength. Besides that, they are extremely light weight and suitable for structural applications. For fibre reinforced polymers (FRP) composites, all of these properties in combination prov

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!