Готові списки джерел за темами / Process of Suspension

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Process of Suspension"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Process of Suspension".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Process of Suspension"

Tuntarawongsa, Sarun, and Thawatchai Phaechamud. "Homogenization and Melt-Emulsification Techniques for Ibuprofen Particle Size Reduction: Effect of Tween 80 & Sonication." Applied Mechanics and Materials 229-231 (November 2012): 179–82. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.179.

Повний текст джерела

Анотація:

Ibuprofen suspensions were prepared by simple homogenization with melt-emulsification process. Tween 80 was used as stabilizer. The homogenized suspensions were evaluated and compared with melt emulsificated suspension. The pH value and rheology behavior were not difference. The viscosity was very low. Zeta potential was -10 to -25 mV. In this study, the suitable process to minimize particle size of ibuprofen suspension was melt emulsification follow by sonication. This process could be developed to obtain nanosuspension by adjust sonication process and improved formulation to obtain suitable

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu, Pengyun, Guohui Meng, Guijie Liu, Thomas Coyle, Larry Pershin, and Javad Mostaghimi. "Columnar-structured thermal barrier coatings deposited via the water-based suspension plasma spray process." Journal of Physics D: Applied Physics 55, no. 20 (2022): 204001. http://dx.doi.org/10.1088/1361-6463/ac4721.

Повний текст джерела

Анотація:

Abstract Suspension plasma spray (SPS) has been developed as a rapid, facile and cost-effective process to deposit columnar-structured thermal barrier coatings (TBCs). In contrast to the most commonly used ethanol-based suspensions, water-based suspensions have not been used in the SPS process to deposit columnar-structured TBCs due to their high surface tension, although they are much cheaper and safer. In this work, a new water-based SPS process was prepared by adding surfactant to lower the surface tension. The optimum content of dispersant and surfactant added to the suspension was determi

Стилі APA, Harvard, Vancouver, ISO та ін.

Mahabadi, Hadi K., and Denise Wright. "Semi-suspension polymerization process." Macromolecular Symposia 111, no. 1 (1996): 133–46. http://dx.doi.org/10.1002/masy.19961110114.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tang, Ai Hua, Jian Ping Tian, and Xiao Xu Liu. "Kinematics Characteristic Analysis and Structural Parameter Optimization of Twist Beam Rear Suspension." Advanced Materials Research 201-203 (February 2011): 1710–13. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1710.

Повний текст джерела

Анотація:

The multi-body dynamics analysis is an important method to analyze the movement and dynamics characteristics of a car in modern vehicle design process . The twist beam rear suspension which is for rear wheel steering was widely equipped on front engine rear wheel drive vehicles . The modeling of twist beam rear suspensions is always difficult to describe accurately for its unique structural behaviour . First of all , a non-linear method based on multi-body dynamics was used to establish the dynamics model of the twist beam rear suspension system by using the ADAMS/Car . Secondly, the kinematic

Стилі APA, Harvard, Vancouver, ISO та ін.

Dongping, Li, Liang Wei, Peng Chunyang, and Gan ke. "Construction process of "finished cable" suspension and suspension cables." Prestress Technology 6, no. 04 (2002): 2–7. http://dx.doi.org/10.59238/j.pt.2002.04.001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Anjum, Fatima, Maximilian Wessner, and Gabriele Sadowski. "Membrane-Based Solvent Exchange Process for Purification of API Crystal Suspensions." Membranes 13, no. 3 (2023): 263. http://dx.doi.org/10.3390/membranes13030263.

Повний текст джерела

Анотація:

Bottom-up approaches to producing aqueous crystal suspensions of active pharmaceutical ingredients (APIs), such as anti-solvent crystallisation, are gaining interest as they offer better control over surface properties compared to top-down approaches. However, one of the major challenges that needs to be addressed is the removal of organic solvents after the crystallisation step due to strict limitations regarding human exposure. Within this work, we investigated a process concept for the removal of solvent (i.e., ethanol) from the API crystal suspension using membrane-based diafiltration. A f

Стилі APA, Harvard, Vancouver, ISO та ін.

Troshen'kin, B. A., O. V. Kravchenko, and V. B. Troshen'kin. "IMPROVEMENT OF THE PROCESS OF OBTAINING THE HYDROGEN BY USING SODIUM BOROHYDRIDE." Thermophysics and Thermal Power Engineering 46, no. 1 (2024): 53–57. https://doi.org/10.31472/ttpe.1.2024.7.

Повний текст джерела

Анотація:

The process of hydrogen obtaining by hydrolysis of a suspension of sodium borohydride (NaBH4) in mineral oil has been developed, which, in combination with fuel cells, is intended for use in power plants of unmanned aerial vehicles (UMAVs). The created process allows to avoid a possible UMAVs explosion in the event of using the previously developed sodium borohydride hydrolysis process stabilized with caustic soda solution. A comparison of the characteristics of these two technological processes is given. For the alkaline process during the use of a capacitive reactor, the calculation method i

Стилі APA, Harvard, Vancouver, ISO та ін.

Rakhmankulova, Barna, Sayibdjan Mirzaev, and Mazhid Yusupov. "Numerical simulation of tasks of vertical viscoelastic oscillation of suspension systems of frame, engine, cabin and seat." E3S Web of Conferences 365 (2023): 01007. http://dx.doi.org/10.1051/e3sconf/202336501007.

Повний текст джерела

Анотація:

The analysis of the structures of the springing systems of modern vehicles showed that polymer composites are used in vehicles for which the decrease in curb weight is a critical indicator. The use of springs (suspensions) from polymer composites makes it possible to reduce the weight of the elastic element and increase durability while improving the smoothness of movement, reducing noise, and increasing traffic safety. When replacing the steel suspension with a polymer composite suspension, the mass of unsprung parts of the car decreases, and the economic performance of wheeled vehicles impro

Стилі APA, Harvard, Vancouver, ISO та ін.

Oliinyk, Tetiana, Dmytro Rumnytskyi, and Liudmyla Skliar. "Determination of the influence of pulp viscosity on the enrichment process of magnetite suspensions in screw separators." Technology audit and production reserves 1, no. 3(81) (2025): 6–18. https://doi.org/10.15587/2706-5448.2025.323268.

Повний текст джерела

Анотація:

The object of research is the process of enrichment of magnetite suspensions in screw separators, taking into account the particle size distribution, the compressibility of the liquid in the interparticle space, and the shape of the particles, which allows to assess the influence of these factors on the value of the effective viscosity of the suspension. The viscosity of the suspension is one of the properties for ore suspensions with a wide range of particle sizes and different concentrations of solids in operations and products. It determines the nature of the movement of the liquid, the sta

Стилі APA, Harvard, Vancouver, ISO та ін.

Moravec, Jiří, Tomáš Jirout, František Rieger, and Lukáš Krátký. "Mixing system for highly concentrated fine-grained suspensions." Polish Journal of Chemical Technology 11, no. 4 (2009): 52–56. http://dx.doi.org/10.2478/v10026-009-0043-9.

Повний текст джерела

Анотація:

Mixing system for highly concentrated fine-grained suspensions The mixing equipment for highly concentrated fine-grained suspensions must be designed differently from the equipment in which a suspension with a low concentration of the solid phase or bigger particles is mixed. It is due to the different rheological properties of the suspensions. In this work we are trying to find a suitable mixing system for a highly concentrated fine-grained suspension. The aim was to determine an effect of particular geometrical parameters of the tested mixing systems on a suspension process, especially from

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Process of Suspension"

Grigor, Charles Miller. "Suspension in the disciplinary process." Thesis, Nelson Mandela Metropolitan University, 2013. http://hdl.handle.net/10948/d1020966.

Повний текст джерела

Анотація:

Employers often wrestle with whether or not to suspend an employee and the issue is what needs to be done before an employee could be suspended. Suspending an employee means to deprive him or her from entering the work place for a period of time, due to alleged misconduct which, due to the nature of the alleged misconduct and in the opinion of the employer, warrants the employee not to be in or near the workplace. Section 23 of the Constitution of the Republic of South Africa, affords every employee the right to fair labour practices and this right should be affected by the Labour Relations Ac

Стилі APA, Harvard, Vancouver, ISO та ін.

Leary, Jerome J. "Process monitoring and fault diagnosis methods using constraint suspension." Thesis, University of Sussex, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.481837.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lobry, Emeline. "Batch to continuous vinyl chloride suspension polymerization process : a feasibility study." Phd thesis, Toulouse, INPT, 2012. http://oatao.univ-toulouse.fr/11498/1/lobry.pdf.

Повний текст джерела

Анотація:

Continuous processes present the benefit to be safer and more cost saving than batch processes. Many researches have been carried out in fine chemistry but few contributions refer to polymerization. We focus on the vinyl chloride suspension polymerization. This process has been extensively studied in batch with lots of improvement regarding the formulation and the technologies. This polymerization process is highly complex due to the toxic nature of the monomer, the good manage of heat transfer and stirring. Moreover the reaction step remains the only batch step of the PVC production. Accordin

Стилі APA, Harvard, Vancouver, ISO та ін.

Schmidt, Eric Andrew. "Characterizaton of a fiber suspesion jet in a co-flow dilution process." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/7090.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schmidt, Eric Andrew. "Characterization of a fiber suspension jet in a co-flow dilution process." Available online, Georgia Institute of Technology, 2005, 2003. http://etd.gatech.edu/theses/available/ipstetd-1047/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

De, la Flor Puccinelli Nicolas. "Consolidation and suspension: procedural mechanisms for party arbitration and multiple contracts." THĒMIS-Revista de Derecho, 2018. http://repositorio.pucp.edu.pe/index/handle/123456789/123851.

Повний текст джерела

Анотація:

The commercial operations of the modern world are complex and often present a series of equally sophisticated disputes. The old contractual models and their remedies are not sufficient to cover the current dynamics, this is the case of related operations that require efficient tools for their solution.In this context, the author develops a series of techniques or mechanisms for the efficient and effective solution of the identified problems, consolidation and suspension. It proposes that these mechanisms respond to the contractual mechanics of the current trade, which involves a series of intr

Стилі APA, Harvard, Vancouver, ISO та ін.

Normandin, Mélanie. "Étude sur la clarification d'une suspension de boue rouge et de liqueur Bayer par floculation /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2005. http://theses.uqac.ca.

Повний текст джерела

Анотація:

Thèse (M.Eng.) -- Université du Québec à Chicoutimi, 2005.<br>La p. de t. porte en outre: Mémoire présenté à l'Université du Québec à Chicoutimi comme exigence partielle de la maîtrise en ingénierie. CaQQUQ Bibliogr.: f. 128-131. Document électronique également accessible en format PDF. CaQQUQ

Стилі APA, Harvard, Vancouver, ISO та ін.

Paradza, Nobert. "An investigation into the suspension, attrition and breakage of nickel crystals during the nickel reduction process." Master's thesis, University of Cape Town, 2011. http://hdl.handle.net/11427/10854.

Повний текст джерела

Анотація:

Includes abstract.<br>Includes bibliographical references (leaves 70-74).<br>The aim of this study was to characterize the different impeller speeds required for suspension, attrition and breakage of nickel crystals in an autoclave.

Стилі APA, Harvard, Vancouver, ISO та ін.

Tontrup, Christoph. "Granulométrie de particules fines en suspension chargée par mesures de rétrodiffusion de la lumière‎. Application à l'étude de l'agglomération d'une suspension de dioxyde de titane en cuve agitée." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 1999. http://tel.archives-ouvertes.fr/tel-00836784.

Повний текст джерела

Анотація:

La première partie de ce travail est consacrée au développement d'un capteur granulométrique exploitant la rétrodiffusion de la lumière. L'intensité de la lumière rétrodiffusée est mesurée sur une large gamme de diamètre de particules (0,2 à 56 µm), indice de réfraction relatif <i>m</i> (1,09 à 1,94) et fraction volumique de solide Φ (10<sup>-6</sup> à 0,5). Les résultats expérimentaux sont comparés à trois approches théoriques : la méthode de rétrodiffusion simple qui décrit la rétrodiffusion dans des suspensions peu chargées, l'approximation de diffusion de la théorie du transfert radiatif q

Стилі APA, Harvard, Vancouver, ISO та ін.

Masy, Jean-Claude. "Agglomération d'un solide divisé en suspension dans un milieu liquide." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 1991. http://tel.archives-ouvertes.fr/tel-00844676.

Повний текст джерела

Анотація:

Cette étude a été consacrée à l'analyse du processus d'agglomération du sulfate de potassium et de l'alumine dans un milieu liquide turbulent. La turbidité constitue une technique tout à fait adaptée à la caractérisation de l'agglomération dont les effets sont ressentis essentiellement au niveau de la distribution granulométrique de la phase dispersée. Elle permet de quantifier et d'interpréter l'effet des différents paramètres qui interviennent au cours du développement du processus: - Paramètres hydrodynamiques : La cinétique d'agglomération est conditionnée par le mécanisme de rencontre des

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Process of Suspension"

Emmert, David J. Pupil due process and discipline. Indiana School Boards Association, 1987.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

United States. Government Accountability Office. Federal procurement: Additional data reporting could improve the suspension and debarment process : report to congressional committees. Govt. Accountability Office, 2005.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dittenhoffer, Tony. The suspension and revocation process in Canada: A study of how and why federal inmates under conditional release are returned to imprisonment. Solicitor General Canada, Ministry Secretariat, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Canada. Solicitor General of Canada. The suspension and revocation process in Canada: A study of how and why federal inmates under conditional release are returned to imprisonment. Department of the Solicitor General, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Funk, James E., and Dennis R. Dinger. Predictive Process Control of Crowded Particulate Suspensions. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Vitale, Gustavo. Suspensión del proceso penal a prueba. 2nd ed. Del Puerto, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cadavid, Leonel Calderon. Suspensión y terminación del proceso penal. Biblioteca Juridica, DIKE, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Räsänen, Erkki. Modelling ion exchange and flow in pulp suspensions. VTT Technical Research Centre of Finland, 2003.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Aguilar, Rosaura García. La suspensión del proceso a prueba en materia penal. Investigaciones Jurídicas, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Process of Suspension"

Nguyen, Huu Huy Phuc, and Atsunori Matsuda. "Suspension Process." In Next Generation Batteries. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6668-8_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hosseinabadi, Navid, and Hossein Ali Dehghanian. "The Suspension Aspect of Suspension Plasma Spray Process (SPS)." In Suspension Plasma Spray Coating of Advanced Ceramics. CRC Press, 2022. http://dx.doi.org/10.1201/9781003285014-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Auernhammer, Günter K., Doris Vollmer, Miao Wang, Marcel Roth, and Maria D’Acunzi. "Aggregation and Deformation Induced Reorganisation of Colloidal Suspension." In Colloid Process Engineering. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15129-8_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Bowen, Ming Zhang, and Yunbo Zhou. "Kalman Filter-based Vibration State Estimation and Optimal Control of a Special Vehicle." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_51.

Повний текст джерела

Анотація:

AbstractTake a certain type of special vehicle as the research object, establish the four-degree-of-freedom suspension vibration time-domain simulation model of the semi-vehicle, and use the Kalman filter algorithm for the vibration state of the vehicle in the driving process. By designing the Kalman observer of the linear suspension system, the state estimation of the vertical displacement and vertical acceleration of the front and rear suspensions and the body of the vehicle travelling on the uneven road surface is carried out, and the simulation analysis of the estimation effect is carried

Стилі APA, Harvard, Vancouver, ISO та ін.

Funk, James E., and Dennis R. Dinger. "True Particle Density and Suspension Specific Gravity." In Predictive Process Control of Crowded Particulate Suspensions. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0_39.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kowalski, Włodzimierz P., Marian Banaś, Krzysztof Kołodziejczyk, and Tymoteusz Turlej. "Intensification the Sedimentation Process of Coal Suspension." In XVIII International Coal Preparation Congress. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-40943-6_129.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Man, Xianhui, Yingjia Wang, and Yanan Yi. "Research on the Installation Plan of Stiffening Beam and Bridge Deck for Single Tower and Single Span Steel Truss Suspension Bridge." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_40.

Повний текст джерела

Анотація:

AbstractTaking a certain super large bridge with a main span of 256 m as the engineering background, the construction sequence of the stiffening beam and bridge deck of a single tower and single span steel truss suspension bridge was studied. The results show that different construction sequences of stiffening beams and bridge decks have a significant impact on the stress of stiffening beam members and suspension rods. Through simulation analysis, it is found that the stiffening beam of the bridge is lifted from the beam end to the B6 closure section, and the construction sequence of the bridg

Стилі APA, Harvard, Vancouver, ISO та ін.

Eckhard, Susanna, Sören Höhn, and Manfred Fries. "Correlations Between Suspension Formulation, Drying Parameters, Granule Structure, and Mechanical Properties of Spray Dried Ceramic Granules." In Process-Spray. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32370-1_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hens, Pieter, Monique Snoeck, and Manu De Backer. "Measuring the Impact of Suspension on the Process Enactment Environment during Process Evolution." In Lecture Notes in Business Information Processing. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36611-6_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Godart, Bruno, and Jean-Paul Persy. "Sully-sur-Loire Suspension Bridge." In Case Studies on Failure Investigations in Structural and Geotechnical Engineering. International Association for Bridge and Structural Engineering (IABSE), 2023. http://dx.doi.org/10.2749/cs004.ch11.

Повний текст джерела

Анотація:

This chapter presents the forensic investigations conducted after the collapse of the Sully-sur-Loire suspension bridge that occurred in 1985 in France. The failure mechanism concluded by the experts is the rupture of a cable-threaded tie in conjunction with a rupture of an element of the rigidity beam. The threaded ties had geometric defects, which were at the origin of the ruptures in service. These defects were either the threads themselves, or cracks due to fatigue, or corrosion phenomena. A decision-making process based on the determination of steel resilience was then launched to manage

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Process of Suspension"

Rhim, Jungsoo, and Zoltan Nagy. "Technoeconomic and Sustainability Analysis of Batch and Continuous Crystallization for Pharmaceutical Manufacturing." In Foundations of Computer-Aided Process Design. PSE Press, 2024. http://dx.doi.org/10.69997/sct.107722.

Повний текст джерела

Анотація:

Continuous manufacturing in pharmaceutical industries has shown great promise to achieve process intensification. To better understand and justify such changes to the current status quo, a technoeconomic analysis of a continuous production must be conducted to serve as a predictive decision-making tool for manufacturers. This paper uses PharmaPy, a custom-made Python-based library developed for pharmaceutical flowsheet analysis, to simulate an annual production cycle for a given active pharmaceutical ingredient (API) of varying production volumes for a batch crystallization system and a contin

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Hao, Xu Dai, and Liang Wang. "Simulation Analysis of the Microscopic Process of GIS Internal Suspension Discharge under AC Voltage Excitation." In 2024 5th International Conference on Clean Energy and Electric Power Engineering (ICCEPE). IEEE, 2024. https://doi.org/10.1109/iccepe62686.2024.10931605.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Alikhanifaradonbeh, Razieh, Reza Jafari, Jarkko Lehti, Anssi Metsähonkala,, and Heli Koivuluoto. "Nonfluorinated Superhydrophobic TiO2-Based Coatings by Suspension Flame Spraying." In ITSC 2025. ASM International, 2025. https://doi.org/10.31399/asm.cp.itsc2025p0165.

Повний текст джерела

Анотація:

Abstract This study focuses on the development of three TiO2-based coatings using suspension flame spray process. Superhydrophobic properties were achieved by creating surface roughness and reducing energy with stearic acid. The effects of polydimethylsiloxane and epoxy on these properties and durability were tested under UV light and low temperatures.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zuscikova, Monika, Milan Loksik, Vladimir Villaverde Huertas, and Cyril Belavy. "Adaptive control design for vehicle suspension." In 2013 International Conference on Process Control (PC). IEEE, 2013. http://dx.doi.org/10.1109/pc.2013.6581415.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dalir, E., J. Mostaghimi, and A. Dolatabadi. "Modeling of Suspension Plasma Spraying Process." In ITSC2019, edited by F. Azarmi, K. Balani, H. Koivuluoto, et al. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.itsc2019p0727.

Повний текст джерела

Анотація:

Abstract In this work, numerical models are developed and used to simulate magneto-hydrodynamic fields inside a dc plasma torch during suspension plasma spraying and their influence on arc attachment. A Reynolds stress model is used to simulate turbulent plasma flow and a discrete phase model simulates the effects of arc fluctuation on suspension droplets in the plasma jet. Submicron yttria-stabilized zirconia particles, suspended in ethanol, are modeled as multicomponent droplets and the KHRT model is used to simulate their breakup. The results show that particles are significantly affected b

Стилі APA, Harvard, Vancouver, ISO та ін.

Fernandez, Adersh, Muhammed Muhsin, and Mamata Sahoo. "Harmonically confined particle in a viscoelastic suspension." In 3RD PROCESS SYSTEMS ENGINEERING & SAFETY (PROSES) SYMPOSIUM 2023. AIP Publishing, 2025. https://doi.org/10.1063/5.0248359.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Killinger, A., P. Müller, and R. Gadow. "High Velocity Suspension Flame Spraying and Suspension Plasma Spraying of Oxide Ceramics." In ITSC 2012, edited by R. S. Lima, A. Agarwal, M. M. Hyland, et al. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.itsc2012p0442.

Повний текст джерела

Анотація:

Abstract Thermal spraying of oxide ceramic suspensions containing fine and ultrafine powder particles is a new approach for manufacturing ceramic coatings exhibiting a refined microstructure. Suspension sprayed coatings clearly differ from conventionally sprayed coatings regarding microstructure phase composition and resulting mechanical properties. Several industrial applications may take advantage in future; among these are thermal barrier structures, thermal shock protection, solid electrolytes, catalytically active surfaces and wear resistant coatings. Two methods, namely Suspension Plasma

Стилі APA, Harvard, Vancouver, ISO та ін.

Vaßen, R., H. Kaßner, G. Mauer, and D. Stöver. "Suspension Plasma Spraying: Process Development and Applications." In ITSC2009, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2009. http://dx.doi.org/10.31399/asm.cp.itsc2009p0162.

Повний текст джерела

Анотація:

Abstract Suspension plasma spraying (SPS) offers the manufacture of unique microstructures which are not possible with conventional powder feedstocks. Due to the considerably smaller size of the droplets and also the further fragmentation of these in the plasma jet, the attainable microstructural features like splat and pore sizes can be downsized to the nanometer range. Our present understanding of the SPS deposition process including injection, suspension plasma plume interaction, and deposition is outlined in this report. The conclusions drawn are based on microstructure analysis in combina

Стилі APA, Harvard, Vancouver, ISO та ін.

Zahn, André N., Matheus Graebin, Rodrigo Malacarne, and Juliano C. Toniolo. "Leaf Springs in Focus: Integrated Validation of Material, Process, and Performance in Mechanical Suspensions." In 13th SAE BRASIL Colloquium on Suspensions and Road Implements & Engineering Exhibition. SAE International, 2025. https://doi.org/10.4271/2025-36-0312.

Повний текст джерела

Анотація:

<div class="section abstract"><div class="htmlview paragraph">The continuous improvement of validation methodologies for mobility industry components is essential to ensure vehicle quality, safety, and performance. In the context of mechanical suspensions, leaf springs play a crucial role in vehicle dynamics, comfort, and durability. Material validation is based on steel production data, complemented by laboratory analyses such as tensile testing, hardness measurements, metallography, and residual stress analysis, ensuring that mechanical properties meet fatigue resistance requirem

Стилі APA, Harvard, Vancouver, ISO та ін.

Killinger, A., P. Müller, and R. Gadow. "High Velocity Suspension Flame Spraying of Nano Oxide Containing Suspensions." In ITSC2011, edited by B. R. Marple, A. Agarwal, M. M. Hyland, et al. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p0044.

Повний текст джерела

Анотація:

Abstract In HVSFS (High Velocity Suspension Spraying), a suspension is axially fed into the combustion chamber of a modified HVOF torch. The particle formation is strongly influenced by the phenomena occurring during the short dwell time in the combustion chamber and expansion nozzle, i.e. break up and evaporation of the liquid jet, particle formation, sintering and melting. Optimization of the spray torch has already led to an improved coating process but is still an important topic for the future. A deeper understanding of the suspension liquid / flame interaction is still necessary to contr

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Process of Suspension"

B. K. Parekh and D. P. Patil. Development of an Advanced Fine Coal Suspension Dewatering Process. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/970043.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hassan, N. M. Experimental evaluation of solids suspension uniformity in canyon process vessels. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/385567.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hassan, N. M. Mixing quality characterization in separation process tanks. Part 2: Solids-suspension. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/383594.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sagaiyaraj, Bernard. Increasing Energy Efficiency of Central Cooling Systems with Engineered Nanofluids. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau538344493.

Повний текст джерела

Анотація:

Buildings consume about 40% of the world’s energy consumption and of that, 65% is dedicated to cooling (or heating) systems. Central building cooling uses water as the main heat transfer medium. The nanoparticle fluid suspension exhibits thermal properties superior to water. The goal was to achieve the highest possible thermal properties with just the right amount of nanoparticles in a uniform and stable dispersion and suspension in water. This engineered nanofluid contains a uniform and stable suspension of graphene nanoparticles (GNP) in water. Using covalent functionalization, centrifugatio

Стилі APA, Harvard, Vancouver, ISO та ін.

Do, Thao, and Eric Kasper. The Impact of Covid-19 Response Policies on Select Vulnerable Groups in Vietnam. Institute of Development Studies, 2022. http://dx.doi.org/10.19088/ids.2022.038.

Повний текст джерела

Анотація:

Despite the significant impact of the pandemic’s fourth wave, Vietnam’s overall strategy was seen as well planned with one of the lowest infection rates globally in 2020–2021. In June 2019, an estimated 540,000 Vietnamese migrant workers were recorded working legally in 40 countries and territories, making Vietnam a major labour exporter and one of the top ten countries to receive international remittances. Our research shows how Vietnam’s Covid-19 policy response has influenced Vietnamese migrant workers and counter-trafficking work, particularly in border areas. The research discussed four m

Стилі APA, Harvard, Vancouver, ISO та ін.

Prusky, Dov, Noel T. Keen, and Stanley Freeman. Elicitation of Preformed Antifungal Compounds by Non-Pathogenic Fungus Mutants and their Use for the Prevention of Postharvest Decay in Avocado Fruits. United States Department of Agriculture, 1996. http://dx.doi.org/10.32747/1996.7570573.bard.

Повний текст джерела

Анотація:

C. gloeosporioides attacks unripe avocado fruits in the orchard. Germinated spores produce appressoria that germinate and breach the cuticle, but the resultant subcuticular hyphae become quiescent and do not develop further until fruit is harvested and ripens. Resistance of unripe avocado to attach by C. gloeosporioides is correlated with the presence of fungitoxic concentrations of the preformed antifungal compound, 1-acetoxy-2-hydroxy-4-oxoheneicosa-12, 15 diene in the pericarp of unripe fruits. The objective of this proposal was to study the signal transduction process by which elicitors in

Стилі APA, Harvard, Vancouver, ISO та ін.

Rave, Claudia, Osvaldo Landaverde, and Isabel Granada. Corredores de transporte para la integración regional y el desarrollo de las cadenas de valor del Cono Sur. Inter-American Development Bank, 2021. http://dx.doi.org/10.18235/0003769.

Повний текст джерела

Анотація:

La pandemia COVID-19 generó una interrupción de las cadenas de suministro en todos los eslabones del transporte, la movilidad y la logística, tanto de carga como de pasajeros y en escalas local, nacional e internacional. A diferencia de otros procesos críticos o períodos contingentes por desastres naturales, conflictos políticos, institucionales, captura de sectores ilegales, entre muchos otros para Latinoamérica, esta suspensión probó consecuencias sobre la economía y el desarrollo con efectos que se extenderán por más tiempo que el necesario para superar la crisis de salud pública. Visibiliz

Стилі APA, Harvard, Vancouver, ISO та ін.

Comunicación de las Ciencias, Centro. Teletrabajo y salud mental positiva: Un equilibrio necesario en contexto de pandemia. Universidad Autónoma de Chile, 2020. http://dx.doi.org/10.32457/2050012728/9605202039.

Повний текст джерела

Анотація:

El teletrabajo puede describirse como una forma de organizar y ejecutar una determinada función o actividad profesional fuera de las instalaciones definidas por el empleador (habiendo de por medio un contrato de trabajo o prestación de servicios), utilizando las diferentes tecnologías de las información y la comunicación (en adelante TICs). En este sentido, se ha observado que el teletrabajo tendría implicancias positivas para los objetivos de una organización, tales como mayor productividad, menor rotación de personal, promoción de la autonomía y la ética profesional de los empleados, autores

Стилі APA, Harvard, Vancouver, ISO та ін.

Avnimelech, Yoram, Richard C. Stehouwer, and Jon Chorover. Use of Composted Waste Materials for Enhanced Ca Migration and Exchange in Sodic Soils and Acidic Minespoils. United States Department of Agriculture, 2001. http://dx.doi.org/10.32747/2001.7575291.bard.

Повний текст джерела

Анотація:

Restoration of degraded lands and the development of beneficial uses for waste products are important challenges facing our society. In addition there is a need to find useful and environmentally friendly applications for the organic fractions of municipal and other solid waste. Recent studies have shown that composted wastes combined with gypsum or gypsum-containing flue gas desulfurization by-products enhance restoration of sodic soils and acidic minespoils. The mechanism by which this synergistic effect occurs in systems at opposite pH extremes appears to involve enhanced Ca migration and e

Стилі APA, Harvard, Vancouver, ISO та ін.

10-MW demonstration of the gas suspension absorption process at TVA`s Center for Emissions Research. Final report. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/108141.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!