Увійти

Готові списки джерел за темами / Radial Strength / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Radial Strength.

Статті в журналах з теми "Radial Strength"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Radial Strength".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Hu, La, Lizhe Qin, Dongshan Wu, Huilan Xu, and Zhangqi Yang. "Radial variation in bonding performance of preservative-treated wood within Pinus elliottii trees and its relationships with wood density and adhesive penetration." BioResources 16, no. 2 (2021): 2204–14. http://dx.doi.org/10.15376/biores.16.2.2204-2214.

Повний текст джерела

Анотація:

Pinus elliottii wood from different radial locations within trees was used to prepare two-layer preservative-treated wood joints with alkaline copper quaternary preservative and emulsion polymer isocyanates (EPI) or resorcinol-phenol-formaldehyde (RPF) adhesives. The radial variations in shear strength and wood failure percentage were analyzed. Radial variations in wood density and average penetration depth (AP) of adhesives were investigated to establish relationships between shear strengths and characteristics of bonded joints. The shear strengths of EPI- and RPF-bonded joints showed similar

Стилі APA, Harvard, Vancouver, ISO та ін.

2

郭, 良栋. "Radial Load Screw Strength Check Method." Mechanical Engineering and Technology 08, no. 06 (2019): 526–34. http://dx.doi.org/10.12677/met.2019.86061.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Yadav, Amit, Sagar Bansal, Mrinal Kambli, Shaswat Mishra, and Devenshu Gupta. "A Comparative Study Showing Elbow Kinematics in Radial Head Replacement Versus Radial Head Excision Versus Radial Head Fixation." Trauma International 8, no. 2 (2022): 1–5. http://dx.doi.org/10.13107/ti.2022.v08i02.026.

Повний текст джерела

Анотація:

Background: Radial head fractures are quite common with incidence 1.5-4% of all adult fractures. The management of these fractures depends upon age and type of injury Aim: To compare the outcome in comminuted radial head fractures(Mason type III) based on mayo elbow scoring and handgrip strength test when managed with radial head excision, radial head fixation or radial head replacement Material and Methods: We did a prospective comparative study comprising 60 patients between age 20-60 years with Mason type III radial head fractures. The patients were randomised using the admission day of the

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Cook, Robert F., and David H. Roach. "The effect of lateral crack growth on the strength of contact flaws in brittle materials." Journal of Materials Research 1, no. 4 (1986): 589–600. http://dx.doi.org/10.1557/jmr.1986.0589.

Повний текст джерела

Анотація:

The effect of lateral cracks on strength controlling contact flaws in brittle materials is examined. Inert strength studies using controlled indentation flaws on a range of ceramic, glass, and single crystal materials reveal significant increases in strength at large contact loads, above the predicted load dependence extrapolated from strength measurements at low indentation loads. The increases are explained by the growth of lateral cracks decohesing the plastic deformation zone associated with the contact from the elastically restraining matrix, thereby reducing the residual stress field dri

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Waktole, Samson, Mahadi Mussa, Lamesa Abara, Misganaw Wale, and Kassahun Mogninet. "Investigation of Physical and Mechanical Properties and Their Relationship in Senegalia caffra Wood Grown in Northern Ethiopia." Indonesian Journal of Innovation and Applied Sciences (IJIAS) 5, no. 1 (2025): 58–69. https://doi.org/10.47540/ijias.v5i1.1767.

Повний текст джерела

Анотація:

This research focused on determining the physical and mechanical properties of Senegalia caffra collected from a Gilgile Beles site in Ethiopia and analyzing how these properties relate to the wood's performance. Fifteen (15) sample trees were selected and felled for the study. Sampling, specimen preparation, and conducting the different tests were achieved following ISO and British standards. In this study, the mean basic density of 594.40 Kg/m3, modulus of elasticity (MoE) of 9,556.79 N/mm2, modulus of rupture (MoR) of 105.69 N/mm2, compression strength parallel to the grain of 53.15 N/mm, i

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Tomczak, Arkadiusz, and Tomasz Jelonek. "Radial variation in the wood properties of Scots pine (Pinus sylvestris L.) grown on former agricultural soil." Forest Research Papers 74 (2) (March 1, 2013): 171–77. https://doi.org/10.2478/frp-2013-0017.

Повний текст джерела

Анотація:

The soil of former farmland greatly differs from forest soil, and significantly influences tree growth and development compared with other site factors. The effect may also be reflected indirectly in radial variability of wood. This study compared radial variation of wood density, compressive strength along the grain and static bending strength of wood of Scots pine trees growing on former farmland and forest soils. The analyses were conducted in eight mature pine stands. On the basis of the stand description, four stands were classified as growing on forest soil (L) and four as growing on for

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Mackinnon, Susan E., Brandon Roque, and Thomas H. Tung. "Median to radial nerve transfer for treatment of radial nerve palsy." Journal of Neurosurgery 107, no. 3 (2007): 666–71. http://dx.doi.org/10.3171/jns-07/09/0666.

Повний текст джерела

Анотація:

✓The purpose of this study is to report a surgical technique of nerve transfer to restore radial nerve function after a complete palsy due to a proximal injury to the radial nerve. The authors report the case of a patient who underwent direct nerve transfer of redundant or expendable motor branches of the median nerve in the proximal forearm to the extensor carpi radialis brevis and the posterior interosseous branches of the radial nerve. Assessment included degree of recovery of wrist and finger extension, and median nerve function including pinch and grip strength. Clinical evidence of reinn

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Su, Frances, Joyce Mok, and Joanna McKittrick. "Radial-Concentric Freeze Casting Inspired by Porcupine Fish Spines." Ceramics 2, no. 1 (2019): 161–79. http://dx.doi.org/10.3390/ceramics2010015.

Повний текст джерела

Анотація:

Freeze casting is a technique used to manufacture porous ceramics with aligned microstructures. In conventional freeze casting, these microstructures are aligned along a single direction of freezing. However, a caveat to these ceramics has been their ensuing lack of strength and toughness due to their high porosity, especially in the direction orthogonal to the direction of alignment. In this work, a novel freezing casting method referred to as “radial-concentric freeze casting” is presented, which takes its inspiration from the radially and concentrically aligned structure of the defensive sp

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Brandt-Wunderlich, Christoph, Wolfram Schmidt, Alexander Thiesen, et al. "Test methods for evaluation of balloon expandable vascular stents – measurement of radial strength and stiffness." Current Directions in Biomedical Engineering 9, no. 1 (2023): 415–18. http://dx.doi.org/10.1515/cdbme-2023-1104.

Повний текст джерела

Анотація:

Abstract The radial strength of balloon expandable stents represents a key property for a successful recanalization of sclerotic blood vessels. This study focuses on the most commonly used method for investigation of radial strength and radial stiffness via segmented head test setup. A custom made user software was used for evaluation of the radial force curves considering requirements of international standards such as ASTM F3067. Contributing factors during measurement such as friction and test setup deformation as well as the single cycle and multi cycle approach were addressed and discusse

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Mussa, Mahadi, Seyoum Kelemwork, and Mesganaw Wale. "Density and Mechanical Properties of Casuarina equisetifolia Wood Grown in Oromia Regional State, Bishoftu, Ethiopia." Indonesian Journal of Innovation and Applied Sciences (IJIAS) 5, no. 2 (2025): 172–81. https://doi.org/10.47540/ijias.v5i2.1760.

Повний текст джерела

Анотація:

Ethiopia's rapid expansion of urbanization, industrialization, modernization, and population growth has led to an insistently increase in the demand for wood for construction, furniture, and other end products. This study aimed to investigate the effect of tree height and the diameter tree section (sapwood and heartwood) on the density and mechanical properties of Casuarina equisetifolia timber. For this study, ten sample of C. equisetifolia trees were selected and harvested from Bishoftu, Oromia Regional State, Ethiopia. The collected sample logs were sawn into 3-cm-thick lumber, and sample s

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Fong, Shirley S. M., X. Guo, Alice P. M. Cheung, et al. "Elder Chinese Martial Art Practitioners Have Higher Radial Bone Strength, Hand-Grip Strength, and Better Standing Balance Control." ISRN Rehabilitation 2013 (July 9, 2013): 1–6. http://dx.doi.org/10.1155/2013/185090.

Повний текст джерела

Анотація:

This study explored the feasibility of using Ving Tsun (VT) martial art as a fall-prevention exercise for male seniors. We compared the radial bone strength, hand-grip strength, and standing balance control of senior VT practitioners and nonpractitioners under various sensory environments. Sixteen male VT practitioners (mean age ± SD: years) and 17 sex- and age-matched control adults (mean age ± SD: years) participated in the study. The bone strength of the distal radius, hand-grip strength, and standing balance control were assessed using an ultrasound bone sonometer, a Jamar dynamometer, and

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Gupta, Aman, Lalit Jain, Bhupender Dutt, Rajneesh Kumar, and Sonika Sharma. "Behavioral change in physical, anatomical, and mechanical characteristics of thermally treated Pinus roxburghii wood." BioResources 18, no. 4 (2023): 7769–95. http://dx.doi.org/10.15376/biores.18.4.7769-7795.

Повний текст джерела

Анотація:

Thermal treatment of pine wood was carried out at 80, 120, 160, and 200 °C for 2, 4, and 6 hours. The highest mean values were, for specific gravity (0.492), moisture content (29.1%), and maximum moisture content (191%), whereas the lowest mean values were for specific gravity (0.418), moisture content (1.20%), and maximum moisture content (127%). The maximum mean values were for shrinkage in longitudinal plane (0.42%), radial plane (4.63%), volumetric shrinkage (9.28%), and maximum mean value tangential plane (3.67%). The minimum mean values were for shrinkage in longitudinal plane (0.04%), r

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Dabash, Sherif, Eric Potter, Elizabeth Pimentel, et al. "Radial Plate Fixation of Distal Radius Fracture." HAND 15, no. 1 (2018): 103–10. http://dx.doi.org/10.1177/1558944718787290.

Повний текст джерела

Анотація:

Background: A radial incision with radial plate fixation for distal radius fracture has historically been avoided due to its risk to the superficial branch of the radial nerve (SBRN). With careful technique, it is possible to avoid injury to the SBRN, thereby minimizing the soft tissue injury associated with other approaches. We compare subjective and objective functional outcomes of radial plate fixation surgeries that we performed with those of dorsal and volar plate fixation in current literature. Methods: Patients at a single center who underwent radial plate fixation for an AO type A or A

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Naylor, Jason F., Andrew D. Fisher, Michael D. April, and Steven G. Schauer. "An analysis of radial pulse strength to recorded blood pressure in the Department of Defense Trauma Registry." Military Medicine 185, no. 11-12 (2020): e1903-e1907. http://dx.doi.org/10.1093/milmed/usaa197.

Повний текст джерела

Анотація:

Abstract Introduction Hemorrhage is the leading cause of potentially preventable death on the battlefield. The tactical combat casualty care guidelines recommend the use of the radial pulse strength to guide the administration of blood products or intravenous fluids when equipment for blood pressure monitoring is not available. Data supporting this measurement tool are limited. We sought to validate this method in a deployed trauma population. Materials and Methods This is a secondary analysis of a previously published dataset from the Department of Defense Trauma Registry. In this subanalysis

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Zhang, Lingfeng, Biao Xu, Zhongjie Fang, et al. "Experimental Study on the Bending and Shear Behaviors of Chinese Paulownia Wood at Elevated Temperatures." Polymers 14, no. 24 (2022): 5545. http://dx.doi.org/10.3390/polym14245545.

Повний текст джерела

Анотація:

Chinese Paulownia wood has been extensively used in the construction of timber buildings and lightweight sandwich structures. However, the bending and shear behaviors at elevated temperatures were not well understood. A total of 162 specimens were tested to investigate the bending, tangential shear, and radial shear performances of Chinese Paulownia wood under temperatures from 20 to 220 °C. It was found that the bending specimens exhibited ductile failure due to the progressive damage after reaching the peak load, while the tangential and radial shear specimens exhibited brittle shear failure

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kettunen, Pentti O., Taina Vuoristo, and Terho Kaasalainen. "Monotonic Strength Properties of Siberian Yellow Pine." Materials Science Forum 599 (September 2008): 137–42. http://dx.doi.org/10.4028/www.scientific.net/msf.599.137.

Повний текст джерела

Анотація:

Strength values of the sapwood of Siberian yellow pine were measured in a system with orthogonal coordinates along the axial, radial, and tangential directions of the cell structure. Highest strength was the axial normal strength and lowest the tangential normal strength. The difference between these two values was 87-fold. Shear strength values remained between the two normal strength values. The highest shear strength appeared in tangential direction across the reinforcing fibers, i.e., on the plane perpendicular to the axial direction. Lowest shear strength appeared in tangential direction

Стилі APA, Harvard, Vancouver, ISO та ін.

17

KATAYAMA, Kaoru, and Shinnichi YAMAZAKI. "A strength analysis of ceramic radial turbine rotors." Transactions of the Japan Society of Mechanical Engineers Series A 52, no. 481 (1986): 2182–86. http://dx.doi.org/10.1299/kikaia.52.2182.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Nahas, M. N. "Radial impact strength of fibre-reinforce composite tubes." Journal of Materials Science 22, no. 2 (1987): 657–62. http://dx.doi.org/10.1007/bf01160784.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

GOMI, Masaki, and Fumiko SUGIYAMA. "Evaluation of radial strength of collapsible half cylinder." Proceedings of the Dynamics & Design Conference 2019 (2019): 448. http://dx.doi.org/10.1299/jsmedmc.2019.448.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

de la Cruz Torres, Blanca. "Strength–Duration Curves of Radial Nerve in Patients With Lateral Elbow Pain." Journal of Sport Rehabilitation 29, no. 6 (2020): 754–59. http://dx.doi.org/10.1123/jsr.2018-0405.

Повний текст джерела

Анотація:

Context:Lateral epicondylalgia (LE) refers to a painful condition at or around the lateral epicondyle of the humerus. LE is one of the most common injuries of the elbow; however, the cause of the pathology is not clear. Patients often experience symptoms consistent with a radial nerve injury; however, data on the involvement of the radial nerve are needed.Objective:To analyze the relationship between electrophysiologic excitability and morphology of the radial nerve in patients with unilateral chronic LE.Design:Cross-sectional study.Setting:Department of Physiotherapy, University of Seville.Pa

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Panjaitan, Maraden, Lawalenna Samang, Achmad Bakri Muhiddin, and Tri Harianto. "The Effect of Heat Induction on Shear Strength of Soft Soil in Radial Zone." Materials Science Forum 998 (June 2020): 329–34. http://dx.doi.org/10.4028/www.scientific.net/msf.998.329.

Повний текст джерела

Анотація:

The main problem in infrastructure development at the soft clay was its bearing capacity therefore it needs to be improved. In this research, the improvement method was carried out by modeling in small scale of preloading and heat induction combination. Location of soft clay sampling was in Takalar, Indonesia. The purpose of this study was to investigate the change of the shear strength of soft soil corresponding with heat induction at the radial zone. The shear strength was obtained by vane shear test and compressive strength from unconfined compressive test (UCT). The heat applied ranging fr

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Gaol, Nur Indah Lumban, Fanny Hidayati, Widyanto Dwi Nugroho, Harry Praptoyo, Oka Karyanto, and Sri Nugroho Marsoem. "Sifat Fisika dan Mekanika Kayu Acacia aulacocarpa dari KHDTK Wanagama." Jurnal Ilmu Pertanian Indonesia 28, no. 4 (2023): 630–40. http://dx.doi.org/10.18343/jipi.28.4.630.

Повний текст джерела

Анотація:

This study aims to determinethe physical properties and mechanical properties at axial (base, middle, and top) and radial (near the pith, middle, and near the bark) positions, as well as the relationship between the specific gravity and mechanical properties of Acacia aulacocarpa wood. Three 27-year-old trees planted at KHDTK Wanagama wereused. Wood physical and mechanical propertieswere tested per British Standard 373:1957. The statistical analysis used was a two-way ANOVA and a follow-up test of Tukey HSD. The results showed that the average moisture content was 98.95%; the green and air-dry

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Wang, Wan, Lin He, Xue Feng Zhao, and Guang Xi Li. "Design of Hybrid Composite Multilayer Rim of High Speed Energy Storage Flywheels." Advanced Materials Research 500 (April 2012): 603–7. http://dx.doi.org/10.4028/www.scientific.net/amr.500.603.

Повний текст джерела

Анотація:

The large flywheel energy storage system requires very high radial tensile strength of the flywheel rim, for the sake of the ultimate strength requirement, multilayer flywheel rim structure of carbon fiber/glass fiber hybrid composite is employed in the paper. Both stress calculation and FEM analysis show that rational densign of the layer thickness and the hybrid ratio of carbon fiber to glass fiber can reduce radial strength requirement of rim material, especially for large flywheel energy storage system.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Wang, Guotai, Xingguang Geng, Xiaoxiao Kang, Yitao Zhang, Jun Zhang, and Haiying Zhang. "A Novel Radial Artery P-S Curve Model Based on Radial Vibration of Vascular Wall." Applied Sciences 12, no. 19 (2022): 9706. http://dx.doi.org/10.3390/app12199706.

Повний текст джерела

Анотація:

In pulse wave analysis, the changing curve of pulse wave strength with continuous increasing pressure, that is, the P-S (pressure-strength) curve, contains abundant human physiological information, but there is no accurate model to describe the formation mechanism of the curve. Therefore, this paper proposes a modeling method of the radial artery P-S curve based on the radial vibration of the vascular wall. The modeling method includes three parts. Firstly, based on hemodynamics, we proposed the blood motion equation in the pulsation process of healthy people. Secondly, the motion equation of

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Mahoney, Sean, Lukus Klawitter, Kyle J. Hackney, et al. "Examining Additional Aspects of Muscle Function with a Digital Handgrip Dynamometer and Accelerometer in Older Adults: A Pilot Study." Geriatrics 5, no. 4 (2020): 86. http://dx.doi.org/10.3390/geriatrics5040086.

Повний текст джерела

Анотація:

Background: Maximal handgrip strength (HGS) could be an incomplete and unidimensional measure of muscle function. This pilot study sought to examine the relationships between maximal HGS, radial and ulnar digit grip strength, submaximal HGS force control, HGS fatigability, neuromuscular HGS steadiness, and HGS asymmetry in older adults. Methods: A digital handgrip dynamometer and accelerometer was used to collect several HGS measurements from 13 adults aged 70.9 ± 4.0 years: maximal strength, radial and ulnar digit grip strength, submaximal force control, fatigability, neuromuscular steadiness

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Peter, Šlesar, and Jančo Roland. "Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage." Strojnícky časopis - Journal of Mechanical Engineering 70, no. 1 (2020): 127–34. http://dx.doi.org/10.2478/scjme-2020-0012.

Повний текст джерела

Анотація:

AbstractThe objective of these analyzes is to evaluate the behaviour of bearing cage in operation and to determinate the safety factor towards to yield and ultimate strength of structure, when cage is under load. Safety factor can be defined as force needed to achieve yield or ultimate strength divided by operation force given from dynamic simulation. Second analyze was based on pressing of whole cage in radial direction to determinate radial pressing force needed to achieve yield and ultimate strength.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Król, Piotr, Andrzej Franek, Jacek Durmała, et al. "Focused and Radial Shock Wave Therapy in the Treatment of Tennis Elbow: A Pilot Randomised Controlled Study." Journal of Human Kinetics 47, no. 1 (2015): 127–35. http://dx.doi.org/10.1515/hukin-2015-0068.

Повний текст джерела

Анотація:

AbstractThe purpose of this article was to evaluate and compare the efficacy of radial and focused shock wave therapies applied to treat tennis elbow. Patients with tennis elbow were randomized into two comparative groups: focused shock wave therapy (FSWT; n=25) and radial shock wave therapy (RSWT; n=25). Subjects in the FSWT and RSWT groups were applied with a focused shock wave (3 sessions, 2000 shocks, 4 Hz, 0.2 mJ/mm2) and a radial shock wave (3 sessions, 2000 + 2000 shocks, 8 Hz, 2.5 bar), respectively. The primary study endpoints were pain relief and functional improvement (muscle streng

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Mikkola, Daniel, Paul J. McMillan, and David Hobbs. "Radial migration and vertical action in N-body simulations." Monthly Notices of the Royal Astronomical Society 495, no. 3 (2020): 3295–306. http://dx.doi.org/10.1093/mnras/staa1223.

Повний текст джерела

Анотація:

ABSTRACT We study the radial migration of stars as a function of orbital action as well as the structural properties of a large suite of N-body simulations of isolated disc galaxies. Our goal is to establish a relationship between the radial migration efficiency of stars and their vertical action. We aim to describe how that relationship depends on the relative gravitational dominance between the disc and the dark matter halo. By changing the mass ratio of our disc and dark matter halo, we find a relationship between disc dominance, number, and strength of spiral arms, and the ensuing radial m

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Mejia, Alfonso, Giovanni Solitro, Elena Gonzalez, Amit Parekh, Mark Gonzalez, and Farid Amirouche. "Pullout Strength After Multiple Reinsertions in Radial Bone Fixation." HAND 15, no. 3 (2018): 393–98. http://dx.doi.org/10.1177/1558944718795510.

Повний текст джерела

Анотація:

Background: Due to bone cutting loss from self-tapping screws (STS), progressive destruction of bone can occur with each reinsertion during surgery. When considering the use of jigs that utilize multiple insertions such as those seen in ulnar and radial shortening osteotomy systems, or scenarios where a screw needs to be removed and reinserted due to some technical issue, this can be concerning, as multiple studies examining the effects of multiple reinsertions and the relationship between insertional torque and pullout strength have had mixed results. Methods: Insertional torque and pullout s

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Zhang, Fenghao, Sidong Wang, Jinghui Jiang, Dongsheng Chen, and Haibin Zhou. "Effects of Growth Ring Width, Height from Tree Base, and Loading Direction on Transverse Compression of Plantation Japanese Larch Wood." Forests 14, no. 7 (2023): 1451. http://dx.doi.org/10.3390/f14071451.

Повний текст джерела

Анотація:

This study aimed to investigate the effects of growth ring width, height from the tree base, and loading direction on the transverse compressive strength of Japanese larch wood, which is commonly used in wood structures in China. Plantation wood is often used to replace natural forest woods for reconstruction purposes, despite significant differences in properties (e.g., growth rings, density, strength) between them. The ends of transversely compressed wood members in such structures are prone to damage by breaking or crushing. A transverse compressive test was conducted following Chinese nati

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Hohmann, Erik, Mahendrakumar Meta, Vasudev Navalgund, and Kevin Tetsworth. "The relationship between radiological alignment of united distal radius fractures and functional and patient-perceived outcomes in elderly patients." Journal of Orthopaedic Surgery 25, no. 1 (2017): 230949901668497. http://dx.doi.org/10.1177/2309499016684976.

Повний текст джерела

Анотація:

Purpose: The purpose of this study was to investigate the relationship between radiological alignment and functional outcomes including strength, range of motion (ROM), and disabilities of the arm, shoulder, and hand (DASH) and patient-rated wrist evaluation (PRWE) scores in elderly patients with united distal radius fractures. Methods: We reviewed 118 patients (mean age of 76.2 ± 9.5 years, mean follow-up 36.3 ± 17.6 months). Outcome measures included the DASH and PRWE scores, ROM, and grip and pinch strength were measured using a validated mobile hand-held dynamometer. Radial height, radial

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Shahzeb, Mir Arif Hussain, Nabiha, Mubin Mustafa Kiyani, Nimra Sohail, and Syeda Rahmeen Dua. "DRY NEEDLING AND NEURAL MOBILIZATION TECHNIQUES IN RADIAL TUNNEL SYNDROME: A RANDOMIZED CONTROLLED TRIAL." Insights-Journal of Health and Rehabilitation 3, no. 2 (Health & Rehab) (2025): 255–62. https://doi.org/10.71000/t5e6wb40.

Повний текст джерела

Анотація:

Background: Radial nerve entrapment is a common peripheral neuropathy that leads to pain, muscle weakness, and functional impairment. Various conservative treatments, including dry needling and peripheral neural mobilization, have been explored for symptom management. However, limited evidence exists regarding the combined efficacy of these interventions in improving pain, grip strength, and functional disability. Establishing an effective rehabilitation approach could enhance patient outcomes and optimize treatment strategies for radial nerve entrapment syndrome. Objective: To compare the eff

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Zhang, Lingfeng, Qianyi Li, Weiqing Liu, Qian He, Yan Liu, and Kai Guo. "Evaluation of the Shear Performance of Douglas-Fir Wood at Elevated Temperatures." Materials 15, no. 23 (2022): 8386. http://dx.doi.org/10.3390/ma15238386.

Повний текст джерела

Анотація:

Shear fracture frequently occurs in timber beams and panels subjected to transverse loads. At elevated temperatures, wood will undergo complex physical and chemical processes which significantly affect the shear properties. In this paper, the v-notched Douglas-fir specimens with three different shear planes: (a) Radial-Tangential (RT); (b) Radial-Longitudinal (RL), and (c) Longitudinal-Radial (LR), were fabricated and tested under the elevated temperatures from 20 °C to 180 °C. The digital image correlation (DIC) technique was used to measure the shear strain. It was found that the shear plane

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Napper, Alexis D., Meera K. Sayal, Michael W. R. Holmes, and Alan C. Cudlip. "Sex differences in wrist strength: a systematic review." PeerJ 11 (December 14, 2023): e16557. http://dx.doi.org/10.7717/peerj.16557.

Повний текст джерела

Анотація:

Sex differences in strength have been attributed to differences in body anthropometrics and composition; these factors are often ignored when generating workplace guidelines. These differences directly impact the upper extremity, leaving female workers exposed to injury risk. The wide range of tools and techniques for measuring upper extremity strength presents a challenge to ergonomists and work task designers; collating outcomes to provide a clear outlook of differences between males and females is essential and the purpose of this work. Four online databases were searched (PROSPERO ID: CRD4

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Nallakaruppan, V., E. Y. Tung, S. J. Sebastin, T. Karjalainen, and Y. P. Peng. "The effect of blocking radial abduction on palmar abduction strength of the thumb." Journal of Hand Surgery (European Volume) 37, no. 3 (2011): 269–74. http://dx.doi.org/10.1177/1753193411419945.

Повний текст джерела

Анотація:

The measurement of palmar abduction strength of the thumb (PAST) is often used as a research tool to provide an objective assessment of thenar muscle function in patients with carpal tunnel syndrome (CTS). The purpose of this study is to determine the effect of blocking radial abduction on PAST in a normal population. PAST was measured for both hands of 100 healthy volunteers in two positions. In the first position a vertical board was placed perpendicular to the radial border of the hand to block radial abduction, and in the second position PAST was measured without the board. Men had greater

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Li, Zhenyu, Gang Wang, Xiangyu Wang, et al. "Semi-Analytical Methods for the Joint Strength and Sealing Performance in the Failure Process of the Subsea Pipeline Compression Connector." Journal of Marine Science and Engineering 11, no. 7 (2023): 1417. http://dx.doi.org/10.3390/jmse11071417.

Повний текст джерела

Анотація:

Radial seals are sensitive to axial overload failure and may cause leaks. This paper presents two semi-analytical methods for the joint strength and sealing performance of the subsea pipeline compression connector under axial overload failure. The method for the joint strength consists of two parts: One is the analytical model for the joint strength of the connection and seal under axial tension and compression conditions. The models are based on membrane theory, considering the hardening and bending effects. The other is a two-dimensional, axisymmetric finite element model for the joint stren

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Štefić, Tihomir, Aleksandar Jurić, and Pavao Marović. "Analysis of Shear Strength of Wood." Key Engineering Materials 488-489 (September 2011): 650–53. http://dx.doi.org/10.4028/www.scientific.net/kem.488-489.650.

Повний текст джерела

Анотація:

This paper presents the analysis of different types of shear strength of wood which can differ very much due to its structure and different orientations of applied load. These combinations of wood structure and load orientations lead to different modes of fracture. The main aim of the paper is to find a relation among all types of shear strength of the wood and to reduce the number of shear tests. Furthermore, different shear strengths will be analyzed both experimentally and numerically, i.e. experimentally by testing appropriate specimens and numerically with the help of the finite element s

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Gao, Y. C., M. M. Li, W. T. Yang, R. Hu, and Y. C. Zhang. "Research on the relationship between filling pattern and mechanical strength in 3D printing." Journal of Physics: Conference Series 2478, no. 3 (2023): 032080. http://dx.doi.org/10.1088/1742-6596/2478/3/032080.

Повний текст джерела

Анотація:

Abstract 3D printing technology provides a new technical approach for the preparation of complex-type gun propellants. The filling pattern chosen for printed gun propellants has an impact on the mechanical strength of gun propellants. In this paper, three filling patterns were used to print the gun propellant samples. There is axial, radial and 45° straight filling pattern. The tensile and compressive strength of samples with different filling patterns were compared and studied. The result shows that the tensile strength of samples printed with 45° straight filling pattern is the largest, and

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Ljungdahl, Jonas, Lars A. Berglund, and Magnus Burman. "Transverse anisotropy of compressive failure in European oak – a digital speckle photography study." Holzforschung 60, no. 2 (2006): 190–95. http://dx.doi.org/10.1515/hf.2006.031.

Повний текст джерела

Анотація:

Abstract The mechanical behaviour of European oak (Quercus robur L.) was studied in radial and tangential compression. Young's modulus and the yield strength were approximately 1.7- and 1.6-fold higher, respectively, in the radial direction. Strain fields were determined by digital speckle photography (DSP). Strains and the effective Poisson ratio could be determined separately in earlywood and latewood during deformation and failure events. In radial compression, strain data showed that rays contributed significantly to the high modulus. In addition, multiseriate ray microbuckling was observe

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Cao, Guangmei, Rubin Shmulsky, Ming Liu, Edward D. Entsminger, Brian K. Via, and Hui Wan. "Characterizing Star-sawn Pattern–Produced and Orthogonally Glued Specimens of Southern Pine." Forest Products Journal 69, no. 1 (2019): 53–60. http://dx.doi.org/10.13073/fpj-d-18-00031.

Повний текст джерела

Анотація:

Abstract In this study, triangular specimens of southern pine (Pinus spp.; SP) generated by a star-sawn process were characterized according to knots and deformation. SP specimens were used to understand the differences among glue-line combinations of radial-to-radial, radial-to-tangential, and tangential-to-tangential faces bonded with phenol resorcinol formaldehyde resin. The specimens were tested for shear strength, dimensional stability, wood failure, and delamination rate in accordance with ASTM D1037 and D2559 standards. Among the star-sawn triangular samples studied, bows in tangential-

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Zhong, Wei Zhou, Xi Cheng Huang, Zhi Ming Hao, Ruo Ze Xie, and Gang Chen. "Energy Absorption of Spruce Wood under Three Kinds of Quasi-Static Compression Conditions." Advanced Materials Research 250-253 (May 2011): 3–9. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.3.

Повний текст джерела

Анотація:

The curves of stress versus strain along spruce wood axial, radial and tangential directions are gained by static compression experiments. Moisture content and density of the spruce wood are 12.72% and 413 kg/m3respectively. The results indicate that spruce compression process includes elastic, yield and compaction phases. Failure modes of spruce subjected to axial compression are fiber buckling and wrinkle. And failure modes under radial or tangential compression are wood fiber slippage and delamination. Axial compression yield strength is about nine times as that of radial and tangential com

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Chen, Tao, Qin Bing Li, and Jun Feng Guan. "Effect of Radial Inertia Confinement on Dynamic Compressive Strength of Concrete in SHPB Tests." Applied Mechanics and Materials 438-439 (October 2013): 215–19. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.215.

Повний текст джерела

Анотація:

This paper extends the study of Dharan on the stress state in an elastic solid specimen subjected to axial strain acceleration to compressible materials. And an improved Dharan model is presented. Based on the Drucker-Prager strength criterion, analytical equations of the radial inertia confinement effect on dynamic compressive strength of concrete in split Hopkinson pressure bar tests is derived. Comparison and discussion on the analytical, experimental and numerical results are performed. It is proved that the strain rate effect of compressive strength of concrete materials is a pseudo mater

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Hamid, Nur Hasmiza Abdul, Mansur Ahmad, and Mohd Nazip Suratman. "Bending and Compression Properties of Malaysian Medium Hardwood in Orthotropic Directions Kelat (Syzygium spp.)." Applied Mechanics and Materials 330 (June 2013): 938–41. http://dx.doi.org/10.4028/www.scientific.net/amm.330.938.

Повний текст джерела

Анотація:

Wood behaves differently in three independent orthotropic directions, namely radial, tangential and longitudinal. Determination of mechanical properties of wood and the study on the orthotropic behavior could enhance effective utilization of wood as construction material. Kapur and Kelat are two commercial medium hardwoods that are found abundantly in the east-coast of Malaysia. The purpose of the study is to determine the variation of bending and compression strength properties of Kapur and Kelat in three different anatomical directions. Bending and compression tests on small clear specimens

Стилі APA, Harvard, Vancouver, ISO та ін.

44

NAKAMURA, R., E. HORII, and T. IMAEDA. "Excessive Radial Shortening in Kienböck’s Disease." Journal of Hand Surgery 15, no. 1 (1990): 46–48. http://dx.doi.org/10.1016/0266-7681_90_90046-7.

Повний текст джерела

Анотація:

Two patients with Kienböck’s disease who had been treated by radial shortening developed ulnar wrist pain post-operatively due to excessive radial shortening. In both cases, ulnar shortening was required to improve symptoms and function. Excessive radial shortening can cause ulnar wrist pain and compromise the improvement of grip strength and range of motion of the wrist.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Aleksandrov, N. M., V. D. Veshutkin, A. E. Zhukov, I. D. Veshaev, D. A. Kuptsov, and O. I. Uglev. "Factors of radial bone strength after marginal defect formation." Genij Ortopedii 27, no. 2 (2021): 187–98. http://dx.doi.org/10.18019/1028-4427-2021-27-2-187-198.

Повний текст джерела

Анотація:

Purpose To determine the effect of biometrical parameters of the radial bone and due to edge defect formed on the radius strength properties using calculation methods. Materials and methods The study of bone strength affecting factors was conducted with the aid of experimental and calculation methods. Biometrical parameters were studied in 10 pairs of the human cadaveric radius as an intact bone initially and after the formation of rectangular or triangle-shaped edge cuts. To determine the stress-strain behaviour, mathematical calculations were performed based on the beam flexural theory for i

Стилі APA, Harvard, Vancouver, ISO та ін.

46

SAITO, Kiyoshi, and Kosuke YAMAMOTO. "ULTIMATE STRENGTH EVALUATION METHOD OF RADIAL GATE STRUT ARMS." Doboku Gakkai Ronbunshuu A 66, no. 4 (2010): 596–612. http://dx.doi.org/10.2208/jsceja.66.596.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Zhuang, Bin, Noé Lugaz, Nada Al-Haddad, et al. "Evolution of the Radial Size and Expansion of Coronal Mass Ejections Investigated by Combining Remote and In Situ Observations." Astrophysical Journal 952, no. 1 (2023): 7. http://dx.doi.org/10.3847/1538-4357/acd847.

Повний текст джерела

Анотація:

Abstract A fundamental property of coronal mass ejections (CMEs) is their radial expansion, which determines the increase in the CME radial size and the decrease in the CME magnetic field strength as the CME propagates. CME radial expansion can be investigated either by using remote observations or by in situ measurements based on multiple spacecraft in radial conjunction. However, there have been only few case studies combining both remote and in situ observations. It is therefore unknown if the radial expansion in the corona estimated remotely is consistent with that estimated locally in the

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Zhang, Wei, Wei-yao Guo, and Zhi-qi Wang. "Analytical and Modelling Study on the Spatial Stress Distribution and Failure Process of Disc Specimen in the Brazilian Splitting Test." Geofluids 2021 (December 22, 2021): 1–10. http://dx.doi.org/10.1155/2021/4716303.

Повний текст джерела

Анотація:

To correctly obtain the spatial stress distribution and failure process of disc specimen in the Brazilian splitting test, an analytical solution of three-dimensional stress is deduced. Then, the effects of height-diameter ratio and clamp radian on the spatial stress distribution and failure process are analyzed and studied combined with numerical modelling. At last, the influence of spatial effect on the tensile strength of disc specimen is discussed. The results show that the cracks firstly generate at the two ends of the specimen in the axial direction and then extend due to the nonuniform d

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Kekatpure, Aashay L., Sushil Mankar, Nilesh Joshi, Pratik Gaikwad, Shalva Natu, and Sanjay Deshpande. "Functional Outcomes After Open Reduction and Internal Fixation of Type II and Type III." Journal of Datta Meghe Institute of Medical Sciences University 20, no. 2 (2025): 414–19. https://doi.org/10.4103/jdmimsu.jdmimsu_110_22.

Повний текст джерела

Анотація:

Abstract Background: Surgically repairing radial head fractures through open reduction and internal fixation (ORIF) can pose challenges, making radial head resection a recognized treatment option. Objective: In this research, we examined the outcomes of various methods employed in radial head resection and contrasted them with those of ORIF in individuals experiencing a compressed radial head fracture. Materials and Methods: Twenty-one individuals aged 18 years and above, diagnosed with Mason type II and III radial head fractures, participated in this study. Among them, 14 patients received ra

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Shan, Lei, Hanzhou Wang, Shuo Diao, Junlin Zhou, and Dong Wang. "Double vs single plating could not improve the functional recovery of type C distal radius fractures involved with radial column: a preliminary retrospective cohort study (PRCS)." International Journal of Surgery Open 62, no. 4 (2024): 308–14. http://dx.doi.org/10.1097/io9.0000000000000131.

Повний текст джерела

Анотація:

Background: This study compared the curative effects of double plates (volar plate combined with radial column plate) and single plate (volar plate) on type C distal radius fractures involved with radial column. Methods: A 5-years retrospective cohort study was conducted in patients with distal radius fractures involved with radial column from January 2016 to January 2021. The single plate group patients were 5:1 matched with the double plates group patients according to the age and sex. Primary outcome was the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. Besides, the secon

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!