Увійти

Готові списки джерел за темами / Production optimalization

Добірка наукової літератури з теми "Production optimalization"

Автор: Grafiati

Опубліковано: 13 вересня 2021

Оновлено: 1 лютого 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Production optimalization".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Зміст

Статті в журналах
Дисертації
Тези доповідей конференцій

Статті в журналах з теми "Production optimalization":

1

Ibrahimi, Izet, Nurten Deva, and Sabri Mehmeti. "Optimalization of the Ferronickel Production Process through Improving Desulfurization Effectiveness." Civil Engineering Journal 6, no. 5 (May 1, 2020): 907–18. http://dx.doi.org/10.28991/cej-2020-03091516.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Desulphurization of Ferronickel in the converters with oxygen is the most complex part of the technological process in the Drenas foundry. Sulphur in the ferronickel melting is mostly in the form of FeS, with a melting temperature of 1195oC, and it has tendency to dissolve indefinitely in liquid iron. Our objective is to determine the sulphur removal coefficient, as a key indicator of the desulphurization efficiency in the converter, by measuring the activity and concentration of sulphur and other elements in liquid Fe and melting. Determination of this coefficient is done according to the analytical method, while comparing the current process parameters with those of the new desulfurization methods, other indicators of the refining process are determined. The refining process and the effective conduct of the study depend on the XRD analysis database of metal and slag, and as well of the technological refining process analysis data. Research has shown that desulfurization efficiency is a function of the sulphur removal coefficient, respectively; metal composition, slag, oxygen activity, CaO/SiO2 ratio, sulphide capacity, fluidity, surface pressure, etc.). In addition to this coefficient, other indicators of refining process optimization are defined.

2

Soudek, P., R. Podlipna, P. Marsik, and T. Vanek. "Optimalization of the peroxidase production by tissue cultures of horseradish in vitro." Biologia plantarum 49, no. 4 (December 1, 2005): 487–92. http://dx.doi.org/10.1007/s10535-005-0037-2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

LÍVANSKÝ, K. "Theoretical analysis with respect to optimalization criteria of algae production in outdoor cultivation units." Kvasny Prumysl 41, no. 5 (May 1, 1995): 143–50. http://dx.doi.org/10.18832/kp1995010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Savinykh, Petr A., Alexey Yu Isupov, Andrey Palichyn, Ilaya I. Ivanov, Wacław Romaniuk, and Kinga Borek. "Research Resoults of Grain Shredder by Using Multiplied Method of Evaluation." Agricultural Engineering 23, no. 1 (March 1, 2019): 81–94. http://dx.doi.org/10.1515/agriceng-2019-0008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

AbstractCurrently in Russia and other countries in family farms there is a demand for lowering cost of animal production. Main direction to achieve new terchnological solutions characterized by low energy constumption and high efficiency with maintaining high quality of product (mineral). For example, lately in animal production are acquired concentrates with low unity costs. Realising targets releated with lowering costs of forage production with usage comminution and crease of grain. Previously conducted own researches and literature analises shows, that currently used solutions are characterized by big errors made by construction of the devices, and technology effect of obtained product (grain). The paper presents the criteria for optimalization of technical indicators of shredding devices affecting the quality of the product.

5

Mooijman, K. A., A. H. Havelaar, J. A. Hoekstra, and N. G. W. N. van Strijp-Lockefeer. "Production and Control of Reference Materials for Water Microbiology." Water Science and Technology 24, no. 2 (July 1, 1991): 53–56. http://dx.doi.org/10.2166/wst.1991.0029.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Reference materials for water microbiology were prepared by spray-drying milk, artificially contaminated with a known test strain. The resulting highly contaminated milk powder was mixed with sterile milk powder to a contamination level of 2000-3000 cfu/g. Gelatin capsules were filled with the mixture (0.2 g/capsule) to produce the reference materials. Test strains used were: WR1 Escherichia coli, WR3 Enterobacter cloacae, WR63 Enterococcus faecium and WR51 Staphylococcus spec. Optimalization of the mixing procedure and aging of the highly contaminated milk powder resulted in relatively homogeneous and stable reference materials. Short-time challenge tests at “high” temperatures (30 and 37 °C) may be predictive for long-term stability at “low” temperatures (4-6 °C). Reference materials with strain WR3 were stable for one week at 30 °C and for at least 6 months at 4-6 °C. Possible applications of the reference materials are: quality control of routine measurements, comparison of the efficiency of different culturing methods and as a standardized sample in collaborative studies.

6

Mézes, Lili, Tibor Bíró, János Tamás, and Mihály Petis. "The examination of poultry feather digestility for biogas production." Acta Agraria Debreceniensis, no. 26 (July 16, 2007): 113–18. http://dx.doi.org/10.34101/actaagrar/26/3064.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The aim of this research was the elaboration of the technological parameters of biological digestion and biogas production from poultry feather produced in large quantities by slaughterhouses. Feather protein was digested by Bacillus licheniformis, keratin desintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature, feather size and bacillus:feather ratio were determined in the experiments as well as the analysis of relationship between the examined parameters. In order to be able to track the dinamics of the biodegradation, we determined the extintion level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolisis was significantly higher in the treatments with bacteria than in the treatments without it. The most extensive digestion were observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion were detected in the treatment with 1% microbe ratio.

7

Mézes, Lili, Tibor Bíró, János Tamás, and Mihály Petis. "Heat treatment and microbial digestion of poulty feather for biogas production." Acta Agraria Debreceniensis, no. 27 (November 15, 2007): 215–19. http://dx.doi.org/10.34101/actaagrar/27/3128.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The aim of this research was the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feathers for biogas production. Feathers were treated at 70, 100, 140 °C, and subsequently digested by Bacillus licheniformis, or keratin disintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature,feather size and bacillus:feather ratio were determined in the experiments, as well as the analysis of relationship between the examined parameters. In order to be able to track the dynamics of the biodegradation, we determined the extinction level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolysis was significantly higher in the treatments with bacteria than in the treatments without it. Regarding the pretreatments at 70, 100 and 140 °C, the digestion of feather was the most intensive at 70 °C. The most extensive digestion was observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion wasdetected in the treatment with 1% microbe ratio.

8

Rokhim, Deni Ainur. "Sidoarjo Mudflow Electric (SMF-E): Optimalization of Sidoarjo Mudflow as an Electric Supplier Based on Electrochemical." R.E.M. (Rekayasa Energi Manufaktur) Jurnal 5, no. 1 (January 12, 2021): 23–26. http://dx.doi.org/10.21070/r.e.m.v5i1.892.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Sidoarjo mudflow or known as Lusi (Lumpur Sidoarjo) is an ecological disaster that has caused the community fret. Most of them haven’t known that the mud contains elements that can produce electricity. This research aims to find the basic value that can be obtained from ecological disaster. The research design uses electrochemical method development with magnesium and copper electrodes. The result of the electric power that can be generated is 7,07135 watt/hour. It can reach an area of 4.405986 km2 or as wide as one residential in an electric production plant. The use of Lusi is very effective because it contains high metal and high salt content. The abundant amount of Lusi can be utilized effectively throughout this way

9

Djafri, Muh Saiful, Harianto Harianto, and Yusman Syaukat. "OPTIMASI PRODUKSI USAHATANI SAYURAN ORGANIK (Studi Kasus Yayasan Bina Sarana Bakti, Cisarua, Bogor)." Forum Agribisnis 6, no. 1 (July 18, 2017): 111–29. http://dx.doi.org/10.29244/fagb.6.1.111-129.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The organic farming potential is relatively large because of the high economic benefits for farmers and it is beneficial to operate. The research carried out as an idea or information to change the paradigm of organic farmers through an approach towards research on the income aspects of organic farming by production analysis. Yayasan Bina Sarana Bakti (YBSB) is the selected organic companies in the study. The objectives of this study are (1) analyze the level of organic vegetable production optimization Yayasan Bina Sarana Bakti and the level of use of resources (2) identify changes in profit in optimal conditions Yayasan Bina Sarana Bakti (3) analyze the effect of changes in prices of production inputs and outputs to the optimal production conditions. Production optimalization analysis of organic farming in view ofincome changes is aright thing to do. Linear programming analysis was used in this research. The resultsshowed that Yayasan Bina Sarana Bakti as an agribusiness company in organic vegetable production has yet to produce optimally. Optimal conditions of the company turned out to show the change in resources optimal use of resources which have not occurred on the land surplus amounted to 10.06 percent and profits at optimal conditions which is higher than the actual which profits can be increased 57,86 percent.

10

Ramadani, Putra. "PENDIDIKAN DAN PELATIHAN DALAM MENINGKATKAN KEMITRAAN USAHA MIKRO DAN MAKRO." JMAEL: Journal of Management, Administration and Educational Leadership 1, no. 3 (September 16, 2020): 47–51. http://dx.doi.org/10.51376/jmael.v1i3.171.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Digital this article direct to describe of training and education for overcome corporate small-Midle enterprises and big enterprises models. The necesary of training and education will increasing of common purpose, aim, and value of company achievment. During the last research to find structure of problems by typology and characteristic of organization culture and production factors in single model co-operate small-Midle enterprises and big enterprises, the result has find another leverage factor overview training and education. To a comprehensive result by approach input, process, and output and finded by description approach through case study strategic describe to this article. The result of cooperate by sub-contract way based on common mutual, common strange, common benefit as direct as Act Number 20/2008 (small-midle enterprises) we need training and education to input this model. Recommendation in this article not only use to optimalization supply row materials, finish production, market strategic, and minimazing over head cost by co-operate small-Midle enterprises and big enterprises benefits but training and education will over come corporate small-Midle enterprises and big enterprises models at Cikoneng District.

Більше джерел

Дисертації з теми "Production optimalization":

1

Dvořák, Pavel. "Plánování výroby s podporou informačního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229980.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This thesis deals with adding planning to the current information system as requirement by the company. The theoretical part describes the methodes of information systems for the production plan. These tools are mostly general and trying to cover the entire spectrum of manufacturing processes. The practical part is devoted to implementing of the produciton planning. The modul planning is incorporated into the current information system.The modul planning has been implementing for efficiency of the systemand faster throughput of the orders the company.

2

Teknős, Oliver. "Návrh změn výrobního procesu se zaměřením na rozšíření layoutu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-224869.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Master´s thesis deals with the issue of improving production processes in engineering company, which is expanding it´s existing facilities with the new hall. The company is engaged in manufacturing gears and gearboxes. The thesis deals with the design of new layout in new and former facilities in order to optimize material flow, costs and minimize production time.

3

Klimešová, Lenka. "Optimalizace výrobních toků a procesů ve vybraném úseku společnosti ATONA s. r. o." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2016. http://www.nusl.cz/ntk/nusl-234701.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This master's thesis deals with optimalization of production flows and processes in se-lected part of the company ATONA s. r. o. Realized suggestions for improvement are based on finding the current state by the corresponding methods. New state is analysed with same methods and compared with original state, also benefits of the realized opti-mization are determined.

4

Langer, David. "Identifikace a hodnocení chyb na výrobní lince a jejich prevence." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229771.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The manufacturing companies are faced to the strong pressure to decrease the production costs. They are therefore forced to optimize the manufacturing processes and to increase their efficiency. The ideal way to increase the productivity is to optimize the manufacture by increasing the efficacy of the equipment, material, working hours and other sources of finding out causes of wasting in production, it means to abolish the causes of making mistakes.

5

Vymazal, Aleš. "Výroba a vady masivních odlitků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229432.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Objective of diploma thesis is to proceed analysis of actual technology in operational terms for concrete casting of bearing . Constructed by foundry of steel ŽĎAS a.s., Žďár nad Sázavou. After designing changes in technological process accomplish detail evaluation of mechanical properties and chemical homogenity of metal at selected parts of sample casting.

6

Pravec, Libor. "Studie projektu výrobního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2010. http://www.nusl.cz/ntk/nusl-409532.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This Master‘s thesis describes throughput of manufacturing order in company Walter s.r.o. It is a proposal of improvement system to monitoring order in mounting. Better told, it is unification of dates to central place and accessing to all concern. This company belongs to the group WALTER MASCHINENBAU GmbH. The bussines comunity deals with developments, production and selling of CNC (by computer numeric controlled) machines for production, fine grinding and measuring tools.

7

Stříž, Radim. "Optimalizace produkce bakteriální celulózy." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-449757.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This diploma thesis focuses on the optimization of bacterial cellulose production by Komagateibacter xylinus DSM 46604. The theoretical part of this thesis describes the properties of bacterial cellulose, its production and application possibilities. The experimental part aimed to assess the effect of different cultivation conditions on the production yields of bacterial cellulose. The effects of several cultivation strategies have been studied such as: (1) effect of acetate buffer used as a medium, (2) impact of oil added into the medium, (3) fed-batch cultivation, (4) variation of the volume of cultivation vessel and cultivation media and (5) aeration. In addition to the production of relatively thin samples, up to 100 µm was synthesized unique 3D structured bacterial cellulose in the form of cylinders, with a height up to 2 cm. The growth of bacterial cellulose in the form of cylinders was achieved by dynamically cultivating K. xylinus in combination with fed-batch approach.

8

Matoušek, David. "Optimalizace a návrh tiskového centra za využití metod štíhlé výroby ve společnosti IMI International, s.r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400928.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This Master's thesis deals with the design of a new workplace and the optimization of the process of printing production documentation for given production sections at IMI International Ltd. The solution to the problem begins with an analysis of the process that pointed to certain types of waste. Then, the process was optimized and a more efficient workplace with ergonomic features was designed. In the last part of the thesis the proposal is technically and economically evaluated.

9

Bistrá, Vendula. "Návrh štíhlé výroby ve vybraném provozu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-225298.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The thesis is focused on the implementation of a lean component in the manufacturing process of First Brno Machinery Velká Bíteš, Ltd. With the help of lean componant Value Stream Mapping (VSM – value stream mapping) an analysis of the current status is determined that underlies the bottleneck analysis in the manufacturing process. Based on that analysis the optimal future state of the manufacturing process is designed which leads to a production efficiency. This thesis focuses on increasing customer value and reducing waste in manufacturing.

10

Přibyl, Lukáš. "Optimalizace výrobního procesu ve firmě Zambelli-technik s.r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-264885.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This master’s thesis presents production process optimization in Zambelli – technik s.r.o. company acting on metal production and work metal in České Budějovice. The aim of optimization is to secure continuous input flow of material into production. It compares current material costs with material costs after the optimization, that consists in sheetmetal coil handling and cutting machine purchase.

Більше джерел

Тези доповідей конференцій з теми "Production optimalization":

1

Sasongko, Budi, Elfindri Elfindri, Sjafrizal, Tafdil Husni, and Alpon Satrianto. "Production Optimalization Analysis and Maximization Profit of Salt Farmers on the Madura Island." In Proceedings of the 5th Annual International Conference on Accounting Research (AICAR 2018). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/aicar-18.2019.28.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.