Дисертації з теми "Process developpement"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-26 дисертацій для дослідження на тему "Process developpement".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Houbloss, Samir. "Detection thermique de l'absorption optique : developpement de la technique, informatisation, etudes d'elements 3d dans des materiaux iii-v." Clermont-Ferrand 2, 1988. http://www.theses.fr/1988CLF21078.
Evina, Obam Richard. "La politique fiscale au Cameroun : étude sur l'exercice de la compétence fiscale des Etats depuis la décennie 1980." Thesis, Aix-Marseille, 2014. http://www.theses.fr/2014AIXM1034/document.
Against the backdrop of the conceptual uniqueness of the tax policy implemented by the government, lies a genuine fragmentation of fiscal decision-making sources. The State organ ultimately responsible for tax policy choices actually bears the laborious compromise built on trading of choices between public and private stakeholders at national and international levels. The State of Cameroon which, since independence in 1960, has been the keystone of the whole political edifice, and the initiator of tax-related decisions, is witnessing an adjustment in its unique structure national level due to the combined effect of political democratization and economic crisis. Its erstwhile monopoly in the production of fiscal choices is being fragmented due to the increasingly assertive international scope of tax-related issues. In short, the State's tax jurisdiction is shifting from decision-making monopoly to shared decision-making prerogatives integrating national constraints and requirements at international level. Understanding fiscal policy becomes a central issue in the State's new role of implementing the social contract. The new challenge for the State in the post-modern environment is to enhance its ability to continue to ensure the conceptual uniqueness of the fiscal decision-making process despite the turbulence of the internal order and international society. It is the advent of a smart State bringing together stakeholders involved in the construction of a fiscal order
Stief, Paul. "Contribution à la co-conception de produits et de leurs systèmes de production reconfigurables." Thesis, Paris, HESAM, 2020. http://www.theses.fr/2020HESAE016.
The focus of this research work is on proposing a joint analysis of product design and assembly process that analyses the product similarity in terms of design and assembly technology similarity to group them into families. For these product families, a new architectural design approach for their assembly system is presented based on components used to locate subassemblies during the assembly operations. It allows the production system to be redesigned based on locating sequences, locating scheduling and compatible locating schemes for a multi-product assembly. This approach is used to design reconfigurable production systems and to identify relevant opportunities for new multi-product systems. The proposed method is evaluated by case studies in cooperation with the industrial partner
Deblonde, Gauthier. "Spéciation du niobium et du tantale en milieux basiques et développement d’un procédé hydrométallurgique pour la séparation niobium-tantale." Thesis, Paris 6, 2015. http://www.theses.fr/2015PA066761.
Niobium (Nb) and tantalum (Ta) are two strategic elements for developed countries because of their unequalled properties and their use in several key sectors like the aerospace, fuel, building, nuclear, medical imaging or electronic industries. Due to their almost-identical chemical properties, the industrial processes currently used for the niobium-tantalum separation require strongly complexing media, like hydrofluoric acid. However, the high toxicity and the environmental footprint of these media force the industrials to develop new processes. In this regard, alkaline media represent a good alternative but the chemistry of Nb and Ta in such media is still poorly known. The objectives of this PhD thesis were to probe the speciation of Nb and Ta in alkaline aqueous solutions and to develop a new hydrometallurgical process able to perform the Nb-Ta separation. Firstly, new data were obtained on the speciation of Nb and Ta in alkaline media based on solubility measurements, UV-visible spectrophotometry, solid state NMR, Raman spectroscopy and capillary electrophoresis. Secondly, the information obtained from aqueous solutions (both synthetic and industrial) allowed us to develop an original solvent extraction process able to separate Nb and Ta without using any fluoride compound. This innovative process was tested at a pilot-scale (~ 1 L/h) on industrial solutions. The technical-economic evaluation of the developed process shows that this latter is profitable and economically competitive over the current industrial processes
Jaeger, Marc. "Representation et simulation de croissance des vegetaux." Université Louis Pasteur (Strasbourg) (1971-2008), 1987. http://www.theses.fr/1987STR13224.
Charbonnier, Sylvie. "Contribution de l'automatique au developpement d'un procede de production d'enzymes : modelisation, estimation, commande." Grenoble INPG, 1994. http://www.theses.fr/1994INPG0125.
Briantais, Alain Molinari A. "DEVELOPPEMENT DU PROCEDE DE FORMAGE DE PRECISION D'ELEMENTS DE DENTURE POUR BOITE DE VITESSES /." [S.l.] : [s.n.], 1996. ftp://ftp.scd.univ-metz.fr/pub/Theses/1996/Briantais.Alain.SMZ9644.pdf.
GUILLAUME, LIVROZET PASCALE. "Etude et developpement de procedes optiques de metrologie tridimensionnelle submicrometrique, appliques a la microelectronique." Besançon, 1990. http://www.theses.fr/1990BESA2052.
Pes, Salvatore. "Nanostructures-based 1.55 μm-emitting Vertical-(External)-Cavity Surface-Emitting Lasers for microwave photonics and coherent communications". Thesis, Rennes, INSA, 2019. https://tel.archives-ouvertes.fr/tel-02892844.
The work presented in this dissertation focus on the development of InP-based semiconductor vertical-cavity lasers, based on quantum nanostructures and emitting at the telecom wavelengths (1550-1600 nm). A new technological process for the realization of compact VCSELs is described. This process (named TSHEC) has been employed to realize optically-pumped VCSELs, integrated onto a host Silicon platform, with good performances. The same process has been adapted to develop an electrically-driven version of VCSELs: a preliminary study of the confinement section based on a InGaAs-BTJ is presented, together with the development of a mask set. Thanks to the development of the liquid crystals μ-cell technology (in collaboration with LAAS, IMT Atlantique et C2N), we realized a tunable photodiode at 1.55 μm, and a tunable VCSEL is currently under development. This work also presents the first realization of a 1.6 μm- emitting optically-pumped quantum dashes-based VECSELs, and its characterization in multi-mode and single-frequency regime. Finally, the realization of an experimental setup for the investigation of the coupling between two orthogonal eigenstates of a bi- frequency 1.54 μm-emitting SQW-VECSEL has been conceived and realized. This setup, which allowed the direct quantification of the coupling constant on such a device, in the near future will allow performing the same study on anisotropic structures like quantum dashes or quantum dots, with the objective of studying the inhomogeneous broadening effect observed in these gain regions
BELL, FERDINAND. "Developpement et caracterisation des procedes de gravure de la grille en polysilicium dans une source plasma haute densite." Nantes, 1996. http://www.theses.fr/1996NANT2018.
RIZKALLAH, CHARLES. "Developpement et mise en uvre d'un systeme de conduite avancee pour le procede de compactage isostatique a chaud." Paris 13, 1999. http://www.theses.fr/1999PA132047.
SCHUHLER, ELISABETH. "Planification experimentale, application au developpement et a l'optimisation de procedes de production de concentres de proteines plasmatiques humaines." Université Louis Pasteur (Strasbourg) (1971-2008), 1997. http://www.theses.fr/1997STR13251.
BUSCARLET, FOURNIER LAURE. "Dosage immunometrique du 17-estradiol : nouveaux developpements du procede spie-ia et application a l'automate vidas." Paris 6, 2000. http://www.theses.fr/2000PA066083.
Dumeignil, Franck. "CATALYSE ET ENVIRONNEMENT : DEVELOPPEMENT ET AMELIORATION DE PROCEDES D'HDN & HDS / ETUDE DU COMPORTEMENT DES PHASES ACTIVES IN SITU." Habilitation à diriger des recherches, Université des Sciences et Technologie de Lille - Lille I, 2005. http://tel.archives-ouvertes.fr/tel-00098387.
Dans ce contexte, les travaux de recherche effectués en France et au Japon présentés dans cet exposé portent essentiellement sur l'amélioration des procédés de désulfuration/déazotation des coupes pétrolières. En outre, des travaux de recherche plus récemment entamés constituent une ouverture vers le développement des nouvelles technologies en rapport avec l'utilisation de l'hydrogène comme nouveau vecteur d'énergie du 21ème siècle.
De nouvelles techniques de caractérisation in situ des phases actives ont été mises au point afin d'avoir une meilleure connaissance des modes de fonctionnement des catalyseurs d'hydrotraitement, ce qui a permis de mieux cibler les stratégies à mettre en œuvre pour leur amélioration. Les catalyseurs d'hydrotraitement ont été améliorés grâce à l'utilisation de nouveaux supports pour les phases actives conventionnelles à base de MoS2. De plus, les performances de nouvelles phases actives à base de métaux nobles ont aussi été évaluées. Enfin, de nouvelles technologies de purification de ces coupes pétrolières à basse consommation d'énergie ont été développées, i) la biodéazotation à l'aide d'une nouvelle bactérie, et ii) l'oxy-désulfuration/oxy-déazotation, lesquelles se sont montrées particulièrement efficaces.
Par ailleurs pour répondre à la demande croissante d'hydrogène tout en valorisant des déchets particulièrement réfractaires aux procédés de recyclage, un procédé de production d'hydrogène par réformage à la vapeur de déchets de PVC est en cours d'élaboration. Parallèlement, nous tentons actuellement de comprendre le mode de stockage/déstockage de l'hydrogène dans les oxydes mixtes (technologie propre au LCL) à l'aide de diverses techniques de caractérisations physico-chimiques.
Coureau, Hélène. "Etude et developpement de systemes de conduite de procedes chimiques a l'echelle du laboratoire. Mise au point de l'interface utilisateur." Paris 6, 1992. http://www.theses.fr/1992PA066423.
Marinel, Sylvain. "Interactions micro-onde / matiere. Applications au developpement du procede de texturation de supraconducteurs du type (tr)ba 2cu 3o 7 -." Caen, 1999. http://www.theses.fr/1999CAEN2039.
Sperandio, Mathieu. "Developpement d'une procedure de compartimentation d'une eau residuaire urbaine et application a la modelisation dynamique de procedes a boues activees." Toulouse, INSA, 1998. http://www.theses.fr/1998ISAT0033.
GRAF, HUGUES. "Etude et developpement de procedes de purification des anticorps monoclonaux pouvant etre integres aux systemes de culture a haute densite." Université Louis Pasteur (Strasbourg) (1971-2008), 1992. http://www.theses.fr/1992STR13076.
VIALLET, Benoit. "Conception d'un amplificateur optique a 1.3 um: spectroscopie de couches minces de LaF3 dope Nd3+ et developpement de procedes technologiques innovants." Phd thesis, Université Paul Sabatier - Toulouse III, 2004. http://tel.archives-ouvertes.fr/tel-00009326.
Ferrasse, Jean-Henry. "Developpement d'outils experimentaux pour le dimensionnement de procedes de sechage conductif avec agitation : application a des boues de stations d'epuration urbaines." Toulouse 3, 2000. http://www.theses.fr/2000TOU30095.
Terral, François. "Aide a la conception de logiciels de supervision de procedes industriels." Toulouse, INSA, 1991. http://www.theses.fr/1991ISAT0025.
DENIAU, HELENE, and Jacques Amouroux. "Developpement de la spectrofluorimetrie laser a resolution temporelle pour le controle en ligne de l'uranium dans les solutions du procede de retraitement purex." Paris 6, 1992. http://www.theses.fr/1992PA066655.
ARNOLD, MICKAEL. "Methodologies d'experimentations et automatisation en developpement chimique. Implication dans la maitrise de la qualite des procedes de fabrication des principes actifs de medicaments." Paris 6, 1999. http://www.theses.fr/1999PA066681.
DE, ALMEIDA MANUEL. "Etude et developpement d'une methode de simulation pour l'estimation des variations des performances des portes logiques cmos a partir de l'analyse des fluctuations des procedes de fabrication." Paris 11, 1997. http://www.theses.fr/1997PA112217.
PERION, JEAN-BAPTISTE. "Methode d'identification atomique non-destructive par analyse de l'attenuation d'un rayonnement a spectre etendu. Developpement de la methode en tant que procede d'imagerie x dans la plage 20-150kev." Paris 7, 1993. http://www.theses.fr/1993PA077291.
Amary, Pascal. "Developpement, optimisation et industrialisation d'un instrument de controle, en temps reel et in-situ, des procedes de depot et de gravure en micro-electronique : un ellipsometre a modulation de polarisation." Orléans, 1991. http://www.theses.fr/1991ORLE2004.