Увійти

Готові списки джерел за темами / Radial Strength

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Radial Strength"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Radial Strength".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Radial Strength"

1

Hu, La, Lizhe Qin, Dongshan Wu, Huilan Xu, and Zhangqi Yang. "Radial variation in bonding performance of preservative-treated wood within Pinus elliottii trees and its relationships with wood density and adhesive penetration." BioResources 16, no. 2 (2021): 2204–14. http://dx.doi.org/10.15376/biores.16.2.2204-2214.

Повний текст джерела

Анотація:

Pinus elliottii wood from different radial locations within trees was used to prepare two-layer preservative-treated wood joints with alkaline copper quaternary preservative and emulsion polymer isocyanates (EPI) or resorcinol-phenol-formaldehyde (RPF) adhesives. The radial variations in shear strength and wood failure percentage were analyzed. Radial variations in wood density and average penetration depth (AP) of adhesives were investigated to establish relationships between shear strengths and characteristics of bonded joints. The shear strengths of EPI- and RPF-bonded joints showed similar

Стилі APA, Harvard, Vancouver, ISO та ін.

2

郭, 良栋. "Radial Load Screw Strength Check Method." Mechanical Engineering and Technology 08, no. 06 (2019): 526–34. http://dx.doi.org/10.12677/met.2019.86061.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Yadav, Amit, Sagar Bansal, Mrinal Kambli, Shaswat Mishra, and Devenshu Gupta. "A Comparative Study Showing Elbow Kinematics in Radial Head Replacement Versus Radial Head Excision Versus Radial Head Fixation." Trauma International 8, no. 2 (2022): 1–5. http://dx.doi.org/10.13107/ti.2022.v08i02.026.

Повний текст джерела

Анотація:

Background: Radial head fractures are quite common with incidence 1.5-4% of all adult fractures. The management of these fractures depends upon age and type of injury Aim: To compare the outcome in comminuted radial head fractures(Mason type III) based on mayo elbow scoring and handgrip strength test when managed with radial head excision, radial head fixation or radial head replacement Material and Methods: We did a prospective comparative study comprising 60 patients between age 20-60 years with Mason type III radial head fractures. The patients were randomised using the admission day of the

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Cook, Robert F., and David H. Roach. "The effect of lateral crack growth on the strength of contact flaws in brittle materials." Journal of Materials Research 1, no. 4 (1986): 589–600. http://dx.doi.org/10.1557/jmr.1986.0589.

Повний текст джерела

Анотація:

The effect of lateral cracks on strength controlling contact flaws in brittle materials is examined. Inert strength studies using controlled indentation flaws on a range of ceramic, glass, and single crystal materials reveal significant increases in strength at large contact loads, above the predicted load dependence extrapolated from strength measurements at low indentation loads. The increases are explained by the growth of lateral cracks decohesing the plastic deformation zone associated with the contact from the elastically restraining matrix, thereby reducing the residual stress field dri

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Waktole, Samson, Mahadi Mussa, Lamesa Abara, Misganaw Wale, and Kassahun Mogninet. "Investigation of Physical and Mechanical Properties and Their Relationship in Senegalia caffra Wood Grown in Northern Ethiopia." Indonesian Journal of Innovation and Applied Sciences (IJIAS) 5, no. 1 (2025): 58–69. https://doi.org/10.47540/ijias.v5i1.1767.

Повний текст джерела

Анотація:

This research focused on determining the physical and mechanical properties of Senegalia caffra collected from a Gilgile Beles site in Ethiopia and analyzing how these properties relate to the wood's performance. Fifteen (15) sample trees were selected and felled for the study. Sampling, specimen preparation, and conducting the different tests were achieved following ISO and British standards. In this study, the mean basic density of 594.40 Kg/m3, modulus of elasticity (MoE) of 9,556.79 N/mm2, modulus of rupture (MoR) of 105.69 N/mm2, compression strength parallel to the grain of 53.15 N/mm, i

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Tomczak, Arkadiusz, and Tomasz Jelonek. "Radial variation in the wood properties of Scots pine (Pinus sylvestris L.) grown on former agricultural soil." Forest Research Papers 74 (2) (March 1, 2013): 171–77. https://doi.org/10.2478/frp-2013-0017.

Повний текст джерела

Анотація:

The soil of former farmland greatly differs from forest soil, and significantly influences tree growth and development compared with other site factors. The effect may also be reflected indirectly in radial variability of wood. This study compared radial variation of wood density, compressive strength along the grain and static bending strength of wood of Scots pine trees growing on former farmland and forest soils. The analyses were conducted in eight mature pine stands. On the basis of the stand description, four stands were classified as growing on forest soil (L) and four as growing on for

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Mackinnon, Susan E., Brandon Roque, and Thomas H. Tung. "Median to radial nerve transfer for treatment of radial nerve palsy." Journal of Neurosurgery 107, no. 3 (2007): 666–71. http://dx.doi.org/10.3171/jns-07/09/0666.

Повний текст джерела

Анотація:

✓The purpose of this study is to report a surgical technique of nerve transfer to restore radial nerve function after a complete palsy due to a proximal injury to the radial nerve. The authors report the case of a patient who underwent direct nerve transfer of redundant or expendable motor branches of the median nerve in the proximal forearm to the extensor carpi radialis brevis and the posterior interosseous branches of the radial nerve. Assessment included degree of recovery of wrist and finger extension, and median nerve function including pinch and grip strength. Clinical evidence of reinn

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Su, Frances, Joyce Mok, and Joanna McKittrick. "Radial-Concentric Freeze Casting Inspired by Porcupine Fish Spines." Ceramics 2, no. 1 (2019): 161–79. http://dx.doi.org/10.3390/ceramics2010015.

Повний текст джерела

Анотація:

Freeze casting is a technique used to manufacture porous ceramics with aligned microstructures. In conventional freeze casting, these microstructures are aligned along a single direction of freezing. However, a caveat to these ceramics has been their ensuing lack of strength and toughness due to their high porosity, especially in the direction orthogonal to the direction of alignment. In this work, a novel freezing casting method referred to as “radial-concentric freeze casting” is presented, which takes its inspiration from the radially and concentrically aligned structure of the defensive sp

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Brandt-Wunderlich, Christoph, Wolfram Schmidt, Alexander Thiesen, et al. "Test methods for evaluation of balloon expandable vascular stents – measurement of radial strength and stiffness." Current Directions in Biomedical Engineering 9, no. 1 (2023): 415–18. http://dx.doi.org/10.1515/cdbme-2023-1104.

Повний текст джерела

Анотація:

Abstract The radial strength of balloon expandable stents represents a key property for a successful recanalization of sclerotic blood vessels. This study focuses on the most commonly used method for investigation of radial strength and radial stiffness via segmented head test setup. A custom made user software was used for evaluation of the radial force curves considering requirements of international standards such as ASTM F3067. Contributing factors during measurement such as friction and test setup deformation as well as the single cycle and multi cycle approach were addressed and discusse

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Mussa, Mahadi, Seyoum Kelemwork, and Mesganaw Wale. "Density and Mechanical Properties of Casuarina equisetifolia Wood Grown in Oromia Regional State, Bishoftu, Ethiopia." Indonesian Journal of Innovation and Applied Sciences (IJIAS) 5, no. 2 (2025): 172–81. https://doi.org/10.47540/ijias.v5i2.1760.

Повний текст джерела

Анотація:

Ethiopia's rapid expansion of urbanization, industrialization, modernization, and population growth has led to an insistently increase in the demand for wood for construction, furniture, and other end products. This study aimed to investigate the effect of tree height and the diameter tree section (sapwood and heartwood) on the density and mechanical properties of Casuarina equisetifolia timber. For this study, ten sample of C. equisetifolia trees were selected and harvested from Bishoftu, Oromia Regional State, Ethiopia. The collected sample logs were sawn into 3-cm-thick lumber, and sample s

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Radial Strength"

1

Ensminger, Alyssa M. "Prediction of Radial Bending Strength by Cortical Porosity and Diameter." Ohio University Honors Tutorial College / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ouhonors149278795178393.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Datye, Amit Vijaykumar. "Elasto-plastic analysis of stents : texture and grainsize effects on radial strength." FIU Digital Commons, 2003. http://digitalcommons.fiu.edu/etd/2739.

Повний текст джерела

Анотація:

A nonlinear finite element analysis of a stent was performed using ABAQUS® to analyze the elasto-plastic behavior during crimping and deploying of the stent and the effects of material properties on various characteristics like radial strength, recoil and foreshortening. Geomteric and material non-linearities are considered since the crimping and deployment of the stent involves large deformations. The stent is meshed using solid elements brick, wedge and tetrahedral elements to model the stent. An elastic-plastic material model described by von Mises-Hill constitutive model is considered due

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Heedman, Linus. "Neurodynamic treatment in combination with manual therapy in patients with persistent lateral elbow pain : A Single Subject Experimental Design study." Thesis, Luleå tekniska universitet, Institutionen för hälsa, lärande och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-85937.

Повний текст джерела

Анотація:

Introduction Lateral elbow pain is a common disorder and affects 1-3 % of the population each year. Beside the typical characterization with pain in restricted dorsal and radial deviation of the wrist and local tenderness of the lateral epicondyle, a neurodynamic dysfunction of the radial nerve can co-exist with the tendon dysfunction. Purpose The aim of the study was to evaluate the effects of individualized neurodynamic treatment in combination with neurodynamic self-treatment in patient with persistent lateral elbow pain with a neurodynamic dysfunction of the radial nerve on grip strength,

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Horváth, Tomáš. "Zážehový sedmiválcový hvězdicový letecký motor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399358.

Повний текст джерела

Анотація:

The aim of this diploma thesis is to propose a drive train of a seven-cylinder radial engine, including strength analysis of selected components. The basic parameters of the engine cylinder are based on the Škoda 1.2 HTP 12V 47kW AZQ engine.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Mettanurak, Thammarat. "Effect of Minimum Suppression and Maximum Release Years on Compression Parallel to Grain Strength and Specific Gravity for Small-sized Yellow-poplar (Liriodendron tulipifera L.) Specimens." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/34804.

Повний текст джерела

Анотація:

Several researchers have concluded that there is little or no relationship between specific gravity and ring width or growth rate in yellow-poplar (Liriodendron tulipifera L.). Because most mechanical properties of wood are also closely related to specific gravity, it would thus be of interest to learn how minimum suppression and maximum release yearsâ evidence that can be extracted from radial growth patterns based on a modified radial growth averaging (RGA) techniqueâ influence the compression parallel to grain strength and specific gravity of wood.<p> This study is designed to evalua

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Amouzgar, Kaveh. "Metamodel based multi-objective optimization." Licentiate thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Produktutveckling - Simulering och optimering, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-28432.

Повний текст джерела

Анотація:

As a result of the increase in accessibility of computational resources and the increase in the power of the computers during the last two decades, designers are able to create computer models to simulate the behavior of a complex products. To address global competitiveness, companies are forced to optimize their designs and products. Optimizing the design needs several runs of computationally expensive simulation models. Therefore, using metamodels as an efficient and sufficiently accurate approximate of the simulation model is necessary. Radial basis functions (RBF) is one of the several met

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Andersson, J. Christer. "Rock Mass Response to Coupled Mechanical Thermal Loading : Äspö Pillar Stability Experiment, Sweden." Doctoral thesis, KTH, Jord- och bergmekanik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4287.

Повний текст джерела

Анотація:

The geological disposal of nuclear waste, in underground openings and the long-term performance of these openings demand a detailed understanding of fundamental rock mechanics. A full scale field experiment: Äspö Pillar Stability Experiment was conducted at a depth of 450 m in sparsely fractured granitic rock to examine the rock mass response between two deposition holes. An oval shaped tunnel was excavated parallel to the σ3 direction to provide access to the experiment and also provide elevated stress magnitudes in the floor. In the tunnel floor two 1.75-m diameter 6-m deep boreholes were ex

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Bouba, Oumarou. "Théories quantique et semi-classique des intégrales radiales de transitions dipolaires et multipolaires des états excités : Applications au calcul des forces d'oscillateur et des probabilités de transition dans l'approximation à une configuration." Orléans, 1986. http://www.theses.fr/1986ORLE0010.

Повний текст джерела

Анотація:

Calcul des intégrales radiales à l'approximation quasi classique (JWKB) des fonctions d'onde radiales, complétée par une description en termes de trajectoires elliptiques de l'électron optique. Obtention d'expressions analytiques de ces intégrales dont on simplifie le calcul à l'aide d'une méthode basée sur le développement limite d'une fonction bien adaptée à des calculs par interpolation ou extrapolation : elles s'expriment toutes en termes de deux fonctions fondamentales qui ne dépendent que de la différence entre deux nombres quantiques principaux effectifs des états initial et final. Dédu

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Peebles, Lynda Renee. "Investigations of Thermochemistry and the Kinetics of H Atom Radical Reactions." Thesis, University of North Texas, 2002. https://digital.library.unt.edu/ark:/67531/metadc3275/.

Повний текст джерела

Анотація:

The thermochemistry of several species, and the kinetics of various H atom radical reactions relevant to atmospheric and combustion chemistry were investigated using ab initio theoretical techniques and the flash photolysis / resonance fluorescence technique. Using ab initio quantum mechanical calculations up to the G3 level of theory, the C-H bond strengths of several alkanes were calculated. The bond strengths were calculated using two working reactions. From the results, it is apparent that the bond strengths decrease as methyl groups are added to the central carbon. The results are in good

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Bow, David Russell. "Mechanical analysis and simulation of the nitrinol ring-stent : assessing the radical strength, fatigue safety and compaction strains." Thesis, University of Strathclyde, 2018. http://digitool.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=30262.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Radial Strength"

1

Liu, Wei-Min. Strength analysis and design of GRP spherical vessels with radial cylindrical branch connections. UMIST, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

J, Cios Krzysztof, and United States. National Aeronautics and Space Administration., eds. Radial basis function network learns ceramic processing and predicts related strength and density. National Aeronautics and Space Administration, 1993.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Hallett, Michael P. Technique for predicting the RF field strength inside an enclosure. National Aeronautics and Space Administration, Goddard Space Flight Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

J, Reddell, and Goddard Space Flight Center, eds. Technique for predicting the RF field strength inside an enclosure. National Aeronautics and Space Administration, Goddard Space Flight Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

J, Reddell, Goddard Space Flight Center, and United States. National Aeronautics and Space Administration., eds. Technique for predicting the RF field strength inside an enclosure. National Aeronautics and Space Administration, Goddard Space Flight Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Hinds, Hilary. ' Strength in weakness manifest': Women's writings from the radical sects of the seventeenth century. University of Birmingham, 1987.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

C, Stanton Alan, and United States. National Aeronautics and Space Administration. Environmental Observation Division., eds. A measurement of the vibrational band strength for the v band of the HO radical. National Aeronautics and Space Administration, Environmental Observation Division, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

P, Reddell Jerry, and Goddard Space Flight Center, eds. Technique for predicting the radio frequency field strength inside an enclosure. National Aeronautics and Space Administration, Goddard Space Flight Center, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

J, Lemmon John, Ketchum Ronald L, and United States. National Telecommunications and Information Administration, eds. Field strength measurements of DGPS and FAA beacons in the 285- to 325-kHz band. U.S. Dept. of Commerce, National Telecommunications and Information Administration, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Morris, Emily. Radio instruction to strengthen education (RISE) in Zanzibar: Learning gains assessment : more than child's play. Education Development Center, 2009.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Radial Strength"

1

Cambronero, L. E. G., P. Sánchez, J. M. Ruiz-Román, J. Pous, and F. A. Corpas. "Radial Crushing Strength of Bronce with Nickel-Graphite Additions." In Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607277.ch51.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Araújo, A. I., M. Martins, J. C. Reis Campos, A. Barros, A. Azevedo, and T. Oliveira. "Influence of the Er,Cr:YSGG laser and radial firing tips on the push-out bond strength of glass fiber posts." In Biodental Engineering V. CRC Press, 2019. http://dx.doi.org/10.1201/9780429265297-19.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Sergeev, Mikhail, Mikhail Lukin, and Marina Popova. "Strength Properties of Wood for Cleavage on Tangential and Radial Planes Impregnated with a Polymer Composition Based on Dimethacrylic Polyester." In Lecture Notes in Civil Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-30570-2_23.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Gordon, M. A., and R. L. Sorochenko. "Hydrogen Oscillator Strengths." In Radio Recombination Lines. Springer New York, 2008. http://dx.doi.org/10.1007/978-0-387-09691-9_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Birkhofer, H., H. D. Beckhaus, and C. Rüchardt. "Substituent Effects on the CC-Bond Strength." In Substituent Effects in Radical Chemistry. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4758-0_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Lakirouhani, Ali, and Somaie Jolfaei. "Conflict Between Fracture Toughness and Tensile Strength in Determining Fracture Strength of Rock Samples with a Circular Hole." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_46.

Повний текст джерела

Анотація:

AbstractIn this article, using a two-dimensional numerical model based on the finite element method, the fracture pressure of rock samples with a circular hole in the center is obtained. In this model, a mixed criterion is used to determine the fracture pressure, which is a combination of the tensile strength criterion and the fracture toughness criterion. The superiority of this model over the tensile strength criterion or the fracture toughness criterion is that it shows well the effect of the size of the hole in the middle of the sample on the fracture stress. The main and innovative findin

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Osvald, Anton, and Jaroslava Štefková. "The Impact of Radiant Heat on the Flexural Strength and Impact Strength in Spruce Wood Bending." In Wood & Fire Safety. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41235-7_11.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Andreu-Hayles, Laia, Mathieu Lévesque, Rossella Guerrieri, Rolf T. W. Siegwolf, and Christian Körner. "Limits and Strengths of Tree-Ring Stable Isotopes." In Stable Isotopes in Tree Rings. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92698-4_14.

Повний текст джерела

Анотація:

AbstractThis chapter aims at summarizing strengths and caveats on the suitability of stable carbon and oxygen isotopes in tree rings as recorders for fingerprints of environmental influences. First, environmental constraints limiting tree growth and shaping tree species distribution worldwide are discussed. Second, examples are presented for environmental conditions under which tree-ring isotopes record environmental signals particularly well, but also cases where physiological processes can mask climate signals. Third, the link between leaf-level carbon assimilation and the investment of assi

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Qiao, Langhao, Renjun Yan, and Yu Qiu. "Fatigue Life Assessment of Ship Hatch Corner Based on Hot Spot Stress Method." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_54.

Повний текст джерела

Анотація:

AbstractThe hatch corner of ship is the most prone area for stress concentration, which makes the fatigue problem of hatch corner particularly serious, and becomes a position that is easily damaged. Firstly, the hot spot stress method based on surface extrapolation is introduced, and the hatch corner of a bulk carrier is selected as the research object, the scale model test is designed and carried out, the finite element model is established, and the parameters of the corner form and different transition radii are analyzed. The CCS calculation specification evaluates the fatigue strength of ha

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Gerber, Julien-François. "From the Soil to the Soul: Fragments of a Theory of Economic Conflicts." In Studies in Ecological Economics. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-22566-6_21.

Повний текст джерела

Анотація:

AbstractThis chapter intends to strengthen the institutional and psychological dimensions of the Barcelona School’s analysis of environmental conflicts. It does so by embedding environmental conflicts into other kinds of struggles over the economy, defined as the various ways by which humans organize their sustenance. It asks: What are the key triggers behind economic conflicts? What kinds of radical ideologies emerge from them? How are they able (or not) to sustain their radical projects? I suggest that the main conflicting points of today’s neoliberal capitalism are related to its metabolism

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Radial Strength"

1

H, Muralidhar, Haider M. Abbas, K. Rajeshkumar, and E. Theerthamali. "Evaluation of Compressive Strength of Self-Consolidating Concrete Using Radial Basis Function Canberra Kernel Based Support Vector Machine Model." In 2025 3rd International Conference on Integrated Circuits and Communication Systems (ICICACS). IEEE, 2025. https://doi.org/10.1109/icicacs65178.2025.10967945.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Nakano, Yuichi, Masataka Kawawaki, and Toshiyuki Sawa. "Stress Analysis and Strength of Adhesive Lap Joints of Dissimilar Hollow Shafts Subjected to Axial Load." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1342.

Повний текст джерела

Анотація:

Abstract The stress and strain distributions in adhesive lap joints of dissimilar hollow shafts subjected to an axial load are examined using an axisymmetric theory of elasticity. The effects of the ratio of Young’s modulus of the adhesive to that of the shaft and of the thickness of the adhesive on the stress distributions at the interfaces in the joint are clarified numerically. It is seen that the stresses in radial and circumferential directions become singular at the ends of the interfaces and the stress increases near the ends of the interface with a decrease of Young’s modulus of the sh

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Mkrtychev, Oleg V., Vladimir A. Turkin, Valery G. Shemanin, and Vladimir V. Belyaev. "Modeling the radial strength of nanocomposite materials." In INTERNATIONAL CONFERENCE ON CONTEMPORARY CHALLENGES IN SCIENCE, ENGINEERING AND ITS APPLICATIONS – Part II: IC3SEA 2023. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0225647.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zangaro, Renato A., R. Barreto da Silva, Landulfo Silveira, Jr., Ricardo E. Medrano, and Marcos T. T. Pacheco. "Optical characterization of optical fiber submitted to radial strength." In European Symposium on Optics for Environmental and Public Safety, edited by Deepak G. Uttamchandani. SPIE, 1995. http://dx.doi.org/10.1117/12.221117.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Hao, Y. X., L. H. Song, and C. F. Wang. "Study on the Deflection Mechanism in Radial Ring Rolling." In The 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2015). WORLD SCIENTIFIC, 2016. http://dx.doi.org/10.1142/9789813140622_0062.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Tian, Yuan, Fengqin Li, Yiqing Gu, Jie Cheng, and Gutian Zhao. "A Review on the Radial Strength of Bioresorbable Coronary Scaffolds." In the 2018 8th International Conference. ACM Press, 2018. http://dx.doi.org/10.1145/3208955.3208960.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Levy-Wendt, Benjamin L., Alaina M. Bever, Nicholaus C. Wright, Timothy J. Venable, John P. Dally, and Frank J. Shih. "Interlaminar Tensile Strength of CFRP Composites Reinforced With Interleaved Carbon Nanotube Sheets." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38876.

Повний текст джерела

Анотація:

Unidirectional carbon-fiber-reinforced polymer (CFRP) composites with interleaved carbon nanotube (CNT) sheets were manufactured using a heated press. The effect of CNT sheets on the interlaminar tensile strength (ILTS) of composite laminates was measured using curved beam bending tests. Two sets of [0]24 T800S/3900-2B specimen were prepared using carbon fiber prepregs and non-woven CNT sheets, with specimen thickness and radial geometries conforming to ASTM D6415. Epoxy resin loaded CNT sheets were inserted in the mid-radius region of curved beam specimens during the lay-up process. The measu

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Laoudias, C., P. Kemppi, and C. G. Panayiotou. "Localization Using Radial Basis Function Networks and Signal Strength Fingerprints in WLAN." In GLOBECOM 2009 - 2009 IEEE Global Telecommunications Conference. IEEE, 2009. http://dx.doi.org/10.1109/glocom.2009.5425278.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Machón, M. "The strength of the radial-breathing mode in single-walled carbon nanotubes." In ELECTRIC PROPERTIES OF SYNTHETIC NANOSTRUCTURES: XVII International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP, 2004. http://dx.doi.org/10.1063/1.1812112.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Xie, Yonghui, Qinghua Deng, Di Zhang, and Zhenping Feng. "Strength Design and Numerical Analysis of Radial Inflow Turbine Impeller for a 100kW Microturbine." In ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68302.

Повний текст джерела

Анотація:

Microturbines usually require a type of radial inflow turbine due to the need for high efficiency under the condition of small mass flow rate and compact geometry. This paper describes the strength design for a 320kW radial inflow turbine impeller during the research and development of 100kW class microturbine. The turbine has a high rotating speed up to 61000rpm and its inlet gas temperature reaches 900°C. Firstly, conventional method is adopted to design the impeller, but the maximum stress predicted by Finite Element Analysis (FEA) greatly exceeds the yield limit of material. In order to sa

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Radial Strength"

1

Graville, B. A. L51707 Factors Affecting Heat Affected Zone Root Strains in Pipeline Girth Welds and Repairs. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0010219.

Повний текст джерела

Анотація:

A previous study on hydrogen cracking in the heat affected zone of pipeline girth welds and repairs found that large strains in the HAZ transverse to the weld played a major role in causing cracking. Large transverse strains were believed to arise from bending of the weld due to the thermal contraction of the weld around the pipe circumference. Large root strains were simulated in the laboratory using a bend test which enabled the effect of material composition and strength to be studied. In the bend test, the specimen deflection at the onset of cracking, indicated by a drop in load, was used

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Nakagawa, T., E. Poulin, T. Rueppel, et al. Effects of thermal modification on the flexure properties, fracture energy, and hardness of western hemlock. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49666.

Повний текст джерела

Анотація:

This study investigates the effect of thermal modification on the flexural properties, transverse fracture energy, and hardness of western hemlock. Flexure tests on specimens featuring longitudinal and transverse grains showed that thermal modification at 167 °C leads to less statistical variability compared to unmodified samples. Additionally, thermal modification leads to a decrease in the transverse flexural strength. On the other hand, the fracture and Janka hardness tests revealed a more pronounced brittleness of the thermally modified samples. The total mode I fracture energy of modified

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kanninen. PR-380-104500-R01 Minimum Permissible Bend Radii for Layered Composite Materials. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010802.

Повний текст джерела

Анотація:

The research utilized a closely coordinated combination of full-scale bend/burst testing and highly detailed finite element analysis (FEA) modeling of representative HPIR constructions in a two-phase iterative approach. The fundamentally sound methodology that was developed and validated in the research has the potential for optimizing the design of HPIR systems in regard to safely negotiating tight bends while renewing energy transmission pipelines in a wide range of operating conditions. The combination of FEA modeling and the full-scale bend/burst testing utilized in this research has led t

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Shen, Oscar, Wen-Chih Liu, and Chih-Ting Chen. Effectiveness and safety of volar locked plate, K-wiring and external fixator, and the conservative treatment for distal radius fracture in the elderly: Systematic review and Network meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.12.0009.

Повний текст джерела

Анотація:

Review question / Objective: Patient/Problem: The elder(age>60), with distal radius fracture; Intervention: conservative treatment; Comparison of intervention: volar locked plate, K-wire, external fixator; Clinical Outcome: Grip strength, Disabilities of the Arm, Shoulder, and Hand, Patient-rated wrist evaluation score, range of motion. Condition being studied: The elder(age>60) with distal radius fracture, received conservative treatment or surgical treatment.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Jaramillo-Echeverri, Juliana. Waves of Change? Radio announcements and fertility decline. Banco de la República, 2024. http://dx.doi.org/10.32468/chee.65.

Повний текст джерела

Анотація:

Can radio campaigns affect fertility? This paper examines the impact of a national radio campaign promoting family planning clinics in late 1960s Colombia on the country's rapid fertility decline. The campaign, initiated by Profamilia in 1969, provided information about the location of clinics without giving detailed contraceptive information. Using data from the full count 1973 census and information on clinic locations and radio programs, the study leverages exogenous variation in radio signal strength to estimate the campaign's effect on fertility. I follow a difference-in-differences strat

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, et al. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42132.

Повний текст джерела

Анотація:

The properties of composite materials are strongly influenced by both the physical and chemical properties of their individual constituents, as well as the interactions between them. For nanocomposites, the incorporation of nano-sized dopants inside a host material matrix can lead to significant improvements in mechanical strength, toughness, thermal or electrical conductivity, etc. In this work, the effect of cellulose nanofibrils on the structure and mechanical properties of cellulose nanofibril poly(vinylidene fluoride) (PVDF) composite films was investigated. Cellulose is one of the most a

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Gangrao, Hota V. S., Udaya B. Halabe, John Zondlo, et al. DTPH56-16-HCAP-02 Glass-Polymer Composite High Pressure Pipes and Joints-Design, Manufacture. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011841.

Повний текст джерела

Анотація:

The project focuses on developing glass fiber reinforced polymer (GFRP) composite pipes including a range of joining systems. A few of the many advantages of GFRP composite pipes are their non-corrosiveness, magnetic transparency, and high strength-to-weight ratio. As a part of this project, GFRP pipes and joints were designed, manufactured, and evaluated under static loads. Emphasis was placed in the evaluation of stress-rupture (burst pressure) of GFRP composite pipes that could withstand internal pressures as high as 5000 psi. The report also includes the design and testing of high-pressure

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Al-Qadi, Imad, Qingqing Cao, Lama Abufares, Siqi Wang, Uthman Mohamed Ali, and Greg Renshaw. Moisture Content and In-place Density of Cold-Recycling Treatments. Illinois Center for Transportation, 2022. http://dx.doi.org/10.36501/0197-9191/22-007.

Повний текст джерела

Анотація:

Cold-recycling treatments are gaining popularity in the United States because of their economic and environmental benefits. Curing is the most critical phase for these treatments. Curing is the process where emulsion breaks and water evaporates, leaving residual binder in the treated material. In this process, the cold-recycled mix gains strength. Sufficient strength is required before opening the cold-treated layer to traffic or placing an overlay. Otherwise, premature failure, related to insufficient strength and trapped moisture, would be expected. However, some challenges arise from the la

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Kerrigan, Susan, Phillip McIntyre, and Marion McCutcheon. Australian Cultural and Creative Activity: A Population and Hotspot Analysis: Ballarat. Queensland University of Technology, 2020. http://dx.doi.org/10.5204/rep.eprints.206963.

Повний текст джерела

Анотація:

Description Ballarat sits on Wathaurong land and is located at the crossroads of four main Victorian highways. A number of State agencies are located here to support and build entrepreneurial activity in the region. The Ballarat Technology Park, located some way out of the heart of the city at the Mount Helen campus of Federation University, is an attempt to expand and diversify the technology and innovation sector in the region. This university also has a high profile presence in the city occupying part of a historically endowed precinct in the city centre. Because of the wise preservation an

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Lasko, Kristofer. Incorporating Sentinel-1 SAR imagery with the MODIS MCD64A1 burned area product to improve burn date estimates and reduce burn date uncertainty in wildland fire mapping. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42122.

Повний текст джерела

Анотація:

Wildland fires result in a unique signal detectable by multispectral remote sensing and synthetic aperture radar (SAR). However, in many regions, such as Southeast Asia, persistent cloud cover and aerosols temporarily obstruct multispectral satellite observations of burned area, including the MODIS MCD64A1 Burned Area Product (BAP). Multiple days between cloud free pre- and postburn MODIS observations result in burn date uncertainty. We incorporate cloud-penetrating, C-band SAR-with the MODIS MCD64A BAP in Southeast Asia, to exploit the strengths of each dataset to better estimate the burn dat

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!