Готові списки джерел за темами / Quality of machine parts / Дисертації
Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Quality of machine parts.

Дисертації з теми "Quality of machine parts"

Автор: Grafiati
Опубліковано: 28 травня 2022
Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 дисертацій для дослідження на тему "Quality of machine parts".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Hsieh, Kuang-Han. "Part geometry for advanced quality control and process monitoring /." free to MU campus, to others for purchase, 1997. http://wwwlib.umi.com/cr/mo/fullcit?p9842539.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zenkin, M. "Monitoring the quality of the surface layer of details replaced by different methods of hardening." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/9741.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ji, Qiang. "A three dimensional computer vision system for inspecting the geometric tolerances of circular machine features /." Thesis, Connect to this title online; UW restricted, 1998. http://hdl.handle.net/1773/5953.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Fiala, John C. "Computer representations of machined parts for automatic inspection." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/76033.

Повний текст джерела
Анотація:
A comparison is made between octrees, which are regular decompositions of volumes, and new, irregular decompositions called R-trees. This comparison is made within the context of the volume intersection problems that might be associated with an automatic inspection system. The results show that the irregular decomposition is independent of object position and can provide a more space efficient encoding for certain shapes. However, detecting intersections between R-trees requires an algorithm of greater complexity due to the irregularity of the decomposition. Algorithms are given for obtainin
Стилі APA, Harvard, Vancouver, ISO та ін.
5

MELO, JOSE A. T. "Projeto e montagem de equipamento para controle de sistema de análise não destrutiva usando radiação nuclear." reponame:Repositório Institucional do IPEN, 2006. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11471.

Повний текст джерела
Анотація:
Made available in DSpace on 2014-10-09T12:52:16Z (GMT). No. of bitstreams: 0<br>Made available in DSpace on 2014-10-09T14:00:37Z (GMT). No. of bitstreams: 0<br>Dissertacao (Mestrado)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Стилі APA, Harvard, Vancouver, ISO та ін.
6

FITTI, Matteo. "Non-contact smart measurement systems for in-line quality control of precision turned parts." Doctoral thesis, Università Politecnica delle Marche, 2020. http://hdl.handle.net/11566/274500.

Повний текст джерела
Анотація:
Questa tesi è il risultato del lavoro svolto nell'ambito del progetto europeo H2020 GO0D MAN e intende essere un contributo alla realizzazione del paradigma dell' Industry 4.0. In particolare, riguarda lo sviluppo di sistemi intelligenti di controllo qualità in linea. Il lavoro presenta lo sviluppo di due sistemi: a) un sistema di misura automatizzato basato su un sensore cromatico confocale per controllare le dimensioni dei componenti metallici torniti e b) un sistema di controllo automatizzato basato su visione artificiale per verificare la presenza di bave dovute al processo di foratura su
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Norrell, Jeffery Lee. "A mixed mode thermal/fluids model for improvements in SLS part quality, machine design, and process design /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ahmadniaye, Bosari Benyamin. "Reliable training scenarios for dealing with minimal parallel-resource language pairs in statistical machine translation." Doctoral thesis, Universitat Autònoma de Barcelona, 2017. http://hdl.handle.net/10803/461204.

Повний текст джерела
Анотація:
La tesis trata sobre sistemas de traducción automática estadística (SMT) de alta calidad, para trabajar con pares de lenguajes con recursos paralelos mínimos, titulado “Reliable Training Scenarios for Dealing with Minimal Parallel-Resource Language Pairs in Statistical Machine Translation”. El desafío principal que abordamos en nuestro enfoque es la carencia de datos paralelos y este se enfrenta en diferentes escenarios. SMT es uno de los enfoques preferidos para traducción automática (MT), y se podrían detectar varias mejoras en este enfoque, específicamente en la calidad de salida en una se
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Внуков, Ю. Н., та Д. Н. Степанов. "Шероховатость поверхностей титановых образцов после обработки полимерно-абразивным инструментом". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11261.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Smirnova, Tatiana. "Dynamic Analysis and Modeling of Machine Tool Parts." Licentiate thesis, Karlskrona : Department of Signal Processing, School of Engineering, Blekinge Institute of Technology, 2008. http://www.bth.se/fou/Forskinfo.nsf/allfirst2/8628d01b6722765cc12573e70044bfd2?OpenDocument.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Foitzik, John. "Comparison between two methods for 3D imaging of machine parts." Thesis, KTH, Data- och elektroteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172941.

Повний текст джерела
Анотація:
Today the production time is shortened when components are made with additive manufac- turing and the finished products typically have very few defects. If the components quality is to be validated, it’s done with a Non-destructive testing method. In this thesis a test piece made of Inconel 939, that is used in high temperature application was examined with a non- destructive testing technique (NDT), computed tomography (CT) and with destructive test- ing (DT) by grinding the test piece down to a given position and taking images of the ex- posed surface. The purpose was to validate computed to
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Berndt, Stephanie. "Manufacturing Analysis and Process Optimization of Welded Parts." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1378195880.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Schoech, Alexander. "Quality control of freeform parts at elevated temperature." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424502.

Повний текст джерела
Анотація:
Modern industries operate under high cost pressure coupled with ever increasing demands on their processes and products. Production processes are e.g. increasingly complex while the permitted tolerances, batch sizes and time-to-market times decrease. These partly contradictory trends require sophisticated production processes with advanced strategies for quality assurance and process control. The aim of this work is to analyse such a complex, multi-stage production process, the production of turbine blades, in terms of quality, process adjustment for small batch sizes and cost. In the conside
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Bauman, Randall (Randall David) 1971. "Designing a service parts quality system for rapid customer response." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84325.

Повний текст джерела
Анотація:
Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science; in conjunction with the Leaders for Manufacturing Program at MIT, 2002.<br>"June 2002."<br>Includes bibliographical references (leaves 57-60).<br>by Randall Bauman.<br>S.M.<br>M.B.A.
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Eguasa, Uyi Harrison. "Strategies to Improve Data Quality for Forecasting Repairable Spare Parts." ScholarWorks, 2016. https://scholarworks.waldenu.edu/dissertations/3155.

Повний текст джерела
Анотація:
Poor input data quality used in repairable spare parts forecasting by aerospace small and midsize enterprises (SME) suppliers results in poor inventory practices that manifest into higher costs and critical supply shortage risks. Guided by the data quality management (DQM) theory as the conceptual framework, the purpose of this exploratory multiple case study was to identify the key strategies that the aerospace SME repairable spares suppliers use to maximize their input data quality used in forecasting repairable spare parts. The multiple case study comprised of a census sample of 6 forecasti
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Scarton, Carolina. "Document-level machine translation quality estimation." Thesis, University of Sheffield, 2016. http://etheses.whiterose.ac.uk/16763/.

Повний текст джерела
Анотація:
Assessing Machine Translation (MT) quality at document level is a challenge as metrics need to account for many linguistic phenomena on different levels. Large units of text encompass different linguistic phenomena and, as a consequence, a machine translated document can have different problems. It is hard for humans to evaluate documents regarding document-wide phenomena (e.g. coherence) as they get easily distracted by problems at other levels (e.g. grammar). Although standard automatic evaluation metrics (e.g. BLEU) are often used for this purpose, they focus on n-grams matches and often di
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Nitesh, Varma Rudraraju Nitesh, and Boyanapally Varun Varun. "Data Quality Model for Machine Learning." Thesis, Blekinge Tekniska Högskola, Institutionen för programvaruteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-18498.

Повний текст джерела
Анотація:
Context: - Machine learning is a part of artificial intelligence, this area is now continuously growing day by day. Most internet related services such as Social media service, Email Spam, E-commerce sites, Search engines are now using machine learning. The Quality of machine learning output relies on the input data, so the input data is crucial for machine learning and good quality of input data can give a better outcome to the machine learning system. In order to achieve quality data, a data scientist can use a data quality model on data of machine learning. Data quality model can help data
Стилі APA, Harvard, Vancouver, ISO та ін.
18

Barker, David W. "Machine Tool Spare Parts Provisioning for Manufacturers: A Study and Application for Industries Engaged in Aluminum Cutting and Shaping." Thesis, North Texas State University, 1985. https://digital.library.unt.edu/ark:/67531/metadc331260/.

Повний текст джерела
Анотація:
This study identifies the concepts of reliability, cost of downtime, cost of spare parts, and procurement lead time as the four key moderators of spare parts availability. These concepts are used to establish a model to manage spare parts inventories. Reliability was assessed in terms of developing failure predictions for major component categories. Cost of downtime was evaluated by identifying various methods for determining costs associated with downtime. Cost of spare parts was examined to find correlations with economic indicators. These correlations were used to predict future price movem
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Zhang, Cheng. "Defect detection and life prediction of rolling element bearings." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17658.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
20

Peng, Huiping. "Air quality prediction by machine learning methods." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/55069.

Повний текст джерела
Анотація:
As air pollution is a complex mixture of toxic components with considerable impact on humans, forecasting air pollution concentration emerges as a priority for improving life quality. In this study, air quality data (observational and numerical) were used to produce hourly spot concentration forecasts of ozone (O₃), particulate matter 2.5μm (PM₂.₅) and nitrogen dioxide (NO₂), up to 48 hours for six stations across Canada -- Vancouver, Edmonton, Winnipeg, Toronto, Montreal and Halifax. Using numerical data from an air quality model (GEM-MACH15) as predictors, forecast models for pollutant conce
Стилі APA, Harvard, Vancouver, ISO та ін.
21

Cahill, Jaspar. "Machine learning techniques to improve software quality." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/41730/1/Jaspar_Cahill_Thesis.pdf.

Повний текст джерела
Анотація:
A significant proportion of the cost of software development is due to software testing and maintenance. This is in part the result of the inevitable imperfections due to human error, lack of quality during the design and coding of software, and the increasing need to reduce faults to improve customer satisfaction in a competitive marketplace. Given the cost and importance of removing errors improvements in fault detection and removal can be of significant benefit. The earlier in the development process faults can be found, the less it costs to correct them and the less likely other faults are
Стилі APA, Harvard, Vancouver, ISO та ін.
22

Arendsee, Wayne C. "Development of a Coaxiality Indicator." Thesis, University of North Texas, 1999. https://digital.library.unt.edu/ark:/67531/metadc2283/.

Повний текст джерела
Анотація:
The geometric dimensioning and tolerancing concept of coaxiality is often required by design engineers for balance of rotating parts and precision mating parts. In current practice, it is difficult for manufacturers to measure coaxiality quickly and inexpensively. This study examines feasibility of a manually-operated, mechanical device combined with formulae to indicate coaxiality of a test specimen. The author designs, fabricates, and tests the system for measuring coaxiality of holes machined in a steel test piece. Gage Repeatability and Reproducibility (gage R&R) and univariate analysis
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Fidan, Tahir. "Feature Based Design Of Rotational Parts Based On Step." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605632/index.pdf.

Повний текст джерела
Анотація:
The implicit and low-level part definition data, provided by geometric modeling cannot be used by downstream applications. Therefore, feature based modeling concept has been introduced to integrate CAD and downstream applications. However, due to the lack of implicit and explicit standard representations for features and unmanageable number of possible predefined features without standardization, feature based modeling approach has proved to be inadequate. STEP AP224 provides a standard for both implicit and explicit representations for manufacturing features. This thesis presents STEP AP224 f
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Lu, Shirley Suet-Ning. "Improving surface quality of SLA 3D printed parts via controlled dip-coating." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119948.

Повний текст джерела
Анотація:
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 35).<br>3D printing is useful for rapid prototyping, and is quickly becoming an option to aid in mass manufacturing, whether to make low-volume molds for injection molding and thermoforming or to make unique fixtures. 3D printing via stereo lithographic apparatus (SLA) builds parts by curing photopolymer resins layer by layer. SLA 3D printing is often chosen for its relatively high quality surface finish. However,
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Lestrange, Charis. "Effect of surface roughness on quality perception of Laser Sintered (LS) parts." Thesis, University of Sheffield, 2016. http://etheses.whiterose.ac.uk/17349/.

Повний текст джерела
Анотація:
Additive Manufacturing (AM) is a revolutionary technology that in recent years has become increasingly visible in mainstream media and is in the process of being developed for more widespread industrial applications. One of the challenges that has hindered the growth of AM in industry has been the aspect of surface finish, particularly in the use of Laser Sintering (LS). The surfaces produced are often perceived to be of a lower quality than those of other more traditional techniques. One of the ways in which developments have been made to address this issue is to use different post-processing
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Smirnova, Tatiana. "Analysis, Modeling and Simulation of Machine Tool Parts Dynamics for Active Control of Tool Vibration." Doctoral thesis, Karlskrona : Blekinge Institute of Technology, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-00472.

Повний текст джерела
Анотація:
Boring bar vibration in machine tools during internal turning operations is a pronounced problem in the manufacturing industry. Due to the often slender geometry of the boring bar, vibration may easily be induced by the material deformation process. One approach to overcome such vibration problems is to use active control of boring bar vibration. The design time of an active boring bar depends to a great extent on the knowledge of its dynamic properties when clamped in a lathe for different actuator positions and sizes, crucial for its performance. This thesis focuses on the development of acc
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Werkmeister, Jaime Brooke 1977. "Design and fabrication of the MesoMill : a five-axis milling machine for meso-scaled parts." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/27142.

Повний текст джерела
Анотація:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.<br>Includes bibliographical references (p. 113-115).<br>With the increased prevalence of meso-scaled products, new tools are being developed to bridge the gap between fabrication processes tailored for micrometer and millimeter sized features. Compared to its traditional counterpart, a small machine tool designed for meso-scale could potentially have a smaller overall footprint, shorter structural loop and lower cost than a conventional machine; in addition, a small machine presents opportunities for i
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Abrahamsson, Petter. "User Interface Design for Quality Control : Development of a user interface for quality control of industrial manufactured parts." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79724.

Повний текст джерела
Анотація:
The expected quality on manufactured components in the automotive industry is high, often with an accuracy of tenths of a millimeter. The conventional methods used to ensure the manufactured components are very accurate, but they are both time consuming and insufficient and only a small part of the produced series are analyzed today. The measurement is performed manually in so-called measurement fixtures. Where each component is fixed and predetermined points of investigation are controlled with a dial indicator. These fixtures are very expensive to manufacture and they are only compatible wit
Стилі APA, Harvard, Vancouver, ISO та ін.
29

Al, Kloub Naser Yousef Abdalla. "Increasing the wearproofness of machine details of light industry by technological methods." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/9679.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Nordberg, Gustav, та Jesper Grandien. "The crucial parts of text classification with TensorFlow.js and categorisation of news articles". Thesis, Blekinge Tekniska Högskola, Institutionen för programvaruteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-19813.

Повний текст джерела
Анотація:
Text classification is a subset of machine learning which is used to classify texts such as tweets, email, news headlines or articles, with tags or categories. As news publishing can have uncertainty in their categorisations, text classification could categorise articles autonomously and distinguish unclear categorisations. The library TensorFlow helps with operations and tools for the machine learning workflow.  This paper takes focus on the crucial parts of working with machine learning using TensorFlow.js and to what extent this model can categorise a news article. The authors evaluates dif
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Granstedt, Möller Erik. "The Use of Machine Learningin Industrial Quality Control." Thesis, KTH, Industriell produktion, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-216163.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
32

Uziela, Karolis. "Protein Model Quality Assessment : A Machine Learning Approach." Doctoral thesis, Stockholms universitet, Institutionen för biokemi och biofysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-137695.

Повний текст джерела
Анотація:
Many protein structure prediction programs exist and they can efficiently generate a number of protein models of a varying quality. One of the problems is that it is difficult to know which model is the best one for a given target sequence. Selecting the best model is one of the major tasks of Model Quality Assessment Programs (MQAPs). These programs are able to predict model accuracy before the native structure is determined. The accuracy estimation can be divided into two parts: global (the whole model accuracy) and local (the accuracy of each residue). ProQ2 is one of the most successful MQ
Стилі APA, Harvard, Vancouver, ISO та ін.
33

Kothawade, Rohan Dilip. "Wine quality prediction model using machine learning techniques." Thesis, Högskolan i Skövde, Institutionen för informationsteknologi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-20009.

Повний текст джерела
Анотація:
The quality of a wine is important for the consumers as well as the wine industry. The traditional (expert) way of measuring wine quality is time-consuming. Nowadays, machine learning models are important tools to replace human tasks. In this case, there are several features to predict the wine quality but the entire features will not be relevant for better prediction. So, our thesis work is focusing on what wine features are important to get the promising result. For the purposeof classification model and evaluation of the relevant features, we used three algorithms namely support vector mach
Стилі APA, Harvard, Vancouver, ISO та ін.
34

Hadodo, Hannan. "Springs in the Central Parts of Vallentuna Municipality - traditions and threats." Thesis, KTH, Skolan för kemivetenskap (CHE), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-220703.

Повний текст джерела
Анотація:
Twenty springs in the central parts of Vallentuna municipality have been studied to determine their present water qualities and suggest actions that could be taken to improve the water quality and availability of the springs. The measured parameters are the water volume, the water flow, the water temperature, the pH-value, the electrical conductivity, the chloride concentration, the alkalinity and the CODMn. The sensory properties of the springs were also examined, which include odour, colour, clarity and precipitation. Measurements of the water flows, the water temperatures, the pH-values and
Стилі APA, Harvard, Vancouver, ISO та ін.
35

Santini, Norman Gabriele Antonio. "Quality Control procedure management for critical drawing parts of a two-seater helicopter." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Знайти повний текст джерела
Анотація:
The goal of this thesis is to study the various mechanical parts of a two-seater helicopter, give an objective method to establish the criticism and the necessity of a Quality Control and/or a Dimensional Control by examining the technical drawings and using some common industrial software.
Стилі APA, Harvard, Vancouver, ISO та ін.
36

Khadir, Lahouari. "Étude du phénomène de résonance des pièces complexes en aluminium /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2007. http://theses.uqac.ca.

Повний текст джерела
Анотація:
Thèse (M.Eng.) -- Université du Québec à Chicoutimi, 2007.<br>La p. de t. porte en outre: Mémoire présenté à l'Université du Québec à Chicoutimi comme exigence partielle de la maîtrise en ingénierie. CaQQUQ Bibliogr.: f. 117-120. Document électronique également accessible en format PDF. CaQQUQ
Стилі APA, Harvard, Vancouver, ISO та ін.
37

Brocks, Michael Patrick, and Castañeda Renzo Eliseo Trujillo. "The impact of installed base and machine failure prediction on spare parts forecasting and inventory planning." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/107524.

Повний текст джерела
Анотація:
Thesis: M. Eng. in Logistics, Massachusetts Institute of Technology, Supply Chain Management Program, 2016.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 66-70).<br>Recent advances in technological capability and economics have opened up a new world of capability known as the Internet of Things (IoT). The Internet of Things is the concept that all machines can be connected to the internet, and be remotely monitored through an infrastructure of interconnected software and hardware. Many companies are just beginning to explore the economic value that the
Стилі APA, Harvard, Vancouver, ISO та ін.
38

Wong, Ching-Li Jimmy. "Computer integrated dimensional inspection of manufactured parts with sculptured surfaces using CAD and coordinate measuring machine /." The Ohio State University, 1989. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487672631601377.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
39

Aleti, Kalyan Reddy. "E-quality control a support vector machines approach /." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2008. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
40

Aytekin, Oguz. "Numerical And Experimental Investigation Of Fatigue Life In Deep Drawn Parts." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12607386/index.pdf.

Повний текст джерела
Анотація:
Sheet metal forming has an important place among metal forming processes. As the usage of sheet metal increases, the fatigue simulation and optimization of these parts become more important. This thesis study examines the change of the fatigue life of a sheet metal part after forming. A sphere-like shape is deep drawn and change in thickness and residual stresses are analyzed. To understand the effect of residual stresses, deep drawn parts with and without residual stress tested against the fatigue failure. In parallel, the forming process is simulated with an implicit finite element method (F
Стилі APA, Harvard, Vancouver, ISO та ін.
41

Herzog, Michael Andreas. "Machine and component residual life estimation through the application of neural networks." Pretoria [S.n.], 2006. http://upetd.up.ac.za/thesis/available/etd-10252007-131736/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
42

Subramonian, Soumya. "Improvement of Punch and Die Life and Part Quality in Blanking of Miniature Parts." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1365523543.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
43

Liu, Lixin. "Urban air quality management in Östersund : Finding the suitable parts for Chinese cities to learn from Östersund." Thesis, Mittuniversitetet, Avdelningen för ekoteknik och hållbart byggande, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-25432.

Повний текст джерела
Анотація:
Urban air quality management is a system for governments to lead cities towards achieving good air quality standards in an efficient way. Good air quality can avoid many environmental issues which are regarding air problems. At least, reduce environmental impacts efficiently in some extent. Carbon monoxide (CO), nitrogen dioxide (NO2), sulfur dioxide (SO2), volatile organic compounds (VOC) and particulate matter (PM) are the common elements of air pollution. Topography, weather, the physical and chemical properties of pollutants and emission sources are also accomplices of air pollution. Öster
Стилі APA, Harvard, Vancouver, ISO та ін.
44

Li, Cui. "Image quality assessment using algorithmic and machine learning techniques." Thesis, Available from the University of Aberdeen Library and Historic Collections Digital Resources. Restricted: no access until June 2, 2014, 2009. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?application=DIGITOOL-3&owner=resourcediscovery&custom_att_2=simple_viewer&pid=26521.

Повний текст джерела
Анотація:
Thesis (Ph.D.)--Aberdeen University, 2009.<br>With: An image quality metric based in corner, edge and symmetry maps / Li Cui, Alastair R. Allen. With: An image quality metric based on a colour appearance model / Li Cui and Alastair R. Allen. ACIVS / J. Blanc-Talon et al. eds. 2008 LNCS 5259, 696-707. Includes bibliographical references.
Стилі APA, Harvard, Vancouver, ISO та ін.
45

Ahmed, Nabeel. "Improving the torque quality of a modulated pole machine." Thesis, University of Newcastle upon Tyne, 2016. http://hdl.handle.net/10443/3684.

Повний текст джерела
Анотація:
The research work carried out in this thesis is collaboration between Newcastle University and Höganäs AB, Sweden. A topology, termed ‘Separate Phase MPM’ was initially developed by Newcastle University and Höganäs where the machine takes advantage of mutual flux paths in order to increase the torque density of the machine, however had high cogging torque and back EMF harmonic content. The work presented in this thesis was carried out with an overall aim to minimise the cogging torque and back EMF harmonics in the Modulated Pole Machine (MPM) topology aimed toward electric bicycles. Various te
Стилі APA, Harvard, Vancouver, ISO та ін.
46

Mahirah, Binti Jahari. "Double Lighting Machine Vision System for Rice Quality Evaluation." Kyoto University, 2017. http://hdl.handle.net/2433/228241.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
47

Umemoto, Makiko. "Machine learning-based quality control for air temperature data." Diss., Connect to online resource, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1439448.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
48

Vieira, Fábio Henrique Antunes [UNESP]. "Image processing through machine learning for wood quality classification." Universidade Estadual Paulista (UNESP), 2016. http://hdl.handle.net/11449/142813.

Повний текст джерела
Анотація:
Submitted by FÁBIO HENRIQUE ANTUNES VIEIRA null (curso_structural@hotmail.com) on 2016-08-03T12:43:17Z No. of bitstreams: 1 Fábio Henrique Antunes Vieira TESE.pdf: 4977174 bytes, checksum: f3e115728925e457e12dd4a79c93812a (MD5)<br>Approved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-08-04T19:15:49Z (GMT) No. of bitstreams: 1 vieira_fha_dr_guara.pdf: 4977174 bytes, checksum: f3e115728925e457e12dd4a79c93812a (MD5)<br>Made available in DSpace on 2016-08-04T19:15:49Z (GMT). No. of bitstreams: 1 vieira_fha_dr_guara.pdf: 4977174 bytes, checksum: f3e1157289
Стилі APA, Harvard, Vancouver, ISO та ін.
49

Vieira, Fábio Henrique Antunes. "Image processing through machine learning for wood quality classification /." Guaratinguetá, 2016. http://hdl.handle.net/11449/142813.

Повний текст джерела
Анотація:
Orientador: Manoel Cléber de Sampaio Alves<br>Banca: Fábio Minoru Yamaji<br>Banca: Ana Lúcia Piedade Sodero Martins Pincelli<br>Banca: André Luís Debiaso Rossi<br>Banca: Carlos de Oliveira Affonso<br>Abstract: The quality classification of wood is prescribed throughout the wood chain industry, particularly those from the processing and manufacturing fields. Those organizations have invested energy and time trying to increase value of basic items, with the purpose of accomplishing better results, in agreement to the market. The objective of this work was to compare Convolutional Neural Network,
Стилі APA, Harvard, Vancouver, ISO та ін.
50

Jin, Fenghua. "Machine vision technology for food quality and safety inspections." College Park, Md.: University of Maryland, 2008. http://hdl.handle.net/1903/8772.

Повний текст джерела
Анотація:
Thesis (Ph. D.) -- University of Maryland, College Park, 2008.<br>Thesis research directed by: Fischell Dept. of Bioengineering . Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити добірки на тему "Quality of machine parts" для інших типів джерел:
Статті в журналах Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії